Items where Subject is "T Technology > TK Electrical engineering. Electronics Nuclear engineering > TK2000-2891 Dynamoelectric machinery and auxiliaries. Including generators, motors, transformers"

.

.Kh. Eljugmani, Ahmed Saeed (2015) Development of portable 10 stages Marx Generator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A

Ab Ghani, Mohd Khairul Akli (2014) Development of PID current control for DC motor using arduino. Masters thesis, Universiti Tun Hussein Malaysia.

Ab. Hadi, Nik Aznan (2014) Air breakdown under lightning impulse with plane-plane electrode. Masters thesis, Universiti Tun Hussein Malaysia.

Abas, M.A. and Wan Salim, W.S. and Ismail, M.I. and Rajoo, S. and Martinez-Botas, R. (2017) Fuel consumption evaluation of SI engine using start-stop technology. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 2967-2978. ISSN 2289-4659

Abd Aziz, Muhammad Khairul Arifin (2008) Current transformer performance in high voltage and low voltage systems. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Aziz, Muhammad Khairul Arifin (2008) Current transformer performance in high voltage and low voltage systems. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Nurliana (2014) Simulation of speed control brushless DC motor using gaussian fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Diyya Hidayah (2014) FPGA-based digital controller for dc-dc converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Patas, Nor Hasnati (2014) Design study of outer rotor field excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Abdul Hadi (2014) Development of p-resonant voltage control for dc motor using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah @ Abdul Rahman, Suhaimi (2014) Effect of field utilization factor on air breakdown level under impulse lightning in point-sphere electrode system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulrazzaq Al-Iedani, Ali Salman (2019) Investigating inter-turn fault in transformer using TTR and FRA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Mohd Khairul (2009) Nanostructured titanium dioxide thin film for dye-sensitized Solar cell applications. Masters thesis, Universiti Teknologi Mara. Fakulti Kejuruteraan Elektrik.

Ahmad Mazlan, Nor Adillah (2014) Design improvements of 12 slot-14 pole hybrid excitation flux switching motor with 1.0 kg permanent magnet for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmed Al-subari, Musaed Mohammed (2018) Investigating the application of frequency response analysis for diagnosing tap changer on power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al-Mohammedawi, Ali Jber Mshkil (2019) A comparative study of MPPT and voltage regulator controllers for controlling output voltage in PV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alhamin, Sarinah Binti and Sim, Sy Yi and Chien, Siong Kai and Zambri, Nor Aira and Mustafa, Farahiyah and Alvin Lim, Meng Siang (2020) Artificial intelligence based direct torque control of induction motor drive system. In: UNSPECIFIED. (Submitted)

Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Ali Ateya, Ali Mohamed (2020) Analysis and observation of grid connected single phase inverter integration. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alir, Afifah (2013) Simulation of speed tracking for brushless DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Altayib Sahhouk, Masoud Albasheer (2019) Harmonic elimination by switching angle optimization technique for multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amin, Faisal (2020) Development of control algorithm for a new 12s-6p single phase field excited flux switching motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amin, Md Ruhul (2017) Self-synchronized converter for fast synchronization between low voltage microgrid and inverter connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arif, Saba and Naqvi, Syed Muhammad Afzal and Gill, Fahad Tariq and Qadeer, Adil and Taweekun, Juntakan and Noranai, Zamri and Kalvin, Roman (2021) Effect of refrigeration assisted intercooler turbocharging on engine’s horse power effect of refrigeration assisted intercooler turbocharging on engine’s horse power. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 95-111.

Arifin Abd Aziz, Muhammad Khairul (2008) Current transformer performance in high voltage and low voltage systems. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asadullah, Asadullah (2019) Cogging torque reduction of segmented HEFSM using combined technique of notching and chamfering for performance improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ayob, Mohammad Afif (2013) Dynamic leveling control of a wireless self-balancing ROV using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Azizulkarim, Azra Hazwanie and Abdul Jamil, Muhammad Mahadi and Adon, Mohamad Nazib and Ahmad, Muhammad Shukri and Mohamad Sharif, Johan and Ngadi, Md Asri and Ambar, Radzi (2018) Investigation on suitability of pulse duration parameter for HeLa cells line proliferation properties towards anti-cancer application. Journal of Physics: Conference Series, 1019. pp. 1-9. ISSN 1742-6588

B

Baharom, Md Nor Ramdon and Ullah, Irshad and H., Ahmad and Mahmod, Luqman Hakim and Zainal, Zainab (2016) Lightning effect on scaled protected and un-protected building structures; a simulation approach. Indonesian Journal of Electrical Engineering and Computer Science, 2 (3). pp. 401-408. ISSN 2502-4752

Baharom, Md. Nor Ramdon and Zainal, Zainab and Mahmod, Luqman Hakim and Ahmad, Hussein and Ullah, Irshad (2016) Performance of the lightning air terminal for the macro model of buildings. International Journal of Simulation: Systems, Science & Technology, 6. pp. 1-6. ISSN 1473-804x

Bahrim, Fatihah Shafiqah (2017) Cogging torque reduction of 6s-4p spoke-type IPMSM using a new combination of rotor design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Berahim, Nawi (2014) Development of PID voltage control for DC motor using arduino. Masters thesis, Universiti Tun Hussein Malaysia.

Bernard, Albinus (2013) Speed control of separately excited dc motor using artificial intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Che Mok @ Adnan, Mohd Dasri (2014) Lightning impulse tests on air-breakdown level in point-plane electrode configuration. Masters thesis, Universiti Tun Hussein Malaysia.

Che Muhamad Khabali, Mohd Khazani (2014) Investigation of increasing fault Gas in excitation transformers. Masters thesis, Universiti Tun Hussein Malaysia.

Chulan, Megat Azahari (2007) Design and implementation a single phase bi-directional DC-DC converter. Masters thesis, Universiti Malaya.

D

Deraman, Farih (2014) Development of p resonant current control for dc motor by using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elkarghali, Farag A. M. (2017) Hybrid fuzzy-proportionl integral derivative controller (F-PID-C) for control of speed brushless direct current motor (BLDCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Farag A. M., Elkarghali (2017) Hybrid fuzzy- proportionl integral derivative controller (F-PID-C) for control of speed brushless direct curren motor (BLDCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fernando, Very and Hasbullah, Hasbullah and Wirawan, Nanda Tommy and Bareduan, Salleh Ahmad (2024) I4.0 readiness index in electric power distribution in serving modern consumers. In: AIP Conference Proceedings.

G

Gorep, Nor Aizila (2013) Induction motor controller using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hamzah, Ahmad Azlan (2014) Effect of gap lenghts of sphere-sphere electrodes on air breakdown level under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Nasri (2013) Induction motor modelling using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.

Hashim, Nurul ‘Izzati (2013) Investigation of numerical technique to evaluate frequency response analysis (FRA) data measurement of auto power transformer. Masters thesis, Universiti Tun Hussein Malaysia.

Hassan Suliman, Khaled Abubaker (2013) Simulation of AC-DC converter for DC motor application using fuzzy logic control. Masters thesis, Universiti Tun Hussein Malaysia.

Hussian, Ammar Husaini (2014) PID-hysteresis voltage control technique for three phase induction motor (matlab simulink and arduino). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Mohd Najib (2014) Three phase inverter for induction motor by using pi-repetitive controller with arduino. Masters thesis, Universiti Tun Hussein Malaysia.

I

Ibrahim, Ismail Ishaq (2014) Performance studies of HEFSM with 6 slot- 7 pole for HEV application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iderus, Samat (2014) The field oriented control of a permanent magnet synchrounous motor (PMSM) by using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ignatius, Enwelum Mbadiwe (2020) Design of segmented outer rotor permanent magnet flux switching motor in transverse shape for high torque applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ismael, Ahmed Jameel (2020) Speed sensorless field oriented control of ac induction motor using model reference adaptive system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jamal, Siti Hairani (2014) Distribution system reliability improvement using distributed generators. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Nur Farah Aziera and Muthusamy, Khairunisa and AbuHashim, Muhammad Fitri and Mohamad Nazle, Haiqal Akashah and Othman, Nor Hazurina (2023) Influence of seawater mixing on fresh and mechanical properties of oil palm shell lightweight aggregate concrete containing spent garnet. In: INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING AND TECHNOLOGY 2023 (CIVENTECH 2023).

Jenal, Mahyuzie (2009) Performance characteristics of inverter driven synchronous motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jenal, Mahyuzie (2021) A new three phase 6-slots 10-poles permanent magnet flux switching machine with inner rotor configuration. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

K

Katim, Nurul Izzatul Akma (2013) Asset management decision making of power transformer with insulation ageing knowledge. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Faisal (2016) Design and optimisation of three-phase salient rotor wound field flux switching motor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

M Ramli, Roshahliza (2010) Study and application for rotational speed estimation method of a sensorless DC motor using adaptive filter. Masters thesis, Polytechnic University.

M.Romalan, Gadafi (2016) Design and development of a small-scale 12S-14P outer rotor HEFSM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ariff, Roslina and Hanafi, Dirman and Mulyo Utomo, Wahyu and Muhammad Zin, Nooradzianie and Sim, Sy Yi and Bohari, Azuwien Aida (2017) Takagi-Sugeno fuzzy perpose as speed controller in indirect field oriented control of induction motor drive. International Journal of Power Electronics and Drive System (IJPEDS), 8 (2). pp. 513-521. ISSN 2088-8694

Mat Husin, Azman (2014) Direct torque control induction motor drives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md. Yasid, Nurul Farahwahida (2019) The characteristic of frequency response on winding faults and configurations of transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ali, Ummu Umairah (2013) Transformer life prediction using data from units removed from service. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan (2016) Voltage stability assessment of power system network using QV and PV modal analysis. Journal of Telecommunication, Electronic and Computer Engineering, 8 (7). pp. 7-11. ISSN 2180-1843

Mohamed, Hazizul (2013) Smart torque control for overloaded motor using artificial intelligence approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Akmal Nizam and Ismail, Farzad (2014) Study of an entropy-consistent Navier–Stokes flux. International Journal of Computational Fluid Dynamics, 27 (1). pp. 1-14. ISSN 1029-0257

Mohammed, Ali Basim (2021) Power quality improvement by using non-linear sliding mode controller with the dynamic voltage restorer. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Ahmed Al-Fakih, Nawfan Mohammed (2021) Improvement of wind turbine lightning receptor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariff, Mohd Hisyam (2008) Field estimation of induction motor performance using dynamometer method and equivalent circuit method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohsen Al-Katheri, Hussein Hasan (2021) Development of machine learning-based algorithm to determine the condition in transformer oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mostaman, Nur Afiqah and Sulaiman, Erwan and Jenal, Mahyuzie (2024) Sequential Parts Analysis Using Local Optimization Method for Hybrid Excitation Flux Switching Generator. Majlesi Journal of Electrical Engineering, 18 (1). pp. 253-263.

Muftah Saad, Ferass A. (2011) Predicting transformer end of life using transformer thermal life simulation technique. Masters thesis, Universiti Tun Hussein Malaysia.

Muhamad, Nor Azrinna (2014) Design of zero-current switching DC-DC buck converter. Masters thesis, Universiti Tun Hussein Malaysia.

Murthy, Avinash Srikanta and Azis, Norhafiz and Al-Ameri, Salem and Mohd Yousof, Mohd Fairouz and Talib, Mohd Aizam (2018) Investigation of the effect of winding clamping structure on frequency response signature of 11 kV distribution transformer. Energies, 11 (2307). pp. 1-13. ISSN 1996-1073

N

Nasser Al-Ameri, Salem Mgammal Awadh (2019) Improvement of distribution transformer fault analysis using FRA method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ngadiron, Zuraidah (2007) Condition monitoring of electric motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngadiron, Zuraidah (2007) Condition monitoring of electric motor. Masters thesis, Universiti Tun Hussein Malaysia.

Nik Supian, Nik Mohd Azri (2013) Sensitivity study on influencing parameters of transformer thermal model with directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Oh Lai Ching, Narong (2019) Hybrid optimisation electromagnetic interference shielding effectiveness:mechanical and physical performance of plaster mortar containing palm oil fuel ash using taguchi grey and taguchi-flower pollination algorithm methods. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Mohd Fairoz (2016) Development of a new single-phase field excitation flux switching motor topology with segmental rotor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Mohd Fairoz and Sulaiman, Erwan and Ahmad, Md. Zarafi (2019) Electromagnetic performances and main parameter sensitivity effect on unbalance magnetic flux in a New Single‑Phase FEFSM with segmental rotor. Journal of Electrical Engineering & Technology, 14 (6). pp. 2333-2340.

Omar, Mohd Fairoz and Sulaiman, Erwan and Ahmad, Md. Zarafi (2019) Electromagnetic performances and main parameter sensitivity effect on unbalance magnetic flux in a new single‑phase FEFSM with segmental rotor. Journal of Electrical Engineering & Technology, 14. pp. 2333-2340. ISSN 1975-0102

Oon, Syahira Raihan (2013) Lifetime prediction and estimation of power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Rosdi, Hairierosniza (2014) Air breakdown characteristics in plane-plane and sphere gap electrode configuration under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Saad, Abdul Salam (2014) Three phase inverter for induction motor control using fuzzy-pi controller with arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabudin, Elia Nadira (2012) Development of position tracking of BLDC motor using adaptive fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saeed, Hussein Ali (2019) Development of safety health monitoring device to prevent and control risk in confined space. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saher, Rohaizan (2012) Three phase boost rectifier design. Masters thesis, Universiti Tun Hussein Malaysia.

Shaharuddin, Nurul Aimi (2020) Development of detection system of kidney and non-kidney images for different ultrasound machines. Masters thesis, Universiti Tun Hussein Malaysia.

Soomro, Hassan Ali (2021) New structure of dual stator hybrid excitation flux switching motor for aircraft applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Irfan Ali (2021) Advancement of a modular rotor permanent magnet flux switching machine for high torque performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Tan, Lorinna Mei Hua (2021) Development of variable voltage variable frequency drive system for induction motor speed control. Masters thesis, Universiti Tun Hussein Malaysia.

W

W. Salim, W.S.I. and Mahdi, A.A.M. and Ismail, M.I. and Abas, M.A. and Martinez-Botas, R.F. and Rajoo, S. (2017) Benefits of spark-ignition engine fuel-saving technologies under transient part load operations. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3027-3037. ISSN 2289-4659

Wan Husin, Wan Norhashimah (2014) Design improvement of outer-rotor hybrid excitation flux switching motor for in-wheel drive electric vehicle. Masters thesis, Universiti Tun Hussein Malaysia.

Y

Yahaya, Intan Fazlina (2014) A new structure of 12Slot-10Pole field-excitation flux switching synchronous machine for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yatim, Mohd Hafizie (2019) Symmetric and asymmetric multilevel inverter topologies with reduced number of switching devices structure for high power density achievement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Nazira (2014) Design study of the proposed 12slot-14pole field excitation flux switching machine (FEFSM) for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Malaysia.