Items where Year is 2013

A

A. Othman, Emad (2013) Improvement of routing protocol in wireless sensor network for energy consumption to maximize network lifetime. Masters thesis, Universiti Tun Hussein Malaysia.

A. Othman, Ibtesam (2013) Uplink channel power control improvement in DS-CDMA system using channel predictions. Masters thesis, Universiti Tun Hussein Malaysia.

A.Manaf, Normala (2013) Keserasian personaliti pelajar dengan kerjaya agen pengembangan. Masters thesis, Universiti Tun Hussein Malaysia.

Ab Latif, Mohd Noor Hisyam (2013) Production management and improvement initiatives: case studies of two Malaysian manufacturing companies. Masters thesis, Universiti Tun Hussein Malaysia.

Ab Razak, Siti Khadijah (2013) Kesediaan bakal guru dpli terhadap mata pelajaran reka cipta untuk mengajar di sekolah menengah: kajian di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Malek, Siti Nur Hidayah (2013) Design and development of wireless stethoscope with data logging functions. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Aziz, Aizat (2013) PV boost converter conditioning using neural network. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Halim, Hasmizar (2013) Three phase inverter development using common mode voltage pulse width modulation (PWM) method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Rahimah (2013) Effect of physical and mechanical properties of PU biopolymer membranes upon use of different fabrication techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Malek Faizal (2013) A study on the concentration and dispersion of PM10 in UTHM by using simple modelling and meteorological factors. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Rashid, Wan Norhisyam (2013) Optimal load shedding for microgrids with limited DGS (Application in Perwaja Steel Sdn Bhd). Masters thesis, Universiti Tun Hussein Malaysia.

Abd Rasid, Nor Hafifah (2013) Halangan personaliti dalam e-pembelajaran di Jabatan Perdagangan Politeknik Premier: satu kajian kes kualitatif. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Rais Rabani (2013) Analysis of non uniform surface current distribution on thick and thin wire antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Rahman, Rais Rabani (2013) Analysis of non uniform surface current distribution on thick and thin wire antenna. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Awal, A.S.M. and Shehu, I.A. (2013) Evaluation of heat of hydration of concrete containing high volume palm oil fuel ash. Fuel, 105 (NIL). pp. 728-731. ISSN 0016-2361

Abdul Hamid, Faizul Ezmat (2013) Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance edm (HPEDM) on AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ANN-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, Muhamad Faizal (2013) Design optimization of ann-based pattern recognizer for multivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Kadir, Aeslina and Mohajerani, Abbas (2013) Physical and mechanical properties of fired clay bricks incorporated with cigarette butts: comparison between slow and fast heating rates. In: Applied Mechanics and Materials, 2013.

Abdul Malik, Norfazila (2013) Penerapan ciri-ciri guru berkesan dalam proses pengajaran dan pembelajaran semasa latihan mengajar dalam kalangan Pelajar Sarjana UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Rahim, Suraya (2013) Design and development of groove micromixer for laminar blood-reagent mixing. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Rahman, Mohammad Ashraf (2013) Model kejayaan utama amalan terbaik pengurusan penyenggaraan bangunan warisan di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Mohd Ridzuan (2013) Microstrip bandpass filter using triangular patch resonator for wimax applications. Masters thesis, Universiti Tun Hussein Malaysia.

Abdull Kadir, Junaini (2013) Development of a boost convertor for photovoltaic system MPPT using fuzzy logic control. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Abd Halid and Abu Bakar, Siti Khatijah and Abd Rahman, Ismail (2013) Simulation of office’s operative temperature using ECOTECT model. International Journal of Construction Technology and Management, 1 (1). pp. 33-37.

Abdullah, Abd Halid and Abu Bakar, Siti Khatijah and Abdul Rahman*, Ismail (2013) Indoor thermal performance of an office building using Conventional Brick Versus Interlocking Compressed Earth Brick (ICEB) wall. International Journal of Construction Technology and Management, 1 (1). pp. 22-27.

Abdullah, Farisal (2013) Technique of failure analysis for gate oxide defect of Bi-polar CMOS Diffuse (BCD) technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohamad Syah Rizal (2013) Neural network controller design for position control system improvement. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Rasyidi (2013) Development of DC-DC converter for DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Rasyidi (2013) Development of DC-DC converter for DC motor using neural network controller. Masters thesis, Universiti Tun Hussein Malaysia.

Abdurrahim, Mohamed Emhemed (2013) Analysis and evaluation of uncertainty for conducted and radiated emissions tests. Masters thesis, Universiti Tun Hussein Malaysia.

Abtholuddin, Fadhilah (2013) Hubungan antara efikasi kendiri dan kemahiran belajar dalam kalangan pelajar kejuruteraan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Mohd Yusof (2013) The development of a curriculum framework for the National Dual Training System (NDTS) in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Adekunle Micheal, Adeshina (2013) Fast parallel volume visualization on cuda technology. Doctoral thesis, Universiti Tun Hussein Malaysia.

Adnan, Nur Azhani (2013) Pengaruh kecerdasan emosi terhadap kesediaan pelajar Sarjana Pendidikan Teknik dan Vokasional bagi menceburi profesion perguruan. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad, Abdull Zubi (2013) Characterization of the equatorial F2-region plasma drift using doppler interferometry at Parit Raja. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ahmad, Haslina (2013) Kecerdasan emosi dalam kalangan guru sekolah menengah teknik Kementerian Pendidikan Malaysia berdasarkan Model Dulewicz dan Higg's. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Mohd Hafiez (2013) A study of energy efficiency building lighting system design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Norhidayah (2013) Linear quadratic gaussian (LQG) controller for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad Bakri, Hafizah (2013) Tahap kebimbangan pelajar wanita bidang kejuruteraan terhadap peluang kerjaya. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Taib, Jamilullail (2013) Pengoptimuman pra-olahan air sisa kilang kelapa sawit (pome) menggunakan kaedah elektro-penggumpalan. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmed, Mohamad Baharin and Ambak, Kamarudin and Ahmad Raqib, Ahmad Raqib and Sukor, Nur Sabahiah (2013) Helmet usage among adolescents in rural road from the extended theory of planned behaviour. Journal of Applied Sciences, 13 (1). pp. 161-166. ISSN 1812-5654

Al. Mabrouk Khalifa, Hamza Masaud (2013) Structural behaviour of precast concrete sandwich panel using recycled aggregate concrete under transverse load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alashqer, Aws Zuheer Yonis (2013) Design and implementation of MIMO-long term evolution-advanced to support larger bandwidth. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Albert Gisip, Imelda and Harun, Amran (2013) Antecedents and outcomes of brand management from the perspective of resource based view (RBV) theory. Mediterranean Journal of Social Sciences, 4 (10). pp. 432-438. ISSN 2039-9340

Alfan, Norman Hafizi (2013) Analysis of characteristic heat pipe as an efficient cooling heat transfer device. Masters thesis, Universiti Tun Hussein Malaysia.

Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Nur Illyana (2013) Simulation for position control of DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Ali Saad, Ahmad Mabrook (2013) Dual-band microstrip loop antenna for wireless application. Masters thesis, Universiti Tun Hussein Malaysia.

Alias, Nor Akmal (2013) Linear quadratic regulator (LQR) controller design for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.

Alir, Afifah (2013) Simulation of speed tracking for brushless DC motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Alomary, Mayada Faris Ghanim (2013) Implementation of multi carrier-code division multiple access-frequency division multiple access with beyond 4G specifications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Aman, Fazlina (2013) Beberapa masalah aliran lapisan sempadan olakan dengan kesan gelinciran dan tanpa gelinciran pada permukaan. Doctoral thesis, Univeristi Kebangsaan Malaysia.

Amir Razlan Shapawi, Mohd Ezhar (2013) Penggunaan model servqual bagi mengukur perkhidmatan pendidikan tinggi di UTHM. Doctoral thesis, Universiti Tun Hussein Malaysia.

Anwar, Nurul Farahanaa (2013) Hubungan gaya pembelajaran dengan pencapaian akademik pelajar aliran vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Araby, Sherif and Zaman, Izzuddin and Meng, Qingshi and Kawashima, Nobuyuki and Michelmore, Andrew and Kuan, Hsu-Chiang and Majewski, Peter and Ma, Jun and Zhang, Liqun (2013) Melt compounding with graphene to develop functional, high-performance elastomers. Nanotechnology, 24 (165601). pp. 1-14. ISSN 0957-4484

Ardi, Mohd Aidil (2013) Power factor improvement in power system with the integration of renewable energy. Masters thesis, Universiti Tun Hussein Malaysia.

Arhami, Arhami (2013) Design and analysis of an unmanned small-scale air-land-water vehicle. Doctoral thesis, Universiti Tun Hussein Malaysia.

Arifin, Afifah (2013) Kesediaan masyarakat dalam pembangunan program homestay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arifin, Nor Amanina Izyan (2013) Pelaksanaan outcomes based education (OBE) dalam kalangan pensyarah di Fakulti Pendidikan Teknikal dan Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asmara, Y. P. and Juliawati, A. and Sulaiman, A. H. and Jamiluddin, Jamiluddin (2013) Mechanistic model of stress corrosion cracking (scc) of carbon steel in acidic solution with the presence of H2s. In: 2nd International Conference on Mechanical Engineering Research (ICMER 2013), 1st to 3rd July 2013, Kuantan, Pahang, Malaysia.

Assin, Mizan Kamalina (2013) Amalan penggunaan modul pengajaran berasaskan modul multimedia interaktif (MMI) dalam Pendidikan Teknik Dan Vokasional (PTV). Masters thesis, Universiti Tun Hussein Malaysia.

Atan, Farraniza (2013) Recycling kinetic energy from speed bump to generate electricity. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Awang Besar, Julkifli (2013) Quadrotor stability using PID. Masters thesis, Universiti Tun Hussein Malaysia.

Ayob, Mohammad Afif (2013) Dynamic leveling control of a wireless self-balancing ROV using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Aziz, Siti Mardziah (2013) Kesediaan guru sekolah menengah agama terhaap penggunaan Teknologi Maklumat dan Komunikasi (ICT) dalam pengajaran dan pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Abdul Rahman (2013) Simulation of dynamic load effect on power system frequency. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

B. Alhaj, Reyad Mohamed (2013) Analysis of electric field strength propagating underneath the 132 kV overhead power line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baharuddin, Mohamad Faizal Tajul and Taib, Samsudin and Hashim, Roslan and Zainal Abidin, Mohd Hazreek and Rahman, Nur Islami (2013) Assessment of seawater intrusion to the agricultural sustainability at the coastal area of Carey Island, Selangor, Malaysia. Arab J Geosci, 6. pp. 3909-3928.

Baharuddin, Nurul Akidah and Abd Rahman, Hamimah and Muchtar, Andanastuti and Sulong, Abu Bakar and Abdullah, Huda (2013) Development of lanthanum strontium cobalt ferrite composite cathodes for intermediate- to low-temperature solid oxide fuel cells. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering). ISSN 1673-565X

Ban, Huat Ng and Akasah, Zainal Abidin (2013) the development of a newly designed building performance survey framework for energy efficient building: a review. International Journal of Application or Innovation in Engineering & Management (IJAIEM), 2 (2). pp. 117-125. ISSN 2319 - 4847

Batcha, Mohd Faizal Mohideen and Mohd Nawi, Mohd Al-Hafiz and Sulaiman, Shaharin Anwar (2013) Numerical investigation of airflow in a swirling fluidized bed. Asian Journal of Scientific Research, 6 (2). pp. 157-166.

Bernard, Albinus (2013) Speed control of separately excited dc motor using artificial intelligent approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bollah, Javadius (2013) Overspeed correction scheme for dc motor using artifical intelligent approach. Masters thesis, Universiti Tun Hussein Malaysia.

Buyung, Mohd Reduan (2013) Kerangka rekabentuk Carta Selak Rangkaian Berintegrasi Teori Gagne Sembilan Peristiwa Pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Che Ani, Rashida (2013) Kecerdasan emosi dalam kalangan pelajar Diploma Pendidikan Lepasan Ijazah (DPLI) Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ilias, Izyan Mumtaz (2013) Pelaksanaan pengajaran pensyarah tiada kelayakan Ikhtisas Pendidikan. Masters thesis, Universiti Tun Hussein Malaysia.

Che Mamat, Rufaizal (2013) Engineering properties of Batu Pahat soft clay stabilized with lime, cement and bentonite for subgrade in road construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Ros, Ziana (2013) Optimal location of capacitor bank for power losses minimization. Masters thesis, Universiti Tun Hussein Malaysia.

Che Ros, Ziana (2013) Optimal location of capacitor bank for power losses minimization. Masters thesis, Universiti Tun Hussein Malaysia.

Che Sham, Izwan (2013) Buck converter switching design using microcontroller. Masters thesis, Universiti Tun Hussein Malaysia.

Chin, Ken Leong (2013) Programmable logic controller based variable speed drives for educational trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Eldagdag, Nabil Musbah (2013) Constant DC output boost converter for solar system sourace model. Masters thesis, Universiti Tun Hussein Malaysia.

F

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Omar, Roslan (2013) Understanding of mass transfer resistance for the adsorption of solute onto porous material from the modified mass transfer factor models. Chemical Engineering Journal, 228 (NIL). pp. 1023-1029. ISSN 1385-8947

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Yusof, Badronnisa (2013) Sediment traps from synthetic construction site stormwater run off by grassed filter strip. Journal of Hydrology, 502 (NIL). pp. 53-61. ISSN 0022-1694

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Yusof, Badronnisa (2013) Sediment traps from synthetic construction site stormwater runoff by grassed filter strip. Journal of Hydrology, 502. pp. 53-61. ISSN 0022-1694

G

Gaudin-Audrain, Christine and Irwin, Nigel and Mansur, Sity and Flatt, Peter R. and Thorens, Bernard and Baslé, Michel and Chappard, Daniel and Mabilleau, Guillaume (2013) Glucose-dependent insulinotropic polypeptide receptor deficiency leads to modifications of trabecular bone volume and quality in mice. BONE, 53 (NIL). pp. 221-230. ISSN 8756-3282

Gorep, Nor Aizila (2013) Induction motor controller using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Halim, Nurul Shafinaz (2013) Menentusahkan faktor tekanan kerja guru sekolah menengah Gred A Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Siti Hajar (2013) Kecenderungan graduan wanita kejuruteraan terhadap pemilihan profesion kerjaya bukan jurutera. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamid, Nurul Hidayati (2013) Cabaran pelajar antarabangsa di Kolej Kediaman UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Handaga, Bana (2013) A new classification technique based on hybrid fuzzy soft set theory and supervised fuzzy c-means. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hanzah, Nurulhuda Hanzah (2013) Intelligent power system protection data management. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Haris, Nur Ismalina (2013) Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd. Masters thesis, Universiti Tun Hussein Malaysia.

Haron, Hartini Sharninayati (2013) Linear quadratic regulator (LQR) controller design for DC Servo motor. Masters thesis, Universiti Tun Hussein Malaysia.

Harun, Farahiyah Murni (2013) Keyakinan diri pelajar Diploma Pendidikan Lepasan Ijazah di Universiti Tun Hussein Onn Malaysia terhadap ICT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Mohd Nasri (2013) Induction motor modelling using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.

Hashim, Mohd Yussni and Roslan, Mohd Nazrul and Mohd Zin, Shahruddin Mahzan and Ariffin, Saparudin (2013) Determination of alkali treatment conditions effects which influence the variability of kenaf fiber mean cross sectional area. World Academy of Science, Engineering and Technology, 7 (10). pp. 2097-2100.

Hashim, Mokhtar (2013) Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Nor Hasyiemah (2013) Menjana pemodulatan lebar denyut (PWM) penyongsang tiga fasa menggunakan pemproses isyarat digital (DSP). Masters thesis, Universiti Tun Hussein Malaysia.

Hashim, Nurul ‘Izzati (2013) Investigation of numerical technique to evaluate frequency response analysis (FRA) data measurement of auto power transformer. Masters thesis, Universiti Tun Hussein Malaysia.

Hassan, Hashimah Kho (2013) Kajian terhadap ketahanan hentaman ke atas konkrit berbusa yang diperkuat dengan serat kelapa sawit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan Suliman, Khaled Abubaker (2013) Simulation of AC-DC converter for DC motor application using fuzzy logic control. Masters thesis, Universiti Tun Hussein Malaysia.

Hehsan, Haffidzudin (2013) The effect of vortex well thickness on microstructure and mechanical properties of aluminium LM6. Masters thesis, Universiti Tun Hussein Malaysia.

Hermadi, Madi (2013) Developing new chemical–rheological models and chemical–durability indices of bitumen. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ho, Yoong Chow and Hasan, Sulaiman and Bareduan, Ahmad Salleh (2013) Basic concept of implementing Artificial Bee Colony (ABC) system in flow shop scheduling. Applied Mechanics and Materials, 315. pp. 385-388. ISSN 1660-9336

Hor, Peay San (2013) Infuence of speed and flow rate on road accidents: a case study along federal route 50 (FT 050). Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Iberahim, Suzilawati (2013) Design and development of pyrolysis system to produce wood vinegar. Masters thesis, Universiti Tun Hussein Malaysia.

Ibrahim, Mohammed Khaleel (2013) Seamless horizontal handover algorithm for homogeneous wireless mobile networks using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.

Ibrahim, Muhammad Iskandar (2013) Development of an AC-DC buck power factor correction. Masters thesis, Universiti Tun Hussein Malaysia.

Ibrahim, Noraini (2013) An enhanced UML consistency checker using logical approach. Doctoral thesis, Universiti Tun Hussein Malaysia.

Idris, Azrini (2013) Performance analysis for facial expression recognition under salt and pepper noise with median filter approach. Masters thesis, Universiti Tun Hussein Malaysia.

Inun, Haidie (2013) Path planning algorithm for a car like robot based on Coronoi Diagram Method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishak, Siti Hajjar (2013) Tinjauan terhadap amalan keselamatan dalam kalangan pelajar dan pensyarah di makmal kejuruteraan Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nurfakhirah (2013) Fuzzy logic controller design for inverted pendulum system. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail, Zul-Atfi (2013) DMOSYS: defect-monitoring system for building maintenance at polytechnic. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail @ Abd Wahab, Aruna (2013) The development of a new Malaysian Skills Qualification Framework (MSQF) in the context of National Dual Training System (NDTS). Doctoral thesis, Universiti Tun Hussein Malaysia.

Ismon, Maznan (2013) Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil. Masters thesis, Universiti Tun Hussein Malaysia.

J

Jaafar, Lizawati (2013) Automatic room temperature control. Masters thesis, Universiti Tun Hussein Malaysia.

Jaafar, Muhammad Nazri (2013) Kemahiran berfikir kritis dalam kalangan pelajar kejuruteraan di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Jakuil, Alester G (2013) Multi criteria decision making on load shedding scheme in an islanded system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Mohd Nor Aidi (2013) Off grid Pico Hydro Power Generator utilizing household water supply. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jasni, Nur Akmal Hakim (2013) Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Malaysia.

Johar, Siti Rohani (2013) Kesedaran teknologi hijau dalam kalangan warga Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Kamarudin, Mohd Khairul Shazril (2013) Two way power flow in advance distributions and micro grid. Masters thesis, Universiti Tun Hussein Malaysia.

Kamdi, Z. and Shipway, P. H. and Voisey, K. T. (2013) Micro-scale abrasion of WC-based coatings with different abrasive type. Applied Mechanics and Materials, 465 (466). pp. 65-69. ISSN 1660-9336

Kassim, Noordiana and Mohamad, Mahmod Abd Hakim and Janon, Mohd Najib and Mohd Hanifa, Rafizah and Yusof, Yusri (2013) Development of STEP-NC based machining system for machining process information flow. Applied Mechanics and Materials, 315. pp. 278-282. ISSN 1660-9336

Kassim, Noordiana and Yusof, Yusri and Mohamad, Mahmod Abd Hakim and Janon, Mohd Najib and Mohd Hanifa, Rafizah (2013) Development of STEP-NC based machining system for machining process information flow. Applied Mechanics and Materials, 315 (NIL). pp. 278-282. ISSN 1660-9336

Katim, Nurul Izzatul Akma (2013) Asset management decision making of power transformer with insulation ageing knowledge. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khaire Elarosi, Muwfik Faidi (2013) On the development computer, code for determinig the root of equation for transient flight analysis. Masters thesis, Universiti Tun Hussein Malaysia.

Khaleel Ibraheem, Amjed (2013) An application of artificial neural network classifier for medical diagnosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Khairul Nadiah (2013) Comparative study of micromixers for laminar blood mixing. Masters thesis, Universiti Tun Hussein Malaysia.

Khalid, Siti Nor Azila (2013) Mechanical strength of as-compacted aluminium alloy waste chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kidoguchi, Yoshiyuki and Nada, Yuzuru and Yano, Takayuki and Nakagiri, Misato (2013) Analysis of a high pressure diesel spray at high pressure and temperature environment conditions. Transactions of The Japan Society of Mechanical Engineers Series B, 79 (799). pp. 172-178. ISSN 0387-5016

Kimbin, Daniel (2013) A new AHP – based reactive power valuation method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kimpol, Norhanisa (2013) Study of solution towards ground leakage current via inverter switching in different topologies for grid connected PV system. Masters thesis, Universiti Tun Hussein Malaysia.

kamarudin, Khairu (2013) Parameter optimization for photo polymerization of mask projection micro stereolithography. Masters thesis, Universiti Tun Hussein Malaysia.

L

Lee, Mao Rui (2013) Treatment of landfill leachate in coagulationflocculation method by using micro zeolite and micro sand. Masters thesis, Universiti Tun Hussein Malaysia.

M

M., Mohd Amran and Masrol, Shaiful Rizal and Ismon, Maznan and Roslan, Mohd Nazrul and Yahya, Musli Nizam and Ghazali, Mohd Imran and Munawar, Shahruddin (2013) Evaluation of sound comfort in examination hall using acoustical environmental analyses. Applied Mechanics and Materials, 315 (NIL). pp. 825-829. ISSN 1662-7482

M. Yusup, Eliza and Mahzan, Shahruddin and Mohammad, Baharuddin and Wan Daud, Wan Rosli (2013) A novel approach for bone scaffold from oil palm empty fruit bunch cellulose phosphate / glass material. Advanced Materials Research, 748. pp. 180-183. ISSN 1022-6680

Ma, Jun and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Izzuddin, Zaman and Bengtsson, Carl and Kuan, Hsu-Chiang (2013) Covalently bonded interfaces for polymer/graphene composites. Journal of Materials Chemistry A: materials for energy and sustainability (Journal of Materials Chemistry A), 1. pp. 4255-4264. ISSN 2050-7488

Mad Zaki @ Abdullah, Shahrul Radzi (2013) Analysis of fiber nonlinearity for various power levels in DWDM system. Masters thesis, Universiti Tun Hussein Malaysia.

Madlan, Mohd Amran (2013) The application on the usage of natural fibers as noise absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Mahadan, Mohd Ezwan (2013) Simulation of a single-phase active power filter based ANN controller. Masters thesis, Universiti Tun Hussein Malaysia.

Mahadi, Nur Shahreena (2013) Study on precast lightweight foamed concrete sandwich panel (PLFP) connection under flexural load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahmood Almuhaya, Mukarram Abduljalil (2013) FPGA based maximum power point tracking controller for photovoltaic system. Masters thesis, Universiti Tun Hussein Malaysia.

Maskan, Norsyuhadah (2013) Pelaksanaan Pentaksiran Berasaskan Sekolah (PBS) bagi mata pelajaran sains di Sekolah Kebangsaan Daerah Pontian, Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Masrol, Shaiful Rizal (2013) Characteristics of paper made from durian rinds. Masters thesis, Universiti Tun Hussein Malaysia.

Masrol, Shaiful Rizal and Madlan, M.A. and Md Salleh, Salihatun and Ismon, Maznan and Roslan, Mohd Nazrul (2013) Vibration analysis of unbalanced and misaligned rotor system using laser vibrometer. Applied Mechanics and Materials, 315 (NIL). pp. 681-685. ISSN 1662-7482

Masrom, M. A .N. and Skitmore, Martin and Bridge, Adrian (2013) Determinants of contractor satisfaction. Construction Management and Economics, 31 (7). pp. 761-779. ISSN 1466-433X

Mat Ali, Mazita (2013) Development of self balancing platform on mobile robot using PID controller. Masters thesis, Universiti Tun Hussein Malaysia.

Mat Yusoh, Mohd Abdul Talib (2013) Development of a single phase active Power filter for rectifier load. Masters thesis, Universiti Tun Hussein Malaysia.

Mazni, Nuur Maisya (2013) G-slot microstrip patch antenna for RFID application. Masters thesis, Universiti Tun Hussein Malaysia.

Md Esa, Muhamad Matta (2013) Mitigating blind spot collision utilizing ultrasonic gap perimeter sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Jamal, Muhammad Hazwan (2013) Modelling and control of the fish feeder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salleh, Salihatun and Rahim, E.A. and Roslan, Mohd Nazrul and Ismon, Maznan and Madlan, M.A. and Masrol, Shaiful Rizal and Jelani, Abdul Razak and Ahmad, Mohd Rizal (2013) Hand-arm vibration of unskilled oil palm motorised cutter operator. Applied Mechanics and Materials, 315 (NIL). pp. 695-699. ISSN 1662-7482

Md Sarif, Nur Azhani (2013) Personal navigator for visual impaired person utilizing galvanic vestibular stimulator. Masters thesis, Universiti Tun Hussein Malaysia.

Md Tahir, Zuraidi (2013) Development of an AC-DC boost power factor correction. Masters thesis, Universiti Tun Hussein Malaysia.

Md Zain, Rasimah (2013) Penilaian integriti struktur robi test bed (road bridge interface test bed) di atas tanah lembut. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Memon, Aftab Hameed (2013) Structural modelling of cost overrun factors in construction industry. Doctoral thesis, Universiti Tun Hussein Malaysia.

Mihaj, Kamarul Faiz (2013) Conceptual design of harvesting energy system for road application. Masters thesis, Universiti Tun Hussein Malaysia.

Miskam, Nurasyikin (2013) Transformasi Pekan Parit Raja: kajian terhadap kesejahteraan hidup masyarakat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Mimi Mohaffyza (2013) Learning styles and academic achievement among building construction students. Doctoral thesis, Universiti Teknologi Malaysia.

Mohamad, Nur Suriya (2013) A study of energy efficiency opportunities in Putrajaya Maritime Centre towards green building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Salamiyah (2013) Development of a power factor correction boost converter in single phase rectifier using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad, Zarina (2013) A model for federated data grid systems based on network core area. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ali, Ummu Umairah (2013) Transformer life prediction using data from units removed from service. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed, Ehab Ali (2013) Compact monopole antenna for wireless USB dongle applications. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed, Hazizul (2013) Smart torque control for overloaded motor using artificial intelligence approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Masnani and Jusoh, Noordina Syazana and Ahmad, Ida Laila (2013) Anger mood detection based on face recognition and heartbeat. International Journal of Engineering Research & Technology (IJERT), 2 (2). pp. 1-6. ISSN 2278-0181

Mohamed, Masnani and Lee, Chee Chuan and Ahmad, Ida Laila (2013) Feature extraction of speech signal and heartbeat detection in angry emotion identification. International Journal of Computer Science and Electronics Engineering (IJCSEE), 1 (1). pp. 101-106. ISSN 2320 –401X

Mohamed, Saleh Omar (2013) Performance enhancement of salisbury screen microwave absorber using dual-layer frequency selective surfaces (FSS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Intan Shafinaz (2013) Receiver bandwidth enhancement design for high speed optical system. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Ariffin, Maslina (2013) Enhancing fuel burning efficiency by regulate spark plug voltage supply. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Fahmi, Mohd Fahmi and Manshoor, Bukhari and Khalid, Amir and Mohd Al-Hafiz, Mohd Al-Hafiz (2013) Numerical study of circle fractal grid perforated plate as a turbulent generator in combustion chamber. In: The 2nd International Conference on Recent Advances in Automotive Engineering & Mobility Research, Kuala Lumpur.

Mohd Jamil, Johanis (2013) Control and monitoring of solar photovoltaic panel using PLC. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Jomuin, Noryati (2013) Etika dan moral profesional dalam kalangan Pelajar Sarjana yang telah menjalani program latihan mengajar. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Kasim, Ct Valkyis (2013) Analysis of existing effectiveness and method to enhance the lightning, shielding and earthing protection schemes applied on the Parit Raja’s Telecommunication Tower System. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Khairy, Afiz Azry (2013) Multivariate quality control using an integrated artificial neural network scheme: a case study in plastic injection molding industry. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Khozam, Nur Fazliyah (2013) Penghasilan perisian multimedia interakteraktif dan kesesuaiannya sebagai alat dan Bahan Bantu Mengajar (ABBM) bagi Pelajar Pendidikan Khas Vokasional Kursus Pemasangan Motosikal. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Tukiran, Zarina and Nor Ayob, Nor Muzakkir and Mohamad, Elmy Johana and Puspanathan, Jaysuman (2013) Optical tomography: Image improvement using mixed projection of parallel and fan beam modes. Measurement, 46. pp. 1970-1978. ISSN 0263-2241

Mohd Nawi, Mohd Al-Hafiz (2013) Aerodynamics of a swirling fluidized bed. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nor, Mohd Khir and Vignjevic, Rade and Campbell, James (2013) Modelling of shockwave propagation in orthotropic materials. Applied Mechanics and Materials, 315. pp. 557-561. ISSN 1660-9336

Mohd Norihan, Ibrahim and Adi Siswanto, Waluyo and Zaidi, A. M. A. (2013) Computational issues in the simulation of high speed ballistic impact: a review. Applied Mechanics and Materials, 315 (NIL). pp. 762-767. ISSN 1660-9336

Mohd Radzi, Mohd Zulhisham (2013) Optimal allocation and sizing of distributed generation using particle swarm optimization in distribution system. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Radzi, Mohd Zulhisham (2013) Optimization of stand-alone photovoltaic system by implementing fuzzy logic MPPT controller. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Razali, Siti Nooraiin (2013) Instrumented physical model studies of the peat soil-engineering structure interaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ridzuan, Noridah (2013) Design and simulation of low power consumption polymeric based MMI thermo-optic switch. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Rosli, Farhana (2013) Pembudayaan keusahawanan ke arah mempengaruhi kecenderungan menceburi bidang keusahawanan dalam kalangan bakal graduan di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sabri, Nur Hafizah (2013) Perlaksanaan prinsip lean dalam pendidikan. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Sadri, Mohd Pawzi (2013) Path planning algorithm for a car like robot based on MILP method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Mohd Kamarul Afandi (2013) Pelaksanaan program kerjasama institusi industri di Politeknik Merlimau Melaka. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Rohayu (2013) A robust estimation method of location and scale with application in monitoring process variability. Doctoral thesis, Universiti Teknologi Malaysia.

Mohd Turan, Faiz (2013) A three-stage methodology for design evaluation in product development. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Noorhafiezah (2013) Kecerdasan matematik-logik dalam kalangan pelajar sarjana Pendidikan Teknik dan Vokasional UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

Mokhtar, Mohd Faiz (2013) Features extraction of geometry defect monitoring in cylindrical piping. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muda@Othman, Asmawi (2013) Development of a power factor correction buck converter in single phase rectifier using fuzzy logic. Masters thesis, Universiti Tun Hussein Malaysia.

Muhamad Damanhuri, Amir Abdullah (2013) Monitoring of air ducting using mechanical robot for indoor air quality (IAQ) improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muridan, Natashadora (2013) Penguasaan kemahiran komunikasi interpersonal dalam kalangan pelajar tahun satu Fakulti Pendidikan Teknikal dan Vokasional di UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Mustaffa, Norrizal (2013) Effects of biodiesel fuel temperature on performance and emissions of a compression ignition (CI) engine. Masters thesis, Universiti Tun Hussein Malaysia.

Mustapha, Mohd Faizal (2013) Elimination THD using 9- level DC to AC cascade H-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Malaysia.

Mustapha, Mohd Faizal (2013) Elimination THD using 9-level DC to AC cascade h-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapha, Nik Mohd. Zaitul Akmal (2013) Optimal load shedding for microgrids with unlimited DGs. Masters thesis, Universiti Tun Hussein Malaysia.

N

Nasir, N.F. and W. Daud, W.R. and Kamarudin, S.K. and Yaakob, Z. (2013) Process system engineering in biodiesel production: a review. Renewable and Sustainable Energy Reviews, 22. pp. 631-639. ISSN 1364-0321

Ng, Ban Huat (2013) Development of energy-efficient building environmental quality evaluation framework. Masters thesis, Universiti Tun Hussein Malaysia.

Ng, Ban Huat and Akasah, Zainal Abidin (2013) Post occupancy evaluation of energy-efficient buildings in Tropical climates – Malaysia. International Journal of Architectural Research, 7 (2). pp. 8-12. ISSN 2631-6862

Ng, Chee Seng (2013) A study of the effectiveness of local exhaust ventilation (LEV) in training facilities building using computational fluid dynamics (CFD) approach. Masters thesis, Universiti Tun Hussein Malaysia.

Nik Mustaffa, Nik Khatijah (2013) Dual mode microstrip open loop resonator and filter for wireless lan applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Supian, Nik Mohd Azri (2013) Sensitivity study on influencing parameters of transformer thermal model with directed oil flow. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nikmat Leong, Siti Asma’ and Mohd Samin, Pakharuddin and Idris, Ani and Azizul, Muhamad Asri and Misran, Effaliza (2013) Effect of PAO-based γ-Fe2O3 and surfactant concentration on viscosity characteristic. Applied Mechanics and Materials, 284. pp. 265-270. ISSN 1660-9336

Nongkang, Jumriani (2013) A study on credit evaluation of power consumer based on the topsis and AHP method. Masters thesis, Universiti Tun Hussein Malaysia.

Nordin, Norhuzayanti (2013) Kesediaan bakal guru DPLI terhadap kursus elektromekanikal untuk mengajar di sekolah menengah: kajian di UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

O

Omar, Nurhanum (2013) Path planning algorithm for a car-like robot based on cell decomposition method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Hui Niang (2013) Fractal koch antenna for indoor tv and fm reception. Masters thesis, Universiti Tun Hussein Malaysia.

Oon, Syahira Raihan (2013) Lifetime prediction and estimation of power transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Inawati and Nor Anuar, Aznah and Ujang, Zaini and Rosman, Noor Hasyimah and Harun, Hasnida and Chelliapan, Shreeshivadasan (2013) Livestock wastewater treatment using aerobic granular sludge. Bioresource Technology, 133. pp. 630-634. ISSN 0960-8524

Othman, Mazihah (2013) Analisis keperluan pelajar, guru dan kandungan untuk pembangunan e-bahan instruksional mata pelajaran pengajian kejuruteraan elektrik dan elektronik tingkatan empat: satu kajian kes kualitatif. Masters thesis, Universiti Tun Hussein Malaysia.

Othman, Mohd Fahmi and Manshoor, Bukhari and Khalid, Amir (2013) Circle grid fractal plate as a turbulent generator for premixed flame: an overview. In: 2nd InternationalConferenceonMechanicalEngineeringResearch(ICMER2013), 1-3 July 2013, Kuantan, Pahang.

P

Pandak Jabo, Nurul Izzati (2013) Safety distance awareness system for Malaysian Driver. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Parni, Puspawati (2013) Kecenderungan pelajar Institut Latihan Jabatan Tenaga Manusia dalam menceburi bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pawi, Soeb (2013) Model pengurusan cukai harta Pihak Berkuasa Tempatan Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

R

Radhi Kamaruzaman, Ahmad Khairul (2013) Optimal combined load forecast based on multi-criteria decision making methods. Masters thesis, Universiti Tun Hussein Malaysia.

Rahiman, M.H.F. and Rahim, R.A. and Rahim, H.A. and Ayob, N.M.N. and Mohamad, E.J. and Zakaria, Z. (2013) Modelling ultrasonic sensor for gas bubble profiles characterization of chemical column. Sensors and Actuators B: Chemical, 184. pp. 100-105. ISSN 0925-4005

Rahiman, Mohd Hafiz Fazalul and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Nor Ayob, Nor Muzakkir and Mohamad, Elmy Johana and Zakaria, Zulkarnay (2013) Modelling ultrasonic sensor for gas bubble profiles characterization of chemical column. Sensors and Actuators B: Chemical, 184 (NIL). pp. 100-105. ISSN 0925-4006

Rakiman, Umol Syamsyul (2013) Production line: effect of different inspection station allocation under accepts reject inspection policy. Masters thesis, Universiti Tun Hussein Malaysia.

Ramli, A. and Akasah, Z. A. and Masirin, M. I. M. (2013) Factors contributing building safety and health performance of low cost housing in Malaysia. Journal of Safety Engineering, 2 (1). pp. 1-5.

Ramli, Azuin and Abidin Akasah, Zainal Abidin and Mohd Masirin, Mohd Idrus (2013) Assessing safety and health factors influencing performance of Malaysian low-cost housing. Civil and Environmental Research, 3 (3). pp. 7-19.

Ramli, K. N. and Abd-Alhameed, R. A. and See, C. H. and Excell, P. S. and Noras, J. M. (2013) Hybrid computational scheme for antenna human body interaction. Progress In Electromagnetics Research, 133. pp. 117-136.

Rasdi, Normalina (2013) A novel technique for non-interuppted replacement ups system with the integration of portable transfer switch (PTS). Masters thesis, Universiti Tun Hussein Malaysia.

Rase, Rasima (2013) Kesediaan pensyarah politeknik menggunakan pendekatan m-pembelajaran dalam pengajaran dan pembelajaran di Negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Mohd Azahari and Mori, Masayuki and Suzuki, Masataro and Masuda, Wataru (2013) Measurement of thermophoretic parameters for binary gas mixtures. Journal of Aerosol Science, 63. pp. 60-68.

Rejab, Muhammad Nazri (2013) Finite element analysis of mechanical properties for 2D woven kenaf composite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rodzalan, Shazaitul Azreen and Mohamed Saat, Maisarah (2013) The effects of human and organizational factors on students’ communication skill development. Interdisciplinary Journal of Contemporary Research In Business, 4 (11). pp. 572-580. ISSN 2073-7122

Roslan, Rohaizu and Wan Daud, Wan Rosli and Zainuddin, Zarita and Pauline, Ong (2013) Optimization of cellulose phosphate synthesis from oil palmlignocellulosics using wavelet neural networks. Industrial Crops and Products, 50 (NIL). pp. 611-617. ISSN 0926-6690

Rosman, Noor Hasyimah and Nor Anuar, Aznah and Othman, Inawati and Harun, Hasnida and Sulong @ Abdul Razak, Muhammad Zuhdi and Elias, Siti Hanna and Mat Hassan, Mohd Arif Hakimi and Chelliapan, Shreesivadass and Ujang, Zaini (2013) Cultivation of aerobic granular sludge for rubber wastewater treatment. Bioresource Technology, 129. pp. 620-623. ISSN 0960-8524

S

S., Muhammad Farid and Z., Samad and A.B., Husaini and M.R., Arshad and S., Mahzan (2013) Preliminary analysis on generated jet pressure from ionic polymer composite actuated radial contraction using balloon manometry technique. Indian Journal of Geo-Marine Sciences, 42 (8). pp. 1023-1027. ISSN 0379-5136

Saad, Sahrudin (2013) Development of an ac-dc buck-boost power factor correction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saadi, Younes (2013) Contour matching using ant colony optimization and curve evolution. Masters thesis, Universiti Tun Hussein Malaysia.

Saadon, Eddy Irwan Shah (2013) Evaluating the IEEE 802.15.4a UWB physical layer for WSN applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sagara, Shinichi and Ambar, Radzi and Takemura, Fumiaki (2013) A stereo vision system for underwater vehicle-manipulator systems – proposal of a novel concept using pan-tilt-slide cameras. Journal of Robotics and Mechatronics, 25 (5). pp. 785-794.

Sahidi, Sujanuriah (2013) Friction stir welding of dissimilar metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Noorsyarzielah (2013) Kesedaran terhadap amalan pemakanan seimbang dalam kalangan pelajar Politeknik Merlimau, Melaka: satu tinjauan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Nurul Shahira (2013) Amalan pembacaan berkesan dalam kalangan pelajar Sarjana Pendidikan Teknik dan Vokasional di Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Mariam (2013) Comparison of rhombic type micromixer to improve mixing efficiency in biomems application. Masters thesis, Universiti Tun Hussein Malaysia.

Salleh, Noor Amani (2013) A new routing metric for DYMO protocol on mobile AD HOC network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sapawe, N. and Jalil, A.A. and Triwahyono, S. and Sah, R.N.R.A. and Jusoh, N.W.C. and Hairom, Nur Hanis Hayati and Efendi, J. (2013) Electrochemical strategy for grown ZnO nanoparticles deposited onto HY zeolite with enhanced photodecolorization of methylene blue: Effect of the formation of Si O Zn bonds. Applied Catalysis A: General, 456. pp. 144-158. ISSN 0926-860X

Sarani, Noor Amira and Abd Kadir, Aeslina (2013) Thermal conductivity of fired clay bricks incorporated with cigarette butts. In: Advanced Materials Research, 2013.

Sarnon, Mohd Zaki (2013) Two ways power flow with renewable energy integration. Masters thesis, Universiti Tun Hussein Malaysia.

Sa’don, Siti Nor Hafizah (2013) Planar inverted-f antenna (PIFA): a study of specific absorption rate (SAR) by using dual frequencies in mobile communications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Selamat, Mohd Khairul Zawawi (2013) Enhanced under frequency load shedding (UFLS) schemes performance in Sabah Grid System. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Senan, Norhalina (2013) Feature selection for traditional Malay musical instrument sound classification using rough set. Masters thesis, Universiti Tun Hussein Malaysia.

Shafie, Fazira (2013) FM Help Desk: user complaint system as an FM approach for facilities management services in Universiti Tun Hussein Onn Malaysia (UTHM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahidan, Shahiron and Pulin, Rhys and Muhamad Bunnori, Norazura and M. Holford, Karen (2013) Damage classification in reinforced concrete beam by acoustic emission signal analysis. Construction and Building Materials, 45. pp. 78-86. ISSN 0950-0618

Shamala, Palaniappan and Ahmad, Rabiah and Yusoff, Mariana (2013) A conceptual framework of info structure for information security risk assessment (ISRA). Journal Of Information Security And Applications, 18. pp. 45-52.

Shamsuri, Mohd Mahathir Suhaimi (2013) Strategi pembangunan program homestay Kampung Kangkar Merlimau. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shehu Musawa, Maikudi (2013) Perception of Nigerian SMEs on electronic data interchange adoption. Masters thesis, Universiti Tun Hussein Malaysia.

Sherwani, Fahad (2013) Robotic path planning using rapidly-exploring random trees. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Siagian, Caroline Dame (2013) Risk assessment in power system using multi-criteria decision making (MCDM) methods. Masters thesis, Universiti Tun Hussein Malaysia.

Sidek, Kamsidi @ Abd Malek (2013) Production improvement in ACM manufacturing company using lean manufacturing approach. Masters thesis, Universiti Tun Hussein Malaysia.

Sidek, Sabariah (2013) Hubungan kecerdasan emosi dengan pencapaian akademik dalam kalangan pelajar-pelajar Kolej Vokasional Kementerian Pelajaran Malaysia (KVKPM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sies, Mohamad Farid (2013) Development of the premixing injector in burner system. Masters thesis, Universiti Tun Hussein Malaysia.

Soluman Ahtiwish, Aimen Khalifa (2013) Optimization of DC - DC boost converter using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Songkin, Myjessie (2013) Voltage instability analysis on the Sabah grid system: a case study my. Masters thesis, Universiti Tun Hussein Malaysia.

Soon, Adrian Bee Toing (2013) Intelligent road recognition system for automous vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniyan, S Kanna (2013) Mechanical behaviour and energy absorption performances of composite foam-filled circular tubes under axial loadings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniyan, S Kanna and Mahzan, Shahruddin and Ghazali, Mohd Imran and Ahmad Zaidi, Ahmad Mujahid and Prabagaran, Prasath Kesavan (2013) Energy absorption characteristics of polyurethane composite foam filled tubes subjected to quasi-static axial loading. Applied Mechanics and Materials, 315. pp. 872-878. ISSN 1660-9336

Sulaiman, Muhammad Azwan (2013) Penilaian kualiti persekitaran dalaman (IEQ) bangunan Akademik Institusi Pengajian Tinggi Awam (IPTA) Malaysia dalam konteks pengurusan fasiliti. Masters thesis, Universiti Tun Hussein Malaysia.

Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Malaysia.

Sulaiman, Zulkifli (2013) The influence of slag and PSAC on the wear resistance of composite aluminium. Masters thesis, Universiti Tun Hussein Malaysia.

Sulistyo, S. and Ariffin, S. and Mahzan, S. (2013) Manufacturing of electrolyte and cathode layers SOFC using atmospheric spraying method and its characterization. Internat. J. of Sci. and Eng., 4 (1). pp. 30-33.

Sulistyo, S. and Arifin, Saparudin and Mahzan, Shahruddin (2013) The effect of pretreatment powder using ball mill and ultrasound on the properties of single cell solid oxide fuel cell. Applied Mechanics and Materials, 315. pp. 972-976. ISSN 1660-9336

Syed Jamalil, Syed Akhmal (2013) Solving economic dispatch problem using particle swarm optimization. Masters thesis, Universiti Tun Hussein Malaysia.

T

Tajul Baharuddin, M. F. and Othman, A. R. and Taib, S. and Hashim, R. and Zainal Abidin, M. H. and Radzuan, M. A. (2013) Evaluating freshwater lens morphology affected by seawater intrusion using chemistry-resistivity integrated technique: a case study of two different land covers in Carey Island, Malaysia. Environ Earth Sci, 69. pp. 2779-2797.

Tee, Tze Kiong (2013) Pengintegrasian kemahiran berfikir dan peta minda Buzan bagi penguasaan kemahiran berfikir aras tinggi. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.

Tengku Ahmad, Tengku Marissa (2013) Climate control utilizing solar powered ventilation system for parked car. Masters thesis, Universiti Tun Hussein Malaysia.

Tengku Zahari, Tengku Noraisyah (2013) Impak program latihan dalam kalangan pengusaha homestay ke arah keberkesanan pembangunan program homestay di peringkat komuniti: kajian dari perspektif pengusaha. Masters thesis, Universiti Tun Hussein Malaysia.

Thazali, Nur Athirah (2013) Investigations of ageing mechanism and electrical withstand performances of the field aged 132 kV PMU Skudai's ceramic post insulator. Masters thesis, Universiti Tun Hussein Malaysia.

Tong, Y. G. and Tang, S. K. (2013) Plenum window insertion loss in the presence of a line source—a scale model study. The Journal of the Acoustical Society of America, 133 (3). pp. 1458-1467.

U

Ubale, Mohammad Yahaya (2013) Comparative study between Malaysian and Nigerian formal low cost housing policy issues. Masters thesis, Universiti Tun Hussein Malaysia.

Ulusow, Shafi’i Mo’allim Ali (2013) Bandwidth optimization of ultra-wideband (UWB) antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ulusow, Shafi’i Mo’allim Ali (2013) Bandwidth optimization of ultra-wideband (UWB) antenna. Masters thesis, Universiti Tun Hussein Malaysia.

Umar, Mohammed Akilu (2013) A study of the process and barriers of property tax revenue generation in local government (a case study of Pasir Gudang Municipal Council). Masters thesis, Universiti Tun Hussein Malaysia.

V

Valdez, Clara (2013) Voltage stabilizer of generator output through field current control using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Mohd, Wan Syahidah (2013) Linear quadratic gaussian (LQG) controller design for servo motor. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Muda, Wan Hanim Nadrah (2013) Leadership capability of team leaders in construction industry. Doctoral thesis, Universiti Teknologi Malaysia.

Wan Zakaria, Wan Abdul Hakim (2013) Persediaan pelaksanaan learn and work assignment (LWA) dalam sesi latihan industri untuk pelajar Kejuruteraan Mekanikal di POLIMAS. Masters thesis, Universiti Tun Hussein Malaysia.

Y

Yaakub, Muhamad Faizal (2013) The implementation of sinusoidal PWM on single phase 5-level cascaded H-bridge multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaan, Yee Choy and Kim, Gaik Tay and Chee, Tiong Ong (2013) Modulation of Nonlinear Waves in an Inviscid Fluid (Blood) Contained in a Stenosed Artery. Applied Mathematical Sciences, 7 (2013). pp. 5003-5012.

Yaan, Yee Choy and Kim, Gaik Tay and Chee, Tiong Ong (2013) Solitary wave modulation in an artery with stenosis filled with a viscous fluid. Journal of Mathematics and Statistics, 9 (3). pp. 256-261. ISSN 1549-3644

Yahaya, Izat (2013) Kajian keberkesanan olahan larut lesapan menggunakan elektrod aluminum dan ferum dalam sistem elektro-penggumpalan. Masters thesis, Universiti Tun Hussein Malaysia.

Yahaya, Mohd Zubir (2013) Evaluation of heat exchanger on thermoacoustic performance. Masters thesis, Universiti Tun Hussein Malaysia.

Yaqoob, Mansoor Taha (2013) Transformer thermal model of the disk coils with non directed oil flow. Masters thesis, Universiti Tun Hussein Malaysia.

Yaqub, Muhammad Atif (2013) Multi fingered robot hand in industrial robot application using tele-operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yeoh, Kim Hao (2013) Efficiency improvement of assembly line: case study of bus seat manufacturer. Masters thesis, Universiti Tun Hussein Malaysia.

Younis Al-Ashqar, Sayf Mohamed Dhiya (2013) The relationship between information technology usage and job satisfaction in administration at Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Ahmad Muhyiddin (2013) A comparative study of conventional PID and fuzzy-PID for DC motor speed control. Masters thesis, Universiti Tun Hussein Malaysia.

Yusof, Mohd Faiz Husny (2013) Development of dc-dc converter for dc motor using fuzzy logic controller. Masters thesis, Universiti Tun Hussein Malaysia.

Yusuf, Nur Kamilah (2013) A new approach of direct recycling of aluminium alloy chips (AA6061) in hot press forging process. Masters thesis, Universiti Tun Hussein Malaysia.

Z

Zahari, I. and Abas, M. A. and Mat Arishad, N. I. and Zainal Abidin, S. F. and Muhamad Said, M. F. (2013) Experimental study to identify common engine part load conditions between Malaysian city driving and NEDC test. International Review of Mechanical Engineering (I.RE.M.E.), 7 (6).

Zaidon, Norhidayah (2013) Kesediaan pembimbing dalam pelaksanaan Program Pembelajaran Berasaskan Kerja (PBK) di Proton Holdings Berhad, Shah Alam, Selangor. Masters thesis, Universiti Tun Hussein Malaysia.

Zainal Abiddin, Norhasni and Ismail, Affero and Taniredja, Tukiran (2013) Enhancing quality of higher education for graduate research students development. EDUCARE: International Journal for Educational Studies, 5 (2). pp. 133-146. ISSN 1979-7877

Zainal Abidin, Mohd Hazreek and Saad, Rosli and Wijeyesekera, Devapriya Chitral and Ahmad, Fauziah (2013) Soil resistivity influence due to the different utilization of electrical resistivity array. Electronic Journal of Geotechnical Engineering, 18. pp. 5643-5654.

Zainal Abidin, Munira and Z. A., Z. A. and Rosnah, Rosnah and S., S. and Zaulia, Zaulia and O., O. and Russly, Russly and A. R., A. R. (2013) Effect of postharvest storage of whole fruit on physico-chemical and microbial changes of fresh-cut cantaloupe (Cucumis melo L. reticulatus cv. Glamour). International Food Research Journal, 20 (1). pp. 501-508. ISSN 2231-7546

Zainal Abidin, Nabilah and Akasah, Zainal Abidin Akasah and Husin, Muhammad Riduwan (2013) A preliminary design of janazah washing area: upholding human dignity in the last rite-diversity among different. The International Journal of Social Sciences, 8 (1). pp. 103-122.

Zainol Abidin, Mohamad Hafiz and Mohamad, Mahmod Abd Hakim and Ahmad Zaidi, Ahmad Mujahid and Wan Mat, Wan Ali (2013) Experimental study on ballistic resistance of sandwich panel protection structure with kenaf foam as a core material against small arm bullet. Applied Mechanics and Materials, 315. pp. 612-615. ISSN 1660-9336

Zainol Abidin, Mohamad Hafiz and Mohamad, Mahmod Abd Hakim and Ahmad Zaidi, Ahmad Mujahid and Wan Mat, Wan Ali (2013) Experimental study on ballistic resistance of sandwich panel protection structure with kenaf foam as a core material against small arm bullet. Applied Mechanics and Materials, 315 (NIL). pp. 612-615. ISSN 1660-9336

Zainuddin, Zarita and Lai, Kee Huong and Pauline, Ong (2013) Reliable epileptic seizure detection using an improved wavelet neural network. Australasian Medical Journal, 6 (5). pp. 308-314. ISSN 1836-1935

Zainuddin, Zarita and Pauline, Ong (2013) Design of wavelet neural networks based on symmetry fuzzy C-means for function approximation. Neural Computing and Applications, 23 (NIL). pp. 247-259. ISSN 0941-0643

Zakaria, Hanis (2013) Effects of storage temperature and storage duration of biodiesel properties, visual appearances and emision. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Haslina (2013) Faktor individu dan faktor persekitaran yang mempengaruhi pemindahan latihan terhadap pencapaian akademik dalam kalangan pelajar Fakulti Kejuruteraan Elektrik UTeM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Intan Suria (2013) RFID-based indoor positioning of autonomous aid for disable people. Masters thesis, Universiti Tun Hussein Malaysia.

Zakaria, Mohd Sharif (2013) Development of a non-pulsating buck-boost converter with continuous current mode (CCM). Masters thesis, Universiti Tun Hussein Malaysia.

Zakaria, Noor Shazliza (2013) Rice husk/dust air particle sensor using zigbee wireless sensor network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Salmi (2013) Analysis and reduction of stimulated raman scattering in DWDM fibre optic communication system. Masters thesis, Universiti Tun Hussein Malaysia.

Zakaria, Zahariah (2013) Novel scheme for analysing the noise limitations of average and guided soliton communication systems. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zakariah, Siti Hajar (2013) Beban tugas guru mempengaruhi penggunaan sumber teknologi pendidikan di empat buah Sekolah Menengah Teknik dan Vokasional di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zaratang, Lucian (2013) Load flow studies on stand alone microgrid system in Ranau, Sabah. Masters thesis, Universiti Tun Hussein Malaysia.

Zulkarnain, Maizul Haffin (2013) Design and simulation study of obstacle based passive micromixer. Masters thesis, Universiti Tun Hussein Malaysia.