Items where Subject is "T Technology > TH Building construction"

A

A. Khalid, Nur Hafizah and Ismail, Mohammad and Mohd. Sam, Abd Rahman and Mohamed, Azman and A. Ismail, Mohamed and Jamellodin, Zalipah and Salleh, Norhafizah and A. Hamid, Noor Azlina and A. Majid, Masni (2018) Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash. Advanced Science Letters, 24 (6). pp. 3974-3977. ISSN 1936-6612

A. Rashid, Mohamad Syafiq and Chan, Chee Ming and Shaari, Muhammad Farid (2020) Structural analysis of long arm excavator boom for optimization performance under maximum breakout condition. In: Construction Materials and Technology. Penerbit UTHM, pp. 73-90. ISBN 978-967-2389-63-7

Abas, Nor Haslinda (2015) Development of a Knowledge-Based Energy Damage for evaluating Industrialised Building Systems (IBS) Occupational Health and Safety (OHS) Risk. Doctoral thesis, RMIT University.

Abas, Nor Haslinda and Noridan, Muhammad Ridhwan and Rahmat, Muhamad Hanafi and Abas, Nor Ain and Ibrahim, Nur Qamarina (2020) Causes of Accidents Involving Scaffolding at Construction Sites. Journal of Technology Management and Business, 7 (1). pp. 75-86. ISSN 2289-7224

Abd Hamid, Siti Nur Liyana and Kasim, Narimah and Zainal, Rozlin and Musa, Sharifah Meryam Shareh (2024) Potential of solid wall panel implementation for enhancing construction practices in affordable housing projects. In: RESEARCH IN MANAGEMENT OF TECHNOLOGY AND BUSINESS.

Abd Rahman, Norashidah and Khairuddin, Siti Amirah Azra and Jamaluddin, Norwati and Mohd Jaini, Zainorizuan (2018) Strength of reinforced fibrous foamed concrete-filled hollow section. 0255-5476, 936. pp. 219-223. ISSN 0255-5476

Abd. Kadir, Aslila (2022) The potential use of light pipe system as illumination element for one storey building in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Norashidah (2005) Static strength of tubular DT joints using lusas finite element software. Masters thesis, Universiti Teknologi Malaysia.

Abd. Wahab, Izudinshah and Ismail, Lokman Hakim and Abdullah, Abd Halid and Rahmat, Muhamad Hanafi and Abd Salam, Nur Nasuha (2018) Natural ventilation design attributes application effect on, indoor natural ventilation performance of a double storey, single unit residential building. International Journal of Integrated Engineering, 10 (2). pp. 7-12. ISSN 2229-838X

Abdul Hamid, Abdul Rahim and Mohd Khazid, Nur Inayah and Yunus, Riduan and A Halim, Hazruwani and Abdul Razak, Amall Raihan (2018) The emerging of employment gap in the Malaysian construction industry. Journal of Physics: Conference Series, 1049. pp. 1-8. ISSN 1742-6588

Abdul Hamid, Noor Azlina and Tengku Daeng Johar, Tengku Daeng Dinie Afiq and Salleh, Norhafizah and Ali, Noorwirdawati and Abdullah, Siti Radziah and Adnan, Suraya Hani and Jamellodin, Zalipah and Md. Noor, Nurazuwa and Othman, Nor Hazurina (2020) Flexural capacity of CFRP-strengthened reinforced concrete beam with circular web openings in flexure zone. In: Construction Materials and Technology. Penerbit UTHM, pp. 91-98. ISBN 978-967-2389-63-7

Abdul Hamid, Suhaila (2022) Development of occupational safety and health (OSH) performance management framework for industries in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Kafi, Akmal Arif and Hj Mohamed, Sulzakimin and Adaji, A A and Ebenehi, I Y (2020) Penyelenggaraan fasiliti stadium. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 149-169. ISBN 978-967-2389-96-5

Abdul Rahim, Nuraini and Hj Mohamed, Sulzakimin and Nikman Lee, Mohammad Syabilee and Abdellah, Roy Hazli (2020) Kerja baikpulih bangunan komersial yang terbengkalai di kawasan Melaka Tengah. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 1-21. ISBN 978-967-2389-96-5

Abdul Rahman, Mohammad Ashraf (2013) Model kejayaan utama amalan terbaik pengurusan penyenggaraan bangunan warisan di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Shukor, Shazmin Aniza (2004) Smart thermal comfort system: a development of the fundamental control algorithm. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Shukor, Shazmin Aniza (2004) Smart thermal comfort system: a development of the fundamental control algorithm. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Abd Halid (2007) A study on thermal environmental performance in atria in the tropics with special reference to Malaysia. Doctoral thesis, Heriot-Watt University.

Abdullah, Abd Halid and Yaman, Siti Khalijah and Mohammad, Hairuddin and Hassan, Padzil Fadzil (2018) Construction manager’s technical competencies in Malaysian construction projects. Engineering, Construction and Architectural Management, 25 (2). pp. 153-177. ISSN 0969-9988

Abdullah, Kamil and Mohamad, Mohd Hafiz (2018) Building energy performance a case study at G2 Building UTHM. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 161-169. ISSN 2289-7879

Abdurahman, Mohamad Niizar (2020) The performance of polyurethane grout to stabilise hemic peat. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Nor Athirah and Masrom, Md Asrul Nasid and Goh, Kai Chen (2020) Penyelenggaraan struktur penahan cerun rock shed: langkah mitigasi runtuhan tanah di Simpang Pulai - Blue Valley, Perak. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 42-61. ISBN 978-967-2389-96-5

Adeyemi, Adegbenga and Kasim, Rozilah and Martin, David (2017) The relevance of lean thinking to sustainable improvement of public office buildings in Nigeria. Journal of Engineering and Applied Sciences, 12 (6). pp. 1365-1376. ISSN 1816-949X

Adnan, Mohd Shalahuddin and Nda, Muhammad and Zakaria, Mohd Shazrin and Mohammad Razi, Mohd Adib and Suhadak, Mohamad Arif and Mohd Yusoff, Mohd Azlan and Rahmat, Siti Nazahiyah and Abustan, Muhammad Salleh and Ahmad Tajudin, Saiful Azhar (2018) Bedload sediment concentration of Sungai Kahang downstream Kahang dam in Johor. International Journal of Integrated Engineering, 10 (2). pp. 146-150. ISSN 2229-838X

Adnan, Suraya Hani and Abd Roni, Norwardatun and Tuan Ismail, Tuan Noor Hasanah and Hamidon, Nuramidah (2020) The characterization of recycled concrete aggregate as filter in removal of phosphorus. In: Construction Materials and Technology. Penerbit UTHM, pp. 15-23. ISBN 978-967-2389-63-7

Ahmad, Nur Darina (2012) Modeling thermal model of a disk coil with directed oil flow using matlab software. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmed, Fuad Hassan (2017) Improving construction materials management practices in construction sites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Jhatial, Ashfaque and Wan, Inn Goh and Mohamad, Noridah and Lee, Wai Hong and Lakhiar, Muhammad Tahir and Abdul Samad, Abdul Aziz and Abdullah, Redzuan (2018) The mechanical properties of foamed concrete with polypropylene fibres. International Journal of Engineering and Technology, 7 (3.7). pp. 411-413. ISSN 2227-524X

Ahmed Marey Alhammadi, Ahmed Salem (2022) Modeling the factors causing cost overrun in UAE construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmodu, Adaji Adejah (2019) Post disaster housing reconstruction framework for flood victims: Lokoja, Kogi State, Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alaa A., Shakir and Wan Ibrahim, M. H and Shahidan, S (2018) The effect of palm oil clinker and oil palm shell on the compressive strength of concrete. Iranian Journal of Science and Technology, Transactions of Civil Engineering, 43. pp. 1-14. ISSN 2228-6160

Alhaji Ali, Zannah and Ahmad Latiffi, Aryani and Raji, Abdulazeez Umar and Waziri, Abdullahi Abba and Mohammed, Usman (2017) Causes of low-skilled workers’ performance in construction projects. Traektoriâ nauki, 3 (6). pp. 1-15. ISSN 2413-9009

Ambok Lalak, Daing Muhammad Irfan and Osman, Mohamad Hairi and Wan Jusoh, Wan Amizah and A Rahman, Noor Khazanah and Adnan, Suraya Hani and Mohd Jeni, Mohd Luthfi and Hanipah, Mohd Hafizal and Yahya, Nur Faezah and Tami, Hannifah and Salim, Salman and Mat Nor, Ahmad Hakimi (2020) A simulation model of reinforced concrete beam containing expanded polystyrene beads (EPS) and palm oil fueled ash (POFA) using finite element method. In: Construction Materials and Technology. Penerbit UTHM, pp. 59-72. ISBN 978-967-2389-63-7

Ang Soon Ern, Peniel and Jong, Oi Ka and Safea’ai, Muhammad Aqerul and Mohd Saip, Muhammad Amirul Rasyid and Mohamed Salehin, Nur Ili Izyan (2022) AI vs. human mind: efficiency in the management of construction industry. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 34-40. ISBN 978-967-2817-40-6

Antonyová, Anna and Antony, Peter and Abdullah, Abdul Halid and Nagapan, Sasitharan and Daud, Zawawi and Abubakar, Mahmoud Hijab (2018) Certain building materials with respect to their thermal properties as well as to their impact to environment. International Journal of Integrated Engineering, 10 (4). pp. 126-130. ISSN 2229-838X

Apandi, Noramin (2023) Energy consumption and intensity at building construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arshad, Mohd Fadzil and Awang, Haryati and Putra Jaya, Ramadhansyah and Ali, Mohamad Idris and Mohd Yusak, Mohd Ibrahim and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman (2018) Effect of nano black rice husk ash on the chemical and physical properties of porous concrete pavement. Journal of Southwest Jiaotong University, 53 (5). pp. 1-6. ISSN 0258-2724

Asan, Amran (2017) Accident causation model for building construction sites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Zarizi and M. Yusof, Nuur Asyikin and Tajul Baharuddin, Mohamad Faizal and Hashim, Nor Haslina and Mohd Arish, Nur Aini and Abdul Rahman, Mohd Fahrni (2020) Potential application of LDPE plastic waste into tiles. In: Construction Materials and Technology. Penerbit UTHM, pp. 45-58. ISBN 978-967-2389-63-7

B

Bahar, Mohd Dzul Nizam Assrens and Sarpin, Norliana and Masrom, Md Asrul Nasid (2020) Kajian penyelenggaraan jalan raya disebabkan sink hole di Johor Bahru. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 120-148. ISBN 978-967-2389-96-5

Bhatti, Imtiaz Ali (2019) Measures for mitigating the delay in high-rise building construction projects in Dubai. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bhatti, Imtiaz Ali and Abdullah, Abd Halid and Nagapan, Sasitharan and Bhatti, Nabi Bux and Sohu, Samiullah and Ahmed Jhatial, Ashfaque (2018) Implementation of building information modeling (BIM) in Pakistan construction industry. Engineering, Technology & Applied Science Research, 8 (4). pp. 3199-3202. ISSN 1792-8036

Brahim, Juliana (2018) Development of a building information modelling (BIM) migration path model for construction professionals. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Buyung, Mohd Reduan and Shafii, Haryati and Buyung, Nurul Rezuana (2018) Construction of a concept of sustainable residential college in Malaysian public universities. International Journal of Academic Research in Business and Social Sciences, 8 (4). pp. 508-520. ISSN 2222-6990

Buyung, Mohd Reduan and Shafii, Haryati and Yusoff, Noor Ain (2018) Transformation to the sustainable living college concept at Public University Malaysia. Journal of Advanced Research in Social and Behavioural Sciences, 11 (1). pp. 34-49. ISSN 2462-1951

C

Chai, Teck Jung (2002) Keselesaan pelajar KUiTTHO terhadap penggunaan bangunan yang telah diubahsuai. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Chai, Teck Jung and Tang, Hing Kwong and Koh, Heng Boon (2018) Water absorption and drying shrinkage of recycled foamed aggregate concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 466-476. ISSN 2600-9498

Che Kamaruddin, Naadira (2010) Adequacy of contract provision in managing construction failure. Masters thesis, Universiti Teknologi Malaysia.

Chong, Wen-Jing and Chan, Chee-Ming and Tuan Ismail, Tuan Noor Hasanah (2020) Geo-engineered dredged marine sediments via induced consolidation and heat treatment for reclamation works. In: Construction Materials and Technology. Penerbit UTHM, pp. 1-14. ISBN 978-967-2389-63-7

D

Deraman, Rafikullah and Mustaffa, Rabiatul Syahindah and Ismail, Mohd Hanif and Hasmori, Muhammad Fikri and Nagapan, Sasitharan (2021) The effect of metakaolin in production of low thermal conductivity cement sand brick. In: Sustainable Waste Utilization in Bricks, Concrete, and Cementitious Materials. Springer Link, pp. 1-19.

Djamaluddin, Abdul Rachman and Caronge, Muhammad Akbar and Tjaronge, M. W. and Md. Noor, Nurazuwa and Rahim, Irwan Ridwan (2018) Abrasion resistance and compressive strength of unprocessed rice husk ash concrete. Asian Journal of Civil Engineering, 19. pp. 867-876. ISSN 1563-0854

F

Fayed Mogalli, Ali Hussein (2017) Integration of building information modelling (BIM) with materials management in construction project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Yusof, Badronnisa (2013) Sediment traps from synthetic construction site stormwater run off by grassed filter strip. Journal of Hydrology, 502 (NIL). pp. 53-61. ISSN 0022-1694

G

Gambo, Muhammad Mustapha (2011) A study of current design & build procurement approach practice based on the client‟s specific expectations in the Malaysian Construction Industry. Masters thesis, Universiti Tun Hussein Malaysia.

Goh, Hui Hwang and Goh, Kai Chen and Rashid, Rina and Syyi, Sim and Qing, Shi Chua and Lee, Sze Sing and Abdul Rahim, Ruzairi (2017) Reliable power system operation plan: steady state contingency analysis. International Journal of Integrated Engineering (IJIE), 9 (4). pp. 21-26. ISSN 2229-838X

Goh, Hui Hwang and Osman, Mohamed Dahir and Mohamed Basaleem, Omer and Qing, Shi Chua and Chin, Wan Ling and Goh, Kai Chen (2017) An overview of out-of-step protection in power systems. International Journal of Integrated Engineering (IJIE), 9 (4). pp. 13-20. ISSN 2229-838X

Goh, Kai Chen and Omar, Roshartini and Hj Mohamed, Sulzakimin (2020) Amalan keselamatan terhadap penyelenggaraan jentera untuk mengurangkan kemalangan di tapak bina. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 84-107. ISBN 978-967-2389-96-5

Goh, Kai Chen and Seow, Ta Wee and Omar, Roshartini and Sarpin, Norliana (2020) Penyelenggaraan dan faedah sistem penuaian air hujan (Spah). In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 120-148. ISBN 978-967-2389-96-5

H

Hamid, Nurul Hidayati (2013) Cabaran pelajar antarabangsa di Kolej Kediaman UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasmori, Muhammad Fikri and Said, Ilias and Deraman, Rafikullah and Abas, Nor Haslinda and Nagapan, Sasitharan and Ismail, Mohd Hanif and Khalid, Faisal Sheikh and Roslan, Ahmad Farhan (2018) Significant factors of construction delays among contractors in Klang Valley and its mitigation. International Journal of Integrated Engineering, 10 (2). pp. 32-36. ISSN 2229-838X

Hassan, Mohd Ikhmal Haqeem and Abdul Kadir, Aeslina and Sarani, Noor Amira and Abdo Al-Khadher, Sadeq Abdullah Configuration of Physical and Mechanical Characteristics of Fly Ash and Bottom Ash Replacement in Self-compacting Concrete (SCC). In: Sustainable Waste Utilization in Bricks, Concrete, and Cementitious Materials. Penerbit UTHM, pp. 1-11. (Submitted)

Hassen, Douread R. and Abdul Samad, Abdul Aziz and A. Azeez, Alyaa (2017) Strengthening of prism beam by using NSM technique with roots planted in concrete. International Journal of Engineering and Technology, 9 (5). pp. 383-386. ISSN 0975-4024

Hisham, Mohammad Fateh and Sarpin, Norliana and Omar, Roshartini and Mohamed, Sulzakimin and Md Gharip, Nor Hazlin and Ismayatim, Norddin (2024) Pengintegrasian building information modelling (BIM) dalam pengurusan rantaian bekalan bahan binaan dalam projek pembinaan. In: RESEARCH IN MANAGEMENT OF TECHNOLOGY AND BUSINESS.

I

Iberahim, Zuhaida (2002) Kesan penggunaan ABBM dalam mata pelajaran C 213 Teknologi Binaan dan Bahan : kajian kes di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Iberahim, Zuhaida (2002) Kesan penggunaan ABBM dalam mata pelajaran C 213 Teknologi Binaan dan Bahan: kajian kes di Politeknik Kota Bharu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Irfanullah, Irfanullah and Hasmoril, Muhammad Fikri and Mujtaba Hassan Memon, Mujtaba Hassan Memon and Ismail, Radzi (2023) Critical Factors and Mitigating Measures of Construction Delays of Pakistani Building Construction Projects. LNTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 14 (2). pp. 240-249. ISSN 2180-3242

Ismail, Hassan and Akasah, Zainal Abidin and Nagapan, Sasitharan and Khamis, Azme (2018) An investigation on benefits and future expectation of Industrialised Building System (IBS) implementation in construction practices. Advanced Journal of Technical and Vocational Education, 2 (2). pp. 12-18. ISSN 2550-2174

Ismail, Lokman Hakim (2007) An evaluation of bioclimatic high rise office buildings in a tropical climate: energy consumption and users' satisfaction in selected office buildings in Malaysia. Doctoral thesis, University of Liverpool.

Ismail, Zul-Atfi (2013) DMOSYS: defect-monitoring system for building maintenance at polytechnic. Masters thesis, Universiti Tun Hussein Malaysia.

J

Jaafar, Fareed (2003) Pembelajaran berbantukan komputer berasaskan laman web mata pelajaran penyamanan udara bagi tajuk beban haba. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Tezara, Cionita and Mohamad Hamdan, Mohammad Hazim and Rihayat, Teuku (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105. pp. 3437-3450. ISSN 0268-3768

Jamaluddin, Norwati and Yeoh, David and Abdul Ghani, Abdul Halim and Koh, Heng Boon and Shah Ayob, Sallehudin and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Tuan Chik, Tuan Norhayati and Abd. Ghafar, Nor Hayati (2018) A case study of residential buildings subjected to cracking failures. International Journal of Integrated Engineering, 10 (2). pp. 118-122. ISSN 2229-838X

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia.

Jamellodin, Zalipah (2005) Kegagalan struktur bumbung disebabkan oleh beban angin. Masters thesis, Universiti Teknologi Malaysia.

Jamellodin, Zalipah and Mohd Saman, Hamidah and Adnan, Suraya Hani and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and A. Majid, Masni and Salleh, Norhafizah (2018) Flexural behaviour of plain concrete prism strengthened by textile fine grained mortar. Advanced Science Letters, 24 (6). pp. 3982-3985. ISSN 1936-6612

Jamellodin, Zalipah and Nor Azhar, Norazreen and Jamaly, Mohamad Arif and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Ismail, Noorli and Adnan, Suraya Hani Adnan and Abdul Rashid, Nur Nadhirah (2018) Strength of blended cement mortar containing palm oil fuel and eggshell ashes. International Journal of Engineering & Technology, 7 (3.7). pp. 598-600. ISSN 2227-524X

Jamellodin, Zalipah and Soh, Ming Wei and Adnan, Suraya Hani and Abdul Hamid, Noor Azlina and Salleh, Norhafizah (2020) Nonlinear finite element analysis of reinforced concrete beams strengthened with textile fine grained mortar. In: Construction Materials and Technology. Penerbit UTHM, pp. 99-106. ISBN 978-967-2389-63-7

K

K. Ajeel, Raheem and W. Salim, W.S-I. and Hasnan, Khalid (2020) Numerical investigations of heat transfer enhancement in a house shapedcorrugated channel: combination of nanofluid and geometrical parameters. Thermal Science and Engineering Progress, 17. pp. 1-14. ISSN 2451-9049

Kamarudin, A. F. and Mokhatar, S. N. and Zainal Abidin, M. H. and Daud, M. E. and Rosli, M. S. and Ibrahim, A. and Ibrahim, Z. and Md Noh, M. S. (2018) Structural health monitoring on medium rise reinforced concrete building using ambient vibration method. In: IConCEES 2017, 4 - 5 December 2017, Langkawi, Malaysia.

Kamarudin, Mardziah (2002) Tinjauan terhadap tahap kesedaran keselamatan pekerja binaan dan kontraktor menurut persepsi pelajar semester V dan VI Diploma Kejuruteraan Awam di Politeknik Ungku Omar, Ipoh yang menjalani latihan industri di tapak bina. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kamarudin, Mardziah (2002) Tinjauan terhadap tahap kesedaran keselamatan pekerja binaan dan kontraktor menurut persepsi pelajar semester V dan VI Diploma Kejuruteraan Awam di Politeknik Ungku Omar, Ipoh yang menjalani latihan industri di tapak bina. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kamarudin, Mardziah (2002) Tinjauan terhadap tahap kesedaran keselamatan pekerja binaan dan kontraktor menurut persepsi pelajar semester V dan VI Diploma Kejuruteraan Awam di Politeknik Ungku Omar, Ipoh yang menjalani latihan industri di tapak bina. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Kasim, Rozilah and Umar, Muhammad Akilu and Ishak, Mohd Hafizal and Ariffin, Khadijah Md (2018) Framework development to identify the impact of green building attributes on rental value of commercial properties in Malaysia. Advanced Science Letters, 24 (5). pp. 3229-3233. ISSN 1936-6612

Khalid, F.S. and Irwan, J.M. and Ibrahim, M.H. Wan and Othman, N. and Shahidan, S. (2018) Splitting tensile and pullout behavior of synthetic wastes as fiber-reinforced concrete. Construction and Building Materials, 171. pp. 54-64. ISSN 0950-0618

Khalid, Layth Salman (2020) External factors affecting construction project performance in Iraq using pestle factors. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khoo, Weily and Koh, Ching Theng and Lim, Shing Chee (2017) Synthetic and Natural Fibrous Scaffolds for Soft Tissue Engineering Applications. Journal of Mechanical Engineering, 4 (3). pp. 223-233. ISSN 1823- 5514

Ku Adzman, Ku Nur Farzana and Saji, Nurdalila and Mohd Arish, Nur Aini (2020) A study of daylight optimization in building design in the student’s residential college of UTHM Pagoh. Journal Of Advanced Industrial Technology And Application, 1 (1). pp. 1-12. ISSN 2716-7097

L

L.A. Sofri, L.A. Sofri and D. Ganesan, D. Ganesan and M.M. Al B. Abdullah, M.M. Al B. Abdullah and Chee-Ming Chan, Chee-Ming Chan and M.H. Osman, M.H. Osman and J. Garus, J. Garus and S. Garus, S. Garus (2024) The Effect of Recycled High-Density Polyethylene (HDPE) as an Additional Binder in Porous Asphalt Pavement. -, 69 (1). pp. 289-295.

Lee, Chin Ying and Kasim, Narimah and Zainal, Rozlin and Abd Rahim, Mohd Hilmi Izwan (2024) Relationship between skill requirements and challenges of internet of things (IoT) Implementation in construction project. In: RESEARCH IN MANAGEMENT OF TECHNOLOGY AND BUSINESS.

Lee, Yeong Huei and Lim, Ming Han and Lee, Yee Ling and Lee, Yee Yong and Tan, Cher Siang and Mohammad, Shahrin and Ma, Chau Khun (2018) Compressive strength of lightweight foamed concrete with charcoal as a sand replacement. Indian Journal of Engineering and Materials Sciences, 25 (1). pp. 98-108. ISSN 0971-4588

Lim, Ai Nee and Kasim, Narimah and Musa, Sharifah Meryam Shareh and Mohd Noh, Hamidun (2024) Implementation of artificial intelligence for labour controlling in the construction site. In: RESEARCH IN MANAGEMENT OF TECHNOLOGY AND BUSINESS.

M

M, Omeje and O. Olusegun, Adewoyin and S. Joel, Emmanuel and C. O., Ehi-Eromosele and PraiseGod, Emenike C. and M. R, Usikalu . and Sayo A., Akinwumi and E., Zaidi and Saeed, Mohammad A. (2018) Natural radioactivity concentrations of 226Ra, 232Th, and 40K in commercial building materials and their lifetime cancer risk assessment in dwellers. HUMAN AND ECOLOGICAL RISK ASSESSMENT, 24 (8). pp. 2036-2053. ISSN 1080-7039

M. Hamdan, M. H. and Siregar, J. P. and Sapuan, S. M. and Tezara, C. and M. Hafizi, Z. and M. Rejab, M. R. and Bachtiar, D. and Jamiluddin, J. (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. Unsaturated Polyester Resins. pp. 489-514.

M.H. Osman, M.H. Osman and L.Y. Chin, L.Y. Chin and S.H. Adnan, S.H. Adnan and M.L.M. Jeni, M.L.M. Jeni and W.A.W. Jusoh, W.A.W. Jusoh and S. Salim, S. Salim and Rahim, Nur Liza and J.J. Wysłocki, J.J. Wysłocki (2024) The behaviour of Reinforced Concrete Beams by Using Expanded Polystyrene Beads and Palm Oil Fuel Ash as Replacement Materials. Arch. Metall. Mater, 69 (1). pp. 359-364.

Madun, Aziman and Wijeyesekera, Devapriya Chitral and Ahmad Tajuddin, Saiful Azhar and Zainalabidin, Mohd Hazreek and Yunus, Riduan and Tajul Baharudin, Mohamad Faizal (2017) Characterisation of lateral and vertical subsurface heterogeneity in the ground using sustainable seismic surface wave methodology. Journal of Physics: Conference Series, 25 (NIL). pp. 169-176. ISSN 1742-6588

Mahamud, Nurbaity Aqmar (2011) Pengukuran prestasi pemaju perumahan berdasarkan sistem star rating. Masters thesis, Universiti Tun Hussein Malaysia.

Mangi, Sajjad Ali and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Shahidan, Shahiron and Arshad, Mohd Fadzil and Memon, Sheeraz Ahmed and Putra Jaya, Ramadhansyah and Mudjanarko, Sri Wiwoho and Setiawan, Muhammad Ikhsan (2018) Influence of ground coal bottom ash on the properties of concrete. International Journal of Sustainable Construction Engineering and Technology (IJSCET), 9 (2). pp. 2180-3242. ISSN 2180-3242

Mat Jusoh, Zairra and Kasim, Narimah (2017) Influential factors affecting materials management in construction projects. International Journal of Integrated Engineering, 8 (4). pp. 82-90. ISSN 2082-1344

Md Ariffin, Khadijah (2015) Framework for the audit process implementation on public buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Piah, Mohd Fauzi (2003) Garis panduan keselamatan dan kesihatan pekerja di tapak bina bagi kontraktor binaan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md Piah, Mohd Fauzi (2003) Garis panduan keselamatan dan kesihatan pekerja di tapak bina bagi kontraktor binaan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Md. Ali, Massofia and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Abas, Nor Ain (2018) Factors impeding the industrialized building system (IBS) implementation of building construction in Malaysia. International Journal of Engineering & Technology, 7 (4). pp. 2209-2212. ISSN 2209-2212

Md. Nasir, Muhamad Nadjmi and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah and Yusop, Fatimah Mohamed and Adnan, Suraya Hani and Abdullah, Nor Maizzaty and Mat Hassan, Nik Normunira (2022) A review of riverbank and coastal erosion protection structure. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 41-55. ISBN 978-967-2817-40-6

Md. Noh, M. S. and Kamarudin, A. F. and Mokhatar, S. N. and Jaudin, A. R. and Ahmad, Z. and Ibrahim, A. and Muhamad, A. A. (2018) Axial compression behaviour of reinforced wallettes fabricated using wood-wool cement panel. In: IConCEES 2017, 4 - 5 December 2017, Langkawi, Malaysia.

Md. Yassin, Azlina and Musa, Sharifah Meryam Shareh and Shafii, Haryati (2018) To study an awareness on sustainable green building practices amongst construction industry players. The Journal of Social Sciences Research, 6. pp. 1033-1040. ISSN 2413-6670

Moftah Solla, Mohamed N (2018) Building information modeling (BIM) and green building index (GBI) assessment framework for non-residential new construction building (NRNC). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Noridah and Goh, Wan Inn and Samad, A.A.A. and Lockman, A. and Hadipramana, Josef (2017) Structural behaviour of beam with HDPE plastic balls subjected to flexure load. Materials Science Forum, 889 (NIL). pp. 270-274. ISSN 0255-5476

Mohamed, Sulzakimin and Maiden, Muhammad Hanif (2020) Impak pengorekan pasir sungai terhadap alam sekitar di Sungai Skudai, Johor. In: Dilema pengurusan persekitaran pembinaan. Penerbit UTHM, pp. 23-48. ISBN 978-967-2389-73-6

Mohammad, Hairuddin (2009) Quality and satisfaction of house owners for industrialised building system and conventional building system. Masters thesis, Universiti Teknologi Malaysia.

Mohammed Hauashdh, Ali Hamid (2022) Development an integrated strategic framework for critical influential issues on building maintenance success in Malaysian Public Universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Usman, Abdullahi (2019) Development of carbon footprint quantification and reduction (cafquar) assessment tool for selected non-residential buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Aripen, Nur Shahirah and Abu Bakar Sidik, Dilaeleyana and Mohd Ismail, Nurul Izzati and Mohd Ghazali, Jamilah and Mohd Adnan, Raudah and Zahari, Nur Afiqa Zuriati and Rosli, Nur Farah Aina and Rahmat, Ainol Atira (2020) Paper making from bagasse. In: Application in Science and Technology. Penerbit UTHM, pp. 1-7. ISBN 978-967-2389-55-2

Mohd Azaman, N.A. and Abd Ghafar, N.H. and Azhar, A.F. and Fauzi, A. A. and Ismail, H. A. and Syed Idrus, S. S. and Mokhjar, S. S. and Abd Hamid, F.F. (2018) Investigation of concrete floor vibration using heel-drop, test. Journal of Physics: Conference Series, 995. pp. 1-8. ISSN 1742-6588

Mohd Bakri, Muhammad Hassan (2008) The comparison between conventional and industrialized building system formwork towards sustainable construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Siti Rahimah and Yunus, Riduan and Abdullah, Abd Halid and Nagapan, Sasitharan and Syahir Syed Mazlan, Syed Mohamad (2018) Insights into the adoption of lean management in industrialised building system (IBS) implementation: the drivers and challenges. International Journal of Engineering & Technology, 7 (3.23). pp. 22-31. ISSN 2227-524X

Mohd Sari, Kamarul Aini (2003) Kajian keselesaan terma di penginapan pelajar Universiti Sains Malaysia. Masters thesis, Universiti Sains Malaysia.

Mohd Sari, Kamarul Aini (2003) Kajian keselesaan terma di penginapan pelajar Universiti Sains Malaysia. Masters thesis, Universiti Sains Malaysia.

Mohd Wahidi, Nur Nadia Natasha and Masek, Alias (2021) Automatic environmental control system of grey oyster mushrooms house. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 70-78. ISBN 978-967-2817-45-1

Muhammad Isradi, Muhammad Isradi and Joewono Prasetijo, Joewono Prasetijo and Yudi Dwi Prasetyo, Yudi Dwi Prasetyo and Nurani Hartatik, Nurani Hartatik and Andri Irfan Rifai, Andri Irfan Rifai (2023) PREDICTION OF SERVICE LIFE BASE ON RELATIONSHIP BETWEEN PSI AND IRI FOR FLEXIBLE PAVEMENT. Proceedings on Engineering Sciences, 5 (2). pp. 267-274.

Muktar Ishaq, Ishaq and Omar, Roshartini and Mohammed, Musa (2018) Challenges of communication between the client and contractor during construction projects: the Nigerian perspective. International Journal of Engineering and Modern Technology, 4 (2). pp. 20-29. ISSN 2504-8856

Musa, Hishamudin (2003) Penghasilan modul keselamatan dan kesihatan pekerja di tapak bina bagi pelajar-pelajar kejuruteraan awam di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Musa, Hishamudin (2003) Penghasilan modul keselamatan dan kesihatan pekerja di tapak bina bagi pelajar-pelajar kejuruteraan awam politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Musa, Mohd Kamaruzaman (2022) Pembangunan instrumen penilaian pasca penghunian bagi perumahan bertingkat yang dibina menggunakan kaedah sistem binaan industri. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

N

Ng, Ban Huat and Akasah, Zainal Abidin (2013) Post occupancy evaluation of energy-efficient buildings in Tropical climates – Malaysia. International Journal of Architectural Research, 7 (2). pp. 8-12. ISSN 2631-6862

Ng, Chee Seng (2013) A study of the effectiveness of local exhaust ventilation (LEV) in training facilities building using computational fluid dynamics (CFD) approach. Masters thesis, Universiti Tun Hussein Malaysia.

Ngadengon, Rafidah and Tomari, Razali Md and Hamdan, Rohaiza and Ngadengon, Zuraihah and Mat Akir, Rohaida Stabilization of inverted pendulum system using discrete sliding mode control. Journal of Advanced Research In Dynamical and Control Systems, 11 (12). pp. 75-81. ISSN 1943-023X

Ngah Nasaruddin, Nur Ain (2019) Model of leadership characteristics in addressing construction challenges. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nor Haslinda, A. and T., Wei Xian and K., Norfarahayu and Rahmat, Muhamad Hanafi and Hasmori, Muhammad Fikri (2018) Investigation on the factors influencing construction time and cost overrun for high-rise building projects in Penang. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

O

Othuman Mydin, Md Azree and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Mahmood Abdal Qaidi, Shaker and Awoyera, Paul Oluwaseun (2023) Durability Properties of Lightweight Foamed Concrete Reinforced With ‘Musa Acuminate’ Fibre. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 145-158. ISSN 2462-1943

P

Putra Jaya, Ramadhansyah and Che Wan, Che Norazman and Hainin, Mohd Rosli and Mohd Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd Fadzil (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X

Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman and Nazri, Fadzli Mohamed and Arshad, Mohd Fadzil and Muthusamy, Khairunisa (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-168. ISSN 2229-838X

R

R Alriwaimi, Hani Muftah (2018) Critical success factors model for residential building maintenance in Libya. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rageh Gamil, Yaser Mohammed (2020) Causes and effects of poor communication in construction projects. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rahmat, Noor Idirah (2016) Success factors for bumiputra contractors in Malaysia : Johor state. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rajendran, Punitha (2015) The impact of building information modeling (BIM) to architechtural design process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rajendran, Punitha (2015) The impact of building information modeling (BIM) to architectural design process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raji, Abdulazeez Umar (2017) Competency-driven benefits realization model for minimization of post-contract transaction costs in design-build (d&b) delivery systems. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, M Z and Malek, M A and Hanipah, M. H. and Lin, C L and Mahamad Sukri, M F and Zawawi, M H and Zainal Abidin, M Z and Mohamad Fuad, N F S (2018) Study of factors influencing construction delays at rural area in Malaysia. International PostGraduate Conference on Applied Science & Physics. pp. 1-8. ISSN 1742-6588

Rasib, Abd Wahid and Mohd Ali, Hamzah and Alvin, L.M.S. and Kanniah, K.D. and Idris, Nurul Hawani and Omar, Hamdan and Dollah, Rozilawati and Ahmad, Mustaffa Anjang (2018) Upscaling aboveground biomass estimation at low-land royal belum forest reserve using unmanned aerial vehicle image. International Journal of Integrated Engineering, 10 (4). pp. 140-150. ISSN 2229-838X

Rassiah, Kannan and Megat Ahmad, M. M. H. and Ali, Aidy and Abdullah, Abd Halid and Nagapan, Sasitharan (2018) Mechanical properties of layered laminated woven bamboo gigantochloa scortechinii/epoxy composites. Journal of Polymers and the Environment, 26 (4). 1328 - 1342. ISSN 1566-2543

Robin, Rolyselra Orbintang (2017) Kajian terhadap kos pembinaan rumah kos rendah di Sarawak. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslee, Faiza and Mohd Kamil, Nor Amani Filzah and Abd Kadir, Aeslina (2017) Potential of ground and unground palm oil fuel ash in construction material. International Journal of Integrated Engineering, 3 (1). pp. 1-4. ISSN 2229-838X

S

Saleh Almansoori, Maitha Taher (2022) Structural model of factors affecting pmo performance in uae mega construction projects. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Norhafizah and Mohamad Hashim, Eny Nor Syahira and Abd Majid, Masni and Abdul Hamid, Noor Azlina and Ismail, Noorli and Ali, Noorwirdawati and Abdullah, Siti Radziah and Jamellodin, Zalipah and Adnan, Suraya Hani (2020) Cooling panel wall system with difference types of cooling mediums. In: Construction Materials and Technology. Penerbit UTHM, pp. 25-33. ISBN 978-967-2389-63-7

Salleh, Norhafizah and Mohd Sam, Abdul Rahman and Mohd Yatim, Jamalludin and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and Jamellodin, Zalipah and A. Majid, Masni (2018) Effect of CFRP plate length on flexural behavior of GFRP reinforced concrete beam strengthening. Advanced Science Letters, 24 (6). pp. 3968-3973. ISSN 1936-6612

Sallehuddin, Aina Mardia (2022) Development framework of work stress and technology absorptive capacity relationship among small and medium-sized enterprises (SMEs) in construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Santoso, Teguh Iman (2019) Kerangka kompetensi “k-workers” industri di Batam. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sarpin, Norliana and Bahar, Mohd Dzul Nizam Assrens and Goh, Kai Chen and Omar, Roshartini (2020) Isu dan masalah sink hole terhadap penyelenggaraan jalan raya di Johor Bahru. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 22-41. ISBN 978-967-2389-96-5

Sazali, Norsuhailizah and Harun, Zawati and Sazali, Norazlianie (2020) A review on batch and column adsorption of various adsorbent towards the removal of heavy metal. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 67 (2). pp. 66-88. ISSN 2289-7879

Shahidan, S. and Ranle, N. A. and Mohd Zuki, S. S. and Khalid, F. Sheikh and Ridzuan, A. R. M. and Nazri, F. M. (2018) Concrete incorporated with optimum percentages of recycled Polyethylene Terephthalate (PET) bottle fiber. International Journal of Integrated Engineering, 10 (1). pp. 1-8. ISSN 2229-838X

Sohu, Samiullah and Abdullah, Abd Halid and Nagapan, Sasitharan and Ali Buriro, Ahsan and Kaleemullah, K. (2018) Stakeholders’ perception on critical cost variation factors in Malaysian building projects. Civil Engineering Journal, 4 (9). pp. 2075-2081. ISSN 2476-3055

Subramaniam, Shivaraj and Abdullah, Abd Halid and Nagapan, Sasitharan and Kupusamy, Kumanan and Manian, Haritharan and Daud, Zawawi (2018) Investigate how construction waste generation rate is, different for every types of project in peninsular Malaysia, using site visit method. International Journal of Integrated Engineering, 10 (1). pp. 150-156. ISSN 2229-838X

Sulaiman, Nurul Nabila and Omar, Abdul Jalil and Pakir, Faizal and Mohamad, Marlina (2024) Evaluating Environmental, Social and Governance (ESG) Practice Among Malaysian Public Listed Construction Companies Using FTSE Russell Rating Model. INTERNATIONAL JOURNAL OF SUSTAINABLE CONSTRUCTION ENGINEERING AND TECHNOLOGY, 15 (1). pp. 25-40. ISSN 2180-3242

Supar, Khairi and Hisyamudin, Nur Atiqah Izzati and Muhamad Amin Abdulla, Muhammad Nurarif Amsyar and Mohd Noor, Nurul Fatin Shazwani and Idris, Nur'Ain and Ahmad, Hilton (2024) The development of IBS structure panel using revit software. In: MULTIDISCIPLINARY APPLIED RESEARCH AND INNOVATION.

T

T. Chik, T. N. and Kamil, M. R. H. and Yusoff, N. A. and W. Ibrahim, M. H. Dynamic analysis of an office building due to vibration from road construction activities. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Tan, Yee Ling and Mohamed, Sulzakimin and Adaji, Adejoh Ahmodu (2024) Usage of BIM for improvement on design coordination in construction industry. In: RESEARCH IN MANAGEMENT OF TECHNOLOGY AND BUSINESS.

Teddy, T. and J.M., Irwan and Othman, N. and Gani, P. (2018) Bio-concrete on chloride condition: effect on compressive strength and water penetration. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 129-140. ISSN 2590 - 4140

Teuku Muhammad Johan, Teuku Muhammad Zulfadly (2017) Factor of work accident in Indonesian construction site: Medan, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tey, Jia Sin (2019) Enhancing the evaluation process of sustainability related criteria in Malaysia landfill site selection. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Chik, Tuan Norhayati (2022) Assessment and optimisation of human walking and traffic induced vibration of floors in office buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Ismail, Tuan Noor Hasanah and Yuriz, Yasmin and Yahya, Nur Faezah and Adnan, Suraya Hani and Mat Hassan, Nik Normunira and Wan Jusoh, Wan Amizah and Abdul Rahman, Mohd Fahrni (2020) Soil reinforcement with synthetic and natural fibres: a review. In: Construction Materials and Technology. Penerbit UTHM, pp. 107-116. ISBN 978-967-2389-63-7

U

Ullah, Kaleem (2018) Mitigation measures for critical factors causing cost overrun in Malaysian building projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Chik, Wan Muhammad Eddie Khusyairi and Mokhatar, Shahrul Niza and Othman, Nor Hazurina and Albshir Budiea, Ahmed Mokhtar and Muthusamy, Khairunisa (2024) The Exploration of the Characteristics of Concrete Incorporating Ultrafine Coal Bottom Ash and Spent Garnet. Journal of Advanced Research in Applied Sciences and Engineering Technology, 36 (2). pp. 164-175. ISSN 2462-1943

Wan ]usoh, Wan Amizah and Hanipah, Mohd Hafizal and Zakaria, Mohd Azuan and Pakir, Faizal and Adnan, Suraya Hani and Osman, Mohamad Hairi (2020) Technology of crack detection in reinforced concrete structures. In: Construction Materials and Technology. Penerbit UTHM, pp. 117-134. ISBN 978-967-2389-63-7

Y

Yahya, Nur Faezah and Abd Aziz, Nur Liyana and Osman, Mohamad Hairi and Tuan Ismail, Tuan Noor Hasanah and Adnan, Suraya Hani and A Rahman, Noor Khazanah and Abd Rashid, Razlin (2020) Coconut pith as partially replacement in sand brick. In: Construction Materials and Technology. Penerbit UTHM, pp. 35-44. ISBN 978-967-2389-63-7

Yasin, Mohd Norazam and Abdullah, Abdul Halid and Wan Ibrahim, Mohd Haziman and Abdul Khalid, Hafizah and Wahab, Nur Shahirah Nadhilah (2018) A study of potential retroffiting existing Sultan Ibrahim heritage building to green building. Advanced Science Letters, 24 (5). pp. 3213-3216. ISSN 1936-6612

Z

Zainal Abidin, Ahmad Sayuti (2015) Background concentration of airborne microbe in new constructed building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Mohamad Hibatullah and Hj Mohamed, Sulzakimin and Masrom, Md Asrul Nasid (2020) Perbandingan kepuasan penghuni terhadap penyelenggaraan fasiliti perumahan bertingkat di Pantai Dalam Kuala Lumpur. In: Penyelenggaraan & Baikpulih - Alam Bina. Penerbit UTHM, pp. 62-83. ISBN 978-967-2389-96-5

Zakaria, Noor Shazliza (2013) Rice husk/dust air particle sensor using zigbee wireless sensor network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zawawi, Mardhiah (2009) Effectiveness of industrialised building system (IBS) implementation for Malaysian Construction Industry. Masters thesis, Universiti Teknologi Malaysia.

Zulkifli, Fahir and Mokhatar, Shahrul Niza and Tuan Chik, Tuan Norhayati and Seyed Hakim, Seyed Jamalaldin and Mohammadhassani, Mohammad (2024) A Study of Building Structure Resilience to Seismic in the Batu Pahat Area using Rapid Visual Screening Method. Journal of Advanced Research in Applied Sciences and Engineering Technology, 36 (2). pp. 147-163. ISSN 2462-1943

Zuraidi, Siti Nor Fatimah (2014) Model rangka kerja pemuliharaan struktur fabrik bagi bangunan bersejarah. Masters thesis, Universiti Tun Hussein Onn Malaysia.