Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Manufacturing Engineering" and Year is 2018

A

Abd Rahim, Erween and Dorairaju, Hemarani (2018) Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining. Measurement, 123. pp. 213-225. ISSN 0263-2241

Abd Rahim, Erween and Jaafar, Mohd Noor and Mohid, Zazuli and Ibrahim, Mohd Rasidi and Ahmad, Said (2018) A study on cryogenic supercritical carbon dioxide coolant delivery technique when machining of AISI 1045 steel. Journal of Mechanical Engineering, 5 (3). pp. 37-49. ISSN 1823- 5514

Abd Razak, Noor Syafiqa (2018) Development and evaluation of ergonomics and psycosocial assessment method for assessing work-related upper limb disorders. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdol Rahman, Mohd Nasrull and Ahmad Zuhaidi, Muhammad Fareez (2018) Exposure level of ergonomic risk factors in grocery retail industries. Journal of Engineering and Applied Sciences, 13 (8). pp. 6354-6358. ISSN 1816-949X

Abdul Haq, Reazul Haq and Marwah, Omar Mohd Faizan and Abdol Rahman, Mohd Nasroll and Ho, Fu Haw and Abdullah, Haslina and Ahmad, Said and Tajul Ariffin, Ahmad Mubarak and Hassan, Mohd Fahrul and Yunos, Muhamad Zaini (2018) Mechanical properties of PCL/PLA/PEG composite blended with different molecular weight (MW) of PEG for Fused Deposition Modelling (FDM) filament wire. The International Journal of Integrated Engineering, 10 (5). pp. 187-192. ISSN 2229-838X

Abdul Patar, Mohd Affifudin and Kamdi, Z. (2018) Influence of deposition parameter to wear behaviour of tungsten carbide-nickel (WC-Ni) high velocity oxyfuel (HVOF) coating. Journal of Science and Technology, 10 (4). pp. 64-70. ISSN 2600-7924

Abdul Rahman, Norasulaini (2018) Statistical process control in stamping process using pattern recognition approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Syahrul Aziana and Abdol Rahman, Mohd Nasrull (2018) A systematic review for computer based observational techniques for assessing exposure to risk factors for work-related musculoskeletal disorders. International Journal of Engineering & Technology, 7 (3.2). pp. 60-65. ISSN 2227-524X

Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Harun, Zawati and A. Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana and Rezaei, Masoud and Hubadillah, Siti Khadijah (2018) Carbon dioxide capture using a superhydrophobic ceramic hollow fibre membrane for gas-liquid contacting process. Journal of Cleaner Production, 140 (3). pp. 1731-1738. ISSN 0959-6526

Abdullah, Haslina and Tuan Zahari, Tuan Muhammad Lutfi and Zakaria, Mohamad Shukri (2018) Simulation of ant colony optimization on hole making performance. In: Innovative research and industrial dialogue 2018, 18 July 2018, UTEM.

Abdullahi, Tijjani and Ahmad, Norhayati and Wahit, Mat Uzir and Harun, Zawati (2018) Adhesive bonding of thermoplastic polyurethane with metallic wire. Advanced Science Letters, 24 (6). pp. 4045-4049. ISSN 1936-6612

Abdullahi, Tijjani and Harun, Zawati and Dzarfan Othman, Mohd Hafiz and Aminu, Nasiru and Gabriel, Oguntunde and Aminu, Tijjani and Ibrahim, Siti Aida and Kamarudin, Noor Hasliza (2018) West African kenaf (Hibiscus Cannabinus L.) natural fiber composite for application in automotive industry. Malaysian Journal of Fundamental and Applied Sciences, 14 (4). pp. 397-402. ISSN 2289-5981

Abdulmalik, Samir Sani and Ahmad, Rosli (2018) Influence of friction stir process on microstructure and tensile properties of LM28 hypereutectic al-si alloy. International Journal of Integrated Engineering: Special Issue 2018: Center for Graduate Studies, 10 (3). pp. 63-68. ISSN 2229-838X

Abdulmalik, Samir Sani and Ahmad, Rosli and Usman, O Y (2018) Microstructure and tensile properties of friction stir processed Al-Si alloy. Saudi Journal of Engineering and Technology (SJEAT), 3 (9). pp. 593-597. ISSN 2415-6272

Ahmad, Noor Aqilah and Kamdi, Zakiah and Mohd Tobi, Abdul Latif (2018) Wear and corrosion behavior of tungsten carbide based coating on carbon steel. International Journal of Integrated Engineering, 10 (4). pp. 119-125. ISSN 2600-7916

Ahmad, R. and Elaswad, A.M.M. and Hamzah, M. Z. and Shahizan, N. R. (2018) Solidification, microstructure and mechanical properties of Mg-2.8Nd-1.5Gd-0.5Zn-0.5Zr cast alloy with erbium addition. MATEC Web of Conferences, 202 (01001). pp. 1-5. ISSN 2261-236X

Ahmad, Said and Lajis, Mohd Amri and Abdul Haq, Reazul Haq and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Ho, Fu Haw and Abdullah, Haslina and Hassan, Mohd Fahrul (2018) Surface roughness and surface topography of inconel 718 in powder mixed dielectric electrical discharge machining (PMEDM). International Journal of Integrated Engineering: Special issue 2018: Mechanical Engineering, 10 (5). pp. 181-186. ISSN 2229-838X

Ahmad Jamal, Ezazul Fahmee and Hashim, Mohd Yusni and Othman, Mohd Hilmi and Marwah, Omar Mohd Faizan and Mohd Amin, Azriszul and Johar, Muhammad Akmal and Ng, Chuan Huat (2018) Optimization of alkali treatment condition on tensile properties of kenaf reinforced polyester composite using response surface method. The International Journal of Integrated Engineering, 10 (1). pp. 40-46. ISSN 2229-838X

Aisyah, H.A. and Paridah, M.T. and Khalina, A. and Sapuan, S.M. and Wahab, Mohd Saidin and Berkalp, O.B. and Lee, C.H. and Lee, S.H. (2018) Effects of fabric counts and weave designs on the properties of laminated woven kenaf carbon fibre reinforced epoxy hybrid composites. Polymers, 10 (12). pp. 1320-1349. ISSN 2073-4360 (Unpublished)

Akhair, S. H. M. and Harun, Z. and Basri, H. and Ahmad, R. A. R. and Rashid, A. Q. A. and Azhar, F. H. (2018) Hydrophobicity properties of graphite and reduced graphene oxide of the polysulfone (PSf) mixed matrix membrane. International Journal of Engineering Transactions B: Applications, 31 (8). pp. 1381-1388. ISSN 1728-144X

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Mohd Saidin and Saiman, Mohd Pahmi (2018) Evaluation of kenaf yarn properties as affected by different linear densities for woven fabric laminated composite production. Sains Malaysiana, 47 (8). pp. 1853-1860. ISSN 0126-6039

Alias, Siti Salwa and Harun, Zawati and Abd Latif, Intan Suyana (2018) Characterization and performance of porous photocatalytic ceramic membranes coated with TiO2 via different dip-coating routes. Journal of Materials Science, 53. pp. 11534-11552. ISSN 0022-2461

Amiril, S.A.S. and Rahim, E.A. and Embong, Z. and Syahrullail, S. (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X

Amkpa, Job Ajala and Badarulzaman, Nur Azam (2018) Thermal assessment of kpata fireclay for refractory applications. Advanced Materials Characterization Techniques, 1 (1S). pp. 179-184. ISSN 2581-4311

Azhar, Faiz Hafeez and Harun, Zawati and Yunos, Muhamad Zaini and Ahmad, Azlinorazia and Mohd Akhair, Siti Hajar and Raja Ahmad, Raja Adibah and Abd Rashid, Abdul Qaiyyum and Hussin, Rosniza and Ibrahim, Siti Aida and Ahmad, Mohd Khairul (2018) Significant effect of concentration ratio in synthesizing titania nanoflowers (TNF) powder via facile hydrothermal method. Malaysian Journal of Fundamental and Applied Sciences, 14 (3). pp. 397-402. ISSN 2289-5981

Azhar, Mohd Faiz Hafeez (2018) The effect of flower-like tatania towards characteristics and performance of polysulfone mixed matrix membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Mohd Azham and Yahya, S.M. and Ahmad, Sufizar and Mahzan, Shahruddin and Taib, M. and Abd.Rahman, Hamimah and Taib, Hariati (2018) Effect of silica (SiO2) filler on thermal stability of polysiloxane composites. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 48 (2). pp. 117-124. ISSN 2289-7879

B

Badrishah, Noor Shafawati (2018) A study on laser engraving process parameters and performance characteristics for wood base materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baharuddin, Nurul Akidah and Abd. Rahman, Hamimah and Muchtar, Andanastuti and Sulong, Abu Bakar and Abdullah, Huda (2018) Effects of deposition time and counter-electrode size on the fabrication of lscf-sdc carbonate composite cathode for sofc. Sains Malaysiana, 43 (4). pp. 595-601. ISSN 0126-6039

D

Din, Abdul Talib and Mohd Hafiz, Norzawahir and Mohd Rus, Anika Zafiah (2018) Exploration to find green building materials from recycled solid wastes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 35-44. ISSN 2289-7879

H

Hamdan, Nur Izzah and Zainulabidin, Muhd Hafeez and Kasron, Md Zainorin and Ismail, Al Emran and Kassim, Angzzas Sari (2018) Effect of perforation size on sound absorption characteristics of membrane absorber. International Journal of Integrated Engineering, 10 (4). pp. 27-34. ISSN 2229-838X

Hanapi, Muhammad Ikhmal and Ahmad, Sufizar and Taib, Hariati and Chee, Chen Tan (2018) Effect of sintering temperature and AR glass addition towards physical properties of porcelain clay for sewer pipes application. International Journal of Integrated Engineering, 10 (3). pp. 83-87. ISSN 2229-838X

Harun, Zawati and Tze, Ching Ong and Matsuura, Takeshi and Hubadillah, Siti Khadijah and Dzarfan Othman, Mohd Hafiz and Ismail, Ahmad Fauzi (2018) Modelling of transport mechanisms and drying shrinkage for multilayer ceramic membrane structure. Chemical Engineering Research and Design, 133. pp. 111-125. ISSN 0263-8762

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Marwah, Omar Mohd Faizan and Othman, Mohd Hilmi and Johar, Muhammad Akmal and Ng, Chuan Huat and Mamat, S.B. (2018) Interfacial shear, tensile strength and young modulus of kenaf fiber: the effects from different settings of alkali treatment. Key Engineering Materials, 791. pp. 10-18. ISSN 1662-9795

Hasmuni, Noreriyanti and Ibrahim, Mustaffa and Raus, Azli Amin and Wahab, Mohd Saidin and Kamarudin, Khairu (2018) Porosity effects of AlSi10mg parts produced by selective laser melting. Journal of Mechanical Engineering, 5 (4). pp. 246-255. ISSN 2550-164X

Hassan, S. and Yusof, M. S. and Embong, Z and Ding, S. and Maksud, M. I. (2018) Surface study of graphene ink for fine solid lines printed on BOPP Substrate in micro-flexographic printing using XPS analysis technique. IOP Conference Series: Materials Science and Engineering, 298. pp. 1-6. ISSN 1757-899X

Haw, Ho Fu and Abdul-Rashid, Salwa Hanim and Raja Ghazilla, Raja Ariffin (2018) Analytic hierarchy process-based analysis to determine the barriers to implementing a material efficiency strategy: electrical and electronics’ companies in the Malaysian context. Sustainability, 8 (10). pp. 1-16. ISSN 2071-1050

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Jamalludin, Mohd Riduan and Mohd Zahar, Mohd Izzat Iqbal and Ismail, Ahmad Fauzi and A. Rahman, Mukhlis and Jaafar, Juhana (2018) High strength and antifouling metakaolin-based ceramic membrane for juice clarification. Journal of the Australian Ceramic Society, 55. pp. 529-540. ISSN 2510-1560

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Matsuuraa, Takeshi and Ismail, A.F. and A. Rahman, Mukhlis and Harun, Zawati and Jaafar, Juhana and Nomur, Mikihiro (2018) Fabrications and applications of low cost ceramic membrane from kaolin: a comprehensive review. Ceramics International, 44. pp. 4538-4560. ISSN 0272-8842

I

Ibrahim, Siti Aida and Zainal Alam, Abdul Hadi and Hussin, Rosniza and Kamdi, Zakiah and Mohamed Hatta, Mohamed Nasrul and Ainuddin, Ainun Rahmahwati and Yunos, Muhamad Zaini (2018) Effect of calcination temperature on (N, Fe) doped TiO2 nanoparticles. Journal of Science and Technology, 10 (2). pp. 44-48. ISSN 2600-7924

Idris, Maizlinda Izwana and Jan, Zaloga and Detsch, Rainer and Roether, Judith A. and Unterweger, Harald and Alexiou, Christoph and Boccaccini, Aldo R. (2018) Surface modifcation of SPIONs in PHBV microspheres for biomedical applications. Scientific Reports, 8 (7286). pp. 1-11. ISSN 2045-2322

J

Jamalludin, Mohd Riduan and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Hubadillah, Siti Khadijah and Yunos, Muhamad Zaini and Ismail, Ahmad Fauzi (2018) Morphology and property study of green ceramic hollow fiber membrane derived from waste sugarcane bagasse ash (WSBA). Ceramics International, 44 (15). pp. 18450-18461. ISSN 0272-8842

Jamalludin, Mohd Riduan and Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Yunos, Muhamad Zaini (2018) Novel superhydrophobic and superoleophilic sugarcane green ceramic hollow fibre membrane as hybrid oil sorbent-separator of real oil and water mixture. Materials Letters, 240. pp. 1-11. ISSN 0167-577X

Jamalludin, Mohd Riduan and Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Yunos, Muhamad Zaini and Ismail, Ahmad Fauzi and Wan Salleh, Wan Norharyati (2018) Facile fabrication of superhydrophobic and superoleophilic green ceramic hollow fiber membrane derived from waste sugarcane bagasse ash for oil/water separation. Arabian Journal of Chemistry, 13 (1). pp. 3558-3570. ISSN 1878-5352

Job Ajala, Amkpa and Badarulzaman, Nur Azam (2018) Study of physio-mechanical properties of refractory fireclay for production of furnace lining. Advanced Science Letters, 24 (6). pp. 3940-3944. ISSN 1936-6612

K

Kamarudin, Noor Hasliza and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Hubadillah, Siti Khadijah and Yusof, Khairul Nazri and Jamaluddin, M.R. (2018) Preliminary characterization of corn cob ash as an alternative material for ceramic hollow fiber membrane (CHFM/CCA). International Journal of Engineering, 31 (8). pp. 1389-1397. ISSN 1735-9244

Kamdani, K. and Hamsah, A.A. and Rafai, N.H. and Rahim, M.Z. and Wong, C.K. and Chong, Y. L. (2018) Study of cutting force and surface roughness on drilling stainless steel 316L under various coolant condition. Key Engineering Materials, 791. pp. 116-122. ISSN 1662-9795

Kamdi, Zakiah and Badarulzaman, Nur Azam and Sukkeri, Muhammad Adeeb Reezan and Hassan, Muhammad Syafiq and Mohamed Hatta, Mohamed Nasrul and Ainuddin, Ainun Rahmahwati (2018) Evaluation of corrosion and wear behaviour of nickel tungsten carbide electrodeposited with different tungsten carbide concentration and current density. Journal of Science and Technology, 10 (2). pp. 38-43. ISSN 2600-7924

Kanasan, Nanthini and Adzila, S. and Rahman, H. A. and Bano, Nazia and Panerselvan, G. (2018) FTIR and XRD evaluation of magnesium doped hydroxyapatitesodium alginate powder by precipitation method. Key Engineering Materials, 791. pp. 45-49. ISSN 1662-9795

Kanasan, Nanthini and Sharifah Adzila, Syed Abu Bakar and Mustaffa, Nor Azimah and Abdol Rahman, Mohd Nasrull and Hassan, Mohd Fahrul and Panerselvan, Gurubaran (2018) Effect of sintering on hydroxyapatite/sodium alginate properties. International Journal of Integrated Engineering: Special Issue, 10 (3). pp. 78-82. ISSN 2229-838X

Khalid, Siti Nor Azila and Ismail, Al Emran and Zainulabidin, Muhd Hafeez and Tajul Arifin, Ahmad Mubarak and Hassan, Mohd Fahrul and Ibrahim, Rasidi and Rahim, Mohammad Zulafif (2018) Mechanical performances of twill kenaf woven fiber reinforced polyester composites. International Journal of Integrated Engineering, 10 (4). pp. 49-59. ISSN 2229-838X

Kormin, Shaharuddin and M. Rus, Anika Zafiah (2018) Liquefaction of oil palm fruit waste and its application for the development of polyurethane foams. International Journal of Engineering & Technology, 7 (3.14). pp. 366-374. ISSN 2227-524X

L

Lajis, M.A. and Hosni, N.A.J. (2018) The influences of various mixed dielectric fluids on the performance electrical discharge machining of AISI D2 hardened steel. Materials Science and Engineering Technology, 49. pp. 413-419. ISSN 0933-5137

Lee, T.C. and Ahmad, A.N. Aizat and Mohd Pu’ad, N.A.S. and Manap, N. and Abdullah, H.Z. and Idris, M.I. (2018) Adsorption efficiency of polyvinyl alcohol -alginate beads on Cr (VI): effect of pH and temperature. International Journal of Integrated Engineering, 10 (9). pp. 142-146. ISSN 2229-838X

Lee, Woon Kiow and Tuan Muda, Syed Mohamad Aiman and Ong, Pauline and Sia, Chee Kiong and Talib, Norfazillah and Saleh, Aslinda (2018) Application of wavelet analysis in tool wear evaluation using image processing method. International Journal of Engineering and Technology, 7 (4.36). pp. 426-431. ISSN 2227-524X

M

M. Rus, A. Z. and Kormin, S. (2018) Fabrication and characterization of polyurethane foam prepared from liquefied oil palm mesocarp fibre with renewable monomer made from waste cooking oil. Journal of Fundamental and Applied Sciences, 10 (2S). pp. 722-744. ISSN 1112-9867

M.A., Rabiatul Adawiyah and O., Saliza Azlina (2018) Comparative study on the isothermal aging of bare Cu and ENImAg surface finish for Sn-Ag-Cu solder joints. Journal of Alloys and Compounds, 740. pp. 958-966. ISSN 0925-8388

Mahadzir, M. A. and Hassan, Nurhafizzah and Khirotdin, Rd Khairilhijra' and Ngadiron, M. F. (2018) Overview of Printing Wearable Antenna. Journal of Fundamental and Applied Sciences, 10 (3S). pp. 397-411. ISSN 1112-9867

Mat Hassan, Nik Normunira and Shamsudin, Zainon Sharmila and Mohd Rus, Anika Zafiah and Sulong, Nurulsaidatulsyida (2018) Investigation of renewable polymer composite from waste oil endurance to UV irradiation exposure by using FTIR and UV-VIS. Journal of Mechanical Engineering, 5 (5). pp. 53-61. ISSN 1823- 5514

Mohamad, Siti Shafika (2018) A computing task ergonomic risk assessment tool for assessing risk factors of work related musculoskeletal disorders. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Siti Shafika and Abdol Rahman, Mohd Nasrull (2018) A review on prevalence and risk factors of musculoskeletal disorders (Msds) among VDT users. International Journal of Engineering & Technology, 7 (3.2). pp. 30-34. ISSN 2227-524X

Mohammad, Musli and Vattiyan, Ligesh Manni and Yahya, Mohd Shahir (2018) Decision support tools for selecting organisational improvement initiatives: a review. International Journal of Engineering and Technology, 7 (3.7). pp. 153-155. ISSN 2227-524X

Mohammad, Siti Fairus and Ahmad, Sufizar and Abdul rahman, Hamimah and Muchtar, Andanastuti (2018) Elucidation of morphological behavior on the samarium strontium cobaltite carbonate composite cathode for LTSOFC. International Journal of Current Science, Engineering & Technology, 1 (1). pp. 342-347. ISSN 2581-4311

Mohammed Usman, Abdullahi and Abdullah, Kamil (2018) Consolidation of water management and efficiency parameters for development of green building rating system. Journal of Built Environment, Technology and Engineering, 4. pp. 284-294. ISSN 0128-1003

Mohd Azahari, Muhammad Shafiq (2018) Physical and acoustic properties of petroleum and renewable based polyurethane foam filled with shorea leprosula. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Azahari, Muhammad Shafiq and M. Rus, Anika Zafiah and Kormin, Shaharuddin and Zaliran, M. Taufiq (2018) An acoustic study of shorea leprosula wood fiber filled polyurethane composite foam. Malaysian Journal of Analytical Sciences, 22 (6). pp. 1031-1039. ISSN 1394-2506

Muda, Rizamarhaiza and Ahmad, Sufizar and Abd. Rahman, Hamimah and Taib, H. (2018) The effect of sintering temperature on silica derived from rice husk ash - Nickel Oxide (SiO 2 -NiO) foam fabrication via slurry technique. Journal of Physics: Conference Series, 1082 (1). pp. 1-6. ISSN 1742-6588

Muda, Rizamarhaiza and Azmi, Mohd Azham and Mahzan, Shahruddin and Elwalwal, Hatem Mostafa and Ahmad, Sufizar and Taib, H. (2018) Effect of SiO2 solid loading and sintering temperatures on the physical properties of SiO2-NiO foam. Key Engineering Materials, 791. pp. 37-44. ISSN 1662-9795

Mustaffa, Nor Azimah (2018) Magnesium doped calcium phosphate sodium alginate biocomposite for bone implant application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

N, Mohamed and M.Z.M, Saman and S, Sharif and H.S., Hamzah (2018) Strategic factors on interpreting remanufacturing quality- Certifying framework to address warranty aftermarket for Malaysian industry. In: 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering 2017, ICMMPE 2017, 22 - 23 November 2017, Batu Ferringhi, Penang. (Submitted)

Ng, Kei Hoa and Abd. Rahman, Hamimah and Somalu, Mahendra Rao (2018) Influence of silver addition on the morphological and thermal characteristics of nickel oxide-samarium doped ceria carbonate (NiO-SDCC) composite anode. International Journal of Integrated Engineering, 10 (1). pp. 196-201. ISSN 2229-838X

O

Omar, Noor Irinah and Kang, Huai Tan and Taib, H. and Abd. Rahman, Hamimah (2018) Electrophoretic deposited LSCF-SDCC-Ag cathode coating on ferritic stainless steel interconnect for SOFC. Journal of Physics: Conference Series, 1082 (1). pp. 12-28. ISSN 1742-6588

Othman, M.H. and Ibrahim, M.H.I. and Amin, A.M. and Y,Hashim, M. and Ng, C.H. and Osman, S.A. and Marwah, O.M.F. and Shaari, M.F. and Rafai, N.H. and Johar, M.A. (2018) The optimisation of processing conditions and the effect of nanoclay towards snap fit samples. International Journal of Pure and Applied Mathematics, 118 (24). pp. 1-10. ISSN 1314-3395

Othman, M.H. and Ibrahim, M.H.I. and Amin, S.Y.M. and Abdullah, M.S. (2018) Preparation of injection moulding processing for high density polyethylene via moldflow advisor 2015 simulation. Advanced Science Letters, 24 (3). pp. 1817-1822. ISSN 1936-6612

Othman, M.H. and Osman, S.A. and Amin, S.Y.M. and Rosli, M.S. (2018) Modelling of integral hinges via CadMould 3d-F injection moulding simulation. JOURNAL OF ADVANCED RESEARCH IN DYNAMICAL AND CONTROL SYSTEMS, 10 (13). pp. 112-117. ISSN 1943-023X

Othman, Mohd Hilmi and Muhammad, Arif Izzudin and Hassan, Sulaiman (2018) Investigation of clothes recycling as colouring agent for polypropylene-nanoclay nanocomposites. International Journal of Technology and Engineering Studies, 4 (1). pp. 1-6. ISSN 2415-0924

R

Raveverma, P. and Ibrahim, M. and Sa'ude, N. and Yarwindran, M. (2018) Mechanical behaviour and compatibility analysis of thermoplastic polyurethane polycaprolactone-based new fused deposition modelling filament composite. Journal of Mechanical Engineering, 5 (2). pp. 116-128. ISSN 1823- 5514

Roslee, Darbi and Sabudin, Sulastri and Noor Ariffin, Nadhirah Aqilah and Jamari, Fathin Nadhirah and Mohideen Batcha, Mohd Faizal (2018) Design and development of downdraft gasifier to generate producer gas. The International Journal of Integrated Engineering, 10 (5). pp. 148-155. ISSN 2229-838X

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Ismail, Ahmad Fauzi and Jaafar, Juhana and Harun, Zawati and Aziz, Farhana and Mohamed, Mohamad Azuwa and Ohtani, Bunsho and Takashima, Mai (2018) Photocatalytic degradation of phenol over visible light active ZnO/Ag2CO3/Ag2O nanocomposites heterojunction. Journal of Photochemistry and Photobiology A: Chemistry, 364 (18). pp. 602-612. ISSN 1010-6030

S

S., N. Afiqah and M. Rus, Anika Zafiah and Abdullah, A. N. Aisyah and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Thermal degradation study of waste polymer matrix polypropylene and polyvinyl chloride as polymer matrix filled rice husk decking structure. International Journal of Engineering and Technology, 7 (3.28). pp. 266-270. ISSN 2227-524X

S., N. Afiqah and M. Rus, Anika Zafiah and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Waste polymer blended with copolymer polypropylene to enhance mechanical properties using injection moulding. International Journal of Engineering and Technology, 7 (3.28). pp. 252-257. ISSN 2227-524X

S., N. Afiqah and M. Rus, Anika Zafiah and Z., M. Zulhafiz and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Mechanical properties of wood polymer composites (WPCs) after prolonged ultra-violet (UV) irradiation exposure. International Journal of Engineering and Technology, 7 (3.28). pp. 258-260. ISSN 2227-524X

Sadikin, Azmahani and Mohd Bahrin, Mohd Khairul Anam and Ismail, Azzura and Ismail, Al Emran and Ahmad, Sufizar and Salleh, Salihatun and Abdol Rahman, Mohd Nasrull and Sapit, Azwan and Ayop, Sallehuddin Shah (2018) Numerical simulation in transient flow of non-newtonian fluid in nozzles during filling process. International Journal of Integrated Engineering, 3 (1). pp. 92-95. ISSN 2229-838X

Saleh Elfallah, Saleh Suliman and Mohamed Yunus, Mohd Radzi and Abdullah, Hasan Zuhudi (2018) Effect of UV irradiation on apatite deposition on anodised TiO2 coating formed under mixed acid solution. International Journal of Current Science, Engineering & Technology, 1 (1). pp. 88-94. ISSN 2581-4311

Sazali, N. and Wan Salleh, W. N. and Nur Izwanne, M. and Harun, Z. and Kadirgama, K. (2018) Precursor selection for carbon membrane fabrication: a review. Journal of Applied Membrane Science & Technology, 22 (2). pp. 131-144. ISSN 2600-9226

Sazali, Norazlianie and Wan Salleh, Wan Norharyati and Ismail, Ahmad Fauzi and Kadirgama, Kumaran and Moslan, Mohamad Shahrizan and Che Othman, Faten Ermala and Ismail, Nor Hafiza and Samykano, Mahendran and Harun, Zawati (2018) Effect of heating rates on the microstructure and gas permeation properties of carbon membranes. Malaysian Journal of Fundamental and Applied Sciences, 14 (3). pp. 378-381. ISSN 2289-5981

Shahizan, Nurul Raihan (2018) The influences of holmium on the solidification, microstructure and mechanical properties of elektron 21 magnesium alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shukri, Muhammad Shazwan and Marwah, Omar Mohd Faizan and Ibrahim, M. and Sharif, S. and Mohamad, Elmy Johana and Hashim, Mohd Yussni (2018) Collapsibility of PMMA based material in direct investment casting. Journal of Advanced Manufacturing Technology, 12 (1 (2)). pp. 501-512. ISSN 1985-3157

Sufian, N. A. and M. Rus, A. Z. and Syah, A. Shahrizan and M. J., Farhana Hazwanee and M., Noraini and I., S. Aida (2018) Tensile property of melt mixing co-polypropylene with waste polymer at different composition ratios. International Journal of Engineering and Technology, 7 (3.28). pp. 261-265. ISSN 2227-524X

Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah and Mat Hassan, Nik Normunira and Marsi, Noraini (2018) Spectroscopic studies of oils and its synthesized bio-polymer. Journal of Mechanical Engineering, 5 (3). pp. 50-60. ISSN 1823- 5514

T

T., Norfazillah and Amiril, S. A. S. and Rahim, E. A. and Saiful, A. C. G. and Syahrullail, S. (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232

Talib, Norfazillah and Md. Nasir, Ramdziah and Abd. Rahim, Erween (2018) Investigation on the tribological behaviour of modified jatropha oil with hexagonal boron nitride particles as a metalworking fluid for machining process. International Journal of Integrated Engineering, 10 (3). pp. 57-62. ISSN 2229-838X

Tan, K. H. and Rahman, H. A. and Taib, H. and Sazali, M. F. (2018) Electrophoretic deposition of Ba0.5Sr0.5Co0.8Fe0.2O3−∞SDC carbonate composite coating on solid oxide fuel cell interconnect. Malaysian Journal of Microscopy, 14 (1). pp. 88-94. ISSN 1823-7010

W

Wahab, Mohd Saidin and Ahmad Raus, Azli Amin and Amir, Irwan and Ahmed, Aqeel and Kamarudin, Khairu (2018) The thermal effect of variate cross-sectional profile on conformal cooling channels in plastic injection moulding. International Journal of Integrated Engineering, 10 (5). 156 -163. ISSN 2229-838X

Y

Yusof, M Sallehuddin and Fadilullah, M Zul Nadzmi and Hassan, Suhaimi and Maksud, M Idris and Yunos, Muhamad Zaini (2018) Development of coated peanut separator and frying skillet machine. International Journal of Integrated Engineering, 10 (5). pp. 142-147. ISSN 2229-838X

Z

Zakaria, Nur Syuhada (2018) A framework for green manufacturing practicies in small and medium enterprises in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.