Items where Year is 2014

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | W | Y | Z
Number of items: 258.

A

A. Kadhim Fahad, Abu Abdullah (2014) Modeling and control of quartz crystal operated in liquid for bio-sensing application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab Ghani, Mohd Khairul Akli (2014) Development of PID current control for DC motor using arduino. Masters thesis, Universiti Tun Hussein Malaysia.

Ab Muttalib, Siti Aida (2014) Gaya kepimpinan terhadap pemilihan strategi pengajaran dan pembelajaran. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Hadi, Nik Aznan (2014) Air breakdown under lightning impulse with plane-plane electrode. Masters thesis, Universiti Tun Hussein Malaysia.

Ab. Manap, Siti Salwa (2014) Pengajaran guru opsyen dan bukan opsyen kemahiran hidup bersepadu sekolah rendah di Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Abbas Allawi (2014) Optimization of parameters of laser non-linear inclined cutting on stainless steel metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Estabraq Khudhair (2014) Pressure loss prediction and control model for water treatment units. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Nurliana (2014) Simulation of speed control brushless DC motor using gaussian fuzzy logic controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Misbahul Muneer and Kaamin, Masiri and Mohamad, Mahmod Abd Hakim and Mohmad Omar, Mohamad Hanif and Mohamed Nor, Mohd Hadri and Abd Aziz, Azizul Rahman (2014) Rekabentuk model sistem guna semula air wudhuk. Journal of Techno Social, 5 (1). pp. 33-57. ISSN 2229-8940

Abd. Rahman, Diyya Hidayah (2014) FPGA-based digital controller for dc-dc converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdol Rahman, Mohd Nasrull (2014) Development of an ergonomic risk assessment tool for work postures. Doctoral thesis, Universiti Teknologi Malaysia.

Abdul Jalil, Aishah and Triwahyono, Sugeng and Hairom, Nur Hanis Hayati and Mohamed Razali, Nurul Aini (2014) Facile synthesis of a zinc oxide nanoparticle by electrochemical method. Malaysian Journal of Fundamental and Applied Sciences, 10 (3). pp. 165-168. ISSN 2289-5981

Abdul Latif, Abdul Mutalip (2014) Pembangunan kemahiran penyelesaian masalah berlandaskan projek origami. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Nadiyatul Akmar (2014) UWB antenna using indium tin oxide (ITO). Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Mutahar, Lidyanur (2014) Development of repetitive current control for lead acid battery using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Mohd Zain (2014) A concept for wildlife tracking using ultra high frequency (UHF) radio. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Rahman, Afzainizam (2014) Analisis keselesaan termal di bangunan fakulti Universiti Tun Hussein Onn Malaysia (UTHM), Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Talib, Yuraimy Yakimin (2014) Optimization of PEDOT: PSS thin film for organic solar cell application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Wahab, Siti Nur Wahidah (2014) Motor control system development using microcontroller based on PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulguad, Osama. H. (2014) Aerodynamic comparison and validation of rans, K-ω, standard K-ɛ and URANS simulations of flat plate film-cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdull Patas, Nor Hasnati (2014) Design study of outer rotor field excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah, Abdul Hadi (2014) Development of p-resonant voltage control for dc motor using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Abdullah (2014) Improved cuckoo search based neural network learning algorithms for data classification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Hadi (2014) Intruder localization wireless sensor network radar design with virtual reference tags. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Asrul Affendi (2014) Associated factor of mortality rate amongst patients with AIDS and HIV-TB co-infections using zero inflated negative binomial method. Doctoral thesis, Universiti Sains Malaysia.

Abdullah, Nurul Azma (2014) An improved file carver of intertwined jpeg images using X_myKarve. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Rohafiza (2014) Design zero-voltage switching DC-DC buck converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Siti Ashraf (2014) Fabrication of smart glass electrochromic device using rf magnetron sputtering. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah @ Abdul Rahman, Suhaimi (2014) Effect of field utilization factor on air breakdown level under impulse lightning in point-sphere electrode system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah Alhamzi, Belal Mohammed (2014) A study of energy scavenging strategy in a tapping tree power. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Faridah (2014) Towards new generation of sustainable catalysts: Study of shape and size controlled TiO2 nanoparticles in photocatalytic degradation of industrial dye. Doctoral thesis, University of Canterbury.

Abu Hassan, Roslan (2014) Kompetensi guru bukan opsyen yang mengajar kemahiran teknikal di Kolej Vokasional Negeri Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Talib, Mohd Khaidir and Yasufuku, Noriyuki (2014) An overview on Japan and Malaysia peat relating to geotechnical characteristic. International Journal of Integrated Engineering, 6 (1). pp. 1-7. ISSN 2229-838X

Affandi, Iezzat Emeer and Suratman, Nur Haizarisha and Abdullah, Shakilah and Ahmad, Wan Azlina and Zakaria, Zainul Akmar (2014) Degradation of oil and grease from high-strength industrial effluents using locally isolated aerobic biosurfactant-producing bacteria. International Biodeterioration & Biodegradation, 95. pp. 33-40. ISSN 0964-8305

Affendi, Fatimah (2014) Tahap kepuasan kerja dan komitmen organisasi dalam kalangan guru kolej vokasional: pendekatan structural equation model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ahmad Fauzi (2014) Kepimpinan instruksional dalam peningkatan pengajaran dan pembelajaran yang berkesan dalam kalangan pensyarah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ahmad Nur Aizat and Hasan, Sulaiman and H., Norafifah (2014) Development of computerize value stream system. Advanced Materials Research, 915. pp. 1405-1411. ISSN 1662-8985

Ahmad, Ahnaish Muftah (2014) Perception of managerial staff and workers on labour motivation and timing of operation factors in agriculture productivity in Libya. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Siti Hasziani (2014) Integration of program evaluation and review technique (PERT), gantt chart and genetic algorithm in project management scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Mazlan, Nor Adillah (2014) Design improvements of 12 slot-14 pole hybrid excitation flux switching motor with 1.0 kg permanent magnet for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad Rebudi, Muhammad Faddil (2014) Development of 3-phase inverter with PID voltage control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Zamzam Hohamed (2014) Comparison of data hiding using LSB and DCT for image. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alakari, Salim Tahir (2014) A comparative analysis of data redundancy and execution time between relational and object oriented schema table. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Ashikin (2014) An improved multilayer perceptron based on wavelet approach for physical time series prediction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Noorwirdawati (2014) Shear strengthening of pre-cracked and non pre cracked reinforced concrete continuous beams using bi directional CFRP strips. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Nurdin (2014) Analysis of corrosion fatigue for commercially pure titanium using nitrogen ion implantation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Alamari, Abduladhim Mohamad (2014) A comparative study of watermarking techniques in spatial and frequency domains. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Hussein, Maher (2014) Development of a computer aided decision support tool for selecting organisational improvement initiatives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Moftah, Abu Baker (2014) Comparative analysis between FPA and COCOMO techniques for software cost estimation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alzalet, Abdusalam Rajb (2014) Dynamic load forecasting for commercial power network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amiruddin, Mohd Hasril (2014) Keberkesanan modul asas keusahawanan bercirikan strategi pembelajaran masteri terhadap pelajar Orang Asli. Doctoral thesis, Universiti Kebangsaan Malaysia.

Anthony, Roystone (2014) Reliability analysis of distribution network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anual, Siti Nurhafizah (2014) Persepsi pelajar terhadap perbezaan kemudahan prasarana dalam membantu pembudayaan sains dan teknologi pelajar di Kolej Vokasional Zon Selatan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ariffin, L. M. and Senu, N. and Suleiman, M. and Majid, Z.A. (2014) Embedded explicit two-step Runge-Kutta-Nystrom for solving special second-order IVPs. Applied Mathematical Sciences, 8 (94). pp. 4655-4673. ISSN 1312-885X

Asad, Muhammad Mujtaba (2014) Matlab based modeling and simulink package for DC-DC boost convertor to enhance learning process of power electronics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asmayou, Ali. H. (2014) Simulation of palm oil and methanol mixing in stirred tank by implement a normal and fractal baffles. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Atailah, Mohd Nizam (2014) Lightntng protectton of quadruple circuit 275/132kV transmission line. Masters thesis, Universiti Tun Hussein Malaysia.

Azahari, Mohamad Azhar (2014) A study on extrusion of multiple material bonding for fused depostion modeling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Baharuddin, Asiana (2014) Amalan penyeliaan pensyarah pembimbing terhadap pelaksanaan latihan industri di Politeknik Sultan Haji Ahmad Shah Kuantan, Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahron, Zakria Ahmed S. (2014) Development of synchronverter control for induction motor connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bajerai, Qaddafi Abdullah (2014) Fuse blow scheme and its impact on overhead distribution system reliability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bako, Hadiza Yakubu (2014) Forecasting pelagic fish in Malaysia using ets state space approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Berahim, Nawi (2014) Development of PID voltage control for DC motor using arduino. Masters thesis, Universiti Tun Hussein Malaysia.

C

Chairol Mohd Feroz, Kairil Fariq (2014) Vehicle tracking and speed estimation for traffic surveillance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Mok @ Adnan, Mohd Dasri (2014) Lightning impulse tests on air-breakdown level in point-plane electrode configuration. Masters thesis, Universiti Tun Hussein Malaysia.

Che Muhamad Khabali, Mohd Khazani (2014) Investigation of increasing fault Gas in excitation transformers. Masters thesis, Universiti Tun Hussein Malaysia.

Che Rusuli, Muhamad Saufi (2014) Linkage between knowledge management practices towards library user’s satisfaction at Malaysian University Libraries. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

D

Dahri, Muhammad Hashim (2014) Dynamic tunability enhancement of reflectarray antenna using non-homogeneous dielectric materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Daud, Nur Atiqah (2014) Modelling and control of heat exchanger by using bio-inspired algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Deraman, Farih (2014) Development of p resonant current control for dc motor by using Arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elewe, Adel Muhsin (2014) Feasibility study on producing functional parts using molding technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Feriyanto, Dafit (2014) Development of nanocrystalline Fe80Cr20 alloy using combination technique of ball milling and ultrasonic treatment for fuel cell interconnector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Md Din, Mohd Fadhil and Mohd Yusoff, Abdul Rahim (2014) Adsorption of phosphate from domestic wastewater treatment plant effluent onto the laterites in a hydrodynamic column. Chemical Engineering Journal, 28 (NIL). pp. 10-17. ISSN 1385-8947

Fulazzaky, Mohamad Ali and Khamidun, Mohd Hairul and Md Din, Mohd Fadhil and Mohd Yusoff, Abdull Rahim (2014) Adsorption of phosphate from domestic wastewater treatment plant effluent onto the laterites in a hydrodynamic column. Chemical Engineering Journal, 258. pp. 10-17. ISSN 1385-8947

G

Ghitheeth Al-Challabi, Ali Hussein (2014) Heat transfer enhancement in a rectangular duct by using winglet and nanofluids. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H

Hairom, Nur Hanis Hayati and Mohammad, Abdul Wahab and Hassan Kadhum, Abdul Amir (2014) Effect of various zinc oxide nanoparticles in membrane photocatalytic reactor for Congo red dye treatment. Separation and Purification Technology, 137. pp. 74-81. ISSN 1383-5866

Hairom, Nur Hanis Hayati and Mohammad, Abdul Wahab and Hassan Kadhum, Abdul Amir (2014) Nanofiltration of hazardous congo red dye: performance and fluxdecline analysis. Journal of Water Process Engineering, 4. pp. 99-106. ISSN 2214-7144

Hairom, Nur Hanis Hayati and Mohammad, Abdul Wahab and Kadhum, Abdul Amir Hassan (2014) Nanofiltration of hazardous Congo red dye: performance and flux decline analysis. Journal of Water Process Engineering, 4. pp. 99-106. ISSN 2214-7144

Hamin, Farhana (2014) Electronic problem based learning (ePBL) sebagai medium bagi memudahcarakan pembelajaran pemindahan ilmu dalam kalangan pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamjah, Mohd Khairulamzari (2014) Optimization of new semi-automatic TIG welding process for surface quality through taguchi method. Masters thesis, Universiti Tun Hussein Malaysia.

Hamzah, Ahmad Azlan (2014) Effect of gap lenghts of sphere-sphere electrodes on air breakdown level under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Shipun Anuar (2014) Development of harmonic suppressed reconfigurable fractal dipole antenna. Doctoral thesis, Universiti Teknologi Malaysia.

Hariri, Azian and Azreen, N. and Abdull, Norhidayah and Leman, M and M Yusof, M. Z. (2014) Determination of customer requirement for welding fumes index development in automotive industries by using quality function deployment approach. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1609-1619. ISSN 2229-8649

Hariri, Azian and Paiman, Nuur Azreen and Leman, Abdul Mutalib and Md. Yusof, Mohammad Zainal (2014) Development of welding fumes health index (WFHI) for welding workplace’s safety and health assessment. Iranian Journal of Public Health, 43 (8). pp. 1045-1059. ISSN 2251-6085

Harun, Hairuddin and Mat Mom, Siti Khadijah (2014) Leadership development and sustainable leadership among TVET student. Journal of Management Policies and Practices, 2 (2). pp. 27-38. ISSN 2333-6048

Harun, Hasnida and Anuar, Aznah Nor (2014) Development and utilization of aerobic granules for soy sauce wastewater treatment optimization by response surface methodology. Jurnal Teknologi, 69 (5). pp. 31-37. ISSN 2180–3722

Harun, Hasnida and Nor Anuar, Aznah and Ujang, Zaini and Othman, Inawati and Rosman, Noor Hasyimah (2014) Efficiency of aerobic granulation technology in treating high strength soy sauce wastewater. Sains Malaysiana, 43 (10). pp. 1485-1490. ISSN 1266-039X

Harun, Hasnida and Nor Anuar, Aznah and Ujang, Zaini and Rosman, Noor Hasyimah and Othman, Inawati (2014) Performance of aerobic granular sludge at variable circulation rate in anaerobic–aerobic conditions. Water Science & Technology, 69 (11). pp. 2252-2257. ISSN 2227-524X

Hassan, S. and A. Rahim, E. and Mohid, Z. and Warap, N.M. (2014) Dynamic analysis of micro-milling machine. Applied Mechanics and Materials, 465. pp. 699-703. ISSN 1660-9336

Hayder, Ali Mohammed (2014) Numerical study of jet impingement cooling on a smooth curve surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussian, Ammar Husaini (2014) PID-hysteresis voltage control technique for three phase induction motor (matlab simulink and arduino). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Mohd Najib (2014) Three phase inverter for induction motor by using pi-repetitive controller with arduino. Masters thesis, Universiti Tun Hussein Malaysia.

I

Iberahim, Hasmah (2014) Pengaruh faktor persekitaran terhadap kecemerlangan akademik pelajar fakulti kejuruteraan mekanikal dan pembuatan serta pelajar Fakulti Kejuruteraan Elektrik di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Ismail Ishaq (2014) Performance studies of HEFSM with 6 slot- 7 pole for HEV application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohd Norihan and Adi Siswanto, Waluyo and Ahmad Zaidi, Ahmad Mujahid (2014) Numerical study on failure process of aluminium plate subjected to normal impact by hemispherical projectiles. Applied Mechanics and Materials, 660 (NIL). pp. 598-602. ISSN 1660-9336

Ibrahim, Muhammad Shahrul Shafendy (2014) Treatment of food processing industrial wastewater using two stages anaerobic system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Zarina (2014) A comparative study of the AHP and TOPSIS methods for implementing load shedding scheme in a pulp mill system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iderus, Samat (2014) The field oriented control of a permanent magnet synchrounous motor (PMSM) by using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Affero and Zainal Abiddin, Norhasni (2014) Issues and challenges of technical and vocational education and training in Malaysia towards human capital development. Middle-East Journal of Scientific Research 19 (Innovation Challenges in Multidiciplinary Research & Practice), 19. pp. 7-11. ISSN 1990-9233

Ismail, Affero and Zainal Abiddin, Norhasni and Hassan, Razali and Ro’is, Ihsan (2014) The profound of students’ supervision practice in higher education to enhance student development. Higher Education Studies, 4 (4). pp. 1-6. ISSN 1925-4741

Ismail, Farah Najwa (2014) Kecerdasan emosi dan komitmen organisasi dalam kalangan pensyarah di Politeknik Sultan Abdul Halim Muadzam Shah, Jitra, Kedah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Ismaaini (2014) Risk assessment of time and cost overrun factors throughout construction project lifecycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Muhammad Yusri (2014) One-dimensional simulation of a retrofitted medium duty engine running using compressed natural gas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nurul Ashikin (2014) Etnoentomologi dalam kalangan kaum Orang Asli dan Melayu di Semenanjung Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Sushilawati (2014) Water absorption and salt attack resistance of coal ash brick made of different percentage of foam content. Doctoral thesis, Universiti Teknologi Malaysia.

J

Jaber Al-Talqani, Ayad Jasim (2014) Numerical simulation of heat transfers on a circular cylinder by an impinging jet with nanofluid. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaini, Norhaslina (2014) Vibration analysis of a beam structure attached with two dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Jaini, Nur ‘Afiqah (2014) Transmission losses cost allocation in restructed electricity market environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamal, Siti Hairani (2014) Distribution system reliability improvement using distributed generators. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamali, Qadir Bakhsh (2014) Design and analysis of a hybrid locomotion system for mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamalludin, Mohd Riduan (2014) Enhancement of antifouling properties using rice husk silica particles in polysulfone membrane and optimization of its operating condition. Masters thesis, Universiti Tun Hussein Malaysia.

Jamaludin, Jamaliah (2014) Kesediaan guru kolej vokasional dalam pengajaran amali teknologi elektronik di Negeri Pahang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, M. I. and Mohamad Nor, N. H. and A. Kasim, N. A. and Saedon, J. B. and Muhamad, N. (2014) Parameter optimization of debinding injection moulded Ti-6Al-4V mix with palm stearin and polyethylene. In: Applied Mechanics and Materials.

Jamit, Rexca (2014) An evaluation of aerodynamics performance of a moving car with wind turbine system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jasman, Kamal (2014) Kesan pembelajaran berasaskan masalah terhadap motivasi pelajar dalam mata pelajaran kemahiran hidup. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Johan, Mohd Rafie and Suhaimy, Syazwan Hanani Meriam and Yusof, Yusliza (2014) Physico-chemical studies of cuprous oxide (Cu2O) nanoparticlescoated on amorphous carbon nanotubes ( -CNTs). Applied Surface Science, 289. pp. 450-454. ISSN 0169-4332

Jumelan, Juliza Ezaida (2014) Penguasaan kemahiran insaniah pelajar dalam penglibatan aktiviti kokurikulum badan beruniform di UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jumiran, Mohamad Nurizwan (2014) Kesan teknik “hunTTO" square” terhadap pencapaian pelajar bagi mata pelajaran matematik di sekolah rendah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jun, Ma and Meng, Qingshi and Zaman, Izzuddin and Zhu, Shenmin and Michelmore, Andrew and Nobuyuki, Kawashima and Wang, Chun H. and Kuan, Hsu-Chiang (2014) Development of polymer composites using modified, high-structural integrity graphene platelets. Composites Science and Technology, 91 (NIL). pp. 82-90. ISSN 0266-3538

Jusoh@Mamat, Aizam (2014) Persepsi pelajar terhadap aktiviti origami berkumpulan dalam pembentukan kemahiran kerja berpasukan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

K., Khairu and M ., Ibrahim and Hassan, S. and Hehsan, H. and Kasmin, Ashari and E., Fazial (2014) Study on layer fabrication for 3D structure of photoreactive polymer using DLP projector. Applied Mechanics and Materials, 465. pp. 911-915. ISSN 1660-9336

Kamarudin, Harith Azidin (2014) Impak penggunaan multimedia dalam pengajaran topik isometrik terhadap pencapaian dan motivasi pelajar tingkatan 2. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruzaman, Ahmad Nassaruddin (2014) Reliability evaluation of Sabah transmission and sub-transmission networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kandar, Ahmad Luthfi (2014) Kemahiran employability dalam kalangan pelajar Kolej Vokasional Kluang Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasmin, Ashari (2014) Design for sustainability (D4S) in product development using solidworks software: a case study of redesign a sugar cane extractor machine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Ijaz (2014) Driver’s fatigue detection system based on facial features. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kiyani, Arslan (2014) Design of reflectarray antenna integrated with FSS textured configurations for wireless communication applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

L

Lajis, Mohd Amri and Khamis, Siti Salwa and Yusuf, Nur Kamilah (2014) Optimization of hot press forging parameters in direct recycling of aluminium chip (AA 6061). Key Engineering Materials, 622 (NIL). pp. 223-230. ISSN 1013-9826

Liau, Agnes Siau Wei (2014) Stability assessment of 132kV Sabah grid-connected solar pV system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Libau, Charles Muling (2014) Transient response analysis for DC-DC boost converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liew, Chia Woon (2014) Obstacle avoidance robot applying fuzzy control system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M. Alsharif, Ali Omar (2014) Neutral point inverter controller using H infinity techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ma, Jun and Meng, Qingshi and Zaman, Izzuddin and Zhu, Shenmin and Michelmore, Andrew and Kawashima, Nobuyuki and Chun, H. and Wang, Hsu-Chiang Kuan (2014) Development of polymer composites using modified, high-structural integrity graphene platelets. Composites Science and Technology, 91. pp. 82-90. ISSN 0266-3538

Madar, Ahmad Rizal and Abdul Hamid, Rawiyah (2014) A theoretical review on critical success factors (CSFS) of entrepreneurship programs in community college. International Journal of Sustainable Development & World Policy, 3 (6). pp. 138-145. ISSN 2306-9929

Main, Nor Mazlana and A Talib, Rosnita and Ibrahim, Rushdan and Abdul Rahman, Russly and Mohamed, Ainun Zuriyati (2014) Suitability of coir fibers as pulp and paper. Agriculture and Agricultural Science Procedia, 2. pp. 304-311. ISSN 2210-7843

Majid, Mariam (2014) Study of artificial neural network scheme application in manufacturing industry for monitoring-diagnosis bivariate process variation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marian, Mohd Fairuz (2014) Synergistic artificial neural network scheme for monitoring and diagnosis of multivariate process variation in mean shifts. Masters thesis, Universiti Tun Hussein Malaysia.

Masood, Ibrahim and Hassan, Adnan (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications, 41 (16). pp. 7579-7595. ISSN 0957-4174

Masood, Ibrahim and Zainal Abidin, Nadia Zulikha and Roshidi, Nur Rashida and Rejab, Noor Azlina and Johari, Mohd Faizal (2014) Design of an artificial neural network pattern recognition scheme using full factorial experiment. Applied Mechanics and Materials, 465. pp. 1149-1154. ISSN 1660-9336

Masrol, S.R. and Ibrahim, M.H.I. and Adnan, S. and Amir Shah, M.S.S. and Main, N.M. and Esa, M.F. and Othman, M.H. (2014) Soda anthraquinone pulping of oil palm male flower spikes. Applied Mechanics and Materials, 660. pp. 373-377. ISSN 1662-7482

Masrol, S.R. and Siswanto, W.A. (2014) Stress concentration analysis of plate with circular hole : elasticity theory and finite element comparison. Applied Mechanics and Materials, 465. pp. 1385-1389. ISSN 1662-7482

Mat Husin, Azman (2014) Direct torque control induction motor drives. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Mom, Siti Khadijah (2014) Critical success factor bagi program keusahawanan di jabatan perdagangan politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Shah, Muhammad Amir (2014) Flexible link aerator for dissolved oxygen generation in tiger prawn pond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Yatim, Nurul Syazrah (2014) Development of time delay current control for lead acid battery 12 v DC by using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, M. H. and Todo, M. and Takano, Hiromitsu and Yonezawa, Ikuho (2014) Finite element analysis of osteoporotic vertebrae with first lumbar (L1) vertebral compression fracture. International Journal of Applied Physics and Mathematics, 4 (4). pp. 267-274. ISSN 2010-362X

Md Amin, Izatti (2014) Study on transmission congestion management for restructuring market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Harun, Zaiha Nabila (2014) Kompetensi guru dalam pengajaran amali reka bentuk dan teknologi di Sekolah Rendah Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Noor, Nurazuwa (2014) Physical performance and durability evaluation of rubberized concrete. Doctoral thesis, Kyushu University.

Miaat, Eriniwati Aliza (2014) Faktor yang mendorong kecenderungan pelajar kolej vokasional ke arah bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Suhaimi (2014) Energy efficiency improvement for faculty of technical and vocational education building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ariffin, Siti Noor Aishah (2014) An automatic traffic cones dispenser and collector system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Mokhtar, Shah Jahan (2014) Simulation of solid fuel combustion in the cyclone combustion chamber using fluent-14.0. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Nasir, Nadia Nurnajihah (2014) Vibration simulation of plate with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed, Sulzakimin (2014) Malaysian local governments’ role towards sustainable development focusing on knowledge transfer practices framework. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Alazomui, Outman (2014) On the development of computer code for aircraft flight dynamics analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ibrahim, Izan Rozaimie (2014) Tinjauan pendapat pelatih ke atas pentaksiran berasaskan institusi di Institusi Latihan Kemahiran Awam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Nurul Nadia (2014) Development of time delay voltage control for lead acid battery using arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Akmal Nizam and Ismail, Farzad (2014) Study of an entropy-consistent Navier–Stokes flux. International Journal of Computational Fluid Dynamics, 27 (1). pp. 1-14. ISSN 1029-0257

Mohammed, Mohammed Akram (2014) Quasiturbine rotor development optimization. Masters thesis, Universiti Tun Hussein Malaysia.

Mohammed Saif, Yazid Abdulsameea (2014) Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Usman, Abdullahi and Abdullah, Kamil (2014) Consolidation of material and waste management parameters for development of sustainable building rating systems. Journal of Built Environment, Technology and Engineering, 4. pp. 274-283. ISSN 0128-1003

Mohamud Shire, Abdirahman (2014) Archimedean spiral antenna embedded with frequency selective surface for wideband applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Alwi, Meor Mohd Nazir (2014) Kecenderungan pelajar Pusat Latihan Teknologi Tinggi (ADTEC) Batu Pahat memilih latihan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Faiz, Nur Sofurah (2014) Internationalisation as mutual adjustment in the learning and teaching experiences of international students and academic staff: a case study in a Malaysian Technical University Setting. Doctoral thesis, University of South Australia.

Mohd Fauzi, Noor Akhmazillah (2014) Quality improvement of manuka honey through the application of high pressure processing. Doctoral thesis, University of Auckland.

Mohd Hatta, Mohd Zainuri (2014) Investigation of organic composition of potential plants as alternative fiber in paper making industry. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Mokhtar, Mohd Firdaus (2014) Mango (Harum Manis) quality grading system. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nasir, Muhamad Alfie Yazid and Zakaria, Normah and Hamzah, Norhasyimah and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida (2014) Student’s attendance system using QR code. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Mohd Rahman, Hamijah (2014) Fuzzy random regression to improve coefficient estimation for Malaysian Agricultural Industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Taha, Norreza (2014) Stres guru yang mengajar subjek reka bentuk dan teknologi (RBT) di sekolah rendah di Kuantan. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Yassin, Zaris Izzati (2014) Exploring the bilateral and hybrid model in deregulated electricity market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zain, Fadzly (2014) Limitation of lithium fluoride (LiF) properties for passivation layer in organic solar cells application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Z. and Warap, N. M. and Hassan, S. and Ismail, M.I.S. and Ibrahim, R. and A. Rahim, E. (2014) Numerical analysis of laser heating for laser assisted micro milling application. Applied Mechanics and Materials, 465. pp. 720-724. ISSN 1660-9336

Mohid, Zazuli and Liman, M.A. and Rahman, M. R. A. and Rafai, Noor Hakim (2014) Dissimilar materials laser welding characteristics of stainless steel and titanium alloy. Applied Mechanics and Materials, 465 (1). pp. 1060-1064. ISSN 1660-9336

Moris, Alexsteir (2014) Critical point study in the Sabah power grid for cascading failure blackouts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Morsin, Marlia (2014) Pembangunan sensor asid borik menggunakan sifat resonans plasmon permukaan setempat nanoplat emas. Doctoral thesis, Universiti Kebangsaan Malaysia.

Muda @ Ali, Rosnani (2014) Bandpass filter design with spurious frequency reduction capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Nor Azrinna (2014) Design of zero-current switching DC-DC buck converter. Masters thesis, Universiti Tun Hussein Malaysia.

Muhammad Akram, Muhammad Akram and Yaqoob, Naveed and Kavikumar, Jacob (2014) Interval-valued fuzzy ku-ideals of ku-algebras. International Journal of Pure and Applied Mathematics, 92 (3). pp. 335-349. ISSN 1311-8080

Muhammad Marhaban, Agus Dwi Anggono (2014) Combined method for die compensation in sheet metal forming. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Muhyiddin, Ahmad Haniff (2014) A wireless camera supervision robot (CSR-BOT) for the cylindrical pipes and cables surfaces observation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhsin Al-Juhaishi, Lafta Flayih (2014) Numerical analysis of a fin-tube plate heat exchanger with winglets. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mulyana, Tatang (2014) Parametric and nonparametric identification of shell and tube heat exchanger mathematical model. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Murad, Muhamad Nasir and Sharif, S. and Rahim, E. A. and Riva, R. (2014) Effect of drill point angle on surface integrity when drilling titanium alloy. Advanced Materials Research, 845. pp. 966-970. ISSN 1022-6680

N

Nagapan, Sasitharan (2014) Structural modelling of cause and effect factors of construction waste generation in Malaysian Construction Industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nasir, N. F. and W. Daud, W. R. and Kamarudin, S. K. and Yaakob, Z. (2014) Methyl esters selectivity of transesterification reaction with homogenous alkaline catalyst to produce biodiesel in batch, plug flow, and continuous stirred tank reactors. International Journal of Chemical Engineering, 2014 (931264). pp. 1-13. ISSN 1687-806X

Ngasiman, Nurulhuda (2014) Kesan kaedah pembelajaran koperatif terhadap pencapaian pelajar dalam mata pelajaran matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Ismail, Nik Ainun (2014) Stress intensity factors of edge cracks in dissimilar joint plates. Masters thesis, Universiti Tun Hussein Malaysia.

Nik Ismail, Nik Mohd Asri (2014) Optimisation of microwave system for rice treatment. Masters thesis, Universiti Tun Hussein Malaysia.

Noh@Seth, Nur Hazirah and Nordin, Normayati and Othman, Safiah and Raghavan, Vijay R. (2014) Investigation of flow uniformity and pressure recovery in a turning diffuser by means of baffles. Applied Mechanics and Materials, 465-. pp. 526-530. ISSN 1660-9336

Nor, Maria Elena (2014) Error magnitude and directional accuracy for time series forecasting evaluation. Doctoral thesis, Universiti Teknologi Malaysia.

Nuraini Abdulganiyyi, Nuraini (2014) Specification of vertical semantic consistency rules of UML class diagram refinement using logical approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Omar, Zakaria (2014) Pendekatan konstruktif dalam inovasi pengajaran dan pembelajaran Bahasa Melayu di Kolej Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar Aashour, Omar Ali (2014) P-resonant control for the neutral point of three phase inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Syafiq Salman (2014) Investigating flush system method for minimum water usage of toilet system. Masters thesis, Universiti Tun Hussein Malaysia.

Othman, Noor Mala (2014) Pengaruh tahap stres terhadap kepuasan kerja dalam Kalangan pengajar kolej vokasional di Negeri Pahang. Masters thesis, Universiti Tun Hussein Malaysia.

P

Paiman, Nuur Azreen (2014) Determination of baseline data on respirable dust concentration for safety and health enhancement in selected small and medium industries in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pua, Poh Keong (2014) Tahap kemahiran insaniah dalam kalangan pelajar kejuruteraan tahun akhir di Politeknik KPM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Puteh, Saifullizam (2014) User profiling in the intelligent office. Doctoral thesis, Nottingham Trent University.

R

Rahiman, M.H.F. and Rahim, R.A. and Rahim, H.A. and Mohamad, E.J. and Zakaria, Z. and Muji, S.Z.M. (2014) An investigation on chemical bubble column using ultrasonic tomography for imaging of gas profiles. Sensors and Actuators B: Chemical, 202. pp. 46-52. ISSN 0925-4005

Rahiman, Mohd Hafiz Fazalul and Abdul Rahim, Ruzairi and Abdul Rahim, Herlina and Mohamad, Elmy Johana and Zakaria, Zulkarnay and Mohd Muji, Siti Zarin (2014) An investigation on chemical bubble column using ultrasonic tomography for imaging of gas profiles. Sensors and Actuators B: Chemical, 202 (NIL). pp. 46-52. ISSN 0925-4005

Ramli, Azuin (2014) Development and validation of a safety and health performance model for low cost housing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rashid, Rina (2014) Reliable power system operation plan - steady state contingency analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Siti Nurshahizan (2014) Gaya keibubapaan terhadap pencapaian akademik pelajar sekolah menengah. Masters thesis, Universiti Tun Hussein Malaysia.

Rosdi, Hairierosniza (2014) Air breakdown characteristics in plane-plane and sphere gap electrode configuration under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosmera, Norshazwani Afiqah (2014) The construction of house price index: modelling by incorporating absolute location. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Saad, Abdul Salam (2014) Three phase inverter for induction motor control using fuzzy-pi controller with arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabdin, Saiful Din Sabdin (2014) The effect of heat compression on mechanical behaviour and moisture content of pineapple leaf fibre and sugarcane bagasse waste for plate disposal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Faridah (2014) Compact microstrip bandpass filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Salmiza (2014) Design study of hybrid excitation flux switching motor for electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saiman, Mohd Fahmi (2014) 2 dimension woven kenaf reinforced unsaturated polyester composite. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sani, Winardi (2014) Multistage methanolysis of crude palm oil for biodiesel production in a pilot plant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sanusi, Shuaibu Babaji (2014) Epidemiological and awareness study of tuberculosis in Batu Pahat, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarani, Noor Amira (2014) Properties and environmental impact of recycling cigarette butts (CBs) in fired clay brick. Masters thesis, Universiti Tun Hussein Malaysia.

Saringat, Mohd Zainuri (2014) Attributes sanitization in object-oriented design to improve database structure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shah, Habib (2014) An improved artificial bee colony algorithm for training multilayer perceptron in time series prediction. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shahidan, Shahiron (2014) Damage classification in reinforced concrete beam by acoustic emission signal analysis. Doctoral thesis, Universiti Sains Malaysia.

Shamsudin, Muhamad Khairy (2014) Kajian terhadap sifat mekanik bagi jenis corak pengisian dalam proses pembuatan tiga demensi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suffian, Mohamad Mokhsen (2014) Performance and emissions of compression ignition engine fueled with preheated blend of vegetable oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Supian, Nazirah (2014) Keperluan program persediaan penempatan guru teknikal di kawasan pedalaman. Masters thesis, Universiti Tun Hussein Malaysia.

Syed Ali, Syed Jaafar (2014) Kompetensi guru dalam pengajaran amali teknologi pembinaan di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

T. Arifin, A. M. and Abdullah, S. and ., Md. Rafiquzzaman and Zulkifli, R. and Wahab, D. A. (2014) Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition. Fibers and Polymers, 15 (8). pp. 1729-1738. ISSN 1229-9197

T. Arifin, A.M. and Abdullah, S. and Zulkifli, R. and Wahab, D.A. (2014) Fatigue failures of differences behaviour on CSM/woven roving composite materials. Applied Mechanics and Materials, 471. pp. 335-340. ISSN 1660-9336

Tajul Arifin, Ahmad Mubarak and Abdullah, Shahrum and Zulkifli, Rozli and Abdul Wahab, Dzuraidah and Rafiquzzaman, Mohammad (2014) Behavior of chopped strand mat and woven roving under bending. Mechanical Testing, 56 (11-12). pp. 994-1000. ISSN 0025-5300

Takim, Selamat (2014) Minat pelajar dalam subjek kemahiran hidup bersepadu. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tali @ Razali, Mohd Hayumabdissalam (2014) Electric field modeling of outdoor insulator for optimized performance. Masters thesis, Universiti Tun Hussein Malaysia.

Tasuki, Norazleen (2014) An optimal load shedding scheme based on the analytical heirarchy approach: a case study of the Selangor Electrical System. Masters thesis, Universiti Tun Hussein Malaysia.

Tukiran, Norazlina (2014) Literasi pentaksiran dalam kalangan calon guru teknikal di IPTA Zon Selatan. Masters thesis, Universiti Tun Hussein Malaysia.

W

Wan Abas, Wan Hamidah (2014) Online position control system using incremental fuzzy control. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Hassan, Wan Azizurrahman (2014) Reverse engineering of micro light aircraft systems and design. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Husin, Wan Norhashimah (2014) Design improvement of outer-rotor hybrid excitation flux switching motor for in-wheel drive electric vehicle. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Kadir, Wan Muhamad Hanif (2014) Modelling and control of articulated robotic arm. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Mansor, Wan Nur Hasymy (2014) Penerapan unsur kecindan dalam proses pengajaran dan pembelajaran reka bentuk teknologi. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Yusop, Wan Mohd Fazli (2014) Faktor yang mendorong pencapaian akademik pelajar dalam program kimpalan di kolej vokasional. Masters thesis, Universiti Tun Hussein Malaysia.

Wong, Frederick Tsun Kiong (2014) A cost effective solar powered led street light. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wu, Jia Hang (2014) Maximum torque of combination threats for spur gear based on AGMA and JGMA standards. Masters thesis, Universiti Tun Hussein Malaysia.

Y

Yahaya, Intan Fazlina (2014) A new structure of 12Slot-10Pole field-excitation flux switching synchronous machine for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaziz, Nor Hidayah (2014) Digital speed and position control system incorporating an Incremental encoder. Masters thesis, Universiti Tun Hussein Malaysia.

Yunus, Nazira (2014) Design study of the proposed 12slot-14pole field excitation flux switching machine (FEFSM) for hybrid electric vehicles. Masters thesis, Universiti Tun Hussein Malaysia.

Yusof, Mohd Khairul Azhar (2014) Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh. Masters thesis, Universiti Tun Hussein Malaysia.

Yusuf, Nur Kamilah and Lajis, Mohd Amri and Daud, M.I. and Noh, Mohamad Zaky (2014) Effect of operating temperature on direct recycling aluminium chips (AA6061) in hot press forging process. Advanced Materials Research, 315 (NIL). pp. 728-732. ISSN 1022-6680

Z

Zaib, Zairoslawanee (2014) Pemilihan kerjaya pelajar tingkatan 6 atas di sekolah menengah kluster di Kelantan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainuddin, Najahulfazliah (2014) Unsteady free convection on a horizontal circular cylinder in the presence of heat generation and radiation. Masters thesis, Universiti Tun Hussein Malaysia.

Zainulabidin, Muhd Hafeez and Gorman, D. G. (2014) Axial vibration mode of coupled liquid-structure-gas system in a rigid cylindrical container. International Journal of Mechanical & Mechatronics Engineering, 14 (3). pp. 106-113. ISSN 2227-2771

Zakaria, Hanis and Khalid, Amir and Sies, Mohamad Farid and Mustaffa, Norrizal (2014) Overview effect of biodiesel storage on properties and characteristics. Applied Mechanics and Materials, 465. pp. 260-264. ISSN 1660-9336

Zakaria, Hanis and Khalid, Amir and Sies, Mohamad Farid and Mustaffa, Norrizal and B., Manshoor (2014) Effect of storage temperature and storage duration on biodiesel properties and characteristics. Applied Mechanics and Materials, 465. pp. 316-321. ISSN 1660-9336

Zakaria, Mohd Azuan and Kubota, Tetsu (2014) Environmental design consideration for courtyards in residential buildings in hot-humid climates: A review. International Journal of Built Environment and Sustainability, 1 (1). pp. 45-51. ISSN 1551-1369

Zaman, Izzuddin and Araby, Sherif and Khalid, Amir and Manshoor, Bukhari (2014) Moisture absorption and diffusivity of epoxy filled layered-structure nanocomposite. Advances in Environmental Biology, 8 (8). pp. 2626-2631. ISSN 1995-0756

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites-a survey. Journal of Polymer Research, 21 (NIL). pp. 1-11. ISSN 1022-9760

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites—a survey. Journal of Polymer Research, 21 (5). pp. 1-11. ISSN 1022-9760

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Meng, Qingshi and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Materials Science, 49 (NIL). pp. 5856-5865. ISSN 0022-2461

Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Meng, Qingshi and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Material Science, 49. pp. 5856-5865. ISSN 0022-2461

Zargoun, Ahmed Muftah Ali (2014) Phone virtual environment for RC assistive robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zolkeplee, Muhammad Qhuzaifah (2014) Development of current control for three phase multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkafli, Mohd Fadhli and Omar, Ashraf A. and Asrar, Waqar (2014) Flowfield-dependent variant method for moving-boundary problems. AIAA Journal, 53 (4). pp. 1026-1036. ISSN 1533-385X

Zulkefly, Muhamad Yusuf (2014) Titanium dioxide (TiO2) as buffer layer in organic solar cell device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zuraidi, Siti Nor Fatimah (2014) Model rangka kerja pemuliharaan struktur fabrik bagi bangunan bersejarah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Sun Jun 26 07:10:37 2022 +08.