Items where Year is 2016

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | W | Y | Z
Number of items: 125.

A

A Ibrahim Kutty, Nadira Mariam (2016) Simulation on passenger movement for LRT Kelana Jaya line KL Sentral station using Vissim software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Hamid, Rahimah and Zainun, Nazarudin and Mat Hassan, Yahya (2016) Siri sarjana minda jilid 2 : modal insan dari pelbagai perspektif. Penerbit UTHM. ISBN 978-967-0764-33-7

A. Khalid, Nur Hafizah and Hussin, Mohd W. and Mirza, Jahangir and Ariffin, Nur Farhayu and Ismail, Mohamed A. and Lee, Han-Seung and Mohamed, Azman and Putra Jaya, Ramadhansyah (2016) Palm oil fuel ash as potential green micro-filler in polymer concrete. Construction and Building Material, 102 . pp. 950-960. ISSN 0950-0618

Abbas, Zeyad Adnan (2016) Comparison study of sorting techniques in dynamic data structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Halim, Muhamad Rais (2016) Web transcript verification using dual check digit as secure number. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulaziz Al-Shalif, Abdullah Faisal (2016) The used of ureolytic and sulphate reduction bacteria to improve properties and self-healing of concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar, Bashir (2016) Understanding the influence of ICT on pedagogical practices in the teaching of electronics courses in Nigerian TVET institutions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar, Malala Abubakar (2016) Effects of voltage sag during starting of an induction motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adan, Nor Faezah (2016) Design a filter for harmonics caused by non-linear load and resonance caused by power factor correction capacitor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adnan, Noor Quratul Aine (2016) Acoustic performance of hybrid renewable polyurethane blended with synthetic epoxy foam with and without titanium dioxide filler upon irradiated exposure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Kamilah (2016) Asas perakaunan dalam perniagaan. Penerbit UTHM. ISBN 978-967-0764-50-4

Ahmad @ Mohamad, Md. Fauzi (2016) Basic statistical analysis for research : step by step analysis. Penerbit UTHM. ISBN 978-967-0764-51-1

Ahmed, Maryam Temitayo (2016) Test suite reduction in Android application using refactoring. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Mohamed Abdirashid (2016) Comparison and analysis between APD and PIN functionality in an optical communication system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Adam, Labeeb Mohammed (2016) Co-existence and interference investigation between LTE-TDD and LTE-FDD under the frequency band between 2500 to 2690 MHz for Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alaian, Ahmad Eshtiwey (2016) The development of a fixed wing aircraft analysis and design flight dynamic software. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Anwar Lashari, Saima (2016) Mammogram images classification based on fuzzy soft set. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Assi, Saad Ali (2016) Coverage enhancement in WCDMA cellular network using repeater and MAHS amplifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aziziuddin, Nazihan (2016) Performance evaluation of Pegasis and leach protocol using Matlab based simulation platform. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bachok @ Tunderang, Sallehuddin (2016) Development of time delay current controller using raspberry pi for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahrudin, Ida Aryanie (2016) A comparative study of user acceptance testing between modified waterfall model and extreme programming in small-scale project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bohari, Azuwien Aida (2016) Speed tracking of indirect field oriented control induction motor using neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Chieng, Hock Hung (2016) A genetic simplified swarm algorithm for optimizing n- cities open loop travelling salesman problem. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

Dawood, Mohammed Ahmed (2016) Improvement of power quality using unified power quality conditioner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Edukali Shibani, Wanis Mustafa and Zulkafli, Mohd Fadhli and Basuno, Bambang and Abdul Wahab, Abas (2016) Numerical analysis of a moving object in the air tunnel. International Journal of Mechanical & Mechatronics Engineering IJMME, 16 (03). pp. 72-78. ISSN 162503-7474

Erode Natarajan, Ashwin Kumar (2016) Heat transfer analysis of nanofluids with variable stream conditions using numerical approach – RKF45. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Farea Esmail, Bashar Ali (2016) Performance evaluation of DST-based FDMA systems for wireless communications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Goh, Kai Chen and Goh , Hui Hwang and Omar, Mohd Faizal and Toh, Tien Choon and Mohd Zin, Abdullah Asuhaimi (2016) Accidents preventive practice for high-rise construction. MATEC Web of Conferences, 47 (04004). pp. 1-6. ISSN 2261-236X

H

Hashim, Mohd Yussni (2016) Effect of alkali treatment conditions optimization on kenaf fiber polymer composite characterization. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Noraini (2016) A study of usability noise prediction model by using linear regression analysis for KTMB commuter between Shah Alam to Bukit Badak route. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hatab M Katy, Abdoasslam (2016) Measuring usability for application software using the quality in use integration measurement model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husaimi, M. Farid and Md Salleh, Salihatun and Ngali, Mohd Zamani and Siswanto, Waluyo Adi (2016) Temperature decrement rate of bath tub water for ice bath therapy. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7480-7484. ISSN 1819-6608

I

Ibrahim Al-Taie, Hatem Sabeeh (2016) Heat and mass transfer of nanofluid flow in the presence of variable stream conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Nuhu (2016) Flood occurrence, smart tunnel operating system and traffic flow: a case of Kuala Lumpur smart tunnel Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Mohd Erfy and Samsudin, Mohd Ali (2016) Permodenan faktor-faktor pencapaian sains TIMSS Malaysia. Monograph Series, 50 . Pusat Pendidikan Ilmu Pendidikan, Universiti Sains Malaysia, Universiti Sains Malaysia. ISBN 9789673992584

Ismail, Mohd. Azizan (2016) Permodelan keupayaan tenaga serapan bagi tiub pelindung laga menggunakan kaedah unsur terhingga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jafar, Nurul 'Ain (2016) A comparative study between PMFSM and HEFSM with iron flux bridges for HEV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamari, Suhailly (2016) Electrokinetic-assisted phytoremediation of heavy metal in riverbank soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jemali, Mohd Ali and Esa, Ahmad (2016) Kecerdasan emosi guru pelatih berasaskan latihan di IPGM. Jurnal Penyelidikan Pendidikan 2016 . pp. 95-100.

Jemali, Mohd Ali and Esa, Ahmad and Husain, Mohd Zairi (2016) Emotional intelligence based training in IPGM of trainee teacher. In: One Day International Join Conference on Teacher Education and Physical Education Teacher Education 2016. IPG, IPG Kampus Temenggung Ibrahim Johor & Prodi Pendidikan Jasmani Kesehatan dan Rekreasi Fakultas Pendidikan Olahraga & Kesehatan Universitas Pendidikan Indonesia, Bandung Indonesia, pp. 124-130. ISBN 2180-2270

K

K. Nagamany, Dharmasegaran (2016) A study of the causes and effects of abandoned residential projects in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid, Amir (2016) Penyediaan graf penyelidikan. Penerbit Universiti Tun Hussein Onn Malaysia. ISBN 9789670764535

Khalid, Noor Sakinah (2016) The effect of anatase on rutile TiO2 nanoflowers towards its photo-catalytic activity on cancer cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalid , Amir and Jaat, Norrizam (2016) Effects of ambient density on flow characteristics of biodiesel spray injection using computational fluid dynamics. ARPN Journal of Engineering and Applied Sciences, 11 (8). pp. 1-7. ISSN 1819-6608

Khalid , Amir and Zaman, Izzuddin and Mohd Tobi, Abd Latif and Manshoor, Bukhari (2016) New approach of dynamic vibration absorber made from natural fibres composite. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 1-6. ISSN 1819-6608

L

Laily, Suraya (2016) Performance evaluation of copper and graphite electrode in electrical discharge machine (EDM) of aluminium alloy LM6. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lau, Wei Khang (2016) A dual-watermarking with QR code against cropping and resizing attack. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Chin Sheng (2016) Outqual instrument for measuring expectation gap of outsourcing service quality in property maintenance and management. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lee , Wah Peng and Ng , See Seng and Toh , Tien Choon and Lim , Cheng Sim and Yong, Ching Khian and Goh, Kai Chen (2016) Quantity surveying undergraduates’ awareness on cost significant of high-rise condominium projects in Malaysia: the case of a private university in Malaysia. MATEC Web of Conferences, 47 (04012). pp. 1-5. ISSN 2261-236X

Ling, How Hua (2016) A comparison study on the carbon footprint between the proposed Kuala Lumpur - Singapore High Speed Rail and other transportation modes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M Katy, Abdoasslam Hatab (2016) Measuring usability for application software using the Quim model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mad Said, Mohd Jazlan (2016) Determination of shear wave velocity and shear modulus estimation of peat soil using seismic geophysical method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Malayandy, Sathiya Vaani (2016) Analysis of land use type pattern and light rail transit (LRT) ridership. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansur, Sity Aishah and Mieczkowska, Aleksandra and Flatt, Peter R. and Bouvard, Beatrice and Chappard, Daniel and Irwin, Nigel and Mabilleau, Guillaume (2016) A new stable GIP-Oxyntomodulin hybrid peptide improved bone strength both at the organ and tissue levels in genetically-inherited type 2 diabetes mellitus. Bone, 87 . pp. 102-113. ISSN 87563282

Masdar, Aizan (2016) Development of a wireless current controlled stimulator for individuals with spinal cord injury. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Hassan, Nik Normunira (2016) Characteristic of renewable polymer incorporated with stabilizer to characterize the endurance of ultra voilet irradiation exposure. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mat Nawi, Abdullah (2016) Effect of waste plaster of paris on physical and mechanical properties of ceramic pottery body. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Mohamed Mubin Aizat (2016) Design optimization of single-phase inner-rotor and outer-rotor hybrid excitation flux switching machine for EV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salih, Nurulazirah (2016) Design and development of coliform bacteria detection system integrated with microfluidic and optical absorbance measurement device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meftah, Khaled Alhadi (2016) A comparison of CK and martin’s package metric suites in predicting package reusability in open source object-oriented software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Sulzakimin (2016) Initial findings on knowledge transfer practices towards sustainable development at Malaysian local government. International Journal of Trend in Research and Development, 3 (4). pp. 1-3. ISSN 2394-9333

Mohamed, Sulzakimin (2016) Sustainable development : challenges for Malaysian local government. Penerbit UTHM. ISBN 978-967-0764-40-5

Mohamed, Sulzakimin (2016) The study of domestic waste collection at Samarahan, Sarawak, Malaysia. Asian Business Research, 1 (1). pp. 27-37. ISSN 24248479

Mohamed, Sulzakimin and Ta Wee , Seow (2016) Knowledge transfer practices for sustainable development: Malaysian local government. In: The International Conference on Sustainable Development and Livelihoods (ICSDL 2016), 26-28 August 2016, UMT, Kuala Terengganu, Terengganu, Malaysia.

Mohamed Azri, Nafhatun Amirrah (2016) Kajian ke atas kualiti udara dalaman koc tren bagi perkhidmatan monorel dan komuter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Salleh, Mohammad (2016) Vibration control of thin plate structure with attached dynamic vibration absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamud Arab, Abdifatah (2016) Fundamental study and optimization of outer-rotor hybrid excitation flux switching generator for grid connected wind turbine applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Effendi, Hana Nabila (2016) Improvement on SPOC+ test program with ambient test removal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kassim, Angzzas Sari and Mohd Aripin, Ashuvila and Ishak, Nadiah and Zainulabidin, Muhd Hafeez and Abang Zaidel, Dayang Norul Fairuz (2016) Oil palm leaf fibre and its suitability for paper-based products. ARPN Journal of Engineering and Applied Sciences, 11 (11). pp. 7364-7369. ISSN 1819-6608

Mohd Nassir, Siti Nor Idayu (2016) Pelaksanaan program transisi kerjaya (PTK) murid berkeperluan pendidikan khas (MBPK) masalah pembelajaran (MP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Safuan, Hamizah (2016) On travelling wave solutions of the diffusive Leslie–Gowermodel. Applied Mathematics and Computation, 274 . ISSN 0096-3003

Mohd Shaari, Mohd Syahmi (2016) Reducing magnetic flux leakage of linear induction motor by chamfering method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Thahrir, Muhamad Hafizi (2016) Attibutes of green building rating tool (GBRT) for Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Tobi, Abd Latif and Zaman, Izzuddin and Mustapa, Mohammad Sukri and Siswanto, Waluyo Adi and Mahzan, Shahruddin (2016) Case study: techniques for material characterisation of brass tensile testing fracture sample. ARPN Journal of Engineering and Applied Sciences, 11 (16). pp. 10128-10132. ISSN 1819-6608

Mohd Yusof, Maryam Jameelah (2016) Design, fabrication and measurement dual band microstrip bandpass filter using landa/4 short circuit stub intergrated with defected microstrip structure (DMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Zin, Nooradzianie (2016) Speed control of permanent magnet synchronous motor using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Suhaili (2016) Food chain model with competition interaction in an environment of a biotic resource. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Usman (2016) Impact of housing attributes on rental values of residential properties in Minna, Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nagentrau, M. and Siswanto, Waluyo Adi and Mohd Tobi, Abd Latif (2016) Predicting the sliding amplitude of plastic deformation in the reciprocating sliding contact. ARPN Journal of Engineering and Applied Sciences, 11 (4). pp. 2266-2271. ISSN 1819-6608

Nagentrau, M. and Siswanto, Waluyo Adi and Mohd Tobi, Abdul Latif (2016) The influence of linear kinematic hardening and non-linear combined isotropic-kinematic hardening plasticity model on sliding contact. International Journal of Mechanical & Mechatronics Engineering, 16 (4). pp. 83-88. ISSN 2227-2771

Narendra Raut, Ashwin and Pathrose Gomez, Christy (2016) Thermal and mechanical performance of oil palm fiber reinforced mortar utilizing palm oil fly ash as a complementary binder. Construction and Building Material, 126 . pp. 476-483. ISSN 0950-0618

Naser Frak, Anwar (2016) Comparison study of sorting techniques in static data structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Naser Frak, Anwar (2016) Comparison study on sorting techniques in static data structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nezere, Norhafizan (2016) Analisis penyerapan pembebanan serong terhadap tiub hibrid menggunakan kaedah unsur terhingga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ngali, Mohd Zamani and Ibrahim, N.S.S and Md Salleh, Salihatun and Siswanto, Waluyo Adi (2016) Single-camera motion capture system for netball team strategic tool. ARPN Journal of Engineering and Applied Sciences, 11 (14). pp. 8653-8657. ISSN 1819-6608

Nordin, Normayati (2016) Performance investigation of turning diffusers at various geometrical and operating parameters. PhD thesis, Universiti Teknologi PETRONAS (UTP).

Nordin, Normayati and Abdul Karim, Zainal Ambri and R. Raghavan, Vijay and Md Seri, Suzairin and Othman, Safiah (2016) Turning diffuser: development of performance correlations via asymptotic computational fluid dynamics technique. In: Research and Innovation Festival 2016, 14 November - 15 November 2016, Universiti Tun Hussein Onn Malaysia. (Submitted)

Nordin , Normayati and Abdul Karim, Zainal Ambri and Othman, Safiah and Raghavan, Vijay R. and Mohideen Batcha, Mohd Faizal and Hariri, Azian and Basharie, Siti Mariam (2016) Flow characteristics of 3-D turning diffuser using particle image velocimetry. In: 7th International Conference on Mechanical and Manufacturing Engineering, 1 - 3 August 2016, Jogjakarta, Indonesia.

O

Ong, Pauline and Zainuddin, Zarita (2016) Calibrating wavelet neural networks by distance orientation similarity fuzzy C-means for approximation problems. Applied Soft Computing, 42 . pp. 156-166. ISSN 15684946

Othman, Khairulnizam and Ismail, Suhairi (2016) Power generation piezoelectric vibration for sensor. ARPN Journal of Engineering and Applied Sciences, 11 (12). pp. 7622-7627. ISSN 1819-6608

P

Pathrose Gomez, Christy and Abdulazeez, U. Raji (2016) Benefits optimization through Ill-informed client competency acquisition and engagement in renovation works flow. Mediterranean Journal of Social Sciences, 7 (5). pp. 335-342. ISSN 20392117

Pathrose Gomez, Christy and Gambo, Muhammad (2016) Evaluation of special purpose vehicle organisation skill sets taxonomy for effective public-private partnership infrastructure project delivery. Journal of Construction in Developing Countries, 21 (1). pp. 147-165.

Philimon, Sheena Punai (2016) An alternative means of spectroscopic imaging for superficial wound healing process monitoring. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Ramlan, Rohaizan and Chan, Shiau Wei and Mokhtar, Rashidah and Sakeri, Nur Amirah (2016) Ranking and selection criteria of mobile services using analytic hierarchy process. In: Mobile and Wireless Technologies 2016. Lecture Notes in Electrical Engineering, 391 . Springer Singapore, pp. 151-160. ISBN 9789811014086

Raut, Ashwin Narendra and Pathrose Gomez, Christy (2016) Optimization of mix design of thermally efficient blocks using the process parameter approach. Journal of Materials in Civil Engineering . ISSN 08991561

Raut, Ashwin Narendra and Pathrose Gomez, Christy (2016) Utilization of waste as a constituent ingredient for enhancing thermal performance of bricks – a review paper. Indian Journal of Science and Technology, 9 (37). ISSN 09746846

Remali, Najihah (2016) Analisis potensi dan pemetaan risiko tsunami di pantai barat semenanjung Malaysia menggunakan sistem maklumat geografi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

Sa'adon, Shafizah (2016) Sound absorption characteristics of natural fiber filled in flexible foam upon UV irradiation exposure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabran, Siti Fatimah and Mohamed, Maryati and Abu Bakar, Mohd Fadzelly (2016) Ethnomedical knowledge of plants used for the treatment of tuberculosis in Johor, Malaysia. Evidence-based of Complementary and Alternative Medicine, 2016 . ISSN 17414288

Saedon, Nursyahidah (2016) Comparative study of the shrinkage characteristics of peat at south east Johore. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Nur Syahidah (2016) Toward green consumerism practices in Malaysia hotel industries. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salem Alwan, Yaser Hasan (2016) Development of an integrated model for adoption of management information systems in Yemeni telecommunication organizations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sanik, Mohd Erwan and Prasetijo, Joewono and Mat Nor, Ahmad Hakimi and Hamid, Nor Baizura and Yusof, Ismail and Putra Jaya, Ramadhansyah (2016) Analysis of car following headway along multilane highway. Jurnal Teknologi, 78 (4). pp. 59-64. ISSN 0127-9696

Saripan, Muhammad Sharil (2016) Development of a microfluidic dilution and infusion pump system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Seow , Ta Wee (2016) Senario pengurusan sisa pepejal di Malaysia. Penerbit UTHM. ISBN 978-967-0764-44-3

Shahri, Zarina (2016) Development of an environmental management framework for sustainable reuse of Malaysian dredged marine sediments. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sim, Sy Yi (2016) Efficiency optimization of a direct torque control (DTC) induction motor drive. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Siswanto, Waluyo Adi and Nagentrau, M. and Mohd Tobi, Abdul Latif and Tamin, M. N. (2016) Prediction of plastic deformation under contact condition by quasi-static and dynamic simulations using explicit finite element analysis. Journal of Mechanical Science and Technology, 30 (11). pp. 5093-5101. ISSN 1738-494X

Soomro, Hassan Ali (2016) A new structure of 12sS-8P hybrid excitation flux switching motor using segmental rotor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suardi, Mirnah (2016) Rapid premixing fuel-water-air injector in burner combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syed Othman, Syed Muhammad Naufal (2016) Design of outer rotor field excitation flux switching motor for direct-drive application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

T

Taujuddin, Nik Shahidah Afifi and Ibrahim, Rosziati and Sari, Suhaila (2016) Minimizing median difference quantization error for image compression. In: International Conference on ICT Convergence 2016, 19-21 October 2016, Jeju Island, South Korea.

Tey, Jia Sin and Goh, Kai Chen and Goh , Hui Hwang (2016) Challenges in selecting a sustainable landfill site in Malaysia. MATEC Web of Conferences, 47 (05021). pp. 1-7. ISSN 2261-236X

Tokeran, Mohd Faizal (2016) A case study of two participating companies on the impact of national dual training system (NDTS) implementation on teaching strategies. PhD thesis, Universiti Tun Hussein Onn Malaysia.

U

Usman, Hamza (2016) Homeowners’ perception on mortgage financing: a case of Bauchi metropolis Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wan Marzudi, Wan Noor Najwa (2016) Two element printed MIMO antennas for wireless applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Omar, Wan Ibtisam (2016) Investigation of the physical properties of cholesteryl ester liquid crystal and the interaction with cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Yusoff, Wan Zahari (2016) Managing property and facilities higher education institutions. Penerbit UTHM. ISBN 978-967-0764-39-9

Wong, Lai Yoong (2016) Development of a holistic internet marketing strategy framework (IMSF) in promoting medical tourism industry (MTI) in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yahya, Siti Asia (2016) Characterizations of Malaysia palf properties between hand scrapping and palf M1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yap, Hiung Yin (2016) Development of a microfluidic device and electronic infusion system to fabricate microcapsules of calcium alginate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yii, Ronny Shi Chin (2016) Simulation of different orifice geometries on premix injector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yonis Buswig, Yonis. M. (2016) Development of a double-input interleaved boost DC-DC converter. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zainal, Ahmad (2016) Model kelestarian program TVET berasaskan kompetensi pensyarah dan amalan lestari kolej vokasional. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zainun, Nazarudin and A.Hamid, Rahimah and Mat Hassan, Yahya (2016) Siri sarjana minda jilid 1 : modal insan dari pelbagai perspektif. Penerbit UTHM. ISBN 978-967-0764-32-0

This list was generated on Sun Mar 26 17:18:37 2017 MYT.