Items where Subject is "T Technology > TH Building construction > TH1000-1725 Systems of building construction. Including fireproof construction, concrete construction"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 168.

Article

A. Khalid, Nur Hafizah and Ismail, Mohammad and Mohd. Sam, Abd Rahman and Mohamed, Azman and A. Ismail, Mohamed and Jamellodin, Zalipah and Salleh, Norhafizah and A. Hamid, Noor Azlina and A. Majid, Masni (2018) Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash. Advanced Science Letters, 24 (6). pp. 3974-3977. ISSN 1936-6612

AL-Fadhali, Najib and Zainal, Rozlin and Kasim, Narimah and Dodo, Mansir and Ng, Kim Soon and Ali Hasaballah, Abdel Hafiz (2019) The desirability of Integrated Influential Factors (IIFs) model of internal stakeholder as a panacea to project completion delay in Yemen. International Journal of Construction Management, 19 (2). pp. 128-136. ISSN 1562-3599

Abas, Nor Haslinda and Mohd Ta’at, Nurul Hasanah and Hasmori, Muhammad Fikri and Abdullah, Abd.Halid and Nagapan, Sasitharan and Deraman, Rafikullah and Yean, Ghing Tong and Hardono, Setiawan (2018) Noise assessment at construction site which uses IBS formwork system. Asian Journal of Technical Vocational Education And Training (AJTVET), 4. pp. 33-41. ISSN 0128-0600

Abas, Nor Haslinda and Yap, Wai Heong and Mohammad, Hairuddin and Yaman, Siti Khalijah and Rahmat, Muhamad Hanafi (2020) The analysis of struck-by accidents at construction sites in Johor. The International Journal of Integrated Engineering, 12 (4). pp. 266-275. ISSN 2229-838X

Abd Roni, Norwardatun and Adnan, Suraya Hani and Hamdan, Rafidah (2018) Recycled concrete aggregates as a filter for removal of phosphorus in synthetic wastewater. International Journal of Engineering and Technology, 7 (4.3). pp. 116-120. ISSN 2227-524X

Abd Roni, Norwardatun and Adnan, Suraya Hani and Hamidon, Nuramidah and Tuan Ismail, Tuan Noor Hasanah (2021) The physical and chemical characteristic of recycled concrete aggregate for removal phosphorus as a filter system. Journal of Advanced Industrial Technology and Application, 2 (1). pp. 65-70.

Abdul Awal, A.S.M. and Shehu, I.A. and Ismail, Mohammad (2015) Effect of cooling regime on the residual performance of high-volume palm oil fuel ash concrete exposed to high temperatures. Construction and Building Materials, 98 (NIL). pp. 875-883. ISSN 0950-0618

Abdul Awal, A.S.M. and Wan Ibrahim, Mohd Haziman and Mohd Ali, Ahmad Zurisman and Hossain, M. Zakaria (2017) Mechanical properties and thermal behaviour of two-stage concrete containing palm oil fuel ash. International Journal of GEOMATE, 12 (32). pp. 166-175. ISSN 2186-2990

Abdul Hamid, Noor Azlina and Abdullah, Ramli and Adnan, Suraya Hani and Jamellodin, Zalipah and A. Majid, Masni and Salleh, Norhafizah and Md. Noor, Nurazuwa (2020) Performance of independent horizontal and inclined bars as shear reinforcement for reinforced concrete beams. Journal of Advanced Research In Dynamical and Control Systems, 12 (2). pp. 608-614. ISSN 1943023X

Abdullah, Hanif and Sarpin, Norliana and Omar, Roshartini and Mohamed, Sulzakimin and Ismayatim, Norddin (2021) Kajian masalah kewangan yang dihadapi kontraktor bumiputera semasa fasa pembinaan. Research in Management of Technology and Business, 2 (1). pp. 812-830.

Abdullah, Mohd Ezree and Zamhari, Kemas Ahmad and Oluwasola, Ebenezer Akin and Abdul Hassan, Norhidayah and Ahmad, Nur Izzi (2016) Engineering properties of asphalt binders containing nanoclay and chemical warm-mix asphalt additives. Construction and Building Materials, 112. pp. 232-240. ISSN 0950-0618

Abdullah, Siti Radziah and Riwayat, Akhtar Izzaty and Hossain, M. Zakaria (2017) Effect of rubber powder particle on the strength of foamed concrete. International Journal of GEOMATE, 13 (38). pp. 129-134. ISSN 2186-2990

Abdulrazzaq Azeez, Alyaa and Jamaluddin, Norwati and Abd Rahman, Norashidah and Hassen, Douread Raheem and Attiyah, Ali Naji (2018) Experimental and analytical study of pvc confined concrete cylinders. Journal of Engineering and Applied Sciences, 13 (8). pp. 2145-2151. ISSN 1816-949x

Adnan, Suraya Hani and Adnan, Suzana Wati and Zakaria, Muhammad Shukri and Osman, Mohamad Hairi and Jamellodin, Zalipah (2018) The use of cement leftovers from the hollow of spun piles as an additive in self-compacting concrete. MALAYSIAN CONSTRUCTION RESEARCH JOURNAL (MCRJ), 5 (3). pp. 43-51. ISSN 2590 – 4140

Adnan, Suraya Hani and Mohd Nar, Mari’e Alina and Osman, Mohamad Hairi and Wan Jusoh, Wan Amizah and Jamellodin, Zalipah and Wahee Anuar, Mohamad Nor Akasyah (2020) The study on used of tropical wood sawdust as a replacement fine aggregates in concrete mix. International Journal of Advanced Science and Technology, 29 (6s). pp. 1542-1548. ISSN 2005-4238

Adnan, Suraya Hani and Mohd Yassin, Nurain Izzati and Shahidan, Shahiron and Osman, Mohamad Hairi and Ahmad Jeni, Mohamad Luthfi and Wan Jusoh, Wan Amizah and Jamellodin, Zalipah and Abdul Hamid, Noor Azlina and Ahmad, Faridahanim (2021) Concrete brick properties incorporating EPS and POFA as replacement materials. Journal of Advanced Research in Materials Science, 77 (1). pp. 14-25. ISSN 2289-7992

Ahmed Al-Fadhali, Najib Mohammed and Zainal, Rozlin (2017) A theoretical framework on factors causing delay of construction industries projects. The Social Sciences, 12 (3). pp. 393-399. ISSN 1818-5800

Ahmed Jhatial, Ashfaque and Goh, Wan Inn and Sohu, Samiullah and Mohamad, Noridah (2020) Thermo‑mechanical properties of various densities of foamed concrete incorporating polypropylene fibres. Arabian Journal for Science and Engineering, 45. pp. 8171-8186. ISSN 2193-567X

Ahmed Jhatial, Ashfaque and Wan, Inn Goh and Mohamad, Noridah and Lee, Wai Hong and Lakhiar, Muhammad Tahir and Abdul Samad, Abdul Aziz and Abdullah, Redzuan (2018) The mechanical properties of foamed concrete with polypropylene fibres. International Journal of Engineering and Technology, 7 (3.7). pp. 411-413. ISSN 2227-524X

Ahmed Jhatial, Ashfaque and Wan, Inn Goh and Mohamad, Noridah and Sohu, Samiullah and Lakhiar, Muhammad Tahir (2016) Utilization of palm oil fuel ash and eggshell powder as partial cement replacement - a review. Civil Engineering Journal, 4 (8). pp. 1977-1984. ISSN 2476-3055

Alaa A., Shakir and Wan Ibrahim, M. H and Shahidan, S (2018) The effect of palm oil clinker and oil palm shell on the compressive strength of concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 43. pp. 1-14. ISSN 2228-6160

Ali, Noorwirdawati and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and Abdullah, Siti Radziah and Jamellodin, Zalipah (2019) Reinforced Concrete Beams with Opening Strengthened using CFRP Sheets. The International Journal of Integrated Engineering, 11 (8). pp. 303-312. ISSN 2229-838X

Ali, Roslinda and Marsi, Noraini and Mustafa Kamal, Nur Fatin Izzaty and Muhamad, Mimi Suliza and Mohamed Sunar, Norshuhaila and Harun, Hasnida and Abdul Hamid, Hazren and Hamidon, Nuramidah (2020) A study on the characteristic of an eco-brick as a replacement to the conventional brick. Progress in Engineering Application and Technology, 1 (1). pp. 22-29. ISSN 0000-0000

Ang, Peniel Soon Ern and Yong, Yee Ooi and Al-Ashmori, Yasser Yahya (2020) Comparative study on the perspective towards the benefits and hindrances of implementing building information modelling (BIM). International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 194-205. ISSN 2180-3242

Arafa, S.A. and Mohd Ali, A.Z.B. and Abdul Awal, A.S.M. and Shamsuddin, Shamrul-Mar and Hossain, M. Zakaria (2018) Properties of coated and uncoated biomass aggregates and their effects on the strength and water permeability of pervious geopolymer concrete. International Journal of GEOMATE, 14 (41). pp. 44-51. ISSN 2186-2982

Arshad, Mohd Fadzil and Awang, Haryati and Putra Jaya, Ramadhansyah and Ali, Mohamad Idris and Mohd Yusak, Mohd Ibrahim and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman (2018) Effect of nano black rice husk ash on the chemical and physical properties of porous concrete pavement. Journal of Southwest Jiaotong University, 53 (5). pp. 1-6. ISSN 0258-2724

Azman, Mohamed Nor Azhari and S Ahamad, Mohd Sanusi and Abd Hamid, Zuhairi and Gomez, Christy P and Mohamad Kamar, Kamarul Anuar and Hilmi, Nur Diyana and Mansor, Hezil and Ismail, Zulkefle (2012) The selection of IBS precast manufacturing plant in Malaysia using GIS. Malaysian Construction Research Journal, 10 (1). pp. 77-90. ISSN 1985-3807

Bahari, Nur Aishah Zafirah and Osman, Mohamad Hairi and Mahyeddin, Mohd Eizzuddin (2021) Mechanical properties of concrete containing POFA and EPS as replacement materials. Progress in Engineering Application and Technology, 2 (1). pp. 275-284.

Bhatti, Imtiaz Ali and Abdullah, Abd Halid and Nagapan, Sasitharan and BHATTI, Nabi Bux and Lakhiar, Muhammad Tahir and MAHAR, Muntazir Mahdi (2019) Building construction labour productivity in arid climate environment. Journal of Applied Engineering Sciences, 9 (22). pp. 125-130. ISSN 2247-3769

Chai, Teck Jung and Tang, Hing Kwong and Koh, Heng Boon (2018) Water absorption and drying shrinkage of recycled foamed aggregate concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 466-476. ISSN 2600-9498

Che Haron, Roziha and Nasid Masrom, Md Asrul and Kamal, Khairani (2021) Assessing causes of contractual disputes from different type of condition of contracts. International Journal of Sustainable Construction Engineering and Technology, 11 (4). pp. 45-59. ISSN 2180-3242

Din, Abdul Talib and Mohd Hafiz, Norzawahir and Mohd Rus, Anika Zafiah (2018) Exploration to find green building materials from recycled solid wastes. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 47 (1). pp. 35-44. ISSN 2289-7879

Djamaluddin, Abdul Rachman and Caronge, Muhammad Akbar and Tjaronge, M. W. and Md. Noor, Nurazuwa and Rahim, Irwan Ridwan (2018) Abrasion resistance and compressive strength of unprocessed rice husk ash concrete. Asian Journal of Civil Engineering, 19. pp. 867-876. ISSN 1563-0854

F., S. Khalid and Z., Zaki and S., M. Saadin and S., Shahidan (2020) Effect of water to cement ratio and replacement percentage of recycled concrete aggregate on the concrete strength. International Journal of Advanced Science and Technology, 29 (6s). pp. 1625-1635. ISSN 20054238

Goh, Wan Inn and Abdul Samad, Abdul Aziz and Mohamad, Noridah and Abdullah, Redzuan (2016) Overview of empirical equation prediction for ultimate axial load of precast lightweight foamed concrete sandwich panel (PLFP). ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2366-2371. ISSN 1819-6608

Haron, Zaiton and Jusli, Euniza and Md Nor, Hasanan and Putra Jaya, Ramadhansyah and Yaacob, Haryati and Yahya, Khairulzan and Mohamad, Azman and Yahya, Musli Nizam (2018) Prediction of sound absorption coefficient for double layer rubberised concrete blocks. International Journal of Engineering & Technology, 7 (2.29). pp. 704-710. ISSN 2227-524X

Hassen, Douread R. and Abdul Samad, Abdul Aziz and A. Azeez, Alyaa (2017) Strengthening of prism beam by using NSM technique with roots planted in concrete. International Journal of Engineering and Technology, 9 (5). pp. 383-386. ISSN 0975-4024

Hidayat, Acep and Isradi, Muhammad and Prasetijo, Joewono (2019) Green technology through porous concrete. Review of Behavioral Aspect in Organizations & Society, 1 (2). pp. 189-194. ISSN 2656-0054

Idris, Nur’Ain and Mohd Noh, Hamidun and Mohamad, Nor Lailatul Izzatil Azwani and Bangau, Rolly (2020) Reinforced concrete by using the rectangular shape of voided beam. Journal of Mechanical Engineering, SI 9 (1). pp. 179-190. ISSN 1823-5514

Ishaq, Ishaq Muktar and Omar, Roshartini and Yahya, Mohd Yamani and Sarpin, Norliana (2019) Improving communication between client and contractor during construction project in Nigerian construction industry. Journal of Technology Management and Business, 6 (3). 060-075. ISSN 2289-7224

Ismail, Fadillah and Saimy, Intan Sazrina and Md. Yusoff, Rosman and Yusoff, Anis Yusal and Chan, Shiau Wei and Umi, Kartini Rashid (2018) Competency model of Indonesian construction laborers in Malaysia. International Journal of Engineering & Technology, 7 (2.29). pp. 1058-1062. ISSN 2227-524X

Ismail, Mohd Hanif and Mohd Rusly, Noor Syuhaili and Deraman, Rafikullah (2020) Strength and water absorption of concrete containing metakaolin and nylon fiber. International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 230-242. ISSN 2180-3242

Jamal, Mohammed and Noh, Mohammad Zaky and Al-juboor, Shihab and Wan Ibrahim, Mohd Haziman and Takai, Zakiyyu Ibrahim (2018) Mechanical properties of the concrete containing porcelain waste as sand. International Journal of Engineering and Technology, 7 (4.30). pp. 180-184. ISSN 2227-524X

Jamellodin, Zalipah and Mohd Saman, Hamidah and Adnan, Suraya Hani and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and A. Majid, Masni and Salleh, Norhafizah (2018) Flexural behaviour of plain concrete prism strengthened by textile fine grained mortar. Advanced Science Letters, 24 (6). pp. 3982-3985. ISSN 1936-6612

Jamellodin, Zalipah and Nor Azhar, Norazreen and Jamaly, Mohamad Arif and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Ismail, Noorli and Adnan, Suraya Hani Adnan and Abdul Rashid, Nur Nadhirah (2018) Strength of blended cement mortar containing palm oil fuel and eggshell ashes. International Journal of Engineering & Technology, 7 (3.7). pp. 598-600. ISSN 2227-524X

Juki, Mohd Irwan and Teddy, T. (2017) An overview of bacterial concrete on concrete durability in aggressive environment. Pertanika Journal: Science and Technology, 25 (NIL). pp. 259-264. ISSN 0128-7680

Kamarulzaman, Nurul Amirah and Adnan, Suraya Hani and Mohd Sari, Kamarul Aini and Osman, Mohamad Hairi and Ahmad Jeni, Mohamad Luthfi and Abdullah, M.S. and Soon, Ern P. Ang and Yahya, Nur Faezah and Yassin, N.I.M. and Wahee Anuar, M.N.A. (2018) Properties of cement brick containing expanded polystyrene beads (EPS) and palm oil fuel ash (POFA). Journal of Science and Technology, 10 (4). pp. 41-46. ISSN 2229-8460

Kasim, Narimah and Peniel Ang, Soon Ern (2010) The awareness of ICT implementation for materials management in construction projects. International Journal of Computer and Communication Technology, 2 (1). pp. 1-10. ISSN 0975 - 7449

Kasvar, K. K. and Nagapan, S. and Abdullah, A. H. and Ullah, K. and Deraman, R. and Yunus, R. and Sohu, S. (2017) Cost implication analysis of concrete and Masonry waste in construction project. Pertanika Journal of Social Science and Technology, 25 (S). pp. 177-184. ISSN 0128-7680

Khalid, F.S. and Irwan, J.M. and Ibrahim, M.H. Wan and Othman, N. and Shahidan, S. (2018) Splitting tensile and pullout behavior of synthetic wastes as fiber-reinforced concrete. Construction and Building Materials, 171. pp. 54-64. ISSN 0950-0618

Khalid, Muhammad Haziq and Abd Rahman, Ramhuzaini and Abdul Latif, Hanif and Yahya, Musli Nizam (2018) Prototyping and performance evaluation of fire rated acoustic door. International Journal of Integrated Engineering, 10 (4). pp. 6-11. ISSN 2229-838X

Lakhiar, Muhammad Tahir and Mohamad, Noridah and Shaikh, Muhammad Abu Bakar and Ahmed Vighio, Anees and Ahmed Jhatial, Ashfaque and Abdul Samad, Abdul Aziz (2018) Effect of river indus sand on concrete tensile strength. Engineering, Technology and Applied Science Research, 8 (2). pp. 2796-2798. ISSN 2241-4487

Lee, Yeong Huei and Lim, Ming Han and Lee, Yee Ling and Lee, Yee Yong and Tan, Cher Siang and Mohammad, Shahrin and Ma, Chau Khun (2018) Compressive strength of lightweight foamed concrete with charcoal as a sand replacement. Indian Journal of Engineering and Materials Sciences, 25 (1). pp. 98-108. ISSN 0971-4588

Manap, Norpadzlihatun and Muhamad, Nor Izzah and Sandirasegaran, Kavitha (2017) Strength and water absorption rate of concrete made from palm oil fuel ash. Materials Science Forum, 889. pp. 261-264. ISSN 1662-9752

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Sohu, Samiullah (2017) Utilization of sawdust ash as cement replacement for the concrete production: a review. Engineering Science Technology International Research Journal (ESTIRJ), 1 (3). pp. 11-15. ISSN 2521-5027

Mangi, Sajjad Ali and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Shahidan, Shahiron and Arshad, Mohd Fadzil and Memon, Sheeraz Ahmed and Putra Jaya, Ramadhansyah and Mudjanarko, Sri Wiwoho and Setiawan, Muhammad Ikhsan (2018) Influence of ground coal bottom ash on the properties of concrete. International Journal of Sustainable Construction Engineering and Technology (IJSCET), 9 (2). pp. 2180-3242. ISSN 2180-3242

Masrom, M. A .N. and Skitmore, Martin and Bridge, Adrian (2013) Determinants of contractor satisfaction. Construction Management and Economics, 31 (7). pp. 761-779. ISSN 1466-433X

Masrom, Md Asrul Nasid and Abd Rahim, Mohd Hilmi Izwan and Mohamed, Sulzakimin and Yunus, Riduan (2015) Preliminary qualitative findings: challenges in large infrastructure projects towards development of innovative performance measurement. Applied Mechanics and Materials, 773-77. pp. 1012-1016. ISSN 1660-9336

Md Azree Othuman Mydin, Md Azree Othuman Mydin and Mohamad Sukeri Khalid, Mohamad Sukeri Khalid and Roshartini Omar, Roshartini Omar and Hadee Mohammed Najm, Hadee Mohammed Najm and Shaker Mahmood Abdal Qaidi, Shaker Mahmood Abdal Qaidi and Paul Oluwaseun Awoyera, Paul Oluwaseun Awoyera (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 135-144. ISSN 2462-1943

Md Noha, M.S. and Ahmad, Z. and Ibrahim, A. and Walkerd, P. (2016) Development of new prefabricated wall constructed using wood-wool cement composite panel. Procedia Environmental Sciences, 34. pp. 298-308. ISSN 1878-0296

Misnon, Noor Aina and Che Osmi, Siti Khadijah and Shahidan, Shahiron and Chouw, N. (2017) Influence of coir random fibre length on concrete: mechanical properties. Malaysian Construction Research Journal, 22 (2). pp. 47-58. ISSN 1985-3807

Mohamad, N. and A. Samad, A. A. and Lakhiar, Muhammad Tahir and Mydin, Md Azree Othuman and Jusoh, Suriani and A., Sofia and Efendi, Suaidi Azis (2018) Effects of incorporating banana skin powder (BSP) and palm oil fuel ash (POFA) on mechanical properties of lightweight foamed concrete. International Journal of Integrated Engineering, 10 (9). pp. 169-176. ISSN 2229-838X

Mohamad, Noridah and Goh, Wan Inn and Samad, A.A.A. and Lockman, A. and Hadipramana, Josef (2017) Structural behaviour of beam with HDPE plastic balls subjected to flexure load. Materials Science Forum, 889 (NIL). pp. 270-274. ISSN 0255-5476

Mohamad, Noridah and Lakhiar, Muhammad Tahir and Mansor, Mohamad Syafiq and Koh, Heng Boon and Ahmed Jhatial, Ashfaque and Abdul Samad, Abdul Aziz and Goh, Wan Inn (2018) Computational analysis on flexural behavior of precast aerated concrete panel incorporating polypropylene fiber. International Journal of Engineering and Technology, 7 (3.4). pp. 209-212. ISSN 2227-524X

Mohammadhosseini, Hossein and Abdul Awal, A S M (2016) Green concrete production incorporating waste carpet fiber and palm oil fuel ash. Journal of Cleaner Production, 137 (NIL). pp. 157-166. ISSN 0959-6526

Mohammadhosseini, Hossein and Abdul Awal, A S M and Mohd Sam, Abdul Rahman (2016) Mechanical and thermal properties of prepacked aggregate concrete incorporating palm oil fuel ash. Sadhana, 41 (10). pp. 1-10. ISSN 0973-7677

Mohammed Usman, Abdullahi and Abdullah, Kamil (2018) Comparative study on the Malaysian sustainable building rating systems. International Journal of Integrated Engineering, 10 (3). pp. 69-77. ISSN 2600-7916

Mohammed Usman, Abdullahi and Abdullah, Kamil (2018) Consolidation of water management and efficiency parameters for development of green building rating system. Journal of Built Environment, Technology and Engineering, 4. pp. 284-294. ISSN 0128-1003

Mohd, Suzila and Brahim, Juliana and Ahmad Latiffi, Aryani and Fathi, Mohamad Syazli and Harun, Aizul Nahar (2017) Developing building information modelling (BIM) implementation model for project design team. Malaysian Construction Research Journal, 1 (1). pp. 71-83. ISSN 1985-3807

Mohd Azaman, N.A. and Abd Ghafar, N.H. and Azhar, A.F. and Fauzi, A. A. and Ismail, H. A. and Syed Idrus, S. S. and Mokhjar, S. S. and Abd Hamid, F.F. (2018) Investigation of concrete floor vibration using heel-drop, test. Journal of Physics: Conference Series, 995. pp. 1-8. ISSN 1742-6588

Mohd Nawi, Mohd Nasrun and Deraman, Rafikullah and Bamgbade, Jibril Adewale and Zulhumadi, Faisal and Mehdi Riazi, Salman Riazi (2017) E-Procurement in Malaysian construction industry: benefits and challenges in implementation. International Journal of Supply Chain Management, 6 (1). pp. 209-213. ISSN 2051-3771

Mohd Noor, Siti Rahimah and Yunus, Riduan and Abdullah, Abd Halid and Nagapan, Sasitharan and Syahir Syed Mazlan, Syed Mohamad (2018) Insights into the adoption of lean management in industrialised building system (IBS) implementation: the drivers and challenges. International Journal of Engineering & Technology, 7 (3.23). pp. 22-31. ISSN 2227-524X

Mohd Sari, Kamarul Aini and Mohammed Sani, Rahim (2017) Applications of foamed lightweight concrete. MATEC Web of Conferences, 97 (NIL). pp. 1-5. ISSN 2261-236X

Mohd Yusof, Yusrina and Othman, Siti Amira (2021) Preparation and characterization of cogon grass natural fiber as a concrete filler for gamma radiation shielding. Malaysian Journal of Analytical Sciences, 25 (3). pp. 446-465.

Mohd Yusof, Yusrina and Othman, Siti Amira (2021) Preparation and characterization of cogon grass natural fiber as a concrete filler for gamma radiation shielding. Malaysian Journal of Analytical Sciences, 25 (3). pp. 446-465.

Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron and Choong, Kok Keong and Jayaprakash, J. (2018) Effectiveness of repair method using hybrid fiber reinforced polymer fabric on concrete-filled double skin steel tubular columns exposed to fire. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 239-250. ISSN 1985-3807

Mokhatar, Shahrul Niza and Mohd Zuki, Sharifah Salwa and Hadipramana, Josef and Kamarudin, Ahmad Fahmy and Md Noh, Mohammad Soffi and Mustafa, Mohamed Muftah and Norshahimi, Nurul Shazlin (2018) Damage of reinforced concrete beams consisting modified artificial polyethylene aggregate (MAPEA) under low impact load. MCRJ Special Issue, 4 (2). pp. 184-192. ISSN 19853807

Mokhatar, Shahrul Niza and Sonoda, Yoshimi and Kamarudin, Ahmad Fahmy (2020) Application of simple plane cap model to simulate compression failure of RC beam under impact loads. International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 243-252. ISSN 2180-3242

Musaa, M. K. and A. Rahman, M. A. and H., Nurzalina and Lip, R. (2021) Pembinaan konstruk instrumen penilaian pasca penghunian untuk perumahan bertingkat yang dibina menggunakan kaedah Sistem Binaan Berindustri (IBS). Jurnal Teknologi, 83 (2). pp. 85-94.

Osman, Mohamad Hairi and Adnan, Suraya Hani and Yahya, Nur Faezah (2020) Potential of using palm oil fuel ash and expanded polystyrene as an alternative concrete substance. International Journal of Sustainable Construction Engineering and Technology, 11 (1). pp. 151-163. ISSN 2180-3242

Othuman Mydin, Md Azree and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Abdal Qaidi, Shaker Mahmood and Paul Oluwaseun Awoyera, Paul Oluwaseun Awoyera (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 2462-1943

Putra Jaya, Ramadhansyah and Che Wan, Che Norazman and Hainin, Mohd Rosli and Mohd Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd Fadzil (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X

Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman and Nazri, Fadzli Mohamed and Arshad, Mohd Fadzil and Muthusamy, Khairunisa (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-168. ISSN 2229-838X

Rasib, Abd Wahid and Mohd Ali, Hamzah and Alvin, L.M.S. and Kanniah, K.D. and Idris, Nurul Hawani and Omar, Hamdan and Dollah, Rozilawati and Ahmad, Mustaffa Anjang (2018) Upscaling aboveground biomass estimation at low-land royal belum forest reserve using unmanned aerial vehicle image. International Journal of Integrated Engineering, 10 (4). pp. 140-150. ISSN 2229-838X

Roslee, Faiza and Mohd Kamil, Nor Amani Filzah and Abd Kadir, Aeslina (2017) Potential of ground and unground palm oil fuel ash in construction material. International Journal of Integrated Engineering, 3 (1). pp. 1-4. ISSN 2229-838X

Rosli, Siti Nurhaliza and Osman, Mohamad Hairi and Mahyeddin, Mohd Eizzuddin (2021) A simulation model of solid concrete beam containing Palm Oil Fuel Ash (POFA) and Expeneded Polystyrene (EPS) using finite element method. Progress in Engineering Application and Technology, 2 (1). pp. 216-224.

Salleh, Norhafizah and Mohd Sam, Abdul Rahman and Mohd Yatim, Jamalludin and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and Jamellodin, Zalipah and A. Majid, Masni (2018) Effect of CFRP plate length on flexural behavior of GFRP reinforced concrete beam strengthening. Advanced Science Letters, 24 (6). pp. 3968-3973. ISSN 1936-6612

Shahidan, Shahiron and Pulin, Rhys and Muhamad Bunnori, Norazura and M. Holford, Karen (2013) Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Materials, 45. pp. 78-86. ISSN 0950-0618

Shahidan, Shahiron Sh and Abdullah, Siti Radziah and Ismail, Isham (2016) Relationship between ae signal strength and absolute energy in determining damage classification of concrete structures. Jurnal Teknologi, 78 (5). pp. 91-98. ISSN 2180–3722

Sheikh Khalid, Faisal and Juki, Mohd Irwan and Wan Ibrahim, Mohd Haziman and Othman, Norzila and Shahidan, Shahiron (2018) Performance of plastic wastes in fiber-reinforced concrete beams. Construction and Building Materials, 183. pp. 451-464. ISSN 0950-0618

Sia, Mal Kong and Gomez, Christy Pathrose (2009) Countrywide survey on ISO 9001-certified companies in Malaysian construction industry. Malaysian Construction Research Journal, 5 (2). pp. 29-44. ISSN 1985-3807

Sia, Mal Kong and Gomez, Christy Pathrose and Abd. Hamid, Zuhairi (2010) Application of structural equation modelling in construction management research. Journal of Civil Engineering and Architecture, 4 (2). pp. 48-70. ISSN 1934-7359

Teddy, T. and J.M., Irwan and Othman, N. and Gani, P. (2018) Bio-concrete on chloride condition: effect on compressive strength and water penetration. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 129-140. ISSN 2590 - 4140

Wan Jusoh, Wan Amizah and Syahrizal Ibrahim, Izni and Mohd Sam, Abdul Rahman and Sarbini, Noor Nabilah (2016) Mechanical and shrinkage properties of hybrid steel and polypropylene fibre reinforced concrete composite. Jurnal Teknologi, 78 (9). pp. 93-103. ISSN 0127-9696

Wayrah, Mohamed Yusuf and Sarpin, Norliana and Mohamed, Sulzakimin and Masrom, Md. Asrul Nasid (2021) The impact of material management on construction project delivery in Somalia. Journal of Technology Management and Business, 8 (1). pp. 59-72. ISSN 2289-7224

Yaman, Siti Khalijah and Hassan, Padzil@Fadzil and Yusop, Nur Maisarah and Hashim, Nur E’zzati and Mohammad, Hairuddin and Abu Bakar, Hasniza (2022) Factors affecting quality in Construction Project Life Cycle (CPLC). International Journal of Integrated Engineering, 14 (1). pp. 322-335. ISSN 2229-838X

Yunus, Riduan and Yang, Jay (2016) Legislative challenge to sustainable application of industrialized building system (IBS). Jurnal Teknologi, 78 (5). pp. 45-55. ISSN 2180–3722

‪Adnan, Suraya Hani‬ and Hamdan, ‪Rafidah and Yassin, N.I.M. and Roni, N. A. (2018) Removal of phosphorus from synthetic wastewater using recycled concrete aggregates as a filter medium. Journal of Civil Engineering, Science and Technology, 9 (1). pp. 13-26. ISSN 2462-1382

Book Section

A. Rashid, Mohamad Syafiq and Chan, Chee Ming and Shaari, Muhammad Farid (2020) Structural analysis of long arm excavator boom for optimization performance under maximum breakout condition. In: Construction Materials and Technology. Penerbit UTHM, pp. 73-90. ISBN 978-967-2389-63-7

Abas, Nor Haslinda and Jaafar, Azman and Mat Seman, Ahmad Shakri (2018) Some basic properties of cement board produced by using oil palm Empty Fruit Bunch (EFB) fibre. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 77-88. ISBN 978-967-2183-19-8

Abdul Hamid, Noor Azlina and Tengku Daeng Johar, Tengku Daeng Dinie Afiq and Salleh, Norhafizah and Ali, Noorwirdawati and Abdullah, Siti Radziah and Adnan, Suraya Hani and Jamellodin, Zalipah and Md. Noor, Nurazuwa and Othman, Nor Hazurina (2020) Flexural capacity of CFRP-strengthened reinforced concrete beam with circular web openings in flexure zone. In: Construction Materials and Technology. Penerbit UTHM, pp. 91-98. ISBN 978-967-2389-63-7

Adnan, Suraya Hani and A Roni, Norwardatun and Hamidon, Nuramidah and Tuan Ismail, Tuan Noor Hasanah (2020) The Characterization of Recycled Concrete Aggregate (RCA) as Vertical Filter For Removing Phosphorus. In: Sustainable Environmental Technology. Penerbit UTHM, pp. 23-32. ISBN 978-967-2389-33-0

Adnan, Suraya Hani and Ab Halim, Asyraf Hakim (2017) Effect of replacing fine aggregate and cement with lateritic soil and palm oil fuel ash (POFA) on the compressive and split tensile strength of concrete. In: Concrete Materials. Penerbit Uthm, Uthm, pp. 8-15. ISBN 978-967-0764-84-9

Adnan, Suraya Hani and Abd Roni, Norwardatun and Tuan Ismail, Tuan Noor Hasanah and Hamidon, Nuramidah (2020) The characterization of recycled concrete aggregate as filter in removal of phosphorus. In: Construction Materials and Technology. Penerbit UTHM, pp. 15-24. ISBN 978-967-2389-63-7

Adnan, Suraya Hani and Kosenin, Nini Azrin Amiera (2017) Performance of lightweight aggregates concrete with substitution of aluminum flakes as fine aggregates. In: Concrete Materials. Penerbit Uthm, Uthm, pp. 54-71. ISBN 978-967-0764-84-9

Ahmad Jeni, Mohamad Luthfi and Zaini, Mohamad Azrul (2018) Study on Palm Oil Kernel Shell Coarse Aggregate (PKSCA) as replacement material for coarse aggregate in concrete mix. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 49-64. ISBN 978-967-2183-19-8

Alshalif, A Faisal and Irwan, JM and Othman, N. and Al-Gheethi, AA (2020) Malaysia attempts in reduce carbon dioxide (CO2) emission and sequestration in bio-concrete system; a future direction. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 37-50. ISBN 978-967-2916-42-0

Ambok Lalak, Daing Muhammad Irfim and Osman, Mohamad Hairi and Wan Jusoh, Wan Amizah and A Rahman, Noor Khazanah and Adnan, Suraya Hani and Mohd Jeni, Mohd Luthfi and Hanipah, Mohd Hafizal and Yahya, Nur Faezah and Tami, Hannifah and Salim, Salman and Mat Nor, Ahmad Hakimi and Mat Nor, Ahmad Hakimi (2020) A simulation model of reinforced concrete beam containing expanded polystyrene beads (EPS) and palm oil fueled ash (POFA) using finile element method. In: Construction Materials and Technology. Penerbit UTHM, pp. 59-72. ISBN 978-967-2389-63-7

Chee Kang, Neo and Osman, Mohammad Hairi and Adnan, Suraya Hani (2018) Use of waste optical disc in concrete to promote Sustainable development in construction industry. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 123-138. ISBN 978-967-2183-19-8

Chong, Wen-Jing and Chan, Chee-Ming and Tuan Ismail, Tuan Noor Hasanah (2020) Geo-engineered dredged marine sediments via induced consolidation and heat treatment for reclamation works. In: Construction Materials and Technology. Penerbit UTHM, pp. 1-14. ISBN 978-967-2389-63-7

Hussain, Zahid and Md Noor, Nurazuwa (2020) A review on seawater as concrete composites and its effects on the strength and durability. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 91-101. ISBN 978-967-2916-42-0

Jamellodin, Zalipah and Soh, Ming Wei and Adnan, Suraya Hani and Abdul Hamid, Noor Azlina and Salleh, Norhafizah (2020) Nonlinear finite element analysis of reinforced concrete beams strengthened with textile fine grained mortar. In: Construction Materials and Technology. Penerbit UTHM, pp. 99-106. ISBN 978-967-2389-63-7

Keong, Tan Kok and Chee Ming, Chan and Abdul Rashid, Azrin Hani (2018) Protective coating for gabion wires against weathering elements and site conditions. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 105-122. ISBN 978-967-2183-19-8

Leman, Alif Syazani and Shahidan, Shahiron and Saiful Bahari, Nur Amira Afiza (2020) The suitability of coconut shell concrete as a replacements in term of mechanical and thermal properties – a review. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 1-13. ISBN 978-967-2916-42-0

Mazenan, Puteri Natasya and Sheikh Khalid, Faisal (2020) Properties of concrete containing coal bottom ash and fine coconut shell as partial sand replacement. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 51-66. ISBN 978-967-2916-42-0

Misri, Zainora and Wan Ibrahim, Mohd Haziman and Abdul Awal, A.S.M (2020) Properties of concrete containing recycled PET bottles as sand replacement. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 67-78. ISBN 978-967-2916-42-0

Mohd Fodzi, Muhammad Haikal and Ahmad Jeni, Mohamad Luthfi (2018) The study of used of ceramic industrial waste as replacement material of fine aggregate in concrete mix. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 89-104. ISBN 978-967-2183-19-8

Mohd Yassin, Nurain Izzati and Adnan, Suraya Hani and Shahidan, Shahiron and Ayop, Sallehuddin Shah (2020) Mechanical and durability performance of lightweight concrete brick with palm oil fuel ash (POFA). In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 14-25. ISBN 978-967-2916-42-0

Mohd Zailani, Tarmidzi and Adnan, Suraya Hani and Abdullah, Mohd Sufyan (2018) The performance on concrete brick containing Palm Oil Fuel Ash (POFA) as replacing cement. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 65-76. ISBN 978-967-2183-19-8

Mokhatar, ShahrulNiza and Hadipramana, Josef and Ibrahim, Shahiran Liyana and Kamarudin, Ahmad Fahmy (2020) Quantitative investigation of physical and mechanical properties of different artificial aggregate. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 116-134. ISBN 978-967-2916-42-0

Mokhtar, Norfaniza and Wan Jusoh, Wan Amizah and Mah Hassan, Muhammad Fitri (2020) Effectiveness of different curing media in self-healing process monitored by compressive strength and water absorption of cement mortar. In: Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020. Springer, pp. 247-257.

Osman, Mohamad Hairi and A.Rahman, Manisah (2017) Flexural behavior of reinforced concrete beams containing glass wastes as partial replacement of fine aggregate and cement. In: Concrete Materials. Penerbit Uthm, Uthm, pp. 82-92. ISBN 978-967-0764-84-9

Radzuan, Nurshafiqah and Ali, Noorwirdawati and Abdul Hamid, Noor Azlina and Salleh, Norhafizah (2020) Flexural strength of concrete prism strengthened using CFRP with modified mortar. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 102-115. ISBN 978-967-2916-42-0

Salleh, Norhafizah and Mohamad Hashim, Eny Nor Syahira and Abd Majid, Masni and Abdul Hamid, Noor Azlina and Ismail, Noorli and Ali, Noorwirdawati and Abdullah, Siti Radziah and Jamellodin, Zalipah and Adnan, Suraya Hani (2020) Cooling panel wall system with difference types of cooling mediums. In: Construction Materials and Technology. Penerbit UTHM, pp. 25-34. ISBN 978-967-2389-63-7

Soon Ern, Peniel Ang and Ali, Roslinda and Yang, Ooi Chee (2018) A study on schedule management for BIM projects in the construction industry. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 139-150. ISBN 978-967-2183-19-8

Soon Ern, Peniel Ang and Mei Ling, Lim (2018) Study on thermal performance of Precast Concrete Sandwich Panel (PCSP) design for sustainable built environment. In: Construction Materials and Technology Series. Penerbit Uthm, Uthm, pp. 31-48. ISBN 978-967-2183-19-8

Wan Jusoh, Wan Arnizah and Hanipah, Mohd Hafizal and Zakaria, Mohd Azuan and Pakir, Faizal and Adnan, Suraya Hani and Osman, Mohamad Hairi (2020) Technology of crack detection in reinforced concrete structures. In: Construction Materials and Technology. Penerbit UTHM, pp. 117-134. ISBN 978-967-2389-63-7

Wan Mohammad, Wan Ahmad Soffian and Abas, Nor Haslinda and Shahidan, Shahiron (2020) Investigation on the performance of crushed tires as cement replacement in concrete. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 26-36. ISBN 978-967-2916-42-0

Yahya, Nur Faezah and Abd Aziz, Nur Liyana and Osman, Mohamad Hairi and Tuan Ismail, Tuan Noor Hasanah and Adnan, Suraya Hani and A Rahman, Noor Khazanah and Abd Rashid, Razlin (2020) Coconut pith as partially replacement in sand brick. In: Construction Materials and Technology. Penerbit UTHM, pp. 35-44. ISBN 978-967-2389-63-7

Zaki, Zahir and Sheikh Khalid, Faisal and Shahidan, Shahiron (2020) Fine recycled concrete aggregate as a material replacement in concrete production. In: Advanced Concrete Technology and Green Materials. Penerbit UTHM, pp. 79-90. ISBN 978-967-2916-42-0

Conference or Workshop Item

Ab Zail, Nurul Fazilah and Adnan, Suraya Hani (2021) Sustainable concrete partially comprised of supplementary cementitious material and alternative fine aggregate- a review. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Iman, Afif and Mohamad, N and Raain, Fasya and Sofia, Anis and Mydin, Azree and Samad, A A A Properties and flexural behavior of self-compacting concrete with added coir fiber and POFA. In: 2nd Global Congress on Construction, Material and Structural Engineering (GCoMSE 2019), Aug 26, 2019 – Aug 27, 2019, Melaka, Malaysia.

Jamaludin, Liyana and Abd Razak, Rafiza and Abdullah, Mohd Mustafa Al Bakri and Kusbiantoro, Andri (2021) Geopolymer coating paste on concrete for photocatalytic performance. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

M, Sulzakimin and A., Adaji A. and A., Roy Hazli. and N. L., Mohammad Syabilee and O., Roshartini and M. R., Indera Syahrul and Z., Rozlin and I. Y., Ebenehi (2020) Assessing the level of community involvement in post-disaster housing reconstruction and current green design practices towards net-zero energy buildings. In: The 2nd Global Congress on Construction, Material and Structural Engineering, 26th to 27th of August 2019, Melaka, Malaysia.

M. S. N., Lee and Masrom, M. A .N. and Mohamed, S. and K. C., Goh and Sarpin, N. and Manap, N. (2020) Examining risk as guideline in design stage for green retrofits projects: a review. In: The 2nd Global Congress on Construction, Material and Structural Engineering, 26th to 27th of August 2019, Melaka, Malaysia. (In Press)

Mohd Sabtu, Saiful Bahari and Mohamad, Kamaruddin Malik Critical information infrastructure protection requirement for the Malaysia public sector. In: 2020 8th International Conference on Information Technology and Multimedia (ICIMU), 24-26 Aug. 2020, Selangor, Malaysia.

N I M, Yassin and S H, Adnan and S, Shahidan and S S, Ayop Strength and physical properties of concrete brick at elevated temperature. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19 - 20 December 2019, Le Grandeur Palm Resort, Johor Malaysia.

Sulzakimin, M. Sulzakimin and Masrom, M. A. N. and R., Hazli and Ahmodu, Adaji Adejah and Seow, T. W. and A. R., Mohd Hilmi Izwan (2020) Benefits for public healthcare buildings towards Net Zero Energy Buildings (NZEBs): initial reviews. In: The 2nd Global Congress on Construction, Material and Structural Engineering, 26th to 27th of August 2019, Melaka, Malaysia.

Book

Mohd Zuki, Sharifah Salwa and Mokhatar, Shahrul Niza and Shahidan, Shahiron and Wan Ibrahim, Mohd Haziman (2020) Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020. Springer. ISBN 978-981-16-2186-4

Thesis

Abdullah, Fatehi Mansoor Saad (2018) Study on mitigation factors for controlling cost overrun in construction project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nur Darina (2012) Modeling thermal model of a disk coil with directed oil flow using matlab software. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2019) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2019) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2018) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al Ameri, Abdulla Eissa Saleh (2021) Structural relationship model of causes and effects of construction changes in UAE construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Al-Shami, Mohammed Hamid (2019) Improving contractors’ practices of Industrialised Building System (IBS) implementation in construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alsaeedi, Yaser Abdulwahab Ali (2019) Perceptions of developers in green home project in Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Hassan (2020) Critical success factors model (CSF’sM) affecting the competencies of civil engineer in construction project. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kaliannan, Suaathi (2021) Structural equation modelling of construction waste root causes and waste generation rate in Malaysian construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruddin, Mohamad Sufian (2020) Performance of self-compacting concrete incorporating palm oil fuel ash and egg shell powder as partial cement replacement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Karunakaran, Priyadatchini (2020) The framework of direct and indirect effect of project risk response-related measures on project performance in managing construction delay. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Leman, Alif Syazani (2020) The properties of concrete containing coconut shell as fine aggregate. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Jusoh, Zairra (2018) A model of an effective materials management for better project performance in construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Misri, Zainora (2020) Physical, mechanical and thermal conductivity of concrete containing granulated recycled pet bottle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Noor Shuhada (2018) Flexural performance of textile fine grained mortar containing risk husk ash as a partial cement replacement in reinforced concrete beams. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Mohamad Ariff (2021) The effect of different industrialized building system (IBS) construction methods compared to the conventional method on occupational safety and health (OSH) industry risks in construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Siti Rahimah (2020) Critical success factor model framework for lean management application in industrialised building system (IBS) production. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sofberi, Nurul Atiqah (2021) Decision-making process framework at the planning phase of housing development project. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zainuri, Mohamad Izwan Saifudin (2021) Study on kenaf powder reinforced cement materials for concrete 3d printing process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Narendra raut, Ashwin (2017) Development of sustainable material for hybrid wall system to improve indoor thermal performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nasrullah, Alsad (2021) Experimental study of fracture energy for foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

Obeed, Wissam Mushina (2020) Development of timber concrete composite (TCC) beam with post-tensioning. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shadhar, Mohanad Hatem (2020) Numerical study on shear strengthening of reinforced concrete (RC) deep beams with and without stirrups using near-surface mounted FRP bars. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shahna, Ebrahim Awadh Mubarak (2018) Study on promote occupational safety and health practices in construction projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tarique, Muhammad (2021) Relationship between significant construction safety parameters and on site safety performance of high rise building in Karachi, Sindh Province, Pakistan. Masters thesis, Universiti Tun Hussein Malaysia.

Yaqoob, Mansoor Taha (2013) Transformer thermal model of the disk coils with non directed oil flow. Masters thesis, Universiti Tun Hussein Malaysia.

Zawawi, Mardhiah (2009) Effectiveness of industrialised building system (IBS) implementation for Malaysian Construction Industry. Masters thesis, Universiti Teknologi Malaysia.

Zid, Chaher (2020) Work safety behaviour model for improving safety in construction industry using Bayesian Network. Doctoral thesis, Universiti Tun Hussein Malaysia.

This list was generated on Thu Mar 28 23:50:54 2024 +08.