Items where Year is 2008

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items: 262.

Ab. Rahman , Munirah (2008) Analisis dan penilaian prestasi lengah lepas tangan menggunakan protokol pencetusan sesi (SIP) bagi sistem terintegrasi UMTS-WLAN. Masters thesis, Universiti Kebangsaan Malaysia.

Adnan, Suraya Hani and Lee, Yee Loo and Abdul Rahman, Ismail and Mohd Saman, Hamidah and Soejoso, Mia Wimala (2008) Water permeability of micronised biomass silica concrete. In: Proceedings of the International Graduate on Engineering and Science , 23-24 December 2008, Johor.

Ahmad, Mohd Fadhli (2008) Amalan pentaksiran pengajaran dan pembelajaran di Kolej Komuniti di negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Ahmad Hadi and Rubani, Siti Nur Kamariah (2008) Problem-based learning in physics education: a study on engineering students. In: National Seminar on Engineering and technopreneurship, 23 - 24 October 2008, Kuala Lumpur.

Amirnordin, Shahrin Hisham and Abd. Rahman, Hamimah and Othman, Khairul Nor and Hassan, Mohd Fahrul and Alimin, Ahmad Jais (2008) Effects of porous ceramic/zeolite to the exhaust system of gasoline engine. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) : 21-23 May 200, Johor Baharu. Universiti Tun Hussein Onn Malaysia, Batu Pahat, Johor, pp. 1-6. ISBN 9789832963592

Che Abd Razak, Nohayati Sa'adah (2008) Gaya pembelajaran pelajar kejuruteraan di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Radzi, Muhammad Firdaus (2008) Tahap kematangan e-pembelajaran:satu kajian di Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Mohd Norasri (2008) A data model for multimedia database of Malaysian cultural heritage artefacts management. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Othman, Safiah (2008) A numerical study of transient natural convection of water near its density extremum. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), Puteri Pacific Johor Bahru, Johor, Malaysia .

A

Ab Hadi, Mohd Yusop and Esa, Ahmad and Vinayagam, Yogeshwari and Yasak, Zurina (2008) Sumbangan kurikulum dan kokurikulum bagi penguasaan kemahiran generik terhadap pelajar tahun akhir UTHM. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Ab Rahman, Azmanirah and Muhammad Hanafi, Nurfirdawati (2008) Sikap pensyarah terhadap penggunaan bBackboard 6 dalam proses pengajaran dan pembelajaran di UTHM. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Ab. Hadi, Mohd Yusop and Mohamad, Baharom and Hashim, Jamaluddin and Razzaq, Abdul Rashid (2008) Analisa komunikasi dua hala guru dengan pelajar dalam persediaan mengajar guru pelatih. In: International Conference On Communication And Media (i COME 2008), 14-17 Jun 2008, Kuala Lumpur.

Abd Aziz , Muhammad Khairul Arifin (2008) Current transformer performance in high voltage and low voltage systems. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Ahmad Tarmizi and Abdul Latiff, Ab Aziz (2008) Adsorption properties of As, Pb AND Cd in soft soil and meta sedimentary residual soil. In: Engineering Postgraduate Conference , Bangi, Selangor.

Abd Rahman, Hamimah and Abdullah, Mohd Noor (2008) Preparation and characterization of alumina-zeolite foam. In: ProConference on Functional Materials and Devices 2008 (ICFMD 2008), 16-19 June 2008, Kuala Lumpur.

Abd Rahman, Hamimah and Yacob, Dzul Hafez (2008) Effects of double sintering on the properties of porous ceramic. In: 3rd Brunei International Conference on Engineering and Technology 2008, 3rd-4th November 2008, Brunei.

Abd Rahman, Hamimah and Yap , Ching Guan (2008) Characterization of alumina foam from casting process. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 Mei 2008, Johor Bahru, Johor, Malaysia.

Abd Rahman, Hamimah and Yacob, Dzul Hafez (2008) Effect of double sintering on the properties of porous ceramic. In: 3rd Brunei International Conference on Engineering and Technology 2008, 3 - 5 November 2008, Brunei.

Abd Umar, Zaidah and Senin, Zulkifli (2008) Perkaitan antara gaya pembelajaran pelajar dengan prestasi matapelajaran Matematik Kejuruteraan. In: Seminar Kebangsaan Matematik dan Masyarakat 2008 , 13-14 Februari 2008, Kuala Terengganu .

Abd Wahab, Mohd Helmy (2008) A web-based appointment system through GSM network. In: Regional Conference on Computational Science and Technologies (RCCST 2007).

Abd Wahab, Mohd Helmy and Abdul Kadir, Herdawatie and Ahmad, Nadiah and Abdul Mutalib, Ariffin and Mohd Mohsin, Mohd Farhan (2008) Implementation of network-based smart order system. In: International Symposium on Information Technology 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Abdul Ghani, Norjihan and Suparjoh, Suriawati and Hamid, Suraya (2008) A framework for online publishing in the University of Malaya. In: The 9th International Business Information Management Association Conference, 4 - 6 January 2008, Marrakech, Morocco.

Abdul Ghani , Mohd Rusmi (2008) Three phase induction motor inverter application for motion control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Intan Sue Liana (2008) Reynolds number effects in designing a micromixer for biomems application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, M. Mahadi and M.C.T. , Denyer and M. , Youseffi and S.T. , Britland and S. , Liu and C.W. , See and M.G. , Somekh and J. , Zhang (2008) Imaging of the cell surface interface using objective coupled widefield surface plasmon microscopy. Journal of Structural Biology, 164 . ISSN 10478477

Abdul Kadir, Aeslina and Mohajerani, Abbas (2008) Physico-mechanical properties and leachate analysis of clay fired bricks incorporated with cigarette butts. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Abdul Kadir, Herdawatie and Mohd Kanafiah, Siti Nurul Aqmariah and Abd. Wahab, Mohd Helmy (2008) Boarding school students monitoring systems (e-id) using RFID. In: 4th International Conference Information & Communication Technology and System4th International Conference Information & Communication Technology and System.

Abdul Kadir, Herdawatie and Mohd Kanafiah, Siti Nurul Aqmariah and Abd. Wahab, Mohd Helmy and Tukiran, Zarina and Abdul Kadir, Zulida (2008) Online students supervision (OSS ) systems using passive RFID. In: International Conference on Electronic Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Abdul Wahab, Abas (2008) Eqwin turbine – the break through for wind energy implementation in Malaysia. In: Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21– 23 May 2008, Johor Bahru, Malaysia., 21-23 May 2008, Johor Bahru.

Adnan, Suraya Hani and Lee , Yee Loon and Abdul Rahman , Ismail and Mohd Saman, Hamidah and Soejoso, Mia Wimala (2008) Water permeability of micronised biomass silica concrete. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Ahmad, Abd. Rahman and Mohamed Idris, Mohammad Talha (2008) Managing knowledge management through strategic management perspectives. In: 10th International Business Information Management Association Conference, 30 June - 2 July 2008, Kuala Lumpur.

Ahmad, Abd. Rahman and Ramlan, Rohaizan (2008) Managing human resource development through balanced scorecard perspective. In: Seminar on Managing human resource development through balanced scorecard perspective, 2008, Malaysia University of Technology.

Ahmad, Abd. Rahman and Shamsudin, Alina and Ali, Maimunah and Md Nor, Harris and Ramin, Ahmad Kaseri (2008) A study on business and technology strategy in achieving business objectives. In: Asia Pacific Conference on Management of Technology and Technology Entrepreneurship, 29 - 30 October 2008, Melaka.

Ahmad, Md Zarafi and Zamri, K. and Zulkifli, Shamsul Aizam and Hamdan, Rohaiza and Sulaiman, Erwan (2008) Energy saving in the implementing LED luminaries for internal lighting. In: The 2nd International Power Engineering and Optimization Conference (PEOCO2008) , 4-5 June 2008, Shah Alam, Selangor, Malaysia.

Ahmad, Mohd Hilton (2008) Analisis struktur menggunakan kaedah unsur terhingga. In: Seminar Kebangsaan Matematik dan Masyarakat 2008 , 12-14 Februari 2008, Kuala Terengganu .

Ahmad, Mohd Hilton and Lee, Yee Loon and Mohd Noor, Nurazuwa and Adnan, Suraya Hani (2008) Strength development of lightweight styrofoam concrete. In: International Conference on Civil Engineering (ICCE08), 12-14 May 2008, Hyatt Regency Kuantan Resort, Kuantan, Pahang.

Ahmad, Mohd Hilton and Mohd Noor, Nurazuwa (2008) Mix design of palm oil fiber concrete. In: International Conference on Civil Engineering (ICCE08), 12-14 May 2008, Kuantan, Pahang.

Ahmad, Noor’ani and Abd Hamid , Nor Rahmah and Amir Hamzah, Nor Shamsidah (2008) Pelaksanaan pendekatan pembelajaran berasaskan masalah (PBM) dalam Subjek Matematik Kejuruteraan 1 untuk sampel Sarjana Muda Fakulti Kejuruteraan Awam dan Alam Sekitar di UTHM. In: Seminar Kebangsaan Matematik dan Masyarakat 2008, 13-14 Februari 2008, Kuala Terengganu .

Ahmad , Abd. Rahman and Md. Sapry, Hairul Rizad (2008) Brand competitiveness: a study of cement brand in Malaysia. In: International Accounting and Business Conference 208, 18 - 19 August 2008., Johor Bahru, Johor..

Ahmad , Afandi and Loo, K. K. and Cosmas, J. (2008) A survey of programmable and dedicated approaches in VLSI architecture design for real-time video processing. In: ICC'08: Proceedings of the 12th WSEAS International Conference on Circuits, 19-23 May 2008, Beijing, China. (Unpublished)

Ahmad Bareduan, Salleh and Hasan, Sulaiman (2008) Bottleneck-based makespan algorithm for cyber manufacturing system. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008), 21-23 May 2008, Johor Baharu. Universiti Tun Hussein Onn Malaysia, Batu Pahat, pp. 1-9. ISBN 9789832963592

Ahmad Bareduan, Salleh and Hasan, Sulaiman and Ariffin , Saparudin (2008) Finite scheduling of collaborative design and manufacturing activity: a Petri net approach. Journal of Manufacturing Technology Management, 19 (2). pp. 274-288. ISSN 1741-038X

Ahmad Bareduan, Salleh and Hassan, Sulaiman (2008) Bottleneck adjacent matching 1 (bam1) heuristic for re-entrant flow shop with dominant machine. In: International Conference on Computers and Industrial Engineering,, 31 October - 2 November 2008, Beijing, China.

Ahmad Zaidi, Ahmad Mujahid and Abdul Hamid, H. and Ahmad Zaidi, N. H. and Ahmad Zaidi, A.F. and Yusof, M.S. (2008) Investigation of damage and fracture properties of a ring cut from filament-wound pipes with and without delamination. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Ahmad Zaidi, Ahmad Mujahid and Md Asif, M.M. and Ahmad Zaidi, N.H. and Yusof, M.S. (2008) Analysis of cracked in thick-tube using finite element modelling. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Ahmat Nor, Nor Irwan and Md. Arifin, Norazimah and Kamarudin, Sofia (2008) A study on the effectiveness of the on-site detention (OSD) for water quality control. In: International Organisation for Biotechnology and Bioengineering (IOBB) 1st International ConferenceOn Technologies & Strategic Management of Sustainable Biosystems, 6-9 July 2008, Perth, Western Australia.

Ali, Ahmad Hadi (2008) Design and fabrication of high-precision x-translational and rotational controlled motorized stage (CMS). In: International Conference on Electric Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Alias, Maizam and Zakaria, Norsuzana (2008) Methods of teaching and goals of teaching: teaching styles of teachers in higher institutions. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Azman, Azreen Harina (2008) Penerapan kemahiran generik dalam pengajaran program pendidikan kejuruteraan di politeknik Kementerian Pengajian Tinggi Malaysia (KPTM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azroai, Anis Mardhiyah (2008) Kerangka program pendidikan berterusan bagi bidang teknik dan vokasional berorientasikan pembangunan lestari. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bachok , Andi Norasyikin (2008) Numerical modelling in investigation of road failure on Malaysia peat soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bareduan, S. A. and Haji Hasan, Sulaiman (2008) Bottleneck adjacent matching 3 (BAM3) heuristic for re-entrant flow shop with dominant machine. Industrial Engineering and Engineering Management, 2008. IEEM 2008. IEEE International Conference .

Basarahim , Bazlina (2008) Kemahiran menvisualisasi ruang dalam kalangan pelajar pendidikan khas (cacat pendengaran) politeknik Kementerian Pengajian Tinggi Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bon, Abdul Talib and Marc, Jean and Razali, Ahmad Mahir (2008) Optimization techniques for business process analysis on automotive industry in Malaysia. In: Procedings of the 3rd International Borneo business process analysis on automotive industry in Malaysia, 2008, Kota Kinabalu, Malaysia.

C

Chee, Ming Chan and Abdullah, Siti Hajarahani (2008) Settlement behaviour of a cement-stabilised Malaysian clay. In: 6th International Conference on Case Histories in Geotechnical Engineering, 11-16 August 2008, Arlington, VA.

Chua , King Lee (2008) The fastest Chinese abacus adder. In: ACST '08: Proceedings of the Fourth IASTED International Conference on Advances in Computer Science and Technology.

E

Esa, Ahmad and Md Yunos, Jailani and Kaprawi, Noraini (2008) Kokurikulum di politeknik membantu bekas pelajar mengaplikasi kemahiran generik dalam sektor perindustrian di Malaysia. Jurnal Persatuan Pendidikan Teknik dan Vokasional, 2 (1). pp. 80-96.

Esa, Ahmad and Mohamad, Baharom and Mohd Salleh, Berhannudin and Awang, Fauzianna (2008) Penguasaan kemahiran insaniah dalam kalangan pelajar kejuruteraan melalui pembelajaran koperatif : tinjauan di Universiti Kuala Lumpur Malaysia France Institute (UniKL MFI) dan Universiti Teknologi Malaysia (UTM). In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

F

Fulazzaky, Mohamad Ali (2008) Integrated water resources management – in view of environmental sustainability aspects. Penerbit UTHM. ISBN 978-983-2963-75-2

G

Guterres, Anuciano Domingos Pinto (2008) The structural behaviour of low - rise residential building due to wind and seismic loads. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hadi , Sapinah (2008) Kajian terhadap jenis dan format program latihan dalam program pembangunan profesionalisme di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hafit, Hanayanti and Kamaludin, Hazalila and A Hamid, Isredza Rahmi and Mohd Sukri, Khairul Amin and Mohd Haris, Noor Farah Shahida (2008) A prototype of server’s temperature monitoring system using ADAM and ADAMView. In: International Conference on 17th – 19th November 2008 Information Technology and Multimedia at UNITEN (ICIMU’ 2008), 18 - 19 November 2008, Bangi, Selangor.

Hariri, Azian and Sebayang, Darwin and Wibowo, Ignatius Agung (2008) Response analysis of UTHM’s airship. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Harun, Zawati and Gethin, D. T. and Lewis, R. W. (2008) Combined heat and mass transfer for drying ceramic (shell) body. International Journal of Multiphysics, 2 (1). ISSN 17509548

Hashim, Mohd Nurhanif (2008) Simulation model for effective supply chain management using arena. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Hashim, Jamaluddin and Hussein, Atan and Aziz, Noor Azizah and Ab. Hadi, Md. Yusop and Zainal Abidin, Ramlan (2008) Kolaborasi IPTA dan industri dalam penerapan kemahiran insaniah. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18 Ogos 2008, Hotel Mahkota, Melaka.

Hassan, Razali (2008) How do learners respond to computer based learning material which has been designed to suit their particular learning style. PhD thesis, University of Warwick, Institute of Education.

Hassan , Nurhafizzah (2008) A preliminary study of turning of composite. Masters thesis, University of Liverpool.

Hj. Mohd, Mohd. Norzali and Abd Wahab, Mohd Helmy and Yaakob, Amir (2008) ‘Halal’ logo detection and recognition system. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, Universiti Tenaga Nasional (UNITEN).

Ho, Meei Hoan (2008) Some mechanical and chemical properties of cement stabilized Malaysian soft clay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ho, Fu Haw (2008) Production scheduling system for job shop enterprise using ant colony optimization approach. Masters thesis, Universiti Teknologi Malaysia.

Husaini, Muhammad Haron and Ahmad, Khairul Anuar (2008) Kemahiran keusahawanan: satu kajian analisis kandungan buku-buku teks. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18-19 Ogos, 2008, Hotel Mahkota, Melaka.

I

Ibrahim, Badaruddin and Daud, Md Razak and Mohd Salleh, Kahirol and Mustafa, Mohd Zaid and Sulaiman, Norlisa (2008) Pelaksanaan latihan sambil kerja (OJT) satu tinjauan di Institut Latihan Perindustrian (ILP) Kementerian Sumber Manusia. In: National Conference on Skills and Competencies in Education 2008, 16 February 2008, Science University of Malaysia.

Ibrahim, Badaruddin and Lian, Siew Ting and Mohd Salleh, Kahirol and Sulaiman , Nor Lisa and Mustafa , Mohamad Zaid (2008) Tingkah laku asertif dan tahap kepuasan kerja dalam kalangan pensyarah universiti. In: The 6th International Malaysian Studies Conference (MSC6), 5-7 August 2008, Kuching, Sarawak.

Ibrahim, Siti Aida and Baharun, Norlia (2008) Synthesis and characterization of zeolite from sodium aluminosilicate solution. In: 4th International Conference On X-rays and Related Techniques In Resarch and Industries 2008 (ICXRI 2008) , 2-6 June 2008 , Universiti Malaysia Sabah (UMS) Kota Kinabalu, Sabah.

Ibrahim, Siti Aida and Baharun, Norlia (2008) Synthesis and characterization of zeolite from sodium aluminosilicate solution. In: 4th International Conference on X-rays and Related Technique in Research and Industries 2008 (ICXRI 2008) , 2-6 Jun 2008, UMS, Kota Kinabalu, Sabah.

Ibrahim Mukhtar, Marina and Roddin, Rohayu and Ahmad Sapawi , Arman (2008) Pendidikan Teknik dan Vokasional dalam kalangan masyarakat Orang Asli. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Ibrahim@Tamrin, Mohd Norihan (2008) Stiffness and vibrational characteristics of SMS/DER331 composites with shape memory alloy long fibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Khalid (2008) Experimental studies on dynamics performance of lateral and longitudinal control for autonomous vehicle using image processing. In: IEEE 8th International Conference on Computer and Information Technology (CIT2008), 8-11 July 2008, Sydney, Australia.

Isa, Khalid and Mohamed, Masnani and Jalani , Jamaludin and Tukiran, Zarina and Jumaat, Siti Amely and Fuad, Norfaiza and Ahmad, Ida Laila and Mohamad, Shamsul and Mohd Muji , Siti Zarina (2008) Peranan kem motivasi pelajar harapan PROPEMP dalam membantu meningkatkan kecemerlangan akademik pelajar FKE. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Ishak, Mohd Fakhrurrazi and Zainal Abidin, Mohd Hazreek (2008) The prediction of final settlement from 1D-consolidation test: a case study. In: International Conference on Civil Engineering Practice (ICCE08), 12-14 May 2008, Kuantan, Pahang.

Ismail, Al Emran (2008) Sound generated during the compaction of alumina reinforced aluminum powders. In: International Colloquium on Signal Processing and its Applications, 7 - 9 March 2008, Kuala Lumpur.

Ismail, Mohd Fazli Khaisunizam (2008) Model kognitif visual pelajar teknikal melalui perisian animasi grafik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismoen, Muhaimin and Kandasamy, Ramasamy and Ishak , Hashim and Kasmani, Ruhaila (2008) Thermophoresis and chemical reaction effects on non-Darcy mixed convective heat and mass transfer past a porous wedge with variable viscosity in the presence of suction or injection. Nuclear Engineering and Design, 238 (10). pp. 2699-2705. ISSN 00295493

J

Jabbar, Mohamad Hairol (2008) BinDCT design and implementation on FPGA with low power architecture. Masters thesis, Liverpool John Moores University.

Jalani, Noor Hisham (2008) Position control for linear motion servo system via nominal characteristic trajectory following controller. Masters thesis, Universiti Teknologi Tun Hussein Onn Malaysia.

Jamel, Sapiee and Saidin, Nurulashikin and Mohamed Hasan, Ahmad Fathihalil and Mahdzir, Ahmad Naqiyuddin and Zainol, Nurzahanim (2008) Algorithm animation of LOKI97, MARS, Pseudo-Hadamard Transform and Latin Square. In: 4th International Conference Information Technology and Multimedia (ICIMU’ 2008), 17th – 19th November 2008, UNITEN, Kajang, Selangor.

Jamel, Sapiee and Saidin, Nurulashikin and Mohamed Hasan, Ahmad Fathihalil and Mahdzir, Ahmad Naqiyuddin and Zainol, Nurzahanim (2008) Algorithm animation of LOKI97, MARS, Pseudo-Hadamard transform and Latin Square. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Jumaat, Siti Amely and Mustafa, Mohd. Wazir (2008) Analysis of six-phase system for transmission line. In: The 2nd International Power Engineering and Optimization Conference (PEOCO2008) , 4-5 June 2008, Shah Alam, Selangor, Malaysia.

Jumaat, Siti Amely and Mohd. Mujib, Siti Zarina and Ahmad, Ida Laila and Tukiran, Zarina and Jalani , Jamaludin and Isa, Khalid and Fuad, Norfaiza and Mohamed, Masnani and Mohamad, Shamsul (2008) Mampukah seminar kerjaya kejuruteraan kuasa meningkatkan motivasi diri kepada pelajar di IPT? In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Jumaat, Siti Amely and Mohd. Mujib, Siti Zarina and Ahmad, Ida Laila and Tukiran, Zarina and Jamaluddin, Jailani and Isa, Khalid and Fuad, Norfaiza and Mohamed, Masnani and Mohamad, Shamsul (2008) Mengkaji keberkesanan Program Budaya Ilmu “Effective Presentation & Engineering Report Writing” ke atas pelajar. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Jumaat, Siti Amely and Mustafa, Mohd Wazir (2008) Analysis of sixphase system for transmission line. In: The 2nd International Power Engineering and Optimization Conference (PEOCO2008) , 4-5 June 2008, Shah Alam, Selangor, Malaysia.

K

KAMARUDDIN, NOOR AZIM and TJAHJANTO, DWI (2008) Automatic sliding gate used to control water level of a channel in flat urban area. In: National Seminar on Engineering Technopreneurship, 23 - 24 October 2008, Kuala Lumpur.

Kamaruddin, Sharul Ashikin (2008) Zinc oxide nanostructures:the effect of deposition parameters on the electrical properties usig sol-gel method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Mohd Fauzi and Sidek, Muliati and Abdul Majid, Izaidin and Ibrahim, Ismail and Mohamad Sharif , Sabri and Mohamed, Mimi Nahariah Azwani (2008) Tahap penguasaan Bahasa Inggeris di kalangan staf akademik di sebuah Universiti Teknikal. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18 Ogos 2008, Hotel Mahkota, Melaka.

Kamarudin, Muhammad Saufi and Sulaiman, Erwan and Ahmad, Md Zarafi and Zulkifli, Saiful Aizam and Othman, Ainul Faiza (2008) Impulse generator and lightning characteristics simulation using orcad PSpice software. In: 2nd Regional Engineering Conference 2008 (EnCon 2008), 18-19 December 2008, Kuching, Sarawak, Malaysia. (Submitted)

Kamarudin, Muhammad Saufi and Zulkifli, Shamsul Aizam and Sulaiman, Erwan and Mokhtar, Nur Hidayah (2008) A detailed comparative study of ABC and symmetrical component classification for fault analysis. In: The 2ndInternational Power Engineering and Optimization Conference (PEOCO2008), 4-5 June 2008, Shah Alam, Selangor.

Kamsah, Mohd Zaki and Abu, Mohd Salleh and Razzaly, Wahid (2008) Penerapan kemahiran insaniah (KI) kepada pelajar dalam aktiviti pengajaran & pembelajaran di IPTA. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18 Ogos 2008, Hotel Mahkota, Melaka.

Kaprawi, Noraini and Razzaly, Wahid and Azroai , Anis Mardhiyah (2008) A framework of sustainable development in continuing engineering education programmes in Malaysia. In: Conference on Continuing Engineering and Technical Education (ICCEE08), Diponegoro University, Semarang, Indonesia , 20-21 August 2008.

Kasim, Narimah (2008) Improving materials management on construction projects. PhD thesis, Loughborough University.

Katimon, Mohd Nizam (2008) Optimisation deep drawing process parameters using FE simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kho, Yeh Yiian (2008) Web-based interface system for bedside monitor. Masters thesis, Kolej Universiti Teknologi Tun Hussien Onn.

Koh , Heng Boon and Mohamad Diah, A.B. and Lee, Yee Loon and Yeoh, David (2008) Experimental study on shear behaviours of timber- lightweight concrete composite shear connectors. In: Brunei International Conference on Engineering and Technology., 2008, Institut Teknologi Brunei, Brunei Darusalam.

L

Lai, Lenny Mei Lan (2008) Pengaruh motivasi dalam kreativiti pelajar kejuruteraan UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Loke, Choy Yean (2008) Skill standards for biotechnology graduates in Malaysia : an industrial perspective. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M. Amin, Sri Yulis and Muhamad, Norhamidi and Abdullah, Shahrir and Jamaludin, Khairur Rijal (2008) Kajian pengoptimuman penyahikatan larutan menggunakan kaedah permukaan sambutan. In: Seminar Advanced Manufacturing Research Group (AMREG2008), 12 Jun 2008, The Royale Bintang, Seremban.

M.Z, Mohd Fauzulazim and W.Z, Wan Suhaimizan (2008) Development of patellar reflex measurement using linear variable differential transformer. In: Congnitive informatics : bridging natural and artificial knowledge : proceedings International Symposium of Information Technology 2008, Kuala Lumpur Convention Centre, Malaysia, 26-29 August 2008. IEEE, Piscataway, NJ, pp. 1-3. ISBN 9781424423286

M.Z, Nur Shaylinda and R.M, Raden Maya Saphira and Md. Ali, Zarina and Mohd Roshidi , Mohd Roshidi and Mohd Arif , Mohd Arif and Zainalabidin, Mohd Hazreek (2008) Study on concentration of PM10 and PM2.5 particulate matter in UTHM campus by using E-sampler. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Madar, Ahmad Rizal and Abd Aziz, Malyia Afzan and Abd Razzaq , Abdul Rasid and Mustafa, Mohamad Zaid and Buntat, Yahya (2008) Kemahiran employability bagi memenuhi keperluan industri. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18-19 Ogos, 2008, Hotel Mahkota, Melaka.

Madar, Ahmad Rizal and Mustafa , Mohamad Zaid and Jaes, Lutfan (2008) Impact of teaching and learning method with multimedia application aided. In: 6th International Malaysian Studies Conference (MSC6), 5-7 August 2008, Kuching, Sarawak.

Manap, Norpadzlihatun (2008) Common problems encountered by Malaysian dredging stakeholders, the recommendation and relation to the environment. Masters thesis, Universiti Putra Malaysia.

Mansor, Raziah and Esa, Ahmad (2008) Hubungan gaya kepimpinan guru besar dengan kepuasan kerja guru di tiga buah sekolah di Seremban: proposal. In: Seminar Kebangsaan Pengurusan Pendidikan (PKPGB2008), 16 Oktober 2008, Universiti Tun Hussein Onn Malaysia. (Submitted)

Mansor, Zulkifli (2008) Pelaksanaan dan penilaian kemahiran insaniah dalam mata pelajaran kokurikulum di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marsudi, Muhammad and Abdul Wahab, Dzuraidah and Che Haron, Che Hassan (2008) Development of a product design support tool using manufacturing cycle time. In: International Conference on Computers and Industrial Engineering, 31 October - 2 November 2008, Beijing, China.

Masood, Ibrahim and Hassan, Adnan (2008) Application of full factorial experiment in designing an ANN-based control chart pattern recognizer. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Mat Jubadi, Warsuzarina and Halban, Mohd. Nazrulhafizi and Rosman, Rafidah (2008) Development of smart label using RFID to manage and organize theses collection in FKEE resource centre. In: 2nd Regional Engineering Conference 2008 (EnCon 2008), 18-19 December 2008, Kuching, Sarawak, Malaysia.

Md Ali, Zarina and Tjahjanto, Dwi and Rahmat, Siti Nazahiyah and Mohd Masirin, Mohd Idrus and Musa, Sabariah and Abd Manan, Ismail (2008) A study of sediment load: case study at Parit Botak Channel, Batu Pahat, Johor, Malaysia. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Md Ali, Zarina and Rahmat, Siti Nazahiyah and Mohammad Razi, Mohd Adib and Ahmad, Noor Aliza and Sabri, Nur Aishah (2008) Preliminary study on sediment load at Kampung Sungai Lurus shoreline. In: 2nd Engineering Conference On Sustainable Engineering Infrastructures Development And Management, 18-19 December 2008, Kuching, Sarawak.

Md Fudzee, Mohd Farhan and Abawajy, Jemal (2008) A classification for content adaptation system. iiWAS '08 Proceedings of the 10th International Conference on Information Integration and Web-based Applications & Services .

Md Fudzee, Mohd Farhan and Abawajy, Jemal (2008) A classification for content adaptation system. Proceedings of the 10th International Conference on Information Integration and Web-based Applications & Services .

Md Kamaruddin , Nafisah Kamariah and Md Amin, Zulkarnain (2008) Dilemma in teaching mathematics. In: Seminar Kebangsaan Matematik & Masyarakat 2008, 13-14 Februari 2008, Kuala Terengganu.

Md Taujuddin, Nik Shahidah Afifi and Tukiran, Zarina and Ab Rahman, Munirah and Mohd Hanapi, Azhadi (2008) Development of Network Congested Alert System (NetCAS). In: Malaysia Education Security Convention and Seminars 2008 (MyEduSec08), 17-18 August 2008, Terengganu.

Md Tomari, Razali and Jantan, Adznan (2008) Support vector machine for classify dynamic human/vehicle shapes. In: International Conference on Electronic Design, 1 - 3 December 2008, Penang, Malaysia.

Md Yunos, Jailani and Yamin, Sulaiman and Muhammad, Baharum and Esa, Ahmad and Yasak, Zurina and Mohamed Yusof, Anizam (2008) Peranan multimedia dan guru dalam pengajaran Sains, Matematik dan Teknikal dalam Bahasa Inggeris. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Md Zain, Mohamad Naaim (2008) Kecenderungan pembelajaran teknikal melalui pembelajaran koperatif di kalangan pelajar ijazah sarjana muda kejuruteraan mekanikal di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md. Diah, Noorasmahwati (2008) Penguasaan kemahiran komunikasi dalam kalangan pelajar kejuruteraan di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md. Taujuddin, Nik Shahidah Afifi and Othman, Maisara and Tukiran, Zarina (2008) Optimization for the best performance for wavelength division multiplexed passive optical network. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (EnCon 2008), 18-19 December 2008, Kuching, Sarawak.

Misdi, Masita and Abd Aziz , Wan Norhani and Abdul Razzaq, Abdul Rashid and Hashim , Jamaluddin and Baba, Mohamad Ali (2008) Kesediaan guru teknikal menjalankan proses pengajaran dan pembelajaran mata pelajaran teknikal dalam Bahasa Inggeris. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Misdi, Masita and Liew, Sarah Joan and Lim , Soon Chong Johnson and Baba , Mohamad Ali and Tan, King Hiyang (2008) The readiness of future technical teachers to teach in English. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Misdi , Masita and Baba , Mohamad Ali (2008) Malaysians politeness: modern society in the making. In: The 6th International Malaysian Studies Conference (MSC6), 5-7 August 2008, Kuching, Sarawak.

Mohamad, Baharom and Hashim, Jamaluddin and Esa, Ahmad and Hassan, Rafiza (2008) Amalan membuat keputusan dalam kalangan guru besar. In: Seminar Kebangsaan Jawatankuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Mohamad, Baharom and Suradin, Ali and Khamisan, Za’aba Helmi (2008) Peranan Pendidikan Islam dan Pendidikan Moral dalam membina sahsiah pelajar berkualiti. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Mohamad, Kamaruddin Malik and Md. Fudzee, Mohd Farhan and Salamat, Mohamad Aizi and Abdullah, Zubaile (2008) Kuasai PHP & MySQL asas : langkah demi langkah. Penerbit UTHM. ISBN 978-983-2963-57-8

Mohamad, M.H and Radzali, Mahmad Amir and Azhar, F. (2008) Aspirasi kerjaya di kalangan pelajar Kolej Komuniti. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Mohamad, Mimi Mohaffyza and Sarji, Md.Nazaruddin and Misman, Masitah (2008) Strategi pengajaran pembelajaran koperatif dalam tajuk rekabentuk dan penghasilan projek(matapelajaran kemahiran hidup). In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Mohamad , Siti Khatijah (2008) Hubungan antara jenis bahan bacaan dengan gaya pembelajaran pelajar sekolah menengah teknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Mohsin, Mohd Farhan and Abd Wahab, Mohd Helmy and Abu Bakar, Azuraliza (2008) Choosing the best knowledge acquisition for dengue dataset based on rough set approach. In: 4th International Conference on Information and Communication Technology and Systems, 5th August, 2008, Surabaya, Indonesia.

Mohamad Said, Mohamad Mohsin and Yunus, Nasruddin (2008) Halangan-halangan kepada usaha memupuk kreativiti di kalangan pelajar. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18-19 Ogos, 2008, Hotel Mahkota, Melaka.

Mohamad Sukri, Khairul Amin and Hamid Ali, Firkhan Ali and Hafit, Hanayanti and Kamaludin, Hazalila and Kamalakanan, Adihinarayanan (2008) Voice and file transmission using bluetooth technology. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Mohamad Twon Tawi , Faizal (2008) Kecerdasan kejayaan dan hubungannya dengan pencapaian akademik pelajar kejuruteraan Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Yusof, Anizam and Esa, Ahmad and Ahmad, Anisah (2008) Kemahiran interpersonal di kalangan pelajar Diploma Kejuruteraan di politeknik. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Mohammad, Baharom and Esa, Ahmad and Hashim, Mohd Noor and Ab Hadi, Mohd Yusop and Hashim, Jamaluddin and Hussin, Nur Fadzillah (2008) Pendekatan tauhid dalam kepemimpinan pendidikan. In: Seminar Kebangsaan Pengurusan Pendidiikan PKPGB 2008, 16 Oktober 2008, Universiti Tun Hussein Onn Malaysia.

Mohd, Mohd Norzali and Abd Wahab, Mohd Helmy and Yaakob, Amir (2008) ‘Halal’ logo detection and recognition system. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Mohd Ariff, Mohd Hisyam (2008) Field estimation of induction motor performance using dynamometer method and equivalent circuit method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Bakri, Muhammad Hassan (2008) The comparison between conventional and industrialized building system formwork towards sustainable construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Faiz, Nur Sofurah and Mamat, Norsuhaila and Mohamed, Maziana and Sulong, Muhammad Suhaimi and Burhannuddin, Mohd Faiz (2008) Perceptions and acceptance towards PBL approach: a case study on technical & vocational students. In: Paris International Conference on Education, Economy and Society 2008, 17 - 19 July 2008, Novotel Hotel Tour Eiffel, Paris.

Mohd Hatta, Mohamed Nasrul and Akashah, Nairul Akmar (2008) Mechanical properties of polystyrene/polypropylene reinforced coconut and jute fibers. In: CUTSE International Conference 2008, 24-27 November 2008, Miri, Sarawak.

Mohd Jaini, Zainorizuan (2008) Crack cronology of reinforced concrete beam under impact loads. Masters thesis, Swansea University.

Mohd Kassim, Amir Hashim and A. N., Nur Irwan and M.A, Norazimah (2008) Kajian rekabentuk loji rawatan air berskala kecil (mini) mengikut spesifikasi loji air Sri Gading, Batu Pahat, Johor. In: Engineering Postgraduate Conference (EPC), 21-22 Oktober 2008, Bangi, Selangor.

Mohd Masirin , Mohd Idrus and Abd Aziz, Azizan and Adon@Mohd Don, Rashidah (2008) Environmental geotechnics: introduction to young minds for sustainable environment and development. In: 1st National Seminar on Environment, Development and Sustainability (PSISenviro2008), 28-29 July 2008, Selangor, Malaysia.

Mohd Masirin , Mohd Idrus and Ridzuan, Mohd Baharudin and Mustapha, Shahabudin and Adon@Mohd Don, Rashidah (2008) An overview of landfill management and technologies: a Malaysian case study at Ampar Tenang. In: 1st National Seminar on Environment, Development and Sustainability (PSISenviro2008), 28-29 July 2008, Selangor, Malaysia.

Mohd Mohsin, Mohd Farhan and Abd Wahab, Mohd Helmy (2008) Comparing the knowledge quality in rough classifier and decision tree classifier. In: International Symposium on Information Technology 2008, Kuala Lumpur Convention Centre, Kuala Lumpur, Malaysia.

Mohd Noh, Norasyidah (2008) Penguasaan kemahiran insaniah dalam kalangan pensyarah terhadap pengurusan makmal di politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh , Faridah Hanim (2008) Voltage sag waveform features extraction using matlab. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Nazihah (2008) Kesediaan bakal pendidik teknik dan vokasional menerima penempatan yang ditetapkan. Masters thesis, Universiti Teknologi Tun Hussein Onn Malaysia.

Mohd Noor, Siti Noor Fazelah (2008) Language needs for hotel and catering students: a proposal for syllabus design. In: LSP 2008: 6th Language For Specific Purposes International Seminar, 9 -10 April 2008, Persada Johor International Convention Centre, Johor Bahru, Johor.

Mohd Noor, Siti Noor Fazelah (2008) Developing language syllabus for hotel and catering students: Malaysian polytechnic case study. In: International Technology Education and Development Conference (INTED2008), 3-5 March 2008, Valencia.

Mohd Razi, Mohd Adib and Tjahjanto, Dwi and Wan Mohamed, Wan Afnizan and Ishak, Nur Bazilah (2008) Investigation of the properties of flow beneath a sluice gate. In: International Conference on Civil Engineering (ICCE08), 12-14 May 2008, Hyatt Regency Kuantan Resort, Kuantan, Pahang.

Mohd Razi, Mohd Adib and Tjahjanto, Dwi and Wan Mohamed, Wan Afnizan and Husin, Siti Norashikin (2008) Evaluation of unsteady open channel flow characteristics over a crump weir. In: International Conference on Civil Engineering Practice (ICCE08), 12-14 May 2008, Kuantan, Pahang.

Mohd Salleh, Kahirol and Ibrahim, Wan Nur Hidayah and Sulaiman , Nor Lisa and Ibrahim, Badaruddin and Mustafa, Mohamad Zaid (2008) Kemahiran employability dalam kalangan mahasiswa dan pensyarah: perbandingan dengan industri. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18 Ogos 2008, Hotel Mahkota, Melaka.

Mohd Salleh, Kahirol and Rosli, Nurhasliza and Sulaiman, Nor Lisa and Ibrahim, Badaruddin and Mustafa, Mohamad Zaid (2008) Kesesuaian kerjaya dalam bidang keguruan dengan big-five personality bagi pelajar Pendidikan Teknikal di Malaysia. In: The 6th International Malaysian Studies Conference (MSC6), 5-7 August 2008, Kuching, Sarawak.

Mohd Salleh , Mohd Rezal (2008) The concrete structure remedial assessments in marine environment from whole life asset management perspectives. Masters thesis, University of Leeds.

Mohd Zin, Nur Shaylinda and Awang Maliki, Awang Fadlee and Zainal Abidin, Mohd Hazreek and Ahmad, Nor Aliza (2008) The ability of electricity to treat dairy waste. In: 2nd Regional Engineering Conference 2008 (EnCon 2008), 18-19 December 2008, Kuching, Sarawak, Malaysia.

Mohid, Zazuli (2008) Evaluation of glass welding by ultrashort pulse laser. Masters thesis, Okayama University.

Mohideen, Mohd Faizal and Md Seri, Suzairin and Kumar, Vinod and Raghavan, Vijay R. (2008) Experimental studies on a swirling fluidized bed with annular distributor. In: International Conference on Plant Equipment and Reliability, 27-28 March 2008, Selangor.

Mohideen Batcha, Mohd Faizal and Hussin, Amer Isyraqi and Raghavan, Vijay R. (2008) Engine cylinder head cooling enhancement by mist cooling – a simulation study. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) : 21-23 May 200, Johor Baharu. Universiti Tun Hussein Onn Malaysia, Universiti Tun Hussein Onn Malaysia, Batu Pahat, pp. 1-5. ISBN 9789832963592

Mohmad Zakuan @ Zakwan, Norhayati and Yusof, S.M and Shamsudin, S and Laosirihongthong, T. (2008) Reflective review of relationship between total quality management and organizational performance. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME2008) : 21-23 May 200, Johor Baharu. Universiti Tun Hussein Onn Malaysia, Batu Pahat. ISBN 9789832963592

Muhamad, Mohamad Zamri (2008) Kajian terhadap nilai ETOS melalui komunikasi pedagogi pensyarah di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mukahar, Nordiana and Ruslan, Siti Hawa and Mat Jubadi, Warsuzarina (2008) Operational transconductance amplifier design for a 16-bit pipelined ADC. In: 2nd Regional Engineering Conference 2008 (EnCon 2008), 18-19 December 2008, Kuching, Sarawak.

Musa, Nurliana (2008) Model pembelajaran berasaskan kaedah penyelesaian masalah ke atas pelajar berbeza gaya kognitif dan kemahiran logik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Mohamad Zaid and Mohd Nor, Nordiana and Mohd Salleh, Kahirol and Madar, Ahmad Rizal and Ibrahim, Badaruddin and Sulaiman, Norlisa and Razzaq , Abdul Rashid (2008) Pelaksanaan modul soft skills di Politeknik Kementerian Pengajian Tinggi Malaysia. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18 Ogos 2008, Hotel Mahkota, Melaka.

Mustafa, Mohamad Zaid and Suradin, Ali and Ibrahim, Badaruddin and Mastor, Sufian and Mohd Salleh, Kahirol and Madar, Ahmad Rizal and Sulaiman, Nor Lisa (2008) Penguasaan kemahiran berpasukan menerusi penyertaan di dalam kokurikulum: satu tinjauan di Universiti Tun Hussein Onn Malaysia. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Mustaffa, Mohamad Zaid and Suradin, Ali and Abdul Rashid, Faizah Hani and Mohd Salleh, Kahirol and Sulaiman, Nor Lisa and Ibrahim, Badaruddin (2008) Pendekatan model Item Response Theory (IRT) dalam peperiksaan menggunakan komputer dalam kalangan pensyarah UTHM. In: Seminar Pendekatan model Item Response Theory (IRT) dalam Peperiksaan Menggunakan Komputer dalam Kalangan Pensyarah UTHM, 2008, Science University of Malaysia.

Mustapa, Mohammad Sukri and M. , Jayaprakash and Y. , Mutoh and T. , Sadasue (2008) In-situ observation of fatigue crack growth behavior of microstructure controlled steel. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 Mei 2008, Johor Bahru, Johor, Malaysia.

Muuti, Nasrul Azhan and Mohamed Amin, Mohamad Khairani and Amin, Mohd Arif (2008) Kajian tinjauan amalan kerja di kalangan juruteknik dengan polisi MS ISO 9001:2000 di makmal kejuruteraan, UTHM: tinjauan dari sudut prosedur pengoperasian penyelenggaraan dan kalibrasi. In: Regional Conference on Human Resource Development (RESERD 08), 14-16 January 2008, Primula Beach Resort, Terengganu.

N

N.A., Badroldin and Abdul Latiff, Ab Aziz and Abd Karim, Ahmad Tarmizi and M.A. , Fulazzaky (2008) Palm oil mill effluent (pome) treatment using hybrid upflow anaerobic sludge blanket (huasb) reactors : impact on cod removal and organic loading rates. In: Engineering Postgraduate Conference (EPC), Bangi, Selangor.

Naan , Siti Nazha (2008) Glass ceiling factor wanita dalam membina kerjaya sebagai jurutera. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Naimullah, B.S. and Othman, Maisara and Rahman, A. K. and Sulaiman, S.I. and Ishak, S. and Hitam, S. and Aljunid, S.A. (2008) Comparison of wavelength propagation for free space optical communications. In: International Conference on Electronic Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Newman, S. T. and Nassehi, A. and Xu, X. W. and Rosso, R. S. U. and Wang, L. and Yusof, Yusri and Ali, L. and Liu, R. and Zheng, L. Y. and Kumar, S. and Vichare, P. and Dhokia, V. (2008) Strategic advantages of interoperability for global manufacturing using CNC technology. Robotics and Computer-Integrated Manufacturing, 24 (6). pp. 699-708. ISSN 0736-5845 (Unpublished)

Newman, S. T. and Nassehi, A. and Xu, X. W. and Rosso, R. S. U. and Wang, L. and Yusof, Yusri and Ali, L. and Liu, R. and Zheng, L. Y. and Kumar, S. and Vichare, P. and Dhokia, V. (2008) Strategic advantages of interoperability for global manufacturing using CNC technology. Robotics and Computer-Integrated Manufacturing, 24 (6). pp. 699-708. ISSN 0736-5845

Noranai, Zamri (2008) Study of energy efficiency opportunities in UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nordin, Shah Rul Anuar (2008) Isu-isu dalam Pengajian Islam Siri 1. Penerbit UTHM. ISBN 978-983-2963-58-5

O

Omar, Azhanie (2008) Penerapan nilai - nilai murni dalam kalangan pelajar sarjana muda pendidikan teknik dan vokasional semasa menjalankan amali di makmal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Omar, Badrul (2008) A fuzzy approach to support dfa evaluation of design concepts. PhD thesis, The University of Leeds.

Omar, Zainon and Esa, Ahmad (2008) Persepsi guru terhadap hubungan pihak sekolah dengan ibu bapa: proposal. In: Seminar Kebangsaan Pengurusan Pendidikan (PKPGB2008), 16 Oktober 2008, Universiti Tun Hussein Onn Malaysia.

Ong , Joo Hun (2008) Development of a genetic algorithm controller for cartesian robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Osman , Kahar and Sanudin, Rahmat (2008) Gate length effect on nmos electrical characteristics using tcad tools. In: Engineering Postgraduate Conference (EPC), Bangi, Selangor.

Othman, Hussain (2008) Unveiling the concept of man and universe in the classical Malay Islamic texts using Izutsu's approach. In: International Conference on Contemporary Scholarship on Islam: Japanese Contribution to Islam Studies: The Legacy of Toshihiko Izutsu (ICONSIST), 5-7 August 2008, International Islamic University Malaysia (IIUM).

Othman, Hussain and Mohd Salleh, Berhannudin and Syed Abdullah, Syed Muhammad Dawilah al-Edrus and Sulaiman , Abdullah (2008) Perlaksanaan pendekatan pembelajaran berasaskan pengalaman (PBL dan POPBL) bagi meningkatkan kemahiran insaniah pelajar. In: Seminar Kebangsaan Kemahiran Insaniah dan Kesejahteraan Sosial (SKIKS) 2008, 18-19 Ogos, 2008, Hotel Mahkota, Melaka.

Othman, Maisara and Rejab, M.F.M and Talib, R. and Cholan, N.A. and Abdullah, M.F.L. and Aljunid, S.A. and Abdullah, M.K. (2008) Comparison of detection techniques in optical cdma access network for point to multipoint configuration. In: International Conference on Electronic Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Othman, Maisara and Cholan , Noran Azizan and Talib, Rahmat and Baharudin, Elfarizanis and Rejab, M. F. M. and Aljunid, S. A. and Abdullah, M. K. (2008) Improve the signal to noise ratio using and subtraction technique in optical CDMA. In: IASTED Asian Conference on Communication Systems and Networks, 2-4 April 2008, Langkawi, Malaysia.

Othman, Maisara and Rejab, M.F.M. and Talib, Rahmat and Cholan , Noran Azizan and Abdullah, Mohamad Faiz Liew and Aljunid, S.A. and Abdullah, M. K. (2008) Comparison of detection techniques in optical CDMA Access Network for point to multipoint configuration. In: International Conference on Electronic Design , 1 - 3 December 2008, Penang, Malaysia.

Othman, Safiah and A. Wahab, Abas and Raghavan, Vijay R. (2008) Numerical study of the plenum chamber of a swirling fluidized bed. In: Proceedings of International Conference on Mechanical & Manufacturing Engineering (ICME2008), 21-23 May 2008, Johor Bahru, Malaysia.

Othman , Mohd Hilmi (2008) Injection moulding and thermal properties of polypropylene hinges. Masters thesis, Loughborough University.

Othman , Wan Zulkarnain (2008) Improvement of screw press production in palm oil using fuzzy logic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

P

P. Saminathan, Kantan (2008) Computational intelligence method for optimal rotary design system. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Paimin, Aini Nazura and Hashim, Mohd Noor and Mohd Noor, Mohd Shahril and Mustapha, Muhammad (2008) Penguasaan kemahiran pemesinan Computer Numerical Control (CNC) dalam kalangan pelajar diploma di Politeknik dan Institusi Kemahiran di Malaysia. In: National Conference on Skills and Competencies in Education, 16 February 2008, Science University of Malaysia.

Paisan, Mohd Farhan 'Uzair (2008) Tinjauan terhadap kemurungan dalam kalangan pelajar di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Phang, Chang and Phang, Piau (2008) Haar wavelet penyelesaian bagi masalah nilai sempadan. In: Seminar Kebangsaan Matematik & Masyarakat 2008, 13-14 Februari 2008, Kuala Terengganu .

R

R., Kasim and K., K. Alexander, and J., J. Hudson (2008) A choice of research strategy for identifying community-based action skill requirements in the process of delivering housing market renewal. PhD thesis, University of Salford.

Rahmat, Siti Nazahiyah and Md Ali, Zarina and Musa, Sabariah (2008) Treatment of rainwater quality using sand filter. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Ramin, Ahmad Kaseri and Ahmad, Abd Rahman (2008) Business process outsourcing adoption among the selected Malaysian government linked companies: motivation, barriers and drivers of outsourcing. In: Asia Pacific Conference on Management of Technology and Technology Entrepreneurship, 29 - 30 October 2008, Melaka.

Ramin, Ahmad Kaseri and Ahmad, Abd Rahman (2008) Business process outsourcing adoption among the selected Malaysian government linked companies: Motivation, Barriers and Drivers Of Outsourcing. In: International Accounting and Business Conference 2008, 18 - 19 August 2008., Johor Bahru, Johor..

Ramli , Azizul Azhar and Suhaimi, Nur Suhailin (2008) Expert system for oil-palm disease diagnosis(Peka-Sawit). In: Proceeding of 1st Regional Conference on Computational Science and Technology (RCCST-2007), Nov 2007, Kota Kinabalu, Malaysia.

Razak, Nor Rafidah (2008) Penerapan kemahiran insaniah melalui pembelajaran koperatif dalam mata pelajaran pengurusan kokurikulum di Fakulti Pendidikan Teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Muhammad Najib and Juanil, David Martin (2008) Internet business strategy: case study of property developers in Malaysia. In: The 14th Annual Conference of the Pacific Rim Real Estate Society, January 20 – 23, 2008, Istana Hotel, Kuala Lumpur, Malaysia.

Razali , Nor Faizah (2008) Effects of salt concentration on vapor-liquid equilibrium (VLE) of azeotropic mixture in ultrasonic distillation system. Masters thesis, Universiti Teknologi Malaysia.

Ridzuan, Mohd Baharudin and Abdul Latiff , Ab Aziz and Musa, Sabariah and Arshad , Jamalludin (2008) A study on a sulfate soil and acidic river occurance in Semberong River. In: 1st National Seminar on Environment, Development and Sustainability (PSISenviro2008), 28-29 July 2008, Selangor, Malaysia.

Ridzuan , Mohd Baharudin and Mustapha, Shahabuddin and Mohd Masirin , Mohd Idrus (2008) Water quality improvement of Sungai Kenawar Segamat (Prototype Test Site) using Eco Bio Block (EBB). In: 1st National Seminar on Environment, Development and Sustainability (PSISenviro2008), 28-29 July 2008, Selangor, Malaysia.

Robani, Rafidah and Chee, Ming Chan (2008) Unconfined compressive strength of clay stabilized with cement-rubber chips. In: Seminar on Unconfined compressive strength of clay stabilized with cement-rubber chips, 2008, UTHM.

Rusiman, Mohd Saifullah and Adnan, Robiah and Nasibov, Efendi N. (2008) The 3d fcrm modeling in miles per gallon of cars. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December 2008, Universiti Teknologi Malaysia, Skudai Campus, Johor Bahru, Malaysia .

Ruslee, Ruslinda (2008) Anti - swing control strategy for automatic 3 DOR crane system using FLC. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Salustiano Dos Reis , Piedade (2008) Failure analysis of a superheater tube of a coal-fired power plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samin , Reza Ezuan and Ramli , Mohd Syakirin and Ahmad, Mohd Ashraf (2008) Performance comparison of pd-type fuzzy logic controller of USBM simplified model. In: The 2nd International Power Engineering and Optimization Conference (PEOCO2008) , 4-5 June 2008, Shah Alam, Selangor, Malaysia.

Sani, Winardi and Hasnan, Khalid (2008) UTHM biodiesel pilot plant development. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Johor Bahru.

Sanudin, Rahmat and Morsin, Marlia and Sulong, Muhammad Suhaimi (2008) Structure design challenge in nano-cmos device. In: International Conference on Electronic Design (ICED 2008), 1 - 3 December 2008, Penang, Malaysia.

Senan, Norhalina and A.Hamid, Rahayu and Gan , Hui Do (2008) Online children anthropometry checking and immunization information system. In: 4th International Conference on Information Technology and Multimedia (ICIMU' 2008), Malaysia, 17-19 November 2008, Universiti Tenaga Nasional (UNITEN).

Shafie, Zakiah (2008) Mengenal pasti tahap pengetahuan pelajar tahun akhir Ijazah Sarjana Muda Kejuruteraan di KUiTTHO dalam bidang keusahawanan dari aspek pengurusan modal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Shamsudin, Shazarel and Chang , Chia Chze and Mohideen Batcha, Mohd Faizal (2008) The influence of EDM parameters when micro-hole drilling of tungsten carbide. In: Engineering Postgraduate Conference (EPC), Bangi, Selangor.

Singh, Sarvinder and Esa, Ahmad (2008) Kepimpinan dalam menghadapi isu-isu semasa pendidikan. In: Seminar Kebangsaan Pengurusan Pendidikan (PKPGB2008), 16 Oktober 2008, Universiti Tun Hussein Onn Malaysia.

Siswanto, Waluyo Adi (2008) Principles of engineering dynamics: concise theory and applications. Penerbit UTHM. ISBN 978-983-2963-76-9

Sudin, Nor’aisah and Abu Bakar, Mohd Zeid and Abd Wahab, Mohd Helmy (2008) Digital household energy meter. In: 2nd Engineering Conference on Sustainable Engineering Infrastructures Development & Management (EnCon 2008), 18-19 December 2008, Kuching, Sarawak.

Sulaiman, Noralfishah and David, Baldry and Les, Ruddock (2008) Care practice in residential care homes for the elderly (RCHE): the application of visual method using computer-assisted qualitative data analysis software (CAQDAS): NVivo 7.0. In: BUHU 8th International Postgraduate Research Conference, 26 June 2008, The Czech Technical University in Prague (CVUT), Czech Republic.

Sulaiman, Noralfishah and David, Baldry and Les, Ruddock (2008) The development of facilities management education in Malaysia: Universiti Tun Hussein Onn Malaysia (UTHM). In: BUHU 8th International Postgraduate Research Conference, 26 June 2008, The Czech Technical University in Prague (CVUT), Czech Republic.

Sulaiman, Noralfishah and David, Baldry and Leslie, Ruddock (2008) Multiple sources of evidence using a case study methodology. In: The UK - Ireland Planning Research Conference 2008, 18 March 2008, Queen's University Belfast.

Sulaiman, Noralfishah and Mat Radzuan, Indera Syahrul and David , Baldry and Les , Ruddock (2008) Opportunities for the transfer of United Kingdom (UK) best practices for the provision of homes for the elderly in Malaysia. In: 3rd International Conference on Interdisciplinary Social Sciences, 22-25 July 2008, Monash University Centre, Prato, Tuscany, Italy.

Sulong, Muhammad Suhaimi and Jamry, Asyiatul Asyikin and Shuib, Siti Maryaton Shuadah and Sanudin, Rahmat and Morsin, Marlia and Sahdan, Mohd Zainizan (2008) Process and device simulation of 80nm CMOS inverter using Sentaurus Synopsys TCAD. In: FEIIC Symposium on Engineering and Technology, 15-16 December 2008, Kuching, Sarawak.

Sulong, Muhammad Suhaimi and Mohd. Faiz, Nor Sofurah and Mohd Nasir, Mohamad Hamka and Yaakob@ Mohamed, Maziana (2008) Improving health education: an investigation on VOC in UTHM libraries. In: Actes de la Conférence Internationale Éducation, Économie et Société, 17-19 July 2008, Paris.

T

Tahar, Mohd Salleh (2008) Rekabentuk pengajaran kejuruteraan menggunakan realiti teknologi ( sistem TPU ) satu terjemahan konsep pengajaran visual dan kinestetik. In: Seminar Kebangsaan Jawatakuasa Penyelarasan Pendidikan Guru (JPPG 2008), 13-15 December 2008, Bayview Hotel, Langkawi, Malaysia.

Tan, Wee Choon (2008) Characteristics of plates embedded with shape memory alloy wires. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tasmin, Rosmaini and Woods, Peter (2008) Knowledge management and innovation in Peninsular Malaysia. In: Transfering, managing and maintaining knowledge for nation capacity development : Proceedings on Knowledge Management International Conference 2008 (KMICE 2008). Universiti Utara Malaysia, Sintok, pp. 158-164. ISBN 9789833827732

Tee, Swee Yin (2008) Energy efficient building:the application of thermal energy storage (TES) for cooling load reduction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Timyati, Firdaus @ Nukha (2008) Designing of an operational amplifier. Masters thesis, Universiti Tun HUssein Onn Malaysia.

Tjahjanto, Dwi and Musa, Sabariah and Ridzuan, Mohd Baharudin (2008) A study on artificial recharge well as a part of drainage system and water supply in UTHM. In: Proceedings 1st National Seminar on Environment, Development and Sustainability (PSISenviro2008), 28-29 July 2008, Selangor, Malaysia.

Tukiran, Zarina and Fuad, Norfaiza and Mohamad, Shamsul and Isa, Khalid and Mohd. Muji, Siti Zarina and Jumaat, Siti Amely and Ahmad, Ida Laila and Mohamed, Masnani and Jalani , Jamaludin (2008) Penerapan kemahiran insaniah melalui program pertandingan ALTERA® UP-1 Board. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan 2008, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Tukiran, Zarina and Abd Wahab, Mohd Helmy and Md Taujuddin, Nik Shahidah Afifi (2008) Pencerobohan maklumat melalui kejuruteraan sosial. In: MyEduSec Seminar 2008.

Turnad L. , Ginta and A.K.M. , Nurul Amin and A.N.M , Karim and Anayet U., Patwari and Lajis, Mohd Amri (2008) Tool wear morphology and chip segmentation in end milling titanium alloy Ti–6Al–4V. In: CUTSE International Conference 2008, 24-27 November 2008, Miri, Sarawak.

W

Wahab, Md Saidin (2008) Selective laser sintering of polymer nanocomposites. PhD thesis, The University of Leeds.

Wahab, Md Saidin and Dalgarno, K.W. and Cochrane, R. F. (2008) Processing and properties of PA6/MMT clay nanocomposites produced using selective laser sintering. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Wahid, Norfaradilla (2008) Code clone detection using string based tree matching technique. Masters thesis, Universiti Teknologi Malaysia.

Wahida Mohamed, Siti Farah (2008) Sistem mentoring dalam penyeliaan Projek Sarjana. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ahmad , Wan Nurul Karimah (2008) Quality management maturity and its relationship with human resource development strategies in manufacturing industry. Masters thesis, Universiti Putra Malaysia.

Wan Hashim, Wan Aishah and Mohd Masirin, Mohd Idrus (2008) Site investigation as a geotechnical forensic tool for road embankment performance evaluation. In: Engineering Postgraduate Conference (EPC), Bangi, Selangor.

Wan Yusoff, Wan Zahari and Ismail, Maziah (2008) Fm-servqual: A new approach of service quality measurement framework in local authorities. Journal of Corporate Real Estate, 10 (2).

Wan Yusoff, Wan Zahari (2008) Menilai kualiti perkhidmatan pihak berkuasa tempatan menggunakan instrumen FM-SERVQUAL. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Wong, Kah Leong and Mahmood, Md Tahir and Mohd Yassin, Airil Yasreen and Shek , Poi Ngian and Tan , Cher Siang (2008) Analytical study on pad footing foundation design using cold-formed steel lipped channel section. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Wong, F.R. and Sharif, S. and Kamdani, Kamaruddin and Abd. Rahim , Erween (2008) The effect of drill point geometry and drilling technique on tool life when drilling titanium alloy, Ti-6Al-4V. In: International Conference on Mechanical and Manufacturing Engineering 2008 (ICME 2008), 21-23 May 2008, Puteri Pacific Johor Bahru, Johor, Malaysia.

Y

Yaacob, Mohd Asmedi and Yasak, Zurina (2008) Pengaruh penginapan ke atas disiplin pelajar di Universiti Tun Hussein Onn Malaysia. In: Persidangan Pembangunan Pelajar Peringkat Kebangsaan, 22-23 Oktober 2008, Universiti Teknologi Malaysia.

Yaacob, Mohd Asmedi (2008) Pengaruh penginapan ke atas disiplin pelajar di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yasrif Ananda, M. and Sharif, J. M. and Ngadi, M. A. and Mohammad, Dzulkifli and Abdul Jamil, M.Mahadi (2008) A similarity of sobel and prewitt edge detection for cell counting simulation of human blood cells using MATLAB. In: International Graduate on Engineering and Science (IGCES'08), 23-24 December, 2008, Universiti Teknologi Malaysia, Sekudai, Johor.

Yeoh, David (2008) Timber-concrete composite connections and beams. In: 7th FIB Ph.D. Symposium. , 11-13 September 2008, Stuttgart, Germany.

Yeoh, David and Fragiacomo, Massimo and Abd Ghafar, Nor Hayati and Buchanan, Andy and Deam, Bruce and Crews, Keith (2008) LVL-concrete composite floor systems: an effective solution for multi-storey timber buildings. In: Australasian Structural Engineering Conference. , 26-27 June 2008, Melbourne, Australia.

Yeoh, David and Fragiacomo, Massimo and Aldi, Pietro and Mazzilli, Marta and Kuhlmann, Ulrike (2008) Performance of notched coach screw connection for timber-concrete composite floor system. In: 10th World Conference on Timber Engineering. , 2-5 June 2008, Miyazaki, Japan.

Yeoh, David and Fragiacomo, Massimo and Buchanan, Andy and Crews , Keith and Haskell, Jenny and Deam, Bruce (2008) Development of semi-prefabricated timber-concrete composite floors in Australasia. In: 10th World Conference on Timber Engineering. , 2-5 June 2008, Miyazaki, Japan.

Yusof , Hanita (2008) Three-dimensional plant modeling and simulation : how far does recent computer technology expand to assist the landscape architecture practice. Masters thesis, University of New South Wales.

Z

Z. , Ahmad and Z. , Ujang and A. A. , Abdul Latiff and N.I. , Ahmat Nor (2008) Effect on membrane fouling and cake resistance in a hybrid membrane bioreactor for palm oil mill effluent treatment. In: International Conference on Environment (ICENV2008), 15-17 Disember 2008, Pulau Pinang.

Zahari, Zafrah and Abdul Latiff, Ab Aziz and Fulazzaky, Mohd Ali and Tjahjanto, Dwi (2008) Parit Ngamarto drainage effects on bekok river water quality. In: Engineering Postgraduate Conference (EPC), Bangi, Selangor.

Zainal Abidin, Norazlin (2008) Kesan penggunaan peta konsep ke atas pencapaian mata pelajaran rekabentuk sistem dalam kalangan pelajar program Ijazah Sarjana Muda Teknologi Maklumat dan Multimedia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin , Ramlan and Esa, Ahmad and Wan Ahmad, Wan Mohd Rashid (2008) Pendidikan sepanjang hayat: isu, cabaran dan peranan sekolah membangun modal insan dalam komuniti setempat. In: Seminar Kebangsaan Pengurusan Pendidikan (PKPGB2008), 16 Oktober 2008, Universiti Tun Hussein Onn Malaysia.

Zawawi , Mukmin (2008) Alarm design for scada system of assembly cell-200 trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Shamsul Aizam and Ahmad, Md Zarafi and Hamdan, Rohaiza and Luxman, Andrea (2008) Forecasting load demand using ERACS. In: The 2nd International Power Engineering and Optimization Conference (PEOCO2008) , 4-5 June 2008, Shah Alam, Selangor, Malaysia.

Zulkifli, Shamsul Aizam and Kok , Boon Ching and Ahmad, Md Zarafi and Hamdan, Rohaiza and Ibrahim, Nur Aliaa (2008) Study of poles and zeros arrangement method for PID controller on TCSC. In: International Conference on Harmonics and Quality of Power (ICHQP 2008), 28 September - 1 October 2008, New South Wales , Australia.

This list was generated on Thu Apr 27 22:50:58 2017 MYT.