Items where Subject is "T Technology > TJ Mechanical engineering and machinery > TJ212-225 Control engineering systems. Automatic machinery (General)"

A

Abd. Rahman, Ramhuzaini and Sepehri, Nariman (2017) Experimental comparison between proportional and PWM-solenoid valves controlled servopneumatic positioning systems. Transactions of the Canadian Society for Mechanical Engineering, 41 (1). pp. 65-83. ISSN 0315-8977 (Submitted)

Abdul Rahman, Azman (2011) Liquid mixture control system using PLC. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Wahab, Siti Nur Wahidah (2014) Motor control system development using microcontroller based on PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohamad Syah Rizal (2013) Neural network controller design for position control system improvement. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Mohd Hafizul Afifi (2021) Improved personalised data modelling using parameter independent fuzzy weighted k-nearest neighbour for spatio/spectro-temporal data. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Afarulrazi (2006) Graphical user interface (GUI) for supervisory control of computer integrated manufacturing (CIM-70A) using SCADA. Masters thesis, Universiti Tun Hussein Malaysia.

Abu Bakar, Afarulrazi (2006) Graphical user interface (GUI) for supervisory control of computer intergtated manufacturing (CIM-70A) using SCADA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abusalim, Ghazi W. G. (2020) Modelling a hybrid system pv/wind grid connected with static synchronous compensator (STATCOM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Norhidayah (2013) Linear quadratic gaussian (LQG) controller for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.

Al-Alimi, Abdulmoghni Wazae and Cholan, Noran Azizan and Salam, Sameer and Kamil, Yasmin Mustapha and Mohamed Ahmed, Mahmoud Hazzaa and Mahdi, Mohd Adzir (2021) Brillouin-Raman fiber laser with switchable wavelength spacing based on Brillouin pump distribution. Results in Physics, 25. ISSN 2211-3797

Alias, Nor Akmal (2013) Linear quadratic regulator (LQR) controller design for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.

Alimi, Zainal Abidin (2015) The auto assist bar system for disabled people. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alir, Afifah (2013) Simulation of speed tracking for brushless DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Awang Adi @Jumaat, Md. Syadiqin (2004) Penghasilan papan pengawal mikro (PPM) dan kesesuaian penggunaannya kepada Pelajar Diploma Kejuruteraan Elektronik di Politeknik Ungku Omar, Ipoh, Perak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Awang Besar, Julkifli (2013) Quadrotor stability using PID. Masters thesis, Universiti Tun Hussein Malaysia.

C

Chairol Mohd Feroz, Kairil Fariq (2014) Vehicle tracking and speed estimation for traffic surveillance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Charishun, Mohamad Rofiq and Yusof, Anizam Mohamed and Ab. Rahman, Azmanirah (2021) Simulation of mobile hybrid power generator system development and energy consumption monitoring applications. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 79-87. ISBN 978-967-2817-45-1

Che Lah, Muhammad Shukri (2020) Construction of symmetry triangular fuzzy number procedure (STFNP) using statistical information for autoregressive forecasting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Ken Leong (2013) Programmable logic controller based variable speed drives for educational trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama A (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

H

Hamzah, Abdulwahhab Essa (2018) Design and implement WSN/IOT smart parking management system using microcontroller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Haron, Hartini Sharninayati (2013) Linear quadratic regulator (LQR) controller design for DC Servo motor. Masters thesis, Universiti Tun Hussein Malaysia.

Hat, Mohd. Kamal (2004) Pembinaan pakej trainer board mikro pengawal 16F84 : kajian terhadap kesesuaian penggunaanya sebagai ABBM bagi mata pelajaran sistem mikropemproses dan mikro pengawal di kalangan Pelajar Kejuruteraan Elektrik pada peringkat ijazah pertama di KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

I

Ismail, Nurfakhirah (2013) Fuzzy logic controller design for inverted pendulum system. Masters thesis, Universiti Tun Hussein Malaysia.

J

J., Kavikumar and D., Nagarajan and Said, Broumi and F., Smarandache and M., Lathamaheswari and Ebas, Nur Ain (2019) Neutrosophic general finite automata. Neutrosophic Sets and Systems.

Jaafar, Lizawati (2013) Automatic room temperature control. Masters thesis, Universiti Tun Hussein Malaysia.

Jalani, Jamaludin (2005) Control strategies for automatic gantry crane system. Masters thesis, International Islamic University Malaysia.

Jalani, Noor Hisham (2008) Position control for linear motion servo system via nominal characteristic trajectory following controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jum’azulhisham, Abdul Shukor and Muhammad Al-Hapis, Abdul Razak and Azmi, Hassan and Jamian, Rahim (2021) Application of clean agents in fire suppression systems: an overview. In: Progress in Engineering Technology III. Springer, pp. 315-330.

K

Kamardan, M.Ghazali and Sufahani, Suliadi Firdaus and Othman, M Z M. and Che-Him, Norziha and Khalid, Kamil and Roslan, Rozaini and Ali, Maselan and Zaidi, A M A. (2018) A mathematical model development for the lateral collapse of octagonal tubes. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Kamsan, Siti Zulalina and Mohd Affandi, Nur Iman and Mohd Nazri, Nurul Athirah and Jailani, Nureen Syafiqah and Sundramorthy, Saranya and Rajasakar, Kirthana and Nathan, Shelena Soosay (2021) Mobile application challenges. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 1-9. ISBN 978-967-2389-28-6 (Submitted)

Kek, Sie Long and Sim, Sy Yi and Chen, Chuei Yee (2019) An expanded optimal control policy for a coupled tanks system with random disturbance. Advances in Pure Mathematics, 9 (4). pp. 317-329. ISSN 2160-0368

Ku Khalif, Ku Muhammad Naim and Abu Bakar, Ahmad Syafadhli and Gegov, Alexander and Aminuddin, Adam Shariff Adli and Mohd Safar, Noor Zuraidin (2019) A reliability based consistent fuzzy preference relations for risk assessment in oil and gas industry. In: 9th Int. Conf. on Geotechnique, Construction Materials and Environment, 20-22 November 2019, Tokyo, Japan.

L

Lee, Ming Fong and Goh, W.K. and Tan, K.H. (2018) Meningkatkan kemahiran dan penguasaan topik hidroponik murid darjah enam dengan teknik DIY. Online Journal for TVET Practitioners, 1 (NIL). pp. 1-5. ISSN 2289-7410

Lim, Boon Ping (2002) Mengenalpasti masalah dalam pembelajaran amali PLC ( Programmable Logic Controller) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

M

Mansor, Mohamad Norani (2005) An improvement to integrated model of electro pneumatic circuit for material handling in a manufacturing cell. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Masdar, Aizan (2016) Development of a wireless current controlled stimulator for individuals with spinal cord injury. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Nur Syahirah (2020) Model reference adaptive control for one dof hand rehabilitation robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Sulaiman (2018) Enhancement of non-motorized three degree of freedom assessment tool for stroke patients. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jamal, Muhammad Hazwan (2013) Modelling and control of the fish feeder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Husni, Nur Amirah (2019) Force control for one degree of freedom haptic device using PID Controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Abdou Mani (2022) Artificial neural network technique to predict the power output of photovoltaic for monocrystalline and polycrystalline. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Abdulhakim Abdullah Al-Ezzi (2017) Development of telemedicine system for remote biomedical operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Fadhali, Najib (2019) Integrated influential factors (iifs) model of internal stakeholders as an adaptive control system to curb projects completion delay in Yemen. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fahmi, Mohd Fahmi and Manshoor, Bukhari and Khalid, Amir and Mohd Al-Hafiz, Mohd Al-Hafiz (2013) Numerical study of circle fractal grid perforated plate as a turbulent generator in combustion chamber. In: The 2nd International Conference on Recent Advances in Automotive Engineering & Mobility Research, Kuala Lumpur.

Mohd Yusoff, Ainul Husna (2019) System identification and pid control of toothbrush simulator system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohsen Ali, Bassam Hasan (2017) Design and development of portable home based rehabilitation device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Morrison Buah, Lorothy (2012) Supervisory control for conventional unitary air conditioning system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Arif Abidin (2015) Improving PID controller of motor shaft angular position by using genetic algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Ramli Narayanan, Nurhayati (2021) The fabrication of TiO2 nanostructures on porous silicon for thermoelectric application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Ng, Kok Mun (2006) A graphical method for automatic code generation from extended s-system petri net models. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Kok Mun (2006) A graphical method for automatic code generation from extended s-system petri net models. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Nik Mahmod, Nik Firdaus (2015) Smartphone-based robot control for localisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Salim, Nor Adrian and Asmuin, Norzelawati and Hariri, Azian and Sies, M. Farid and Zakaria, Hanis and Idris, Ahmad Fu’ad and Afandi, Azizi and Bosiran, M. Asrul and Taib, Ishkrizat and Tajul Arifin, Ahmad Mubarak (2022) Experimental investigation on filtration and cooling effect of kitchen hood ventilation system from water-mist recirculation spray: water mist spray cycle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 64-79. ISSN 2289-7879

Nur Yunus, Faizal Amin and Mohd Salleh, Zuan Azhary and Rahim, Mohd Bekri and Mohd Affandi, Haryanti and Kamis, Arasinah and Mustafa, Mohd Syafiq Syazwan (2023) Field Measurement of Air Velocity and Temperature Factors that Influence the Thermal Comfort in Shuttle Bus. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (2). pp. 164-171. ISSN 2289-7879

O

Omar, Abdul Hakim (2019) Energy harvesting using ocean data acquisition system (ODAS) buoy for coral reef monitoring. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Zafrul Azman (2015) Real time monitoring for tank level based on ISA100.11A using star topology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Fahmi and Manshoor, Bukhari and Khalid, Amir (2013) Circle grid fractal plate as a turbulent generator for premixed flame: an overview. In: 2nd InternationalConferenceonMechanicalEngineeringResearch(ICMER2013), 1-3 July 2013, Kuantan, Pahang.

Othman, Zulhairi (2005) Comparison of RLL, state diagram, grafcet and petri net for the realization of logic controller. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

R

Raja Abd Assiss, Raja Fairol Farouk (2021) Pemetaan zon potensi tanah runtuh bagi jalan persekutuan dan jalan negeri di negeri Johor menggunakan kaedah jumlah ramalan bencana (TEHD). Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Sadikan, Siti Fairuz Nurr (2021) A framework of integrated continuous online learner with fuzzy neural network application in learning environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sadun, Amirul Shafiq (2018) Active compliance control strategies for multifingered robot hand. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saleh Al-Gahdari, Abdulaziz Shaif (2015) Development of mobile robot in virtual reality environment for educational purpose. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shamsudin, Saffi Iswadi and Bakar, Lilywati (2020) Smart emergency traffic light system. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Sidik, Mohd Azkar (2015) AC motor speed performance improvement using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tee, Kian Sek (2007) A training model of an automated storage and retrieval system (AS/RS) with customized Warehouse Management System (WMS). Masters thesis, Universiti Tun Hussein Malaysia.

Tee, Kian Sek (2007) A training model of an automated storage and retrieval system (AS/RS) with customized warehouse management system (WMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tee, Kian Sek (2007) A training model of an automated storage and retrieval system (AS/RS) with customized warehouse management system (WMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Abas, Wan Hamidah (2014) Online position control system using incremental fuzzy control. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Mohd, Wan Syahidah (2013) Linear quadratic gaussian (LQG) controller design for servo motor. Masters thesis, Universiti Tun Hussein Malaysia.

Y

Yaziz, Nor Hidayah (2014) Digital speed and position control system incorporating an Incremental encoder. Masters thesis, Universiti Tun Hussein Malaysia.

Z

Zainal, Nur Saadah and Mohamad, Zaleha and Mustapa, Mohammad Sukri and Badarulzaman, Nur Azam and Abdul Salim, Zainathul Akhmar Salim and Masirin, Mohd Idrus (2018) Study of characteristics of rice husk and silica obtained from rice husk. International Journal of Chemical Engineering and Applications, 9 (5). pp. 158-162. ISSN 2010-0221

Zawawi, Mukmin (2008) Alarm design for SCADA system of assembly CELL-200 trainer. Masters thesis, Universiti Tun Hussein Malaysia.

Zawawi, Mukmin (2008) Alarm design for SCADA system of assembly cell-200 trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.