Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2014

A

A. Kadhim Fahad, Abu Abdullah (2014) Modeling and control of quartz crystal operated in liquid for bio-sensing application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Abbas Allawi (2014) Optimization of parameters of laser non-linear inclined cutting on stainless steel metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Estabraq Khudhair (2014) Pressure loss prediction and control model for water treatment units. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulguad, Osama. H. (2014) Aerodynamic comparison and validation of rans, K-ω, standard K-ɛ and URANS simulations of flat plate film-cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Nurdin (2014) Analysis of corrosion fatigue for commercially pure titanium using nitrogen ion implantation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Hussein, Maher (2014) Development of a computer aided decision support tool for selecting organisational improvement initiatives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asmayou, Ali. H. (2014) Simulation of palm oil and methanol mixing in stirred tank by implement a normal and fractal baffles. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Azahari, Mohamad Azhar (2014) A study on extrusion of multiple material bonding for fused depostion modeling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Daud, Nur Atiqah (2014) Modelling and control of heat exchanger by using bio-inspired algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Feriyanto, Dafit (2014) Development of nanocrystalline Fe80Cr20 alloy using combination technique of ball milling and ultrasonic treatment for fuel cell interconnector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Ghitheeth Al-Challabi, Ali Hussein (2014) Heat transfer enhancement in a rectangular duct by using winglet and nanofluids. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hamjah, Mohd Khairulamzari (2014) Optimization of new semi-automatic TIG welding process for surface quality through taguchi method. Masters thesis, Universiti Tun Hussein Malaysia.

Hariri, Azian and Azreen, N. and Abdull, Norhidayah and Leman, M and M Yusof, M. Z. (2014) Determination of customer requirement for welding fumes index development in automotive industries by using quality function deployment approach. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1609-1619. ISSN 2229-8649

Hariri, Azian and Paiman, Nuur Azreen and Leman, Abdul Mutalib and Md. Yusof, Mohammad Zainal (2014) Development of welding fumes health index (WFHI) for welding workplace’s safety and health assessment. Iranian Journal of Public Health, 43 (8). pp. 1045-1059. ISSN 2251-6085

Hayder, Ali Mohammed (2014) Numerical study of jet impingement cooling on a smooth curve surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibrahim, Mohd Norihan and Adi Siswanto, Waluyo and Ahmad Zaidi, Ahmad Mujahid (2014) Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles. Applied Mechanics and Materials, 660 (NIL). pp. 598-602. ISSN 1660-9336

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jaber Al-Talqani, Ayad Jasim (2014) Numerical simulation of heat transfers on a circular cylinder by an impinging jet with nanofluid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaini, Norhaslina (2014) Vibration analysis of a beam structure attached with two dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Jamali, Qadir Bakhsh (2014) Design and analysis of a hybrid locomotion system for mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamalludin, Mohd Riduan (2014) Enhancement of antifouling properties using rice husk silica particles in polysulfone membrane and optimization of its operating condition. Masters thesis, Universiti Tun Hussein Malaysia.

Jamit, Rexca (2014) An evaluation of aerodynamics performance of a moving car with wind turbine system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jun, Ma and Meng, Qingshi and Zaman, Izzuddin and Zhu, Shenmin and Michelmore, Andrew and Nobuyuki, Kawashima and Wang, Chun H. and Kuan, Hsu-Chiang (2014) Development of polymer composites using modified, high-structural integrity graphene platelets. Composites Science and Technology, 91 (NIL). pp. 82-90. ISSN 0266-3538

K

Kasmin, Ashari (2014) Design for sustainability (D4S) in product development using solidworks software: a case study of redesign a sugar cane extractor machine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

Ma, Jun and Meng, Qingshi and Zaman, Izzuddin and Zhu, Shenmin and Michelmore, Andrew and Kawashima, Nobuyuki and Chun, H. and Wang, Hsu-Chiang Kuan (2014) Development of polymer composites using modified, high-structural integrity graphene platelets. Composites Science and Technology, 91. pp. 82-90. ISSN 0266-3538

Majid, Mariam (2014) Study of artificial neural network scheme application in manufacturing industry for monitoring-diagnosis bivariate process variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marian, Mohd Fairuz (2014) Synergistic artificial neural network scheme for monitoring and diagnosis of multivariate process variation in mean shifts. Masters thesis, Universiti Tun Hussein Malaysia.

Masood, Ibrahim and Hassan, Adnan (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications, 41 (16). pp. 7579-7595. ISSN 0957-4174

Mat Shah, Muhammad Amir (2014) Flexible link aerator for dissolved oxygen generation in tiger prawn pond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, M. H. and Todo, M. and Takano, Hiromitsu and Yonezawa, Ikuho (2014) Finite element analysis of osteoporotic vertebrae with first lumbar (L1) vertebral compression fracture. International Journal of Applied Physics and Mathematics, 4 (4). pp. 267-274. ISSN 2010-362X

Mohamad Nasir, Nadia Nurnajihah (2014) Vibration simulation of plate with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Alazomui, Outman (2014) On the development of computer code for aircraft flight dynamics analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Akmal Nizam and Ismail, Farzad (2014) Study of an entropy-consistent Navier–Stokes flux. International Journal of Computational Fluid Dynamics, 27 (1). pp. 1-14. ISSN 1029-0257

Mohammed, Mohammed Akram (2014) Quasiturbine rotor development optimization. Masters thesis, Universiti Tun Hussein Malaysia.

Mohammed Saif, Yazid Abdulsameea (2014) Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Usman, Abdullahi and Abdullah, Kamil (2014) Consolidation of material and waste management parameters for development of sustainable building rating systems. Journal of Built Environment, Technology and Engineering, 4. pp. 274-283. ISSN 0128-1003

Muhammad Marhaban, Agus Dwi Anggono (2014) Combined method for die compensation in sheet metal forming. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhsin Al-Juhaishi, Lafta Flayih (2014) Numerical analysis of a fin-tube plate heat exchanger with winglets. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nasir, N. F. and W. Daud, W. R. and Kamarudin, S. K. and Yaakob, Z. (2014) Methyl esters selectivity of transesterification reaction with homogenous alkaline catalyst to produce biodiesel in batch, plug flow, and continuous stirred tank reactors. International Journal of Chemical Engineering, 2014 (931264). pp. 1-13. ISSN 1687-806X

Nik Ismail, Nik Ainun (2014) Stress intensity factors of edge cracks in dissimilar joint plates. Masters thesis, Universiti Tun Hussein Malaysia.

Noh@Seth, Nur Hazirah and Nordin, Normayati and Othman, Safiah and Raghavan, Vijay R. (2014) Investigation of flow uniformity and pressure recovery in a turning diffuser by means of baffles. Applied Mechanics and Materials, 465-. pp. 526-530. ISSN 1660-9336

O

Othman, Mohd Syafiq Salman (2014) Investigating flush system method for minimum water usage of toilet system. Masters thesis, Universiti Tun Hussein Malaysia.

P

Paiman, Nuur Azreen (2014) Determination of baseline data on respirable dust concentration for safety and health enhancement in selected small and medium industries in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Sabdin, Saiful Din Sabdin (2014) The effect of heat compression on mechanical behaviour and moisture content of pineapple leaf fibre and sugarcane bagasse waste for plate disposal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saiman, Mohd Fahmi (2014) 2 dimension woven kenaf reinforced unsaturated polyester composite. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sani, Winardi (2014) Multistage methanolysis of crude palm oil for biodiesel production in a pilot plant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shamsudin, Muhamad Khairy (2014) Kajian terhadap sifat mekanik bagi jenis corak pengisian dalam proses pembuatan tiga demensi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suffian, Mohamad Mokhsen (2014) Performance and emissions of compression ignition engine fueled with preheated blend of vegetable oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

T. Arifin, A. M. and Abdullah, S. and ., Md. Rafiquzzaman and Zulkifli, R. and Wahab, D. A. (2014) Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition. Fibers and Polymers, 15 (8). pp. 1729-1738. ISSN 1229-9197

T. Arifin, A.M. and Abdullah, S. and Zulkifli, R. and Wahab, D.A. (2014) Fatigue failures of differences behaviour on CSM/woven roving composite materials. Applied Mechanics and Materials, 471. pp. 335-340. ISSN 1660-9336

Tajul Arifin, Ahmad Mubarak and Abdullah, Shahrum and Zulkifli, Rozli and Abdul Wahab, Dzuraidah and Rafiquzzaman, Mohammad (2014) Behavior of chopped strand mat and woven roving under bending. Mechanical Testing, 56 (11-12). pp. 994-1000. ISSN 0025-5300

W

Wu, Jia Hang (2014) Maximum torque of combination threats for spur gear based on AGMA and JGMA standards. Masters thesis, Universiti Tun Hussein Malaysia.

Z

Zainulabidin, Muhd Hafeez and Gorman, D. G. (2014) Axial vibration mode of coupled liquid-structure-gas system in a rigid cylindrical container. International Journal of Mechanical & Mechatronics Engineering, 14 (3). pp. 106-113. ISSN 2227-2771

Zakaria, Hanis and Khalid, Amir and Sies, Mohamad Farid and Mustaffa, Norrizal (2014) Overview effect of biodiesel storage on properties and characteristics. Applied Mechanics and Materials, 465. pp. 260-264. ISSN 1660-9336

Zakaria, Hanis and Khalid, Amir and Sies, Mohamad Farid and Mustaffa, Norrizal and B., Manshoor (2014) Effect of storage temperature and storage duration on biodiesel properties and characteristics. Applied Mechanics and Materials, 465. pp. 316-321. ISSN 1660-9336

Zaman, Izzuddin and Araby, Sherif and Khalid, Amir and Manshoor, Bukhari (2014) Moisture absorption and diffusivity of epoxy filled layered-structure nanocomposite. Advances in Environmental Biology, 8 (8). pp. 2626-2631. ISSN 1995-0756

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites-a survey. Journal of Polymer Research, 21 (NIL). pp. 1-11. ISSN 1022-9760

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites—a survey. Journal of Polymer Research, 21 (5). pp. 1-11. ISSN 1022-9760

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Meng, Qingshi and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Materials Science, 49 (NIL). pp. 5856-5865. ISSN 0022-2461

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Meng, Qingshi and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Material Science, 49. pp. 5856-5865. ISSN 0022-2461