![Logo](/images/sitelogo_resized.png)
Items where Division is "Faculty of Electrical and Electronic Engineering > Department of Electrical Engineering" and Year is 2013
![]() | Up a level |
Thesis
A. Othman, Emad (2013) Improvement of routing protocol in wireless sensor network for energy consumption to maximize network lifetime. Masters thesis, Universiti Tun Hussein Malaysia.
A. Othman, Ibtesam (2013) Uplink channel power control improvement in DS-CDMA system using channel predictions. Masters thesis, Universiti Tun Hussein Malaysia.
Ab. Malek, Siti Nur Hidayah (2013) Design and development of wireless stethoscope with data logging functions. Masters thesis, Universiti Tun Hussein Malaysia.
Abd Aziz, Aizat (2013) PV boost converter conditioning using neural network. Masters thesis, Universiti Tun Hussein Malaysia.
Abd Halim, Hasmizar (2013) Three phase inverter development using common mode voltage pulse width modulation (PWM) method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abd Rashid, Wan Norhisyam (2013) Optimal load shedding for microgrids with limited DGS (Application in Perwaja Steel Sdn Bhd). Masters thesis, Universiti Tun Hussein Malaysia.
Abd. Rahman, Rais Rabani (2013) Analysis of non uniform surface current distribution on thick and thin wire antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abd. Rahman, Rais Rabani (2013) Analysis of non uniform surface current distribution on thick and thin wire antenna. Masters thesis, Universiti Tun Hussein Malaysia.
Abdul Rahim, Suraya (2013) Design and development of groove micromixer for laminar blood-reagent mixing. Masters thesis, Universiti Tun Hussein Malaysia.
Abdul Rahman, Mohd Ridzuan (2013) Microstrip bandpass filter using triangular patch resonator for wimax applications. Masters thesis, Universiti Tun Hussein Malaysia.
Abdull Kadir, Junaini (2013) Development of a boost convertor for photovoltaic system MPPT using fuzzy logic control. Masters thesis, Universiti Tun Hussein Malaysia.
Abdullah, Farisal (2013) Technique of failure analysis for gate oxide defect of Bi-polar CMOS Diffuse (BCD) technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdullah, Mohamad Syah Rizal (2013) Neural network controller design for position control system improvement. Masters thesis, Universiti Tun Hussein Malaysia.
Abdullah, Rasyidi (2013) Development of DC-DC converter for DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdullah, Rasyidi (2013) Development of DC-DC converter for DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Malaysia.
Abdurrahim, Mohamed Emhemed (2013) Analysis and evaluation of uncertainty for conducted and radiated emissions tests. Masters thesis, Universiti Tun Hussein Malaysia.
Ahmad, Abdull Zubi (2013) Characterization of the equatorial F2-region plasma drift using doppler interferometry at Parit Raja. Doctoral thesis, Universiti Tun Hussein Malaysia.
Ahmad, Mohd Hafiez (2013) A study of energy efficiency building lighting system design. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ahmad, Norhidayah (2013) Linear quadratic gaussian (LQG) controller for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.
Alashqer, Aws Zuheer Yonis (2013) Design and implementation of MIMO-long term evolution-advanced to support larger bandwidth. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.
Ali Saad, Ahmad Mabrook (2013) Dual-band microstrip loop antenna for wireless application. Masters thesis, Universiti Tun Hussein Malaysia.
Alias, Nor Akmal (2013) Linear quadratic regulator (LQR) controller design for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.
Alir, Afifah (2013) Simulation of speed tracking for brushless DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.
Alomary, Mayada Faris Ghanim (2013) Implementation of multi carrier-code division multiple access-frequency division multiple access with beyond 4G specifications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Ardi, Mohd Aidil (2013) Power factor improvement in power system with the integration of renewable energy. Masters thesis, Universiti Tun Hussein Malaysia.
Atan, Farraniza (2013) Recycling kinetic energy from speed bump to generate electricity. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Awang Besar, Julkifli (2013) Quadrotor stability using PID. Masters thesis, Universiti Tun Hussein Malaysia.
Ayob, Mohammad Afif (2013) Dynamic leveling control of a wireless self-balancing ROV using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.
Azizan, Abdul Rahman (2013) Simulation of dynamic load effect on power system frequency. Masters thesis, Universiti Tun Hussein Onn Malaysia.
B. Alhaj, Reyad Mohamed (2013) Analysis of electric field strength propagating underneath the 132 kV overhead power line. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Bernard, Albinus (2013) Speed control of separately excited dc motor using artificial intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Bollah, Javadius (2013) Overspeed correction scheme for dc motor using artifical intelligent approach. Masters thesis, Universiti Tun Hussein Malaysia.
Che Ros, Ziana (2013) Optimal location of capacitor bank for power losses minimization. Masters thesis, Universiti Tun Hussein Malaysia.
Che Ros, Ziana (2013) Optimal location of capacitor bank for power losses minimization. Masters thesis, Universiti Tun Hussein Malaysia.
Che Sham, Izwan (2013) Buck converter switching design using microcontroller. Masters thesis, Universiti Tun Hussein Malaysia.
Chin, Ken Leong (2013) Programmable logic controller based variable speed drives for educational trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Eldagdag, Nabil Musbah (2013) Constant DC output boost converter for solar system sourace model. Masters thesis, Universiti Tun Hussein Malaysia.
Gorep, Nor Aizila (2013) Induction motor controller using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Hanzah, Nurulhuda Hanzah (2013) Intelligent power system protection data management. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Haron, Hartini Sharninayati (2013) Linear quadratic regulator (LQR) controller design for DC Servo motor. Masters thesis, Universiti Tun Hussein Malaysia.
Hashim, Mohd Nasri (2013) Induction motor modelling using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.
Hashim, Mokhtar (2013) Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Hashim, Nor Hasyiemah (2013) Menjana pemodulatan lebar denyut (PWM) penyongsang tiga fasa menggunakan pemproses isyarat digital (DSP). Masters thesis, Universiti Tun Hussein Malaysia.
Hashim, Nurul ‘Izzati (2013) Investigation of numerical technique to evaluate frequency response analysis (FRA) data measurement of auto power transformer. Masters thesis, Universiti Tun Hussein Malaysia.
Hassan Suliman, Khaled Abubaker (2013) Simulation of AC-DC converter for DC motor application using fuzzy logic control. Masters thesis, Universiti Tun Hussein Malaysia.
Ibrahim, Mohammed Khaleel (2013) Seamless horizontal handover algorithm for homogeneous wireless mobile networks using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.
Ibrahim, Muhammad Iskandar (2013) Development of an AC-DC buck power factor correction. Masters thesis, Universiti Tun Hussein Malaysia.
Inun, Haidie (2013) Path planning algorithm for a car like robot based on Coronoi Diagram Method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ismail, Nurfakhirah (2013) Fuzzy logic controller design for inverted pendulum system. Masters thesis, Universiti Tun Hussein Malaysia.
Jaafar, Lizawati (2013) Automatic room temperature control. Masters thesis, Universiti Tun Hussein Malaysia.
Jakuil, Alester G (2013) Multi criteria decision making on load shedding scheme in an islanded system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Jamaludin, Mohd Nor Aidi (2013) Off grid Pico Hydro Power Generator utilizing household water supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Kamarudin, Mohd Khairul Shazril (2013) Two way power flow in advance distributions and micro grid. Masters thesis, Universiti Tun Hussein Malaysia.
Katim, Nurul Izzatul Akma (2013) Asset management decision making of power transformer with insulation ageing knowledge. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Khalid, Khairul Nadiah (2013) Comparative study of micromixers for laminar blood mixing. Masters thesis, Universiti Tun Hussein Malaysia.
Kimbin, Daniel (2013) A new AHP – based reactive power valuation method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Kimpol, Norhanisa (2013) Study of solution towards ground leakage current via inverter switching in different topologies for grid connected PV system. Masters thesis, Universiti Tun Hussein Malaysia.
Mad Zaki @ Abdullah, Shahrul Radzi (2013) Analysis of fiber nonlinearity for various power levels in DWDM system. Masters thesis, Universiti Tun Hussein Malaysia.
Mahadan, Mohd Ezwan (2013) Simulation of a single-phase active power filter based ANN controller. Masters thesis, Universiti Tun Hussein Malaysia.
Mahmood Almuhaya, Mukarram Abduljalil (2013) FPGA based maximum power point tracking controller for photovoltaic system. Masters thesis, Universiti Tun Hussein Malaysia.
Mat Ali, Mazita (2013) Development of self balancing platform on mobile robot using PID controller. Masters thesis, Universiti Tun Hussein Malaysia.
Mat Yusoh, Mohd Abdul Talib (2013) Development of a single phase active Power filter for rectifier load. Masters thesis, Universiti Tun Hussein Malaysia.
Mazni, Nuur Maisya (2013) G-slot microstrip patch antenna for RFID application. Masters thesis, Universiti Tun Hussein Malaysia.
Md Esa, Muhamad Matta (2013) Mitigating blind spot collision utilizing ultrasonic gap perimeter sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Md Sarif, Nur Azhani (2013) Personal navigator for visual impaired person utilizing galvanic vestibular stimulator. Masters thesis, Universiti Tun Hussein Malaysia.
Md Tahir, Zuraidi (2013) Development of an AC-DC boost power factor correction. Masters thesis, Universiti Tun Hussein Malaysia.
Mihaj, Kamarul Faiz (2013) Conceptual design of harvesting energy system for road application. Masters thesis, Universiti Tun Hussein Malaysia.
Mohamad, Nur Suriya (2013) A study of energy efficiency opportunities in Putrajaya Maritime Centre towards green building. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamad, Salamiyah (2013) Development of a power factor correction boost converter in single phase rectifier using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.
Mohamad Ali, Ummu Umairah (2013) Transformer life prediction using data from units removed from service. Masters thesis, Universiti Tun Hussein Malaysia.
Mohamed, Ehab Ali (2013) Compact monopole antenna for wireless USB dongle applications. Masters thesis, Universiti Tun Hussein Malaysia.
Mohamed, Hazizul (2013) Smart torque control for overloaded motor using artificial intelligence approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamed, Saleh Omar (2013) Performance enhancement of salisbury screen microwave absorber using dual-layer frequency selective surfaces (FSS). Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohammad, Intan Shafinaz (2013) Receiver bandwidth enhancement design for high speed optical system. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Ariffin, Maslina (2013) Enhancing fuel burning efficiency by regulate spark plug voltage supply. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Jamil, Johanis (2013) Control and monitoring of solar photovoltaic panel using PLC. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Kasim, Ct Valkyis (2013) Analysis of existing effectiveness and method to enhance the lightning, shielding and earthing protection schemes applied on the Parit Raja’s Telecommunication Tower System. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Radzi, Mohd Zulhisham (2013) Optimal allocation and sizing of distributed generation using particle swarm optimization in distribution system. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Radzi, Mohd Zulhisham (2013) Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Ridzuan, Noridah (2013) Design and simulation of low power consumption polymeric based MMI thermo-optic switch. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Sadri, Mohd Pawzi (2013) Path planning algorithm for a car like robot based on MILP method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muda@Othman, Asmawi (2013) Development of a power factor correction buck converter in single phase rectifier using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.
Mustapha, Mohd Faizal (2013) Elimination THD using 9- level DC to AC cascade H-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Malaysia.
Mustapha, Mohd Faizal (2013) Elimination THD using 9-level DC to AC cascade h-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mustapha, Nik Mohd. Zaitul Akmal (2013) Optimal load shedding for microgrids with unlimited DGs. Masters thesis, Universiti Tun Hussein Malaysia.
Nik Mustaffa, Nik Khatijah (2013) Dual mode microstrip open loop resonator and filter for wireless lan applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Nik Supian, Nik Mohd Azri (2013) Sensitivity study on influencing parameters of transformer thermal model with directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Nongkang, Jumriani (2013) A study on credit evaluation of power consumer based on the topsis and AHP method. Masters thesis, Universiti Tun Hussein Malaysia.
Omar, Nurhanum (2013) Path planning algorithm for a car-like robot based on cell decomposition method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ong, Hui Niang (2013) Fractal koch antenna for indoor tv and fm reception. Masters thesis, Universiti Tun Hussein Malaysia.
Oon, Syahira Raihan (2013) Lifetime prediction and estimation of power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Pandak Jabo, Nurul Izzati (2013) Safety distance awareness system for Malaysian Driver. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Radhi Kamaruzaman, Ahmad Khairul (2013) Optimal combined load forecast based on multi-criteria decision making methods. Masters thesis, Universiti Tun Hussein Malaysia.
Rasdi, Normalina (2013) A novel technique for non-interuppted replacement ups system with the integration of portable transfer switch (PTS). Masters thesis, Universiti Tun Hussein Malaysia.
Saad, Sahrudin (2013) Development of an ac-dc buck-boost power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Saadon, Eddy Irwan Shah (2013) Evaluating the IEEE 802.15.4a UWB physical layer for WSN applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Salleh, Mariam (2013) Comparison of rhombic type micromixer to improve mixing efficiency in biomems application. Masters thesis, Universiti Tun Hussein Malaysia.
Salleh, Noor Amani (2013) A new routing metric for DYMO protocol on mobile AD HOC network. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sarnon, Mohd Zaki (2013) Two ways power flow with renewable energy integration. Masters thesis, Universiti Tun Hussein Malaysia.
Sa’don, Siti Nor Hafizah (2013) Planar inverted-f antenna (PIFA): a study of specific absorption rate (SAR) by using dual frequencies in mobile communications. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Selamat, Mohd Khairul Zawawi (2013) Enhanced under frequency load shedding (UFLS) schemes performance in Sabah Grid System. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sherwani, Fahad (2013) Robotic path planning using rapidly-exploring random trees. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Siagian, Caroline Dame (2013) Risk assessment in power system using multi-criteria decision making (MCDM) methods. Masters thesis, Universiti Tun Hussein Malaysia.
Soluman Ahtiwish, Aimen Khalifa (2013) Optimization of DC - DC boost converter using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Songkin, Myjessie (2013) Voltage instability analysis on the Sabah grid system: a case study my. Masters thesis, Universiti Tun Hussein Malaysia.
Soon, Adrian Bee Toing (2013) Intelligent road recognition system for automous vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Malaysia.
Syed Jamalil, Syed Akhmal (2013) Solving economic dispatch problem using particle swarm optimization. Masters thesis, Universiti Tun Hussein Malaysia.
Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.
Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.
Thazali, Nur Athirah (2013) Investigations of ageing mechanism and electrical withstand performances of the field aged 132 kV PMU Skudai's ceramic post insulator. Masters thesis, Universiti Tun Hussein Malaysia.
Ulusow, Shafi’i Mo’allim Ali (2013) Bandwidth optimization of ultra-wideband (UWB) antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ulusow, Shafi’i Mo’allim Ali (2013) Bandwidth optimization of ultra-wideband (UWB) antenna. Masters thesis, Universiti Tun Hussein Malaysia.
Valdez, Clara (2013) Voltage stabilizer of generator output through field current control using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Wan Mohd, Wan Syahidah (2013) Linear quadratic gaussian (LQG) controller design for servo motor. Masters thesis, Universiti Tun Hussein Malaysia.
Yaakub, Muhamad Faizal (2013) The implementation of sinusoidal PWM on single phase 5-level cascaded H-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Yaqoob, Mansoor Taha (2013) Transformer thermal model of the disk coils with non directed oil flow. Masters thesis, Universiti Tun Hussein Malaysia.
Yaqub, Muhammad Atif (2013) Multi fingered robot hand in industrial robot application using tele-operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Yusof, Ahmad Muhyiddin (2013) A comparative study of conventional PID and fuzzy-PID for DC motor speed control. Masters thesis, Universiti Tun Hussein Malaysia.
Yusof, Mohd Faiz Husny (2013) Development of dc-dc converter for dc motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.
Zakaria, Intan Suria (2013) RFID-based indoor positioning of autonomous aid for disable people. Masters thesis, Universiti Tun Hussein Malaysia.
Zakaria, Mohd Sharif (2013) Development of a non-pulsating buck-boost converter with continuous current mode (CCM). Masters thesis, Universiti Tun Hussein Malaysia.
Zakaria, Noor Shazliza (2013) Rice husk/dust air particle sensor using zigbee wireless sensor network. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Zakaria, Salmi (2013) Analysis and reduction of stimulated raman scattering in DWDM fibre optic communication system. Masters thesis, Universiti Tun Hussein Malaysia.
Zaratang, Lucian (2013) Load flow studies on stand alone microgrid system in Ranau, Sabah. Masters thesis, Universiti Tun Hussein Malaysia.
Zulkarnain, Maizul Haffin (2013) Design and simulation study of obstacle based passive micromixer. Masters thesis, Universiti Tun Hussein Malaysia.