Items where Subject is "T Technology > TS Manufactures > TS155-194 Production management. Operations management"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Jump to: A | B | C | D | G | H | I | J | K | L | M | N | O | R | S | T | U | W | Y | Z
Number of items at this level: 161.

A

Ab Latif, Mohd Noor Hisyam (2013) Production management and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Kadir, Muhammad Hijrah and Raja Mohd Rasi, Raja Zuraidah and Omar, Siti Sarah and Ahmad, Md Fauzi and Mohd Nawi, Nazri and Abdul Manap, Zariq Imran and Saguna, Baharundin (2018) Researcher’s perspectives on halal supply chain management: definition and methodology. Advanced Science Letters, 24 (5). pp. 3292-3295. ISSN 1936-6612

Abd Wahab, Muhammad Badrul Amin and Mustar, Muhamad Radzi and Mohamad Rus, Mohamad Arif and Mahmood, Salwa and Raja Mamat, Tengku Nur Azila (2020) Quality control improvement at Jana DCS Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 118-125. ISBN 978-967-2389-59-0

Abdul Haq, Raezul Haq (2015) Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nano-composites for fused deposition modelling (FDM) process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ANN-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ann-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Mohd Salleh (2011) Bottleneck-based heuristic for three-machine flow shop scheduling. Masters thesis, Universiti Tun Hussein Malaysia.

Abdulla Lari, Darwish Ahmed Darwish (2021) Influence of organizational culture in the relationship between information system and operational performance on manufacturing sector in UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Haslina and Ramli, Rizauddin and Abd Wahab, Dzuraidah and Abu Qudeiri, Jaber (2016) Tool path generation of contour parallel based on ant colony optimisation. Jurnal Teknologi (Sciences & Engineering), 78 (6-9). pp. 31-36. ISSN 0127-9696

Abdullah, Haslina and Tuan Zahari, Tuan Muhammad Lutfi and Zakaria, Mohamad Shukri (2018) Simulation of ant colony optimization on hole making performance. In: Innovative research and industrial dialogue 2018, 18 July 2018, UTEM.

Abdullah, Mohd Fahmy and Abdul Talib, Basri (2018) Data Envelopment Analysis (Dea) approach In efficiency transport manufacturing industry in Malaysia. International Journal of Engineering & Technology, 7 (3.20). pp. 339-343. ISSN 2227-524X

Abdullah, Mohd Fahmy and Ismail, Rahmah and Sulaiman, Noorasiah and Abdul Talib, Basri (2017) Technical efficiency in transport manufacturing firms: evidence from Malaysia. Asian Academy of Management Journal, 22 (1). pp. 57-77. ISSN 2180-4184

Abdullah, Mohd Fahmy and Lai, Wei Sieng and Muhammad Isa, Hamdan (2019) Technical efficiency evaluation: study on Malaysian electrical and electronics firms. Asian Academy of Management Journal, 24 (2). pp. 1-19.

Abdullah, Mohd Fahmy and Lai, Wei Sieng and Muhammad Isa, Hamdan (2019) Technical efficiency evaluation: study on Malaysian electrical and electronics firms. Asian Academy of Management Journal, 24 (2). pp. 1-19. ISSN 2180-4184

Abdullah, Nurul Azma (2004) Job shop scheduling problem (JSSP). Masters thesis, University of East Anglia.

Abu Seman, Noor Aslinda and Govindan, Kannan and Mardani, Abbas and Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Hooker, Robert E. and Ozkul, Seckin (2019) The mediating effect of green innovation on the relationship between green supply chain management and environmental performance. Journal of Cleaner Production, 229. pp. 115-127. ISSN 0959-6526

Adeyemi, Adegbenga and Martin, David and Kasim, Rozilah (2016) Improvement of existing public office buildings in Nigeria from users’ perspective using lean thinking – a pictorial view. International Journal of Architecture and Urban Development, 6 (4). pp. 51-64. ISSN 2345233

Ahmad, A.N. Aizat and Hasan, Sulaiman and Husin, Nofafifah (2015) Cyber value stream system reduced waste and non-value added of manufacturing operation. International Journal of Advancements in Mechanical and Aeronautical Engineering, 2 (2). pp. 205-208. ISSN 2372-4153

Ahmad, Ahmad Nur Aizat and Hasan, Sulaiman and H., Norafifah (2014) Development of computerize value stream system. Advanced Materials Research, 915. pp. 1405-1411. ISSN 1662-8985

Ahmad, Md Fauzi and Khor, Chun Hoong and Abdul Hamid, Norhadilah and Sarpin, Norliana and Zainal, Rozlin and Ahmad, Ahmad Nur Aizat and Hassan, Mohd Fahrul and Mohd Nawi, Mohd Nasrun (2018) The impact of product design and process design towards new product performance in manufacturing industry: a survey result in Malaysia. International Journal of Supply Chain Management, 7 (2). pp. 102-106. ISSN 2050-7399

Ahmad Nordin, Norain and Sazeli, Zul Afiq and Juma’at, Nuramirah and Hashim, Shazana and Mohamad, Nurhana and Azharuddin, Ahmad Alif Syah and Zainin, Fitri Hakim and Mohamad Zurzain, Muhammad Zariff Mirza (2020) Portable organic water filter with the use of coconut shell and seashells. In: Application in Science and Technology. Penerbit UTHM, pp. 37-47. ISBN 978-967-2389-62-0

Ahmad Termida, Nursitihazlin and Susilo, Yusak O. and Franklin, Joel P. (2016) Examining the effects of out-of-home and in-home constraints on leisure activity participation in different seasons of the year. Transportation, 43. pp. 997-1021. ISSN 0049-4488

Alhosani, Adel and Mohamed Zabri, Shafie (2018) A uniform supply chain management framework for oil and gas sector: a preliminary review. International Journal of Advanced and Applied Sciences, 5 (2). pp. 19-24. ISSN 2313-626X

Ang, Shin Yin and Mohd Razali, Siti Noor Asyikin and Kek, Sie Long (2019) Optimized preference of security staff scheduling using integer linear programming approach. International Journal of Advanced Computer Technology (COMPUSOFT), 8 (4). pp. 1-9. ISSN 2320-0790

Azahari, Mohamad Azhar (2014) A study on extrusion of multiple material bonding for fused depostion modeling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azis, N. Hafizah and Rahim, M. Zulafif and Sa’ude, Nasuha and Rafai, N. and Yusof, M.S. and Tobi, A.L.M. and Sharif, Z.M. and Ibrahim, M. Rasidi and Ismail, A.E. (2017) The influence of injection molding parameter on properties of thermally conductive plastic. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012018). pp. 1-9. ISSN 1757-899X

B

Bahar, Norsuliha and Ramlan, Rohaizan and Mokhtar, Rashidah and Tasmin, Rosmaini and Dasril, Yosza (2020) Financial performance of public listed private healthcare in Malaysia using data envelopment analysis (DEA). In: Service and operation management. Penerbit UTHM, pp. 127-133. ISBN 978-967-2916-51-2

Bala, Abduladim Salem and Wahab, Saidin and Ahmad, Mazatusziha (2016) Elements and materials improve the FDM products: a review. Advanced Engineering Forum, 16 (NIL). pp. 33-51. ISSN 2234-991X

C

Cheam, Kai Wen and Mohd Nor, Norasmiha and Mohd Noh, Amieruddin Akhmarl and Awang Rosdi, Dayang Nur Qamarina and Roslan, Nor Azwany and Saibi, Noraikah and Saad, Shoib Ali Noor Aldeen (2020) The master production schedule in MRP for microelectronic manufacturer. In: Material Requirements Planning. Penerbit UTHM, pp. 96-114. ISBN 978-967-2916-53-6

Cheam, Kai Wen and Mohd Nor, Norasmiha and Shahkirin, Ahmad Haiqal and Jaafar, Muhamad Zamakhsyari and Mhd Zamaludin, Nabilah Afrina and Misnan, Nur Aini Nasihah (2020) Schedule based material requirements planning: a case study of LCD TV manufacturer. In: Material Requirements Planning. Penerbit UTHM, pp. 1-23. ISBN 978-967-2916-53-6

Cheam, Kai Wen and Mohd Nor, Norasmiha and Taib, Muhammad Aidil and Rahman, Muhammad Saiful Syazuwan and Kor, Wan Xuan and Azman, Ameera Ainur (2020) Material requirements planning system: a case study of stationery manufacturer. In: Material Requirements Planning. Penerbit UTHM, pp. 149-179. ISBN 978-967-2916-53-6

Chen, Wong Keong (2017) Machining feature-based system for supporting step-compliant milling process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

D

Daniel, M. Afiq and Raja Ahmad, Raja Adibah and Hussin, R. and Hamidon, M. Adam Bukhori and Harun, Z. and Yunos, M. Z. and Ainuddin, A. R. (2024) The oil sorption behaviour investigation of Kapok (Ceiba pentandra (L.)) fiber. In: https://doi.org/10.1063/5.0183198.

Daniyal, Hamdan (2004) Study on interoperability problems among CAD/CAM systems in automotive industry. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Darmawan, Mohd Faaizie and Jamahir, NurIzzati and Saedudin, Rd. Rohmat and Kasim, Shahreen (2018) Comparison between ANN and multiple linear regression models for prediction of warranty cost. International Journal of Integrated Engineering, 10 (6). pp. 193-196. ISSN 2229-838X

Dasril, Yosza and ., Muhammad Sam’an and Bujang, Nazarudin and Ramlan, Rohaizan (2020) Application of fuzzy AHP method based on eigenvalues for decision making in transportation problems. In: Service and operation management. Penerbit UTHM, pp. 66-80. ISBN 978-967-2916-51-2

Djauhari, Maman Abdurachman and Mohd Asrah, Norhaidah and Irianto, Irianto and Ibrahim, Noor Akma (2019) Monitoring variability in complex manufacturing process: data analysis viewpoint with application. International Journal of Supply Chain Management, 8 (2). pp. 1170-1177. ISSN 2051-3771

G

Gelau, Daryl and Ting, Joseph Zhi Ho and Chen, Chit Wee and Mohd Rafli, Izzat Emeer and Yahaya, Mohamad Amirul Ashraf and Ramlan, Ikhsan Mustain and Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Ngadiman, Nor Hasrul Akhmal (2020) Improvement design of existing threshing machine at Kilang Sawit Risda, Ulu Keratong. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 91-98. ISBN 978-967-2389-59-0

H

Hasan, S. and Ahmad, A. N. A. and Feriyanto, D. (2015) Computerized value stream system (CVSS) to reduce waste in lean manufacturing operation. International Journal of Innovation in Mechanical Engineering & Advanced Materials, 1 (1). pp. 13-18. ISSN 2477-541X

Hasan, Sulaiman and Ahmad, A.N. Aizat and Feriyanto, Dafit (2015) Computerized value stream system (CVSS) untuk mengurangi limbah pada operasi lean manufaktur. Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri), 9 (1). pp. 61-71. ISSN 2085-5869

Hassan, S and Yusof, M S and Ding, S and Maksud, M I and Nodin, M N and Mamat, K A and Sazali, M S and Rahim, M Z (2017) Investigation of carbon nanotube ink with PDMS printing plate on fine solid lines printed by micro-flexographic printing method. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012017). pp. 1-7. ISSN 1757-899X

Hassan, Suhaimi and Yusof, Mohd Sallehuddin and Maksud, Mohd Idris and Nodin, Muhamad Nor (2016) A study of micro to nano structure fine solid line printing for graphene ink by micro-flexographic printing method. International Journal of Mechanical Engineering, 1. pp. 109-113. ISSN 2367-8968

Haw, Ho Fu and Abdul-Rashid, Salwa Hanim and Raja Ghazilla, Raja Ariffin (2018) Analytic hierarchy process-based analysis to determine the barriers to implementing a material efficiency strategy: electrical and electronics’ companies in the Malaysian context. Sustainability, 8 (10). pp. 1-16. ISSN 2071-1050

Hehsan, Haffidzudin (2013) The effect of vortex well thickness on microstructure and mechanical properties of aluminium LM6. Masters thesis, Universiti Tun Hussein Malaysia.

Hehsan, Haffidzudin and Nordin, Muhammad Alif Haziq (2020) Design improvement of toner cartridge using design for assembly method. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM. (Submitted)

Hua, Lee Seng and Ashaaria, Zaidon and Fei, Ang Aik and Abdul Halip, Juliana and Chen, Lum Wei and Dahali, Rasdianah and Halis, Rasmina (2018) Effects of two-step post heat-treatment in palm oil on the properties of oil palm trunk particleboard. Industrial crops & products, 116. pp. 249-258. ISSN 0926-6690

I

Ibrahim, Mohd Tarmizi (2011) Line and wall follower hexapod robot. Masters thesis, Universiti Tun Hussein Malaysia.

Ibus, Salbeha and Ismail, Fadillah (2018) Conceptual framework: The mediating effect of self-efficacy in the relationships of self-leadership, knowledge sharing, and innovative work behaviour. International Journal of Academic Research in Business and Social Sciences, 8 (11). pp. 1859-1876. ISSN 2222-6990

Ismail, Nor Lailihuda (2003) Pembangunan model kualiti bagi modul pengajaran kendiri (MPK) menggunakan kaedah quality function deployment (QFD). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

J

Jaafar, Ishaq and Tasmin, Rosmaini and Ramlan, Rohaizan and Abdul Hamid, Nor Aziati and Ngadiman, Yunos (2020) A conceptual framework integration of UTAUT and HBM on evaluating the adoption of electronic payment system in Malaysia. In: Service and operation management. Penerbit UTHM, pp. 10-19. ISBN 978-967-2916-51-2

Janis, Ilyana and Alias, Maizam and Zulkipli, Muhammad and Muhammad-Sukki, Firdaus (2020) Using illustrations to make decisions on the most appropriate qualitative research methodology: the industry 4.0 scenario. International Journal of Qualitative Methods, 19. pp. 1-16. ISSN 1609-4069

Junaidi, Adiliya Hellanie and John, Fredilla Ivy Tijah and Osman, Muhammad Yusra and Saadan, Muhammad Zainul Ariffin and Mahmood, Salwa and Saleh, Aslinda (2020) Work design improvement of food steamer at Pau Mira Frozen Food Industry. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 35-46. ISBN 978-967-2389-59-0

K

Kasim, Rozilah and Umar, Muhammad Akilu and Martin, David (2018) Social factor as an indicator for service excellence in facilities management services. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 294-303. ISSN 1943-023X

Kasmin, A. and Masood, I. and Abdul Rahman, N. and Abdul Kadir, A. H. and Abdol Rahman, M. N. (2021) Control chart pattern recognition using small window size for identifying bivariate process mean shifts. The International Journal of Integrated Engineering, 13 (2). pp. 208-213. ISSN 2229-838X

Katimon, Mohd Nizam (2008) Optimisation deep drawing process parameters using FE simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Zohaib (2021) Barriers factor of ISO 9001:2015 implementation in the manufacturing industry of Pakistan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khirotdin, Rd Khairilhijra' and Zakaria, Danieal A. and Mohadhir, Munirah (2017) Printing and curing silver conductive ink tracks from modified on-shelf inkjet printer on fabric. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 16 (6). pp. 1-7. ISSN 2227-2771

Khirotdin, Rd. Khairilhijra and Hassan, Nurhafizzah and Yusof, Umiera Asyikin and Mahadzir, Muhammad Adzeem (2017) Investigation of curing silver conductive inks on fabrics using dlp projector and hot plate. Material Science Forum, 887 (NIL). pp. 55-64. ISSN 1660-9336

Khirotdin, Rd. Khairilhijra and Mohamad Zainuri, Mohamad Izwan Saifudin and Ishak, Afiqah Izzati and Hassan, Nurhafizzah and Kamarudin, Khairu and Ibrahim, Mohd. Rasidi and Abdul Haq, Reazul Haq and Ibrahim, Mustafa and Sau’de, Nasuha and Mohd. Faizan Marwah, Omar (2017) Printing and curing of conductive ink track on fabric using syringe deposition system with DLP projector and hot plate. MATEC Web of Conferences, 135 (1). pp. 1-10. ISSN 1816-093X

kamarudin, Khairu (2013) Parameter optimization for photo polymerization of mask projection micro stereolithography. Masters thesis, Universiti Tun Hussein Malaysia.

L

Lee, Jocelyn Ke Yin and Gholami, Hamed and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal and Zakuan, Norhayati and Mahmood, Salwa and Omain, Siti Zaleha (2021) Sustainability-oriented application of value stream mapping: a review and classification. IEEE Access, 9. pp. 68414-68434.

Liwan, Siti Radziah (2015) The framework of improving on-site materials tracking for inventory management process in construction projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M. A. Ataalah, Abdurezzag (2019) Development of new lean manufacturing approach through people development and process improvement as a mediator in the libyan companies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mahmood, Salwa and Hassan, Mohd Fahrul and Hemdi, Abdul Rahman and Mat Saman, Muhamad Zameri (2018) Sustainability in the product design: A review of recent development based on LCA. International Journal of Engineering and Technology, 7 (3.7). pp. 54-57. ISSN 2227-524X

Mahmood, Salwa and Mat Saman, Muhamad Zameri and Hemdi, Abdul Rahman and Zakuan, Norhayati (2017) Potential impacts for monitoring sustainability: case study of hollow fiber membrane. Journal of Engineering and Applied Sciences, 12 (10). pp. 2682-2686. ISSN 1816-949X

Majid, Mariam (2014) Study of artificial neural network scheme application in manufacturing industry for monitoring-diagnosis bivariate process variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Maksud, M. I. and Nodin, M. N. and Yusof, M. S. and Hassan, S. (2016) Utilizing rapid prototyping 3D printer for fabricating flexographic PDMS printing plate. ARPN Journal of Engineering and Applied Sciences, 11 (2). pp. 7728-7734. ISSN 1819-6608

Mansour, Saleh Faraj (2011) Corporation robots. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marian, Mohd Fairuz (2014) Synergistic artificial neural network scheme for monitoring and diagnosis of multivariate process variation in mean shifts. Masters thesis, Universiti Tun Hussein Malaysia.

Marwah, Omar Mohd Faizan (2016) Analysis of various rapid prototyping techniques for investment casting. Doctoral thesis, Universiti Teknologi Malaysia.

Marwah, Omar Mohd Faizan (2016) Direct rapid prototyping evaluation on multijet and fused deposition modeling patterns for investment casting. Materials Design and Applications, 230 (5). ISSN 949–958

Marwah, Omar Mohd Faizan (2006) Performance evaluation of FDM water works system for ABS part. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Masood, Ibrahim (2004) SPC charting procedure for monitoring of small and large shifts in process mean. Masters thesis, Universiti Teknologi Malaysia.

Masood, Ibrahim (2012) A scheme for balanced monitoring and accurate diagnosis of bivariate process mean shifts. Doctoral thesis, Universiti Teknologi Malaysia.

Masood, Ibrahim and Ali, Rasheed Majeed and Mohd Solihin, Nurul Adlihisam and Elewe, Adel Muhsin (2016) Diagnosis of bivariate process variation using an integrated mspc-ann scheme. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7806-7812. ISSN 1819-6608

Masood, Ibrahim and Hassan, Adnan (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications, 41 (16). pp. 7579-7595. ISSN 0957-4174

Masrom, Nor Ratna and Tamam Daut, Badru At and Rasi, Raja Zuraidah and Lo, Wei Keong (2022) Innovation as mediating factor between total quality management and competitive advantage among manufacturers. International Journal for Quality Research, 16 (1). pp. 243-260. ISSN 1800-6450

Mat, Mohd. Zulhasnan (2003) Aplikasi sistem maklumat stok dan inventori makmal JPTV. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mat Jusoh, Zairra (2018) A model of an effective materials management for better project performance in construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) A study on shelf life prolonging process of chili soy sauce in Malaysian SMEs’ (Small Medium Enterprise). IOP Conference Series: Materials Science and Engineering (MSE), 203 (012026). pp. 1-6. ISSN 1757-899X

Mathelinea, Devy (2021) Cost optimisation of Malaysia medicine inventory through demand forecasting and nonlinear inventory model. Masters thesis, Universiti Tun Hussein Malaysia.

Md Ariffin, Khadijah and Kasim, Rozilah and Ishak, Mohd Hafizal and Harun, Mohd Rosli and Mohd Noh, Zainuddin (2018) Facilities performance audit on public buildings. Journal of Advanced Research in Dynamical and Control Systems, 10 (6). pp. 140-143. ISSN 1943-023X

Md Noor, Muhammad Amirulhadi and Ahmad Khairuddin, Muhammad Adib and Hassan Fikri, Mohd Hafiz and Abd Rahim, Mohd Faidhul Erfan and Roslizan, Mohammad Fithri and Khairudin, Mohd Sacirbey and Mahmood, Salwa and Saleh, Aslinda and Talib, Norfazillah (2020) The improvement of standard operating procedures (SOP) and the process of grading the fresh palm fruit (BTS) at Kilang Kelapa Sawit Risda Ulu Keratong. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 72-90. ISBN 978-967-2389-59-0

Mohamad, Elmy Johana and Ahmad, Muhammad Shukri and Marwah, Omar Mohd Faizan and Masood, Ibrahim (2016) An experimental analysis of strain and stress for abs pattern developed by portable fdm machine used in direct investment casting. ARPN Journal of Engineering and Applied Sciences, 11 (10). pp. 6496-6501. ISSN 1819-6608

Mohamed Elbishti, Entsar Kouni Alhaj (2015) The degree of JIT in mineral oil and asphalt industries in Libya. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariffin, Ahmad Azrizal (2015) Pattern recognition for manufacturing process variation using integrated statistical process control – artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Aripin, Ashuvila and Abd Rashid, Amir Hamzah and Syarifah, Sharfina Mutia and Chan Chee Ming2, Chan Chee Ming2 and Zainulabidin, Muhd Hafeez and Ishak, Nadiah and Adnan, Sharmiza and Seng Chye, Darren Lee and Mohd Kassim, Angzzas Sari (2020) Oil Palm Empty Fruit Bunch (OPEFB) handsheet production from optimized biodelignification of rhynchophorus ferrugineus microbiome’s enzymes. International Journal of Emerging Trends in Engineering Research, 8 (1.2). pp. 253-263. ISSN 2347-3983

Mohd Haizan, Mohamad Azrul Azhad (2019) Identification of shift variation in bivariate process using pattern recognition technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Mokhtar, Mohd Firdaus (2014) Mango (Harum Manis) quality grading system. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nadzri, Mohd Azaharuddin (2003) Pembelajaran carta kawalan X - BAR dan R melalui e-modul. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Nawi, Nazri and Abdul Hamid, Noorhamreeza and Samsudin, Noor Azah and Harun, Zawati and Ab Aziz, Mohd Firdaus and Ramli, Azizul Azhar (2017) Cause and effect prediction in manufacturing process using an improved neural networks. International Journal on Advanced Science Engineering Information Technology, 7 (6). pp. 2027-2034. ISSN 2088-5334

Mohd Nawi, Nazri and Mohamed Saufi, Noor Haliza and Budiyono, Avon and Abdul Hamid, Noorhamreeza and Rehman Gillani, Syed Muhammad Zubair and Ramli, Azizul Azhar (2018) An improved back propagation leaning algorithm using second order methods with gain parameter. International Journal of Integrated Engineering, 10 (6). pp. 11-18. ISSN 2229-838X

Mohd Nor, Norasmiha and Abdul Ghani, Muhammad Hanif and Umar Rashid, Muhammad Aiman Ifqin and Young, Ke Xin and Heng, Chien Ying and Jamzuri, Amelia Yuzni and Cheam, Kai Wen (2020) The material requirements planning system for vacuum manufacturer. In: Material Requirements Planning. Penerbit UTHM, pp. 24-57. ISBN 978-967-2916-53-6

Mohd Nor, Norasmiha and Cheam, Kai Wen and Ser, Eric Jun Hong and Cheng, Yung Tat and Lau, Wee Guan and Rokman, Nor Amira and Radin Abd Rahman, Raden Mohamad Salahuddin (2020) Material requirements planning: application in small medium enterprise. In: Material Requirements Planning. Penerbit UTHM, pp. 115-148. ISBN 978-967-2916-53-6

Mohd Nor, Norasmiha and Ng, Ying Hui and Sazali, Aiman Syakirin and Lee, Xin Tian and Halimirizal, Muhammad Saiful Hasif and O, Jin Yee and Cheam, Kai Wen (2020) Furniture inventory control: using material requirement planning. In: Material Requirements Planning. Penerbit UTHM, pp. 58-72. ISBN 978-967-2916-53-6

Mohd Nor, Norasmiha and Rahman, Muhammad Syahmi and Mohd Lazim, Nur Azlin and Mohamad Rasul, Nur Hadirah Razi and Abdullah, Nor Fadilah and Rama Rao, Kavita Sai and Cheam, Kai Wen (2020) Material requirements planning application: a case study of dinning table furniture manufacturer. In: Material Requirements Planning. Penerbit UTHM, pp. 73-95. ISBN 978-967-2916-53-6

Mohd Pauzi, Nur Fazlinda (2015) Flowshop scheduling using artificial bee colony (ABC) algorithm with varying onlooker bees approaches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Razali, Siti Noor Asyikin and Mei, Fen Looi and Arbin, Norazman and Khamis, Azme (2018) Integer linear programming on preference maximized of workforce scheduling. An international journal of advanced computer technology, 7 (11). pp. 2926-2930. ISSN 2320-0790

Mohd Salleh, Rohayu and Jin, Chuan Ng and Saharan, Sabariah (2018) Monitoring process variability and root cause analysis in paper box production. International Journal of Engineering & Technology, 7 (4.3). pp. 492-497. ISSN 2227-524X

Mohd Sofberi, Nurul Atiqah and Zainal, Rozlin and Ahmad, Md Fauzi (2018) Total quality management (TQM): decision making process model at planning phase for housing development in Malaysia. International Journal of Supply Chain Management, 7 (3). pp. 142-146. ISSN 2050-7399

Mohd Sohaimi, Nurul Adlihisam (2015) Intergration of control chart and pattern recognizer for bivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Turan, Faiz (2013) A three-stage methodology for design evaluation in product development. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zubir, Muhammad Zulfadly and Chee, Sern Lai and Zaime, Adib Farhan and Ming, Foong Lee and Ibrahim, Badaruddin and Ismail, Affero (2021) Dimension of green skills: perspectives from the industry experts. Journal of Technical Education and Training, 13 (1). pp. 159-166. ISSN 2229-8932

Mokhtar, Mohd Shukri (2015) Design optimization for the two-stage bivariate pattern recognition scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Rashidah and Jaafar, Nur Huda and Ismail, Zuriati and Abd Rahman, Mazlyda and Azman Ong, Mohd Hanafi and Ramlan, Rohaizan (2020) The use of information and communication technology in teaching and learning operation by academicians at higher education institution. In: Service and operation management. Penerbit UTHM, pp. 31-43. ISBN 978-967-2916-51-2

Muda, Rizamarhaiza and Azmi, Mohd Azham and Mahzan, Shahruddin and Elwalwal, Hatem Mostafa and Ahmad, Sufizar and Taib, H. (2018) Effect of SiO2 solid loading and sintering temperatures on the physical properties of SiO2-NiO foam. Key Engineering Materials, 791. pp. 37-44. ISSN 1662-9795

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Ab Ghani, Sharin and Md Fauadi, Muhammad Hafidz Fazli and Hussin, Mohamed Saiful Firdaus (2020) Two-level factorial design of the pre-processing activities of polyamide 12 powder in selective laser sintering three-dimensional printing process. Jour of Adv Research in Dynamical & Control Systems, 12 (8). pp. 1167-1177. ISSN 1943-023X

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Alkahari, Mohd Rizal and Md Fauadi, Muhammad Hafidz Fazli and Zainal Bakri, Zainal Bakri (2019) Indoor air concentration from selective laser sintering 3d printer using Virgin Polyamide Nylon (PA12) Powder: a pilot study. The International Journal of Integrated Engineering, 11 (5). pp. 140-169. ISSN 2229-838X

Muhammad Ruzairi, Khairulhafiy and Sukadarin, Ezrin Hani Mirta and Widia, Mirta and Alaman, A. Risk assessment for manual handling activities in a dairy industry. In: HUMENS ENGINEERING SYMPOSIUM 2023.

Muzarpar, Muhammad Syafiq (2019) Development and fabricatin of production mechanism for small and medium animal feed production plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

N, Mohamed and M.Z.M, Saman and S, Sharif and H.S., Hamzah (2018) Strategic factors on interpreting remanufacturing quality- Certifying framework to address warranty aftermarket for Malaysian industry. In: 3rd International Conference on Mechanical, Manufacturing and Process Plant Engineering 2017, ICMMPE 2017, 22 - 23 November 2017, Batu Ferringhi, Penang. (Submitted)

N. A., Isa and S. A., Bareduan and A. S., Zainudin and M., Marsudi (2021) Multiple bottlenecks sorting criterion at initial sequence in solving permutation flow shop scheduling problem. Journal of Advanced Manufacturing Technology (JAMT), 15 (1).

Nawawi, Muhammad Amirul and Kamisan, Muhamad Nurul Fitri and Adam, Nur Farah Aqilah and Tuan Ibrahim, Tuan Mohd Hafeez and Ismail, Fadillah (2020) Car wash water recycling system. In: Innovative Product Design for Industrial Application. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-12-5

Norazmi, Mohamad Amirul Faiz and Abdul Razak Ramesh, Mohamad Iqbal Afham and Ahmad Jais, Mohamad Harizat and Ramli, Mohamad Najmi and Md Shah, Mohamad Sahril and Mohd Said, Mohamad Luqman Hakim and Mahmood, Salwa and Saleh, Aslinda (2020) Work flow improvement at Kenny Leather (M) Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 109-117. ISBN 978-967-2389-59-0

O

Omar, Badrul (2008) A fuzzy approach to support DFA evaluation of design concepts. Doctoral thesis, The University of Leads.

Omar, N.I. and Rasi, R.Z.R. and Zainudin, M.H.F. and Azhari, M.A. and Yusuf, Y. and Mustafa, N. and Azlan, U.A. and Razi, M.H.F.A. and Ismail, S. and Mohamad, S. (2018) Experimental study of welded joints on steel plate cold-rolledsheet metal using different electrode tips. Journal of Advanced Manufacturing Technology, 12 (1). pp. 1-9. ISSN 1985-3157

Othman, M.H. and Osman, S.A. and Amin, S.Y.M. and Rosli, M.S. (2018) Modelling of integral hinges via CadMould 3d-F injection moulding simulation. JOURNAL OF ADVANCED RESEARCH IN DYNAMICAL AND CONTROL SYSTEMS, 10 (13). pp. 112-117. ISSN 1943-023X

Othman, Mohammad Haris Haikal and Arbaiy, Nureize and Che Lah, Muhammad Shukri and Pei-, Chun Lin Fuzzy random based mean variance model for agricultural production planning. In: The 4th International Conference on Soft Computing and Data Mining (SCDM 2020), 22-23 January 2020, Melaka, Malaysia.

Oyekunle, Adeleke Abdullahi (2022) Improved classifier chain methods based on heuristic optimization techniques for multi-label classification problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

R

Ramli, M. S. and Wahab, M. S. and Ahmad, M. and Bala, A. S. (2016) FDM preparation of bio-compatible UHMWPE polymer for artificial implant. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 5474-5480. ISSN 1819-6608

Raveverma, P. and Ibrahim, M. and Sa'ude, N. and Yarwindran, M. (2018) Mechanical behaviour and compatibility analysis of thermoplastic polyurethane polycaprolactone-based new fused deposition modelling filament composite. Journal of Mechanical Engineering, 5 (2). pp. 116-128. ISSN 1823- 5514

Roslam, Ahmad Nizamuddin and Zainuddin, Muhammad Amir Rahimi and Mamut, Muhammad Muhairie and Suriansah, Nur Lyana Syahirah and Basirun, Runizsyazrizan and Mahmood, Salwa and Tajurahim, Nurul Ainina Nadhirah and Ngadiman, Nor Hasrul Akhmal (2020) Ergonomic design improvement at Koko Minda Food Industries (M) Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 47-57. ISBN 978-967-2389-59-0

Rusin, Siti Ruzaimah (2005) CIM control design using grafcet. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

S

Saini, Adam (2016) Mechanical design of an automated vehicle driving system for drive cycle testing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarpin, Norliana (2015) Developing people capabilities for the promotion of sustainability in facility management practices. Doctoral thesis, Queensland University of Technology.

Sazali, N. and Wan Salleh, W. N. and Nur Izwanne, M. and Harun, Z. and Kadirgama, K. (2018) Precursor selection for carbon membrane fabrication: a review. Journal of Applied Membrane Science & Technology, 22 (2). pp. 131-144. ISSN 2600-9226

Seng, Sim Man and Yeow, You Kok and Esa, Fahmiruddin and Dimon, Mohamad Ngasri and Khamis, Nor Hisham (2018) Multiband metamaterial microwave absorbers using split ring and multiwidth slot structure. International Journal of RF and Microwave Computer-Aided Engineering, 31 (12). pp. 1-13. ISSN 1099-047X

Setiawan, Roy and Cavaliere, Luigi Pio Leonardo and Chowdhury, Arup Roy and Koti, Kartikey and Mittal, Praveen and Subramaniam, Tamil Selvan and Rajest, S. Suman and Regin, R. and Singh, Sonia (2021) The impact of motivation on employees productivity in the retail sector: the mediating effect of compensation benefits. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (6). pp. 8159-8190.

Sh Ahmad, Sh Salleh (2009) Bottleneck adjacent matching heuristics for scheduling a re-entrant flow shop with dominant machine problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shaath, M. L. M. and Ansar, M. N. M. and A., Atiqah and Hamdan, A. (2019) Tensile properties of Poly Lactic Acid (PLA)–Tungsten Trioxide (WO3) nano composites for 3D printing process. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 2511-2513. ISSN 2249 – 8958

Shafie, Fazira (2013) FM Help Desk: user complaint system as an FM approach for facilities management services in Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahbaz, Muhammad Saeed (2019) The role of risks, collaboration and performance in the supply chain of manufacturing firms of Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shahbaz, Muhammad Saeed and Rasi, R.Z.R. and Zulfakar, M. H. and Ahmad, M. F. and Abbas, Z. and Mubarak, M. F. (2018) A novel metric of measuring performance for supply chain risk management drawbacks and qualities of good performance. Journal of Fundamental and Applied Sciences, 10 (3s). pp. 967-988. ISSN 1112-9867

Shamsudin, Muhamad Khairy (2014) Kajian terhadap sifat mekanik bagi jenis corak pengisian dalam proses pembuatan tiga demensi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shiau, Wei Chan and Ahmad, M.F. and Ismail, Fadillah and Ngadiman, Yunos and Zaman, Izzuddin and Omar, Siti Sarah and Kian, Yuen Tay (2018) Comparative study of product quality perception between Malaysian and non Malaysian electrical appliance among tertiary students. International Journal of Supply Chain Management, 7 (3). pp. 87-93. ISSN 2051-3771

Shiau, Wei Chan and Zaman, Izzuddin and Ahmad, Md Fauzi and Check, Yee Liew (2018) Identification of the concept selection method for product design and development in the manufacturing industry. International Journal of Engineering & Technology, 7 (2.29). pp. 352-355. ISSN 2227-524X

Shukri, Muhammad Shazwan and Marwah, Omar Mohd Faizan and Ibrahim, M. and Sharif, S. and Mohamad, Elmy Johana and Hashim, Mohd Yussni (2018) Collapsibility of PMMA based material in direct investment casting. Journal of Advanced Manufacturing Technology, 12 (1 (2)). pp. 501-512. ISSN 1985-3157

Sidek, Kamsidi @ Abd Malek (2013) Production improvement in ACM manufacturing company using lean manufacturing approach. Masters thesis, Universiti Tun Hussein Malaysia.

Sidek, Noor Azizah (2021) A guided artificial bee colony (GABC) heuristic for permutation flowshop scheduling problem (PFSP). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

T

T., Norfazillah and Amiril, S. A. S. and Rahim, E. A. and Saiful, A. C. G. and Syahrullail, S. (2018) Tribological evaluations of modified RBD palm olein-based lubricants in machining processes. Jurnal Tribologi, 19. pp. 98-106. ISSN 2289-7232

TENGKU ZAINAL ABIDIN, TENGKU ZARITH HAZLIN and MAT ALI, NURIN NAJMINA and ABU BAKAR, FAZLEEN IZZANY and AHMAD BAKRI, FAIZNUR AIN and ABU BAKAR, MOHD FADZELLY and MALIK, NUR HAFIZAH and ZAINAL ABIDIN, MUNIRA (2023) Nutritional Composition and Antioxidant Activity of Freshwater Lobster in Malaysia: A Short Review. Asian Journal of Chemistry, 35 (2). pp. 301-304.

Tajul Ariffin, Syazwana (2019) Relationship of economies of scale (EOS) factors for Malaysian Industrialised building system (IBS) precast manufacturer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tajurahim, Nurul Ainina Nadhirah and Edirudzin, Muhammad Aizrul Ezuan and Nordin, Muhammad Alif Haziq and Mohd Esa, Faezah and Mahmood, Salwa (2020) Development of layout design and improvement of the working flow at Erul Food Industries. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 8-21. ISBN 978-967-2389-59-0

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Ngadiman, Nor Hasrul Akhmal (2020) Improvise the working condition at Kilang Beras Jelapang Selatan (M) Sdn. Bhd. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 99-108. ISBN 978-967-2389-59-0

Tasmin, Rosmaini and Takala, Josu and Abu Bakr, Aliyu Alhaji and Shylina, Daryna and Nizialek, Izabela and Che Rusuli, M.S. (2016) Sustainable competitive advantage (sca) analysis of furniture manufacturers in malaysia: normalized scaled critical factor index (NSCFI) approach. Management and Production Engineering Review, 7 (2). pp. 73-85. ISSN 20808208

Tay, Shu Ing (2020) Industrial revolution 4.0 implementation: current practice and barriers in manufacturing firms of Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ibrahim, Tuan Mohd Hafeez and Ismail, Suhairi and Basharie, Siti Mariam and Abdul Rahman, Muhammad Qusyairi and Ahmad, Muhammad Shukri and Soo, Jun Chun and Osman, Muhammad Nur Fikri and Baskaran, Simresan (2020) Camera stabilizer. In: Innovative Product Design for Industrial Application. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-12-5

U

Ur Rehman, Fazal and Md Yusoff, Rosman and Ismail, Fadillah and Javed, Farwida (2018) What is brand? Some insights in the historical development. Information Management and Business Review, 10 (4). pp. 8-13. ISSN 2220-3796

W

W. K., Lee and Abdullah, M. D. and P., Ong and Abdullah, H.Z. and Teo, Teo (2021) Prediction of flank wear and surface roughness by recurrent neural network in turning process. Journal of Advanced Manufacturing Technology (JAMT), 15 (1).

Wan Samsuddin, Wan Roslina and Omar, Abdul Jalil (2018) Social care facility management in Malaysia: A case of Hospital Permai Tampoi, Johor Bahru. Rekod SMPU Eprints - Artikel Jurnal (AJ) 01.11.2021 Rekod SMPU Eprints - Artikel Jurnal (AJ) 01.11.2021 .XLSX 75% 10 F22 Advanced Science Letters Screen reader support enabled. Advanced Science Letters Turn on screen reader support Nur Rasyidah, 24 (5). pp. 3116-3119. ISSN 1936-7317

Y

Yahya, Mohd Shahir (2021) A contingency-based decision support instrument for selecting lean production tools and techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yahya, Mohd Shahir and Mohammad, Musli and Omar, Badrul and Ramly, Edly Ferdin (2018) Lean tools and techniques: a comparison between Malaysian manufacturing and services organisations. International Journal of Engineering & Technology, 7 (3.7). pp. 345-348. ISSN 2227-524X

Yahya, Mohd Shahir and Mohammad, Musli and Omar, Badrul and Ramly, Edly Ferdin (2016) A review on the selection of lean production tools and techniques. ARPN Journal of Engineering and Applied Sciences, 11 (2). pp. 7721-7727. ISSN 1819-6608 (Unpublished)

Yee, Mei Heong and Hamdan, Nuraffefa and Masran, Saiful Hadi and Ibrahim, Badaruddin and Tee, Tze Kiong and Kok, Boon Ching and Azid, Nurulwahida (2022) Needs analysis of thinking style and higher order thinking skills for solving problems in producing products. Online Journal for TVET Practitioners (OJ-TP), 7 (1). pp. 20-30.

Yeoh, Kim Hao (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Malaysia.

Yeoh, Kim Hao (2020) Heuristics method for truck disassembly process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yin Lee, Jocelyn Ke and Gholami, Hamed and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal and Zakuan, Norhayati and Mahmood, Salwa and Omain, Siti Zaleha (2021) Sustainability-oriented application of value stream mapping: a review and classification. Open Access Journal, 9. pp. 68414-68434.

Z

Zainudin, Amira Syuhada (2017) Dynamic weighted idle time heuristic for flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Nur Syuhada (2018) A framework for green manufacturing practicies in small and medium enterprises in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zamri, Shafeeka Fadlikh (2021) The impact of lean six sigma practices based on industrial revolution 4.0 towards balanced scorecard indicators in Malaysia manufacturing sector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Muhammad Farez Najmi and Bong, Leo and Mohd Yaacob, Nur Syuhada and Yap, Alycia Ching Hui and San, Chin Whay and Mahmood, Salwa and Mohamed, Norirda (2020) Improvement on work measurement at Pau Mira Frozen Food Industry. In: Manufacturing Management and Improvement. Penerbit UTHM, pp. 58-71. ISBN 978-967-2389-59-0

This list was generated on Mon Dec 2 04:25:00 2024 +08.