Items where Year is 2022

A. Malek, Mohd Ahsani and Mohamad Zabidi, Mohamad Irfan (2022) Penyisihan pekerjaan dan kesejahteraan psikologi penghuni penjara. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 128-149.

A. Memon, Abid and Memon, M. Asif and Bhatti, Kaleemullah and Jacob, Kavikumar and Sitthiwirattham, Thanin and Promsakon, Chanon and Khan, Ilyas (2022) Modelling and simulation of fluid flow through a circular cylinder with high reynolds number: a COMSOL multiphysics study. Journal of Mathematics and Statistics, 2022. pp. 1-9. (Unpublished)

A. Mukred, Jameel A. and A. Rahim, Ruzairi and Mohamad, Elmy Johana and Salh, Adeeb and Ashyap, Adel Y. I. and Abdullah, Qazwan and AL-Fadhali, Najib and Al-Ameri, S. and Al-Ashwal, Rania (2022) Vector evaluated particle swarm optimization approach to solve assembly sequence planning problem. Journal of Tomography System & Sensors Application, 5 (1). pp. 1-9. ISSN 2636-9133

A. Ramlee, Leni Salfarina and Rozali, Mohd Zulfadli and Yunus, Faizal Amin Nur (2022) Perkembangan motor kasar murid tahun satu sekolah rendah. ANP JOURNAL OF SOCIAL SCIENCE AND HUMANITIES, 3 (1). pp. 19-23. ISSN 2773-482x

AL-Fadhali, Najib (2022) An AMOS-SEM approach to evaluating stakeholders’ influence on construction project delivery performance. AMOS-SEM, stakeholders and construction PDP. pp. 1-24.

AL-Fadhali, Najib (2022) An AMOS-SEM approach to evaluating stakeholders’ influence on construction project delivery performance. The current issue and full text archive of this journal is available on Emerald Insight at:. pp. 1-24.

Ab Aziz, Ab Wafi and Jalani, Jamaludin and Mohd Rejab, Sujana and Sadun, Amirul Syafiq (2022) Preliminary findings on EEG controlled prosthetic hand for stroke patients based on motor control. In: Control, Instrumentation and Mechatronics: Theory and Practice. Springer, pp. 1-9.

Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2022) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry, 16. ISSN 104387

Ab Ghani, Ahmad RAqib and Abd Malek, Al Insyirah and Wan Mohamad Yusoff, Wan Azfizatul Az Zarah and Md Taujuddin, Nik Shahidah Afifi and Ambak, Kamarudin (2022) Road crashes among food delivery riders (p-hailing) during pandemic in Kuala Lumpur. In: AWAM INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING, AICCE 2022.

Ab Ghani, Ahmad Raqib and Abd Malek, AI Insyirah and Yusoif,, Wan Azizatul Az Zarah and Md Tajuddin, Wan Mohamed and Ambak, Kamarudin (2022) Road crashes among food delivery riders (P-Hailing) during pandemic in Kuala Lumpur. In: AWAM INTERNATIONAL CONFERENCE ON CIVIL ENGINEERING, AICCE 2022.

Ab Ghani, Ahmad Raqib and Abd Malek, Al Insyirah and Wan Mohamed Yusoif, Wan Azfizatul Az Zarah and Md Taujuddin, Nik Shahidah Afifi and Ambak, Kamarudin (2022) Road crashes among food delivery riders (P-Hailing) during pandemic in Kuala Lumpur. In: LECTURE NOTES IN CIVIL ENGINEERING.

Abd Aziz, Azlihan and Masek, Alias and Mohamad, Norsuhaidah (2022) Students’ participation and motivational factors in student-centered learning: a case of two Malaysian Vocational Institutes. Journal of Engineering Education Transformations, 35. pp. 204-210.

Abd Aziz, Sahrir (2022) Urban rail station assessment model for transit oriented development in greater Kuala Lumpur. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamid, Ruhiana Idayu and Tee, Tze Kiong and Abbas @ Ahmad, Lutfiah Natrah and Mohd. Rusly, Noor Syuhaili and Ahmad Puad, Farah Najwa (2022) Enhancing grammar competence of vocational school students through the omygram learning chart. Studies in English Language and Education, 9 (2). pp. 685-704. ISSN 2355-2794

Abd Rahman, Muhammad Faqhrurrazi (2022) The improvement of pressurized metered-dose inhaler and spacers for treating respiratory diseases. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Razak, Nur Syazanna Iryani and Balasbaneh, Ali Tighnavard (2022) Perception of green roof and flat roof development in high rise buildings in Malaysia: pros and cons. Recent Trends in Civil Engineering and Built Environment, 3 (1). 023-032.

Abd Wahab, Norhayati and Adnan, Suraya Hani and Ibrahi, Abdul Hadi Izaan (2022) Physical properties of sago fine waste as a fine aggregate in material of construction. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 11-18. ISBN 978-967-2817-40-6

Abd. Kadir, Aslila (2022) The potential use of light pipe system as illumination element for one storey building in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdalhadi, Abdualrhman and Wahid, Herman and Burhanuddin, Dirman Hanafi (2022) An optimal proportional integral derivative tuning for a magnetic levitation system using metamodeling approach. Indonesian Journal of Electrical Engineering and Computer Science, 25 (3). pp. 1356-1366. ISSN 2502-4752

Abdelrahman Suliman, Hussameldin Mohamed (2022) Design of a stand-alone PV system using PVSYST software for KKTF Residential Collage, UTHM Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Abdirahman Ali, Fadumo (2022) Marx topology dc-dc buck converter for high voltage gain achievement. Masters thesis, Universiti Tun Hussein Malaysia.

Abdol Rahman, Mohd Nasrull and Samin, Nor Laila Hanum (2022) Risk assessment of Occupational Safety & Heath (OSH) hazards at small and medium enterprise (SME). In: Research Progress in Mechanical and Manufacturing Engineering.

Abdul Aziz, Nor Izzah (2022) Development of groundwater filtration system using multiseries media. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Ghani, Ahmad Faiz Hilmi and Poad, Mhd Hazwaj and Abu Bakar, Afarulrazi and Norazman, Siti Nuraini (2022) Power losses analysis of multiphase DC-DC buck converter using OrCAD PSpice software. Bulletin of Electrical Engineering and Informatics, 11 (3). pp. 1723-1734. ISSN 2302-9285

Abdul Halim, Siti Fatimah and Zakaria, Zulkarnay and Pusppanathan, Jaysuman and Mohd Noor, Anas and Norali, Ahmad Nasrul and Rahiman, Mohd Hafiz Fazalul and Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Engku-Husna, Engku Ismail and Ali Hassan, Muhamad Khairul and Safar, Muhammad Juhairi Aziz and Salleh, Ahmad Faizal and Mat Som, Mohd Hanafi (2022) A review on magnetic induction spectroscopy potential for fetal acidosis examination. National Library of Medicine, 22 (4).

Abdul Hamid, Intan Sue Liana and Beh, Khi Khim and Mohamed Omar, Mohammad Faiz and Mohamad Zain, Khairu Anuar and Abd Rhaffor, Nuha and Hamid, Sofiyah Sal and Abd Manaf, Asrulnizam (2022) Three-dimensional soft material micropatterning via grayscale photolithography for improved hydrophobicity of Polydimethylsiloxane (PDMS). Micromachines, 13 (78). pp. 1-13. ISSN 2072-666X

Abdul Hamid, Suhaila (2022) Development of occupational safety and health (OSH) performance management framework for industries in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Kadir, Masidayu and Mokhatar, Shahrul Niza and Abd Mutalib, Nur Anis Najwa (2022) Energy absorption of modified rubberized concrete block under low velocity impact loads. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 420-426.

Abdul Kadir, Muhammad Azraie (2022) Optimization of flood inundation simulation using multi-resolution Digital elevation model. Doctoral thesis, Universiti Sains Malaysia.

Abdul Kadir, Zahuren (2022) The correlation between motivation and english language achievement among upper secondary school pupils. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Khalim, Mustapahayuddin and Adzimat, Afiqah Nabilah and Zainol, Nur Zainatul Nadra and Mohammad, Che Adenan (2022) Sorotan perlaksanaan wakaf di Malaysia & manfaatnya kepada pembangunan ummah. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 104-110. ISBN 978-967-2817-72-7

Abdul Khaliq, Nor Aizatul Nabila and Ramli, Muhammad Faiz (2022) Obstacle detection for Unmanned Aerial Vehicle (UAV). PROGRESS IN AEROSPACE AND AVIATION TECHNOLOGY, 2 (1). pp. 53-64.

Abdul Latif, Amirul Faiz and Loh, Siew Yee and Muhamad, Mimi Suliza and Lee, Te Chuan and Basri, Hatijah (2022) Natural adsorbent made from eggshells for removal of chromium (VI) in water. Biointerface Research in Applied Chemistry, 12 (1). pp. 518-528.

Abdul Manaf, Adib Fikri (2022) Evaluation of polyethylene terephthalate in concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Manaf, Shoriya Aruni (2022) Cell immobilization of recombinant kluyveromyces lactis on carbon nanomaterial for the improvement of xylanase production. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Manap, Muhamad Zariq Imran (2022) Development of solar photovoltaic (PV) temperature control system for mushroom house. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Mutalib, Siti Salwa (2022) Kerangka amalan terbaik penyampaian perkhidmatan pelanggan dalam kalangan pengusaha homestay di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Ismail and Azis, Noorul Azreen and Mahmood, Salwa and Mohd Rohani, Jafri and Zaidi, Nor Amira Farhana and Mohd Sukri, Suhaimi and Mohd Zain, Mohd Arif Afzan (2022) Development of a survey instrument for measuring workers satisfaction on usability of manual handling equipments at the warehouse: a pilot study. In: Human-Centered Technology for a Better Tomorrow, 22 FEBRUARY 2021, KL.

Abdul Rahman, Ismail and Azis, Noorul Azreen and Mahmood, Salwa and Mohd Rohani, Jafri and Zaidi, Nor Amira Farhana and Mohd Sukri, Suhaimi and Mohd Zain, Mohd Arif Afzan (2022) The evaluation of workers satisfaction on usability of manual handling equipment among warehouse workers in Malaysia. In: Usability and User Experience,.

Abdul Salim, Nur Atikah and Fulazzaky, Mohamad Ali and Puteh, Mohd Hafz and Khamidun, Mohd Hairul and Mohd Yusof ·, Abdull Rahim and Abdullah, Noorul Hudai and Fulazzaky, Mohammad and Zaini, Muhammad Abbas Ahmad (2022) Mass transfer kinetics and mechanisms of phosphate adsorbed on waste mussel shell. Water Air Soil Pollution. pp. 1-22. ISSN 1573-2932

Abdul Samad, M. S. and Mohd Nor, M. K. (2022) A comparative analysis between a newly Malaysian size ATD and the current Hybrid III ATD in frontal impact. BIOMEDICAL ENGINEERING. pp. 1-13.

Abdul Samad, M. S. and Mohd Nor, M. K. and Abdul Majid, M. M. and Abu Kassim, K. K. (2022) Optimization of vehicle pulse index parameters based on validated vehicleoccupant finite element model. INTERNATIONAL JOURNAL OF CRASHWORTHINESS. pp. 1-8.

Abdul Sani, Amiril Sahab and Zamri, Zubaidah and Megat Ahmad Radzi, Puteri Humairah and Sabri, Ainaa Mardhiah and Talib, Norfazillah (2022) Modified Tamanu Plant-Based Oil From Pahang Malaysia as Biodegradable Metalworking Fluids. Materials Today: Proceedings. pp. 1-7. ISSN 2214-7853

Abdul Wahab, Muhammad Hafiz Mohamad and Abdul Rahim, Ruzairi and Abdul Shaib, Mohd.Fadzli and Ishak, Mohamad Hafis Izran and Mohamed Ali, Mohamed Sultan and Wahid, Herman and Abas, Khairul Hamimah and Jamaluddin, Juliza and Tee, Kian Sek (2022) Tire pressure monitoring system. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 105-118. ISBN 978-967-2817-62-8

Abdul-Al, Mohamed and I. Amar, Ahmed S. and Elfergani, Issa and Littlehales, Richard and Parchin, Naser Ojaroudi and Al-Yasir, Yasir and Chan, Hwang See and Zhou, Dawei and Zainal Abidin, Zuhairiah and Alibakhshikenari, Mohammad and Zebiri, Chemseddine and Elmegri, Fauzi and Abusitta, Musa and Ullah, Atta and Abdussalam, Fathi M. A. and Rodriguez, Jonathan and McEwan, Neil J. and Noras, James and Hodgetts, Russell and Abd-Alhameed, Raed A. (2022) Wireless electromagnetic radiation assessment based on the Specific Absorption Rate (SAR): a review case study. Electronics, 11 (511). pp. 2-31.

Abdulkareem, Ali Nasr and Nasir, Nurul Fitriah (2022) Biodiesel production from canola oil using TiO2CaO as a heterogenous catalyst. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 93 (2). pp. 125-137. ISSN 2811-3950

Abdullah, Abdullah Ibrahim (2022) Design of a hybrid haptic wearable device for upper limb amputees to recover the missing sensation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Iqbal Shahridzuan (2022) Investigation of synthethic diesel fuels and combustion characteristics using rapid compression machine (RCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah @ Mohd. Nor, Hilwa and Talib, Nor ‘Aina Fariha (2022) Stigma dan penerimaan masyarakat terhadap pesakit mental dan cara berhadapan dengan isu penyakit mental. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 24-43.

Abdullah Al Nasser, Munef Hasan (2022) Face recognition employees attendance system. Masters thesis, Universiti Tun Hussein Malaysia.

Abdullah Aqlan, Ahmed Abdulbaset (2022) Antenna design for solid material characterization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulmaged, Alyaa Idrees and Fhong Soon, Chin and A. Talip, Balkis and Ahmad Zamhuri, Siti Adibah and A. Mostafa, Salama and Zhou, Wenbin (2022) Characterization of alginate–gelatin–cholesteryl ester liquid crystals bioinks for extrusion bioprinting of tissue engineering scaffolds. Polymers, 14 (1021). pp. 1-30. ISSN 2073-4360

Abdulmaged Al-Flayyih, Alyaa Idrees (2022) Synthesis and characterization of a potential alginate-gelatin-cholesteryl ester liquid crystals bioink for tissue engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulrahman Ahmed Ghaleb Amer, Abdulrahman Ahmed Ghaleb Amer and Sapuan, Syarfa Zahirah and Adel Y. I. Ashyap, Adel Y. I. Ashyap (2022) Efficient metasurface for electromagnetic energy harvesting with high capture efficiency and a wide range of incident angles. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-18.

Abdulrahman Alhammadi, Eman Mohammed (2022) An assessment model based on the role of knowledge management factors in project management performance of business organisations in the UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulsalam, Najdat Hameed (2022) A framework of tqm and organizational performance with ISO 9001 and innovation as mediators in Iraqi Manufacturing Companies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abidi, Muhammad Adib (2022) Optimization of operating parameters in microbial consortium (AB-101) preparation and application in palm oil mill effluent (POME) primary treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abo Mosali, Najmaddin and Shamsudin, Syariful Syafiq and Alfandi, Omar and Omar, Rosli and AL-Fadhali, Najib (2022) Twin delayed deep deterministic policy gradient-based target tracking for unmanned aerial vehicle with achievement rewarding and multistage training. IEEE Access, 10. pp. 23545-23559. ISSN 2169-3536

Abu Hashim, Nur Athirah and Wan Zawawi, Wan Nursyahirah and Othman, Siti Amira and Mohammed, Elizah (2022) The uses of hematopoietic stem cell transplantation to restore the production of blood cells in cancer treatment. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 103-117.

Abubakar Saleh, Umar (2022) Development and characterization of sandwich hybrid photovoltaic-thermoelectric generator using shingle as a thermal buffer for efficiency improvement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Adam, Daud (2022) Inter-rater reliability of the assessor hazard rating assessment for chemical hazardous to health in Malaysia (Klang Valley). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adan, Fuad Hassan (2022) 1 x 4 array antenna for wireless local area network (WLAN). Masters thesis, Universiti Tun Hussein Malaysia.

Adi, Nazir and Mohamad, Arifha and Wan Yusoff, Wan Fauziah (2022) Does board behaviour matter for board effectiveness in Small and Medium Industries (SMEs)?: a preliminary observation. Malaysian Journal of Social Sciences and Humanities, 7 (2). pp. 1-8. ISSN 2504-8562

Adnan, Nurul Afizah (2022) Set kompetensi kerja bagi Program Kejuruteraan Mekanikal Politeknik Malaysia ke arah revolusi perindustrian 4.0 (4IR). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Afsheen, Saima (2022) The nexus between mortgage financing and economic growth in Malaysia: a comparative analysis of Islamic and conventional banks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Afsheen, Saima (2022) The nexus between mortgage financing and economic growth in Malaysia: a comparative analysis of islamic and conventional banks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Baharin (2022) Penjerap komposit “lignoselulosa-karbon teraktif (buah semarak api)” dan kaolin dalam rawatan air sisa getah asli mentah. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Fatin Nor (2022) Characterization and analysis of pentacene and oxide thin films for an organic-inorganic heterojunction diode photodetector application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Maimunah (2022) Modul kit smart berintegrasikan elemen pembelajaran dan pengajaran abad ke-21 ke arah Peningkatan Kemahiran Bahasa Melayu Sekolah Rendah. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Noor Azizah and Ibrahim, Nabisah (2022) Isu marginalisasi dan program peningkatan kesejahteraan ibu tunggal. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 71-88.

Ahmad, Nor Azezee (2022) Buletin UTHM Bil. 1 Januari 2022. [Bulletin]

Ahmad, Nor Azezee (2022) Buletin UTHM Bil..2 Februari 2022. [Bulletin]

Ahmad, Siti Zu Nurain and Wan Salleh, Wan Norharyati and Yusof, Norhaniza and Mohd Yusop, Mohd Zamri and Hamdan, Rafidah and Ismail, Ahmad Fauzi (2022) Synthesis of zeolitic imidazolate framework-8 (ZIF-8) using different solvents for 2 lead and cadmium adsorption. -. pp. 1-32.

Ahmad Azraai, Munirah and Rani, Ridhwan and Qibtiah, Raja Mariatul and Samian, Hidayah (2022) Face mask wear detection by using facial recognition system for entrance authorization. (IJACSA) International Journal of Advanced Computer Science and Applications, 13 (6). pp. 117-123. ISSN 2156-5570

Ahmad Effendi, Farah Adibah and Harun, Amran and Farradia, Yuary and Abdul Rashid, Umi Kartini and Abu Seman, Noor Aslinda and Hasim, Muhammad Asyraf (2022) Covid-19 and its impact on digital marketing. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 1-11. ISBN 978-967-2817-57-4

Ahmad Latiffi, Nur Atikah and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Tajuddin, R. M. and Al-Shaibani, Muhanna M. and N. Vo, Dai-Viet and Rupani, Parveen Fatemeh (2022) Nutrients elimination from meat processing wastewater using Scenedesmus sp.; optimizations; artificial neural network and kinetics models. Environmental Technology & Innovation, 26. pp. 1-11. ISSN 2352-1864

Ahmad Zabidi, Nurul Afiqah and Zakariah, Siti Hajar and Abdul Rahman, Khairul Anuar and Ahmad, Nor Aziah and Tukiran, Nor Anis Intan Aqiah and Syawal Ismail, Lisa Mariam1 (2022) Factors of positive emotion among catering students at UTHM during COVID-19 pandemic. Journal of Technology and Humanities, 3 (2). pp. 1-5. ISSN 2710-6357

Ahmad Zubir, Raudhah Adibah (2022) Kerangka kemahiran kebolehpasaran dalam pekerjaan berasaskan projek berdasarkan keperluan industri di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Abo Mosali, Najm Addin Mohammed (2022) Reinforcement learning-based target tracking for unmanned aerial vehicle with achievement rewarding and multistage traning. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Alqourabah, Eissa Abdulsalam (2022) AES encryption of resource allocation for ultra-reliable and enhanced mobile broadband IoT applications in fog network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Dheyab, Saad and Mohammed Abdulameer, Shaymaa and Mostafa, Salama A (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

Ahmed Ghaleb Amer, Abdulrahman (2022) Metasurface collectors for ambient RF energy harvesting applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Ghaleb Amer, Abdulrahman and Sapuan, Syarfa Zahirah and Ashyap, Adel Y. (2022) Efficient metasurface for electromagnetic energy harvesting with high capture efficiency and a wide range of incident angles. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-13.

Ahmed Ghaleb Amer, Abdulrahman and Sapuan, Syarfa Zahirah and Ashyap, Adel Y. I. (2022) Efficient metasurface for electromagnetic energy harvesting with high capture efficiency and a wide range of incident angles. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-13.

Ahmed Harouache, Ahmed Harouache (2022) The mediation of green supply chain management towards sustainable construction in Algeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Jubair, Mohammed and Mostafa, Salama A. and Mustapha, Aida and Salamat, Mohamad Aizi and Hamid Hassan, Mustafa and Mohammed, Mazin Abed and AL-Dhief, Fahad Taha (2022) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. IET Communications. pp. 1-17.

Ahmed Khalifa Alsuwaidi, Anoud Mohammed (2022) Innovation capabilities, organisational culture, and organisational performance in the UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Marey Alhammadi, Ahmed Salem (2022) Modeling the factors causing cost overrun in UAE construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Rid, Zaryab and Raza Shah, Syed Naveed and Memon, Muhammad Jafar and Jhatial, Ashfaque Ahmed and Keerio, Manthar Ali and Wan, Inn Goh (2022) Evaluation of combined utilization of marble dust powder and fly ash on the properties and sustainability of high‑strength concrete. Environmental Science and Pollution Research, 29. pp. 28005-28019.

Aidil, Siti Balqish and Masek, Alias (2022) IoT-based occupancy display system in office. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ainuddin, Ainun Rahmahwati and Mohd Ismail, Siti Sarah and Kamdi, Zakiah and Hussin, Rosniza and Ibrahim, Siti Aida (2022) Growth of nanostructured zinc oxide on flexible conductive substrate: a review. Trans Tech Publications Ltd, Switzerland.

Akbar, Fazal (2022) The impact of entrepreneurial Orientation and firm performance: Mediating role of open innovation, Study of furniture manufacturing companies in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al Ali, Rashid Ali (2022) The impact of training evaluation on Employee productivity: the mediation role of Job performance in public organizations in UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al Kaabi, Ahmed Khalfan Rashed (2022) The mediating role of national culture on the relationship between corporate governance practices and corporate strategy effectiveness. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al Naqbi, Saeed and Md Yassin, Azlina (2022) Attributes of mobile technology adoption acceptance from users perspective. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 220-232. ISSN 2180-3242

Al Naqbi, Saeed and Md Yassin, Azlina (2022) Modelling the factors measuring customer service excellence for mobile application technology usage in Abu Dhabi. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 51-67. ISSN 2180-3242

Al-Alim, Sami. and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusu, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Sai, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9. ISSN 3381–3389

Al-Alimi, A. W. and Khaleel, W. A. and Sadeq, S. A. and Cholan, N. A. and Al-Mansoori, M. H. and M. Ahmed, M. H. and Mahdi, M.A. (2022) Switchable single-double frequency multi-wavelength Brillouin Raman fiber laser based on micro-air cavity misalignment. Optics and Laser Technology, 146. pp. 1-10. ISSN 0030-3992

Al-Alimi, A.W. and Mohd Yusoff, N. and Cholan, N. A. and Alresheedi, M. T. and Abas, A. F. and Talib, Z. A. and Mahdi, M. A. (2022) Q-switched fiber laser employing a passive polarization-maintaining thulium-doped fiber as a saturable absorber. Results in Physics, 33. pp. 1-8. ISSN 2211-3797

Al-Alimi, Sami and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Alimi, Sami and Lajis, Mohd. Amri. and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Al-Buriahi, Abdullah Khaled and M. Al-shaibani, Muhanna and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel Ali and Sharma, Ajit and Ismail, Norli (2022) Ciprofloxacin removal from non-clinical environment: A critical review of current methods and future trend prospects. Journal of Water Process Engineering, 47. pp. 1-20. ISSN 2214-7144

Al-Maqtari, Qais Ali and Al-Gheethi, Adel Ali Saeed and Ghaleb, Abduljalil D.S. and Mahdi, Amer Ali and Al-Ansi, Waleed and Noman, Abeer Essam and Al-Adeeb, Abdulqader and Olatound´e Odjo, Aboudou Kabirou and Du, Yuhang and Wei, Minping and Yao, Weirong (2022) Fabrication and characterization of chitosan/gelatin films loaded with microcapsules of pulicaria jaubertii extract. Food Hydrocolloids, 129. pp. 1-15. ISSN 0268-005X

Al-Nasrawi, Jaafar Abdul Abbas Abbood (2022) Nanoparticle shapes boundary layer flow in nanofluid and their effects on heat transfer. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al-Qaisi, Mohammed Murad (2022) Factors affecting the implementation of occupational safety and health management system (OSHMS) in Malaysia petrochemical industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al-Qaysi, Ali Abdulqader Mustafa (2022) Enhancing the cooling system of a residential building using integrated building information modelling with solar absorption system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al-Rahmi, Ali Mugahed and Shamsuddin, Alina and Wahab, Eta and Al-Rahmi, Waleed Mugahed and Alturki, Uthman and Aldraiweesh, Ahmed and Almutairy, Sultan (2022) Integrated the role of UTAUT and TTF model to evaluate social media use for teaching and learning in higher education. Social Media Use for Teaching and Learning in Higher Education, 10. pp. 1-13.

Al-Ttowi, Abobakr and Didane, Djamal Hissein and Abdullah, Mohammad Kamil and Manshoor, Bukhari (2022) Wind and solar resources assessment techniques for wind-solar map development in Jeddah, Saudi Arabia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (1). pp. 11-24.

Al-Zubairy, Maysoon Abdulrahman and Hussein, Khaled and H. Alkhyat, Salwa and Al-Mahdi, Abdullah Yahya and Alghalibi, Saeed Munassar and Al-Gheethi, Adel Ali Saeed and Al-Shaibani, Muhanna Mohammed and El Enshasy, Hesham Ali and Sidik, Nik Marzuki (2022) Antibacterial activity of a novel oligosaccharide from streptomyces californics against erwinia carotovora subsp. carotovora. Molecules, 27 (2384). pp. 1-17.

Alakbaree, Maysaa and Amran, Sayazwani and Mohd Shamsir, Mohd Shamsir and H. Ahmed, Haron and Hamza, Muaawia and Alonazi, Mona and Warsy, Arjumand and Ab Latif, Nurriza (2022) Human G6PD variant structural studies: Elucidating the molecular basis of human G6PD deficiency. Gene Reports, 27. pp. 1-10.

Ali, Azita and Pat, Siew Chien (2022) Development of 3D animated video application for computer evolution. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ali Al Khazraji, Duha Hashim (2022) The effect of transformational leadership on small and medium enterprises performance of UAE: the mediation roles of employee creativity and organization innovation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Alnaqbi, Ali Mohamed (2022) Acceptance of e-learning using artificial intelligence technology in military education process in UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Jafar Al Ansaari, Omar Ibrahim (2022) The mediating effect of the employee commitment on the relationship between recruitment process and organizational performance in UAE organisations. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Tighnavard Balasbaneh, Ali Tighnavard Balasbaneh and Willy Sher, Willy Sher (2022) Economic and environmental life cycle assessment of alternative mass timber walls to evaluate circular economy in building: MCDM method. Environment, Development and Sustainability. pp. 1-30.

Ali Tighnavard Balasbaneh, Ali Tighnavard Balasbaneh and Willy Sher, Willy Sher and David Yeoh, David Yeoh and Yasin, Mohd Norazam (2022) Economic and environmental life cycle perspectives on two engineered wood products: comparison of LVL and GLT construction materials. Environmental Science and Pollution Research. pp. 1-18.

Alipal, Janifal (2022) In vitro bioactivity of novel chitosan/gelatin/halloysite nanostructured coatings on anodised titanium via electrophoresation for bone implant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Allah, Mohammad Zaraa and Hariri, Azian and Mohamed Kamar, Haslinda (2022) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 45-58. ISSN 2289-7879

Alnaqbi, Sami Saeed Obaid and Omar, Siti Sarah (2022) A review of the smart educational system and students' performance through teachers' efficiency in the United Arab Emirate. Journal of Positive School Psychology, 6 (3). pp. 4807-4816.

Alshaeer, Honin Ali Yahya and Irwan, J. M. and Alshalif, Abdullah Faisal and Al-Fakih, Amin and Ewais, Dina Yehia Zakaria and Salmi, Abdelatif and Alhokabi, Abdulmajeed Ali (2022) Review on carbonation study of reinforcement concrete incorporating with bacteria as self-healing approach. Materials, 15. pp. 1-17.

Alshalif, Abdullah Faisal and M. Irwan, J. and Othman, N. and Al-Gheethi, A. A. and Shamsudin, S. (2022) A systematic review on bio-sequestration of carbon dioxide in bio-concrete systems: a future direction. EUROPEAN JOURNAL OF ENVIRONMENTAL AND CIVIL ENGINEERING, 26 (3). pp. 1209-1228.

Amin, Aizan Sofia (2022) Penyisihan sosial terhadap orang kurang upaya. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 11-23.

Amri,, Muhammad Akmal and Zainudin, Muhammad Haziq and Razali, Nor Faizah and Mohd Fauzi, Noor Akhmazillah (2022) Milk protein hydrolysates: improved biotechnology from conventional Dairy Milk. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 15-28.

Ang, Chuen Yuen (2022) Real driving emissions tests of a light truck operating using a Euro-IV compliant CI engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ang Soon Ern, Peniel and Jong, Oi Ka and Safea’ai, Muhammad Aqerul and Mohd Saip, Muhammad Amirul Rasyid and Mohamed Salehin, Nur Ili Izyan (2022) AI vs. human mind: efficiency in the management of construction industry. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 34-40. ISBN 978-967-2817-40-6

Anpalagan, Ranjhini (2022) Investigation on mechanical properties of cockle shell composite structure under temperature and aging influence. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Anting, Nickholas (2022) Data science with KNIME. NASPSOFT Intelligence Academy. ISBN 978-629-96941-0-6

Anuar, Nur Danisyah and Rahmat, Siti Nazahiyah (2022) Climate change assessment on flood occurrence in Kota Tinggi, Johor. Journal of Advancement in Environmental Solution and Resource Recovery, 2 (1). pp. 60-70.

Anuar, Nurasiah Mira (2022) A parametric study of dredged marine soils as passive geosorbent for escherichia coli removal in leachate. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Anwar, Khairunnisa and Mohamad, Mimi Mohaffyza (2022) TVET teaching implementation: competency, challenges and motivation. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Arbain, Siti Hajar (2022) Multifunctional optimized group method data handling for software effort estimation. Doctoral thesis, Universiti Teknologi Malaysia.

Arham Bajuri, Muhammad Nur and Didane, Djamal Hissein and Boukhari, Mahamat Issa and Manshoor, Bukhari (2022) Computational Fluid Dynamics (CFD) analysis of different sizes of savonius rotor wind turbine. Journal of Advanced Research in Applied Mechanics, 94 (1). pp. 7-12.

Aridi, Aida Safina (2022) Isolation of nanocrystalline cellulose from leucaena leucocephala pods and its application as a fat replacer in production of low-fat mayonnaise. Doctoral thesis, Universiti Putra Malaysia.

Arifutzzaman, A. and Chin, Fhong Soon and Morsin, Marlia and Gim, Pao Lim and Aslfattahi, Navid and Mat Jubadi, Warsuzarina and Sangu, Sangeetha Siva and Mohamed Saheed, Mohamed Shuaib and Nayan, Nafarizal and Saidur, R. (2022) MXene as emerging low dimensional material in modern energy and bio application: a review. Journal of Nano Research, 74. pp. 109-154. ISSN 1661-9897

Asgher, Hafiz Maaz (2022) An improved grey wolf with whale algorithm for optimization functions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asmuin, Norzelawati and Pairan, M. Rasidi and Mat Isa, Norasikin and Sies, Farid (2022) Study the velocity and pressure exerted in front of the filter surface in the kitchen hood system by using ANSYS. In: 7th International Conference on Mechanical and Manufacturing Engineering.

Awang @ Muhammad, Nor Suhaida (2022) Penglibatan pelajar dan persekitaran institusi dalam aktiviti keusahawanan sosial dan kesannya terhadap modal insan dan modal sosial. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ayob, Nuramanina and Khamidun, Mohd Hairul (2022) Assessment of surface water quality using Malaysia Water Quality Index (MWQI) and National Sanitation Foundation Water Quality Index (NSFWQI) during road construction activities. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 381-388.

Ayokunmi, Lawal Abideen (2022) The role of social media marketing on e-commerce implementation and SMEs performance in Ibadan City Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ayokunmi, Lawal Abideen and Abu Seman, Noor Aslinda and Rashid, Umi Kartini (2022) The relationship between social media marketing and SMEs performance in Nigeria: a systemic literature review. Journal of Positive School Psychology, 6 (3). pp. 8665-8673.

Ayub, Afiq Azim (2022) Augmented reality application to improve remedial student’s learning performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azahar, Mohamad Amirur Rahman and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Mohd Zamani Ngali, Ishkrizat Taib and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2022) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 1-12. ISSN 2180-1363

Azahar, Mohamad Amirur Rahman and Darlis, Nofrizalidris and Hassan, Norhafizzah and Mohd Salleh, Zuliazura and Saiful Azam, Syafiqah Ruqaiyah and Taib, Ishkrizat and Ngali, Mohd Zamani and Mustaffa, Khairul Nizam and Hashim, Muhamad Mohshein (2022) CFD Analysis on Different Filling Volume Capacity and Fluid Density for Flexitank Application. CFD Letters, 15 (1). pp. 1-12.

Azid, N. and Busthami Nur, A. H. and Md-Ali, R. and Kiong, T. T. (2022) Stop bullying! Does gender influence bullying and bully victims? International Scientific Electronic Journal, 55 (1). pp. 345-357. ISSN 2307-2334

Azmi, Nur Iwani (2022) Pelaksanaan pendidikan berasaskan keterampilan (Competency Based Education) dalam Program Pendidikan Asas Vokasional (PAV) : satu kajian kes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Rasyad and Yazid, Faris and Mahmud, Nizamullah and Hassan, Faradillah and Azhar, Azrini and Salimin, Suriana (2022) Modelling of micro hydropower system for small load application. Journal of Electronic Voltage and Application, 3 (1). pp. 125-132.

B

B. Ajaj, Wisam and Amhmad Borhana Omran, Abdoulhdi and M. Elfaghi, Abdulhafid (2022) Mathematical models for temperature distribution in oil wells. Journal of Engineering Science and Technology, 17 (2). pp. 923-935. ISSN 1823-4690

B. Odili, Julius and B. Nasser, Abdullah and A., Noraziah and Abd Wahab, Mohd Helmy and Ahmed, Mashuk (2022) African buffalo optimization algorithm based t-way test suite generation strategy for electronic-payment transactions. In: ICETIS 2021, June 25-26, 2021, Onine.

Badrol Hisham, Mohamad Aizol Faiz and Khamidun, Mohd Hairul and Ridzuan, Mohd Baharudin (2022) Kajian tentang pemilihan bahan penjerap semulajadi untuk menyingkirkan bahan pencemar (COD) daripada air kelabu. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1430-1438.

Bagchi, Susama (2022) Digimammocad: a new deep learning-based cad system for mammogram breast cancer diagnosis with mass identification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Bahar, Nurhidayah and Subaramaniam, Kasthuri and Masoud, Adnan and Shibghatullah, Abdul Samad and Abd Wahab, Mohd Helmy (2022) Investigation on the functional requirements for talent management system – a case of performing arts freelancers in Malaysia. In: Proceedings of the 11th International Conference on Robotics, Vision, Signal Processing and Power Applications. Springer, pp. 963-972.

Bahrin, Muhammad Harith and Abdul Rahim, Ruzairi and Tee, Kian Sek and Abdul Manaf, Mohamad Shukri and Wahap, Ahmad Ridhwan and Mohamed Din, Shahrulnizahani and Ahmad, Nasarudin and Mohd Nayan, Norkharziana and Mohd Zain, Rasif and Pusppanathan, Jaysuman (2022) Smart home security system. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 77-88. ISBN 978-967-2817-62-8

Bahrom, Mohd Zaki and Manshoor, Bukhari and Zaman, Izzuddin and Didane, Djamal Hissein and Ng, Wei Hang and Sayed Abdelaal, Muhammed Abdelfattah and Nizam Ibrahim, Mohd Nizam (2022) Numerical analysis of tribological characteristics for textured piston ring-liners in mixed lubrication with a non-circular cylinder bore. Journal of Complex Flow, 4 (2). pp. 26-32. ISSN 2672-7374

Bakhuraisa, Yaser and Abd Aziz, Azlan and Tan, Kim Geok and Jamian, Saifulnizan and Mustakim, Fajaruddin (2022) A survey of ranging techniques for vehicle localization in intelligence transportation system: challenges and opportunities. International Journal of Electrical and Computer Engineering (IJECE), 12 (6). pp. 6248-6260. ISSN 2088-8708

Bakri, Anis Suhaili (2022) Mitigation of oxygen presence in AlN (100) & (002) growth using RF magnetron sputtering. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Balasbaneh, Ali Tighnavard and Sher, Willy and Yeoh, David (2022) Recommending a new building structure to alleviate environmental impact in tropical climates: increasing the use of wood in construction. The International Journal of Life Cycle Assessment. pp. 885-901.

Bano, Yasmeen and Omar, Siti Sarah and Ismail, Fadillha (2022) The relationship between succession planning practices and employee retention in public Hlis Malaysia. Journal of Positive School Psychology, 6 (6). pp. 2540-2553.

Besar, Norashibah (2022) Gagasan negara zikir negara Brunei Darussalam: kejayaan dan cabaran. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 13-28. ISBN 978-967-2817-72-7

Buhari, Rosnawati (2022) The performance of warm mix asphalt incorporating asphalt binder improved with amine nano-tio2 additives. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Burhannuddin, Dirman Hanafi and Mazlan, Sulaiman and Abdul Rahman, Hisyam and Abdul Rahim, Ruzairi (2022) Wet diaper detection and notification device to alert the baby caretaker. ASEAN Engineering Journal, 12 (1). pp. 69-74.

C

Cao, Yan and Mansir, Ibrahim and Mouldi, Abir and Alsharif, Sameer and A. Aly, Ayman and Jarad, Fahd and Batcha, M. F. M. and Bouallegue, B. (2022) Sustainability and financial assessments and double-criteria optimization of a novel power/hydrogen coproduction scheme using solar power and compressed air energy storage cycle. Journal of Energy Storage, 52.

Chan, Jia Xin and Fatt Wong, Joon and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Chee Ching, Yern and Yunos, Muhamad Zaini and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polimer, 53463. pp. 1-17.

Chan, Jia Xin and Wong, Joon Fatt and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirmal, Umar and Hashim, Shahrir and Chee Ching, Yern and Yunos, Muhamad Zaini and Yahaya, Ridwan and U. Gunathilake, T. M. Sampath (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Journal Of Applied Polymer Sciene. pp. 1-17.

Che Din, Nazli and Mistar, Noor Aini and Sulaiman, Raha and Abdullah, Zunaibi and Yahya, Musli Nizam and Haron, Zaiton (2022) Conceptual framework on noise ranking classification in eatery places for human psycho-acoustics preferences towards acoustic comfort. In: ICONBUILD & RCCE 2019, 20 – 22 AUGUST 2019, ADYA HOTEL, LANGKAWI, MALAYSIA.

Che Ibrahim, Che Intan Hartini and Abdullah, Aslam and Razali, Mohd. Azahari (2022) Flow topology around low reynolds number eppler airfoils with vortex shedding. ARPN Journal of Engineering and Applied Sciences, 17 (1). pp. 126-138. ISSN 1819-6608

Che Mohd Nasir, Norruzeyati and Kamaluddin, Mohammad Rahim and Jasni, Mohd Alif (2022) Penglibatan wanita dalam pekerjaan seks: faktor risiko dan marginalisasi sosial. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 192-225.

Chieng, Hock Hung (2022) An efficient semi-sigmoidal non-linear activation function approach for deep neural networks. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chin Vui Sheng, Desmond Daniel and Yahya, Musli Nizam and Che Din, Nazli (2022) Sound absorption of microperforated panel made from coconut fiber and polylactic acid composite. Journal of Natural Fibers, 19 (7). pp. 2719-2729. ISSN 1544-046X

Chong, Yee Hau and Mokhatar, Shahrul Niza and Budiea, Ahmed Mokhtar Albshir (2022) Evaluation of acid attack on concrete containing spent garnet as partial sand replacement. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1386-1398.

Chu, Yi Ching and Abu Seman, Noor Aslinda and Harun, Amran (2022) Consumer behavior during the pandemic Covid 19. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 59-73. ISBN 978-967-2817-57-4

Chua, Wee Heng (2022) An optimum design of a two-stage operational amplifier using carbon nanotube field-effect transistor at 10 nm technology node. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Debnath, Sanjoy Kumar (2022) Energy efficient path-planning for unmanned aerial vehicle. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Dele-Afolabi, T. T. and M. A., Azmah Hanim and K., Vidyatharran and K. A., Matori and O., Saliza Azlina and R., Calin (2022) Interfacial microstructure evolution and shear strength of MWCNTs-reinforced Sn-1.0Ag-0.5Cu (SAC105) composite solder interconnects on plain Cu and ENIAg surface finish. Journal of Materials Science: Materials in Electronics volume, 33. ISSN 8233–8246

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3).

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama A (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

Dheyab, Saad Ahmed and Mohammed Abdulameer, Shaymaa and Mostafa, Salama A. (2022) Efficient Machine Learning Model for DDoS Detection System Based on Dimensionality Reduction. Acta Informatica Pragensia, 11 (3). pp. 1-13.

Didane, Djamal Hissein and Bajuri, Muhammad Nur Arham and Boukhari, Mahamat Issa and Manshoor, Bukhari (2022) Performance investigation of vertical axis wind turbine with savonius rotor using Computational Fluid Dynamics (CFD). CFD Letters, 14 (8). pp. 116-124.

Dihom, Hussin Ramadan and Al-Shaibani, Muhanna M. and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel Ali and Ajit Sharma, Ajit Sharma and Khamidun, Mohd Hairul (2022) Photocatalytic degradation of disperse azo dyes in textile wastewater using green zinc oxide nanoparticles synthesized in plant extract: A critical review. Journal of Water Process Engineering, 47. ISSN 2214-7144

Dol Ramli, Nur Amira and Abdul Hadi, Muhammad Faris and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Gene therapy in treating sickle cell anemia disease. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 13-28.

Dol Ramli, Nur Amira and Abdul Hadi, Muhammad Faris and Mohamed, Elizah and Noor Akhmazillah Mohd Fauzi, Noor Akhmazillah (2022) Gene therapy in treating sickle cell anemia disease. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 13-28.

E

Edward, Terence Telajan and Daniel, Basil David (2022) Dangerous driving among heavy vehicle drivers along Jalan Batu Pahat-Kluang (FT050). Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 139-148.

Eee, Chinge Tien and Yii, Chai Tin (2022) Hubungan efikasi kendiri, beban tugas dan masalah kesihatan mental dalam kalangan guru di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Esham, Fahmi Ezzuddin and Zulkiflli, Nur Amira and Thamilvanan,, Mathiventtan and Zulkifle,, Nurul Afiqah and Raihansyah, Mochammad Azriel and Abdullah, Fatin Aliah Phang and Nawi, Nina Diana and Yoong Kang, Adam Wong and Abdullah, Jamel and Tee, Kian Sek and Mohamad, Elmy Johana and Pusppanathan, Jaysuman and Zakaria, Zulkarnay (2022) Inductive mechcharger: mechanical phone charging dock using faraday's law. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 119-124. ISBN 978-967-2817-62-8

Ezal’Ain, Ezzah Norizni’Ain and Apin, Jenorico and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Antioxidants: nanotechnology and biotechnology fusion for medicine in overall. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 1-12.

F

F. Esmail, Bashar A. and Koziel, Slawomir and Szczepanski, Stanislaw and A. Majid, Huda (2022) Overview of approaches for compensating inherent metamaterials losses. IEEE Access, 10. pp. 67058-67080. ISSN 2169-3536

FARHAWAHIDAH, AHMAD PUAD (2022) BULETIN PUSAT SUKAN UNIVERSITI EDISI 3/2022. [Bulletin]

FARHAWAHIDAH, AHMAD PUAD (2022) BULETIN PUSAT SUKAN UNIVERSITI EDISI 4/2022. [Bulletin]

Falih, Falah Saleem (2022) The mediating effect of operational risk management between business attributes and competitive advantage: exploratory study (survey) in the Iraqi Banking Sector. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Farea Aldubai, Saif Abdulghafor (2022) Simulation and analysis of pointto-point differential drive mobile robot. Masters thesis, Universiti Tun Hussein Malaysia.

Fauzi, Muhamad Razizy and Amiruddin, Nurul Amira and Osman, Saliza Azlina and Mohamed Anuar, Rabiatul Adawiyah (2022) Interfacial reaction between SAC3807 lead-free solders and different copper substrate via reflow soldering process. Key Engineering Materials, 908. pp. 278-283. ISSN 1662-9795

Fauzi, Siti Nur Farzilah and Musa, Sabariah (2022) Assessment of water demand from urban and rural area in Kota Bharu, Kelantan. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 891-898.

Firas Mohammed Aswad, Firas Mohammed Aswad and Ali Mohammed Saleh Ahmed, Ali Mohammed Saleh Ahmed and Nafea Ali Majeed Alhammadi, Nafea Ali Majeed Alhammadi and Bashar Ahmad Khalaf, Bashar Ahmad Khalaf and Salama A. Mostafa, Salama A. Mostafa (2022) Deep learning in distributed denial-ofservice attacks detection method for Internet of Things networks. Journal of Intelligent Systems. pp. 1-13.

Firkhan Ali Hamid Ali, Firkhan Ali Hamid Ali and Mohd Sukri, Mohd Khairul Amin and Jali, Mohd Zalisham and Muhammad AlFatih, Muhammad AlFatih and Mohd Yusof, Mohd Azhari (2022) Web-Based Reporting Vulnerabilities System for Cyber Security Maintenance. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (3). pp. 198-205. ISSN 2462-1943

Fitriani, Nurina and Ni’matuzahroh2, Ni’matuzahroh and O’Marga, Timothy Tjahja Nugraha and Radin Mohamed, Radin Maya Saphira and Imron, Muhammad Fauzul and Isnadina, Dwi Ratri Mitha and Soedjono, Eddy Setiadi (2022) Optimization of slow sand filtration for the raw municipal wastewater treatment by using the blood cockle (anadara granosa) shell as an alternative filter media through the response surface methodology. Journal of Ecological Engineering, 23 (6). pp. 100-111.

Fouzy, Ahmad Shafeeq August and Nawawi, Sophan Wahyudi and Ramli, Muhammad Ruzairi and Leong, Yong Liang and Nian, Noel Ng Fong and Abas, Khairul Hamimah and Abdul Shaib, Mohd. Fadzli (2022) Cross-junction traffic control system via sensor feedback. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 89-104. ISBN 978-967-2817-62-8

Fulazzaky, M. A. and A. Salim, N. A. and Khamidun, M. H. and Puteh, M. H. and M. Yusof, A. R. and Abdullah, N. H. L. and Syafuddin ·, A. and Zaini, M. A. A. (2022) The mechanisms and kinetics of phosphate adsorption onto iron‑coated waste mussel shell observed from hydrodynamic column. International Journal of Environmental Science and Technology. pp. 6345-6358.

G

Ghaffar Kadhim, Kadhim (2022) The influence of corporate social responsibility “communication and activities” on customer satisfaction and loyalty towards hypermarkets in Kuala Lumpur. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Mohammad Haniff (2022) Mental fatigue analysis based on electroencephalography spectrum, mental fatigue scale, and reaction time. Masters thesis, Universiti Tun Hussein Malaysia.

Ghazali, N. B. and Seman, F. C. and Isa, K. and Ramli, K. N. and Z. Abidin, Z. and Mustam, S. M. and Haek, Haek and Z. Abidin, A. N. and Asrokin, A. (2022) Twisted pair cable fault diagnosis via random forest machine learning. Computers, Materials & Continua, 71 (3). pp. 5427-5440.

Gilani Mohamed, Mohamed Ahmed (2022) Development of hippocampus MRI image segmentation algorithm for progression detection of alzheimer’s disease (AD). Masters thesis, Universiti Tun Hussein Malaysia.

Goh, Ko Chian (2022) Rental value determination of temporary easement valuation for construction site. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gohari, Adel and Ahmad, Anuar and Balasbaneh, Ali Tighnavard and Gohari, Ali and Hasan, Razi and Sholagberu, Abdulkadir Taofeeq (2022) Significance of intermodal freight modal choice criteria: MCDM-based decision support models and SP-based modal shift policies. Transport Policy, 121. pp. 46-60.

Gonawan, F. N. and Romli, M. M. and M. Zuhan, M. K. N. and Jaya, M. A. T. (2022) Nanoplasma generation by ultrashort pulse laser. JOURNAL OF CHEMICAL ENGINEERING AND INDUSTRIAL BIOTECHNOLOGY (JCEIB), 8 (1). pp. 33-41.

Gueme, Ganama Moustapha (2022) Analysis on the foreign direct investment, economic growth, and economic development in Chad. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Gunaseelan, Khemaalatha and Subramaniam, Tamil Selvan and Lai, Chee Sern and Jabor, Mohd Khata and Rathakrishnan, Geetha (2022) Digital entrepreneurship among higher education students. International Journal of Academic Research in Business and Social Sciences. pp. 1-10. ISSN 2222-6990

Gunaseelan, Khemaalatha and Subramaniam, Tamil Selvan and Lai, Chee Sern and Jabor, Mohd Khata and Rathakrishnan, Geetha (2022) Impact of digital entrepreneurship in Malaysia in the era of Covid-19 pandemic. International Journal of Academic Research in Business and Social Sciences. ISSN 2222-6990

H

Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Cionita, Tezara and Norlaila, Mohd Bakeri and Mohd Badari, Muhammad Amin and Irawan, Agustinus Purna and Jaafar, Jamiluddin and Rihayat, Teuku and Junid, Ramli and Fitriyana, Deni Fajar (2022) Potentiality of utilizing woven pineapple leaf fibre for polymer composite. Polymers. pp. 1-11. ISSN 2073-4360

Hafizal, Rabiatul Adawiyah and Shamsudin, Siti Hajar and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Production of insulin using recombinant DNA technology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 29-44.

Hafizal, Rabiatul Adawiyah and Shamsudin, Siti Hajar and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Production of insulin using recombinant dna technology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 29-44.

Hairol, Nur Nazatul Najwa and Adnan, Nurul Aini and Norhelmi, Siti Aishah and Mohamed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Medicinal biotechnology in antibiotics. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, pp. 45-56.

Haitham, Al Fatli (2022) New energy-efficient-user clustering and power allocation for NOMA in 5G millimeter-wave massive MIMO. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Haj Dawood, Ahmad Helmi Dawood (2022) Design of grid connected photovoltaic power plant: for Al-Ahliyya Amman University in Jordan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hakim, S. J. S. and Ibrahim, M. H. W. and Mohammadhassani, M. and Yeoh, D. and M. Jaini, Z. and T. Chik, T.N. (2022) Implementing fuzzy-based artificial intelligence approach for location of damage in structures. Civil Engineering and Architecture, 10 (4). pp. 1564-1573. ISSN 2332-1121

Hakimi, Muhammad Adib and Nordin, Normayati (2022) Effect of flow compressibility in convergent-divergent nozzle. Journal of Complex Flow, 4 (2). pp. 33-38. ISSN 2672-7374

Hamdan, Mohamad Alif Hakimi (2022) The performance of different types of flower-like zinc oxide for photocatalytic desulfurization of synthetic thiophene. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Prof. Madya Ts. Dr. Rafidah (2022) Buletin Fakulti Kejuruteraan Awam dan Alam Bina - CETUSAN Edisi Jan-Jun 2022. [Bulletin]

Hamdi, Mustafa Maad and Audah, Lukman and Rashid, Sami Abduljabbar (2022) Data dissemination in VANETs using clustering and probabilistic forwarding based on adaptive jumping multi-objective firefly optimization. IEEE Access, 10. pp. 14624-14642.

Hamid Hassan, Mustafa and Mostafa, Salama A. and Baharum, Zirawani and Mustapha, Aida and Saringat, Mohd Zainuri and Afyenn, Rita (2022) A Nested Monte Carlo Simulation Model for Enhancing Dynamic Air Pollution Risk Assessment. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION, 6 (4). pp. 876-882.

Hamid Hassan, Mustafa and Mostafa, Salama A. and Baharum, Zirawani and Mustapha, Aida and Saringat, Mohd Zainuri and Afyenni, Rita (2022) A Nested Monte Carlo Simulation Model for Enhancing Dynamic Air Pollution Risk Assessment. INTERNATIONAL JOURNAL ON INFORMATICS VISUALIZATION, 6 (4). pp. 1-7. ISSN 876-882

Hamidon, Ahmad Mursyid and Sabariah, Sabariah Musa (2022) River water level time-series forecasting by using smoothing technique. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1312-1319.

Hamidon, M. Adam Bukhori and Hussin, R. and Harun, Z. and Yunos, M. Z. and A.R. Ainuddin, A.R. Ainuddin (2022) Fabrication and characterization of modified ZnO-kapok fiber for separating surfactant-free oil-in-water emulsions. In: AIP Conference Proceedings.

Hamir, Mohd. Indra and Rashid, Umi Kartini and Harun, Amran (2022) Covid-19 and its impact on the Malaysian SMEs. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 29-38. ISBN 978-967-2817-57-4

Hammoodi, Ahmed Talaat (2022) New methods of windowing for reducing the out of band emission with low complexity in the 5G waveform. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Maytham Qabel (2022) Polystyrene/titanium dioxide nanocomposite prepared by sol-gel method at low temperature for small energy bandgap. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Norhasyimah and Mohd Rosli, Nor Farah Emilia and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida and Zakaria, Normah (2022) Aplikasi android pembelajaran abjad Bahasa Jepun (JingoCat Apps). Innovative Teaching and Learning Journal. pp. 52-60. ISSN 2600-8572

Hasan Ba-Btain, Faisal Abdulkarem (2022) The feasibility of bitscope raspberry pi for monitoring voltage and capturing data. Masters thesis, Universiti Tun Hussein Malaysia.

Hashim, Norashuha and Hasim, Muhammad Asyraf and Harun, Amran (2022) Covid-19 and its impacts on consumer decision-making process. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 21-28. ISBN 978-967-2817-57-4

Hashim, Nurul Falah and Mohd Shariff, Shazali and Yaakob, Mohd Yusof and Md Sahak, Adibah Aishah (2022) Parents in preparing meal for children: knowledge, attitude and practice. Journal of Tourism, Hospitality & Culinary Arts (JTHCA), 14 (2). pp. 35-49.

Hashim, Suhaizal and Abdul Rahman, Khairul Anuar and Saimi, Muhammad Ariff Nur and Baharudin, Nurhayati and Mohamed Salleh, Muhammad and Nincarean, Danakorn and Maneetien, Nopadon (2022) Comprehensive simulation of adjustable welding jig through ASIE model in refrigeration and air conditioning workshop. International Journal of Nanoelectronics and Materials, 15. pp. 1-14.

Hashim, Suhaizal and Abdullah, Nurhanim Saadah and Hamzah, Usuloudin (2022) Revolusi Industri. Penerbit UTHM, UTHM.

Hasnadi, Mohammad Syahir and Ismail, Muhammad Yusuf and Mohd Fauzi, Noor Akhmazillah (2022) Genetically modified organism. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 29-38.

Hasrul, Nur Izzati and Rashid, Umi Kartini and Harun, Amran (2022) Covid-19 and marketing strategies. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 74-83. ISBN 978-967-2817-57-4

Hassan, Mustafa Hamid and A. Mostafa, Salama and Baharum, Zirawani and Mustapha, Aida and Saringat, Mohd Zainuri and Afyenni, Rita (2022) A Nested Monte Carlo Simulation Model for Enhancing Dynamic Air Pollution Risk Assessment. Inform. Visualization, 6 (4). pp. 876-882.

Hassan, Zaid Tariq (2022) Development of differential protection scheme using positive sequence current for a microgrid. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hassan Alhosani, Adnan Ali (2022) The delegation of authority and its impact on decision making process with mediating role of employee performance in Dubai Police. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hassanea, Abdelhamid Issa and Didane, Djamal Hissein and Tahir, Abakar Mahamat and Hauglustaine, Jean Marie and Manshoor, Bukhari and Mohideen Batcha, Mohd Faizal and Tamba, Jean Gaston and Mouangue, Ruben Martin (2022) Techno-economic feasibility of a remote PV minigrid electrification system for five localities in Chad. International Journal of Sustainable Engineering, 15 (1). pp. 179-193.

Hau, Chin Yong and Nordin, Normayati and Rasidi, Shamsuri Mohamed and Teo, Wen Yong and Anuar, Muhammad Musleh and Shariff, Muhammad Zahid Firdaus (2022) Effect of angle of turn on loss characteristics and flow rectification of curve diffuser. CFD Letters, 14 (1). pp. 38-51. ISSN 2180-1363

Hettiarachchi, Nuwan Lakmal and Subramaniam, Tamil Selvan and Muhammad Nurtanto, Muhammad Nurtanto and Sarala Thulasi Palpanadan, Sarala Thulasi Palpanadan and Zachariah John A. Belmonte, Zachariah John A. Belmonte and Arul Lawrence Antony Selvaraj,, Arul Lawrence Antony Selvaraj, and Nur Kholifah, Nur Kholifah (2022) Educating Financial Accounting: A Need Analysis for Technology-Driven Problem-Solving Skills. -. pp. 1-8.

Hettiarachchi, Nuwan Lakmal and Subramaniam, Tamil Selvan and Sarala Thulasi Palpanadan, Sarala Thulasi Palpanadan and Al-Fattal, Anas (2022) Infusing Communication Skills into Financial Accounting Curriculum: A perspective from the Digital Era. -. pp. 1-9.

Hikmat, Ameer Nadhum (2022) A trust model mechanism based on quality of service to reduce energy consumption in the internet of things network. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hillary, Ermyza (2022) Utilization of demolished tile material and cement to stabilize marine clay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ho, C. S. and Mohd Nor, M. K. and Lajis, M. A. and A. Samad, M. S. (2022) Damage characteristics of recycled aluminium alloys AA6061 undergoing finite strain deformation of tensile loading. The International Journal of Integrated Engineering, 14 (4). pp. 1-9.

Hossain, Kabir and Sabapathy, Thennarasan and Jusoh, Muzammil and Shen, Han Lee and Ab Rahman, Khairul Shakir and Kamarudin, Muhammad Ramlee (2022) Negative index metamaterial-based frequency-reconfigurable textile cpw antenna for microwave imaging of breast cancer. Sensors, 22 (1625). pp. 1-23.

Hui, Hwang Goh and Lan, Zhentao and Zhang, Dongdong and Wei Dai, Wei Dai and Kurniawan, Tonni Agustiono and Kai, Chen Goh (2022) Estimation of the state of health (SOH) of batteries using discrete curvature feature extraction. Journal of Energy Storage, 50. pp. 1-15.

Hui, Hwang Goh and Li, Chunyu and Zhang, Dongdong and Dai, Wei and Chee, Shen Lim and Kurniawan, Tonni Agustiono and Kai, Chen Goh (2022) Application of choosing by advantages to determine the optimal site for solar power plants. Scientific Reports, 12 (4113). ISSN 2045-2322

Hui, Hwang Goh and Lian Zong, Lian Zong and Zhang, Dongdong and Hui Liu, Hui Liu and Wei Dai, Wei Dai and Chee, Shen Lim and Kurniawan, Tonni Agustiono and Tze Kin Teo, Kenneth and Kai, Chen Goh (2022) Mid- and long-term strategy based on electric vehicle charging unpredictability and ownership estimation. International Journal of Electrical Power and Energy Systems, 142. pp. 1-14.

Hui, Hwang Goh and Peng, Gumeng and Zhang, Dongdong and Wei Dai, Wei Dai and Kurniawan, Tonni Agustiono and Kai, Chen Goh and Chin, Leei Cham (2022) A new wind speed scenario generation method based on principal component and R-Vine Copula theories. Energies, 15. pp. 1-21. ISSN 1996-1073

Hui, Ling Chua and Huong, Audrey (2022) Photoacoustic phase angle for noninvasive monitoring of microcirculatory change in human skin: a preliminary investigation. Jurnal Teknologi (Sciences & Engineering), 84 (4). pp. 159-166. ISSN 2180–3722

Husin, Akmal Hakim and Hamzani, Syahmil Hakim and Amirnordin, Shahrin Hisham and Mohideen Batcha, Mohd Faizal and Wahidon, Rafiuddin and Wae-hayee, Makatar (2022) Drying studies of oil palm decanter cake for production of green fertilizer. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 97 (2). pp. 66-79.

Hussin, Mohamed Saiful Firdaus and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana and Abdul Wahap, Mohd Arizam (2022) Extraction of natural hydroxyapatite for biomedical applications—a review. Heliyon, 8. pp. 1-11. ISSN 2405-8440

Hussin, Mohamed Saiful Firdaus and Idris, Maizlinda Izwana and Abdullah, Hasan Zuhudi and Mohamed Sultan, Al Amin (2022) Synthesis and characterisation of hydroxyapatite from fringescale sardinella for biomedical applications. In: AIP Conference Proceedings.

h Tung, Chih Tung and Ping, Lang Yen and Chao-Yin Tsai1,, Yin Tsai and Pauline Ong, Pauline and Jer-Wei Lin1, Wei Lin and Yung, Huei Chang and Chen, Suming (2022) Nondestructive quantitative analysis of water potential of tomato leaves using online hyperspectral imaging system. Applied Engineering in Agriculture, 38 (2). pp. 273-282.

I

Ibrahim, Haziqatulhanis and Sazali, Norazlianie and Wan Salleh, Wan Norharyati and Ngadiman, Nor Hasrul Akhmal and Fadila, Nor Akmal and Harun, Zawati (2022) Outlook on the carbon-based materials for heavy metal removal. Biointerface Research in Applied Chemistry, 12 (4). pp. 5303-5323. ISSN 2069-5837

Ibrahim, Muhammad Shahrul Shafendy (2022) Car wash wastewater treatment using kapok fiber as adsorbent. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Nabisah and Ahmad, Noor Azizah (2022) Peminggiran sosial dalam kalangan warga emas: Intervensi ke arah penuaan sihat. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 44-70.

Ibrahim, Noor Saidatul Maya (2022) Evaluation on performance and environmental impacts of the revived industrial lead-acid batteries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Nurul Saliha Amani (2022) Resource-efficient coverage path planning for unmanned aerial vehicle based aerial gateway in LoRaWAN. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Sallehuddin and Md Yamin, Mohd Yazid and Md Yunus, Mohd Amri and Abdul Rahim, Ruzairi and Shamsudin, Abu Ubaidah and Ridzuan Aw, Suzanna and Mohd Nayan, Norkharziana and Abdul Manaf, Mohamad Shukri (2022) A lane detection and marking system on unmarked road. In: Sensor & Instrumentation System Series. 28 . Penerbit UTHM, UTHM, pp. 13-22. ISBN 978-967-2817-62-8

Ibrahim Basheer, Omar Abdelrouf (2022) Designing a large scale solar PV system and impact analysis of its integration into Sudan power grid. Masters thesis, Universiti Tun Hussein Malaysia.

Iderus, Nadia Natasha and Mohd Shaha ,, Nurhaslinda and Mohameda, Elizah and Mohd Kassima, Angzzas Sari and Abdul Hamid, Mariani (2022) Bioethanol production from cassava and sugar cane molasses. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 81-96.

Ihsan Salman, Ihsan Salman and Khalid Mohammed Saffer, Khalid Mohammed Saffer and Hayder H. Saf, Hayder H. Saf and Salama A. Mostafa, Salama A. Mostafa and Bashar Ahmad Khalaf, Bashar Ahmad Khalaf (2022) Salp swarm and gray wolf optimizer for improving the efficiency of power supply network in radial distribution systems. Research Article. pp. 1-12.

Iman, Muhammad Izzat and Ahmad, Noor Aliza (2022) A performance review of grass swales channel in Malaysia. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 663-671.

Ishak, Mohamad Hafis Izran and Sahlan, Shafishuhaza and Ullah, Faiza and Md Saleh, Muhammad Qayyim and Abu Bakar, Mohd Hafiez and Ng, Wen Da and Abbas, Nurul Atikah and Ahmad Mukred, Jameel Abdulla and Jamaluddin, Juliza (2022) Eye-see:ai-developed device for the visually impaired. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 61-66. ISBN 978-967-2817-62-8

Ishak, Nurul Syafeeqa (2022) Detection of sugar solution at low concentration using terahertz spectroscopy combined with frequency-selective surface (FSS). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ishfaq, Rahila and Ruslan, Nurun Najwa and Attan, Nursyafreena and Jikan, Suzi Salwah and Ameruddin, Amira Saryati (2022) Synthesis and characterization of metal sulfates loaded Palm Empty Fruit Bunch (PEFB) for biodiesel production. Sains Malaysiana, 51 (2). pp. 519-532.

Ismail, Fadillah and Juhari, Nurhannani and Mohammed Al-Qershi, Nagwan Abdulwahab and Imran, Muhammad and Alhosani, Adnan Ali Hassan and Jaes, Lutfan (2022) The effect of psychological contract towards deviant behaviour, employee engagement and employee commitment. Webology, 19 (2). pp. 4665-4685. ISSN 1735-188x

Ismail, Fadillah and Salahudin, Shahrul Nizam and Jaes, Lutfan and Yusoff, Mohd Zarir and Chai, Jaan Xin and Alhosani, Adnan Ali Hassan Humaid (2022) The effect of performance appraisal system towards employee performance, employee motivation and employee satisfaction. Webology, 19 (2). pp. 4686-4704. ISSN 1735-188x

Ismail, Mohd Erfy and Razali, Nizamuddin and Hashim, Suhaizal and Masek, Alias and Ismail, Irwan Mahazir (2022) Design and analysis of flour sieving machine prototype using autodesk inventor. Journal of Positive School Psychology, 6 (2). pp. 2625-2631.

Ismail, Muhammad Pirdaus and Ishak, Izuan Amin and Samiran, Nor Afzanizam and Mohammad, Ahmad Faiz and Mohd Salleh, Zuliazura and Darlis, Nofrizalidris (2022) CFD analysis on the effect of vortex generator on sedan car using ANSYS software. International Journal of Integrated Engineering, 14 (1). pp. 73-83. ISSN 2229-838X

Izaan, I Hadi and Hani, A. Suraya and A. W., Norhayati and O., Mohamad Hairi and J., Zalipah and A. H., Noor Azlina and S., Norhafizah and Mia Wimala, Mia Wimala (2022) Preliminary study of sago fine waste as a sand replacement material for cement brick. In: ICONCEES-2021, 15 & 16 November 2021, Virtual conference.

Izahudin, Muhammad Haziq and Rosmi, Muhammad Hilman and Mohd Fauzi, Noor Akhmazillah (2022) Neem oil as biopesticides. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 13-28.

J

JUBAIR, MOHAMMED AHMED and MOSTAFA, SALAMA A. and ASAAD ZEBARI, DILOVAN and MUHEE HARIZ, HUSSEIN MUHEE and ABDULSATTAR, NEJOOD FAISAL A and HAMID HASSAN, MUSTAFA and HASHIM ABBAS, ALI and HASHIM ABBAS, FATIMA and ALASIRY, AREEJ and ALOUANE, M. TURKI-HADJ (2022) A QoS Aware Cluster Head Selection and Hybrid Cryptography Routing Protocol for Enhancingm Efficiency and Security of VANET. Digital Object Identifier. pp. 1-13. ISSN 3224466

JUBAIR, MOHAMMED AHMED and Mostafa, Salama A. and ZEBARI, DILOVAN ASAAD and HARIZ, HUSSEIN MUHEE and ABDULSATTAR, NEJOOD FAISAL and HASSAN, MUSTAFA HAMID and ABBAS, ALI HASHIM and ABBAS, FATIMA HASHIM and ALASIRY, AREEJ and ALOUANE, M. TURKI-HADJ (2022) A QoS Aware Cluster Head Selection and Hybrid Cryptography Routing Protocol for Enhancing Efficiency and Security of VANET. Digital Object Identifier. pp. 1-13. ISSN 3224466 (Unpublished)

Jaibee, Shafizan and Muhd Nor, Nik Hisyamudin and Azizul, Muhammad Redzuan and Abd Rahim, Abd Khalil and Mohammad, Fariza and Sia, Chee Kong and Ahmad, Md Fauzi and Seiji, Yokohama (2022) Effectivity study of waste personal computer through manual dismantling and hydrometallurgical process using leaching process. ARPN Journal of Engineering and Applied Sciences, 11 (2). pp. 7545-7549. ISSN 1819-6608

Jaini, Nur ‘Afiqah and Wan Yusoff, Wan Zahari and Ishak, Mohd Hafizal and Sulaiman, Muhammad Azwan (2022) Penyelenggaraan bangunan dalam pengurusan fasiliti: elemen mempengaruhi kualiti amalan penyelenggaraan bangunan. Journal of Social Transformation and Regional Development, 4 (1). pp. 18-26.

Jamahuri, Nadira and A. Khalifa, Nasradeen (2022) Plastic as the fill-in material for pothole repairing. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1029-1038.

Jamil, Dzuliana Fatin (2022) Caputo-fabrizio fractional derivative for magnetic blood flow of Newtonian and casson fluid in an inclined artery. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jasni, Mohd Alif and Abu Bakar Ah, Siti Hajar (2022) Stigma sosial dan marginalisasi bekas banduan: konsep, implikasi dan tindakan intervensi. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 168-191.

Jia, Heng Ong and Pauline Ong, Pauline Ong and Woon, Kiow Lee (2022) Image-based oil palm leaf disease detection using convolutional neural network. Journal of Information and Communication Technology (JICT), 21 (3). pp. 383-410. ISSN 1675-414X

Jia Xin Chan, Jia Xin Chan and Joon Fatt Wong, Joon Fatt Wong and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Nirma, Umar and Hashim, Shahrir and Yern Chee Ching, Yern Chee Ching and Yunos, Muhamad Zaini and Yahaya, Ridwan and T. M. Sampath U. Gunathilake, T. M. Sampath U. Gunathilake (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polymer. pp. 1-17.

Jia Xin Chan, Jia Xin Chan and Joon Fatt Wong, Joon Fatt Wong and Hassan, Azman and Othman, Norhayani and Abd Razak, Jeefferie and Umar Nirmal, Umar Nirmal and Hashim, Shahrir and Yern Chee Ching, Yern Chee Ching and Yunos, Muhamad Zaini and Yahaya, Ridwan and T. M. Sampath U. Gunathilake, T. M. Sampath U. Gunathilake (2022) Mechanical, thermal, tribological, and flammability properties of polybutylene terephthalate composites: Comparing the effects of synthetic wollastonite nanofibers, natural wollastonite, and graphene oxide. Applied Polymer. pp. 1-17.

Joha, Anis and Hassan, Sallaudin and Shamsudin, Mohd. Farid and Hasim, Muhammad Asyraf (2022) Purchasing Behaviour among Small Medium Enterprise (SME) customer during Covid-19 Pandemic using 7Ps approach. Journal of Positive School Psychology, 6 (3). pp. 529-539.

Jopri, Hairunissa (2022) Model strategi pengajaran matematik berkonsepkan integrasi pedagogi eksplorasi (IPE) di Kolej Vokasional Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jubair, Mohammed Ahmed (2022) A framework for automated quality assessment of software requirement specification based on part-of-speech tagging, multi-agent k-means clustering and case-based reasoning. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jubair, Mohammed Ahmed and A. Mostafa, Salama and Mustapha, Aida and Salamat, Mohamad Aizi and Hassan, Mustafa Hamid and Mohammed, Mazin Abed and Fahad Taha AL-Dhief, Fahad Taha AL-Dhief (2022) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. The Institution of Engineering and Technology.. pp. 1-17.

Jubair, Mohammed Ahmed and Mostafa2, Salama A. and Mustapha, Aida and Salamat, Mohamad Aizi and Hassan, Mustafa Hamid and Mohammed, Mazin Abed and Taha AL-Dhief, Fahad (2022) A multi-agent K-means with case-based reasoning for an automated quality assessment of software requirement specification. IET Communications. pp. 1-17.

K

K. Kareem, Ali and M. Gabir, Mustafa and R. Ali, Inas and E. Ismail, Al and Taib, Ishkrizat and Darlis, Nofrizalidris and M. Almoayed, Omar (2022) A review on femoropopliteal arterial deformation during daily lives and nickel-titanium stent properties. JOURNAL OF MEDICAL ENGINEERING & TECHNOLOGY, 46 (4). pp. 300-317.

Kabir, Mohd Hafizalrisman and Hamidon, Nuramidah and Awang, Mariah and Abdul Rahman, Mohammad Ashraf and Adnan, Suraya Hani (2022) An edible cutleries using green materials: sorghum flour. In: Green Infrastructure. Springer Link, pp. 305-317. ISBN 978-981-16-6382-6

Kamaruddin, Akmalia Shahira and Katimon, Mohd Nizam (2022) Simulation study on the material stress distribution respect to different angle of ECAP. In: Research Progress in Mechanical and Manufacturing Engineering.

Kamaruddin, Nor Asmalinda (2022) The effects of the reinforcement of alumina and rice husk particles on the hybrid recycled aluminium AA7075 chips composite on physical, mechanical and morphological properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaruddin, Nor Kamariah (2022) Determinants of workplace pro-environmental behavior (WPEB) among Malaysian Public Servants. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Noor Hasliza (2022) Fabrication and characterisation of ceramic hollow fibre membrane from metakaolin and corn cob ash for oil–water separation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kamarulzaman, M. F. and Zin, N. M. and Mohd Nor, M. K. and Samad, M. S. A. (2022) Modelling numerical simulation of DP590 steel undergoing finite strain deformation of uniaxial tensile test. In: Research Progress in Mechanical and Manufacturing Engineering.

Kamaruzaman, Nur Hazirah and Mohd Noor, Nur Nabilah and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Ponnusamy, Senthil Kumar and Sharma, Ajit and N. Vo, Dai-Viet (2022) Applicability of bio-synthesized nanoparticles in fungal secondary metabolites products and plant extracts for eliminating antibiotic-resistant bacteria risks in non-clinical environments. Environmental Research, 209. pp. 1-17.

Kamil, Muhammad and Ho, Fu Haw (2022) Development of a product remanufacturing assessment tool based on part attributes and features. In: Research Progress in Mechanical and Manufacturing Engineering.

Kareem, A. K. and M. Gabir, Mustafa and Almoayed, O. M. and Ismail, A. E. and Taib, Ishkrizat and Darlis, Nofrizalidris and Ali, I. R. (2022) A systematic review on cardiovascular stent and stenting failure: coherent taxonomy, performance measures, motivations, open challenges and recommendations. International Journal of Integrated Engineering, 14 (1). pp. 102-126. ISSN 2229-838X

Kareem, M. W. and Habib, Khairul and A. Pasha, Amjad and Irshad, Kashif and Afolabi, L.O. and Saha, Bidyut Baran (2022) Experimental study of multi-pass solar air thermal collector system assisted with sensible energy-storing matrix. Energy, 245. pp. 1-12.

Kasim, Siti Maliati (2022) Pelaksanaan ibadat solat dalam kalangan pesakit ortopedik di Hospital Sultanah Nora Ismail, Batu Pahat, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kelundapyan, Rhubenthiraan (2022) Investigation of porous material as potential manikin for outdoor thermal comfort index. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kh. Abugnah, Elhadi and Wan Salim, Wan Saiful-Islam and M. Elfaghi, Abdulhafid and Ngali, Zamani (2022) Comparison of 2D and 3D modelling applied to single phase flow of nanofluid through corrugated channels. CFD Letters, 14 (1). pp. 128-139.

Khairu Razak, Siti Badriah (2022) Markerless motion capture system via kinematic analysis of angular lower limb. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khairudin, Siti Nur Fatimah and Pahroraji, Hazriel Faizal and Alias, Siti Khadijah and Ibrahim, Mohd Halim Irwan (2022) A review of metal injection moulding on WC-Co cemented carbide comprised of Grain Growth Inhibitors (GGI). Journal of Science and Technology, 14 (1). pp. 84-101.

Khaleefah Al-Dulaimi, Shihab Hamad (2022) An improved multi-agent system for scanned document authentication using collaborative reinforcement learning technique. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khalfan Aldahmani, Ahmed Khamis Obaid (2022) The mediating influence of national culture on the relationship between job happiness and job satisfaction in Dubai Metro. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khatak, Umar Farooq (2022) Test case selection and prioritzation for object-oriented software based on slicing and coupling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khatir Kabashi, Shihabuddin Kabashi (2022) Forest fire monitoring system. Masters thesis, Universiti Tun Hussein Malaysia.

Khiflie, Nur Noha Syarafana and Abd Rashid, Nur Amira and Razali, Nor Faizah and Mohd Fauzi, Noor Akhmazillah (2022) Cultured meat from muscle stem cells. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 1-14. ISBN 978-967-2817-85-7

Kholil, Muhammad (2022) A lean six sigma framework for identifying sources of waste in manufacturing sector in Indonesia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khong, F. H. and Rahmat, M. F. and Sunar, N. H. and Ramli, Mimi Faisyalini and Jamaluddin, Juliza and Ahmad, Nasarudin and Nawawi, Sophan Wahyudi and Ibrahim, Sallehudin and Md. Yunos, Yusri (2022) Linear ARX modelling of pneumatic actuator system. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 125-143. ISBN 978-967-2817-62-8

Khoo, Matthew Kah Wen (2022) 14-BIT CMOS hybrid differential DAC for high-resolution sar ADC using VLSI implementation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kirin, Arwansyah and Ismail, Faisal Husen and Masruri, Muhammad and Siti Marpuah, Siti Marpuah and Ahmad Bakri, Hafizah and Wan Zahari, Wan Shahira Mardhiah (2022) Tahap kepuasan pelajar terhadap aplikasi dalam talian dan si kap pensyarah dalam pembelajaran jarak jauh di Universiti Tun Hussein Onn Malaysia (UTHM) semasa pandemik Covid-19. Al-Hikmah International Journal for Islamic Studies & Human Sciences, 5 (1). pp. 1-26.

Kirin, Dr. Arwansyah and Wan Ainaa Mardhiah, Wan Ainaa Mardhiah and Dr. Siti Marpuah, Dr. Siti Marpuah and Husen Ismail,, Dr. Faisal and Dr. Muhammad Masruri, Dr. Muhammad Masruri and Dr. Riki Rahman, Dr. Riki Rahman (2022) The Book of Nasa’ih Al-‘Ibad and Tanqih Al-Qaul by Shaykh Nawawi Al-Banteni: A Comparative Study on The Method of Syarh Hadith. International Journal of Academic Research in Business and Social Sciences, 132 (1). pp. 1-13. ISSN 2222-6990

Kumar, Vinod Kumar K Sivak and Abdullah, Aslam and Basuno, Bambang (2022) Comparative study of two dimensional boundary layer over NACA 23012 and NACA 23021 airfoils by using keller’s box method. Journal of Advanced Mechanical Engineering Applications, 3 (1). pp. 25-33.

Kwad, Ayad Mahmood (2022) Online system identification development based on recursive weighted least square neural networks of nonlinear hammerstein and wiener models. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

L

Lai, Chee Fung (2022) The simulation study of preheating temperature and blank thickness on hot press forming of aluminium alloy 6061. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, T. C. and Mohd Pu’ad, N. A. S. and Alipal, J. and Muhamad, M. S. and Basri, H. Basri and Idris, M. I. and Abdullah, H. Z. (2022) Tilapia wastes to valuable materials: A brief review of biomedical, wastewater treatment, and biofuel applications. Materials Today: Proceedings, 57. pp. 1389-1395.

Lee, Te Chuana and Zaidi, Nabiha Husna (2022) The challenges of 3D food printing in malaysian manufacturing firms: a preliminary study. In: 5TH INTERNATIONAL CONFERENCE ON INDUSTRY 4.0 AND SMART MANUFACTURING.

Lee, Wee Haw (2022) Correlation factors and demographic characteristics on homebuyer’s purchase decision amid covid-19 pandemic at Pasir Gudang, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liew, Pok Huai (2022) A comparison study on the economic performance of conventional streetlight and solar streetlight in Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liew Oi Leng, Irene and Toh, Hwee Ting and Mohammed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Vaccines for contagious diseases. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 57-74.

Lim, Shing Chee (2022) Development of electrospinning machine for the production of homogeneous and functionally graded multilayer polymeric nanofibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Wei Guan (2022) Program kitar semula: isu governan yang baik di Batu Pahat. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Liwauddin, Muhammad Lut and Ayob, Mohammad Afif and Rohaziat, Nurasyeera (2022) Continuous data collection of under extrusion in FDM 3D printers for deep-learning dataset. In: IEEE 5th International Symposium in Robotics and Manufacturing Automation, 6-8 August 2022, Malacca.

Liwauddin, Muhammad Lut and Shamsudin, Abu Ubaidah and Ayob, Mohammad Afif and Rohaziat, Nurasyeera and Zakaria, Mohamad Fauzi (2022) Development of a dodecacopter using Pixhawk 2.4.8 autopilot flight controller. In: IEEE 5th International Symposium in Robotics and Manufacturing Automation,, 6-8 August 2022, Malacca.

Lokhande, P. E. and Pakdel, Amir and Pathan, H. M. and Kumar, Deepak and N. Vo, Dai-Viet and Al-Gheethi, Adel and Sharma, Ajit and Goel, Saurav and Pratap Singh, Prabal and Lee, Byeong-Kyu (2022) Prospects of MXenes in energy storage applications. Chemosphere, 297. pp. 1-24. ISSN 0045-6535

Lowrance, Yohannes Nyambong and Azmi, Mohd Azham and Abdul rahman, Hamimah and Abdul Rahman, Nurul Farhana and Zakaria, Hanis and Hassan, Suhaimi (2022) Influence of Electrophoretic Deposition (EPD) Voltage on SOFC interconnect morphology. In: Key Engineering Materials.

Lowrance, Yohannes Nyambong and Azmi, Mohd Azham and Abdul rahman, Hamimah and Abdul Rahman, Nurul Farhana and Zakaria, Hanis and Hassan, Suhaimi (2022) Influence of Electrophoretic Deposition (EPD) voltage on SOFC interconnect morphology. In: Key Engineering Materials.

M

M., Muktiarni and A. Rashid, Ana Haziqah and Barliana, Mokhamad Syaom and Saleh, Ilhamdaniah and Mulyadi, Yadi and Salira, Ade Budhi and Sari, Ana Ramdani and Masek, Alias and Paimin, Aini Nazura and Ab Halim, Fazlinda and Wan Muda, Wan Hanim Nadrah (2022) Readiness for online learning during Covid-19 pandemic in the vocational education. Journal of Engineering Education Transformations, 35. pp. 81-85.

M. A. Elfaghia, Abdulhafid and A. Abosbaia, Alhadi and A. Alkbir, Munir F. and A. B. Omran, Abdoulhdi (2022) Heat transfer enhancement in pipe using Al2O3/water nanofluid. CFD Letters, 14 (9). pp. 118-124. ISSN 2180-1363

M. A. Elfaghia, Abdulhafid and A. Abosbaia, Alhadi and F. A. Alkbir, Munir and A. B. Omran, Abdoulhdi (2022) CFD simulation of forced convection heat transfer enhancement in pipe using Al2O3/water nanofluid. Journal of Advanced Research in Numerical Heat Transfer, 8 (1). pp. 44-49.

M. N., Noorasyikin and M., Zainab (2022) Geophysical analysis on electrical resistivity technique toward composite of geostrata. Journal of Engineering and Science Research, 6 (1). pp. 10-17.

M. Z., Ahmad Fakhrurrazi and W. Q. A., Wan Razali and M. Z., Mahfuzah (2022) Pengaruh zikir terhadap kesihatan mental dan tekanan psikologi dalam mendepani cabaran revolusi industri 4.0. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 1-12.

MOHAMMED AHMED JUBAIR, MOHAMMED AHMED JUBAIR and SALAMA A. MOSTAFA, SALAMA A. MOSTAFA and DILOVAN ASAAD ZEBARI, DILOVAN ASAAD ZEBARI and HUSSEIN MUHEE HARIZ, HUSSEIN MUHEE HARIZ and NEJOOD FAISAL ABDULSATTAR, NEJOOD FAISAL ABDULSATTAR and MUSTAFA HAMID HASSAN, MUSTAFA HAMID HASSAN and ALI HASHIM ABBAS, ALI HASHIM ABBAS and FATIMA HASHIM ABBAS, FATIMA HASHIM ABBAS and AREEJ ALASIRY, AREEJ ALASIRY and M. TURKI-HADJ ALOUANE, M. TURKI-HADJ ALOUANE (2022) A QoS Aware Cluster Head Selection and Hybrid Cryptography Routing Protocol for Enhancing Efficiency and Security of VANETs. Digital Object Identifier, 10. pp. 1-13.

Maarof, Nurul Amiera Shahida (2022) Fabrication of hexagonal zinc oxide nanorods on seeded substrate via hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Maha Agung, Putera Agung and Hasan, Muhammad Fathurrouf and Ahmad, Mustaffa Anjang and Martina, Nunung and Saifullizan, M. B. (2022) Prediction of QU AND Ru capacitiesof pile in clayey soil layer using geospatial analysis. International Journal of GEOMATE, 23 (98). pp. 31-38. ISSN 2186-2990

Mahir, Mohd Azman and Mohd Fauzi, Mohd Sufi Huzaimi and Mohamed Rehan, Aisyah (2022) Production of natural food-derived vitamin c from orange juice. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 89-102.

Mahir, Mohd Azman and Mohd Fauzi, Mohd Sufi Huzaimi and Mohamed Rehan, Aisyah and Mohammed, Elizah (2022) Production of natural food-derived vitamin c from orange juice. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 89-102.

Mahmood, Muhammad Amirul Hakim and A.Khalifa, Nasradeen (2022) Review study on stabilized fly ash type c as admixture in sub-grade of pavement. Recent Trends in Civil Engineering and Built Environment, 3 (1). 074-082.

Mahmood, Salwa and Nasir, Siti Hana and Mamat, Norashid and Abdul Rahman, Ismail and Azis, Noorul Azreen (2022) Ergonomics and manual handling workplace improvement: a case study of firefighter at Pagoh. In: Human-Centered Technology for a Better Tomorrow, 22 FEBRUARY 2021, KL.

Majeed, Ali Hussien (2022) Designing memory cells with a novel approaches based on a new multiplexer in QCA Technology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Marylin Migaa, Marylin Migaa and Yong Zi Yapa, Yong Zi Yapa and Jaharia, Puteri Nur Syahzanani and Sivachandran Parimannan, Sivachandran Parimannan and Heera Rajandas, Heera Rajandas and Latifr, Muhammad Abu Bakar and Yap Jing Wei, Yap Jing Wei and Shamsir, Mohd Shahir and Mohd Salleha, Faezah (2022) Complete mitochondria! genome data and phylogenetic analysis of the Great Marquis, Bassarona dunya (Doubleday, 1848) (Lepidoptera: Nymphalidae: Limenitidinae) from Malaysia. MITOGENOME ANNOUNCEMENT, 8 (1). pp. 164-171.

Marzuki, Muhammad Azfar Muqri and Nordin, Normayati and Mohamed Rasidi, Shamsuri (2022) Effect of inner wall curvature on loss characteristic and flow rectification of curved diffuser. Journal of Complex Flow, 4 (1). pp. 1-7. ISSN 2672-7374

Masduki, Masadliahani and Zakaria, Normah (2022) Items for measuring the construct of Workplace Oral Communication Skills (WOCS) amongst civil engineering students: step by step using Exploratory Factor Analysis (EFA). SOCIAL SCIENCES & HUMANITIES, 30 (1). pp. 209-227. ISSN 0128-7702

Masek, Alias and Mohd Salleh, Kahirol and Alias, Maizam (2022) A hybrid facilitation model for inexperienced students via integration of teacher-centred and student-centred roles. Journal of Engineering Education Transformations, 35 (2). pp. 156-164.

Masek, Alias and Muhammad Nurtanto, Muhammad Nurtanto and Nur Kholifah, Nur Kholifah and Mutohhari, Farid and Zainal, Rizal (2022) Learning skills from distance: a solar photovoltaic site survey from students’ view. International Journal of Information and Education Technology, 12 (8). pp. 725-731. ISSN 2010-3689

Masek, Alias and Paimin@Abdul Halim, Aini Nazura and Hashim, Suhaizal and Abdullah Abdullah, Nurhanim Saadah and Wan Muda, Wan Hanim Nadrah (2022) The role of knowledge, emotion, and intention in influencing students’ behaviors during COVID-19 pandemic. SAGE Open. pp. 1-13.

Maslazim, Norsahira and Sh Ahmad, Sh Salleh (2022) ARENA simulation training guideline for assembly line. In: Research Progress in Mechanical and Manufacturing Engineering.

Masrom, Nor Ratna and Tamam Daut, Badru At and Rasi, Raja Zuraidah and Lo, Wei Keong (2022) Innovation as mediating factor between total quality management and competitive advantage among manufacturers. International Journal for Quality Research, 16 (1). pp. 243-260. ISSN 1800-6450

Masruri, Muhammad and Borham, Abd Shakor and Abdul Rahim, Mohd Hisyam and Sulkhan Chakim, Sulkhan Chakim and Muhammad Faiz, Muhammad Faiz (2022) The approach of revelation of the Quran and al Sunnah to dealing with soul and mental disorders after the COVID-19 outbreak. International Journal of Academic Research in Business and Social Sciences, 12 (8). pp. 605-617. ISSN 2222-6990

Mat Hasan, Norsuhada (2022) Kepuasan kerja graduan hospitaliti terhadap ketekalan kerja di industri perhotelan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Hassan, Nik Normunira and Atil, Aida Atiqah and Roseli, Adyla Illyana and Raja Mamat, Tengku Nur Azila and Yusop, Fatimah Mohamed and Tuan Ismail, Tuan Noor Hasanah and Mohd Rus, Anika Zafiah and Marsi, Noraini and Sulong, Nurulsaidatulsyida and Mohammad Noor, Hafsa (2022) Determination of vibration transmissibility on slab track-bridge LRT Railway structure. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 81-94. ISBN 978-967-2817-40-6

Mat Isa, Najah and Razak, Aisyah and Haiqal, Aiman and Adzila, Sharifah (2022) Thermogravimetric analysis of polyhydroxyalkanoates (PHA)/nano-Calcium phosphate (nCaP)/chitosan biocomposite for heat-related manufacturing process. In: AIP Conference Proceedings.

Mat Jam, Nor Aishah and Puteh, Saifullizam (2022) Exploring the teaching and learning indicators towards education 4.0 in MTUN, Malaysia. International Journal of Information and Education Technology, 12 (2). pp. 179-184. ISSN 2010-3689

Mat Salleh, Mohamad Ariff (2022) The cause and effect of fall from height accidents and mitigation measures in Peninsular Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Serudin, Anisah and Mydin, Md Azree Othuman and Mohd Nawi, Mohd Nasrun and Deraman, Rafikullah and Sari, Marti Widya and Abu Hashim, Mohammad Firdaus (2022) The utilization of a fiberglass mesh–reinforced foamcrete jacketing system to enhance mechanical properties. Materials, 15. pp. 1-17.

Md Amin, Naqibah Solehah and Mohd Fauzi, Noor Akhmazillah and Mohamed, Elizah (2022) Biotechnology on biopolymer in automotive interiors. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 29-38.

Md Jamal, Norezmi (2022) Speech enhancement using deep neural network based on mask estimation and harmonic regeneration noise reduction for single channel microphone. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Nasrudin, Farah Suraya and Chang Phang, Chang Phang (2022) Numerical Solution via Operational Matrix for Solving Prabhakar Fractional Differential Equations. Journal of Mathematics and Statistics, 2022. pp. 1-7. ISSN 1549-3644

Md Nasrudin, Farah Suraya and Phang, Chang and Kanwal, Afshan (2022) Fractal-fractional advection–diffusion–reaction equations by Ritz approximation approach. Open Physics. pp. 1-8.

Md Som, Mohd Fairus and Abdullah, Mohd Fahmy and Rashid, Umi Kartini and Rahim, Mohd Bekri (2022) Implementation of entrepreneurship education in Malaysian Skills Certificate (MSC) training programme in Malaysia. Jundishapur Journal of Microbiology, 15 (1). pp. 2678-2687.

Md Yasser, Mona Alis (2022) XPS analysis on tribofilm formation study for metal sliding surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Yusoff, Muhammad Faiz and Jusoh, Nur Aniza Quantaniah and Abu Seman, Noor Aslinda (2022) Consumer satisfaction on the adoption of e-payment among millennials in Malaysia during Covid 19 pandemic. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 84-99. ISBN 978-967-2817-57-4

Md. Nasir, Muhamad Nadjmi and Tuan Ismail, Tuan Noor Hasanah and Yahya, Nur Faezah and Yusop, Fatimah Mohamed and Adnan, Suraya Hani and Abdullah, Nor Maizzaty and Mat Hassan, Nik Normunira (2022) A review of riverbank and coastal erosion protection structure. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 41-55. ISBN 978-967-2817-40-6

Md. Yusof, Zeety and Al-Adhami, Abdullah Mahgoob Yahya and Mohd Matore, Mohd Effendi Ewan (2022) Compressive strength of stabilised granitic residual soil using mixture of pineapple fibre—hydrated lime. Sustainability, 14 (3826). pp. 1-16. ISSN 2071-1050

Mechman, Ali and Omar, Siti Sarah and Hamawandy, Nawzad Majeed and Abdullah, Arshad Sedeeq and Qader, Abdulkhaleq Nader (2022) The effect of digital marketing, and e-commence on SMEs performance of Baghdad. Journal of Positive School Psychology, 6 (3). pp. 4197-4212.

Meerangani, Khairul Azhar and Abdul Hamid, Mohammad Fahmi and Hashim, Siti Nurul Izza and Sharif, Dziauddin (2022) Digital Platform Potential for Asnaf Zakat Entrepreneurs: A Systematic Literature Review. International Journal of Academic Research in Business and Social Sciences, 13 (1). 1184 -1199. ISSN 2222-6990

Megah S., Suswanto Ismadi (2022) Political speech texts of the Indonesian Presidents in the reformation era. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mehbodniya, Abolfazl and Haq, Mohd Anul and Kumar, Anil and Ismail, Mohd Erfy and Dahiya, Priyanka and Karupusamy, Sathishkumar (2022) Data reinforcement control technique‑based monitoring and controlling of environmental factors for IoT applications. Arabian Journal of Geosciences, 15. pp. 1-8.

Merunei, Nick Cassidy and Chew, Chang Choon (2022) Smart room system with remote access using MQTT. In: Evolution in Electrical and Electronic Engineering. Penerbit UTHM, UTHM, pp. 611-616.

Milala, Sani Inusa and Md Ariffin, Khadijah and Kasim, Rozilah (2022) Facilities management business opportunities. International Journal of Sustainable Construction Engineering and Technology (IJSCET), 13 (2). pp. 258-267. ISSN 2180-3242

Mishaal, Mohammed Faraj and Ho, Fu Haw (2022) Barriers in adopting technological innovation, organizational capacity, and business environment into Iraq SMEs: a preliminary study. In: Research Progress in Mechanical and Manufacturing Engineering.

Mohamad Malom, Ahmad Zaki and Awang Kechek, Nurul Nazihah (2022) Perbincangan kajian kebahagiaan dalam Islam dan pengaruhnya di tempat kerja. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 29-38. ISBN 978-967-2817-72-7

Mohamad Pauzi, Alif Aiman (2022) Implementation of Takagi Sugeno method as fuzzy logic control with multiple sensors on fire fighter robot prototype navigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Yazid, Nurulain Syuhada (2022) Optimization and characterization of ultrasonically treated jackfruit seed starch. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Abdou Mani (2022) Artificial neural network technique to predict the power output of photovoltaic for monocrystalline and polycrystalline. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Elizah and Adham, Nur Elmira Shafiqah and Mohd Esa, Nur Adilah Fitri and Abd Aziz, Mohd Haiqal (2022) Mutation in plant: key of successful agriculture industry. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 99-109.

Mohamed, Elizah and Jumadi, Nur Farah Nasuha and Azemi, Nur Asyiqin and Abd Aziz, Mohd Haiqal (2022) Genetically Modified Organisms (GMOs): cultured meat. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 87-98.

Mohamed, Elizah and Mohd Adnan, Nuraisha Syazwani and Abd Talib, Nur Idayu (2022) Bio-fertilizers application in agricultural biotechnology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 51-62.

Mohamed, Elizah and Mustafa, Nur Aqilah Zawani and Sani, Husna Izzati and Abd Aziz, Mohd Haiqal (2022) Performance of engineering plant virus resistance: miRNA gene silencing. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 39-50.

Mohamed, N. A. N. and Fuad, N. and Marwan, M. E. and Norazlin, Norazlin (2022) EEG pattern for stress condition during listening rock music and binaural beat sound. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 60-85. ISBN 978-967-2817-72-7

Mohamed, Nor Shamsiah and Jun Ham, Jun Ham and Ab-Rahim, Sharaniza and Cheng, Yee Low and Ching, Theng Koh (2022) Siam-weeb based gelatin electrospun scaffolds. Malaysian Journal of Microscopy, 18 (1). pp. 147-157. ISSN 1823-7010

Mohamed Alfzari, Saeed Mohamed Khalfan (2022) A framework of influencing factors for successful disaster management in United Arab Emirates (UAE). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Ali, Abdiladif (2022) A wearable circular polarized antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Rasidi, Shamsuri (2022) Development of subsonic curved diffuser performance correlations integrated angle of turns using asymptotic computational fluid dynamics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Zahir, Mohd Akram Zaki and Md Yunos, Yusri and Mazumi, Mazhaniza and Wahap, Ahmad Ridhwan and Wahid, Herman and Ahmad, Anita and Ramli, Mimi Faisyalini and Mohd Zain, Rasif (2022) Smart bus terminal using infrared identification. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 41-60. ISBN 978-967-2817-62-8

Mohammad Haidzir, Humaira and Abu Seman, Noor Aslinda and Harun, Amran (2022) Marketing macro environment during the pandemic Covid-19. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 39-47. ISBN 978-967-2817-57-4

Mohammad Khaled, Muhd Nur Danish Ikhwan and Abdul Rahim, Ruzairi and Sahlan, Shafishuhaza and Ahmad, Nasarudin and Mohamad, Elmy Johana and Mohd. Zain, Rasif and Wahid, Herman and Ahmad, Anita (2022) Automatic gate sensors. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 67-76. ISBN 978-967-2817-62-8

Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Borhana Omran, Abdoulhdi A. and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2022) Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films. Polymers, 15 (63). pp. 1-21. ISSN 2073-4360

Mohammed, Ali Ahmed (2022) Control and prediction of traffic crashes in the residential streets in Iraq using the expert system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Sahari, Mohammed Al-Sahari and Al-Gheethi, Adel Ali and Radin Mohamed, Radin Maya Saphira and G. Yashni, G. Yashni and N. Vo, Dai-Viet and Ismail, Norli (2022) Microbial fuel cell systems; developments, designs, efficiencies, and trends: A comparative study between the conventional and innovative systems. Chemosphere. pp. 1-15. ISSN 0045-6535

Mohammed Alashmoori, Abdulrahman Abdullah (2022) Prediction of global solar radiation using miso ARX model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Almulla Alshehhi, Abdulnaser Abdulla (2022) A framework for project management implementation process for improving the business performance of small and medium enterprises in the United Arab Emirates. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Hauashdh, Ali Hamid (2022) Development an integrated strategic framework for critical influential issues on building maintenance success in Malaysian Public Universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Saif, Yazid Abdullsameea (2022) A smart vision inspection system on step-NC machine with IOT Environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ab Halim, Mohd Firdaus and Sulaiman, Erwan and Jenal, Mahyuzie and Raja Othman, Raja Nor Firdaus Kashfi and Syed Othman, Syed Muhammad Naufal (2022) Preliminary analysis of eddy current and iron loss in magnetic gear in electric vehicle. International Journal of Electrical and Computer Engineering (IJECE), 12 (2). pp. 1161-1167. ISSN 2088-8708

Mohd Adi, Mohd Nazir (2022) Board effectiveness of Malaysian small and medium enterprises (SMEs). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Adnan, Raudah (2022) Exploring the state of social entrepreneurship in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Akhair, Siti Hajar (2022) The development of mixed-matrix membrane incorporated with reduced graphene oxide synthesized using murraya koenigii leaf for oil/water separation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Aripin, Ashuvila (2022) Optimisation of biopulping process by bacteria from rhynchophorus ferrugineus on empty fruit bunch for pulp industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Azman, Amier Asyraf and Mohammad Fouad Iskandar,, Haziq Iskandar and Muhammad Zaidi Leong, Muhamad Nur Hafiz Leong and Mohd Fauzi, Noor Akhmazillah (2022) The enhancement of plant disease resistance using CRISPR/Cas9 technology. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 1-12.

Mohd Faiz, Nur Sofurah and Mohamed, Maziana (2022) Internationalisation of curriculum delivery: complexities of english as an instructional language in a non-english culture. Asian Journal of University Education (AJUE), 18 (1). pp. 279-289.

Mohd Fauzi, Noor Akhmazillah and Mohamed, Elizah and Ahmad Soberi, Nurul Aini and Rosli, Nur Farah Aina (2022) Potential of abiotic stress resistance in plants induced by melatonin. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 63-74.

Mohd Hanifa, Rafizah (2022) Ethnic recognition system for Malay language speakers using gammatone frequency cepstral coefficients pitch (GFCCP) and pattern classification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Hanifa, Rafizah (2022) Ethnic recognition system for malay language speakers using gammatone frequency cepstral coefficients pitch (GFCCP) and pattern classification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ismail, Anis Zafirah (2022) Properties enhancement of electrodeposited-Cu2O-based homojunction thin film solar cell using etching treatment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, N. N. and Lee, M. F. (2022) LPG Mass Monitoring Scale with Automatic Gas Leakage Detector System. In: ICE4CT2021, 16th and 17th December 2021, VIRTUAL CONFERENCE.

Mohd Noor, Nur Nabilah and Kamaruzaman, Nur Hazirah and Adel Al-Gheethi, Adel Al-Gheethi and Radin Mohamed, Radin Maya Saphira and Md. Sohrab Hossain, Md. Sohrab Hossain (2022) Degradation of antibiotics in aquaculture wastewater by bio-nanoparticles: A critical review. Ain Shams Engineering Journal. pp. 1-18.

Mohd Nor, Farrah Husna (2022) Bioproduction of lipopeptides by dye decolourising bacteria and its roles in textile dye decolourisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Norzam, Muhammad Nur Aliff and Karjanto, Juffrizal and Md Yusof, Nidzamuddin and Hasan, Muhammad Zahir and Zulkifli, Abd Fathul Hakim and Ab Rashid, Ahmad Azad (2022) Analysis of user’s comfort on automated vehicle riding simulation using subjective and objective measurements. Automotive Experiences, 5 (2). pp. 238-250. ISSN 2615-6202

Mohd Safar, Noor Zuraidin (2022) Buletin Pusat Pembelajaran Berterusan Dan Apel Edisi 2/2022. [Bulletin]

Mohd Safuan, Syadia Nabilah (2022) White blood cell recognition for biomarker model using improved convolutional neural network (CNN). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Safuan, Syadia Nabilah and Md Tomari, Mohd Razali and Wan Zakaria, Wan Nurshazwani (2022) Cross validation analysis of convolutional neural network variants with various white blood cells datasets for the classification task. International Journal of Online and Biomedical Engineering, 18 (2). pp. 123-140.

Mohd Sukri, Nurul Syafuhah and Muhammad, Norhayati and Abdul Rahim, Nur Fazira (2022) Phytochemical contents and antioxidant properties of polyherbal effervescent tablets formulated with different effervescent agents. Research Journal of Chemistry and Environment, 26 (3). pp. 1-7.

Mohd Tahir, Abdussalam Al-hakimi and Abdul Rashid, Azrin Hani and Nasir, Siti Hana and Ahmad, Mazatusziha and Nor Anuwar, Anis Amirah (2022) Thermal resistance and bursting strength analysis of multilayer needle-punched bamboo/polyester nonwoven batt. THE JOURNAL OF THE TEXTILE INSTITUTE. pp. 1-13.

Mohd Tahir, Muhammad Faheem and Abdullah, Mohd Mustafa Al Bakri and Abd Rahim, Shayfull Zamree and Mohd Hasan, Mohd Rosli and Sandu, Andrei Victor and Vizureanu, Petrica and Ghazali, Che Mohd Ruzaidi and Abdul Kadir, Aeslina (2022) Mechanical and durability analysis of fly ash based geopolymer with various compositions for rigid pavement applications. Materials, 15. pp. 1-18.

Mohd Tarmizi, Fatin Amirah and Yasak, Zurina (2022) Development of application for augmented reality for three states of matter. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Mohd Yunos, Akmal Haziq and Azmir, Nor Azali (2022) Octave band technique for noise measurement at the source, path, and receiver of gas turbines in oil and gas facilities. Pertanika Journal of Science & Technology, 30 (1). pp. 725-745. ISSN 0128-7680

Mohd Yusof, Muhammad Nur Amirulhaq and Nasir, Nurul Fitriah (2022) Effects of reaction temperature and inlet velocity of a bubble column reactor on the bubble size for biodiesel production. In: Effects of Reaction Temperature and Inlet Velocity, 23 November 2021, Melaka, Malaysia.

Mokhtar, A. S. and Fuad, N. and Marwan, M. E. and Norazlin, Norazlin (2022) Electroencephalogram (EEG) pattern for human smoke habit. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 86-103. ISBN 978-967-2817-72-7

Mokhtar, Ikram Syah (2022) Pembangunan kerangka konsep penyertaan latihan : kajian kes staf akademik di universiti awam Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Nurfarah Barizah and Mohd Nawi, Nazri (2022) Sistem pengurusan kedai alatan komunikasi YY Photo Studio dan Teleshop. Applied Information Technology And Computer Science, 3 (1). pp. 1087-1102.

Mondal, Mithun and Didane, Djamal Hissein and Ali, Alhadj Hisseine Issaka and Manshoor, Bukhari (2022) Technical assessment of wind energy potentials in Bangladesh. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 10-21.

Mondal, Mithun and Didane, Djamal Hissein and Ali, Alhadj Hisseine Issaka and Manshoor, Bukhari (2022) Wind energy assessment as a source of power generation in Bangladesh. Journal of Advanced Research in Applied Sciences and Engineering Technology, 26 (3). pp. 16-22.

Mondal, Mithun and Didane, Djamal Hissein and Issaka Ali, Alhadj Hisseine and Manshoor, Bukhari (2022) Technical assessment of wind energy potentials in Bangladesh. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 96 (2). pp. 10-21.

Muhamad Sanusi, Amanina (2022) Kerangka kecemerlangan bakat bekerja dalam kalangan pelajar teknikal. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Zaini, Nurmahamira Zairani (2022) Causes of the tower crane accidents and safety performance practices at construction site in Malaysia: perspectives from tower crane operator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Sam’An, Muhammad Sam’An and Yosza Dasril, Yosza Dasril and Chandrasekar Ramasamy, Chandrasekar Ramasamy and Nazarudin Bujang, Nazarudin Bujang and Yahya Nur Ifriza, Yahya Nur Ifriza (2022) Improved Segregated Advancement (I-SA): a new method for solving full triangular fuzzy transportation problems. INTERNATIONAL JOURNAL OF MANAGEMENT SCIENCE AND ENGINEERING MANAGEMENT. pp. 1-12.

Musa, Masitah (2022) Student acceptance towards online learning management system based on UTAUT2 model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Mohd Kamaruzaman (2022) Pembangunan instrumen penilaian pasca penghunian bagi perumahan bertingkat yang dibina menggunakan kaedah sistem binaan industri. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Muhammad Yahaya (2022) An examination of competency required for secretaries in the North-Western Nigerian Colleges of Education. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Mohamad Zaid and Yamin, Noor Azlin and Abdul Razzaq, Abdul Rasid and Ahad, Rosnee (2022) Factors influencing job satisfaction in the Malaysian Vocational College: herzberg two factor theory perspective. Universal Journal of Management, 10 (1). pp. 18-25.

Mustafa, Mohd Syafiq Syazwan and Zakaria, Anies Faziehan and Che’Om, Siti Shaidatul Zarifah and Mohamed Yusop, Fatimah and Yunus, Faizal Amin Nur and Abdul Rahman, Mohammad Ashraf (2022) Predicting job satisfaction of Malaysian mechanical ventilation and air conditioning maintenance personnel in the oil and gas sector. Humanities and Social Sciences Letters, 10 (3). pp. 256-267. ISSN 2312-5659

Mustafa Al-Qaysi, Ali Abdulqader (2022) Enhancing the cooling system of a residential building using integrated building information modelling with solar absorption system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Musfirah and Hassan, Suhaimi and Mohammad Hisyammudden, Muhammad Syahmi and Jumari, Mohamad Zhairul Iqumal and Mat Nadir, Mohamad Amirul and Yusof, N M and Ikhsan, M S and Ismon, Maznan and Zakaria, Hanis and Marwah, Omar Mohd Faizan and Yusof, M S and Nik Aziz, Nik Nazmi Amir and Hakim, Mohd Farizwan Azmil and Abdul Rahman, Muhammad Fakrul Shakirin and Tabri, Ahmad Faidhi and Azmi, Mohd Azham (2022) Feasibility study of worker safety at highway emergency lane. In: 12TH INTERNATIONAL CONFERENCE ON MECHANICAL AND MANUFACTURING ENGINEERING 2022 (ICME22).

Mustaqim, Wan Ahmad and Zakhi, Ahmad and Mohd Nasir, Nur Fatehah and Hishamuddin, Fateen Shamsaiha (2022) Characterization and microstructure analysis of sodium alginate incorporate with iron (III) oxide for biomedical application. In: AIP Conference Proceedings.

Muttair, Albuhamdan Basim Saadoon (2022) Identity shift in South Asian and middle eastern selected novels. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

N

Naseeb Balmuralmansoori, Ahmed Hamad (2022) The effect of social media exposure towards fake news sharing behaviour in Abu Dhabi, UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nazri, Nurul Najihah and Manshoor, Bukhari and Zaman, Izzuddin and Didane, Djamal Hissein and Sayed Abdelaal, Muhammed Abdelfattah and Ibrahim, Mohd Nizam (2022) Velocity and shear stress distribution of laminar flow between parallel plate by laplace transform approach. Journal of Complex Flow, 4 (1). pp. 19-23. ISSN 2672-7374

Neo, Zhi Zing (2022) Polyphenol-mediated green synthesis of zinc oxide particles and their antibacterial properties: a novel size-controlled approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Chun Keat and Jumadi, Nur Anida (2022) IoT-based instrumentation development for reaction time, kick impact force, and flexibility index measurement. International Journal of Electrical and Electronic Engineering & Telecommunications, 11 (1). pp. 82-87.

Ng, Nicolas Yang Zu (2022) Performance evaluation of electrode fabricated by fused deposition modelling in die-sinking electrical discharge machining. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Yong Xian (2022) Optimal routh-hurwitz conditions and picard’s successive approximation method for system of fractional differential equations. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ngadiron, Zuraidah and Bachok, Syariah and Kamaluddin, N.A. (2022) Enhancing The CBTC System in Urban Rail Transit. In: International Conference on Multidisciplinary Engineering Technology i-CMETech.

Nik Ahmad, Nik Sahidah (2022) Hybrid firely and particle swarm optimisation algorithm for optimal dimming level and energy saving in lecturer’s room. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Soh, Nik Mohd Zaini (2022) The spring back effect of oil palm empty fruit bunch fibre on physical and mechanical properties of cement board. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ning Ting, Josephine Ong (2022) Prediction of ammonia and iron concentrations in water based on complementary double split-ring resonator (DSRR). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nizam, Mohd Khairul and Mohd Razmi, Mohamad Shafiq and Mohd Ramli, Najmuddin and Razali, Mohd Najib (2022) Formulation of food-grade grease using paraffin oil, fumed silica, and chitosan. Materials Science Forum, 1069. pp. 211-218. ISSN 1662-9752

Nomand, Efaq and Al-Gheethi, Adel and Radin Mohamed, Radin Maya Saphira and Talip, Balkis and Othman, Norzila and Hossain, Sohrab and N. Vo, Dai-Viet and Alduais, Nayef (2022) Inactivation of fungal spores from clinical environment by silver bio-nanoparticles; optimization, artificial neural network model and mechanism. Environmental Research, 204. pp. 1-15.

Noor Amran, Mohd Azlee (2022) Identification and modelling of two phase dc-dc boost converter based on autoregressive moving average with exogenous, output-error and transfer function model structures. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Azli, Mohamad Nor Azhari and Khasri, Muhammad Aidil and Hariri, Azian and Chong, Zi Yao and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2022) Pilot study on investigation of Thermal Sensation Votes (TSV) and students' performance in naturally ventilated classroom. Environment and Ecology Research, 10 (4). pp. 508-517.

Nor Salim, Nor Adrian and Asmuin, Norzelawati and Hariri, Azian and Sies, M. Farid and Zakaria, Hanis and Idris, Ahmad Fu’ad and Afandi, Azizi and Bosiran, M. Asrul and Taib, Ishkrizat and Tajul Arifin, Ahmad Mubarak (2022) Experimental investigation on filtration and cooling effect of kitchen hood ventilation system from water-mist recirculation spray: water mist spray cycle. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 90 (1). pp. 64-79. ISSN 2289-7879

Nordin, Muhammad Iqbal and Hasim, Muhammad Asyraf and Harun, Amran (2022) How consumers decide to buy during the pandemic Covid-19? In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 48-58. ISBN 978-967-2817-57-4

Norfarhanah, Mohamad Amin (2022) BULETIN PUSAT SUKAN UNIVERSITI EDISI 6/2022. [Bulletin]

Norhaimi, Norhafizah Azmi and Mohd Nawi, Nazri (2022) Sistem Pengurusan Logistik SISPA UTHM secara dalam talian. Applied Information Technology And Computer Science, 3 (1). pp. 789-802.

Nur, Abdul Hamid Busthami and Azid, Nurulwahida and Md-Al, Ruzlan and Nakman, Siti Jaizah and Tee Tze Kiong, Tee Tze Kiong and Yee Mei Heong, Yee Mei Heong (2022) Stop bullying: Evidence from an exploratory factor analysis of dominant bullying behaviors among Malaysian adolescent. International Journal of Evaluation and Research in Education (IJERE), 12 (1). pp. 236-244. ISSN 2252-8822

Nur Afiqah Md Samad,, Nur Afiqah Md Samad, and Nur Hanis Abdul Rahim, Nur Hanis Abdul Rahim and Mariam Firdhaus binti Mad Nordin*, Mariam Firdhaus binti Mad Nordin* and Angzzas Sari binti Mohd Kassim, Angzzas Sari binti Mohd Kassim (2022) RNA Interference (RNAi) for plants. In: CHEMICAL PROCESS AND SUSTAINABILITY IN AGRICULTURAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 75-86.

Nur Ali, Omar (2022) Design of triple band microstrip patch antenna for multipurpose application. Masters thesis, Universiti Tun Hussein Malaysia.

O

Obaid, Faisal Obaid and Ali, Maimunah (2022) Analysis of factors affecting efficiency of UAE e-government procurement system. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 195-202. ISSN 2180-3242

Obaid, Faisal Obaid and Ali, Maimunah (2022) Construction of PLS-SEM model of organisational factors affecting the Efficiency of Emarati Electronic Government Procurement Platform (EEGPP) implementation in UAE. International Journal of Sustainable Construction Engineering and Technology, 13 (2). pp. 8-24. ISSN 2180-3242

Oi Leng, Irene Liew and Toh, Hwee Ting and Mohammed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Vaccines for contagious diseases. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, pp. 57-74.

Omar, Noralina and Razak, Normahfuzah and Abu Bakar Ah, Siti Hajar (2022) Gelandangan: sekilas pandang komuniti terpinggir bandar. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 226-247.

Ong, Pauline and Chong, Tang Keat and Ong, Kok Meng and Low, Ee Soong (2022) Tracking of moving athlete from video sequences using fower pollination algorithm. The Visual Computer, 38. pp. 939-962.

Ong, Pauline and Tung, I-Chun and Ching, Feng Chiu and I-Lin Tsai d ,, I-Lin Tsai d , and Hsi, Chang Shih (2022) Determination of aflatoxin B1 level in rice (Oryza sativa L.) through near-infrared spectroscopy and an improved simulated annealing variable selection method. Food Control, 136.

Othman, Khairulnizam (2022) Quantification and segmentation of breast cancer diagnosis: efficient hardware accelerator approach. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohamad Khairi and Mohd Yaakob, Mohd Faiz and Fauzee, Mohd Sofian Omar and Zakaria, Normah and Abdullah, Shuhairimi (2022) Language of expert consensus: The indicator of student outcome according to Ibn Miskawayh’s theory using Fuzzy Delphi Technique application. Journal of Language and Linguistic Studies, 18 (1). pp. 59-79.

Othman, Muhammad Azri (2022) New data processing strategy for intelligent CNC machine tool controller using function block technology. Doctoral thesis, Universiti Teknikal Malaysia Melaka.

Othman, Raudhah and Dorin, Thomas and Stanford, Nikki and Hodgson, Peter (2022) The microstructure of high manganese TWIP steels produced via simulated direct strip casting. Materials Science and Technology Engineering. pp. 1-10.

Oyekunle, Adeleke Abdullahi (2022) Improved classifier chain methods based on heuristic optimization techniques for multi-label classification problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

P

Pahazri, Nor Fadzilah and Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Ramathasan Nagarajah, Ramathasan Nagarajah and Mohd Apandi, Affah and Mohd Radzuan, Rosmawanie and Shamine S. Moganathan, Shamine S. Moganathan (2022) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Pahazri, Nor Fadzilah and Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Ramathasan Nagarajah, Ramathasan Nagarajah and Mohd Apandid, Affah and Mohd Radzuan, Rosmawanie and Shamine S. Moganathan, Shamine S. Moganathan (2022) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Pahazri, Nor Fadzilah and Mohd Apandi, Najeeha and Saphira Radin Mohamed, Radin Maya and Nagarajah, Ramathasan and Mohd Apandi, Affah and Mohd Radzuan, Rosmawanie and S. Moganathan, Shamine (2022) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Pahazria, Nor Fadzilah and Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Nagarajah, Ramathasan and Mohd Apandi, Affah and Mohd Radzuan, Rosmawanie and S. Moganathan, Shamine (2022) Stryhnos potatorum and Pisum sativum as natural coagulant for meat food processing wastewater treatment: isotherm studies. SEPARATION SCIENCE AND TECHNOLOGY. pp. 1-16.

Pairan, M. Rasidi and Asmuin, Norzelawati and Mat Isa, Nurasikin and Sies, Farid (2022) Characteristic study of flat spray nozzle by using Particle Image Velocimetry (PIV) and ANSYS simulation method. In: 7th International Conference on Mechanical and Manufacturing Engineering.

Pairan, Mohamad Rasidi and Osman, Sharul Azmir and Md Nasir, , Ahmad Nabil and Noh@Seth, Nur Hazirah and Mohd Hisham, Mohd Hizwan and Mazlan, Adjah Naqkiah and Jambari, Hanifah and Aripin, Muhamad Afzamiman (2022) The blockage ratio effect to the spray performances. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). pp. 99-109.

Pairan, Mohamad Rasidi and Osman, Sharul Azmir and Md Nasir, Ahmad Nabil and Noh@Seth, Nur Hazirah and Mohd Hisham, Mohd Hizwan and Mazlan, Adjah Naqkiah and Jambari, Hanifah and Aripin, Muhamad Afzamiman (2022) The blockage ratio effect to the spray performances. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 95 (1). pp. 99-109.

Pakarzadeh, H. and Othman, N. and Tay, K. G. and Cholan, N. A. (2022) Two-pump parametric amplification in the presence of fiber dispersion fluctuations: a comparative study. Applied Optics, 61 (1). pp. 308-315.

Paramasivam, Revathi and Murugananthan, Yuggheshinie and Mohammed, Elizah and Mohd Fauzi, Noor Akhmazillah (2022) Development of human growth hormones. In: CHEMICAL PROCESS AND SUSTAINABILITY IN MEDICAL BIOTECHNOLOGY. Penerbit UTHM, UTHM, pp. 75-88.

Pauzi, Aslia Natasha (2022) Discrimination of zingiberaceae medicinal herbs Using analytical methods combined with chemometric techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Paya Martin, Marilyn (2022) Comparative sustainibilty evaluation on regenerated industrial nickel-cadmium battery based on life-cycle assessment method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pratik Kumar Singh, Pratik Kumar Singh and Shiau, Wei Chan (2022) The impact of electronic procurement adoption on green procurement towards sustainable supply chain performance-evidence from Malaysian ISO organizations. Journal of Open Innovation : Technology, Market and Complexity, 8 (61). pp. 1-27.

Q

Qasim, Abdullah Ali (2022) Low complexity of optical filter bank multi-carrier (FBMC) modulation for visible light communication using laser diode. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Qureshi, Suhail Asghar (2022) Double-layered metamaterial-based resonator operating at millimetre wave for detection of dengue virus. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Qureshi, Suhail Asghar and Zainal Abidin, Zuhairiah and A. Majid, Huda and Ashyap, Adel Y. I. and Chan, Hwang See (2022) Double-Layered metamaterial resonator operating at millimetre wave for detection of dengue virus. International Journal of Electronics and Communications, 146. pp. 1-9.

R

Rahim, A. A. A. and Fuad, N. and Marwan, M. E. and Norazlin, Norazlin (2022) EEG pattern of human calmness during listening to Al-Quran recitation and soft instrumental music. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 39-59. ISBN 978-967-2817-72-7

Rainanto, Bambang Hengky (2022) Environmental management system and pro-environmental behavior with green marketing mix as a mediator for sustainable industry performance in hotel industry in east Jawa Province, Indonesia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ramasamy, Suchitra (2022) Cracking evaluation of micro steel fibre (MSF) concrete by utilising acoustic emission signal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramdzan, S. N. and Mohamed, R. M. S. R. and Kamaruzaman, N. H. and A. Gheeti, A. A. S. and Hamdan, R. and Musa, Sabariah (2022) Pre-treatment of laundry greywater by steel slag for safe disposal. In: ICONCEES-2021, 15 & 16 November 2021, Virtual conference.

Ramli, Yahaya and Othman, Norazila and Yahaya, Nurulain and Mohamad, Mahmod Abd. Hakim (2022) Klasifikasi sumber bahan buangan. In: Teknologi Penggasan Terkini : Teori dan Uji Kaji. UTM Press, UTM, pp. 23-25.

Rashed Mohammed Alneyadi, Rashed Hamad (2022) The development of a structural Model for adoption references of M-government services. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rashed Salem Alkaabi, Rashed Juma (2022) The infrastructure development success model for public-private partnership in UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rasi, Raja Zuraidah and Rakiman, Umol Syamsyul and Raja Mohd. Radzi, Raja Zahilah and Masrom, Nor Ratna and Sundram, Veera Pandiyan Kaliani (2022) A literature review on blockchain technology: risk in supply chain management. IEEE ENGINEERING MANAGEMENT REVIEW, 50 (1). pp. 186-200.

Razali, Maryanti (2022) Simulation of GPR system operation using dipole antenna and AFW envelope detector technique for underground object detection application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Muhammad Razmi and Mohd Faudzi, Ahmad Athif and Shamsudin, Abu Ubaidah and Mohamaddan, Shahrol (2022) A hybrid controller method with genetic algorithm optimization to measure position and angular for mobile robot motion control. Robotic Control Systems, 9. pp. 1-14.

Razali, Nurul Aimi (2022) Kepimpinan autentik Mahathir Mohamad 1981-2003. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ridha Ali, Inas (2022) Mixed convection in a lid-driven enclosure filled with hybrid nanofluid by finite volume method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ridzuan, Mohd Baharudin (2022) Kajian potensi tanah liat, zeolit dan karbon teraktif sebagai penjerap komposit untuk merawat larut resapan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Risal, Noreen Nabilla (2022) Forecasting the ionospheric. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rodzalan, Shazaitul Azreen and Mohd Noor, Noor Nazihah and Abdullah, Nor Hazana and Saat, Maisarah Mohamed (2022) TVET skills gap analysis in electrical and electronic industry: perspectives from academicians and industry players. Journal of Technical Education and Training, 14 (1). pp. 158-177. ISSN 2229-8932

Rohanai, Reyanhealme and Ahmad, Muhammad Fazrulhelmi and Mohd Rameli, Mohd Rustam and Wan Hassan, Wan Azrul Shafuan and Abd Mutalib, Norathirah Nabila (2022) The attitudes of MTUN students towards m-learning usage during COVID-19 Pandemic. International Journal of Information and Education Technology, 12 (5). pp. 406-413.

Roslan, Nurul Hidayah (2022) Impact of building geometry factors on thermal comfort and energy performances of glass façade high-rise office buildings in hot and humid climate Malaysia. Doctoral thesis, Universiti Sains Malaysia.

Roslee, Noor Faiza and Mohd Kamil, Nor Amani Filzah and Abdul Kadir, Aeslina and Jalil, Abdul Rahim and Hamzah, Nurhidayah and Mohamed Noor, Norazian and Sandu, Andrei Victor (2022) New ray on remediation of high rings polycyclic aromatic hydrocarbons: remediation of raw petroleum sludge using solidification and stabilization method. Arch. Metall, 67 (4). pp. 1201-1208.

Rozali, Mohd Zulfadli and Puteh, Saifullizam and Nur Yunus, Faizal Amin and Hamdan, Nor Hidayah and Mohd Latif, Hadafi Fitri (2022) Reliability and validity of instrument on academic enhancement support for student-athlete using rasch measurement model. Asian Journal of University Education (AJUE), 18 (1). pp. 290-299.

Rudi, Nurul Nadia (2022) Banana blossom peels adsorbent for the removal of manganese in water. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rusli, Normaisarah and Mohd Nawi, Nazri (2022) Sistem E-Bajet Hira Katering. Applied Information Technology And Computer Science, 3 (1). pp. 1167-1185.

S

S., Suharno and S., Irmawan and H., Saputro and N., Agung Pambudi and J., Jumintono (2022) Improving students’ higher order thinking skills in learning health systems using mobile-based instructional approach. Health Education and Health Promotion, 10 (1). pp. 57-62. ISSN 2345-2897

S. Hakim, S. J. and M. Irwan, J. and W. Ibrahim, M. H. and S. Ayop, S. (2022) Structural damage identification employing hybrid intelligence using artificial neural networks and vibration-based methods. Journal of Applied Research and Technology, 20. pp. 221-236.

S.M. Johan, Siti Farhanah and Chan, Chee Ming (2022) Correlating permeability with drainage layer thickness overlying dredged marine clay in consolidation. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 1-94. ISBN 978-967-2817-40-6

Sabah Obaid, Qamar Mohamed (2022) The role of e-government services on intention to use with mediator effect of citizens’ satisfaction in the UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sadeq Abdullah Abdo Alkhadher, Sadeq Abdullah Abdo Alkhadher and Zakaria, Mohamad Pauzi and Suratman, Suhaimi and Tahani Y. A. Alanazi, Tahani Y. A. Alanazi and A. H. Al-Bagawi, A. H. Al-Bagawi and Sami M. Magam, Sami M. Magam and Najat Masood, Najat Masood and Abdul Kadir, Aeslina and Adel Al-Gheethi, Adel Al-Gheethi (2022) Assessment of Sewage Molecular Markers in Port Dickson Coast and Kim Kim River with Sediment Linear Alkylbenzenes. POLYCYCLIC AROMATIC COMPOUNDS. pp. 1-14.

Sadiron, Nazira and Kamaluddin, Mohammad Rahim and Che Mohd Nasir, Norruzeyati (2022) Penagih dadah dan orang kena pengawasan. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 107-127.

Sadli, Noorazah (2022) Kaedah pengajaran keusahawanan melalui penerapan ciri-ciri keusahawanan di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saeedmusallam Moqbil, Alrashdi Hamdan (2022) An integrated model of e-service quality and public satisfaction for smart city initiatives in the Abu Dhabi local government. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saif Murshed Almeqbaali, Salem Rashed (2022) Evaluating a relationship of factors affecting users’ satisfaction with mobile government services of Abu Dhabi Police. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saleh Al-Wajih, Ebrahim Qasem (2022) Threshold center-symmetric local binary convolutional neural networks for bilingual handwritten digit recognition. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saleh Almansoori, Maitha Taher (2022) Structural model of factors affecting pmo performance in uae mega construction projects. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salih Alhemairy, Zayed Hussain (2022) The influence of innovation practices on human capital development: the mediation role of innovation management. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Ali Mechman (2022) The moderating roles of digital marketing and e- commerce on the relationship between it business alignment factors and smes performance in Baghdad City of Iraq. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salleh, Muhammad Mohamed and Ghazali, Mohd Hafiz and Md Salleh, Salihatun and Manshoor, Bukhari and Khalid, Amir and Shiau, Wei Chan and Zaman, Izzuddin (2022) Parametric analysis of sound transmission loss in a rectangular duct attached with resonator silencer. International Journal of Nanoelectronics and Materials, 15. pp. 355-364.

Sallehuddin, Aina Mardia (2022) Development framework of work stress and technology absorptive capacity relationship among small and medium-sized enterprises (SMEs) in construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sami. Al-Alimi, Sami. Al-Alimi and Mohd. Amri. Lajis, Mohd. Amri. Lajis and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Yahya Altharan, Yahya Altharan and Djamal Hissein Didane, Djamal Hissein Didane and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher i (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.

Samsudin, Sheikh Saiful Azam (2022) Potentials of energy efficiency in a public hospital: a case Study in Hospital Kajang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sapaat, Azri Izani and Katimon, Mohd Nizam (2022) Simulation study of BACM mold respect to temperature distribution. In: Research Progress in Mechanical and Manufacturing Engineering.

Sauti, Noor Suhaiza (2022) GIS-based earthquake disaster management system for seismic risk assessment: a case study of Sabah and Pahang, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sazali, Norsuhailizah and Harun, Zawati and Abdullahi, Tijjani and Azhar, Faiz Hafeez and Ahmad, Azlinnorazia and Rasli, Nurul Izwanie and Sazali, Norazlianie (2022) Potential of transforming sodalite from synthesis kaolin with a mild condition of the hydrothermal method. Biointerface Research in Applied Chemistry, 12 (6). pp. 7376-7393. ISSN 2069-5837

Sazali, Norsuhailizah and Harun, Zawati and Abdullahi, Tijjani and Kamarudin, Noor Hasliza and Sazali, Norazlianie and Jamalludin, Mohd Riduan and Hubadillah, Siti Khadijah and Alias, Siti Salwa (2022) The route of hydrothermal synthesis zeolite a from the low grade Perak kaolin, Malaysia. Silicon, 14. pp. 7257-7273.

Sa’adan, Nadzrah and Taib, Siti Aishah and Saidalvi, Aminabibi and Ismail, Mohd Erfy (2022) Radio Drama in ESL Learning among Engineering and Business Students in UiTM Kampus Pasir Gudang. International Journal of Academic Research in Business and Social Sciences, 12 (5). pp. 1341-1351. ISSN 2222-6990

Sedik, Syazana Najiha and Mohd Kamaruddin, Nurul Hidayah (2022) Effect of blending parameters on physical properties of styrene-butadiene rubber coagulum modified asphalt binder. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 132-138.

Selimin, M. A. and A. Latif, A. F. and Er, Y. C. and Muhamad, M. S. and Basri, H. and Lee, T. C. (2022) Adsorption efficiency of banana blossom peels (musa acuminata colla) adsorbent for chromium (VI) removal. In: Materials Today: Proceedings.

Selimin, M. A. and A. Latif, A. F. and Lee, C. W. and Muhamad, M. S. and Basri, H. and Lee, T. C. (2022) Adsorption efficiency of hydroxyapatite synthesised from black tilapia fish scales for chromium (VI) removal. In: Materials Today: Proceedings.

Seman, M. A. and Syed Mohsin, S. M. and A. Zaidi, A. M. and Jaini, Z. M. (2022) Numerical investigation on reduced moment resistance and increased reinforcement spacing in reinforced concrete wall subjected to blast load. International Journal of Integrated Engineering, 14 (1). pp. 353-362. ISSN 2229-838X

Senin, Mohamad Syamir (2022) Mechanical, durability and damping properties for optimum rubberised concrete performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Senusi, Farasyafinaz and Mahmood, Salwa and Ngadiman, Nor Hasrul Akhmal and Mat Saman, Muhamad Zameri (2022) Application of GaBi software in identifying potential environmental impacts in fabrication of 3D bone tissue engineering. In: Proceedings of ICE-SEAM 2021, 23 November 2021, UTeM Melaka.

Sepeeh, Muhamad Syazmie (2022) Sensorless induction motor speed control for electric vehicles using enhanced hybrid flux estimator with ann-ifoc controller. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shaari, Abdul Muin (2022) Energy management study in indoor farming plant factory. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shaari Majed, Muhammad Amer Daneal and Abdullah, Dzul Izlee and Mohamed, Elizah and Abd Aziz, Mohd Haiqal (2022) Bio-based enzymes as source of chemicals and materials in industrial biotechnology. In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 67-80.

Sharif, Mohd Zamri (2022) Kesan model APMI terhadap tahap kemahiran berfikir secara kritis dan penyelesaian masalah pelajar dalam kursus teknologi elektrik 1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sharma, Abhishek and Singh Pali, Harveer and Kumar, Manish and Kumar Singh, Nishant and Abd Rahim, Erween and Singh, Yashvir and Kumar Gupta, Naveen (2022) Effect of α-aluminium oxide nano additives with Sal biodiesel blend as a potential alternative fuel for existing DI diesel engine. Energy & Environment. pp. 1-29.

Shoib, Abdul Rashid (2022) Study of wind energy potential at selected wind speed stations in Peninsular Malaysia using weibull distribution function. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sim, Pei Chin and Lee, Woon Kiow and Abdullah, Haslina and Talib, Norfazillah and Ong, Pauline and Saleh, Aslinda and Ahmad, Said and Sung, Aun Naa (2022) Prediction of tool wear using machine vision approach. ACADEMIC JOURNAL OF MANUFACTURING ENGINEERING, 20 (1). pp. 108-113.

Sivarajah, Vinod Kumar (2022) Comparison of diversity of nepenthaceae, orchidaceae and zingiberaceae in disturbed and undisturbed forests in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sockalingam, Kanageswary and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana (2022) Alteration of physico-mechanical properties of black tilapia scale gelatins using UVA and UVC irradiation. The International Journal of Integrated Engineering, 14 (1). pp. 150-156. ISSN 2229-838X

Soomro, Abdul Majid (2022) A hybrid routing approach for disaster management in manet. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Suarin, Nur Aisyah Syafinaz and Kim, Seng Chia (2022) Transferring near infrared spectroscopic calibration model across different harvested seasons using joint distribution adaptation. In: Control, Instrumentation and Mechatronics: Theory and Practice. Springer, pp. 707-716.

Subhi, Nasrudin and Ibrahim, Rozita and Mohamad, Mohd Suhaimi and Mohti, Azmah (2022) Kesejahteraan dan peminggiran Orang Asli Jakun Tasik Chini dalam menuju pembangunan lestari. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 89-106.

Subramaniam, Kamalleswaran (2022) Prediction of an electrically turbocharged engine and performance prediction in an actual drive cycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Nisamini (2022) Development framework of qlassic to improve defects identification in residential project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Dawlat Mustafa and Abdulazeez, Adnan Mohsin and Asaad Zebar, Dilovan and Zeebaree, Diyar Qader and Mostafa, Salama A. and Saleem Sadiq, Shereen (2022) An Attention-Based Deep Regional Learning Model for Enhanced Finger Vein Identification. Traitement du Signal, 39 (6). pp. 1-13. ISSN 1991-2002

Sulaiman, Nazrah Ilyana (2022) Unclad plastic optical fiber temperature sensor with a balloon-like structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Noralfishah and Ismail, Maziah and Nazir, Umber and Abdul Latib, Siti Kursiah Kamalia and Muhammad Hafidz, Haridzah Fatihini and Mahmud, Nur Putri Najwa and Abid, Sheikh Kamran (2022) MOBILISE-UTHM Resilient Tracker (RITTER) for resilient educational communities in Malaysia during the COVID-19 pandemic. International Journal of Social Ecology and Sustainable Development, 13 (8). pp. 1-4.

Sulaiman, Siti Mariam (2022) Methane potential from anaerobic co-digestion of sewage sludge and food waste in a stirred batch reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulau Padan, Cassandra and Su’ai @ Suani, Nur Ratna and Ruselan, Mohammad Fahmi and Nordin, Muhammad Daud and Raja Mamat, Tengku Nur Azila and Mahmood, Salwa and Mat Hassan, Nik Normunira (2022) Production planning improvement in a t-shirt printing company using Material Requirement Planning (MRP) approach: a case study. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 56-61. ISBN 978-967-2817-40-6

Sulistyo, Budi (2022) Development of an enterprise excellence index for indonesian state-owned enterprises using anp method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sulong, Nurulsaidatulsyida (2022) Photo-degradation of renewable biopolymer blended with thermoplastic high density polyethylene (HDPE). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sunthrasakaran, Nishanthi (2022) Conductivity and morphological characteristics of untreated and alkali treated natural fibre reinforced lldpe-nr polymer composite. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Supawi, Aiman and Ahmad, Said and Mohd Joharudin, Nurul Farahin and Karim, Fazida (2022) Surface integrity of RBD palm oil as a bio degradable oil based dielectric fluid on sustainable Electrical Discharge Machining (EDM) of AISI D2 steel. EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 9 (1). pp. 41-48.

Swaran Singh, Charanjit Kaur and Muhammad, Mazura Mastura and Mostafa, Nor Azmi and Noordin, Nooreen and Darmi, Ramiaida and Md Yunus, Melor and Tee, Tze Kiong and Masa Singh, Tarsame Singh (2022) Challenges and needs of ESL teachers in implementing portfolio assessment as alternative assessment in teaching English. Asian Journal of University Education (AJUE), 18 (3). pp. 710-723.

Syed Othman, Syed Muhammad Arif and Yasak, Zurina (2022) Development of an Online Zakat Application System. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

T

Taha, Mohamad Rafizi and Mohamad, Mimi Mohaffyza and Tee, Tze Kiong and Yee, Mei Heong and Ahmad, Adnan (2022) Tret personaliti dan faktor pemilihan kategori pekerjaan dalam kalangan pelajar kolej vokasional. Online Journal for TVET Practitioners, 7 (1). pp. 61-74.

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Marsi, Noraini and Raja Mamat, Tengku Nur Azila (2022) Improvement of facilities layout planning related with safety: a case study at quarry. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 62-80. ISBN 978-967-2817-40-6

Tajurahim,, Nurul Ainina Nadhirah and Mahmood, Salwa and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal (2022) Carbon footprint of 3D-printed bone tissue engineering scaffolds: an life cycle assessment study. International Journal of Environmental Science and Development, 13 (3). pp. 63-69.

Talib, Azman (2022) Enhancement of titanium dioxide (TiO2) dye-sensitized solar cells (DSSCs) performance with incorporation of reduced graphene oxide (rGO). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Norfazillah and Sabri, Ainaa Mardhiah and Jamaluddin, Nor Athira and Suhimi, Mohamad Hafiz Akmal and Abdul Sani, Amiril Sahab (2022) Effect of vegetable-based nanofluid enriched with nanoparticles as metalworking fluids during orthogonal cutting process. In: Proceedings of the 3rd Malaysian International Tribology Conference, 23 February 2022, Online.

Talib, Norfazillah and Sabri, Ainaa Mardhiah and Zolkefli, Ariff Azizi and Kai, Sheng Tan and Kunar, Sandip (2022) Tribological enhancement of modified jatropha oil by activated carbon nanoparticle for metalworking fluid application. Jurnal Tribologi, 33. pp. 113-124. ISSN 2289-7232

Tan, Jia Ying (2022) Property marketing strategy through digital platform of real estate agency in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tay, K.G. and Pakarzadeh, H. and Huong, Audrey and Othman, N. and Cholan, N. A. (2022) Gain prediction of dual-pump fiber optic parametric amplifier based on artificial neural network. Optik - International Journal for Light And Electron Optics, 253. pp. 1-15. ISSN 0030-4026

Tee, Tze Kiong and Abd Nasir, Nuraliah and Azid, Nurulwahida and Mohamad, Mimi Mohaffyza and Wu, Ming Chang and Swaran Singh4, Charanjit Kaur (2022) Issues and solutions on Inventive Problems-Solving Skills (IPSS) in invention course. Cakrawala Pendidikan Jurnal Ilmiah Pendidikan, 41 (2). pp. 468-480.

Tee, Tze Kiong and Ahmad Puad, Farah Najwa and Kamis, Arasinah and Yee, Mei Heong and Abd Hamid, Ruhiana Idayu and Shafie, Sharifah and Abu Bedor, Sarimah (2022) Enhancing cosmetology students’ communication skills in Malaysian upper secondary vocational education program. International Journal of Evaluation and Research in Education (IJERE), 11 (1). pp. 260-271. ISSN 2252-8822

Tee, Tze Kiong and Mohd Rusly, Noor Syuhaili and Abd Hamid, Ruhiana Idayu and Swaran Singh, Charanjit Kaur and Hanapi, Zaliza (2022) Inventive problem-solving in project-based learning on design and technology: a needs analysis for module development. Asian Journal of University Education (AJUE), 18 (1). pp. 272-278.

Tee, Tze Kiong and Ramlan, Aryati and Azman, Mohamed Nor Azhari and Bagus, Nur Rahma Putra Andika and Sukardi, Sukardi and Risfendra, Risfendra and Abd Hamid, Ruhiana Idayu (2022) Mastery issues and teaching approaches for the electrical technology certificate programme at community colleges on the topic of measuring instruments. Asian Pendidikan, 2 (1). pp. 1-7. ISSN 2735-2331

Teo, Wei She (2022) Social return on investment (SROI) for “New Permanent Housing” (RKB) project in Kuala Krai, Kelantan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tham, Cheong Sheng (2022) People, process and system design of smart office solution. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tighnavard Balasbaneh, Ali and Sher, Willy and Yeoh, David and Yasin, Mohd Norazam (2022) Economic and environmental life cycle perspectives on two engineered wood products: comparison of LVL and GLT construction materials. Environmental Science and Pollution Research. pp. 1-18. ISSN 26964–26981

Tsai, Kai Len (2022) Web-based bim project execution plan management system (WeB-MaS) for public works department Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuama, Alaa Nihad (2022) Thermally deposited silver-doped cuprous oxide solar cell on textured silicon and its devices modelling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Chik, Tuan Norhayati (2022) Assessment and optimisation of human walking and traffic induced vibration of floors in office buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Sembok, Tuan Muhammad Zukri and Mohd Ali, Adi Syahid (2022) Pendayaupayaan komuniti miskin melalui pendekatan modal sosial. In: Penyisihan Sosial Kumpulan Marginal. UUM Press, UUM, pp. 248-271.

Tukiman, Mohd Mustaqim (2022) The effect of ignition timing on engine performance and combustion behaviour of LPG-SI engine using lsi system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tukimon, Mohd Faizal and Abd. Rahman, Hamimah and Amirnordin, Shahrin Hisham and Yusop, Umira Asyikin and Jaidi, Zolhafizi and Ismail, Azzura and Ahmad, Sufizar and Mohd. Halil, Aiman (2022) Important parameters of laser welding for metallic materials interconnect in fuel cell: a short review. Malaysian Journal of Microscopy, 18 (1). pp. 158-176. ISSN 1823-7010

U

UNIT PENGURUSAN STRATEGIK DAN KORPORAT (2022) BULETIN PUSAT SUKAN UNIVERSITI EDISI 1/2022. [Bulletin]

UNIT PENGURUSAN STRATEGIK DAN KORPORAT, PUSAT SUKAN UNIVERSITI (2022) BULETIN PUSAT SUKAN UNIVERSITI EDISI 2/2022. [Bulletin]

UTHM, PPBA (2022) BULETIN CEC 2021. [Bulletin]

UTHM, PPBA (2022) BULETIN PPBA EDISI 1 | 2022. [Bulletin]

UTHM, PPBA (2022) BULETIN PPBA EDISI 2 | 2022. [Bulletin]

UTHM, PPBA (2022) BULETIN PPBA EDISI 3 | 2022. [Bulletin]

Ullah, Israr and Ullah, Rahmat and Amin, Muhammad and Abd Rahman, Rahisham and Khan, Aftab and Ullah, Nasim and Alotaibi, Sattam (2022) Lifetime estimation and orientation effect based on long-term degradation analysis of thermoset and thermoplastic insulators. In: Polymers. MDPI, pp. 1-16.

Umpi, Jerry and Khamidun, Mohd Hairul and Abdullah, Mohd Daud (2022) Assessment and mapping of ammonium concentration in swale around Faculty of Civil Engineering and Built Environment and G3 Lake, Universiti Tun Hussien Onn Malaysia, (UTHM). Journal of Advancement in Environmental Solution and Resource Recovery, 2 (1). pp. 35-3.

Unadam, Faridatul Asma and Mohamad, Mimi Mohaffyza (2022) Industrial training: challenges among students in construction industry. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ustadi, Muna Norkhairunnisak (2022) Halal supply chain: mediating role of intention on manufacturer’s behaviour to utilize halal transportation services. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

W

W. Z., Teoh and Hamdan, R. (2022) Feasibility study of agriculture by-product in removing heavy metals in wastewater through adsorption. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1492-1500.

Wahid, Herman and Omar, Azmi and Ismail, Mohd Fauzi and Ahmad, Nasarudin and Sahlan, Shafishuhaza and Mohamad, Elmy Johana and Abdul Wahab, Yasmin (2022) PLC design for automatic power transfer of 11kv switchgear. In: Sensor & Instrumentation System. Penerbit UTHM, UTHM, pp. 23-40. ISBN 978-967-2817-62-8

Wan Azlan, Wan Norliyana (2022) Development of gesture-controlled robotic arm for upper limb hemiplegia therapy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ismail, Wan Mohd Akmal Hakimi and Rudi, Muhamad Azri and Mohamed, Elizah (2022) The use of microorganisms in dairy products (butter). In: Chemical Process & Sustainability in Industrial Biotechnology. Penerbit UTHM, UTHM, pp. 51-66.

Wan Jusoh, Wan Amizah and Che Rosely, Noor Ain Najihah and Adnan, Suraya Hani and Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron (2022) The corrosion effect to metal structure influenced by microbial at oil and gas plant. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM, pp. 19-33. ISBN 978-967-2817-40-6

Wan Muhammad, Wan Nur Azrina and Mohamad, Md Nor Anuar and Tukimon, Mohd Faizal (2022) Characterization and heat transfer performance of quarternary nitrate based molten salts. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 97 (1). pp. 35-46.

Wan Zahari, Wan Ainaa Mardhiah (2022) Buletin Pusat Pengajian Umum dan Kokurikulum Edisi April-Jun 2022. [Bulletin]

Y

Yaacob, Afiqah (2022) Direct detection of low concentration uric acid in the visible light spectrum utilizing spectroscopy method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaakob, Maizatul Azrina and Omar, Mohd Azwadi (2022) BULLETIN INSTITUT KEJURUTERAAN INTEGRASI APRIL - JUN 2022. [Bulletin] (In Press)

Yaakob, Maizatulazrina and Omar, Mohd Azwadi (2022) Buletin Institut Kejuruteraan Integrasi (I2E) - Jan – March 2022. [Bulletin]

Yaakob, Maizatulazrina and Omar, Mohd Azwadi and A. Karim, Hamizza Sofea (2022) Buletin Institut Kejuruteraan Integrasi July-Sept 2022. [Bulletin] (Submitted)

Yaman, Siti Khalijah and Hassan, Padzil@Fadzil and Yusop, Nur Maisarah and Hashim, Nur E’zzati and Mohammad, Hairuddin and Abu Bakar, Hasniza (2022) Factors affecting quality in Construction Project Life Cycle (CPLC). International Journal of Integrated Engineering, 14 (1). pp. 322-335. ISSN 2229-838X

Yap, Wan Heong and Abas, Nor Haslinda and Rahmat, Muhamad Hanafi and Mohammad, Hairuddin (2022) Preventive measures of struck-by accidents at the construction site: Perspectives from construction personnel in Johor. INTERNATIONAL JOURNAL OF SUSTAINABLE Building Technology and Urban Development, 13 (2). pp. 165-176. ISSN 2093-761X

Yee, Mei Heong and Hamdan, Nuraffefa and Masran, Saiful Hadi and Ibrahim, Badaruddin and Tee, Tze Kiong and Kok, Boon Ching and Azid, Nurulwahida (2022) Needs analysis of thinking style and higher order thinking skills for solving problems in producing products. Online Journal for TVET Practitioners (OJ-TP), 7 (1). pp. 20-30.

Yuary Farradia, Yuary Farradia and Harun, Amran (2022) Covid-19 and ecotourism prospect: Malaysia and Indonesia perspectives. In: Advance in Marketing Research. Penerbit UTHM, UTHM, pp. 12-20. ISBN 978-967-2817-57-4

Yusof, Yusliandy (2022) Student evaluation on educator’s teaching: a retrospective study at Kolej Kemahiran Tinggi Mara Sri Gading (KKTMSG), Batu Pahat, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusop, Umira Asyikin and Abd Rahman, Nurul Farhana and Anak Lowrance, Yohannes Nyambong and Jaidi, Zolhafizi and Tukimon, Mohd Faizal and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Abd Rahman, Hamimah (2022) Effect of nb and zn element doping on barium strontium cobalt ferrite-based cathode for solid oxide fuel cell – a short review. Malaysian Journal of Microscopy, 18 (1). pp. 226-244. ISSN 1823-7010

Yusop, Umira Asyikin and Osman, Muhammad Nur Fikri and Jaidi, Zolhafizi and Azmi, Mohd Azham and Ismail, Azzura and Mahzan, Shahruddin and Tan, Kang Huai and Abd Rahman, Hamimah (2022) Characteristics of BSCF–SDCC–Ag composite cathode powder for low-temperature solid oxide fuel cell. In: AIP Conference Proceedings.

Z

Zahari, Fatin Nur Atikah (2022) Assessment on different animal preservation techniques based on systematic decision tree for the development of natural history gallery in Pulau Tinggi Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Alam, Muhd Nazrul Hisham and Kamaruddin, Mohd Johari and Adzila, Sharifah and Nordin, Normayati and Othman, Raudhah (2022) Solar-powered aquaponics prototype as sustainable approach for food production. Materials Today: Proceedings, 65. pp. 2953-2959.

Zainal Alama, Muhd Nazrul Hisham and Samsudin, Sani Amril and Kamaruddin, Mohd Johari and Zakaria, Zaki Yamani and Othman, Raudhah (2022) Introducing arduino as an effective online distance learning tool in final year project for chemical engineering student. ASEAN Journal of Engineering Education, 6 (1). pp. 69-82.

Zainal Badri, Siti Khadijah and Carissa Tang Muk Yung, Carissa Tang Muk Yung (2022) The perceived effects of spirituality, work-life integration and mediating role of work passion to millennial or gen Y employees’ mental health. Carissa Tang Muk Yung. pp. 1-18.

Zainal Badri, Siti Khadijah and Carissa Tang Muk Yung, Carissa Tang Muk Yung and Wan Mohd Yunus, Wan Mohd Azam and Abu Seman, Noor Aslinda (2022) The perceived effects of spirituality, work-life integration and mediating role of work passion to millennial or gen Y employees’ mental health. Research paper. pp. 1-18. ISSN 2040-8269

Zainol, Nur Zainatul Nadra and Siti Marpuah, Siti Marpuah and Fuad, N. and Abdul Khalim, Mustapahayuddin and Mohammad, Che Adenan (2022) Menyusuri khazanah warisan budaya: Kuda Kepang antara kesenian dan kepatuhan syariah. In: Penyelidikan Islam: Integrasi Ilmu Naqli dan Aqli. Penerbit UTHM, UTHM, pp. 111-116. ISBN 978-967-2817-72-7

Zakare, Hafizuddin and Alisibramulisi,, Anizahyati and Muhd Sidek, Muhd Norhasri and Newman, Aidan and Saari, Nadiah and Adnan, Suraya Hani and Mohd Bhkari, Norshariza (2022) The effect of Palm Oil Fuel Ash (POFA) and steel fiber addition to the mechanical properties of Ultra High Performance Concrete (UHPC). In: Proceedings of the 5th International Conference on Sustainable Civil Engineering Structures and Construction Materials, 8-9 December 2020, Virtual Conference.

Zakaria, Nur Hamizah and Sulong, Muhammad Suhaimi and Abdul Hamid, Norashikin (2022) Student satisfaction on service quality: a study at Malaysian public university. ANP JOURNAL OF SOCIAL SCIENCE AND HUMANITIES, 3 (1). pp. 33-41. ISSN 2773-482x

Zhi, Qian Phang and Mokhatar, Shahrul Niza and Albshir Budiea, Ahmed Mokhtar (2022) Effects of spent garnet on the compressive and flexural strengths of concrete. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 1948-1957.

Zi Yao, Chong and Nor Azli, Mohamad Nor Azhari and Hariri, Azian and Muhamad Damanhuri, Amir Abdullah and Mustafa, Mohd Syafiq Syazwan (2022) Preliminary Study on Student’s Performance and Thermal Comfort in Classroom. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 59-72. ISSN 2289-7879

Zolkifli, Nur Syazlin (2022) An implementation of regional descriptor and line roi in development of semi-automated strabismus detection system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Ikmal and Mokhatar, Shahrul Niza and Budie, Ahmed Mokhtar Albshir (2022) Performance of spent garnet as sand replacement in concrete at high temperature. Recent Trends in Civil Engineering and Built Environment, 3 (1). pp. 731-738.

Zulkifli, Nurul Nadwa and Abd Halim, Noor Dayana and Yahaya, Noraffandy and van der Meijden, Henny and Mohd Zaid, Norasykin and A. Rashid, Ana Haziqah and Hashim, Suhaizal (2022) Online reciprocal peer tutoring approach in Facebook: measuring students' critical thinking. International Journal of Emerging Technologies in Learning, 17 (5). pp. 16-28. ISSN 1868-8799

Zuraidi, Siti Nor Fatimah (2022) Pembangunan teknik instrumentasi baharu bagi penilaian keadaan bangunan muzium. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Thu Nov 21 22:26:08 2024 +08.

Export as	Atom RSS 1.0 RSS 2.0