Items where Subject is "T Technology > TA Engineering (General). Civil engineering (General)"

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type
Number of items at this level: 258.

Bulletin

UNSPECIFIED (2023) CETUSAN Fakulti Kejuruteraan Awam & Alam Bina Edisi Jan-Jun 2023. [Bulletin]

Yaakob, Maizatul Azrina and Omar, Mohd Azwadi (2022) BULLETIN INSTITUT KEJURUTERAAN INTEGRASI APRIL - JUN 2022. [Bulletin] (In Press)

Yaakob, Maizatul Azrina and Omar, Mohd Azwadi and Ahmad, Mohd Khairul (2023) Bulletin Institut Kejuruteraan Integrasi Jan - Mac 2023. [Bulletin]

Article

A Aziz, N A and Jayasuriya, N and L, Fan (2015) Adsorption study on Moringa Oleifera Seeds and Musa Cavendish as natural water purification agents for removal of lead, nickel and cadmium from drinking water. IOP Conference Series: Materials Science and Engineering, 136. pp. 1-9. ISSN 1757-8981

A. Khalid, Nur Hafizah and Ismail, Mohammad and Mohd. Sam, Abd Rahman and Mohamed, Azman and A. Ismail, Mohamed and Jamellodin, Zalipah and Salleh, Norhafizah and A. Hamid, Noor Azlina and A. Majid, Masni (2018) Physico-mechanical properties of polymer concrete containing micro-filler of palm oil fuel ash. Advanced Science Letters, 24 (6). pp. 3974-3977. ISSN 1936-6612

ADEL SOOMP, ZIJBAIR and SHANISUDIN, ABU UBAIDAH and NT ABD, RUZAIR and DRIAN, RAHEVI AMA and MOIED HALELI, AH (2023) NON-VERBAL HUMAN-ROBOT INTERACTION USING NEURAL NETWORK FOR THE APPLICATION OF SERVICE ROBOT. HUM Engineering Journal, 24 (1).

Abd Rahman, Norashidah and Khairuddin, Siti Amirah Azra and Jamaluddin, Norwati and Mohd Jaini, Zainorizuan (2018) Strength of reinforced fibrous foamed concrete-filled hollow section. 0255-5476, 936. pp. 219-223. ISSN 0255-5476

Abdul Rahman, Muhammad Faisal and Kamarudin, Kamarul Azhar and Dahlan, Hendery and Mohamed Hattab, Mohamed Nasrul (2020) Ballistic limit prediction on nacre shell using numerical simulation approach. Advanced Research in Natural Fibers, 2 (1). pp. 25-29. ISSN 2682-7409

Abdulameer Hussein, Ahmed and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati and Huseien, Ghasan Fahim and Wan Ibrahim, Mohd Haziman (2017) Performance of nanoceramic powder on the chemical and physical properties of bitumen. Construction and Building Materials, 156. pp. 496-505. ISSN 0950-0618

Ahmad, Nor Farah Atiqah and Askari, Muhamad and Harun, Sobri and Fadhil, Abu Bakar and Demun, Amat Sairin (2017) Sensitivity analysis of a FAO penman monteith for potential evapotranspiration to climate change. Jurnal Teknologi, 79 (7). pp. 21-30. ISSN 0127-9696

Ahmad Nazri, Mohamad Izzat Al Ridhwan and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Deraman, Rafikullah and Hasmori, Muhammad Fikri and Nagapan, Sasitharan and Abas, Nor Ain and Mustaffa Kamal, Mohd Firdaus (2018) A survey on work-related musculoskeletal disorders among construction trades. International Journal of Integrated Engineering, 10 (4). pp. 131-139. ISSN 2229-838X

Ahmad Termida, Nursitihazlin and Susilo, Yusak O. and Franklin, Joel P. (2016) Examining the effects of out-of-home and in-home constraints on leisure activity participation in different seasons of the year. Transportation, 43. pp. 997-1021. ISSN 0049-4488

Ahmad Termida, Nursitihazlin and Susilo, Yusak O. and Franklin, Joel P. (2016) Observing dynamic behavioural responses due to the extension of a tram line by using panel survey. Transportation Research Part A, 86. pp. 78-95. ISSN 0965-8564

Ahmed Al-Fadhali, Najib Mohammed and Zainal, Rozlin (2017) A theoretical framework on factors causing delay of construction industries projects. The Social Sciences, 12 (3). pp. 393-399. ISSN 1818-5800

Ahmed Jubair, Mohammed and Mostafa, Salama A. and Mustapha, Aida and Salamat, Mohamad Aizi and Hamid Hassan, Mustafa and Mohammed, Mazin Abed and AL-Dhief, Fahad Taha (2022) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. IET Communications. pp. 1-17.

Alhilali, Manhal and Hong, Yin Lam and Din, Jafri (2018) Comparison of raindrop size distribution characteristics across the Southeast Asia region. TELKOMNIKA, 16 (6). pp. 2522-2527. ISSN 1693-6930

Alipal, J. and Saidin, S. and Kai Lo, A.Z. and Koshy, P. and Abdullah, H.Z. and Idris, M.I. and Lee, T.C. (2023) In vitro surface efficacy of CaP-based anodised titanium for bone implants. Surfaces and Interfaces, 39. pp. 1-21.

Amin, Md. Ruhul and Zulkifli, Shamsul Aizam (2017) A framework for selection of grid-inverter synchronisation unit: harmonics, phase-angle and frequency. Renewable and Sustainable Energy Reviews, 78 (NIL). pp. 210-219. ISSN 1364-0321

Antonyová, Anna and Antony, Peter and Abdullah, Abdul Halid and Nagapan, Sasitharan and Daud, Zawawi and Abubakar, Mahmoud Hijab (2018) Certain building materials with respect to their thermal properties as well as to their impact to environment. International Journal of Integrated Engineering, 10 (4). pp. 126-130. ISSN 2229-838X

Arshad, Mohd Fadzil and Awang, Haryati and Putra Jaya, Ramadhansyah and Ali, Mohamad Idris and Mohd Yusak, Mohd Ibrahim and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman (2018) Effect of nano black rice husk ash on the chemical and physical properties of porous concrete pavement. Journal of Southwest Jiaotong University, 53 (5). pp. 1-6. ISSN 0258-2724

Atil, Aida Atiqah and Mat Hassan, Nik Normunira and Roseli, Adyla Illyana and Mohamed Yusop, Fatimah and Mohd Rus, Anika Zafiah and Marsi, Noraini and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah (2023) PHYSICAL CHARACTERIZATION OF POLYURETHANECLAY COMPOSITE DOPED WITH TREATED AND UNTREATED PU WASTE AS FILLER FOR SUBGRADE LAYER APPLICATIONS. Malaysian Construction Research Journal, 39 (1). pp. 29-40.

Awaludin, Ali and Shahidan, Shahiron and Basuki, Achmad and Mohd Zuki, Sharifah Salwa (2018) Laminated Veneer Lumber (LVL) sengon: an innovative sustainable building material in Indonesia. International Journal of Integrated Engineering, 10 (1). pp. 17-22. ISSN 2229-838X

Azahar, Mohamad Amirur Rahman and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Mohd Zamani Ngali, Ishkrizat Taib and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2022) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 1-12. ISSN 2180-1363

Azahar, Mohamad Amirur Rahman and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Taib, Ishkrizat and Ngali, Mohd Zamani and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2022) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 1-12.

Azman, Naqibah and Muhd Nor, Nik Hisyamudin and Hassan, Mohd Fahrul and Burhan, Mohd Hafiz and Muhd Muji, Siti Zarina and Mohamad, Fariza and Mohd Turan, Faiz and Bahasa, Abdul Rahman and Seiji, Yokoyama (2020) Industrial guideline for injection moulding : case of jaundice meter. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 299-303. ISSN 2278-3091

Bahari, Masitah and Mohd Kamil, Nor Amani Filzah and Akbar, Nor Azliza and Mizad, Meizareena (2018) Evaluation of fluoride concentration in water filter system for households. International Journal of Integrated Engineering, 10 (2). pp. 123-127. ISSN 2229-838X

Basri, Kasbi and Zainorabidin, Adnan and Mohd Masirin, Mohd Idrus and Mohd Said, Mohd Jazlan and Abdurahman, Mohamad Niizar (2018) Estimation of shear wave velocity using 1-D Multichannel Analysis of Surface Waves (MASW) and shear modulus of peat. Malaysian Construction Research Journal, 24 (1). pp. 1-10. ISSN 1985-3807

Basri, Sri Mazzura and Mamat, Mustafa and Ghazali, Puspa Liza (2018) The sufficient descent condition of nonlinear conjugate gradient method. International Journal of Engineering & Technology, 7 (4.3). pp. 458-461. ISSN 2227-524X

Burhanudin, Mohd Khairy and Wan Ibrahim, Mohd Haziman and Mohd Sani, Mohd Syahrul Hisyam and Juki, Mohd Irwan and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Shahidan, Shahiron and Basirun, Nurul Fasihah and Mohd Bosro, Mohamad Zulhairi (2018) Influence of ground coal bottom ash with different grinding time as cement replacement material on the strength of concrete. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 93-102. ISSN 1985-3807

Chai, Teck Jung and Tang, Hing Kwong and Koh, Heng Boon (2018) Water absorption and drying shrinkage of recycled foamed aggregate concrete. Malaysian Journal of Civil Engineering, 30 (3). pp. 466-476. ISSN 2600-9498

Daud, Zawawi and Abu Bakar, Mahmoud Hijab and Rosli, Mohd Arif and Ridzuan, Mohd Baharudin and Aliyu, Ruwaida (2018) Application of Response Surface Methodology (RSM) to optimize COD and ammoniacal nitrogen removal from leachate using moringa and zeolite mixtures. International Journal of Integrated Engineering, 10 (1). pp. 142-149. ISSN 2229-838X

Deraman, Rafikullah and Abdullah, Abd Halid bin and Nagapan, Sasitharan and Abas, Nor Haslinda and Suratkon, Azeanita Binti and Hasmori, Mohd Fikri (2018) Improving thermal conductivity of fired clay brick using sawdust waste. Asian Journal of Technical Vocational Education And Training, 4. pp. 1-8. ISSN 0128-0600

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Omar, Roslan (2013) Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models. Chemical Engineering Journal, 228 (NIL). pp. 1023-1029. ISSN 1385-8947

Gupta, Reshu and Selvam, Janani and Vajravelu, Ashok and Nagapan, Sasitharan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between Two Parallel Disks in the Presence of a Variable Magnetic Field. Symmetry, 15 (120). pp. 1-17.

Hamdan, R. and Ahmad, Siti Zu Nurain and Mohd Arshad, Nur’ain Nazirah (2018) Comparative study of high calcium and high iron filter media of unaerated and aerated steel slag filter systems in removing phosphorus. International Journal of Engineering & Technology, 7 (3.7). pp. 563-565. ISSN 2227-524X

Hamzah, Ahmad Farhan and Fadzil, Norzubaidah and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Arshad, Mohd Fadzil and Zainal Abidin, Norul Ernida and Dahalan, Nurol Huda (2017) Strength behaviour of coal bottom ash self-compacting concrete exposed to cyclic wtting-drying in seawater. Journal of Engineering and Applied Sciences, 12 (5). pp. 6922-6927. ISSN 1816-949X

Hanipah, M. H. and Abdullah, A. H. and Che Sidek, N. A. and Yunus, R. and Nagapan, S. and Yassin, M. N. and Muhammad Yazid, M. N. A. W. (2017) Wind characteristics and outdoor thermal comfort assessment in east Malaysia. Pertanika Journal of Science & Technology, 25 (S). pp. 63-72. ISSN 0128-7680

Hassan, S. and Yusof, M.S. and Embong, Z. and Ding, S. and Marwah, O.M.F. (2020) A study of printing plate mould development by using 3d printers for micro-flexographic printing process. Journal of Advanced Manufacturing Technology (JAMT), 14 (1). pp. 1-12. ISSN 1985-3157

Hiromitsu, Takano and Ikuho, Yonezawa and Mitsugu, Todo and Mazlan, Muhammad Hazli and Tatsuya, Sato and Kazuo, Kaneko (2017) Biomechanical study of vertebral compression fracture using finite element analysis. Journal of Applied Mathematics and Physics, 5 (NIL). pp. 953-965. ISSN 2327-4352

Hossain, Md. Zakaria and Abdul Awal, A.S.M. (2011) Flexural response of hybrid carbon fiber thin cement composites. Construction and Building Materials, 25 (2). p. 670. ISSN 0950-0618

Isa, Khairunesa and Wan Muda, Wan Hanim Nadrah and Ahmad, Abd. Rahman and Md. Yusoff, Rosman and Abd Kadir, Zulida (2018) Engineering students’ perception towards Malaysian nationhood course. International Journal of Engineering & Technology, 7 (4.9). pp. 186-189. ISSN 0222-7524

Ismail, Lokman Hakim and Sibley, Magda and Abdul Wahab, Izudinshah and A. Elgadi, Ahmed (2016) Layout design and users’ perception of different types of high-rise office buildings in Malaysia. Advanced Engineering Forum, 18. pp. 80-93. ISSN 2234-991X

Jamaluddin, Norwati and Yeoh, David and Abdul Ghani, Abdul Halim and Koh, Heng Boon and Shah Ayob, Sallehudin and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Tuan Chik, Tuan Norhayati and Abd. Ghafar, Nor Hayati (2018) A case study of residential buildings subjected to cracking failures. International Journal of Integrated Engineering, 10 (2). pp. 118-122. ISSN 2229-838X

Jamellodin, Zalipah and Jamaly, Mohamad Arif and Nor Azhar, Norazreen and A. Majid, Masni and Salleh, Norhafizah and Abdul Hamid, Noor Azlina and Adnan, Suraya Hani (2018) Binary effect of palm oil fuel ash and eggshell waste powder on heat of hydration for mortar. International Journal of Engineering and Technology, 7 (4.22). pp. 27-30. ISSN 2227-524X

Jamellodin, Zalipah and Mohd Saman, Hamidah and Adnan, Suraya Hani and A. Khalid, Nur Hafizah and Abdul Hamid, Noor Azlina and A. Majid, Masni and Salleh, Norhafizah (2018) Flexural behaviour of plain concrete prism strengthened by textile fine grained mortar. Advanced Science Letters, 24 (6). pp. 3982-3985. ISSN 1936-6612

Kasvar, K. K. and Nagapan, S. and Abdullah, A. H. and Ullah, K. and Deraman, R. and Yunus, R. and Sohu, S. (2017) Cost implication analysis of concrete and Masonry waste in construction project. Pertanika Journal of Social Science and Technology, 25 (S). pp. 177-184. ISSN 0128-7680

Kesot, Mohd Jahaya and Akasah, Zainal Abidin and Alias, Maizam and Lashari, Tahira Anwar (2015) An affective-cognitive teaching and learning approach for enhanced behavioural engagements among engineering students. Engineering Education A Journal of the Higher Education Academy, 8 (2). pp. 65-76. ISSN 1750-0052

Lee, Sim Yee and Ahmad, Hilton (2016) Experimental strength of single-lap hybrid joints on woven fabric kenaf fiber composites under quasi static condition. MATEC Web of Conferences, 47. pp. 1-6. ISSN 2261-236X

Lee, Yee Yong and Md Din, Mohd Fadhil and Ponraj, Mohanadoss and Noor, Zainura Zainon and Kenzo, Iwao and Chelliapan, Shreeshivadasan (2017) Overview of urban heat island (UHI) phenomenon towards human thermal comfort. Environmental Engineering and Management Journal, 16 (9). pp. 2097-2111. ISSN 1582-9596

Letchumanan, S.M. and Arifin, A.M.T. and Ismail, A. E and Taib, I. (2023) A Review on Carbon Fiber Reinforced Polymer as Wrapping Structures For Pipeline. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (1). pp. 45-57. ISSN 2600-7916

Lim, Shing Chee and Khoo, Weily and Koh, Ching Theng (2017) Electrospinning of Polycaprolactone (PCL) and Gelatin Polymeric Fibers. Journal of Mechanical Engineering, 4 (3). pp. 246-254. ISSN 1823- 5514

Ma, Chau-Khun and Awang, Abdullah Zawawi and Omar, Wahid and Sarbini, Noor Nabilah and Shahidan, Shahiron (2018) State of the art on pre-tensioning steel straps confinement: literature review. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 210-220. ISSN 1985-3807

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Sohu, Samiullah (2017) Utilization of sawdust ash as cement replacement for the concrete production: a review. Engineering Science Technology International Research Journal (ESTIRJ), 1 (3). pp. 11-15. ISSN 2521-5027

Mazlan, Nurul Hidayah and A Hamid, Isredza Rahmi (2018) Evaluation of feature selection algorithm for android malware detection. International Journal of Engineering & Technology, 7 (4.31). pp. 311-315. ISSN 2227-524X

Md Noha, M.S. and Ahmad, Z. and Ibrahim, A. and Walkerd, P. (2016) Development of new prefabricated wall constructed using wood-wool cement composite panel. Procedia Environmental Sciences, 34. pp. 298-308. ISSN 1878-0296

Md. Ali, Massofia and Abas, Nor Haslinda and Mohd Affandi, Haryanti and Abas, Nor Ain (2018) Factors impeding the industrialized building system (IBS) implementation of building construction in Malaysia. International Journal of Engineering & Technology, 7 (4). pp. 2209-2212. ISSN 2209-2212

Mohajerani, Abbas and Abdul Kadir, Aeslina and Larobina, Luke (2016) A practical proposal for solving the world’s cigarette butt problem: recycling in fired clay bricks. Waste Management and Research (WMR), 52. pp. 228-244. ISSN 0734-242X

Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Leow, Pei Ling and Rahiman, Mohd Hafiz Fazalul and Marwah, Omar Mohd Faizan and Nor Ayob, Nor Muzakkir (2012) Segmented capacitance tomography electrodes: a design and experimental verifications. IEEE Sensors Journal, 12 (5). pp. 1589-1598. ISSN 1530-437X

Mohamad, Nazeera and Che Him, Norziha and Rusiman, Mohd Saifullah and Sufahani, Suliadi and Muhammad Jamil, Siti Afiqah (2018) Application FCM in modelling DIR for Selangor using negative binomial GAM. International Journal of Engineering & Technology, 7 (4.3). pp. 1-4. ISSN 2227-524X

Mohamed, Radin and Abdulrahman, Adeleke and Sainudin, Muhammad Shabery bin and Bakar, Siti Asmah and Mohd Kassim, Amir Hashim and Al-Gheethi, Adel (2018) Optimization of ceramic waste filter for bathroom greywater treatment using central composite design (CCD). Journal of Environmental Chemical Engineering, 6 (2). pp. 1578-1588. ISSN 2213-3437

Mohammed, Mazin Abed and Abd Ghani, Mohd Khanapi and Arunkumar, N. and Hamed, Raed Ibraheem and A. Mostafa, Salama and Abdullah, Mohamad Khir and Burhanuddin, M. A. (2018) Decision support system for nasopharyngeal carcinoma discrimination from endoscopic images using artificial neural network. THE JOURNAL OF SUPERCOMPUTING, 76 (2). pp. 1086-1104. ISSN 0920-8542

Mohammed, Mazin Abed and Al-Khateeb, Belal and Rashid, Ahmed Noori and Ahmed Ibrahim, Dheyaa and Abd Ghani, Mohd Khanapi and A. Mostafa, Salama (2018) Neural network and multi-fractal dimension features for breast cancer classification from ultrasound images. Computers and Electrical Engineering, 70. pp. 871-882. ISSN 0045-7906

Mohd Ali, A.Z. and Sanjayan, Jay and Guerrieri, Maurice (2017) Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Construction and Building Materials, 137. pp. 195-207. ISSN 0950-0618

Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron and Choong, Kok Keong and Jayaprakash, J. (2018) Effectiveness of repair method using hybrid fiber reinforced polymer fabric on concrete-filled double skin steel tubular columns exposed to fire. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 239-250. ISSN 1985-3807

Muhamad Sanusi, Amanina and Puteh, Saifullizam and Hassan, Nur Farha (2018) Research needs: issues and problems of talent working graduates university programs of engineering and technology. Advanced Science Letters, 24 (11). pp. 8051-8055. ISSN 1936-6612

Musa, S. and Abu Mansor, N.A. A. and Bujang, S. S. and Mohd Kamil, N. A. F. and Adnan, M. S. and Hamdan, R. (2017) Potential study of water extraction from selected plants. MATEC Web of Conferences, 103 (04023). pp. 1-7. ISSN 2261-236X

Ngali, Zamani and Jemain, Noratika Budi and Chang, An Wee and Abdol Rahman, Mohd Nasrull and Kaharuddin, Muhammad Zulhilmi and Khairu Razak, Siti Badriah (2018) Forecasting modelling of cockles in Malaysia by using time series analysis. International Journal of Engineering & Technology, 7 (4.3). pp. 488-491. ISSN 2227-524X

Nizam, Z. M. and Obiya, H. and Ijima, K. and Azhar, A. T. S. and Hazreek, Z. A. M. and Mohd Zin, Nur Shaylinda (2018) The evaluation of shear deformation for contact analysis with large displacement. Journal of Physics: Conference Series, 995. pp. 1-11. ISSN 1742-6588

Nor, Maria Elena and Rusiman, Mohd Saifullah and Sufahani, Suliadi Firdaus and Abdullah, Mohd Asrul Affendi and Bataraja, Sathwinee (2017) Deseasonalisation in electricity load forecasting. International Journal of Engineering & Technology, 5. pp. 1-4. ISSN 2227-524X

Nor Azli, Mohamad Nor Azhari and Khasri, Muhammad Aidil and Hariri, Azian and Chong, Zi Yao and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2022) Pilot study on investigation of Thermal Sensation Votes (TSV) and students' performance in naturally ventilated classroom. Environment and Ecology Research, 10 (4). pp. 508-517.

Othman, Raudhah and Dorin, Thomas and Stanford, Nikki and Hodgson, Peter (2022) The microstructure of high manganese TWIP steels produced via simulated direct strip casting. Materials Science and Technology Engineering. pp. 1-10.

Othuman Mydin, Md Azree and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Mahmood Abdal Qaidi, Shaker and Awoyera, Paul Oluwaseun (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 35-144. ISSN 2462-1943

Pakarzadeh, H. and Othman, N. and Tay, K. G. and Cholan, N. A. (2022) Two-pump parametric amplification in the presence of fiber dispersion fluctuations: a comparative study. Applied Optics, 61 (1). pp. 308-315.

Palpanadan, Sarala @ Thulasi and Kadir@Shahar, Hazila and Md Ngadiran, Nurizah (2020) Engineering undergraduates’ perspectives of effective platforms forpresentation in English. International Journal of Innovations in Management, Engineering and Science (IJIMES), 5 (3). pp. 14-19. ISSN 2455-9008

Putra Jaya, Ramadhansyah and Che Wan, Che Norazman and Hainin, Mohd Rosli and Mohd Warid, Muhammad Naqiuddin and Wan Ibrahim, Mohd Haziman and Mohamed Nazri, Fadzli and Arshad, Mohd Fadzil (2018) Strength properties of rice husk ash concrete under sodium sulphate attack. International Journal of Integrated Engineering, 10 (4). pp. 199-202. ISSN 2229-838X

Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Wan Ibrahim, Mohd Haziman and Nazri, Fadzli Mohamed and Arshad, Mohd Fadzil and Muthusamy, Khairunisa (2018) Physical and chemical properties of rice husk ash concrete under seawater. International Journal of Integrated Engineering, 10 (4). pp. 165-168. ISSN 2229-838X

Ramly, Nurfarawahida and Rusiman, Mohd Saifullah and Che Him, Norziha and Nor, Maria Elena and Suparman, S. and Ahmad Basri, Nur Ain Zafirah and Mohamad, Nazeera (2018) A new hybrid of fuzzy c-means method and fuzzy linear regression model in predicting manufacturing income. International Journal of Engineering & Technology, 7 (4.3). pp. 473-478. ISSN 2227-524X

Rasib, Abd Wahid and Mohd Ali, Hamzah and Alvin, L.M.S. and Kanniah, K.D. and Idris, Nurul Hawani and Omar, Hamdan and Dollah, Rozilawati and Ahmad, Mustaffa Anjang (2018) Upscaling aboveground biomass estimation at low-land royal belum forest reserve using unmanned aerial vehicle image. International Journal of Integrated Engineering, 10 (4). pp. 140-150. ISSN 2229-838X

Raut, Ashwin Narendra and Gomez, Christy Pathrose (2016) Utilization of waste as a constituent ingredient for enhancing thermal performance of bricks – a review paper. Indian Journal of Science and Technology, 9 (37). pp. 1-12. ISSN 0974-6846

Ridzuan, Mohd Baharudin and Daud, Zuikarnain and Ahmad, Z. (2017) A study of COD and ammonia removal by adsorbent (activated carbon, zeolite and clay) from landfill leachate. International Journal of Integrated Engineering, 9 (1). pp. 50-53. ISSN 2229-838X

Romayne, Anders Hans and Ahmad, Hilton (2016) Notched strength of woven fabric kenaf composite plates with different stacking sequences and hole sizes. MATEC Web of Conferences, 78. pp. 1-6. ISSN 2261-236X

Saiful Azam, Syafiqah Ruqaiyah and Darlis, Nofrizalidris and Mustaffa, Norrizal and Azahar, Mohamad Amirur Rahman and Sadun, Amirul Syafiq and Abu Hassan, Omar and Taib, Ishkrizat and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis of the Effect of Heat Distribution on Different Heating Pad Piping Arrangements for Flexitank Application. CFD Letters, 15 (2). pp. 1-15.

Saiful Azam, Syafiqah Ruqaiyah and Darlis, Nofrizalidris and Mustaffa, Norrizal and Azahar, Mohamad Amirur Rahman and Sadun, Amirul Syafiq and Abu Hassan, Omar and Taib, Ishkrizat and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2023) CFD Analysis of the Effect of Heat Distribution on Different Heating Pad Piping Arrangements for Flexitank Application. CFD Letters, 15 (2). pp. 1-15. ISSN 2180-1363

Salim, Salman and Mat Nor, Ahmad Hakimi and Sanik, Mohd Erwan and Osman, Mohammad Hairi and Abdullah, Mohd Sufyan and Sarif, Abd Sukor and Kumil, Jenylex (2017) Bolts connection technique of bamboo in construction work. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 14 (4). pp. 54-60. ISSN 2320-334X

Sanik, M. E. and Rahimi, N. F. L. and Hamid, N. B. and M. Nor, A. H. and Prasetijo, J. and Razali, N. F. (2017) Critical gap analysis of merging sections at Kuala Lumpur middle ring road. Journal of Engineering and Technology, 8 (1). pp. 58-68. ISSN 2180-3811

Sarani, Noor Amira and Abdul Kadir, Aeslina and Md Din, Mohd Fadhil and Hashim, Azini Amiza and Hassan, Mohd Ikhmal Haqeem and Abdul Hamid, Nur Jannah and Huda Hashar, Nurul Nabila and Hissham, Nur Fatin Nabila and S.M. Johan, Siti Farhanah (2023) Physical-mechanical properties and thermogravimetric analysis of fired clay brick incorporating palm kernel shell for alternative raw materials. Construction and Building Materials, 376. pp. 1-18.

Seswoya, Roslinda and Abdul Karim, Ahmad Tarmizi and Darnak, Nur Aiza and Abd Rahman, Muhammad Fahmi (2018) Methane potential from the digestion of food waste in a batch reactor. International Journal of Engineering & Technology, 7 (3.23). pp. 36-39. ISSN 2227-524X

Shirazi, Mohammad Gharehzadeh and A Rashid, Ahmad Safuan and Nazir, Ramli and Abdul Rashid, Azrin Hani and Horpibulsuk, Suksun (2020) Enhancing the bearing capacity of rigid footing using limited life kenaf geotextile reinforcement. Journal of Natural Fibers, 1 (NIL). pp. 1-16. ISSN 1544-046X

Soon, C. K. and Zaini, Z. and Mohd Ujang, A. and Nagapan, S. and Abdullah, A. H. and Hasmori, M. F. and Rassiah, K. (2017) A case study of green building in Malaysia: cost saving analysis. Pertanika Journal of Science & Technology, 25 (S). pp. 191-196. ISSN 0128-7680

Sunar, N.M. and Subramaniam, Tamil Selvan and Zulkifly, N.F. and Parjo, Umi Kalthsom and Er, Ching Ming and Leman, Abdul Mutalib and Khalid, Amir and Shaari, Muhammad Farid and Abdul Rashid, Azrin Hani and Zaidi, E. and Azhar, A. T. S. (2018) Indoor fungal growth on variable antifungal at different wall finishing on plasterboard. International Journal of Engineering & Technology, 7 (3.23). pp. 53-55. ISSN 2227-524X

Suparman, S. and Rusiman, Mohd Saifullah (2018) Hierarchical Bayesian estimation for stationary autoregressive models using reversible jump MCMC algorithm. International Journal of Engineering & Technology, 7 (4.3). pp. 64-67. ISSN 2227-524X

Tanaka, Koki and Ijima, Katsushi and Obiya, Hiroyuki and Zakaria, Muhammad Nizam bin (2018) Mechanically rational forms of curved surface structures shaped from the uniform strain elements. International Journal of Integrated Engineering, 24 (6). pp. 87-92. ISSN 2229-838X

Tarik Aziz Patwary, Tarik Aziz Patwary and Djamal Hissein Didane, Djamal Hissein Didane and Sami Al-Alimi, Sami Al-Alimi and Yazid Abdullsameea Mohammed Saif, Yazid Abdullsameea Mohammed Saif and Bukhari Manshoor, Bukhari Manshoor (2023) Assessment of Wind Power Potentials in Chittagong, Bangladesh Using Weibull Distribution Function. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 105 (1). pp. 154-165. ISSN 2289-7879

Teddy, T. and J.M., Irwan and Othman, N. and Gani, P. (2018) Bio-concrete on chloride condition: effect on compressive strength and water penetration. Malaysian Construction Research Journal (MCRJ), 4 (2). pp. 129-140. ISSN 2590 - 4140

Wahir, Norsoraya Azurin and Nor, Maria Elena and Rusiman, Mohd Saifullah and G. P., Khuneswari (2018) Alternative method outlier treatments with Box-Jenkins and neural network via interpolation method. Journal of Science and Technology, 10 (2). pp. 122-127. ISSN 2600-7924

Widaningrum, Sri and Mohammad, Musli and Ibrahim, Rasidi (2020) Integration the 6th category business excellence framework, the 8th clause ISO 9001:2015 and the 6th category KPKU Indonesia framework. International Journal of Integrated Engineering, 12 (7). pp. 291-300. ISSN 2229-838X

Wijeyesekera, Devapriya Chitral and Wooi, Eric Kee Loh and Lim, Alvin John Meng Siang (2017) Sustainable hydraulic barrier design technologies for effective infrastructure engineering. MATEC Web of Conferences, 103 (04022). pp. 1-9.

Yao, Chong Zi and Nor Azli, Mohamad Nor Azhari and Harir, Azian and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2023) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 1-14. ISSN 2289-7879

Yazdani, Sepideh Foroozan and Tan, Zhiyuan and Kakavand, Mohsen and Mustapha, Aida (2018) NgramPOS a bigram-based linguistic and statistical feature process model for unstructured text classification. WIRELESS NETWORKS. pp. 1-11. ISSN 1022-0038

Yusof, Z.M. and Farn, W.S. and Leow, C.S. and Lee, J.C. (2023) Rock point load test (PLT index) and its correlation with rock coring rate of bored pile machine. Physics and Chemistry of the Earth, 129. pp. 1-12.

Zhang, Wen and Ahmad Termida, Nursitihazlin and Susilo, Yusak O (2017) What construct one’s familiar area? A quantitative and longitudinal study. Environment and Planning B: Urban Analytics and City Science. pp. 1-19. ISSN 2399-8083

Book Section

S.M. Johan, Siti Farhanah and Chan, Chee Ming (2022) Correlating permeability with drainage layer thickness overlying dredged marine clay in consolidation. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 1-94. ISBN 978-967-2817-40-6

Salim, Salman and ., Nurul Izzati and ., Jeo Amran and Che Manaf, Nor Syahidah and Mohd Azmy, Syakirul Azim (2020) Travel behaviour and perception of mode public transportation among users in Malaysia. In: Sustainable Civil Engineering Technical Papers. Penerbit UTHM, pp. 71-81. ISBN 978-967-2916-21-5

Salim, Salman and Mazlan, Amir Osman and Muhammad Jalil, Amy Ashmiera and Mohamed Azmi, Muhammad Afiq Firdaus and Hassan, Nurul Hafizah and Md Yaacob, Nur Emylia Absarina (2020) Pavement condition survey in road along Kampung Selancar Pagoh. In: Sustainable Civil Engineering Technical Papers. Penerbit UTHM, pp. 29-37. ISBN 978-967-2916-21-5 (In Press)

Salim, Salman and Mohamad Azali, Fatin Farhawanie and Ruslan, Fatin Najihah and Naim, Fitri and Mohd Jaaffar, Khairunnisa (2020) Inspection of defect at a two floor house in Jalan Kg. Raja, Pagoh, Mukim Jorak, Muar, Johor. In: Sustainable Civil Engineering Technical Papers. Penerbit UTHM, pp. 11-19. ISBN 978-967-2916-21-5

Conference or Workshop Item

Budiea, A M A and Yahaya, N and Noor, N M and Abdullah, A H and W Ibrahim, M H and Suratkon, A and Muthusamy, K (2020) Corrosion study of pipeline material for seabed sediment in tropical climate. In: 4th International Conference on Construction and Building Engineering & 12th Regional Conference in Civil Engineering (ICONBUILD & RCCE 2019), 20-22 August 2019, Langkawi.

Thesis

Ab Aziz, Haslinda (2003) Pembangunan sistem pangkalan data e-inventori makmal : makmal Kejuruteraan Awam dan Makmal Teknologi Kejuruteraan Pembinaan dan Alam sekitar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Ab Rahman, Amera Ratia (2016) Performance of physical shell foundation model under axial loading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abass Younis, Fatma Hussien (2021) Thermal performance improvement for residential buildings in the tropics through the application of green façade and green roof. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz, Ameer Nazrin (2018) Sustainable slow maintained pile load test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Junita (2015) Relationship between decomposition level and induced solidification of peat based on laboratory investigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Noor Azlina (2005) The use of horizontal and inclined bars as shear reinforcement. Masters thesis, Universiti Teknologi Malaysia.

Abdul Latif, Noradila (2015) Effect of strain rates on tensile properties and fracture toughness determination of extruded Mg-Al-Zn alloys. Doctoral thesis, Universiti Kebangsaan Malaysia.

Abdul Muthalib, Norhazizi (2003) Pemurnian manual prosedur ujikaji Makmal Geoteknik Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdul Muthalib, Norhazizi (2003) Pemurnian manual prosedur ujikaji makmal geoteknik, Jabatan Kejuruteraan Awam, Fakulti Kejuruteraan, Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abdullah, Siti Ashraf (2014) Fabrication of smart glass electrochromic device using rf magnetron sputtering. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Noor Azma (2004) Penghasilan buku panduan kerja luar ukur takimetri bagi meningkatkan tahap kefahaman pelajar dalam pembelajaran secara amali. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Abu Talib, Zaihasra (2005) Compressibilty and Young's modulus of filled joint. Masters thesis, Universiti Teknologi Malaysia.

Adekunle Micheal, Adeshina (2013) Fast parallel volume visualization on cuda technology. Doctoral thesis, Universiti Tun Hussein Malaysia.

Adon @ Mohd Don, Rashidah (2009) Simulation study on various shapes of pad footing sub-structure on Batu Pahat soft soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Agam, Mohd Arif (2006) An investigation of physical processes in nanosphere lithography. Doctoral thesis, University of Birmingham.

Ahmad, Afandi (2010) Efficient reconfigurable architectures for 3-D medical image compression. Doctoral thesis, Brunel University.

Ahmad Bakri, Hafizah (2013) Tahap kebimbangan pelajar wanita bidang kejuruteraan terhadap peluang kerjaya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ajer, Mohd Razali (2012) Studies of epoxy powder coated galvanized steel substrate via electrostatic powder coating system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Detho, Amir (2021) PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Arhami, Arhami (2013) Design and analysis of an unmanned small-scale air-land-water vehicle. Doctoral thesis, Universiti Tun Hussein Malaysia.

Asmayou, Ali. H. (2014) Simulation of palm oil and methanol mixing in stirred tank by implement a normal and fractal baffles. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Nurul Bazilah (2018) Performance of composite sand cement brick containing recycled concrete aggregate and waste polyethylene terepthalate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Badarulzaman, Nur Azam (2010) Pengaruh adukan dan kepekatan partikel silicon karbida sebagai penguat terhadap kelakuan salutan komposit matriks nikel. Doctoral thesis, Universiti Teknologi Malaysia. Fakulti Kejuruteraan Awam.

Bagu, Pitus @ Vitus (2002) Penghasilan manual ringkas penggunaan alat Total Station sokkia set5f dan perisian Sdr Mapping & Design untuk automasi ukur topografi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Buhari, Rosnawati (2022) The performance of warm mix asphalt incorporating asphalt binder improved with amine nano-tio2 additives. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Bux @ Imran Latif, Qadir (2012) Critical impact energy for local impact damage of hard projectile on concrete slab. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chee, Kwok Chien (2011) FSI analysis of artery suffering atherosclerosis. Masters thesis, Universiti Tun Hussein Malaysia.

Darmin, Darni (2004) Kaedah pembelajaran lukisan kejuruteraan berasaskan simulasi. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

David Daniel, Basil (2012) The impacts of neighbourhood traffic management. Doctoral thesis, University of Canterbury.

Ding, Lik Suong (2021) Experimental and simulation approaches for improving integrated circuit impedance characterisation under electrostatic discharge condition. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Feriyanto, Dafit (2014) Development of nanocrystalline Fe80Cr20 alloy using combination technique of ball milling and ultrasonic treatment for fuel cell interconnector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Firdianto, Ade (2012) Ultrasonic treatment with nickel electroplating combined with oxidation for developing γ-Al2O3 washcoat on Fe-Cr-Al substrate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fuad, Norfaiza (2007) Detection of head position using chain code algorithm. Masters thesis, Universiti Putra Malaysia.

Hamid, Halina (2004) Pembangunan web cd prosedur kerja luar ukur teodolit makmal teknologi ukur pembinaan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Harun Habib, Mohammed Ilias (2003) Pembangunan modul pembelajaran kejuruteraan bekalan air dan air sisa bagi kursus kejuruteraan awam di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hasan, Zaki (2003) Penghasilan dan penilaian modul pengujian ke atas konkrit basah bagi pelajar kursus kejuruteraan awam. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Hashim, Mohd Nurhanif (2008) Simulation model for effective supply chain management using arena. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Hashimah Kho (2013) Kajian terhadap ketahanan hentaman ke atas konkrit berbusa yang diperkuat dengan serat kelapa sawit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Nurhafizzah (2008) A preliminary study of turning of composites. Masters thesis, University of Liverpool.

Hassan, Zaid Tariq (2022) Development of differential protection scheme using positive sequence current for a microgrid. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hatta, Nasrul (2007) Preparation and mechanical properties of palm fiber/polylactic acid composites. Masters thesis, Nagoya Institute of Technology.

Ho, Meei Hoan (2008) Some mechanical and chemical properties of cement stabilized Malaysian soft clay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Halim Irwan (2005) The effect of buckling in FRP members. Masters thesis, Universiti Teknologi Malaysia.

Ibrahim@Tamrin, Mohd Norihan (2008) Stiffness and vibrational characteristics of SMS/DER331 composites with shape memory alloy long fibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Azrini (2013) Performance analysis for facial expression recognition under salt and pepper noise with median filter approach. Masters thesis, Universiti Tun Hussein Malaysia.

Imran, Nik Farhanim (2011) Tensile force and bond stress of longitudinal reinforcemenet in heavily reinforced concrete beam. Masters thesis, Universiti Tun Hussein Malaysia.

Ishak, Nurul Syafeeqa (2022) Detection of sugar solution at low concentration using terahertz spectroscopy combined with frequency-selective surface (FSS). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Lindawati (2012) Acoustic and durability performances of Arenga Pinnata panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaini, Norhaslina (2014) Vibration analysis of a beam structure attached with two dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Jamian, Saifulnizan (2012) Application of functionally graded materials for severe plastic deformation and smart materials: experimental study and finite element analysis. Doctoral thesis, Nagoya Institute of Technology.

Johari, Ishak (2003) Kebolehgunaan CD pembelajaran berbantu komputer bagi matapelajaran rekabentuk struktur 1 di Politeknik Sultan Haji Ahmad Shah, Kuantan, Pahang. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Juki, Mohd Irwan (2010) Development of bent-up triangular tab shear transfer (BTTST) enhancement in cold-formed steel (CFS)-concrete composite beams. Doctoral thesis, Universiti Teknologi Mara..

Kamaruddin, Sharul Ashikin (2008) Zinc oxide nanostructures: the effect of deposition parameters on the electrical properties using sol-gel method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Noor Hasliza (2012) Reinforcement of rice husk in ceramic shell mould system for investment casting process. Masters thesis, Universiti Tun Hussein Malaysia.

Kamdani, Kamaruddin (2005) Influence of preheating on chatter and machinability of titanium alloy-Ti6A14V. Masters thesis, International Islamic University Malaysia.

Kasim, Narimah (2008) Improving materials management on construction projects. Doctoral thesis, Loughborough University.

Kassim, Noraniah (2012) New technique of producing removable complete denture using rapid tooling approach. Masters thesis, Universiti Tun Hussein Malaysia.

Khaerudini, Deni Shidqi (2011) Development of nanocrystalline ironchromium alloy by means of sintering and ion implantation for interconnect application in high-temperature solid oxide fuel cells. Masters thesis, Universiti Tun Hussein Malaysia.

Khairu Razak, Siti Badriah (2022) Markerless motion capture system via kinematic analysis of angular lower limb. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khaleel Ibraheem, Amjed (2013) An application of artificial neural network classifier for medical diagnosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khamidi, Mohd. Faris (2005) Dry-masonry Brick House System as an "Adaptable Building" Model for Asian Markets. Doctoral thesis, Kyushu University.

Khamis, Norasyikin (2018) Perlaksanaan MS 2593:2015 (kod amalan kemudahan dan kediaman sementara pekerja tapak bina) di kalangan kontraktor gred 6 dan gred 7. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khatak, Umar Farooq (2022) Test case selection and prioritzation for object-oriented software based on slicing and coupling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khirotdin, Rd. Khairilhijra (2004) Manufacture of cylinders with axial imperfections. Masters thesis, University of Liverpool.

Kulian @ Abd Karim, Ernie (2004) Pembangunan WEBCD makmal geoteknik : ujikaji graviti tentu tanah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Lagiman, Syahidah (2017) Improvement of relationship between main contractor and subcontractor for successful construction project implementation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling, Felix Ngee Leh (2003) Simulation analysis of slope stability : a case study on slope failure at new laboratory of Faculty of Mechanical Engineering UTM. Masters thesis, Universiti Teknologi Malaysia.

M Elaswad, Ashraf Mahmood (2019) Solidification, microstructure and mechanical properties of mg-nd-gd-zn-zr cast magnesium alloy with yttrium, erbium and samarium additions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Isa, Siti Fazlina (2019) The effects of grass and rainfall pattern on the matric suction of acidic soil slopes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Juremi, Nor Rashidah (2012) Fabrication of periodic nanoparticle arrays using nanosphere lithography technique and thin film gold as electrically enhanced catalysts. Masters thesis, Universiti Tun Hussein Malaysia.

Md Noor, Nurazuwa (2006) Comparative study on structural behaviour of bonded and unbonded post-tensioned beam. Masters thesis, Universiti Putra Malaysia.

Md Noor, Nurazuwa (2014) Physical performance and durability evaluation of rubberized concrete. Doctoral thesis, Kyushu University.

Md Salleh, Salihatun (2011) Active intelligent control of vibration of flexible plate structures. Doctoral thesis, University of Sheffield.

Md Zain, Rasimah (2013) Penilaian integriti struktur robi test bed (road bridge interface test bed) di atas tanah lembut. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Memon, Aftab Hameed (2013) Structural modelling of cost overrun factors in construction industry. Doctoral thesis, Universiti Tun Hussein Malaysia.

Mohamad, Noridah (2010) The structural behaviour of precast lightweight foamed concrete sandwich panel as a load bearing wall. Doctoral thesis, Universiti Teknologi Malaysia.

Mohamad, Suriah (2003) Pengetahuan terhadap pembinaan item soalan esei di kalangan guru - guru kejuruteraan : suatu tinjauan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Suriah (2003) Pengetahuan terhadap pembinaan item soalan esei di kalangan guru - guru kejuruteraan : suatu tinjauan. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohamad Arifi, Nurliyana (2018) Fabrication of cu2o based homostructure thin films using electrodeposition method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Bahtiar, Wahieda (2012) Investigation on the mechanical and physical properties of treated and untreated woven sugar-palm fibre reinforced composite. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad Nasir, Nadia Nurnajihah (2014) Vibration simulation of plate with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad Noor, Noraishah (2011) Prediction of springback in the forming of advanced high strength steel: simulation and experimental study. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Rasidi, Shamsuri (2022) Development of subsonic curved diffuser performance correlations integrated angle of turns using asymptotic computational fluid dynamics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Mohammed Akram (2014) Quasiturbine rotor development optimization. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Ali, Ahmad Zurisman (2005) The effect of eccentricity at beam support to beam stiffness. Masters thesis, Universiti Teknologi Malaysia.

Mohd Hanifa, Rafizah (2022) Ethnic recognition system for malay language speakers using gammatone frequency cepstral coefficients pitch (GFCCP) and pattern classification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jaini, Zainorizuan (2008) Crack cronology of reinforced concrete beam under impact loads. Masters thesis, Swansea University.

Mohd Lajim, Faeizah (2003) Pembangunan modul pembelajaran mekanik tanah (DKA 2053) bagi pelajar kursus diploma kejuruteraan awam di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Noh, Nur Hanifah (2017) Employability of local trained skill labour in construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yunus, Mohd Fauzi (2003) Penghasilan modul pembelajaran lukisan kejuruteraan berbantukan komputer (CAD 3D). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Mohd Yusof, Khairul Nizar (2012) Composite foundations on Malaysian soft clay soil: applications of innovative techniques. Doctoral thesis, The University of Leeds.

Mokhatar, Shahrul Niza (2009) Finite element simulation of reinforced concrete slabs under impact loading. Masters thesis, Universiti Teknologi Malaysia.

Mokhtar, Mardiha (2011) Mechanical properties of soft clay stabilized with cement-rice husks (RH). Masters thesis, Universiti Tun Hussein Malaysia.

Mokhtar, Norfaniza (2011) Shear strength analysis of concrete beams reinforced with GFRP bars using strut and tie model. Masters thesis, Universiti Tun Hussein Malaysia.

Muhamad Yusoff, Hasyimunfazlie (2003) Pembangunan modul pembelajaran lukisan kejuruteraan awam bagi pelajar KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Muhammad, Jibril Adamu (2016) Improving selection practices of subcontractors on building construction project in Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapa, Mohammad Sukri (2010) Effect of second phase particle on fatigue crack growth behavior in microstructure controlled steels. Doctoral thesis, Nagaoka University of Technology.

Nai Chian, Voravit (2012) Meat color recognition using machine vision. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngadimon, Khairulnizam (2006) Design and simulation of hydraulic shaking table. Masters thesis, Universiti Teknologi Malaysia.

Nik Ismail, Nik Ainun (2014) Stress intensity factors of edge cracks in dissimilar joint plates. Masters thesis, Universiti Tun Hussein Malaysia.

Om Balkou, Mhimed Ramadan (2011) Computational study of shear strengthened of RC continuous beam using CFRP sheet with different wrapping scheme. Masters thesis, Universiti Tun Hussein Malaysia.

Othman, Mohd Syafiq Salman (2014) Investigating flush system method for minimum water usage of toilet system. Masters thesis, Universiti Tun Hussein Malaysia.

Othman, Safiah (2005) A numerical study of transient natural convection of water near its density extremum. Masters thesis, University of Strathclyde.

Qureshi, Suhail Asghar (2022) Double-layered metamaterial-based resonator operating at millimetre wave for detection of dengue virus. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramadan Dofan, Jamal Ali (2011) Study on thermal model for calculating transformer hot Spot temperature. Masters thesis, Universiti Tun Hussein Malaysia.

Ramzi Hannan, Nurul Izzati Raihan (2019) Acoustic and non-acoustic performance of coal bottom ash as sound absorptive material for reducing railway noise level. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rashd, Raja Banour (2016) Investigation of green material classification for green building in Libyan construction Industry. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rashed, Abdul Ghani (2004) Pembangunan interaktif cd-rom untuk subjek global positioning system (GPS) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Rashid, Farawaheeda (2004) Satu model awal jaminan kualiti bagi pendidikan berterusan kejuruteraan di Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Razman, Ruzaimah (2012) Thermal performance of residential house using interlocking compressed earth brick (ICEB) as an alternative wall material. Masters thesis, Universiti Tun Hussein Malaysia.

Rejab, Muhammad Nazri (2013) Finite element analysis of mechanical properties for 2D woven kenaf composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sa'ude, Nasuha (2016) Layered manufacturing of polymer matrix composites (PMC) materials via fused deposition modeling (FDM). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saaidin, Syazwi Hakimi (2021) The performance of concrete containing fine recycled concrete aggregate (FRCA) and fine crumb rubber (FCR) as partial fine aggregate replacement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabdin, Saiful Din Sabdin (2014) The effect of heat compression on mechanical behaviour and moisture content of pineapple leaf fibre and sugarcane bagasse waste for plate disposal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabtu@Othman, Hilyati (2009) Life cycle cost analysis for the repair of a ferry terminal jetty structure. Masters thesis, Universiti Teknologi Malaysia.

Saiman, Mohd Fahmi (2014) 2 dimension woven kenaf reinforced unsaturated polyester composite. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Mariam (2013) Comparison of rhombic type micromixer to improve mixing efficiency in biomems application. Masters thesis, Universiti Tun Hussein Malaysia.

Saryanto, Hendi (2011) High temperature oxidation behaviour of nanocrystalline Fe80Cr20 alloys and ferritic steel implanted with lanthanum and titanium. Masters thesis, Universiti Tun Hussein Malaysia.

Sauti, Noor Suhaiza (2022) GIS-based earthquake disaster management system for seismic risk assessment: a case study of Sabah and Pahang, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sepeeh, Muhamad Syazmie (2022) Sensorless induction motor speed control for electric vehicles using enhanced hybrid flux estimator with ann-ifoc controller. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shahidan, Shahiron (2009) Behaviour of steel fiber reinforced concrete slab due to volume fraction of fiber. Masters thesis, Universiti Putra Malaysia.

Shahidan, Shahiron (2014) Damage classification in reinforced concrete beam by acoustic emission signal analysis. Doctoral thesis, Universiti Sains Malaysia.

Soo, Poey Lam (2012) Analysis of the flow characteristic inside a heated and unheated horizontal rifled tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suki, Nauwal (2011) Flexural analysis of concrete beams longitudinally reinforced with GFRP bars using discrete element model. Masters thesis, Universiti Tun Hussein Malaysia.

Sulaiman, Suhaizad (2011) Water permeability and carbonation on foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Malaysia.

Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Malaysia.

Sulong, Nurulsaidatulsyida (2022) Photo-degradation of renewable biopolymer blended with thermoplastic high density polyethylene (HDPE). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Suriani, Nor Surayahani (2006) Vessels classification. Masters thesis, Universiti Teknologi Malaysia.

Syed Ahmad, Syarifah Nur Aqida (2004) Proposity study and effects on mechanical properties of discontinuous reinforced metal matrix composite (DRMMC). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Syed Mohamad, Syed Burhanuddin Hilmi (2005) Corrosion assessment on reinforced concrete and its service life prediction. Masters thesis, Universiti Putra Malaysia.

Tan, Wee Choon (2008) Characteristics of plates embedded with shape memory alloy wires. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tang, Bee Lin (2011) Revitalisation of organic and peat soils. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tukiman, Mohd Mustaqim (2022) The effect of ignition timing on engine performance and combustion behaviour of LPG-SI engine using lsi system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Usoff, Mohd Yuzha (2004) Penghasilan perisian P&P berasaskan CD-ROM interaktif bagi topik Unjuran Stereografik dalam mata pelajaran Geologi Kejuruteraan (BKA 3023), di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Usoff, Mohd Yuzha (2004) Penghasilan perisian P&P berasaskan CD-ROM interaktif bagi topik Unjuran Stereografik dalam mata pelajaran Geologi Kejuruteraan (BKA 3023), di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

V. Doraisamy, Sunitha (2004) Pembangunan modul pembelajaran kejuruteraan rekabentuk struktur bagi kursus kejuruteraan awam di politeknik. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wahab, Md Saidin (2008) Selective laser sintering of polymer nanocomposites. Doctoral thesis, University of Leeds.

Wan Ibrahim, Mohd Haziman (2011) Engineering properties and microstructure of brickwork under aggressive environment. Doctoral thesis, Universiti Sains Malaysia.

Wan Ibrahim, Mohd Haziman (2004) Water permeability of foamed concrete. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Wan Zahari, Wan Zubaidie (2017) The effect of surface treatment on composite interface, tensile properties and water absorption of suger palm fiber/polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wong, Kah Leong (2010) Structural behaviour of pre-fabricated composite pad footing foundation using cold-formed steel lipped channel sections. Masters thesis, Universiti Teknologi Malaysia.

Yahya, Siti Asia (2016) Characterizations of Malaysia PALF properties between hand scrapping and PALF M1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yeoh, David Eng Chuan (1999) Strength of structural timber members with finger-joints and metal plate connectors. Masters thesis, Universiti Teknologi Malaysia.

Zainal Abidin, Mohamad Rusydi (2017) Pencirian pelindungan laga tiub silinder fungsi gentian semula jadi/epoksi bergred menggunakan emparan mendatar. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Zuhairiah (2003) Image compression and encryption. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zainulabidin, Muhd Hafeez (2007) Analysis of the vibration characteristics of a strongly coupled liquid-structure-gas system. Doctoral thesis, University of Strathclyde.

Zakaria, Mohd Zaim (2004) Pembangunan video dokumentari pendidikan bagi mata pelajaran teknologi konkrit. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zakaria, Muhammad Nizam (2005) A study on non-friction contact problem with large deformational analyses. Masters thesis, Saga University.

Zamri Tan, Nurul Zakiah (2012) Step-NC code generator for drilling operation using GEN-M. Masters thesis, Universiti Tun Hussein Malaysia.

Zinal, Nabiah (2004) Sensor material characterisation for magnetometer application. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.

Zulkarnain, Maizul Haffin (2013) Design and simulation study of obstacle based passive micromixer. Masters thesis, Universiti Tun Hussein Malaysia.

This list was generated on Thu Mar 28 20:03:11 2024 +08.