Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2020

A

A. Sharum, M. S. and Mansur, M. N. and Abdul Patar, M. A. and Nasir, Nurul Fitriah (2020) Design and fabrication of biodiesel mixer for the compatibility study of biodiesel blends with automotive part material. Fuel, Mixture Formation and Combustion Process, 2 (1). pp. 1-6. ISSN 2672-7331

Abbas, Mohammed Abdulridha (2020) Influence of agglomeration phenomenon in machining of AISI D2 hardened steel using nano chromium powder mixed-EDM. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Hanif and Zaman, Izzuddin and Yahya, Musli Nizam and Sambu, Mathan and Meng, Qingshi (2020) Analysis on sound absorber panel made of oil palm Mesocarp Fibre using Delany-Bazley and Johnson-Champoux-Allard models. International Journal of Nanoelectronics and Materials, 13. pp. 393-406. ISSN 1985-5761

Abdul Patar, Mohd Affifudin (2020) Eggshell catalyst assisted palm biodiesel production for blending of B10 blended diesel fuel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Patar, Mohd Affifudin and Nasir, Nurul Fitriah and Osman, Shahrul Azmir (2020) Green calcium catalyst for biodiesel production: a review. Technology Reports of Kansai University, 62 (10). pp. 6227-6242. ISSN 0453-2199

Abdul Patar, Mohd Affifudin and Nasir, Nurul Fitriah and Osman, Shahrul Azmir and Mat Isa, Norasikin (2020) Optimization of Calcination Temperature of Eggshell Catalyst and Palm Oil Biodiesel Production for Blending of B10 Petroleum Diesel Fuel. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 69 (2). pp. 60-72. ISSN 2289-7879

Abdul Rahman, Muhammad Faisal and Kamarudin, Kamarul Azhar and Dahlan, Hendery and Mohamed Hattab, Mohamed Nasrul (2020) Ballistic limit prediction on nacre shell using numerical simulation approach. Advanced Research in Natural Fibers, 2 (1). pp. 25-29. ISSN 2682-7409

Abdullah, Abdullah I. and Mat Isa, Norasikin and Nemah, Mohammed Najeh and Fakhri, O M and Kareem, A. K. (2020) A hybrid haptic stimulation wearable device to recover the missing sensation of the upper extremity prostheses’ users. Technology Reports of Kansai University, 62 (9). pp. 4949-4972. ISSN 0453-2199

Abdullah, Aslam (2020) On three classes of mesh for the solution of a singularly perturbed two-point boundary value problem. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 115-132. ISBN 978-967-2916-56-7

Abdullah, Haslina and Zaman, Nizam Nurehsan and Talib, Norfazillah and Lee, Woon Kiow and Saleh, Aslinda and Zakaria, Mohamad Shukri (2020) Minimization of tool path length of drilling process using particle swarm optimization (PSO). In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 48-56. ISBN 978-967-2389-56-9

Abdullah, Hussin and Mohd Nor, Mohd Khir and Abdul Hamid, Mohd. Noor and Abd Rahman, Norashidah and Kasmuin, Mohd Zaheruddin and Che Pa, Faizul and Ibrahim, Abdul Haqi and Kelewon, Nor Azila (2020) Kemahiran insaniah dalam kursus kokurikulum. In: Kokurikulum dan Pembangunan Mahasiswa Holistik. Penerbit UMK, pp. 39-70. ISBN 978-967-2226-56-7

Abobaker, Mostafa and M. Elfaghi, Abdulhafid and Addeep, Sogair (2020) Numerical study of wind-tunnel wall effects on lift and drag characteristics of NACA 0012 airfoil. CFD Letters, 12 (11). pp. 72-82. ISSN 2180-1363

Achmad, Zainun and Ismail, Al Emran (2020) Experimental study of fatigue age on SUP-9 leaf spring steel which received heat treatment and shot peening processes. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 1-15. ISBN 978-967-2916-56-7

Al-Ghriybah, Mohanad (2020) Aerodynamic performance evaluation of multi inner blades savonius rotor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al-Juhais, Lafta Flayih Muhsin and Mas, Fawzi and Mohammad, Hafidh Hassan (2020) Numerical study on heat transfer enhancement in a curved channel with baffles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 72-83. ISSN 2289-7879

Ali Memon, Danish (2020) The impact of safety culture towards safety performance with mediator of ISO9001 and OSH Administration. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Mohd Fairuz and Mustapa, Mohammad Sukri and Yusof, Yusri (2020) The primary study of peat soil in wood plastic composite. International Journal of Advanced Science and Technology, 29 (5). pp. 1251-1257. ISSN 2005-4238

Amat Azman, Putera Mohamad Adam (2020) Effect of start injection toward combustion, performances and emision characteristic of B20 biodiesel fuel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aminnuddin, Hazim Fadli and Ismail, Farzad and Mohammed, Akmal Nizam and Abdullah, Kamil (2020) The effect of grid skewness on non-unified compact residual distribution methods for scalar advection diffusion problems. CFD Letters, 12 (3). pp. 58-65. ISSN 2180-1363

Amirnordin, Shahrin Hisham (2020) Effects of multi-circular jet plates on the spray and flame characteristics of internal mixing air-assisted atomizer. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Amirnordin, Shahrin Hisham and Sahari, M.F. and Khalid, Amir and Ahmad Shaffie, Muhammad Elyas Muiz and Muhammad Usman, Abdullahi (2020) Study the spray characteristic and mixture of diesel-water compare with biodiesel on fractal grid turbulence generated using schlieren method in burner system. Fuel, Mixture Formation and Combustion Process, 2 (1). pp. 1-7. ISSN 2672-7331

Ariffin, Ahmad Hamdan and Yaakub, Mohd Fauzi (2020) A review on aviation restructuring action to survive in COVID-19 challenges: Malaysia perspective. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 16-26. ISBN 978-967-2916-56-7

Azman, Naqibah and Muhd Nor, Nik Hisyamudin and Hassan, Mohd Fahrul and Burhan, Mohd Hafiz and Muhd Muji, Siti Zarina and Mohamad, Fariza and Mohd Turan, Faiz and Bahasa, Abdul Rahman and Seiji, Yokoyama (2020) Industrial guideline for injection moulding : case of jaundice meter. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 299-303. ISSN 2278-3091

B

Baharudin, Muhammad Azzrul Ashraff and Didane, Djamal Hissein and Batcha, Mohd Faizal Mohideen and Abdullah, Kamil and Mohammed, Akmal Nizam and ., Mas Fawzi (2020) CFD simulation study of multistage vertical axis wind turbine (VAWT). In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 47-60. ISBN 978-967-2916-56-7

C

Che Saad, Muhammad Adib and Mohideen Batcha, Mohd Faizal and Razali, Mohd Azahari and Abdul Rahman, Ramhuzaini and Ahmad Nazri, Mohd Ariff and Lam, Hong Yin and Ishak, Maizul and Yusop, Azli (2020) Development of an aquaponic system using ablution greywater for recreational purpose. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 61-73. ISBN 978-967-2916-56-7

Chi Adam, Mohd Khairil Anbia (2020) Development of open platform controller for step-NC compliant CNC system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Desmond Daniel Vui Sheng (2020) Development of biodegradable composite micro-perforated panel made from natural fibre composites with evaluation of its acoustic and mechanical properties. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chua, Bing Liang and Mohammed, Akmal Nizam and Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohd Yusof, Nurul Farhana (2020) Numerical simulation of aerofoil with flow injection at the upper surface. CFD Letters, 12 (1). pp. 98-110. ISSN 2180-1363

Chung, S. M. and Koh, C. T. (2020) Effects of microstructure architecture on the fracture of fibrous materials. The International Journal of Integrated Engineering, 12 (1). pp. 138-143. ISSN 2229-838X

D

Didane, Djamal Hissein and Saipul Anuar, Muhammad Amir Zafran and Mohideen Batcha, Mohd Faizal and Abdullah, Kamil and Mohd Ali, Mas Fawzi and Mohammed, Akmal Nizam (2020) Simulation study on the performance of a counter-rotating savonius vertical axis wind turbine. CFD Letters, 12 (4). pp. 1-11. ISSN 2180-1363

H

Hazman, Nurhazwani and Mat Isa, Norasikin and Nasir, Nurul Fitriah and Mohd Yunos, Siti Nur Mariani (2020) Effect of air flow rate on the emission of burning coconut shell for biofuel product. Technology Reports of Kansai University, 62 (9). pp. 5829-5838. ISSN 0453-2198

I

Ibrahim, Mohd Halim Irwan and Kamarudin, Nurhafizah (2020) Green strength optimization of injection molding proces for novel recycle binder system using Taguchi method. International Journal of Integrated Engineering, 12 (4). pp. 182-190. ISSN 2229-838X

Isa, Noor Amira and Ahmad Bareduan, Salleh (2020) Methodology to develop bottleneck-based heuristic for permutation flow shop scheduling. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 98-114. ISBN 978-967-2916-56-7

Ishak, Nazrul Iszhar (2020) Performance evaluation of semi-automated filling machine for “Otak-Otak” Production. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Iman Fitri and Adnan, Alif Izzani Zainol and Mohammed Qaid Al-Mekhlafi, Abdulrahman and Mahmoud Abdelkarim Mohamed, Belal Abdelkarim and Nasir, Nurul Fitriah and Hariri, Azian and Mat Isa, Norasikin (2020) Indoor air quality (IAQ) in educational institutions: a review on risks of poor IAQ, sampling strategies, and building-related health symptoms. Journal of Safety, Health and Ergonomics, 2 (1). pp. 1-9. ISSN 2682-745X

Ismail, Muammar Mukhsin and Mas, Fawzi and Theerayut, Leevijit and Zulkifli, Fathul Hakim and Osman, Shahrul Azmir and Taweekun, Juntakan (2020) Energy consumption and emissions of diesel-CNG dual fuel engine at high load operation. The International Journal of Integrated Engineering, 12 (2). pp. 253-260. ISSN 2229-838X

Ismail, Suhairi and Mohammad Noor, Hafsa and Kamaruddin, Syamsul Azrin and Mohammad Sauti, Muhammad Amir Aiman and Abdul Halim, Muhammad Hazim and Ismail, Muhammad Fikri Syazani (2020) Pembersih bilah kipas siling. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 19-36. ISBN 978-967-2389-80-4

Ismail, Suhairi and Mohammad Noor, Hafsa and Omar, Amin Shah and Benmahfouz Azhar, Aisyah Azhar and Zainuddin, Nurul Hidayah Natasha and Raman, Nurulnastashah (2020) Alat pengutip buah. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 61-78. ISBN 978-967-2389-80-4

Ismail, Suhairi and Yahya, Mohd Shahir and Janon, Mohd Najib and Abdul Mutalib, Mohammad Asyraf Safwan and Rosnizam, Nurshafawati and Abdul Aziz, Nuraini (2020) Troli tong gas. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 93-104. ISBN 978-967-2389-80-4

J

Jaidi, Zolhafizi (2020) The effect of alloying element in lead-free solders on intermetallics growth with enimag surface finish. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamil Hosni, Nor Ain (2020) Effect of chromium (cr) particle size and span-20 surfactant on Aisi d2 hardened steel using electrical discharge machining. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

K

K. Ajeel, Raheem and W. Salim, W.S-I. and Hasnan, Khalid (2020) Numerical investigations of heat transfer enhancement in a house shapedcorrugated channel: combination of nanofluid and geometrical parameters. Thermal Science and Engineering Progress, 17. pp. 1-14. ISSN 2451-9049

Kaharuddin, Muhammad Zulhilmi (2020) Duplex camera portable motion capture system for single athlete’s performance analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Kamarul-Azhar and Mohd Nor, Mohd Khir and Ismail, Al Emran and Abdul Hamid, Iskandar and Abdullah, Ahmad Sufian (2020) Progressive damage modeling of synthetic fiber polymer composites under ballistic impact. In: Modelling of Damage Processes in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Elsevier Ltd., pp. 115-132. ISBN 9780081022979

Kamarudin, Mohamad Saddam (2020) Characterization of graphite polyurethanes composite from renewable based oils. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamdi, Zakiah (2020) Plasma transfer arc welding (PTAW) for depositing tungsten carbide-nickel cermet coating for corrosion. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 145-163. ISBN 978-967-2916-56-7

Kareem, AK and Fakhri, OM and Ismail, Al Emran and Taib, I and Ali, IR and Nemah, MN (2020) Comparative computational study of mechanical behavior in self-expanding femoropopliteal stents. The International Journal of Integrated Engineering, 12 (1). pp. 210-224. ISSN 2229-838X

Kassim, Noraniah and Basharie, Siti Mariam and Fauzi, Muhamad Razizy and Abd Rashid, Muhamad Hazim and Mashuri, Muhammad Amirul Adli and Mohd Rizal, Muhammad Faisal (2020) Alat pemungut tandan kelapa sawit darjah kebebasan. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 105-114. ISBN 978-967-2389-80-4

Kassim, Noraniah and Janon, Mohd Najib and Mohamad, Mahmod Abd Hakim and Basharie, Siti Mariam and Kadis, Ghazali (2020) Alat pencungkil ubi kayu. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 37-46. ISBN 978-967-2389-80-4

Kuddus, Suriyanti (2020) Effect of silicon carbide (SiC) on mechanical and physical properties of solid state recycled aluminium aa6061 by using hot extrusion method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

L

Lee, Jia En and Wong, Shih Jye and Lee, Woon Kiow and Talib, Norfazillah and Ong, Pauline and Abdullah, Haslina and Saleh, Aslinda and Mat Hassan, Normunira and Abd Rashid, Razlin (2020) Review on the effect of ceramic reinforcements with different weight percentage and process parameters on the mechanical properties of aluminium metal matrix composite. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 28-38. ISBN 978-967-2389-56-9

Lee, Jun Xiong and Taib, Ishkrizat and Kamarudin, M. Saddam and Mohammad, Aswad and Asmuin, Norzelawati (2020) Heat distribution on abdominal aorta having aneurysm during hyperthermia therapeutic. Research Progress in Mechanical and Manufacturing Engineering, 1 (1). pp. 139-145. ISSN 2773-4765

Lee, Sen Tan and Zainuddin, Zarita and Ong, Pauline (2020) Wavelet neural networks based solutions for elliptic partial differential equations with improved butterfly optimization algorithm training. Applied Soft Computing Journal, 95. pp. 1-11. ISSN 1568-4946

Lim, Gim Huang and Nordin, Normayati and Lim, Chia Chun and Abdul Rahim, Nur Shafiqah and Mohamed Rasidi, Shamsuri and Shariff, Muhammad Zahid Firdaus (2020) Effect of turbulence intensity on turning diffuser performance at various angle of turns. CFD Letters, 12 (1). pp. 48-61. ISSN 2180-1363

M

M Elfaghi, Abdulhafid (2020) Higher order compact flowfield-dependent variation (HOC-FDV) method for one-dimensional viscous flow. In: Research Trends in Multidisciplinary Research and Development. Penerbit UTHM, pp. 57-79. ISBN 978-93-5335-627-9

M Elfaghi, Abdulhafid and Ajaj, Wisam B. and Afolabi, Lukmon Owolabi (2020) Effect of oil mass flow rate on temperature profile in oil wells. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 77 (2). pp. 23-32. ISSN 2289-7879

M. Halmi, M. A. and Harimon, M. A. and Chue, D. (2020) Effects of high velocity oxy-fuel coatings on the tensile properties of S50C steel. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 10 (2). pp. 1365-1384. ISSN 2249–6890

Madlan, Mohd Amran and Misaran, Mohd Suffian and Zaman, Izzuddin and Yahya, Musli Nizam and Ismon, Maznan and Kasron, Md Zainorin and Mohd Azahari, Muhammad Shafiq (2020) The effect of sound absorbing materials as sound absorber on train. Advanced Research in Natural Fibers, 2 (2). pp. 27-32.

Mahal, Sabah K. and Alimin, Ahmad J. (2020) Experimental investigation on a novel integrated solar chimney and liquid desiccant system for simultaneous power and fresh water generation. International Energy Journal, 20 (1). pp. 67-86. ISSN 1513718X

Mahdi, Ammar A M H and W Salim, W S I and M Farhan, Kahlan H (2020) Fuzzy model reference adaptive controller for position control of a DC linear actuator motor in a robotic vehicle driver. International Journal of Integrated Engineering, 12 (3). pp. 235-244. ISSN 2229-838X

Maksom, Mohammad Syahadan and Nasir, Nurul Fitriah and Asmuin, Norzelawati and Abd Rahman, Muhammad Faqhrurrazi and Khairulfuaad, Riyadhthusollehan (2020) Biodiesel composition effects on density and viscosity of diesel-biodiesel blend: a CFD study. CFD Letters, 12 (4). pp. 100-109. ISSN 2180-1363

Manshoor, Bukhari and Salleh, Hamidon and Hariri, Azian and Zaman, Izzuddin (2020) Thin film flow of non-newtonian third grade fluid down an inclined plane by variation of parameter method. Journal of Complex Flow, 1 (1). pp. 29-32. ISSN 2672-7374

Manshoor, Bukhari and Sapit, Azwan and Nordin, Normayati and Hariri, Azian and Salleh, Hamidon and Razali, Mohd Azahari and Zaman, Izzuddin and Khalid, Amir and Ghazali, Mohd Fairusham and Alsayed, Muneer Khalifa (2020) Simulation of fractal like branching microchannel network on rectangular heat sink for single phase flow. CFD Letters, 12 (2). pp. 69-79. ISSN 2180-1363

Manshoor, Bukhari and Zaman, Izzuddin and Khalid, Amir and Ghazali, M.F. and Khandelwal, Manish K. (2020) Effect of streamwise spacing on the sound generated by flow through two square cylinders in tandem arrangement. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1.1). pp. 534-541. ISSN 2278-3091

Mat Beyi, Abdul Fattah and Ismail, Al Emran and Taib, Ishkrizat and Ibrahim, Mohd Norihan (2020) Stent Classifications and Effect of Geometries on Stent Behaviour Using Finite Element Method. International Journal of Mechanical Engineering and Robotics Research, 9 (3). pp. 329-340. ISSN 2278-0149

Mat Hassan, Nik Normunira and M. Rus, Anika Zafiah and Saleh, Aslinda and Marsi, Noraini and Mohamed Yusop, Fatimah and Samiran, Norafzanizam and Sulong, Nurulsaidatulsyida and Tuan Ismal, Tuan Noor Hasanah and Mohammad Noor, Hafsa (2020) Mechanical characterization of ABS recyling based electric and electronic equipment (WEEE) by using injection molding. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 20-27. ISBN 978-967-2389-56-9

Mohamed, Nor Shamsiah (2020) Siam weed based hydrogel hybrid for tissue engineering. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Ubaidullah (2020) Development of a smart factory prototype in context of industry 4.0. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Ubaidullah (2020) Development of a smart factory prototype in context of industry 4.0. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Harun, Dalila (2020) Characterization of cyclic plasticity type wear mechanism for titanium alloy, TI-6AL-4V on reciprocating sliding wear test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Harun, Dalila and Thenan, Thamil and Ahmad Nordin, Nurani and Mohd Tobi, Abd Latif and Jamian, Saifulnizan and Marsi, Noraini (2020) Study the effect of sliding frequency on reciprocating sliding wear test for titanium alloy Ti-6Al-4V. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 12-19. ISBN 978-967-2389-56-9

Mohd Joharudin, Nurul Farahin and Abdul Latif, Noradila and Mustapa, Mohammad Sukri and Badarulzaman, Nur Azam and Supawi, Aiman (2020) Mechanical properties of AA7075 aluminium chip reinforced rice husk silica by solid state technique. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 74-97. ISBN 978-967-2916-56-7

Mohd Nor, M. K. and Ho, C. S. and Ma’at, N. and Kamarulzaman, M. F. (2020) Modelling shock waves in composite materials using generalised orthotropic pressure. Continuum Mechanics and Thermodynamics, 32. pp. 1217-1229. ISSN 0935-1175

Mohd Nor, Mohd Khir and Ho, C Sin and Janudin, Farah NA (2020) An experimental study on the deformation behaviour and fracture mode of recycled aluminium alloy AA6061-reinforced alumina oxide undergoing high-velocity impact. Journal of Mechanical Engineering Science. pp. 1-12. ISSN 0954-4062

Mohd Yusoff, Ainul Husna and Koh, Cheng Zhi and Ngadimon, Khairulnizam and Md Salleh, Salihatun (2020) Neural network algorithm-based fall detection modelling. The International Journal of Integrated Engineering, 12 (3). pp. 138-150. ISSN 2229-838X

Mohmad Jaat, Md Norrizam (2020) The effect of fuel injection pressure and in cylinder temperature on igniton delay, combustion performance and emission. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

N

Nawawi, Muhammad Amirul and Kamisan, Muhamad Nurul Fitri and Adam, Nur Farah Aqilah and Tuan Ibrahim, Tuan Mohd Hafeez and Ismail, Fadillah (2020) Car wash water recycling system. In: Innovative Product Design for Industrial Application. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-12-5

Nor Salim, Nor Adrian (2020) A study of water-mist recirculation system for filtration and cooling effect in the kitchen hood ventilation system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

O

O. Afolabia, Lukmon and M. A. Elfaghia, Abdulhafid and Didane, Djamal Hissein and Ismail, Al Emran and Mat Isa, Norasikin (2020) Assessment of thermal energy storage integrated solar thermal collector system: a review. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 27-46. ISBN 978-967-2916-56-7

Ong, Pauline and Chong, Chon Haow and Rahim, Mohammad Zulafif and Lee, Woon Kiow and Sia, Chee Kiong and Ahmad, Muhammad Ariff Haikal (2020) Intelligent approach for processmodelling and optimization on electrical dischargemachining of polycrystalline diamond. Journal of Intelligent Manufacturing, 31. pp. 227-247. ISSN 0956-5515

R

Rady, Mohammed Hussien and Mustapa, Mohammad Sukri and Wagiman, Abdullah and Shamsudin, Shazarel and Lajis, Mohd Amri and Sami Al Alimi2, Sami Al Alimi2 and Mansor, Mohamad Norani and Harimon, Mohd Azhar (2020) Effect of the heat treatment on mechanical and physical properties of direct recycled aluminium alloy (AA6061). International Journal of Integrated Engineering, 12 (3). pp. 82-89. ISSN 2229-838X

Raja Ahmad, Raja Puteri Nurul Adibah (2020) The influence of biosynthesis zinc oxide nanoparticles by using fruit extracts of ananas comosus towards the performance of PSF/ZNO membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Muhammad Faiz (2020) Development of obstacle detection and avoidance system based on integration of different based-sensor for small-sized unmanned aerial vehicle using cues from expansion of feature points and direction of flow field vectors. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Muhammad Faiz (2020) Development of obstacle detection and avoidance system based on integration of different based-sensor for small-sized unmanned aerial vehicle using cues from expansion of feature points and direction of flow field vectors. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Ahmad Hadi and Nordin, Normayati and Sapit, Azwan and Alias, Zainal Abidin (2020) Flow through various porosity of circle grid perforated plate with orifice plate flowmeter. Journal of Complex Flow, 2 (1). pp. 1-6. ISSN 2672-7374

Razali, Mohd Azahari and Madon, Rais Hanizam and Mohmad Ja'at, Md Norrizam and Sapit, Azwan and Salleh, Hamidon and Hushim, Mohd Faisal and Zaboon, Waseem Alwan and Samsubaha, Muhammad Fauzi (2020) Investigation of diesel injector flow pattern based on computer-aided design. CFD Letters, 12 (5). pp. 13-23. ISSN 2180-1363

S

Samsubaha, Muhammad Fauzi (2020) Acoustic excitation on flame properties caused by two sound sources. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Samsudin, Sheikh Saiful Azam and Shaari, Abdul Muin and Abdullah, Kamil and Mohideen Batcha, Mohd Faizal (2020) Potential of utilizing solar chimney as an energy efficiency measure in Malaysian hospitals. CFD Letters, 12 (4). pp. 90-99. ISSN 2180-1363

Sazali, Norsuhailizah (2020) Hydrothermal synthesis and characterization of zeolite from Malaysia’s natural kaolin for adsorption of sodium ion (NA+) from seawater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Segar, Ganaswaran (2020) Prevalence of musculoskeletal symptoms and ergonomic risk assessment among production workers in manufacturing industries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Selamat, Siti Norhana (2020) To develop a new mineral carbonation process that have a high efficiency in CO2 absorption into industry slag using low energy mechanical milling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Talib, Nihad Hasan (2020) Optimization of RFID network planning for monitoring railway mechanical defects based on gradient-based Cuckoo search algorithm. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Norfazillah and Nagarajan, Sugan and Lee, Woon Kiow and Saleh, Aslinda and Abdullah, Haslina (2020) Microstructure analysis of aluminium metal matrix alloy with silicon carbide and hexogonal boron nitride. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-56-9

Thiagarajan, Ganabpaty and Abdul Latif, Noradila and Mohd Joharudin, Nurul Farahin (2020) Preliminary study on crystallinity of rice husk ash reinforcement for metal matrix composite. Advanced Research in Natural Fibers, 2 (1). pp. 21-24. ISSN 2682-7410

Thomas, Muhammad Adrian (2020) Enhancement of image recognition in digital close-range photogrammetry using mathematical equations and camera calibration. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tiau, See Ping (2020) Prototype evaluation of a novel selective leverage gear system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ibrahim, Tuan Mohd Hafeez and Ab. Rahman, Rosdi and Ahmad, Muhammad Shukri and Sarif, Muhammad Iqmal and Mohd Zain, Muhamad Nazim and Saniman, Mohamad Shafiq (2020) Mesin pembungkus nasi lemak. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 1-18. ISBN 978-967-2389-80-4

Tuan Ibrahim, Tuan Mohd Hafeez and Ismail, Suhairi and Basharie, Siti Mariam and Abdul Rahman, Muhammad Qusyairi and Ahmad, Muhammad Shukri and Soo, Jun Chun and Osman, Muhammad Nur Fikri and Baskaran, Simresan (2020) Camera stabilizer. In: Innovative Product Design for Industrial Application. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-12-5

Tuan Ibrahim, Tuan Mohd Hafeez and Kadis, Ghazali and Othman, Khairulnizam and Mohamad Shokri, Muhammad Akmal and Khalid, Noor Fasya Fashihah and Nor Halim, Nur Hanani (2020) Mesin penyedut hampagas dwifungsi. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 79-92. ISBN 978-967-2389-80-4

Tukimon, Mohd Faizal (2020) Thermo properties of quaternary molten salt heat transfer fluid for heat recovery system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tze, Ching Ong and Buja, Andy and Ak MawanSia, Dino Sabastian and Chee, Kiong and Yee, See Khee and Ong, Pauline (2020) Simulation of various resonators as viscometer for engine oils. Journal of Social Sciences and Technical Education, 1 (1). pp. 2716-6740. ISSN 2716-6740

W

W Mahmud, Wan Muhammad Azlan (2020) PSO modelling and PID controlled of automatic fish feeder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Mohd Daniel and Mohamad, Zaleha (2020) Characterization of mechanical and physical properties of eggshell waste by using cold compaction. Advanced Research in Natural Fibers, 2 (1). pp. 1-4. ISSN 2682-7409

Y

Yahya, Mohd Shahir and Mohamad, Mahmod Abd Hakim and Kamaruddin, Syamsul Azrin and Mohd Nadzri, Muhammad Haziq Khairunnas and Razali, Nur Afiq and Mohd Suhaimin, Muhammad Syamil Hakim (2020) Khemah mangsa banjir patuh syariah. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 47-60. ISBN 978-967-2389-80-4

Yeoh, Kim Hao (2020) Heuristics method for truck disassembly process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Khairul Nazri (2020) Polysulfone mixed matrix membranes with biosynthesis nanoparticles: enhancement of interface compatibility and antibacterial membrane seperation process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zainal, Nur Saadah (2020) Characterization of amorphous silica and crystalline silica from rice husk ash on water filtration application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Nazri Huzaimi (2020) Physical and mechanical behaviors of pineapple leaf fibre reinforced thermoplastics corn starch bio polymer composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zaman, Izzuddin and Subramaniyan, S Kanna and Sanusi, Shahmir Hayyan and Azmir, Nor Azali and Manshoor, Bukhari and Khalid, Amir (2020) Materials selection analysis for vibration isolator pads. Advanced Research in Natural Fibers, 2 (1). pp. 15-20. ISSN 2682-7409