Items where Subject is "T Technology > TS Manufactures"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 97.

Bulletin

UNSPECIFIED (2022) Buletin Institut Kejuruteraan Integrasi Jan-Mac 2022. [Bulletin] (Unpublished)

Article

Abdol Rahman, Mohd Nasrull and Masood, Ibrahim and Awalludin, Nur Farahanim and Hassan, Mohd Fahrul (2017) Ergonomic risk factors associated with muscuslokeletal disorders in computer workstation. International Journal of Applied Engineering Research, 12 (7). pp. 1355-1359. ISSN 0976-4259

Abdol Rahman, Mohd Nasrull and Mohamad, Siti Shafika (2017) Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work. WORK: A Journal of Prevention, Assessment & Rehabilitation, 57 (1). pp. 69-77. ISSN 1051-9815

Abdul Kadir, Aini Zuhra and Yusof, Yusri and Wahab, Md Saidin (2020) Additive manufacturing cost estimation models—a classification review. The International Journal of Advanced Manufacturing Technology, 107 (NIL). pp. 4033-4053. ISSN 0268-3768

Abu Seman, Noor Aslinda and Zakuan, Norhayati and Rashid, Umi Kartini and Nasuredin, Juzaimi and Ahmad, Nurazwa (2018) The level of adoption of green supply chain management and green innovation in Malaysian manufacturing industries. International Journal of Research, 5 (20). pp. 1556-1575. ISSN 2348-6848

Adi, Nazir and Mohamad, Arifha and Wan Yusoff, Wan Fauziah (2022) Does board behaviour matter for board effectiveness in Small and Medium Industries (SMEs)?: a preliminary observation. Malaysian Journal of Social Sciences and Humanities, 7 (2). pp. 1-8. ISSN 2504-8562

Ahmad, Azlan and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah (2018) Conjectured the behaviour of a recycled metal matrix composite (mmc–alr) developed through hot press forging by means of 3d fem simulation. materials, 11 (6). pp. 1-14. ISSN 1996-1944

Ahmad, Nurazwa and Azman, Nurul Afiqah (2020) Technological Capability in Industry 4.0: A Literature Review for Small and Medium Manufactures Challenges. Journal of Critical Reviews, 7 (8). pp. 1429-1438. ISSN 2394-5125

Akashaha, Nursyamfarhani and Solehina, Siti Najihah and Lia Janinga, Marsheilla and Manap, Nur Aina Yusra and Ab Rahman, Nor Shahida and Abu Bakar, Muhammad Abdul Latiff and Mohamed Rehan, Aisyah and Kamarudin, Kamarul Rahim (2020) DNA barcoding of holothuria (mertensiothuria) leucospilota from Pulau Tinggi, Johor. Journal of Engineering and Health Sciences, 4. pp. 95-110.

Ali, Maimunah and Ibrahim, Patmawati (2018) Inflation and companies’ performance: a crosssectional analysis. Advanced Science Letters, 24 (6). pp. 4750-4755. ISSN 1936-6612

Alias, Aisyah Humaira and Md. Tahir, Paridah and Abdan, Khalina and Salit, Mohd Sapuan and Wahab, Mohd Saidin and Saiman, Mohd Pahmi (2018) Evaluation of kenaf yarn properties as affected by different linear densities for woven fabric laminated composite production. Sains Malaysiana, 47 (8). pp. 1853-1860. ISSN 0126-6039

Chan, Shiau Wei and Lim, Hui Ting (2017) Manufacturing employees’ big five personality dimensions and their relationship to job satisfaction. Journal of Technology Management and Business, 4 (27). pp. 1-11. ISSN 2289-7224

FARN, Fadhlia and MT, Paridah and UMK, Anwar and AH, Juliana and A, Zaidon (2017) Enhancing mechanical properties and dimensional stability of phenolic resin-treated plybamboo. Journal of Tropical Forest Science, 29 (1). pp. 19-29. ISSN 0128-1283

Hashemi, Fariborz and Md Tahir, Paridah and Madsen, Bo and Jawaid, M and Majid, DL and Brancheriau, Loı¨c and AH, Juliana (2015) Volumetric composition and shear strength evaluation of pultruded hybrid kenaf/glass fiber composites. Journal of Composite Materials, 50 (17). pp. 2291-2303. ISSN 0021-9983

Hasmuni, Noreriyanti and Ibrahim, Mustaffa and Raus, Azli Amin and Wahab, Mohd Saidin and Kamarudin, Khairu (2018) Porosity effects of AlSi10mg parts produced by selective laser melting. Journal of Mechanical Engineering, 5 (4). pp. 246-255. ISSN 2550-164X

Hj. Pakir, Mohamed Ismail K. P. and Wan Yusoff, Wan Fauziah and Raja Mohd Rasi, Raja Zuraidah (2018) Bumiputra SMES food manufactures halal certification challenges: a review. Advanced Science Letters, 24 (5). pp. 3234-3239. ISSN 1936-6612

Jamalludin, Mohd Riduan and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Hubadillah, Siti Khadijah and Yunos, Muhamad Zaini and Ismail, Ahmad Fauzi (2018) Morphology and property study of green ceramic hollow fiber membrane derived from waste sugarcane bagasse ash (WSBA). Ceramics International, 44 (15). pp. 18450-18461. ISSN 0272-8842

Kamarudin, Kamarul Rahim and Mohamed Rehan, Maryam and Mohd Noor, Hanina and Ramly, Nur Zazarina and Mohamed Rehan, ‘Aisyah (2016) 16S rRNA Barcoding technique for species identification of processed sea cucumbers from selected Malaysian markets. Journal Of Science And Mathematics Letters, 4. pp. 10-23. ISSN 2462-2052

Kamarudin, Kamarul Rahim and Usup, Gires and Hashim, Ridzwan and Mohamed Rehan, Maryam (2015) Sea cucumber (echinodermata: holothuroidea) species richness at selected localities in Malaysia. Pertanika Tropical Agricultural Science, 38 (1). pp. 7-32. ISSN 1511-3701

Kee, Huong Lai and Zainuddin, Zarita and Ong, Pauline (2016) A harmony search-based learning algorithm for epileptic seizure prediction. International Journal of Management and Applied Science, 2 (12). pp. 164-169. ISSN 2394-7926

Khirotdin, Rd Khairilhijra' and Zakaria, Danieal A. and Mohadhir, Munirah (2017) Printing and curing silver conductive ink tracks from modified on-shelf inkjet printer on fabric. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 16 (6). pp. 1-7. ISSN 2227-2771

Lee, Te Chuan and Mokan, Kogila Vani and Bhoyar, M. R. (2018) The intention of green products purchasing among Malaysian consumers: a case study of Batu Pahat, Johor. Indian Journal of Public Health Research & Development, 9 (10). pp. 996-1001. ISSN 0976-5506

Mahmood, Salwa and Syed Abdul Aziz, Syed Abd.Hafiz and Zulkifli, Mohd Zakwan and Marsi, Noraini (2020) Rula and Reba analysis on work postures: a case study at poultry feed manufacturing industry. Journal of Computational and Theoretical Nanoscience, 17 (2-3). pp. 755-764. ISSN 1546-1955

Mazlan, Siti Nur Humaira and Abdul Kadir, Aini Zuhra and Yusof, Yusri and Wahab, Md Saidin (2020) Overhang analysis fabricated using fused deposition modelling technique. Journal of Advanced Industrial Technology and Application, 1 (1). pp. 38-47. ISSN 2716-7097

Mohd Farid, Nur Sarah Hidayah and Ahmad, Nurazwa and Abu Seman, Noor Aslinda (2021) Hubungan di antara amalan pembuatan mampan dan prestasi mampan dalam sektor pembuatan. International Journal of Innovation and Industrial Revolution (ijirev). pp. 10-30.

Mohd Zainuri, Mohamad Izwan Saifudin and Wahab, Md Saidin and Hj Ibrahim, Mustaffa and Marwah @ Omar, Omar Mohd Faizan and Sa'ude, Nasuha (2020) Emerging natural fiber-reinforced cement materials and technology for 3D concrete printing: a review. International Journal of Integrated Engineering, 12 (3). pp. 161-177. ISSN 2229-838X

Muda, Rizamarhaiza and Azmi, Mohd Azham and Mahzan, Shahruddin and Elwalwal, Hatem Mostafa and Ahmad, Sufizar and Taib, H. (2018) Effect of SiO2 solid loading and sintering temperatures on the physical properties of SiO2-NiO foam. Key Engineering Materials, 791. pp. 37-44. ISSN 1662-9795

Muhammad, Shafiq and Tasmin, Rosmaini and Mehwish, Rashid (2017) Mediating role of innovation strategy between porter's red ocean strategy and innovative performance. Journal of Computational and Theoretical Nanoscience, 23 (9). pp. 9243-9246. ISSN 1546-1955

Othman, M.H. and Osman, S.A. and Amin, S.Y.M. and Rosli, M.S. (2018) Modelling of integral hinges via CadMould 3d-F injection moulding simulation. JOURNAL OF ADVANCED RESEARCH IN DYNAMICAL AND CONTROL SYSTEMS, 10 (13). pp. 112-117. ISSN 1943-023X

Othman, Nurhazwani and Mohammad, Jawaid and Md. Tahir, Paridah and Abdul Halip, Juliana and S. Abdul, Hamid (2016) Hybrid particleboard made from bamboo (Dendrocalamus asper) veneer waste and rubberwood (Hevea brasilienses). Peer-reviewed article, 11 (1). pp. 306-323. ISSN 1930-2126

Saliman, MAR and A, Zaidon and Bakar, ES and Lee, SH and M Tahir, P and Leemon, NF and MF, Kaipin and AH, Juliana (2017) Response surface methodology model of hydrothermal treatment parameters on decay resistance of oil palm wood. Journal of Tropical Forest Science, 29 (3). pp. 315-324. ISSN 0128-1283

Saliman, Muhammad Anuar Ridzuan and Ashaari, Zaidon and Bakar, Edi Suhaimi and Lee, Seng Hua and Md Tahir, Paridah and Abdul Halip, Juliana and Leemon, Nabil Fikri (2017) Hydrothermal treatment of oil palm wood: effect of treatment variables on dimensional stability using response surface methodology. JOURNAL OF OIL PALM RESEARCH, 29 (1). pp. 130-135. ISSN 1511-2780

Seng, Hua Lee and Ashaari, Zaidon and Aik, Fei Ang and Abdul Halip, Juliana (2017) Dimensional stability of heat oil-cured particleboard made with oil palm trunk and rubberwood. European Journal of Wood and Wood Products, 75. pp. 285-288. ISSN 0018-3768

Seng Chia, Kim and Jam, Mohamad Nur Hakim and Gan, Zeanne and Ismail, Nurlaila (2020) Pre-dispersive near-infrared light sensing in non-destructively classifying the brix of intact pineapples. Journal of Food Science and Technology, 57. pp. 4533-4540. ISSN 0022-1155

Shahbaz, Muhammad Saeed and RM Rasi, Raja Zuraidah and Zulfakar, Mohd Hafiz and Ahmad, Md Fauzi and Mujtaba Asad, Muhammad (2018) Theoretical framework development for supply chain risk management for Malaysian manufacturing. International Journal of Supply Chain Management (IJSCM), 7 (6). pp. 325-338. ISSN 2051-3771

Sukri, N.A. and Saiman, M.P. and Ishak, K. and Wahab, Md Saidin and Rashad, N.F.A. (2020) Characteristic of pineapple leaf fibre using different methods at minimum level with the assist of mechanical breaker. Journal of Advanced Manufacturing Technology (JAMT), 14 (2). pp. 77-88. ISSN 1985-3157

Tuan Ismail, Tuan Noor Hasanah and Md Madzhar, Mohamad Muazzam Akmar and Yuriz, Yasmin (2020) Evaluation of soaked and unsoaked CBR values of reinforced-soil with coconut husk fibre (CHF). International Journal of Engineering, Applied and Management Sciences Paradigms, 54 (13). pp. 22-32. ISSN 2320-6608

Wagner, Jürgen P. and Grigg, Nigel and Mann, Robin and Mohammad, Musli (2017) High task interdependence: job rotation and other approaches for overcoming ingroup favoritism. Journal of Manufacturing Technology Management, 28 (4). pp. 485-505. ISSN 1741-038X

Zaidon, Fazhrul Haqimee and Kassim, Karimah and Mohd Zaki, Hamizah and Embong, Zaidi and Anouar, El Hassane (2021) Adsorption and corrosion inhibition accomplishment for thiosemicarbazone derivatives for mild steel in 1.0 M HCl medium: Electrochemical, XPS and DFT studies. Journal of Molecular Liquids, 329. pp. 1-15.

al Naqbi, Rashid Ahmed Khamis and Md Yusoff, Rosman and Ismail, Fadillah (2018) Supply chain integration and sustainable supply chain performance: a case of manufacturing firms from UAE. Advanced Science Letters, 7 (4.7). pp. 424-429. ISSN 2227-524X

Book Section

Md Shahudin, Shamil Najmy and Zainal, Abdul Rahem and Othman, Siti Amira (2020) Life buoy. In: Personal protective equipment. Penerbit UTHM, UTHM, pp. 102-106. ISBN 978-967-2916-98-7

Nawawi, Muhammad Amirul and Kamisan, Muhamad Nurul Fitri and Adam, Nur Farah Aqilah and Tuan Ibrahim, Tuan Mohd Hafeez and Ismail, Fadillah (2020) Car wash water recycling system. In: Innovative Product Design for Industrial Application. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-12-5

Tuan Ibrahim, Tuan Mohd Hafeez and Ismail, Suhairi and Basharie, Siti Mariam and Abdul Rahman, Muhammad Qusyairi and Ahmad, Muhammad Shukri and Soo, Jun Chun and Osman, Muhammad Nur Fikri and Baskaran, Simresan (2020) Camera stabilizer. In: Innovative Product Design for Industrial Application. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-12-5

Conference or Workshop Item

Kamil, Muhammad and Ho, Fu Haw (2022) Development of a product remanufacturing assessment tool based on part attributes and features. In: Research Progress in Mechanical and Manufacturing Engineering.

Thesis

Ab Latif, Mohd Noor Hisyam (2013) Production management and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ann-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Mohd Salleh (2011) Bottleneck-based heuristic for three-machine flow shop scheduling. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Nurul Azma (2004) Job shop scheduling problem (JSSP). Masters thesis, University of East Anglia.

Abdullah, Sharifah Sakinah (2017) Electrodeposition of nickel/copper multi-nanolayer by dual bath technique at ambient temperature. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Bachik (2004) Subjective and objective evaluation of fabric handle characteristics. Masters thesis, University of Leeds.

Abu Bakar, Noor Hamiza (2003) Penghasilan modul pengajaran kendiri mata pelajaran Seni Reka Tekstil bagi tajuk Kaedah Mencetak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Adnan, Ronny Nasrun (2010) Penilaian pengurusan fasiliti di sekolah dasar negeri di Jakarta. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ahmad, Rosli (2006) Optimisation of the squeeze forming process. Doctoral thesis, University of Wales, Swansea.

Chen, Wong Keong (2017) Machining feature-based system for supporting step-compliant milling process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chong, Siaw Hua (2009) Determining accuracy of bill of materials for a surface mount technology machine using solidworks software. Masters thesis, Universiti Putra Malaysia.

Daniyal, Hamdan (2004) Study on interoperability problems among CAD/CAM systems in automotive industry. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Elfallah, Saleh S Saleh (2012) Analysis of mechanical properties and microstructure of multiple die cavity products produced in vertical and horizontal arrangement by gravity die casting. Masters thesis, Universiti Tun Hussein Malaysia.

Hamjah, Mohd Khairulamzari (2014) Optimization of new semi-automatic TIG welding process for surface quality through taguchi method. Masters thesis, Universiti Tun Hussein Malaysia.

Hehsan, Haffidzudin (2013) The effect of vortex well thickness on microstructure and mechanical properties of aluminium LM6. Masters thesis, Universiti Tun Hussein Malaysia.

Ibrahim, Mohd Tarmizi (2011) Line and wall follower hexapod robot. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail, Nor Lailihuda (2003) Pembangunan model kualiti bagi modul pengajaran kendiri (MPK) menggunakan kaedah quality function deployment (QFD). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kamarudin, Khairu (2019) Evaluation on performance of square finned conformal cooling channel (sfccc) fabricated by selective laser melting (slm) on plastic moulded part. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kasmin, Ashari (2014) Design for sustainability (D4S) in product development using solidworks software: a case study of redesign a sugar cane extractor machine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Katimon, Mohd Nizam (2008) Optimisation deep drawing process parameters using FE simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Siti Nor Azila (2013) Mechanical strength of as-compacted aluminium alloy waste chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Majid, Mariam (2014) Study of artificial neural network scheme application in manufacturing industry for monitoring-diagnosis bivariate process variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansour, Saleh Faraj (2011) Corporation robots. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marian, Mohd Fairuz (2014) Synergistic artificial neural network scheme for monitoring and diagnosis of multivariate process variation in mean shifts. Masters thesis, Universiti Tun Hussein Malaysia.

Marwah, Omar Mohd Faizan (2006) Performance evaluation of FDM water works system for ABS part. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Masood, Ibrahim (2012) A scheme for balanced monitoring and accurate diagnosis of bivariate process mean shifts. Doctoral thesis, Universiti Teknologi Malaysia.

Masrol, Shaiful Rizal (2013) Characteristics of paper made from durian rinds. Masters thesis, Universiti Tun Hussein Malaysia.

Mat, Mohd. Zulhasnan (2003) Aplikasi sistem maklumat stok dan inventori makmal JPTV. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Hatta, Mohd Zainuri (2014) Investigation of organic composition of potential plants as alternative fiber in paper making industry. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Mokhtar, Mohd Firdaus (2014) Mango (Harum Manis) quality grading system. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nadzri, Mohd Azaharuddin (2003) Pembelajaran carta kawalan X - BAR dan R melalui e-modul. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Turan, Faiz (2013) A three-stage methodology for design evaluation in product development. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Zazuli (2008) Evaluation of glass welding by ultrashort pulse laser. Masters thesis, Okayama University.

Mustapa, Muhammad Wazir (2017) Fabrication of built-in retractable hose mechanism for domestic usage. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muzarpar, Muhammad Syafiq (2019) Development and fabricatin of production mechanism for small and medium animal feed production plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Chuan Huat (2003) Sistem rekabentuk corak dan acuan pinggan. Masters thesis, Universiti Teknologi Malaysia.

Ngatiran, Norida (2003) Penghasilan dan penilaian buku panduan prosedur pematerian komponen elektronik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Omar, Badrul (2008) A fuzzy approach to support DFA evaluation of design concepts. Doctoral thesis, The University of Leads.

Putrasari, Yanuandri (2011) Preparation of NiO catalyst on FeCrAI substrate using various techniques at higher oxidation process. Masters thesis, Universiti Tun Hussein Malaysia.

Rakiman, Umol Syamsyul (2013) Production line: effect of different inspection station allocation under accepts reject inspection policy. Masters thesis, Universiti Tun Hussein Malaysia.

Rusin, Siti Ruzaimah (2005) CIM control design using grafcet. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sabudin, Sulastri (2004) Defect analysis on investment casting: a case study. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Sahidi, Sujanuriah (2013) Friction stir welding of dissimilar metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarpin, Norliana (2015) Developing people capabilities for the promotion of sustainability in facility management practices. Doctoral thesis, Queensland University of Technology.

Sh Ahmad, Sh Salleh (2009) Bottleneck adjacent matching heuristics for scheduling a re-entrant flow shop with dominant machine problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shafie, Fazira (2013) FM Help Desk: user complaint system as an FM approach for facilities management services in Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shamsudin, Muhamad Khairy (2014) Kajian terhadap sifat mekanik bagi jenis corak pengisian dalam proses pembuatan tiga demensi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidek, Kamsidi @ Abd Malek (2013) Production improvement in ACM manufacturing company using lean manufacturing approach. Masters thesis, Universiti Tun Hussein Malaysia.

Subhi, Zaid Ali (2012) The effects of vortex gate design on mechanical strength of thin section casting of LM 25 (Al---7Si-0.3Mg) aluminum casting alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Md Saidin (2003) Defect detection in high pressure die casting product using image processing technology. Masters thesis, University of South Australia.

Yeoh, Kim Hao (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Malaysia.

kamarudin, Khairu (2013) Parameter optimization for photo polymerization of mask projection micro stereolithography. Masters thesis, Universiti Tun Hussein Malaysia.

Other

Mukhtar, Muhammad Faiz Hakimi and Mahmod, M. F. (2021) Simulation analysis of ultrasonic testing in steel-based butt weld joint. Penerbit UTHM, UTHM.

This list was generated on Fri Mar 29 17:19:18 2024 +08.