Items where Year is 2011

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | E | G | H | I | J | K | L | M | O | P | R | S | T | W | Y | Z
Number of items: 111.

A

A. Rahim, Erween and Sasahara, Hiroyuki (2011) An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under, MQL condition. Machining Science and Technology: An International Journal, 15 (1). pp. 76-90. ISSN 1091-0344

A. Rahman, Khairul Azlan (2011) The development of mobile robot for air pollution data capture (POPOBOT). Masters thesis, Universiti Tun Hussein Malaysia.

Abd Shaib, Mohd Fadzli and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Abd Jamil, Mahadi and Leow, Pei Ling (2011) An overview: effectiveness of different arrangement for electrode guard in electrical capacitance tomography. Sensors & Transducers Journal, 135 (2). pp. 20-26. ISSN 1726-5479

Abdul Rahim, Mohd Salleh (2011) Bottleneck-based heuristic for three-machine flow shop scheduling. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Rahman, Azman (2011) Liquid mixture control system using PLC. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Sabirin (2011) Observations of f-region critical frequency variation over Batu Pahat, Malaysia during low solar activity. Masters thesis, Universiti Tun Hussein Malaysia.

Adnan, Mohd Shalahuddin (2011) Development and evaluation of indices to assess the ecological health of the Pahang River, Malaysia. Doctoral thesis, Kyushu University.

Ahmad, Azmi (2011) Effectiveness of learning transfer in National Dual Training System (NDTS). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Azmi (2011) Effectiveness of learning transfer in national dual training system (NDTS). Doctoral thesis, Universiti Tun Hussein Malaysia.

Ahmad, Mohd Khairul Ikhwan (2011) Multifingered robot hand robot operates using teleoperation. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad Zahari, Nurul Huda (2011) A security payment model for financial payment using mykad. Masters thesis, Universiti Tun Hussein Malaysia.

Ainuddin, Ainun Rahmahwati and Hakiri, Norio and Muto, Hiroyuki and Sakai, Mototsugu and Matsuda, Atsunori (2011) Mechanical properties comparison of phenylsilsesquioxane–methylsilsesquioxane hybrid films by indentation. Journal of the Ceramic Society of Japan, 119 (6). pp. 490-493. ISSN 1348-6535

Al Aian, Ahmad Eshtiwey (2011) The aerodynamics analysis of type UAV aircraft with pusher engine configuration by use of DATCOM software. Masters thesis, Universiti Tun Hussein Malaysia.

Al-Rawachy, Ehab Esam Dawood (2011) Design of microstrip patch antenna for IEEE 802.16-2004 applications. Masters thesis, Universiti Tun Hussein Malaysia.

Alnatit, Nabil Mohamed Emhdab (2011) Computational study on shear strengthening of RC continuous beams using CFRP sheet. Masters thesis, Universiti Tun Hussein Malaysia.

Altaher Mohamed, Mohamed Abdalwahab (2011) A comparative study fourth order runge kutta-tvd Scheme and fluent software case of inlet flow problems. Masters thesis, Universiti Tun Hussein Malaysia.

Ambak, Kamarudin (2011) Pemodelan persamaan struktur dalam intervensi kelakuan penggunaan topi keledar dengan betul. Doctoral thesis, Universiti Kebangsaan Malaysia.

Ambak, Kamarudin and Ismail, Rozmi and Rahmat, Riza Atiq Ok and Shokri, Foad (2011) Do Malaysian motorcyclists concern to safety helmet usage: a cross-sectional survey. Journal of Applied Sciences, 11 (3). pp. 555-560. ISSN 1812-5654

Arbaiy, Nureize and Ab Rahman, Hamijah and Mohd Salikon, Mohd Zaki and Pei, Chun Lin (2011) Workplace safety risk assessment model based on fuzzy regression. Advanced Science Letters, 4. pp. 400-407. ISSN 1936-6612

B

Borhan, Muhamad Nazri and Ismail, Amiruddin and Rahmat, Riza Atiq O.K. and Ambak, Kamarudin (2011) Effect of transport policies to shifting private car users to park-and-ride in Putrajaya, Malaysia. Australian Journal of Basic and Applied Sciences, 5 (3). pp. 303-308. ISSN 1991-8178

C

Charles, Udechukwu Chukwuemeka (2011) Power quality analysis and mitigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chee, Kwok Chien (2011) FSI analysis of artery suffering atherosclerosis. Masters thesis, Universiti Tun Hussein Malaysia.

Chin, Fhong Soon (2011) Development of a novel cell traction force transducer based on cholesteryl ester liquid crystals: characterisation, quantification and evaluation of a cholesteryl ester liquid crystal based single cell force transducer system. Doctoral thesis, University of Bradford.

E

El-Shami, Ibtihal Fawzi (2011) Shielding effectiveness of mesh wire for 50Hz magnetic field. Masters thesis, Universiti Tun Hussein Malaysia.

G

Gambo, Muhammad Mustapha (2011) A study of current design & build procurement approach practice based on the client‟s specific expectations in the Malaysian Construction Industry. Masters thesis, Universiti Tun Hussein Malaysia.

H

H. Ali, Mohamed (2011) Mixture characteristics of buton rock asphalt. Masters thesis, Universiti Tun Hussein Malaysia.

Hassan, Noor Haslyena (2011) Study of using three dimensional printer for EDM electrode fabrication. Masters thesis, Universiti Tun Hussein Malaysia.

Hossain, M.Z. and Abdul Awal, A.S.M. (2011) Experimental validation of a theoretical model for flexural modulus of elasticity of thin cement composite. Construction and Building Materials, 25 (NIL). pp. 1460-1465. ISSN 0950-0618

Hossain, Md. Zakaria and Abdul Awal, A.S.M. (2011) Flexural response of hybrid carbon fiber thin cement composites. Construction and Building Materials, 25 (2). p. 670. ISSN 0950-0618

I

Ibrahim, Mohd Tarmizi (2011) Line and wall follower hexapod robot. Masters thesis, Universiti Tun Hussein Malaysia.

Imran, Nik Farhanim (2011) Tensile force and bond stress of longitudinal reinforcemenet in heavily reinforced concrete beam. Masters thesis, Universiti Tun Hussein Malaysia.

J

Jalil, Azlis Sani and Md Dawal, Siti Zawiah and Mohd Zakwan, Norhayati and Hasnan, Khalid (2011) Sleepiness among train drivers: a case study in Malaysia. Malaysian Journal of Ergonomics. pp. 23-32.

Jamian, Saifulnizan and Sato, Hisashi and Fujiwara, Eri Miura and Watanabe, Yoshimi (2011) Finite element analysis of severe plastic deformation of difficult-to-work material by equal-channel angular pressing at ambient temperature. Japanese Journal of Applied Physics, 50 (1). pp. 1-5. ISSN 0021-4922

Jeonmani, Sherinatasha (2011) Programmable velocity profile for wheeled mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Junoh, Husin (2011) Faktor keruntuhan akhlak remaja Islam luar bandar di Daerah Kota Tinggi, Johor. Doctoral thesis, Universiti Malaya.

K

KSM Kader Ibrahim, Babul Salam (2011) Modelling and control of paraplegic’s knee joint (fes-swinging). Doctoral thesis, University of Sheffield.

Kek, Sie Long (2011) Integrated optimal control and parameter estimation algorithms for discrete-time nonlinear stochastic dynamical systems. Doctoral thesis, Universiti Teknologi Malaysia.

Khaerudini, Deni Shidqi (2011) Development of nanocrystalline ironchromium alloy by means of sintering and ion implantation for interconnect application in high-temperature solid oxide fuel cells. Masters thesis, Universiti Tun Hussein Malaysia.

L

Lais, Jais (2011) Study on application of UV-processed molecular alignment in liquid crystal devices. Doctoral thesis, Nagaoka University of Technology.

Leman, Abdul Mutalib (2011) Development of industrial air pollution monitoring system for safety and health enhancement and sustainable work environment in small and medium industries (SMI's). Doctoral thesis, Universiti Teknologi MARA.

M

M Mohammed, Abdelrazzak Gumaa (2011) The application of combined momentum and blade element theory for aerodynamics performance analysis of rotating blades. Masters thesis, Universiti Tun Hussein Malaysia.

M. Gelim, Khalid. Ali. (2011) Mechanical and physical properties of fly ash foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

M.F., Akhmazillah and M. R., Sarmidi and L., S. Chua (2011) Metabolite profiling of heat treated whole palm oil extract. Asian Journal of Food and Agro-Industry, 4 (2). pp. 132-140. ISSN 1906-3040

Ma, Jun and Bao La, Ly Truc and Zaman, Izzuddin and Meng, Qingshi and Luong, Lee and Ogilvie, Denise and Kuan, Hsu-Chiang (2011) Fabrication, structure and properties of epoxy/metal nanocomposites. Macromolecular Materials and Engineering, 296. pp. 465-474. ISSN 1438-7492

Mahamud, Nurbaity Aqmar (2011) Pengukuran prestasi pemaju perumahan berdasarkan sistem star rating. Masters thesis, Universiti Tun Hussein Malaysia.

Mahmud, Farhanahani (2011) Real-time simulation and control of spatio-temporal cardiac excitation using an analog-digital hybrid circuit model. Doctoral thesis, Osaka University.

Mansour, Saleh Faraj (2011) Corporation robots. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Fudzee, Mohd Farhan (2011) Broker-based service-oriented content adaptation framework. Doctoral thesis, Deakin University.

Md Salleh, Salihatun (2011) Active intelligent control of vibration of flexible plate structures. Doctoral thesis, University of Sheffield.

Md Yunos, Norliana (2011) Kesan pembelajaran koperatif terhadap pencapaian pendidikan alam sekitar dalam kalangan pelajar sekolah menengah rendah. Masters thesis, Universiti Tun Hussein Malaysia.

Meng, Qingshi and Zaman, Izzuddin and R. Hannam, Joshua and Kapota, Shepherd and Luong, Lee and Youssf, Osama and Ma, Jun (2011) Improvement of adhesive toughness measurement. Polymer Testing, 30. pp. 243-250. ISSN 0142-9418

Mohamad, Elmy Johana and Mohd Yunus, Fazlul Rahman and Abdul Rahim, Ruzairi and Chan, Kok Seong (2011) Hardware development of electrical capacitance tomography for imaging a mixture of water and oil. Jurnal Teknologi, 54. pp. 425-442. ISSN 0127-9696

Mohamad Noor, Noraishah (2011) Prediction of springback in the forming of advanced high strength steel: simulation and experimental study. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Ariffin, Nur Azliatun Hisan (2011) Classification of critical aging segments of power transmission lines. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Ejledi, Alaeddin (2011) IAQ and CFD study on the ventilation system in a chassis dynamometer room. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Hamad, Khlid Abobaker (2011) Control design and simulation of an underwater vehicle. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Jelwal, Faisel (2011) Development of a DC-AC power conditioner for wind generator by using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.

Mohammad, Musli and Mann, Robin and Grigg, Nigel and Wagner, Jürgen P (2011) Business excellence model: an overarching framework for managing and aligning multiple organisational improvement initiatives. Total Quality Management, 22 (11). pp. 1213-1236. ISSN 1478-3363

Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and A. Johnson, David and Rahiman, Mohd Hafiz Fazalul and Mohamad, Elmy Johana and Amani, Hudabiyah Arshad and Abdul Sahib, Mohd Fadzli (2011) Optical tomography : transmitter and receiver circuit preparation. Jurnal Teknologi, 54. pp. 13-22. ISSN 0127-9696

Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Mohamad, Elmy Johana (2011) Optical tomography experimental setup : a study on reflection effect. Jurnal Teknologi, 54. pp. 455-464. ISSN 0127-9696

Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Zakarian, Zulkarnay and Muhamad, Elmy Johana and Karis, Mohd Safirin (2011) The linearity of optical tomography: sensor model and experimental verification. Sensors & Transducers Journal, 132 (9). pp. 40-46. ISSN 1726-5479

Mohd Tawil, Siti Nooraya (2011) Studies on the growth and characterization of rare-earth Gd-Doped InGan/Gan magnetic semiconductor heterostructures. Doctoral thesis, Osaka University.

Mohd Yunos, Siti Nur Mariani (2011) Performance characteristics monitoring of turboprop engine for the development of preliminary requirement of an engine testing facility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd. Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Zakaria, Zulkarnay and Mohamad, Elmy Johana and Karis, Mohd Safirin (2011) The linearity of optical tomography: sensor model and experimental verification. Sensors & Transducers Journal, 132 (9). pp. 40-46. ISSN 1726-5479

Mokhtar, Mardiha (2011) Mechanical properties of soft clay stabilized with cement-rice husks (RH). Masters thesis, Universiti Tun Hussein Malaysia.

Mokhtar, Norfaniza (2011) Shear strength analysis of concrete beams reinforced with GFRP bars using strut and tie model. Masters thesis, Universiti Tun Hussein Malaysia.

Muftah Saad, Ferass A. (2011) Predicting transformer end of life using transformer thermal life simulation technique. Masters thesis, Universiti Tun Hussein Malaysia.

Muhd Nor, Nik Hisyamudin (2011) Physicochemical study of absorption of CO2 into electric arc furnace slag. Doctoral thesis, Toyohashi University of Technology.

Mustafa, Mohd Kamarulzaki (2011) Detection of alzheimer's disease biomarkers and my cot oxins using spectroscopic ellipsometry. Doctoral thesis, Sheffield Hallam University.

O

O. Elojali, Otman Mohamed (2011) Water reticulation model for Taman Maju, Parit Raja. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Om Balkou, Mhimed Ramadan (2011) Computational study of shear strengthened of RC continuous beam using CFRP sheet with different wrapping scheme. Masters thesis, Universiti Tun Hussein Malaysia.

Omar, Rosli (2011) Path planning for unmanned aerial vehicles using visibility line-based methods. Doctoral thesis, University of Leicester.

P

Praptijanto, Achmad (2011) Sonochemistry approach for a new process of biodiesel production from Jatropha Curcas Oil. Masters thesis, Universiti Tun Hussein Malaysia.

Putrasari, Yanuandri (2011) Preparation of NiO catalyst on FeCrAI substrate using various techniques at higher oxidation process. Masters thesis, Universiti Tun Hussein Malaysia.

R

Radin Mohamed, Radin Maya Saphira (2011) Environmental impacts of greywater use for irrigation on home gardens. Doctoral thesis, Murdoch University.

Rahim, E. A. and Sasahara, H (2011) Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9). pp. 1505-1511. ISSN 0954-4054

Rahim, E. A. and Sasahara, H (2011) A study of the effect of palm oil as MQL lubricant on high speed drilling of titanium alloys. Tribology International, 44. pp. 309-317. ISSN 0301-679X

Ramadan Dofan, Jamal Ali (2011) Study on thermal model for calculating transformer hot Spot temperature. Masters thesis, Universiti Tun Hussein Malaysia.

Ramli, Khairun Nidzam (2011) Modelling and analysis of complex electromagnetic problems using FDTD subgridding in hybrid computational methods. Doctoral thesis, University of Bradford.

Ramli, Mohd Zakwan (2011) Development of accident prediction model by using artificial neural network (ANN). Masters thesis, Universiti Tun Hussein Malaysia.

Rashidi, Ramli (2011) The framework for effective collaboration between public training institutions and private industries in the context of National Dual Training System (NOTS) environment in Malaysia. Doctoral thesis, Universiti Tun Hussein Malaysia.

S

Saryanto, Hendi (2011) High temperature oxidation behaviour of nanocrystalline Fe80Cr20 alloys and ferritic steel implanted with lanthanum and titanium. Masters thesis, Universiti Tun Hussein Malaysia.

Sasi Koshad, Rabi Abrahim (2011) CFD simulation of heat transfer in vertical ribbed tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Selamat, Asri and Esa, Ahmad and Saad, Shamsaadal Sholeh and Atim, Asliaty (2011) Teaching and learning mathematics and science in English in primary schools in the state of Johor, Malaysia. Jurnal Pendidikan, 12. pp. 61-73. ISSN 9789991726038

Seng, Sue Men (2011) Location theory based wind energy system planning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shaban Jaber, Fathi (2011) Development of a DC-DC buck boost converter using fuzzy logic control. Masters thesis, Universiti Tun Hussein Malaysia.

Shamsuddin, Sharifah Hamimah (2011) Pembangunan dan penganalisisan aplikasi permohonan peruntukkan penyelenggaraan bangunan sekolah berasaskan proses pengurusan dalam kejuruteraan awam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Siswanto, Waluyo Adi and Ibrahim, Mohd Norihan and Madlan, Mohd Amran and Mohamad, Siti Mariah (2011) Shaker table design for electronic device vibration test system. International Journal of Engineering and Technology, 3 (6). pp. 663-668. ISSN 1793-8244

Spahat, Ghalip (2011) The role of learning organization in enhancing the implementation of national dual training system (NDTS) in Malaysia. Doctoral thesis, Universiti Tun Hussein Malaysia.

Suki, Nauwal (2011) Flexural analysis of concrete beams longitudinally reinforced with GFRP bars using discrete element model. Masters thesis, Universiti Tun Hussein Malaysia.

Sulaiman, Suhaizad (2011) Water permeability and carbonation on foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tang, Bee Lin (2011) Revitalisation of organic and peat soils. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tee, Kian Sek (2011) A mechatronic system for achieving optimum alignment of lower limb prosthesis. Doctoral thesis, University of Leeds.

Tee, Kian Sek (2011) A mechatronic system for achieving optimum alignment of lower limb prosthesis. Doctoral thesis, University of Leeds.

W

Wahid, Noorhaniza (2011) A novel approach to data mining using simplified swarm optimization. Doctoral thesis, University of Sydney.

Wan Ibrahim, Mohd Haziman (2011) Engineering properties and microstructure of brickwork under aggressive environment. Doctoral thesis, Universiti Sains Malaysia.

Wan Manan, Wan Nadiah (2011) Accident prediction model at un-signalized intersections using multiple regression method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Watisin, Wazli (2011) Pelaksanaan program pembelajaran berasaskan kerja di Kolej Komuniti Bukit Beruang Melaka: satu kajian kes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yaakub, Mohd Fauzi (2011) The effect of vortex trap on helicopter blade lift. Masters thesis, Universiti Tun Hussein Malaysia.

Yahya Sayegh, Ahmed Mohammed (2011) Design and fabrication of a novel wideband tem – cell for dielectric measurements. Masters thesis, Universiti Tun Hussein Malaysia.

Yanto, Iwan Tri Riyadi (2011) Rough clustering for web transactions. Masters thesis, Universiti Tun Hussein Malaysia.

Yonis Buswig, Yonis Mohammed (2011) Development of a dc-ac power conditioner for wind generator by using neural network. Masters thesis, Universiti Tun Hussein Malaysia.

Yusof, Mohd Sallehuddin (2011) Printing fine solid lines in flexographic printing process. Doctoral thesis, Swansea University.

Z

Zainal Abidin, Ahmadun Nijar (2011) An impulsive noise analyser using amplitude probability distribution (APD) for broadband-wired communication. Masters thesis, Universiti Tun Hussein Malaysia.

Zainal Abidin, Zuhairah (2011) Design, modeling and implementation of antennas using electromagnetic bandgap material and defected ground planes. Doctoral thesis, University of Bradford.

Zainuddin, Zarita and Pauline, Ong (2011) Modified wavelet neural network in function approximation and its application in prediction of time-series pollution data. Applied Soft Computing, 11 (8). pp. 4866-4874. ISSN 1568-4946

Zainuddin, Zarita and Pauline, Ong (2011) Reliable multiclass cancer classification of microarray gene expression profiles using an improved wavelet neural network. Expert Systems with Applications, 38 (11). pp. 13711-13722. ISSN 0957-4174

Zainuddin, Zarita and Wan Daud, Wan Rosli and Pauline, Ong and Shafie, Amran (2011) Wavelet neural networks applied to pulping of oil palm fronds. Bioresource Technology, 102 (23). pp. 10978-10986. ISSN 0960-8524

Zaman, Izzuddin and Le, Quyen-Huye and Kuan, Hsu-Chiang and Kawashima, Nobuyuki and Luong, Lee and Gerson, Andrea and Ma, Jun (2011) Interface-tuned epoxy/clay nanocomposites. Polymer, 52. pp. 497-504. ISSN 0032-3861

Zaman, Izzuddin and Tam, Thanh Phan and Kuan, Hsu-Chiang and Meng, Qingshi and Truc, Bao La and Lee, Luong and Youssf, Osama and Ma, Jun (2011) Epoxy/graphene platelets nanocomposites with two levels of interface strength. Polymer, 52. pp. 1603-1611. ISSN 0032-3861

Zulkepli, Masitah (2011) Pembangunan model penentuan keperluan perumahan kajian kes: Johor Bahru, Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

This list was generated on Sat Jun 25 11:09:59 2022 +08.