Items where Year is 2012

Group by: Creators | Item Type | No Grouping

Number of items: 207.

A. H., Juliana and M. T., Paridah and U. M. K., nwar (2012) Properties of three-layer particleboards made from kenaf (Hibiscus cannabinus L.) and rubberwood (Hevea brasiliensis). Materials and Design, 40. pp. 59-63. ISSN 0261-3069

A. Rahman, K. A. and B. S. K. K., Ibrahim and A. Jamil, M. M. and Leman, A. M. (2012) The development of control system via Brain Computer Interface (BCI) - Functional Electrical Stimulation (FES) for paraplegic subject. International Journal of Integrated Engineering, 4 (3). pp. 59-64.

A. Rahman, K. A. and Ibrahim, B. S. K. K (2012) Fundamental study on brain signal for BCI-FES System Development. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

A. Rahman, K. A. and Ibrahim, B. S. K. K. and Leman, A. M. and A. Jamil, M. M. (2012) Fundamental study on brain signal for bci-fes system development. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Ab. Halim, Haizum Hanim (2012) Penilaian keberkesanan kit pengajaran transistor bagi aliran vokasional. Masters thesis, Universiti Tun Hussein Malaysia.

Abd. Rahman, Hamimah and Muchtar, Andanastuti and Haron, Syaharizan and Muhamad, Norhamidi and Abdullah, Huda (2012) Kesan parameter pemprosesan dan bahan tambah terhadap pengendapan elektroforetik filem LSCF6428. Sains Malaysiana, 41 (2). pp. 237-244. ISSN 0126-6039

Abd. Rahman, Hamimah and Muchtar, Andanastuti and Muhamad, Norhamidi and Abdullah, Huda (2012) Structure and thermal properties of La0.6Sr0.4Co0.2Fe0.8O3�d–SDC carbonate composite cathodes for intermediate- to low-temperature solid oxide fuel cells. Ceramics International, 38. pp. 1571-1576. ISSN 0272-8842

Abd.Hadi, Faezah (2012) The development of solar irriadiation levelling system using colour contour approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Nor Aziati and Salim, Juhana (2012) Developing a conceptual framework of knowledge transfer in Malaysia E-Government IT outsourcing: an integration with transactive memory system. Journal of Information Retrieval and Knowledge Management, 2. pp. 40-59.

Abdul Hamid, Norhamreeza (2012) The effect of adaptive parameters on the performance of back propagation. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Kadir, Aeslina and Abdullah, Alida and Lee, Kah Wai (2012) Study on Ferum (Fe) and Zinc (Zn) removal by using rice bran at Sungai Pelepah, Kota Tinggi, Johor. Advances in Environmental Biolow -", 7 (12). pp. 3580-3586.

Abdul Kadir, Aeslina and Mohd Zahari, Nur Azian and Mardi, Noor Azizi (2012) Utilization of palm oil waste into fired clay brick. Advances in Environmental Biology, 7 (12). pp. 3826-3834. ISSN 1995-0756

Abdul Kadir, Aeslina and Puade, Azi Zatika (2012) The utilisation of Activated Carbon (AC) from palm shell waste to treat textile wastewater. Advances in Environmental Biology, 7 (12). pp. 3621-3627. ISSN 1995-0756

Abdul Rahim, Muhd Halalluddin (2012) Design and simulation of three phase rectifier with power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Shaib, M. Fadzli and Abdul Rahim, Ruzairi and M. Muji, Siti Zarina and Leow, Pei Ling and Abdul Jamil, M. Mahadi (2012) A study on optical sensors orientation for tomography system development. Sensors & Transducers Journal, 140 (5). pp. 45-52. ISSN 1726-5479

Abdul Sukora, Jumadi and Redmond, S J and Chan, G S H and Lovell, N H (2012) Signal quality measures for unsupervised blood pressure measurement. Physiological Measurement, 33 (3). pp. 465-486. ISSN 0967-3334

Abdullah, Abd Halid and Fan Wang, Fan Wang (2012) Design and low energy ventilation solutions for atria in the tropics. Sustainable Cities and Society, 2. pp. 8-28.

Abdullah, Noor Farahdila (2012) Velocity profile compliance for a wheeled mobile robot. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Noorsaliza (2012) VHF adaptive antenna using a rear defogger. Doctoral thesis, Shizuoka University.

Abdullah, Nur Munirah (2012) Characterization and treatment of titanium dioxide, TiO2 via ultrasonic process with melastoma malabathricum as sustainable sensitizer for photovoltaic slar cell. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zailani (2012) A hybrid model for discovering significant patterns in data mining. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah Bamatraf, Abdullah Omar (2012) An improved digital watermarking algorithm using combination of least significant bit (LSB) and inverse bit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Hasan, Zorkeﬂee and Hamidon, Nuramidah and Yusof, Mohd Sufﬁan and Ab Ghani, Aminuddin (2012) Flow and sediment yield simulations for Bukit Merah Reservoir catchment, Malaysia: a case study. Water Science & Technology, 66 (10). pp. 2170-2176. ISSN 0273-1223

Abu Seman, Noor Aslinda and Zakuan, Norhayati and Jusoh, Ahmad Yusni and Md Arif, Mohd Shoki (2012) Green supply chain management: a review and research direction. International Journal of Managing Value and Supply Chains (IJMVSC), 3 (1). pp. 1-18.

Adon, Mohamad Nazib and Dalimin, M. Noh and Abdul Jamil, Muhammad Mahadi and Mohd Kassim, Norazan (2012) Development of high voltage pulse inducement method for biological cell. In: 2012 International Conference on Biomedical Engineering (ICoBE),, 27-28 February 2012, Penang.

Adon, Mohamad Nazib and Dalimin, M. Noh and Abdul Jamill, Muhammad Mahadi and Mohd Kassim, Norazan and Hamdan, Sallehhuddin (2012) Study of effect of microsecond pulsed electric fields on threshold area of HeLa Cells. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Agustian, Egi (2012) Production of biodiesel from waste cooking oil using ultrasonic tubular reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Kamilah (2012) The use of management accounting practices in Malaysian SMEs. Doctoral thesis, University of Exeter.

Ahmad, M. K. I. and Ibrahim, B. S. K. K. and Rahman, K. A. A. and Masdar, A. and Nasir, N. H. M. and Abdul Jamil, M. Mahadi (2012) Knee JointImpedanceHybrid Modeling and Control of Functional Electrical Stimulation (FES)-Cyclingfor Paraplegic: Free Swinging trajectory. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 7th - 19th December 2012, Langkawi.

Ahmad, M. K. I. and Ibrahim, B. S. K. K. and Rahman, K. A. A. and Masdar, A. and Nasir, N. H. M. and Abdul Jamil, Mahadi (2012) Knee joint impedance hybrid modeling and control of Functional Electrical Stimulation (FES)-cyclingfor paraplegic: free swinging trajectory. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Ahmad, Madya Herawati (2012) Isu-isu penguatkuasaan terhadap penilaian kesan ke atas alam sekeliling (EIA) bagi projek perumahan di kawasan lereng bukit, kajian kes: Negeri Selangor Darul Ehsan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nur Darina (2012) Modeling thermal model of a disk coil with directed oil flow using matlab software. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad, Nurazwa and Othman, Siti Norezam and Mad Lazim, Halim (2012) A review of technological capability in Malaysian manufacturing sector. In: Proceedings International Conference of Technology Management, Business and Entrepreneurship 2012 (ICTMBE2012),, 18-19 Dec 2012, Renaissance Hotel, Melaka, Malaysia.

Ainuddin, Ainun Rahmahwati and Hakiri, Norio and Muto, Hiroyuki and Matsuda, Atsunori (2012) Micropatterning of non-crystalline methylsilsesquioxane–titania hybrid films based on their structural changes with UV irradiation. Physica Status Solidi A. pp. 1-7. ISSN 1862-6300

Ainuddin, Ainun Rahmahwati and Ishigaki, Tomonori and Hakiri, Norio and Muto, Hiroyuki and Sakai, Mototsugu and Matsuda, Atsunori (2012) Inﬂuence of UV irradiation on mechanical properties and structures of sol–gel-derived vinylsilsesquioxane ﬁlm. Journal of the Ceramic Society of Japan, 120 (10). pp. 442-445. ISSN 1348-6535

Ajer, Mohd Razali (2012) Studies of epoxy powder coated galvanized steel substrate via electrostatic powder coating system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Akasah, Zainal Abidin and David Yeoh, David Yeoh and Lam, Kah Leong (2012) Analytical assessment for comparisons of triple-t precast concrete-timber composite floor using gamma method. / International Journal of Engineering Research and Applications (IJERA), 2 (6). pp. 1337-1355.

Alhaji, Idris Adamu (2012) The relationship between corporate governance attributes and firm performance. Masters thesis, Universiti Tun Hussein Malaysia.

Alias, Maizam and Akasah, Zainal Abidin and Kesot, Mohd Jahaya (2012) Self-efficacy, locus of control and attitude among engineering students: appreciating the role of affects in learning efforts. Procedia - Social and Behavioral Sciences, 56. pp. 183-190.

Alias, R. and Abd-Alhameed, R. A. and Excell, P. S. (2012) A conducting domain surface boundary applied to hybrid FEM-FDTD Electromagnetic Models. International Journal of Advanced Computer Science and Applications, 2 (10). pp. 382-384. ISSN 2156-5570

Alias, R. and Abd-Alhameed, R. A. and Excell, P. S. (2012) A conducting domain surface boundary applied to hybrid FEM-FDTD Electromagnetic models. International Journal of Advanced Computer Science and Applications, 2 (10). pp. 382-384.

Aliyu, Aliyu Ahmad (2012) Impact of intangible location attributes on residential property value in Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Almarghani, Khaled Ali. O. (2012) Detection and tracking for radar simulation using MATLAB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anuar, N. F. and M. Jamail, N. A. and A. Rahman, R. and Kamarudin, M. S. (2012) Breakdown characteristic analysis of paper- oil insulation under AC and DC voltage. In: International Research and Innovation Summit (IRIS2017), 6–7 May 2017, Melaka, Malaysia.

Anwar Lashari, Tahira and Alias, Maizam and Akasah, Zainal Abidin and Kesot, Mohd Jahaya (2012) An affective¬cognitive teaching and learning framework in engineering education. ASEAN Journal of Engineering Education, 1 (1). pp. 11-24.

Atomi, Walid Hasen (2012) The effect of data preprocessing on the performance of artificial neural networks techniques for classification problems. Masters thesis, Universiti Tun Hussein Malaysia.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) Comparative evaluation QoS of FTP over LEO and GEO Satellite Networks with diffserv architecture. Journal of Communication and Computer, 9. pp. 1383-1394.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) Comparative evaluation QoS of FTP over LEO and GEO satellite networks with diffserv architecture. Journal of Communication and Computer, 9. pp. 1383-1394.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) QoS Simulation and analysis of HTTP over LEO satellite constellation. Journal of Communications and Networking, 3. pp. 1-12.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2012) QoS simulation and analysis of HTTP over LEO satellite constellation. Journal of Communications and Networking. pp. 1-12.

Azhari, Azliyana (2012) Polycyclic aromatic hydrocarbons (PAHs) in air and vegetation: case study at three selected toll stations along North South Expressway in Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aziz, Muhamad Fikri (2012) The experimental study of partial discharge of Malaysian based palm oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Ashraf Zulfa (2012) Structural equation modelling and system dynamic in the detection of power quality events. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azman, Mohamed Nor Azhari and S Ahamad, Mohd Sanusi and Abd Hamid, Zuhairi and Gomez, Christy P and Mohamad Kamar, Kamarul Anuar and Hilmi, Nur Diyana and Mansor, Hezil and Ismail, Zulkefle (2012) The selection of IBS precast manufacturing plant in Malaysia using GIS. Malaysian Construction Research Journal, 10 (1). pp. 77-90. ISSN 1985-3807

Azmi, Mohd Azham (2012) Fabrication and characterisation of sandwich composites of glass fiber skin and polyurethane foamreinforced coconut coir fiber core. Masters thesis, Universiti Tun Hussein Malaysia.

Bahtiar, Siti Fazreena Idayu (2012) Modelling the knowledge management processes for planning and scheduling of construction projects based on state-of-the-art technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bareduan, Salleh Ahmad and Hasan, Sulaiman (2012) Methodology to develop heuristic for re-entrant flow shop with two potential dominant machines using bottleneck approach. International Journal of Combinational Optimization Problems & Informatics, 3 (3).

Basri, Hatijah (2012) Development of hybrid antibacterial membrane by incorporating silver particle with 2,4,6-triaminopyrimidine as compatibilizer. Doctoral thesis, Universiti Teknologi Malaysia.

Bidin, Mohamed Noor Azman (2012) Voltage tracking of DC-DC CUK converter using neural network control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bong, Siaw Wee (2012) Adaptive differential amplitude pulse-position modulation technique (DAPPM) using fuzzy logic for optical wireless communication channels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bux @ Imran Latif, Qadir (2012) Critical impact energy for local impact damage of hard projectile on concrete slab. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chan, Hwang See and Abd-Alhameed, Raed A. and Z. Abidin, Zuhairiah and J. McEwan, Neil and S. Excell, Peter (2012) Wideband printed MIMO/diversity monopole antenna for wifi/WiMAX applications. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 60 (4). pp. 2028-2035.

Chan, Hwang See and Abd-Alhameed,, Raed A. and Z. Abidin, Zuhairiah and J. McEwan, Neil and S. Excell, Peter (2012) Wideband printed MIMO/Diversity Monopole Antenna for WiFi/WiMAX applications. IEEE TRANSACTIONS ON ANTENNAS AND PROPAGATION, 60 (4). pp. 2028-2035.

Chan, Wen Shan (2012) Characteristics of developed flexible polyurethane foams reinforced with coconut coir fibres and recycled tyres. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dahlan, Samsul Haimi (2012) Contribution to the body of revolution finite-difference time domain (BoR-FDTD) method - implementations of hybrid and multi-resolution approaches for fast simulation of electrically large axis-symmetrical antenna structures. Doctoral thesis, Universite De Rennes.

David Daniel, Basil (2012) The impacts of neighbourhood traffic management. Doctoral thesis, University of Canterbury.

Dharmaraj, Philips (2012) Modeling of three phase inverter for photovoltaic application. Masters thesis, Universiti Tun Hussein Malaysia.

Elfallah, Saleh S Saleh (2012) Analysis of mechanical properties and microstructure of multiple die cavity products produced in vertical and horizontal arrangement by gravity die casting. Masters thesis, Universiti Tun Hussein Malaysia.

Firdianto, Ade (2012) Ultrasonic treatment with nickel electroplating combined with oxidation for developing γ-Al2O3 washcoat on Fe-Cr-Al substrate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Habeeb, Sinan Abood (2012) The influence of temperature and types of filter media on the palm oil mill effluent (POME) treatment using the hybrid up-flow anaerobic sludge blanket (HUASB) reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Hasri (2012) Indoor performance of wireless sensor network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Haron, Zaiton and Othman, Mohd Hanifi and Yahya, Khairulzan and Yaacob, Haryati and Hainin, Mohd. Rosli and Mohd Yusof, Mohd Badruddin (2012) Noise produced by transverse rumble strips: a case study on rural roadways. IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE), 1 (5). pp. 12-16.

Hasan, Azman (2012) Instrumen penilaian pembimbing dalam pelaksanaan pembelajaran berasaskan kerja pelajar di industry. Doctoral thesis, Universiti Teknologi Malaysia.

Hasbullah, Amilia (2012) Kajian penilaian prestasi komiti sekolah dalam pengurusan fasiliti di sekolah dasar di Kabupaten Batubara, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, M. K. and Azubir, N. A. M. and H. M. I., Nizam and Toha, S. F. and Ibrahim, B. S. K. K. (2012) Optimal design of electric power assisted steering system(EPAS) using GA-PID method. International Symposium on Robotics and Intelligent Sensors 2012, 41. p. 614.

Hendi Gareh, Saleh Ali Ahmed (2012) Voltage stability assessment for distrbuted generation in islanded microgrid system. Masters thesis, Universiti Tun Hussein Malaysia.

Husaini, Noor Aida (2012) The Jordan Pi-Sigma neural network for temperature prediction. Masters thesis, Universiti Tun Hussein Malaysia.

Hussein Al-Amri, Ali Abdullah (2012) The total quality management practices in Yemeni Public Universities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, B. S. K. K. and M. A, N. Aziah and Ahmad, S. and R., Akmeliawati (2012) Fuzzy-based temperature and humidity control for HVAC of electric vehicle. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 904-910.

Ibrahim, B.S.K.K. and M. A., N. Aziah and Ahmad, S. and Akmeliawati, R. and H. M. I, Nizam and A. G. A., Muthalif and S. F., Toha and M. K., Hassan (2012) Fuzzy-based temperature and humidity control for HVAC of electric vehicle. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 904-910.

Ibrahim, Ihfasuziella (2012) Pembangunan model caj ruang bagi pengurusan ruang akademik yang optimum di Institusi Pengajian Tinggi, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Halim Irwan (2012) Kebolehacuanan suntikan logam mikro SS 316L menggunakan bahan pengikat PEG dan PMMA Mohd. Doctoral thesis, Universiti Kebangsaan Malaysia.

Ibrahim, Noor Azliza (2012) Modelling of micro hydroelectric system design. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail, Al Emran and Ahmad Kamal Ariffin, Ahmad Kamal Ariffin and Abdullah, Shahrum and Ghazali, Mariyam Jameelah and Abdulrazzaq, Mohammed and Daud, Ruslizam (2012) Stress intensity factors under combined bending and torsion moments. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering), 13 (1). pp. 1-8. ISSN 1673-565X

Ismail, Al Emran and Arifﬁn, A.K. and Abdullah, S. and Ghazali, M.J. (2012) Stress intensity factors for surface cracks in round bar under single and combined loadings. Meccanica, 47 (5). pp. 1141-1156. ISSN 0025-6455

Ismail, Lindawati (2012) Acoustic and durability performances of Arenga Pinnata panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Rozmi and Hafezi, Mohammad Hesam and Mohd Nor, Rahim and Ambak, Kamarudin (2012) Passengers preference and satisfaction of public transport in Malaysia. Australian Journal of Basic and Applied Sciences, 6 (8). pp. 410-416. ISSN 1991-8178

Jalil, Azlis Sani and Md Dawal, Siti Zawiah and Mohmad Zakwan, Norhayati (2012) Human performance in transportation a comparative study of human performance models. IACSIT International Journal of Engineering and Technology, 4 (2). pp. 111-115. ISSN 1793-8236

Jamaian, Siti Suhana (2012) Homogenization studies for optical sensors based on sculptured thin films. Doctoral thesis, University of Edinburgh.

Jamali, Siti Hasmah (2012) Voltage tracking of DC-DC boost converter using gaussian fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamel, Sapi’ee (2012) The hybrid cubes encryption algorithm (HiSea). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jamian, J. J. and Mustafa, M. W. and Mokhlis, H. and Abdullah, M. N. (2012) Comparative study on distributed generator sizing using three types of particle swarm optimization. In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation, 8-10 Feb. 2012.

Jamian, J. J. and Mustafa, M.W. and Mokhlis, H. and Abdullah, M. N. (2012) Comparative study on distributed generator sizing using three types of particle swarm optimization. In: 2012 Third International Conference on Intelligent Systems Modelling and Simulation, 8-10 Feb. 2012.

Jamian, Saifulnizan (2012) Application of functionally graded materials for severe plastic deformation and smart materials: experimental study and finite element analysis. Doctoral thesis, Nagoya Institute of Technology.

Jamian, Saifulnizan and Sato, Hisashi and Fujiwara, Eri Miura and Yoshimi, Watanabe (2012) Experimental study on severe plastic deformation of Ti by novel equal-channel angular pressing. Japanese Journal of Applied Physics, 51 (1). pp. 1-7. ISSN 0021-4922

Johar, Siti Sarawati (2012) The influence of emotional intelligence and self-esteem among employee towards organizational commitment in public sector. Global Journal of Management and Business Research Administration and Management, 14 (1). ISSN 2249-4588

Johar, Siti Sarawati and Mad Shah, Ishak and Abu Bakar, Zainudin (2012) The impact of emotional intelligence towards relationship of personality and self-esteem at workplace. Procedia - Social and Behavioral Sciences, 65. pp. 150-155. ISSN 1877-0428

Kamaril Yusoff, Mohd Ashiq and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Wireless mobile robotic arm. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 1072-1078.

Kamarudin, Noor Hasliza (2012) Reinforcement of rice husk in ceramic shell mould system for investment casting process. Masters thesis, Universiti Tun Hussein Malaysia.

Kassim, Noraniah (2012) New technique of producing removable complete denture using rapid tooling approach. Masters thesis, Universiti Tun Hussein Malaysia.

Khaerudini, D. S. and Sebayang, D. and Mahzan, S. and Untoro, P. (2012) Thermal stability of nanostructured iron– chromium alloys for interconnect application of solid oxide fuel cells. Corrosion Engineering, Science and Technology, 47 (7). pp. 536-552.

Ling, Chak Ung (2012) Analytical hierarchy approach for load shedding scheme: a case study based on the Johor System. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M Khalifa, Tarek M. (2012) The flight trajectory analysis on the existing aircraft. Masters thesis, Universiti Tun Hussein Malaysia.

M., Zaleha and S., Mahzan and Maizlinda Izwana, Maizlinda Izwana (2012) A review on the mechanical and physical properties of natural fiber composites. Applied Mechanics and Materials, 229 (231). pp. 276-281. ISSN 1660-9336

M. A., A. Rahman and Akasah, Z. A. and Zuraidi, S. N. F. (2012) The importance of on-going maintenance in preserving the heritage listed buildings. International Journal on Advanced Science Engineering Information Technology, 2 (2). pp. 83-85.

M. M., Nordiana and Rosli, S. and M. Nawawi, M. N. and I., N. Azwin and I. N. E., Hidayah and Z. A. M., Hazreek and A. B., Andy and M., Saidin (2012) Improved subsurface mapping by enhancing resistivity horizontal resolution. In: 5th Saint Petersburg International Conference & Exhibition, 2-5 April 2012, Saint Petersburg, Russia,.

Mahmod, Luqman Hakim (2012) Improvement of the SAG ampacity carrying level of existing 275 kV overhead line tower by using the re-conductoring approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masdar, Aizan and Ibrahim, B. S. K. K. and Abdul Jamil, M. Mahadi (2012) Development of low-cost current controlled stimulator for paraplegics. International Journal of Integrated Engineering, 4 (3). pp. 40-47.

Masdar, Aizan and Ibrahim, B. S. K. K. and Abdul Jamil, Mahadi (2012) Development of wireless-based low-cost current controlled stimulator for patients with spinal cord injuries. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Masdar, Aizan and Ibrahim, B.S. K. K. and Abdul Jamil, M. Mahadi (2012) Development of wireless-based low-cost current controlled stimulator for patients with spinal cord injuries. In: 2012 IEEE EMBS International Conference on Biomedical Engineering and Sciences, 17th - 19th December 2012, Langkawi.

Masek, Alias (2012) The effects of problem based learning on knowledge acquisition, critical thinking, and intrinsic motivation of electrical engineering students. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Masood, Ibrahim (2012) A scheme for balanced monitoring and accurate diagnosis of bivariate process mean shifts. Doctoral thesis, Universiti Teknologi Malaysia.

Mat Aris, Siti Khairani (2012) Alihan kerjaya pekerja bidang teknikal kepada bidang pendidikan dalam kalangan pengajar MTUN. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Yamin, Mohd Khairuddin (2012) Voltage uprating of existing 275kV overhead transmission line tower for increasing the power transfer capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

McNeil, David A. and Sadikin, Azmahani and Bamardouf, Khalid H. (2012) A mechanistic analysis of shell-side two-phase ﬂow in an idealised in-line tube bundle. International Journal of Multiphase Flow, 45. pp. 53-69. ISSN 0301-9322

Md Amin Hamzas, Mohd Fidzwan and Ahmad Bareduan, Salleh and Hussin, M.S. and Hasnul, M.J. (2012) Performance evaluation of m3 bottleneck based heuristic for M1M2M3 flow shop. International Review of Mechanical Engineering (IREME), 6 (6). pp. 1253-1256.

Md Juremi, Nor Rashidah (2012) Fabrication of periodic nanoparticle arrays using nanosphere lithography technique and thin film gold as electrically enhanced catalysts. Masters thesis, Universiti Tun Hussein Malaysia.

Md Nor, Danial and Abd. Wahab, M. Helmy and M. Jenu, M. Zarar and Ogier, Jean-Marc (2012) A new visual signature for content-based indexing of low resolution documents. Journal of Information Retrieval and Knowledge Management, 2. pp. 88-95.

Md Salleh, Md Zakir (2012) Keberkesanan mengkudu (morinda citrifolia) dan mikroorganisma efektif terhadap prestasi ayam pedaging bagi mencapai konteks perniagaan hijau dalam industri ternakan ayam di Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Md. Yassin, Azlina and Bond, Sandy and McDonagh, John (2012) Principles for sustainable riverfront development for Malaysia. Journal of Techno-Social, 4 (1). pp. 21-36.

Md. Yassin, Azlina and Shareh Musa, Sharifah Meryam (2012) Kelestarian pembangunan hadapan Air di Malaysia. Akademika, 82 (2). pp. 3-13.

Mohamad, Diana and Saji, Nurdalila (2012) PTS and the built environment in George Town, Penang. Developing Country Studies, 2 (11). pp. 214-219. ISSN 2224-607X

Mohamad, E.J. and A. Rahim, R. and Leow, P.L. and Rahiman, M.H. Fazalul and Marwah, O.M.F. and Nor Ayob, N.M. and A. Rahim, H. and Mohd Yunus, F.R. (2012) An introduction of two differential excitation potentials technique in electrical capacitance tomography. Sensors and Actuators A, 180. pp. 1-10. ISSN 0924-4247

Mohamad, Elmy Johana (2012) A segmented capacitance tomography for visualizing material distributions in pipeline conveying crude palm oil. Doctoral thesis, Universiti Teknologi Malaysia.

Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Leow, Pei Ling and Rahiman, Mohd Hafiz Fazalul and Marwah, Omar Mohd Faizan and Nor Ayob, Nor Muzakkir (2012) Segmented capacitance tomography electrodes: a design and experimental verifications. IEEE Sensors Journal, 12 (5). pp. 1589-1598. ISSN 1530-437X

Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Leow, Pei Ling and Rahiman, Mohd Hafiz Fazalul and Marwah, Omar Mohd Faizan and Nor Ayob, Nor Muzakkir and Rahim, Herlina Abdul and Mohd Yunus, F.R. (2012) An introduction of two differential excitation potentials technique in electrical capacitance tomography. Sensors and Actuators A: Physical, 180 (NIL). pp. 1-10. ISSN 0924-4247

Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Leow, Pei Ling and Rahiman, Mohd. Haﬁz Fazalul and Marwah, Omar Mohd. Faizan and Nor Ayob, Nor Muzakkir (2012) Segmented capacitance tomography electrodes: a design and experimental veriﬁcations. IEEE Sensors Journal, 12 (5). pp. 1589-1598. ISSN 1530-437X

Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Mohd Muji, Siti Zarina (2012) Electronic design of portable ECT for crude palm oil quality monitoring system. International Journal of Innovative Computing, Information and Control, 8 (1 (B)). pp. 867-898. ISSN 1349-4198

Mohamad, Elmy Johana and Mohamed, Muhammad Afiq Zimam and Abdul Rahim, Ruzairi and Leow, Pei Ling and Rahiman, Mohd Hafiz Fazalul and Abas, Khairul Hamimah and Bunyamin, Salinda (2012) Sensor modeling for portable electrical capacitance tomography system using simulation by comsol multiphysics. International Journal of Innovative Computing, Information and Control, 8 (10 (B)). pp. 6999-7016. ISSN 1349-4198

Mohamad, Mahathir (2012) Soliton cellular automata constructed from a Uq(Dn[1])-crystal Bn,1 and kirillov-reshetikhin type bijection for Uq(E6[1])-crystal B6,1. Doctoral thesis, Osaka University.

Mohamad Bahtiar, Wahieda (2012) Investigation on the mechanical and physical properties of treated and untreated woven sugar-palm fibre reinforced composite. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad Narsardin, Mohamad Adhar (2012) Voltage tracking of a DC-DC buck converter using neural network control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Masnani and Lee, Ri Quan and Ahmad, Ida Laila and Lee, Chee Chuan and Hamid, Siti Hanira (2012) Determination of angry condition based on EEG, speech and heartbeat. International Journal on Computer Science and Engineering (IJCSE), 4 (12). pp. 1987-1909. ISSN 0975-3397

Mohamed Zarti, Almehdi (2012) Gas turbine performence based creep life estimation using soft computing technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Ali Abusalah Elmabrok (2012) Financial situation of PN17 companies listed in the Malaysian Stock Exchange. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Halid, Nurul Nadhilah (2012) Kesediaan pelajar politeknik kejuruteraan elektrik dalam menceburi bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jasni, Mohd Safuwan and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Biological inspired inspection underwater robot (SNAKEY). International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 1058-1064.

Mohd Jasni, Mohd Safuwan and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Biological inspired inspection underwater robot (SNAKEY). In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), Sep 4, 2012 - Sep 6, 2012, Sarawak..

Mohd Jasnia, Mohd Safuwan and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Biological inspired inspection underwater robot (SNAKEY). In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012, Sep 4, 2012 - Sep 6, 2012, Sarawak..

Mohd Muhsein Taib, Mohd Muhsein (2012) Experimental investigation on the feasibility and durability of a novel diesel particulate filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Ahmad Shukri (2012) Neighbour replica affirmative adaptive failure detection and autonomous recovery. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Mohd Azree (2012) Environmental noise analysis of aged ceramic insulator under influence of electrical stress. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Mohd Fahrurazi (2012) Development of step-compliant system for turn-mill operations. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Yusof, Khairul Nizar (2012) Composite foundations on Malaysian soft clay soil: applications of innovative techniques. Doctoral thesis, The University of Leeds.

Mohd Yusof, Shabanun Salwa (2012) Ecology and morphology of household ant, Paratrechina longicornis (LATREILLE, 1802) In South Eastern of Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Zin, Nur Shaylinda and Abdul Aziz, Hamidi and Mohd Adlan, Nordin and Ariffin, Azlan and Yusoff, Mohd Suffian (2012) Understanding the use of chemical and natural coagulants in the coagulation process: a review. Caspian Journal of Applied Sciences Research, 2. pp. 300-308.

Mohd. Khalid, Halimi and Zainol, Nur Zainatul Nadra and Samian, Abdul Latif (2012) Konsep Al Asma Al Husna asas pembinaan falsafah ilmu kejuruteraan Islam. In: Seminar Falsafah dan Tamadun 2018 (SEFATA 2018), 12 Nov 2018, USM.

Mohmad Hassim, Yana Mazwin and Ghazali, Rozaida (2012) Training a functional link neural network using an artificial bee colony for solving a classification problems. JOURNAL OF COMPUTING, 4 (9). pp. 110-115.

Mohmad Hassim, Yana Mazwin and Ghazali, Rozaida (2012) An approach to improve functional link neural network training using modified artificial bee colony for classification task. Jurnal Teknologi Maklumat dan Multimedia Asia-Pasifik, 2 (2). pp. 63-71.

Mohmad Hassim, Yana Mazwin and Ghazali, Rozaida (2012) An approach to improve functional link neural network training using modified artificial bee colony for classification task. ASIA-PACIFIC JOURNAL OF INFORMATION TECHNOLOGY AND MULTIMEDIA, 2 (2). pp. 63-71. ISSN 2289-2192

Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.

Morrison Buah, Lorothy (2012) Supervisory control for conventional unitary air conditioning system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Najwa (2012) Processibility of black garbage bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Malaysia.

Nai Chian, Voravit (2012) Meat color recognition using machine vision. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Ban Kiong and Akasah, Zainal Abidin (2012) Analysis building maintenance factors for IBS precast concrete system: a review. / International Journal of Engineering Research and Applications (IJERA), 2 (6). pp. 878-883.

Ng, Ban Kiong and Akasah, Zainal Abidin (2012) An overview of precast concrete system for building maintenance: Malaysian perspective. NTERNATIONAL JOURNAL OF ENGINEERING SCIENCE & ADVANCED TECHNOLOGY, 2 (6). pp. 2250-3676.

Ng, Kim-Soon (2012) Quality management system and practices. IntechOpen.

Nor Salim, Nor Adrian (2012) Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba. Masters thesis, Univeristi Kebangsaan Malaysia.

Nor Salim, Nor Adrian (2012) Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba. Masters thesis, Universiti Kebangsaan Malaysia.

Omar, Gadaffi (2012) Voltage tracking of a DC-DC buck-boost converter using gaussian fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Sylvia Ai Ling (2012) SNR estimation using extended kalman filter technique for orthogonal frequency division multiplexing (OFDM) system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Hanifi and Haron, Zaiton and Mohd Yusof, Mohd Badruddin and Hainin, Mohd Rosli and Yahya, Khairulzan and Yaacob, Haryati and Azman, Shamila (2012) Evaluation of external noise produced by transverse rumble strips on rural roadways. Advanced Materials Research, 446-. pp. 2617-2623. ISSN 1022-6680

Pairan, Mohamad Rasidi (2012) A simulation of film cooling in the leading edge region of a turbine blade (trench effect on film effectiveness from cylinder in crossflow). Masters thesis, Universiti Tun Hussein Malaysia.

Pakir Mohamed, Mohamed Ismail (2012) Supply chain collaboration among Malaysian SME manufacturers. Masters thesis, Universiti Tun Hussein Malaysia.

Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Experimental study of helical milling on CFRP (carbon fibre reinforced polymer) for the hole making process. Advanced Materials Research, 576. pp. 68-71. ISSN 1022-6680

Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Hole making process of carbon fiber reinforced polymer (CFRP) using end mill cutting tool. Advanced Materials Research, 576. pp. 64-67. ISSN 1022-6680

Rahim, E.A. and Mohid, Z. and Rahman, A.H.A. and Bahman, M.F. (2012) The effect of internal through coolant on grinding performance on AISI1020 mildsteel. Advanced Materials Research, 576. pp. 87-90. ISSN 1022-6680

Rahiman, Mohd Hafiz Fazalul and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Mohd Muji, Siti Zarina and Mohamad, Elmy Johana (2012) Ultrasonic tomography - image reconstruction algorithms. International Journal of Innovative Computing, Information and Control, 8 (1 (B)). pp. 527-538. ISSN 1349-4198

Rahiman, Mohd Hafiz Fazalul and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Mohd Muji, Siti Zarina and Mohamad, Elmy Johana (2012) Ultrasonic tomography – image reconstruction algorithms. International Journal of Innovative Computing, Information and Control, 8 (1). pp. 527-538. ISSN 1349-4198

Ramlan, Aslinda (2012) Study on characteristics behavior of developing nozzle for aerosol spray. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramlee, Nor Asrina (2012) Detection of voltage disturbances in power quality using wavelet transforms. Masters thesis, Universiti Tun Hussein Malaysia.

Razman, Ruzaimah (2012) Thermal performance of residential house using interlocking compressed earth brick (ICEB) as an alternative wall material. Masters thesis, Universiti Tun Hussein Malaysia.

Rehman Gillani, Syed Muhammad Zubair (2012) Predicting noise-induced hearing loss (NIHL) in TNB workers using GDAM algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rodzalan, Shazaitul Azreen and Mohamed Saat, Maisarah (2012) The effects of industrial training on students’ generic skills development. Procedia - Social and Behavioral Sciences, 56. pp. 357-368. ISSN 1877-0428

Rufus, Shirley (2012) Power quality events analysis using wavelet transform. Masters thesis, Universiti Tun Hussein Malaysia.

Sabudin, Elia Nadira (2012) Development of position tracking of BLDC motor using adaptive fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saesar, Luhur Budi (2012) Development of semi-autonomous mobile robot hardware-in-the-loop (HIL) simulation for indoor mapping. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saher, Rohaizan (2012) Three phase boost rectifier design. Masters thesis, Universiti Tun Hussein Malaysia.

Sanmargaraja, Shalini (2012) Penyediaan fasiliti di rumah warga tua: kajian kes di Bandaraya Ipoh dan Johor Bahru. Masters thesis, Universiti Tun Hussein Malaysia.

Sapian, Nik Fazli (2012) Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation. Masters thesis, Universiti Tun Hussein Malaysia.

Shah Ayop, Sallehuddin and J. Cairns, John (2012) Critical study of corrosion damaged concrete structures. International Journal of Integrated Engineering, 5 (2). pp. 43-50. ISSN 2229-838X

Soo, Poey Lam (2012) Analysis of the flow characteristic inside a heated and unheated horizontal rifled tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subhi, Zaid Ali (2012) The effects of vortex gate design on mechanical strength of thin section casting of LM 25 (Al---7Si-0.3Mg) aluminum casting alloy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sudin, Sukhairi (2012) Wireless knee joint angle measurement system using gyroscope. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kheng Wee (2012) A conceptual design of an alternative method for cutting off standby power consumption for office equipment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Shen Kian (2012) Motivation and citizenship performance of generation X & Y in electric and electronic industry. Masters thesis, Universiti Tun Hussein Malaysia.

Tukeman, Zalifah (2012) Fuzzy logic – genetic algorithm based maximum power point tracking in photovoltaic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Vechian, Mongkhun Qetkeaw (2012) Wireless control quadcopter with stereo camera and self-balancing system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wakiman, Nur Farhanah (2012) Modeling of photovoltaic (PV) module temperature based on ambient factor in Malaysia using ANFIS. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Kadir, Wan Muhamad Hanif and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Internet controlled robotic arm. International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), 41. pp. 1065-1071.

Wan Kadir, Wan Muhamad Hanif and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Internet controlled robotic arm. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), Sep 4, 2012 - Sep 6, 2012, Sarawak..

Wong, Sie Woo (2012) Development of OFDM in WDM- Radio over fiber access network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaan, Yee Choy and Kim, Gaik Tay and Chee, Tiong Ong (2012) NLS equation with variable coefficient in a stenosed elastic tube filled with an averaged inviscid fluid. World Applied Sciences Journal, 16 (4). pp. 622-631. ISSN 1818-4952

Yusoff, Mohd Ashiq Kamaril and Samin, Reza Ezuan and Ibrahim, Babul Salam Kader (2012) Wireless mobile robotic arm. In: International Symposium on Robotics and Intelligent Sensors 2012 (IRIS 2012), Sep 4, 2012 - Sep 6, 2012, Sarawak..

Zainuddin, Zarita and Pauline, Ong (2012) An effective and novel wavelet neural network approach in classifying type 2 diabetics. Neural Network World, 22 (5). pp. 407-428. ISSN 1210-0552

Zaman, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Kawashima, Nobuyuki and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Luonga, Lee and Ma, Jun (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4. pp. 4578-4586. ISSN 2040-3364

Zaman, Izzuddin and Kuan, Hsu-Chiang and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Pitt, Terry and Zhang, Liqun and Gouda, Sherif and Luong, Lee and Ma, Jun (2012) A facile approach to chemically modiﬁed graphene and its polymer nanocomposites. Advanced Functional Materials. pp. 1-9. ISSN 1616-301X

Zaman, Izzuddin and Kuan, Hsu-Chiang and Meng, Qingshi and Michelmore, Andrew and Nobuyuki, Kawashima and Pitt, Terry and Zhang, Liqun and Gouda, Sherif and Lee, Luong and Jun, Ma (2012) A facile approach to chemically modified graphene and its polymer nanocomposites. Advanced Functional Materials, 22 (13). pp. 1-9. ISSN 1616-301X

Zaman - izzuddin@uthm.edu.my, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Nobuyuki, Kawashima and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Lee, Luong and Jun, Ma (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4 (NIL). pp. 4578-4586. ISSN 2040-3364

Zamri Tan, Nurul Zakiah (2012) Step-NC code generator for drilling operation using GEN-M. Masters thesis, Universiti Tun Hussein Malaysia.

Zeni, Saltihie (2012) Improving on the network lifetime of clustered-based wireless sensor network using modified leach algorithm. Masters thesis, Universiti Tun Hussein Malaysia.

This list was generated on Sat Nov 23 14:28:21 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0