Items where Division is "Faculty of Mechanical and Manufacturing Engineering > Department of Mechanical Engineering" and Year is 2015

.

., Sulistyo (2015) Production of single cell anode-supported SOFC using NiO/YSZ-YSZ-LSM/YSZ powder materials. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

A

Ab Ghafar, Fauzi (2015) Driving cycle for small and medium duty engine case study of Ipoh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hadi, Syahrunniza (2015) Experimental study of the bio-additives in biodiesel fuel on performance and emissions characteristics of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul, Mohd Rizan (2015) Performance study on the effect of different exhaust length for motorcycle engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Haq, Raezul Haq (2015) Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nano-composites for fused deposition modelling (FDM) process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zulaikha (2015) Fabrication of 316L stainless steel (SS316L) foam via powder compaction method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, A.N. Aizat and Hasan, Sulaiman and Husin, Nofafifah (2015) Cyber value stream system reduced waste and non-value added of manufacturing operation. International Journal of Advancements in Mechanical and Aeronautical Engineering, 2 (2). pp. 205-208. ISSN 2372-4153

Ajeel Aljebur, Raheem Kadhim (2015) The effect of various types of building roof materials on the cooling load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alakashi, Abobaker Mohammed (2015) The development of dedicated CFD solver for aerodynamic analysis on internal and external flow. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Hafiz Aizat (2015) Comparison fine spray nozzle for two phase flow within experimental and simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Araby, Sherif and Meng, Qingshi and Zhang, Liqun and Zaman, Izzuddin and Majewski, Peter and Ma, Jun (2015) Elastomeric composites based on carbon nanomaterials. Nanotechnology, 26. pp. 1-23. ISSN 0957-4484

Awang, Mohd Naim (2015) A study of 2-stroke marine diesel engine characteristic based on condition based maintenance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Dorairaju, Hemarani (2015) Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Ghazali, Mohd Hafiz (2015) New design of tuned vibration absorber for wide frequency range application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hariri, Azian (2015) The development of welding fumes health risk assessment tool for automotive component related industries. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hasan, S. and Ahmad, A. N. A. and Feriyanto, D. (2015) Computerized value stream system (CVSS) to reduce waste in lean manufacturing operation. International Journal of Innovation in Mechanical Engineering & Advanced Materials, 1 (1). pp. 13-18. ISSN 2477-541X

Hasan, Sulaiman and Ahmad, A.N. Aizat and Feriyanto, Dafit (2015) Computerized value stream system (CVSS) untuk mengurangi limbah pada operasi lean manufaktur. Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri), 9 (1). pp. 61-71. ISSN 2085-5869

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Idris, Mohd Azli (2015) Vibration simulation of a simply-supported beam with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Muhammad Ridzuan (2015) Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ilmin, Siti Syazwani (2015) Study of mouthguard design for endurance and air-flow enhancement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isha Mudin, Azim (2015) Emission characteristic of small diesel engine fuelled by preheat biodiesel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Al Emran and Che Abdul Aziz, M.A. (2015) Tensile strength of woven yarn kenaf fiber reinforced polyester composites. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1695-1704. ISSN 2289-4659

J

Jalil, Azlis-Sani and Zaid, Muhammad Firdaus and Yahya, Musli Nizam and S. M. Ismail, S. M. Sabri and Ahmad Tajedi, Noor Aqilah and Abdul Aziz, Roseni and Md Zein, Raemy (2015) Evaluation of whole body vibration and back pain problem among Light Rapid Transit (LRT) drivers. Applied Mechanics and Materials, 773-77. pp. 845-849. ISSN 1662-7482

Jamaluddin, Mohd Fakhrul Razi (2015) Characteristic studies on types of paint spray for automotive parts in small and medium industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamaruddin, Muhamad Khiril (2015) Influence of passenger car air conditioner system thermostat level setting to fuel consumption and thermal comfort. Masters thesis, Universiti Tun Hussein Onn Malaysia.

L

Latif, Kamran (2015) New technique for the development of open CNC cell controller based on ISO 14649 and ISO 6983. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

M El-Aswad, Ashraf Mahmood (2015) Assessment of the effect of grain refinement on the solidification characteristics of Al-Si-Cu eutectic cast alloy using thermal analysis technical (CA-CCTA). Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Yusup, Eliza (2015) Production of temporary bone scaffold reinforced with OPEFB-CMC from oil palm empty fruit bunch. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Malik Fesal, Siti Natasha (2015) Simulation of vortex induced vibration of a bluff body structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ripin, Mohd Khairi Haslamia (2015) Modelling and simulation of train schedule and operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Hasan, Sazali (2015) CFD simulation of the dynamic flow behavior in a bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Seri, Suzairin and Amirnordin, Shahrin Hisham and Woon, Qiu Yik and Hissein Didane, Djamal (2015) Effects of geometrical parameters to the performance of louvered fin heat exchangers. Applied Mechanics and Materials, 773-77. p. 398. ISSN 1660-9336

Mior Idris, Wan Nur Amalina (2015) Characterization of nanostructures ZnO synthesized through hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Redzuan, Nurul Adila (2015) Synthesis of molten salt as heat transfer fluid for waste heat recovery application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Norhayati (2015) The effect of sintering temperature on potassium feldspar addition into claytan porcelain. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariffin, Ahmad Azrizal (2015) Pattern recognition for manufacturing process variation using integrated statistical process control – artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Nazihah (2015) Analysis of vortex shedding in a various body shapes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Pauzi, Nur Fazlinda (2015) Flowshop scheduling using artificial bee colony (ABC) algorithm with varying onlooker bees approaches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sohaimi, Nurul Adlihisam (2015) Intergration of control chart and pattern recognizer for bivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Mohd Shukri (2015) Design optimization for the two-stage bivariate pattern recognition scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nawawi, Azli (2015) A modified technique in RFID networking planning and optimization. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Noraini, Nor Mohd Razif (2015) Comparative study of indoor air contaminants in different stages of new building occupancy: work environment assessment. Masters thesis, Universiti Tun Hussein Malaysia.

Noraini, Nor Mohd Razif (2015) Comparative study of indoor air contaminants in different stages of new building occupancy: work environment assessment. Diploma thesis, Universiti Tun Hussein Onn Malaysia.

Nursal, Ridwan Saputra (2015) Performance and emissions characteristics of alternative biodiesel fuel on 4-stroke marine diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Ong, Tze Ching (2015) Modelling and simulation of drying process for ceramic membrane fabrication. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othoman, Mohamad Asyraf (2015) Effect of sun radiation exposure on indoor air quality of car interior in tropical country. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Rosli, Mohd Eley (2015) Modelling of pad support for foot osteoarthritis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosman, Nurafiqah (2015) Study on the effect of zeolite rice husk particles on polysulfone membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Sarhan, Ali Raheem (2015) Feasibility study of air catcher for natural ventilation application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sazali, Norazlianie (2015) Gas permeation properties and characterization of mitrimid based carbon tubular membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Aftab Ahmed (2015) Optimization of supply chain management by simulation based RFID with XBEE Network. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Suardi, Mirnah (2015) Rapid premixing fuel-water injector in burner combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tam, Lina (2015) The development of finite element model for Malaysian Female Anthropometric Dummy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Siun Cheng (2015) Printing conductive ink tracks on textile materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuah, Siti Nor Aizura (2015) Mechanical and thermal properties of polypropylene/clay roof tiles waste (PP/CRTW) composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yusoff, Adnan (2015) Effect of sound radiation from plate attached with absober. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zainal Abidin, Ahmad Sayuti (2015) Background concentration of airborne microbe in new constructed building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifly, Nurul Shahida (2015) Gas-liquid simulation of an airlift bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkipli, Nazatul Erma (2015) Dynamic modelling of flexible link aerator with embedded holes to generate dissolved oxygen in tiger prawn pond. Masters thesis, Universiti Tun Hussein Onn Malaysia.