Items where Year is 2017

Up a level
Export as [feed] RSS 2.0 [feed] RSS 1.0 [feed] Atom
Group by: Creators | Item Type | No Grouping
Jump to: | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S | T | U | V | W | Y | Z
Number of items: 565.

Musa, Muhammad Yahaya (2017) A cognitive task approach on the influence of office automation software in secretarial practice. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A

A Rahman, Nurhimmah (2017) Keberkesanan penggunaan modul KUSMAPP dalam meningkatkan pencapaian matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A Razak, Aliff Hisyam (2017) Optimisation of silicone-based dielectric elastomer transducers by means of block copolymers – synthesis and compounding. PhD thesis, DTU Chemical Engineering.

A. B., M. Abdul-Latiff and Aifat, N. R. and Yaakop, S. and Md-Zain, B. M. (2017) A noninvasive molecular approach: Exploiting species-locus-specific PCR primers in defeating numts and DNA cross-contamination of cercopithecidae. The Journal of Animal & Plant Sciences, 27 (3). pp. 1015-1023. ISSN 10187081

A. B., Suriani and M. D., Nurhafizah and A. , Mohamed and Mamat, M. H. and M. F., Malek and Ahmad, M. K. and A., Pandikumar and Huang, N. M. (2017) Enhanced photovoltaic performance using reduced graphene oxide assisted by triple-tail surfactant as an efficient and low-cost counter electrode for dye-sensitized solar cells. Optik, 139 . pp. 291-298. ISSN 00304026

A. Kadir, A. and Sarani, N. A. and Zaman, N. N. and Abdullah, Mohd Mustafa Al Bakri (2017) Feasibility study on utilization of palm fibre waste into fired clay brick. AIP Conference Proceedings, 1835 (1). pp. 1-6. ISSN 15517616

A. Malik, R. and Abdullah, M. and Abdullah, S. and Homam, M. J. and Yokoyama, T. and Yatini, C. Y. (2017) Prediction and measurement of high frequency radio frequencies in peninsular Malaysia and comparisons with the international reference ionosphere model. Advanced Science Letters, 23 (2). pp. 1294-1298. ISSN 19366612

A. Rahman , Khairunnisa (2017) The development of energy efficiency estimation system for domestic housing by using quality function deployment approach. PhD thesis, Universiti Tun Hussein Onn Malaysia.

A. Samad, N.H and Idris, Mohd Safiee (2017) Co-curricular importance in secondary school. Educational Technology . pp. 47747-47751. ISSN 2229-712X

Ab Kadir, Muhammad Irfan and Mustapa, Mohammad Sukri and Siswanto, Waluyo Adi and Mahdi, Ahmed Sahib and Samsi, Mohd Arif (2017) Microstructural and physical characteristics of recycling aluminium chips AA6061/Al powder using powder metallurgy. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2619-2625. ISSN 09754024

Ab. Razak, Abdul Rafiq (2017) Removal of nutrients and heavy metals from domestic and industry using Botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Muhamad Azahar (2017) Good governance in National Solid Waste Management Policy (NSWMP) implementation: a case study in Kuala Lumpur. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Nor Haslinda and Anak Luju, Ernie Khumpai and Kariya, Norfarahayu and Tong, Ying Ghing and Hasmori, Muhammad Fikri (2017) Causes of fatal accidents due to fall of persons in Malaysian construction industry. In: Sustainable Construction and Building Technology. Penerbit UTHM, pp. 1-17. ISBN 9789670764863

Abd Ghaffar, Nurhaliza (2017) Keperluan latihan kontraktor kelas F dalam sektor pembinaan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamed, Noor Kamalia (2017) Study on photocatalytic performance of rutile phased TiO2 micro size rods/flowers film towards methyl orange degradation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Muhammad Faqhrurrazi (2017) Effect of liquid properties (water and lime juice) on spray characteristics of deflected flat spray nozzle (AL-75). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Nur Adilah (2017) Fundamental study of pulse electric field effects on HeLa cell cultured over extracellular matrix protein micropatterned surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Ramhuzaini and Sepehri, Nariman (2017) Experimental comparison between proportional and PWM-solenoid valves controlled servopneumatic positioning systems. Transactions of the Canadian Society for Mechanical Engineering, 41 (1). pp. 65-83. ISSN 03158977

Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Subki, A Shamsul Rahimi and Ahood, Abdul Latiff and Kadmin, Ahmad Fauzan and Naim @ Mohayat, Mohd Hariz and Ahmad, Mazran and Mohd Tah, Mohd Aliff (2017) Design of non destructive testing on composite material using parallel plate electrical capacitance tomography: a conceptual framework. Jurnal Teknologi, 79 (5-2). pp. 71-76. ISSN 21803722

Abd Razak, Saiful Izwan and Anwar Hamzah, Mohd Syahir and Foong, Choi Yee and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2017) A review on medicinal properties of saffron toward major diseases. Journal of Herbs, Spices & Medicinal Plants, 23 (2). pp. 98-116. ISSN 15403580

Abdi, Ahmed Nur Elmi (2017) MP4-Karver: carving of corrupted MP4 videos using ASMD repairing technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdol Rahman, Mohd Nasrull and Masood, Ibrahim and Awalludin, Nur Farahanim and Hassan, Mohd Fahrul (2017) Ergonomic risk factors associated with musculokeletal disorders in computer workstation. International Journal of Applied Engineering Research, 12 (7). pp. 1355-1359. ISSN 09734562

Abdol Rahman, Mohd Nasrull and Mohamad, Siti Shafika (2017) Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work. Work: A Journal of Prevention, Assessment & Rehabilitation, 57 (1). pp. 69-77. ISSN 10519815

Abdol Rahman, Mohd Nasrull and Muhamad Jaffar, Mohd Syahir (2017) Musculoskeletal symptoms and ergonomic hazards among room attendants in hotel industries. Human Factors and Ergonomics Journal, 1 (2). pp. 25-34. ISSN 25903705

Abdul Awal, A. S. M. and Wan Ibrahim, Mohd Haziman and Mohd Ali, Ahmad Zurisman and Hossain, M. Zakaria (2017) Mechanical properties and thermal behaviour of two-stage concrete containing palm oil fuel ash. International Journal of GEOMATE, 12 (32). pp. 166-175. ISSN 21862990

Abdul Aziz , Mohd Faisalluddin (2017) Faktor-faktor mempengaruhi niat untuk berkongsi pengetahuan dalam kalangan staf akademik di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Teknologi Malaysia.

Abdul Bakil, Siti Natrah (2017) Reducing sintering temperature of Claytan stoneware using two different fluxes (soda lime silicate and borax decahydrate). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hamid, Norhadilah (2017) Antedecents and impacts of collaboration in innovation commercialization performance. PhD thesis, Universiti Putra Malaysia.

Abdul Jamil , Muhammad Mahadi (2017) Biomedical engineering applications: cell engineering. Penerbit UTHM, Universiti Tun Hussein Onn Malaysia. ISBN 9789670764801

Abdul Latif, Abdul Afiff Fiqhry (2017) Experimental study of biomedical stainless steel 316L vibration assisted milling using retrofittable 1D UVAM worktable. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Hanif (2017) Acoustical characteristics of oil palm Mesocarp fibres. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Herlina and Zulkifli, Syahidah Nurani and Mohd Subha, Nurul Adilla and Abdul Rahim, Ruzairi and Zainal Abidin, Hafilah (2017) Water quality monitoring using wireless sensor network and smartphone-based applications: a review. Sensors & Transducers, 209 (2). pp. 1-11. ISSN 17265479

Abdul Rahman, Siti Norhaida (2017) Pendekatan gamifikasi dalam pengajaran dan pembelajaran terhadap murid tingkatan dua bagi topik ungkapan algebra. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Samad, Abdul Aziz and Mohamad, Noridah and Mohd Ali, Ahmad Zurisman and Ali, Noorwirdawati and Goh, Wan Inn and Hadipramana, Josef and Tee, Kong Fah (2017) Trends and development of green concrete made from agricultural and construction waste. In: Advanced Concrete Technology And Green Materials. Penerbit UTHM. ISBN 9789670764979

Abdulhameed, M. and Roslan, R. and Vieru, D. and Shafie, Sharidan (2017) Analytical and numerical solutions of oscillating flow at a trapezoidal pressurewaveform. Computational Mathematics and Modeling, 28 (2). pp. 195-207. ISSN 1046283X

Abdulhameed, M. and Vieru, D. and Roslan, R. (2017) Modeling electro-magneto-hydrodynamic thermo-fluidic transport of biofluids with new trend of fractional derivative without singular kernel. Physica A, 484 . pp. 233-252. ISSN 03784371

Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Ismail, Ahmad Fauzi and Takeshi , Matsuura and Harun, Zawati and A Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana and Rezaei, Masoud and Hubadillah, Siti Khadijah (2017) Carbon dioxide capture using a superhydrophobic ceramic hollow fibre membrane for gas-liquid contacting process. Journal of Cleaner Production, 140 (3). pp. 1731-1738.

Abdulhasan Al-Jarah, Ali Husam (2017) A centralized localization algorithm for prolonging the lifetime of wireless sensor networks using particle swarm optimization in the existence of obstacles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Haslina (2017) Pengoptimuman jarak laluan mata alat menggunakan algoritma koloni semut untuk proses pengisaran poket. PhD thesis, Universiti Kebangsaan Malaysia.

Abdullah, Muhamad Firdaurs (2017) Soil-roots performance of Pennisetum setaceum ‘Rubrum’ on mechanical soil strength. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Noorhaslinda (2017) Performances of axial energy absorptions of cylindrical woven kenaf fiber reinforced polyester composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Rosmahalil Azrol (2017) Motivasi penglibatan pelajar UTHM terhadap aktiviti kesukarelawan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Sharifah Sakinah (2017) Electrodeposition of nickel/copper multi-nanolayer by dual bath technique at ambient temperature. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Muhamad Subri (2017) Effect of argentum on development and properties of composite cathode La0.6Sr0.4Co0.2Fe0.8O3-δ – SDCC-Ag for low temperature solid oxide fuel cell (LTSOFC). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Norhaliza (2017) Mixed convection in an inclined lid-driven square cavity with sinusoidal heating on top lid. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2539-2544. ISSN 18196608

Abu Bakar, Siti Zulaikha (2017) A functional link neural network with modified cuckoo search for prediction tasks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abubakar Pindar, Zahraddeen (2017) PinTar: message authentication code based on quasigroup and permutation compression function. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Abuhamra, Suaad Ghait Abdarrahman (2017) Effect of storage temperature and duration on physico-chemical properties, microbial growth and nutritional composition of papaya and banana fruits. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Achari, N.S and Esa, Ahmad (2017) Extra-curricular activities lead to healthy social skills among students in Malaysia. Social Science . pp. 47729-47731. ISSN 2229-712X

Adamu, Mahmoud Auwal (2017) Synthesis and characterization of conducting polyaniline/iron oxide (PAni/Fe3O4) nanorods for immunosensing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Adeyemi , Adegbenga and Martin , David and Kasim, Rozilah (2017) The relevance of lean thinking to sustainable improvement of public office buildings in Nigeria. Journal of Engineering and Applied Sciences, 12 (6). pp. 1365-1376. ISSN 1816949X

Adnan, Suraya Hani and Hamdan, Rafidah and Othman, Norzila and Mohd Saman, Hamidah and Hashim, Nor Haslina and Jamellodin, Zalipah (2017) A new design of recycled concrete aggregate as a medium in an aerated filter treatment system for enhancing physico-chemical process of phosphorus removal from domestic wastewater. In: Advanced Technology Centre : Research and Innovation Series 1. Advanced Technology Centre (ATC), Faculty of Engineering Technology UTHM. ISBN 9789672110101

Adnan, Suraya Hani and Osman, Mohamad Hairi (2017) Concrete materials series 1. Penerbit UTHM, Universiti Tun Hussein Onn Malaysia. ISBN 9789670764849

Adnan, Wan Nurashida and Warman, Sarebah (2017) Extra-curricular activities affect students to develop social skills. Leadership Management . pp. 46034-46036. ISSN 2229-712X

Adon, Nur Atiqah (2017) Hardware implementation for cardiac electrical excitation and conduction using an FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ahmad Nur Aizat and Lee, Te Chuan and Ramlan, Rohaizan and Ahmad, Md. Fauzi and Husin, Norafifah and Abdul Rahim, Mustaqqim (2017) The hybrid lean system to improve manufacturing environment. In: 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17), 22 - 23 July 2017, Bella Vista Waterfront, Langkawi, Kedah.

Ahmad, Ahmad Nur Aizat and Lee, Te Chuan and Ramlan, Rohaizan and Ahmad, Md. Fauzi and Husin, Norafifah and Abdul Rahim, Mustaqqim (2017) Value stream mapping to improve workplace to support lean environment. In: 8th International Conference on Mechanical and Manufacturing Engineering 2017 (ICME’17), 22 - 23 July 2017, Bella Vista Waterfront, Langkawi, Kedah.

Ahmad, Hilton@Mohd Hilton and Supar, K and Romanye, A H (2017) XFEM modelling of open-hole woven fabric kenaf composite plates. In: AIP Conference Proceedings.

Ahmad, Ida Laila and Ahmad, Mohd. Ridzuan (2017) Tapered microchannel for multi-particles passive separation based on hydrodynamic resistance. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 628-635. ISSN 25024760

Ahmad, Masitah and Hussin, Norhayati and Zulkarnain, Syafiq and Mahdin, Hairulnizam and Md Fudzee, Mohd Farhan (2017) Factors influencing the use of social media in adult learning experience. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 579-588. ISBN 9783319512792

Ahmad, Mohd Jalil (2017) Pembangunan kerangka kompetensi pensyarah technical and vocational education and training (TVET) di Kolej Komuniti. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Noor Aliza and Saiful Bahry, Saiful Iswal and Md Ali, Zarina and Mat Daud, Azra Munirah and Musa, Sabariah (2017) Effect of flow resistance in open rectangular channel. MATEC Web of Conferences, 97 (01107). pp. 1-6. ISSN 2261236X

Ahmad, Noor Aqilah (2017) A comparative study on wear and corrosion behaviour of tungsten carbide-nickel and tungsten carbide-cobalt high velocity oxy-fuel (HVOF) for carbon steel blade. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nurul Fazika and Esa, Ahmad (2017) Early childhood education. Psychology . pp. 47787-47789. ISSN 229-712X

Ahmad, Shakila and Halim, Harliana and Syed Abu Bakar, Sharifah Khadijah and M. Khalid, Halimi and Zainol, Nur Zainatul Nadra and Saparudin, Intan Farhana and Ani, Fauziah (2017) Usaha pembinaan pusat jagaan Darul Wardah, Johor berdasarkan neraca Maqasid Syari’ah. In: Prosiding Persidangan Antarabangsa Kelestarian Insan 2017 (INSAN2017) Ayer Keroh, Malacca, Malaysia, 1– 2 November 2017, 1– 2 November 2017, Ayer Keroh, Malacca, Malaysia.

Ahmad, Zanariah (2017) Pembangunan modul pedagogi kelas berbalik berasaskan pembelajaran reflektif untuk politeknik premier. PhD thesis, Universiti Malaya.

Ahmad Kamaruddin, Saadi and Tolos, Siti Marponga and Pah, Chin Hee and Md Ghani, Nor Azura and Mohamed Ramli, Norazan and Mohamed Nasir, Noorhamizah and KSM Kader Ibrahim, Babul Salam and Huq, Mohammad Saiful (2017) The quadriceps muscle of knee joint modelling using hybrid particle swarm optimization-neural network (PSO-NN). Journal of Physics: Conference Series, 819 (012029). pp. 1-11. ISSN 16609336

Ahmad Latiffi, Nur Atikah and Radin Mohamed, Radin Maya Saphira and Mohd Apandi, Najeeha and Mohd Tajuddin, Ramlah (2017) Preliminary assessment of growth rates on different concentration of microalgae Scenedesmus sp. in industrial meat food processing wastewater. MATEC Web of Conferences, 103 (06010). pp. 1-9. ISSN 2261236X

Ahmad Saany, Syarilla I. and Mamat, Ali and Mustapha, Aida and Affendey, Lilly S. and A. Rahman, M. Nordin (2017) Syntax and semantics question analysis using user modelling and relevance feedback. International Journal on Advanced Science Engineering Information Technology, 7 (1). pp. 329-337. ISSN 20885334

Ahmed, Fuad Hassan (2017) Improving construction materials management practices in construction sites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Wurochekke Anwaruddin (2017) Phycoremediation of artificial bathroom greywater in village houses using microalgae Botryococcus sp. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ajala, Amkpa Job (2017) A study on thermal conductivity of six unexplored Nigerian clays for possible refractory and insulating materials. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Akram, Muhammad (2017) Characterization of an algebraic structure and its fuzzifications. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Al Allam, Allam Musbah (2017) Asphalt binder and mixture performance using Batu Pahat soft clay as modifier. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Al-Gheethi, A. A. and R. Mohamed, R. M. S. and Wurochekke, A. A. and N. R., Nurulainee and J., Mas Rahayu and M. K., Amir Hashim (2017) Efficiency of Moringa oleifera seeds for treatment of laundry wastewater. MATEC Web of Conferences, 103 (06001). pp. 1-8. ISSN 2261236X

Al-Subari, Saleh Nasser (2017) Online banking adoption among academicians at MTUN universities in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Noorwirdawati and Din, Norhasmiza and Sheikh Khalid, Faisal and Shahidan, Shahiron and Abdullah, Siti Radziah and Abdul Samad, Abdul Aziz and Mohamad, Noridah (2017) Compressive strength and initial water absorption rate for cement brick containing high-density polyethylene (HDPE) as a substitutional material for sand. In: IOP Conf. Series: Materials Science and Engineering.

Ali Nasir, Mohamed Saleh (2017) Modelling and analysis of facts devices for stability improvement in power system using MATLAB software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Ahmad Rizal (2017) Model ramalan permintaan perumahan mengikut kategori rumah di negeri Johor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Maizam and Mohd Hanifa, Rafizah and Bahrudin, Ida Aryanie and Surip, Miswan and Ibrahim, Zuraida and Roslan, Rosfuzah and Azhar, Aqilah Hidayah (2017) Preliminary investigation on multi-modal approach for teaching social interaction skills to autistic children. The Social Sciences, 12 (5). pp. 749-754. ISSN 18185800

Alias, Maizam and Mohd Salleh, Kahirol and Mohd Tahir, Mashirnani (2017) Developing an instrument for assessing learning efforts among engineering students. Pertanika Journal of Social Sciences & Humanities (25). pp. 223-232. ISSN 0128-7702

Alshameri, Badee (2017) Combining seismic and geotechnical methods to improve the prediction of physical soil properties. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Al‑Gheethi, A. A. and Mohamed, R. M. and Efaq, A. N. and Norli, I. and Adib, M. R. and Amir, H. M. K. (2017) Reduction of bacteria in storage system of sewage effluents. Sustainable Water Resources Management, 3 (2). pp. 193-203. ISSN 23635037

Ambar, Radzi and Zakaria, Muhammad Faiz and Ahmad, Muhammad Shukri and Muji, Siti Zarina and Abd Jamil , Muhammad Mahadi (2017) Development of a home-based wrist rehabilitation system. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3153-3163. ISSN 20888708

Amin, Md Ruhul (2017) Self-synchronized converter for fast synchronization between low voltage microgrid and inverter connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amin, Md Ruhul and Zulkifli, Shamsul Aizam (2017) Modelling of virtual synchronous converter for grid-inverter synchronization in microgrids applications. International Journal of Power Electronics and Drive System (IJPEDS), 7 (4). pp. 1377-1385. ISSN 20888694

Amin, Md. Ruhul and Zulkifli, Shamsul Aizam (2017) A framework for selection of grid-inverter synchronisation unit: harmonics, phase-angle and frequency. Renewable and Sustainable Energy Reviews, 78 . pp. 210-219. ISSN 13640321

Amin, Mohamad Ariff and Abas, Nor Haslinda and Shahidan, Shahiron and Abd Salam, Nur Nasuha (2017) A case study on the safety management of the mass rapid transit (MRT) construction project at Klang Valley. In: Sustainable Construction and Building Technology. Penerbit UTHM. ISBN 9789670764863

Aminnuddin, Hazim Fadli and Abdullah, Mohammad Kamil (2017) Numerical investigation on pitch distance, compound angle and turbulence intensity of double cylindrical film cooling hole geometry. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2503-2508. ISSN 18196608

Aminnuddin, Mohd Hazim Fadli (2017) Simulation and experimental study of double holes film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amran, Nur’izzati Aqirah (2017) Domain hasil pembelajaran berasaskan kerja (PBK) dalam latihan industri terhadap pelajar politeknik berdasarkan persepsi pembimbing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Andsaler, Adiba Rhaodah (2017) Simulation of variant ambient condition and injection pressure on mixture formation of biodiesel spray. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ang, Peniel Soon Ern and Kasim, Narimah and Abd Hamid, Zuhairi and Goh, Kai Chen (2017) Critical ICT-inhibiting factors on IBS production management processes in the Malaysia construction industry. In: World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS, 12–16 June 2017, Prague, Czech Republic.

Ang, Peniel Soon Ern and Lim, Mei Ling and Kasim, Narimah and Abd Hamid, Zuhairi and Masrom, Md Asrul Nasid (2017) Thermal performance of precast concrete sandwich panel (PCSP) design for sustainable built environment. In: World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS, 12–16 June 2017, Prague, Czech Republic.

Ani, Fauziah and Suhaimy, Khairul Azman and Damin, Zahrul Akmal and Jaes, Lutfan and Johar, Siti Sarawati (2017) Pendekatan pendayaupayaan dalam pembangunan komuniti. In: Pendayaupayaan Bahasa, Agama dan Transformasi Masyarakat. Penerbit UTHM, pp. 166-189.

Anis, Mohd Aris (2017) Ujaran berimplikatur dalam teks Sulalatus Salatin. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Anwar Lashari, Saima and Ibrahim, Rosziati and Senan, Norhalina and Yanto, Iwan Tri Riyadi and Herawan, Tutut (2017) Application of wavelet de-noising filters in mammogram images classification using fuzzy soft set. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 529-537. ISBN 9783319512792

Ariffin, A. and Samsudin, M. A. and Md. Zain, A. N. and Hamzah, N. and Ismail, M. E. (2017) Effects of using graphics and animation online problem-based learning on visualization skills among students. In: Mechanical Engineering, Science and Technology International Conference 2017, 19–20 April 2017, Johor Bahru, Malaysia.

Ashyap, Adel Y. I. and Zainal Abidin, Zuhairiah and Dahlan, Samsul Haimi and A. Majid, Huda and Kamarudin, Muhammad Ramlee and Abd-Alhameed, Raed A. (2017) Robust low-profile electromagnetic band-gap-based on textile wearable antennas for medical application. In: 2017 International Workshop on Antenna Technology: Small Antennas, Innovative Structures, and Applications (iWAT), 1-3 March 2017, Athens, Greece.

Atan, Hood and Ramly, Edly F. and Mohammad, Musli and Yahya, Mohd Shahir (2017) A review of operational risk management decision support tool. In: Seventh International Conference on Industrial Engineering and Operations Management, 11-13 April 2017, Rabat, Morocco.

Atiku, Hauwa Maijidda (2017) Harvesting of microalgae Botryococcus sp. through phycoremediation of bathroom greywater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2017) QoS based admission control using multipath scheduler for IP over satellite networks. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 2958-2969. ISSN 20888708

Austad, Azhan and Mat Nayan, Nadirul Hasraf and Abd Razak, Saiful Izwan (2017) Conductive kenaf/polyaniline sheets for electrostatic dissipation and electromagnatic interferance shielding packaging. Cellulose Chemistry and Technology, 51 (1-2). pp. 83-89. ISSN 05769787

Ayob, M.L and Esa, Ahmad (2017) Technical and vocational education sustainable development. Educational Technology . pp. 47752-47758. ISSN 2229-712X

Ayob, Mohd Erdi (2017) Characterization of the measurement uncertainty for the electromagnetic conducted and radiated emission test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ayop, Osman and A. Rahim, Mohamad Kamal and Murad, Noor Asniza and Samsuri, Noor Asmawati and Zubir, Farid and A. Majid, Huda (2017) Dual-band metamaterial perfect absorber with nearly polarization-independent. Applied Physics A, 123 (63). pp. 1-7. ISSN 14320630

Ayop, Sallehuddin Shah (2017) Assessment of residual strength of corrosion damaged concrete structures. PhD thesis, Heriot-Watt University.

Azemi, Amira Eleza and Hashim , Nurul Hafizah and Nordin, Nur Fatin Nadiah and Esa, Ahmad (2017) Leadership soft skills and co-curriculum management for university graduates. Social Science . pp. 44434-44436. ISSN 2229-712X

Azim, M A M and Azhar, A T S and Tarmizi, A K A and Shahidan, S and Nabila, A T A (2017) Enhancing the compressive strength of landfill soil using cement and bagasse ash. In: IOP Conf. Series: Materials Science and Engineering.

Azis, N. Hafizah and Rahim, M. Zulafif and Sa'ude, Nasuha and Rafai, N. and Yusof, M. S. and M. Tobi, A. L. and Sharif, Z. M. and Ibrahim, M. Rasidi and Ismail, A. E. (2017) The influence of injection molding parameter on properties of thermally conductive plastic. IOP Conference Series: Materials Science and Engineering, 203 (012018). pp. 1-9. ISSN 1757899X

Azizan, Mohd Fikri (2017) A comprehensive fractal approach in determination of the effective thermal conductivity of gas diffusion layers in polymer electrolyte membrane fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Syuhada and Abd Razak, Saiful Izwan and Abdul Kadir, Mohammed Rafiq and Iqbal, Nida and Hassan, Rozita and Mat Nayan, Nadirul Hasraf and Abdul Wahab, Abdul Hadi and Shaharuddin, Shahrulzaman (2017) Reinforcement of poly(vinyl alcohol) hydrogel with halloysite nanotubes as potential biomedical materials. Soft Materials, 15 (1). pp. 45-54. ISSN 15394468

Azren, M. and Mat Isa, N. and Sadikin, A. (2017) The flow behaviour study of splitting device for horizontal pipeline. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3161-3164. ISSN 18196608

B

Baba, Habu Mallam (2017) Framework of property rating practice for financing neighbourhood facilities provision in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Bahari, N A A S and Shahidan, Shahiron and Abdullah, S R and Ali, Noorwirdawati and Mohd Zuki, Sharifah Salwa and Wan Ibrahim, M H and Rahim, M A (2017) Crack classification in concrete beams using AE parameters. In: IOP Conf. Series: Materials Science and Engineering.

Baharom, N and Idris, Mohd Safiee (2017) The roles of co-curricular in promoting students human capital development. Educational Technology . pp. 47664-47666. ISSN 2229-712X

Bahrim, Fatihah Shafiqah (2017) Cogging torque reduction of 6S-4P spoke-type IPMSM using a new combination of rotor design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahrudin, Ida Aryanie and Abdul Hamid , Mariam and Mohd Dzulkifli, Syarizul Amri and Abdullah, Mohd Ezree (2017) Introduction of database concept courseware evaluation using one-group pre-test post-test experimental design. Advanced Science Letters, 22 (12). pp. 1-5. ISSN 1936-6612

Bahrudin, Ida Aryanie and Abdullah, Mohd Ezree and Jofri, Muhamad Hanif and Zulkainain, Nur Afrina Huda and Mazlan, Nurul Fatienul Ain and Ibrahim, Nur Syafiqah Najwa and Surip, Miswan and Mohamed Ali @ Md Hani, Mohd Hatta and Abdul Hamid, Mariam and Md. Yasin, Mohd Suhaimi (2017) EQ-Tajweed: engaging learners to learn tajweed through the use of mobile apps. In: International University Carnival on E-Learning IUCEL 2017, 26-27 September 2017, Nilai, Negeri Sembilan.

Banging, Ida Sheha and Idris, Mohd Safiee (2017) Student participation in co-curriculum: why it is important? Student Participation in Co-curriculum: Why it is Important? . pp. 47179-47180. ISSN 2229-712X

Basir, Hassan and Alias, Maziam and Mohd Saleh, Khairol and Halizah , Awang (2017) Students’ perceptions of their teachers’ performance in teaching engineering drawing in Nigerian Tertiary Institutions. Traektoriâ Nauki = Path of Science, 3 (10). pp. 3001-3012. ISSN 2413-9009

Basir, Nor Farhana (2017) Penguasaan kompetensi komunikasi interpersonal pelajar kejuruteraan Politeknik Ibrahim Sultan Johor Bahru. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basri, Hatijah and Irfan, Masooma and Irfan, Muhammad and Lau, Woei-Jye and Kartohardjono, Sutrasno (2017) Quantitative analysis of MWCNT agglomeration in polymeric-based membranes using atomic force microscope. Surface and Interface Analysis, 49 . pp. 55-62. ISSN 10969918

Basri, Kasbi (2017) Characterization of soft soil using multi-channel analysis of surface waves (MASW) and electrical resistivity method (ERM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bello, Muhammad Umar and Ahmad Aliyu, Aliyu and Martin , David Juanil and Kasim, Rozilah (2017) Real estate investment as a panacea for economic instability in Nigeria: evidence from Northeastern States of Nigeria. Traektori� Nauki = Path of Science, 3 (8). pp. 1-6. ISSN 2413-9009

Bello, Muhammad Umar and Martin , David and Kasim, Rozilah and Abubakar, Muhammad and Umar, Muhammad Akilu (2017) An examination of relationship between quality municipal services and citizen satisfaction in Malaysian Local Council, Batu Pahat in perspective. Traektori� Nauki = Path of Science, 3 (5). pp. 1-4. ISSN 2413-9009

Bogelil, Mohamed.B.E. (2017) Phytoremediation of Sembrong river waters using Neptunia oleracea and Pistia stratiotes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Buhari, Mamman Hassan (2017) Optimization of low amplitude pulse electric field exposure on colon cancer cell for wound healing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Burhannuddin, Dirman Hanafi and Suid, Mohd Syafiq and Ribuan , Mohamed Najib and Omar, Rosli and M. Than, M. Nor and Rahmat, M. Fua’ad (2017) Speed effect to a quarter car ARX model based on system identification. International Journal on Advanced Science, Engineering and Information Technology, 7 (2). pp. 468-474. ISSN 24606952

C

Chan, Shiau Wei and Ahmad, Md Fauzi and Kong, Mei Wan (2017) The impact of soft factors on quality improvement in manufacturing industry. In: International Research and Innovation Summit (IRIS2017), 6-7 May 2017, Kings Green Hotel, Melaka.

Chan, Shiau Wei and Tasmin, R. and A. H. , Nor Aziati and Rasi, Raja Zuraidah and Ismail, Fadillah and Li, Ping Yaw (2017) Factors influencing the effectiveness of inventory management in manufacturing SMEs. In: International Research and Innovation Summit (IRIS2017), 6-7 May 2017, Kings Green Hotel, Melaka.

Che Mohamad Zahid, Nor Hartini and Muhamad Hanafi , Nurfirdawati and Puteh, Saifullizam (2017) Instructional rubrics as an alternative approach for improving practical teaching among teachers candidate. Advanced Science Letters, 23 (2). pp. 1229-1233. ISSN 19366612

Chew, Bee Gek (2017) Pengetahuan dan pengaplikasian kemahiran berfikir aras tinggi dalam kalangan guru teknik dan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chia, Kim Seng and Tan, Yit Peng (2017) Design and development of a shortwave near infrared spectroscopy using NIR LEDs and regression model. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3070-3075. ISSN 20888708

Chin, Min Khee and Kek , Sie Long and Sim, Sy Yi and Ta Wee , Seow (2017) Probabilistic completion time in project scheduling. International Journal of Engineering Research & Science, 3 (4). pp. 44-48. ISSN 23956992

Choong, Pui Ying (2017) An exploratory study on human resource outsourcing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Crocker, Flora (2017) Prediction of photovoltaic (PV) output via artificial neural network (ANN) based on real climate condition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D

D., Norazmi and Dwee, C. Y. and J., Suzilla and A. S., Nurzarina (2017) Exploring student engagement in writing using the flipped classroom approach. Journal of Social Sciences & Humanities, 25 (2). pp. 663-674. ISSN 01287702

Das, Bhagwan (2017) All optical signal regeneration technique design and real time implementation for different modulation schemes using ultrascale FPGA. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Dewan, Raimi and A. Rahim, M. K. and Hamid, M. R. and Jalil, M. E. and A. Majid, H. (2017) Mutual coupling reduction in antenna using EBG on double substrate. Telkomnika, 15 (2). pp. 799-804. ISSN 16936930

Dewan, Raimi and A. Rahim, M. K. and Himdi, Mohamed and Hamid, M. R. and A. Majid, H. and Jalil, M. E. (2017) Multiband frequency-reconfigurable antenna using metamaterial structure of electromagnetic band gap. Applied Physics A, 123 (16). pp. 1-7. ISSN 14320630

Didane, DJamal Hissein and Ab Wahab, Abas and Shamsudin, Syariful Syafiq and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Mohd, Sofian (2017) Assessment of wind energy potential in the capital city of Chad, N’djamena. AIP Conference Proceedings, 1831 (020049). pp. 1-12. ISSN 15517616

Didane, DJamal Hissein and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Shamsudin, Syariful Syafiq (2017) Evaluation of wind energy potential as a power generation source in Chad. International Journal of Rotating Machinery, 2017 . pp. 1-10. ISSN 15423034

Doman, Noriyani (2017) Implikasi Google Apps dalam pengajaran dan pembelajaran pelajar pesisir UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Doraisamy, Sunitha V. (2017) Abandoned project restoration model (APRM) for residential construction projects. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Dwee, Chiew Yen (2017) Teacher beliefs and practices in communicative language competence towards the development of an autonomous learning model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elewe, Adel Muhsin (2017) Hybrid optimization technique for RFID network planning to improve warehouse management efficiency. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Emmanuel, O.S. and Mohd Diah, Mohd Lizam (2017) A review of the impact of neighbourhood crime on residential property values. Journal of Engineering and Applied Sciences, 12 (5). pp. 1205-1211. ISSN 1816-949X

Esa, Ahmad (2017) 20 penuntut UTHM timba pengalaman di Korea Selatan. Berita UTHM .

Esa, Ahmad (2017) Kerjasama guru, polis didik generasi akhlak mulia. Berita Harian .

Esa, Ahmad (2017) TVET perlu pekerja kreatif, inovatif dalam sektor industri. Berita Harian .

Esa, Ahmad (2017) Warden perlu menjiwai sifat pengasih dampingi pelajar. Berita Harian .

Esa, Ahmad and Selamat, Asri and Abd Aziz, Zalina @ Siti Aishah and Padil, Suhaili (2017) Islamic' vocational culinary training at teen rehabilitation centre, Malaysia. Advanced Science Letters, 23 (2). pp. 857-860. ISSN 19366612

F

Fadzilah, Aimi Hafizah (2017) Pelaksanaan pengajaran dan pembelajaran koperatif berasaskan abad ke-21: satu tinjauan di Sekolah Menengah Kebangsaan Pekan Nenas. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Faisal, Muhammad (2017) Penyebaran keilmuan melalui jaringan ulama Tarekat Naqsabandi di Kepulauan Riau. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Fayed Mogalli, Ali Hussein (2017) Integration of building information modelling (BIM) with materials management in construction project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fazli, F. I. M. and Ahmad, M. K. and Soon, C. F. and Nafarizal, N. and A. B., Suriani and Mohamed, A. and Mamat, M. H. and Malek, M. F. and Shimomura, M. and Murakami, K. (2017) Dye-sensitized solar cell using pure anatase TiO2 annealed at different temperatures. Optik, 140 . pp. 1063-1068. ISSN 00304026

Fernando, Harinda and Mahdin, Hairulnizam (2017) A web based peer-to-peer RFID architecture. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 549-559. ISBN 9783319512792

Fouzi, Mohd Anasfarhan (2017) Kajian penilaian tahap kelesuan yang mempengaruhi cara pemanduan bas dalam perbandaran kawasan Lembah Kelang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

G

Gajibo, M. M. and A. Rahim, M. K. and Murad, N. A. and Ayop, O. and Bala, B. D. and A. Majid, H. (2017) X-band operations metamaterial absorber with extended circular ring topology for size reduction. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 180-184. ISSN 25024760

Gambo, Abdu (2017) Implication for office environment ergonomic intervention: a study of local government offices in Katsina state of Nigeria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gamsha, Abdullahi Madaki (2017) A study of flow and heat transfer of nanofluids: between two parallel plates, over a wedge and past a stretching sheet. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Gamsha, Abdullahi Madaki and Abdul Hameed, Mohammed and Roslan, Rozaini (2017) Psolutions of Poiseuille flow using homotopy perturbation method linked with Padé approximation. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2545-2550. ISSN 18196608

Gani, Paran (2017) Phycoremediation using Botryococcus sp. as nutrients removal in organic wastewaters coupled with hydrocarbon production. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Gani, Paran and Mohamed Sunar, Norshuhaila and Matias-Peralta, Hazel and Radin Mohamed, Radin Maya Saphira and Abdul Latiff, Ab Aziz and Parjo, Umi Kalthsom (2017) Extraction of hydrocarbons from freshwater green microalgae (Botryococcus sp.) biomass after phycoremediation of domestic wastewater. International Journal of Phytoremediation, 19 (7). pp. 679-685. ISSN 15497879

Garba, Abdurrahman (2017) Modified rice husk and activated carbon filters for the removal of organics and heavy metals in water. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Garba, Abdurrahman and Nasri, Noor Shawal and Basri, Hatijah and Mohd Zain, Husna and Hayatu, Umar S. and Abdulrasheed, Abdulrahman and Mohsin, Rahmat and Abdul Majid, Zulkifli and Mohamed Rashid, Norhana (2017) Modelling of cadmium (ii) uptake from aqueous solutions using treated rice husk: fixed – bed studies. Chemical Engineering Transactions, 56 . pp. 229-234. ISSN 22839216

Goh, C. L. and A. R., Ruzairi and Abdullah, M. N. and Hafiz, F. R. and Tee, Z. C. (2017) Event-driven applications for hard-field tomography software modelling of forward and inverse solutions. International Journal of Integrated Engineering, 9 (1). pp. 16-23. ISSN 1985854X

Goh, Chiew Loon and Abdul Rahim, Ruzairi and Rahiman, Hafiz Fazalul and Tee, Zhen Cong and Abdul Wahad, Yasmin (2017) Simulation and experimental study of the sensor emitting frequency for ultrasonic tomography system in a conducting pipe. Flow Measurement and Instrumentation, 54 . pp. 158-171. ISSN 09555986

Goh, Kai Chen and Goh , Hui Hwang and Yap, Aaron Boon Kian and Masrom, Md Asrul Nasid and Mohamed, Sulzakimin (2017) Barriers and drivers of Malaysian BIPV application: perspective of developers. Procedia Engineering . ISSN 18777058

Goh , H. H. and Bohari, Azuwien Aida and Lee, S. S. and Sim, S. Y. and Goh, K. C. (2017) Predictive direct power control (PDPC) of grid-connected dual-active bridge multilevel inverter (DABMI). International Journal of Power Electronics and Drive System (IJPEDS), 8 (4). pp. 1524-1533. ISSN 20888694

H

Haikal Ahmad, M. A. and Rahim, M. Zulafif and Mohd Fauzi, M. F. and Azis, N. Hafizah and Ismail, A. E. and Hassan, Mohd Fahrul and Arifin, A. M. T. and Yusof, M. S. and Ibrahim, M. Rasidi (2017) Electrical discharge machining of polycrystalline diamond using copper electrode – finishing condition. IOP Conference Series: Materials Science and Engineering, 203 (012019). pp. 1-6. ISSN 1757899X

Halim, Harliana and Aziz, Hani Suraya and Suhaimy, Khairul Azman and Ani, Fauziah and Jaes, Lutfan and Ahmad, Shakila and Damin, Zahrul Akmal and Syed Abu Bakar, Sharifah Khadijah (2017) The principal thinking of Ibn Khaldun : An analysis on the contribution to the development of contemporary science. In: The 1st International Conference on Social Sciences University of Muhammadiyah Jakarta, Indonesia, 1–2 November 2017 Toward Community, Environmental, and Sustainable Development, 1–2 November 2017, University of Muhammadiyah Jakarta, Indonesia.

Halim, Harliana and Yusoff, Kamaruzaman and Ahmad, Shakila and Abdullah, Abdul Halid (2017) Sumber-sumber kajian terhadap kewujudan negara islam Volga Bulgaria 922 Masehi. In: Prosiding Persidangan Antarabangsa Kelestarian Insan 2017 (INSAN2017) Ayer Keroh, Malacca, Malaysia, 1– 2 November 2017, 1– 2 November 2017, Ayer Keroh, Malacca.

Halim, Harliana and Yusoff, Kamaruzaman and Ahmad, Shakila and Abdullah , Abdul hafiz (2017) Pengislaman masyarakat Bulghar : Sejarah dan kesan. In: The First International Conference on Current Trends in the Middle East (ICCTME 2017), May 2017, Middle East.

Halim, Harliana and Yusoff, Kamaruzaman and Ahmad, Shakila and Ani, Fauziah (2017) Pendigitalan manuskrip risalah Ibn Fadlan 922 m sebagai satu inovasi. In: Prosiding Persidangan Antarabangsa Kelestarian Insan 2017 (INSAN2017) Ayer Keroh, Malacca, Malaysia, 1– 2 November 2017, 1– 2 November 2017, Ayer Keroh, Malacca, Malaysia.

Hamzah, Ahmad Farhan (2017) Durability of self-compacting concrete with coal bottom ash as sand replacement material under aggressive environment. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Mohamad Hazmi (2017) Effectiveness of using empty fruit bunch, coconut fiber and sugarcane baggasse for low thermal conductivity clay bricks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Mohamad Hazmi and Deraman, Rafikullah and Mat Saman, Nor Sarwani (2017) Investigating the effectiveness of using agricultural wastes from Empty Fruit Bunch (EFB), Coconut Fibre (CF) and Sugarcane Baggasse (SB) to produce low thermal conductivity clay bricks. In: AIP Conference Proceedings.

Hamzah, Mohamad Hazmi and Deraman, Rafikullah and Mat Saman, Nor Sarwani (2017) Investigating the effectiveness of using agricultural wastes from empty fruit bunch (EFB), coconut fibre (CF) and sugarcane baggasse (SB) to produce low thermal conductivity clay bricks. In: AIP Conference Proceedings.

Hamzah, Shahidah and Jaes, Lutfan and Abdul Wahab, Muhammad Nubli (2017) Disiplin asas pembinaan mahasiswa berintagriti: Pengukuran melalui kaedah biofeedback. In: Disiplin asas pembinaan mahasiswa berintagriti: Pengukuran melalui kaedah biofeedback.

Hanipah, Mohd Hafizal and Abdullah, Abd Halid and Che Sidek, N. A. and Yunus, Riduan and Nagapan, S. and Yasin, Mohd Norazam and Muhammad Yazid, M. N. A. W. (2017) Wind characteristics and outdoor thermal comfort assessment in East Malaysia. Pertanika journal of science & technology, 25 . pp. 63-72. ISSN 0128-7680

Harimon, Mohd Azhar (2017) High temperature fracture toughness and fatigue behavior of Ti-Zr-Mo and W-Re alloys for X-ray tube application. PhD thesis, Nagaoka University of Technology.

Haron, Siti Haizatul Aishah (2017) Process flow improvement using value stream mapping to reduce waste and lead time in Malaysia healthcare. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Site Hadijah (2017) Keberkesanan peta pemikiran untuk meningkatkan kemahiran berfikir aras tinggi dalam subjek sains. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hasmurni, Hazriyanto (2017) Komitmen organisasi, kepuasan kerja dan prestasi kerja dalam kalangan pensyarah universiti di Kota Batam Indonesia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Haswira (2017) Experimental and simulation study on the effect of geometrical and flow parameters for combined-hole film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Haswira and Abdullah, Mohammad Kamil (2017) Effects of LoD and PoD in combined-hole film cooling. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2509-2514. ISSN 18196608

Hassan, I. A. and Sadikin, A. and Isa, N. M. (2017) Numerical simulation of falling film thickness flowing over horizontal tubes. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3046-3053. ISSN 18196608

Hassan, I. A. and Sadikin, A. and Mat Isa, N. (2017) The numerical modelling of falling film thickness flow on horizontal tubes. In: 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy, 1–3 August 2016, Jogjakarta, Indonesia.

Hassan, Ibnu Anas (2017) The experimental study and numerical simulation of falling liquid film flow on horizontal tubes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Nur Farha and Puteh, Saifullizam (2017) A survey of technology enabled active learning in teaching and learning practices to enhance the quality of engineering students. Advanced Science Letters, 23 (2). pp. 1104-1108. ISSN 19366612

Hassan, S. and Yusof, M. S. and Ding, S. and Maksud, M. I. and Nodin, M. N. and Mamat, K. A. and Sazali, M. S. and Rahim, M. Z. (2017) Investigation of carbon nanotube ink with PDMS printing plate on fine solid lines printed by micro-flexographic printing method. IOP Conference Series: Materials Science and Engineering, 203 (012017). pp. 1-7. ISSN 1757899X

Hauwa, A. and Radin Mohamed, R. M. S. and Algheethi, A. A. and Wurochekke, A. A. and Mohd Kassim, Amir Hashim (2017) Harvesting of Botryococcus sp. biomass from greywater by natural coagulants. Waste Biomass Valor, 5 (1). ISSN 1877265X

Hilyati , S and Nizam , Z M and Zurisman, M A A and Azhar, A T S (2017) Development of an improved crack propagation model for corrosion-induced cover cracking in RC structures. In: 2nd International Conference on Civil Engineering and Materials Science.

Hiromitsu, Takano and Ikuho, Yonezawa and Mitsugu, Todo and Mazlan, Muhammad Hazli and Tatsuya, Sato and Kazuo, Kaneko (2017) Biomechanical study of vertebral compression fracture using finite element analysis. Journal of Applied Mathematics and Physics, 5 . pp. 953-965. ISSN 23274379

Husen, Abdurezak Tahir (2017) Design and implementation of low cost wireless stethoscope. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husin, Muhammad Muslimin and Mustapa, Mohammad Sukri and Wahab, Md Saidin and Hashim, Mohd Yussni and Mohd Jais, Farhana Hazwanee (2017) The morphology and flexural stress of surface treated and untreated kenaf fiber reinforced polypropylene composites. International Journal of Mechanical & Mechatronics Engineering IJMME – IJENS, 16 (04). pp. 1-6. ISSN 2077124X

Hussaini, Iliyasu (2017) The effect of using technology task based approach on English language achievement among primary four school students in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibrahim, Farah Nur Diyana (2017) The efficiency of chitosan-feldspar-zeolite biohybrid adsorbent in treating landfill leachate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Mohamud Ahmed and Ng , Kim Soon and Ahmad, Abd Rahman and Ng, Mei Xin Sirisa (2017) Mediating roles of attitude on intention to use M-learning among students at Malaysian technical universities. Advanced Science Letters, 23 (4). pp. 2795-2798. ISSN 19366612

Ibrahim, Mohamud Ahmed and Ng , Kim Soon and Razzaly, Wahid and Ahmad, Abd Rahman and Ng, Mei Xin Sirisa (2017) Information system key success factors and student behavioral intention to use M-learning. Advanced Science Letters, 23 (4). pp. 2868-2871. ISSN 19366612

Ibrahim, Mohd Rasidi and Rahim, Zulafif and Abd Rahim, Erween and Mohd Tobi, Abd Latif and Cheng, Kai and Ding, Hui (2017) An experimental investigation of cutting temperature and tool wear in 2 dimensional ultrasonic vibrations assisted micro-milling. In: 2016 the 3rd International Conference on Mechatronics and Mechanical Engineering (ICMME 2016), October 21-23, 2016, Shanghai, China.

Ibrahim, N and Esa, Ahmad and Syed Iskandar, S.H.I and Ahmad Jaafar, A.Z (2017) The effects of intelligent development and personality development in communications oral skills. Educational Technology . pp. 47039-47040. ISSN 2229-712X

Ibrahim, Nabilah and Abd Aziz, Nur Shazilah and Abd Manap, Abreeza Noorlina (2017) Vein mechanism simulation study for deep vein thrombosis early diagnosis using CFD. Journal of Physics: Conference Series, 822 (1). pp. 1-6. ISSN 17426596

Ibrahim@Tamrin, Mohd Norihan (2017) Nonlinear Johnson Cook material constitutive model for high speed impact using finite element analysis. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ilias, Mohd Rahimman and Esa, Ahmad (2017) Children's psychology development. Psychology . pp. 6924-46925. ISSN 2229-712X

Irchamni, Siti Marpuah (2017) Penguasaan komunikasi bahasa Arab melalui kaedah aktif komunikatif di sekolah menengah agama. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Irfan, Masooma (2017) Sulfonated polyethersulfone and functionalized MWCNT/PVP nanocomposite membrane for protein separation. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Khairunesa and Isa, Ahmad (2017) Di sini bermulanya kegemilangan. Penerbit UTHM, Universiti Tun Hussein Onn Malaysia. ISBN 9789670764795

Isa, Noor Amira (2017) Bottleneck-based heuristic for permutation flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Abdulnasir (2017) Wavelets operational methods for fractional differential equations and systems of fractional differential equations. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Abdulnasir and Phang, Chang and Phang, Piau (2017) Collocation method based on Genocchi operational matrix for solving generalized fractional pantograph equations. International Journal of Differential Equations, 2017 . pp. 1-10. ISSN 16879651

Iskandar, S.H.I.S and Esa, Ahmad and Ibrahim, N and Idris, M.S (2017) Horseback riding activities helps in co-curricular development. Educational Technology . pp. 47601-47602. ISSN 2229-712X

Ismail, A. E. and Ariffin, A. K. and Abdullah, S. and Ghazali, M. J. (2017) Finite element analysis of J-integral for surface cracks in round bars under combined mode I loading. International Journal of Integrated Engineering, 9 (2). pp. 1-8. ISSN 26007916

Ismail, A. E. and Awang, M. K. and Mohd Tobi, A. L. and Ahmad, M. H. (2017) Mode I stress intensity factors of slanted cracks. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3189-3194. ISSN 18196608

Ismail, Affero and Hassan, Razali and Masek, Alias and Nordin, Abdul Sukor and Jalani, Noor Hisham (2017) The exploratory and confirmatory factor analysis for supervisory input support as the determinant of effective supervision in technology and engineering education. The Social Sciences, 12 (3). pp. 495-501. ISSN 18185800

Ismail, Al Emran and Nezere, N. (2017) Numerical simulation of hybrid composite tubes under oblique compression. World Journal of Engineering, 14 (2). pp. 173-177. ISSN 17085284

Ismail, Isham and Shahidan, Shahiron and Saiful Bahari, Nur Amira Afiza (2017) Potential of utilizing asphalt dust waste as filler material in the production of sustainable Self Compacting Concrete (SCC). In: AIP Conference Proceedings.

Ismail, Isham and Shahidan, Shahiron and Saiful Bahari , Nur Amira Afiza (2017) Potential of utilizing asphalt dust waste as filler material in the production of sustainable self compacting concrete (SCC). In: AIP Conference Proceedings.

Ismail, Izdihar (2017) Ethnobotanical and ethnopharmacological documentation of antimalarial plants used by the Jakun community in Kg Peta, Endau-Rompin, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, M. E. and I., Irwan Mahazir and Othman, H. and Amiruddin, M. H. and Ariffin, A. (2017) The use of animation video in teaching to enhance the imagination and visualization of student in engineering drawing. In: Mechanical Engineering, Science and Technology International Conference 2017, 19–20 April 2017, Johor Bahru, Malaysia.

Ismail, Muammar Mukhsin (2017) Effect of fuel delivery ratio of Diesel-CNG dual fuel engine on performance and emissions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, N. and Abdullah, H. Z. (2017) Influence of extraction process (pre-treatment time) on the characteristic of black tilapia fish skins gelatin. In: International Conference on X-Rays and Related Techniques in Research and Industry, ICXRI 2016, 17-18 August 2016, Putrajaya.

Ismail, Norhasikin and Abdullah, Hasan Zuhudi (2017) Influence of extraction process (pre-treatment time) on the characteristic of black tilapia fish skins gelatin. Materials Science Forum, 888 . pp. 278-283. ISSN 16629752

Ismail, Nur Amalina (2017) Documentation, anti-aging activities and phytochemical profiling of selected medicinal plants used by Jakun women in Kampung Peta, Mersing, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Syamhanim and Mohamad, Mimi Mohaffyza (2017) Kerangka konsep penglibatan politeknik dan industri dalam mengaplikasikan pembelajaran berasaskan kerja (PBK). Sains Humanika, 9 (1-5). pp. 77-86. ISSN 22896996

Ismail , Isham and Shahidan, Shahiron and Saiful Bahari, Nur Amira Afiza (2017) Asphalt dust waste material as a paste volume in developing sustainable self compacting concrete (SCC). In: AIP Conference Proceedings.

J

J. D., Bala and F. A., Kuta and O. P., Abioye and N. U., Adabara and R. , Abdulsalam and I. A., Adelere and Algheethi, Adel A. S. and H., Kaizar and M. M., Ademujimi (2017) Isolation and characterisation of microorganisms contaminating herbal infusion sold in Minna, Nigeria. Journal of Science, Technology, Mathematics and Education (JOSTMED), 13 (2). pp. 10-15. ISSN 07484710

Jaafar, Marliana (2017) High dimensionality carrierless amplitude phase modulation technique for radio over fiber system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jacob, Deden Witarsyah and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2017) A conceptual study on generic end users adoption of e-government services. International Journal on Advanced Science, Engineering and Information Technology, 7 (3). pp. 1000-1006. ISSN 20885334

Jaes, Lutfan and Abdul Latiff, Azmi and Suhaimy, Khairul Azman and Damin, Zahrul Akmal and Ani, Fauziah and Halim, Harliana and Syed Abu Bakar, Sharifah Khadijah and Ahmad, Shakila (2017) The success of Soeharto in managing the development of Indonesia: a Non-Indonesian perspective. In: The 1st International Conference on Social Sciences University of Muhammadiyah Jakarta, Indonesia, 1–2 November 2017, 1–2 November 2017, University of Muhammadiyah Jakarta, Indonesia.

Jaes, Lutfan and Hamzah, Shahidah and Abdul Aziz, Abdul Rahman (2017) Kelangsungan akal budi tempatan menerusi gaya kepimpinan Asia. In: Kelangsungan akal budi tempatan menerusi gaya kepimpinan Asia.

Jaes, Lutfan and Ismail, Fadillah and Damin, Zahrul Akmal and Ani, Fauziah and Suhaimy, Khairul Azman (2017) Nilai “perkauman/kemasyarakatan” sebagai alat pembangunan Soeharto di Indonesia. In: Prosiding Persidangan Antarabangsa Kelestarian Insan 2017 (INSAN2017) The Mudzaffar Hotel, Melaka, 01-02 November 2017, 01-02 November 2017, The Mudzaffar Hotel, Melaka.

Jaes, Lutfan and Suhaimy, Khairul Azman and Damin, Zahrul Akmal and Ani, Fauziah (2017) Pendayaupayaan bahasa Mandarin di Singapura era Lee Kuan Yew - Iktibar untuk bahasa Melayu. In: Pendayaupayaan Bahasa, Agama dan Transformasi Masyarakat. Penerbit UTHM, pp. 19-36. ISBN 978-967-0754-83-2

Jafri, Fatimah (2017) Penggunaan instruksional teknologi maklumat dan komunikasi (TMK) terhadap mata pelajaran teras. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jajuli, Fatin Afiqah (2017) A comparative evaluation on the performance and emission characteristics of an internal combustion engine using ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Junaidi (2017) Nonlinear effects of multi-wavelength fiber laser and four wave mixing signals generation in few mode fiber and highly nonlinear fiber. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ja’apar, Faizah (2017) Bahan bantu mengajar (BBM) dalam pengajaran dan pembelajaran (P&P) di Sekolah Menengah Kebangsaan (SMK) daerah Pontian. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jiuma Mo, Intisar (2017) The impact of capital market development on economic growth among MENA region countries. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Johar, S.H and Suhadi, N and Idris, Mohd Safiee (2017) The important of curriculum in education at secondary school. Educational Technology . pp. 47781-47783. ISSN 2229-712X

Johar, Siti Sarawati (2017) Eksplorasi psikologi dalam organisasi: Sisi positif atau negatif? e-bookstore Universiti Tun Hussein Onn Malaysia. ISBN 978967211026

Johar, Siti Sarawati (2017) Kecerdasan emosi, estim kendiri dan komitmen terhadap organisasi: kesan dan pengaruh di kalangan penjawat awam. Journal of Techno-Social, 9 (1). pp. 1-13. ISSN 1985-9740

Johar, Siti Sarawati (2017) Self-esteem impact on organizational affective and normative commitment among civil servants. In: ASIA International Conference 2017.

Johar, Siti Sarawati and Ani, Fauziah and Halim, Harliana and Hamzah, Shahidah and Zainol, Nur Zainatul Nadra and Saparudin, Intan Farhana and Akiah, Siti Aisyah (2017) Transformation of emotional intelligence: generate the first class human capital among youth. Advanced Science Letters, 4 . pp. 3398-3402. ISSN 1936-6612

Johar, Siti Sarawati and Ani, Fauziah and Zainol, Nur Zainatul Nadra and Saparudin, Intan Farhana (2017) The impact of personality trait on the relationship of emotional intelligence and self-esteem. In: Proceedings of IASTEM International Conference, Stockholm, Sweden, 6th-7th February 2017, 6th-7th February 2017, Sweden.

Johar, Siti Sarawati and Ani, Fauziah and Zainol, Nur Zainatul Nadra and Saparudin, Intan Farhana (2017) The impact of personality trait on the relationship of emotional intelligence and self-esteem. International Journal of Management and Applied Science, 3 . pp. 90-94. ISSN 23947926

Johar, Siti Sarawati and Ismail, Fadillah and Omar, Siti Sarah and Suhaimy, Khairul Azman and Jaes, Lutfan (2017) Leadership in human governance based on a holistic and dynamic spirituality model. In: Leadership in human governance based on a holistic and dynamic spirituality model.

Johar, Siti Sarawati and Md Yusoff, Rosman and Ani, Fauziah and Jaes, Lutfan (2017) Prosiding persidangan pemantapan citra kenegaraan (COSNA 5)2017. In: Di mana bumi dipijak: Seni kecerdasan emosi dalam menjana mahasiswa belia sebagai modal insan bertanggungjawab dan berhemah tinggi, 24-26 Oktober 2017, Universiti Sains Malaysia.

Johar, Siti Sarawati and Md Yusoff, Rosman and Panatik@Abd.Rahman, Siti Aisyah (2017) The influence of personality trait on the relationship of emotional intelligence and self-esteem. International Journal of Management and Applied Science (IJMAS), 4 (4). pp. 1-5. ISSN 2394-7926

Johar, Siti Sarawati and Ani, Fauziah and Hamzah, Shahidah and Halim, Harliana (2017) Tingkah laku devian dan perlakuan jenayah: cabaran kecenderungan negatif di sebalik kehidupan masa lalu dan kini. In: Tingkah laku devian dan perlakuan jenayah: cabaran kecenderungan negatif di sebalik kehidupan masa lalu dan kini.

Joshua, Ruth Yohanna (2017) Tiv – Jukun ethnic conflict in Wukari district of Taraba state northeast Nigeria: horizontal inequalities approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

K

Ka Mei, Wong and Othman, Muhammed Fauzi and Othman, Muhammad Fuad (2017) Gaya kepimpinan pengetua dan pengaruhnya ke atas perkongsian pengetahuan guru. In: Seminar kelestarian perkhidmatan awam bersempena dengan 60 tahun Malaysia merdeka.

Kaamin, Masiri and Idris, Noor Azyyati and Mohd Bukari, Saifullizan and Ali, Zaurin and Samion, Norhafiza and Anjang Ahmad, Mustaffa (2017) Visual inspection of historical buildings using micro UAV. MATEC Web of Conferences, 103 (07003). pp. 1-8. ISSN 2261-236X

Kaamin, Masiri and Ahmad, Nor Farah Atiqah and Mohd Razali, Siti Nooraiin and Mohamad Hilaham, Mashuda and Abdul Rahman, Mohamad and Ngadiman, Norhayati and Sahat, Suhaila (2017) Flood prediction using Geographical Information System (GIS) application at Sungai Sembrong. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-12). pp. 113-117. ISSN 21801843

Kamal Koh, Hasna Heng (2017) Synchronization for different opinions in Malaysia multiracial society: a mathematical exploration study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Nur Hafizah (2017) Processability of waste plastic bag as a novel binder system in metal injection molding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Shahreen and Azahar, Ummi Aznazirah and Samsudin, Noor Azah and Md Fudzee, Mohd Farhan and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Suparjoh, Suriawati (2017) E-Code checker application. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 570-578. ISBN 9783319512792

Kassim, Rahimah and Abdul Hamid, Nor Aziati (2017) The integrated framework of cloud computing implementation in higher education institution: a review of literature. Advanced Science Letters, 23 (2). pp. 1475-1479. ISSN 19367317

Kasvar, K. K. and Nagapan, S. and Abdullah, Abd Halid and Ullah, K. and Deraman, Rafikullah and Yunus, Riduan and Sohu, S. (2017) Cost implication analysis of concrete and masonry waste in construction project. Pertanika journal of science & technology, 25 . pp. 177-184. ISSN 0128-7680

Khalid, Siti Nor Azila (2017) Impact strength of woven kenaf fibre reinforced polyester composite plates. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Faisal (2017) Design and optimisation of three-phase salient rotor wound field flux switching motor. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Khyar, Siti Nur Fahdziha (2017) Kerangka bagi mereka bentuk pakej pembelajaran mobile untuk pembelajaran bahasa Inggeris (kemahiran mendengar dan bertutur). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kumar, Rajesh (2017) Refinement of outer rotor permanent magnet flux switching machine for downhole application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

L

Lagiman, Syahidah (2017) Improvement of relationship between main contractor and subcontractor for successful construction project implementation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Guang Beng (2017) Sustainable product development based on axiomatic design principles. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Lee, M. F. and Lai, C. S. (2017) Exploring learners’ mental health profile: a study in Universiti Tun Hussein Onn Malaysia. In: International Research and Innovation Summit (IRIS2017), 6-7 May 2017, Kings Green Hotel, Melaka.

Lee, M. F. and Lai, C. S. (2017) Mental health profile among the Malaysian technical university students. Research Journal of Applied Sciences (RJAS), 12 (1). ISSN 1815932X

Lee, Woon Kiow (2017) Detection of chipping in ceramic cutting inserts from workplace profile signature during turning process using machine vision. PhD thesis, Universiti Sains Malaysia.

Lee, Y Y and Halim, M S and Aminudin, E and Guntor, N A (2017) Thermal repellent properties of surface coating using silica. In: IOP Conf. Series: Materials Science and Engineering.

Lee, Y Y and Lee , Y H and Mohammad , S and Shek , Poi Ngian and Ma, C K (2017) Thermal characteristics of a residential house in a new township in Johor Bahru. In: IOP Conf. Series: Materials Science and Engineering.

Lee, Yong Siang and Mohamed Ghazali, Farid Ezanee and Zainun, Noor Yasmin and Ali, Roslinda (2017) General risks for tunnelling projects: an overview. In: Proceedings of the International Conference of Global Network for Innovative Technology and AWAM International Conference in Civil Engineering.

Leman, A S and Shahidan, Shahiron and Nasir, A J and Senin, M S and Mohd Zuki, Sharifah Salwa and Wan Ibrahim, Mohd Haziman and Deraman@Muhammad, Ruzilawati and Khalid, Faisal Sheikh and Azhar, A T S (2017) Properties of concrete containing coconut shell powder (CSP) as a filler. In: IOP Conf. Series: Materials Science and Engineering.

Leman, A S and Shahidan, Shahiron and Senin, M S and Shamsuddin, S M and Anak Guntor, N A and Mohd Zuki, Sharifah Salwa and Khalid, Faisal Sheikh and Azhar, A T S and Razak, N H S (2017) Durability of coconut shell powder (CSP) concrete. In: IOP Conf. Series: Materials Science and Engineering.

Leong, Wai Yean (2017) Development of an electronic aerosol atomisation system for generating three-dimensional (3D) cells in microencapsulations and microtissues characterisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Leong, Wai Yean and Soon , Chin Fhong and Wong, Soon Chuan and Tee , Kian Sek and Cheong, Sok Ching and Gan, Siew Hua and Youseffi, Mansour (2017) In vitro growth of human keratinocytes and oral cancer cells into microtissues: an aerosol-based microencapsulation technique. Bioengineering, 4 (2). pp. 1-14. ISSN 23065354

Lim, Alvin John Meng Siang and Izzudini, Muhammad Arif Azraei (2017) The behaviour of remolded Batu Pahat soft clay with different OCR values under cyclic loading. MATEC Web of Conferences, 103 (07004). pp. 1-9. ISSN 2261236X

Lim, Hui Teng (2017) Fabrication and characterization of copper oxide thin film by thermal CVD for ethanol sensor application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ling, Chin Wan (2017) Harmonic reduction of a single-phase multilevel inverter using genetic algorithm and particle swarm optimization. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Low, Zhen Sheng and Sufahani, Suliadi and Ismail, Zuhaimy (2017) Mathematical reviews on optimization techinique for dietplanning problem: case study eczema patient. International Journal of Information Research and Review, 4 (4). pp. 4027-4030. ISSN 23499141

Low, Zhen Sheng and Sufahani, Suliadi Firdaus and Ismail, Zuhaimy (2017) Mathematical modeling technique for diet planning problem: eczema patient. International Journal of Multidisciplinary Research and Development, 4 (5). pp. 36-39. ISSN 23494182

Luis Hii, Anneza (2017) Influence of Enterococcus faecalis and Bacillus sp with added calcium lactate on engineering concrete properties and enhancement of self healing in concrete under unsterillized condition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M. Idris, A. A. and Arsat, R. and Ahmad, M. K. and Sidek, F. (2017) Comparison of deposition methods of ZnO thin film on flexible substrate. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 536-541. ISSN 25024760

M.L.A.H, Abu Bakar and Esa, Ahmad (2017) Benefit of co-curricular. Social Science . pp. 45592-45595. ISSN 2229-712X

Ma'at, Norzarina (2017) Modeling dynamic behaviour including shockwave propagation and spall failure in orthotropic materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Madaki, A. G. and Roslan, R. and Rusiman, M. S. and Raju, C. S. K. (2017) Analytical and numerical solutions of squeezing unsteady Cu and TiO2-nanofluid flow in the presence of thermal radiation and heat generation/absorption. Alexandria Engineering Journal . ISSN 11100168

Madlan, M. A. and Ghazali, M. I. and Zaman, I. and Kasron, M. Z. and Ying, T. C. (2017) The application of coconut fiber as dissipative silencer. IOP Conference Series: Materials Science and Engineering, 165 (012025). ISSN 1757899X

Madun, Aziman and Wijeyesekera, Devapriya Chitral and Ahmad Tajuddin, Saiful Azhar and Zainalabidin, Mohd Hazreek and Yunus, Riduan and Tajul Baharudin , M. F. (2017) Characterisation of lateral and vertical subsurface heterogeneity in the ground using sustainable seismic surface wave methodology. Pertanika journal of science & technology, 25 . pp. 169-176. ISSN 0128-7680

Mahadi, Lina Farhana (2017) Fuzzy expert system on diagnosis atherosclerosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahammed Rafter, Murni Faridah (2017) Processing of porous 316L stainless steel (SS316L) foams using compaction method for different space holders and different sintering environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahdi, Ahmed Sahib and Mustapa, Mohammad Sukri and Abdul Latif, Noradila and Ab Kadir, Muhammad Irfan and Samsi, Mohd Arif (2017) Heat treatment for an recycling aluminum AA6061 using milling process at various holding aging time. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2582-2587. ISSN 09754024

Mahdi, Ahmed Sahib and Mustapa, Mohammad Sukri and Mohamad, Mahmod Abd Hakim and Mohd Tobi, Abdul Latif and Ab Kadir , Muhammad Irfan and Samsi, Mohd Arif (2017) Dry sliding wear behavior of the reinforced by graphite particle and heat treated of recycled aluminum aa6061 based. ResearchGate, 740 . pp. 9-16. ISSN 16629795

Mahgoub Elsayed, Mazen Hashim (2017) A computational tool for microstrip planar filter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Maizatul, A. Y. and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel A. and Amir Hashim, M. K. (2017) An overview of the utilisation of microalgae biomass derived from nutrient recycling of wet market wastewater and slaughterhouse wastewater. International Aquatic Research, 9 (3). pp. 177-193. ISSN 20084935

Mamat, K. A. and Yusof, M. S. and Wan Yusoff, Wan Fauziah and Rahim, M. Zulafif and Hassan, S. and A. Rahman, M Qusyairi and Abd Karim, M. A. (2017) Dehydration of traditional dried instant noodle (Mee Siput) using controlled temperature & humidity dryer. IOP Conference Series: Materials Science and Engineering, 203 (012009). pp. 1-7. ISSN 1757899X

Mamat, Rabiei and Mohd Noor, Ahmad Shukri and Herawan, Tutut and Mat Deris, Mustafa (2017) Cluster validation analysis on attribute relative of soft-set theory. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 3-10. ISBN 9783319512792

Manap, Norpadzlihatun and Muhamad, Nor Izzah and Sandirasegaran, Kavitha (2017) Strength and water absorption rate of concrete made from palm oil fuel ash. Materials Science Forum, 889 . pp. 261-264. ISSN 16629752

Mangi, Sajjad Ali and Sohu, Samiullah and Soomro, Faheem Ahmed and Abdullah, Abd Halid and Nagapan, Sasitharan (2017) Assessment of physicochemical parameters for the drinking water quality in the vicinity of Nawabshah City, Sindh, Pakistan. Engineering Science and Technology International Research Journal, 1 (1). pp. 10-14. ISSN 25207393

Mansor, Marlini (2017) Keberkesanan penggunaan EDUBASE dalam kalangan pelajar teknikal yang berbeza gaya kognitif, afektif dan psikomotor di politeknik Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mantari, Muhammad Hanafi Asril Rajo (2017) Physical characterization of Palm Fatty Acid Distillate (PFAD) blends as biofuel. MATEC Web of Conferences, 13 . pp. 1-7.

Maskur, Said (2017) Kerangka pentaksiran pendidikan karakter untuk mata pelajaran sains sekolah menengah di Kota Batam. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Masri, Muhammad Zakhwan (2017) Investigation on air + CO2 gas mixtures under lightning impulse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Abdul Raub, Radhi and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of total chlorine free (TCF) bleaching on the characteristics of chemi mechanical (CMP) pulp and paper from Malaysian durian (DURIO ZIBETHINUS MURR.) rind. Jurnal Teknologi, 79 (4). pp. 55-64. ISSN 2180–3722

Masrol, Shaiful Rizal and Ibrahim , Mohd Halim Irwan and Adnan, Sharmiza and Sa’adon, Amir Mubarak and Sukarno, Khairil Ika and Yusoff, Mohd Fadrol Hisham (2017) Soda-anthraquinone durian (durio zibethinus murr.) rind linerboard and corrugated medium paper: a preliminary test. IOP Conference Series: Materials Science and Engineering, 226 (012174). pp. 1-10. ISSN 1757-899X

Masrol, Shaiful Rizal and Ibrahim , Mohd Halim Irwan and Adnan, Sharmiza and Talib, Mohd Rahmad and Lau , Lee Sian (2017) Effects of soda-anthraquinone pulping variables on the durian rind pulp and paper characteristics: a preliminary test. IOP Conference Series: Materials Science and Engineering, 226 (012175). pp. 1-10. ISSN 1757-899X

Masrom, Md Asrul Nasid and Abd Rahim, Mohd Hilmi Izwan and Siow, Chan Ann and Mohamed, Sulzakimin and Goh, Kai Chen (2017) A preliminary exploration of the barriers of sustainable refurbishment for commercial building projects in Malaysia. Procedia Engineering . pp. 1-10. ISSN 18777058

Mat Ali @ Yunus, Zalilah Murni (2017) Acid impregnated honeydew rind activated carbon for chromium and zinc removal. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mat Harun, Noor Hafizzatul 'Izzah (2017) Vein mechanism assessment in underweight, normal weight, overweight and pregnant subjects for risk factor of deep vein thrombosis (DVT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Radzuan, Indera Syahrul and Mohammed Ishaq, Mohammed and Sulaiman, Noralfishah and Ahmad, Yahaya (2017) Conserving the heritage village in Malaysia: perspective and challenges. In: E-Proceeding of the 2nd International Nusantara Cultural Heritage Symposium 2017, 15-17 November 2017, Padang, Indonesia.

Mat Saman, Nor Sarwani and Deraman, Rafikullah and Hamzah, Mohamad Hazmi (2017) Development of low thermal conductivity brick using rice husk, corn cob and waste tea in clay brick manufacturing. In: AIP Conference Proceedings.

Mat Saman, Nor Sarwani and Deraman, Rafikullah and Hamzah, Mohamad Hazmi (2017) Development of low thermal conductivity brick using rice husk, corn cob and waste tea in clay brick manufacturing. In: AIP Conference Proceedings.

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Designation of soap molder machine and procedure for transparent soap. IOP Conference Series: Materials Science and Engineering, 203 (012001). pp. 1-7. ISSN 1757899X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Solving cracking phenomenon in premium transparent toilet soap production using stretched LLDPE film wrap. IOP Conference Series: Materials Science and Engineering, 203 (012015). pp. 1-7. ISSN 1757899X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Study on handing process and quality degradation of oil palm fresh fruit bunches (FFB). IOP Conference Series: Materials Science and Engineering, 203 (012027). pp. 1-9. ISSN 1757899X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) A study on shelf life prolonging process of chili soy sauce in Malaysian SMEs’ (small medium enterprise). IOP Conference Series: Materials Science and Engineering, 203 (012026). pp. 1-6. ISSN 1757899X

Mazenan, Puteri Natasya and Khalid, Faisal Sheikh and Shahidan, Shahiron and Shamsuddin, Shamrul-mar (2017) Review of palm oil fuel ash and ceramic waste in the production of concrete. In: IOP Conf. Series: Materials Science and Engineering.

Mazlan, Muhammad Hazli and Mitsugu, Todo and Ikuho, Yonezawa and Hiromitsu, Takano (2017) Biomechanical alteration of stress and strain distribution associated with vertebral fracture. Journal Of Mechanical Engineering, 2 (2). pp. 123-133. ISSN 2550164X

Md Derus, Khamirrudin and J., Kavikumar and Amir Hamzah, Nor Shamsidah (2017) Decomposition of bipolar fuzzy finite state machines and transformation semigroups. Journal of Engineering and Applied Sciences, 12 (3). pp. 679-683. ISSN 1816949X

Md Fudzee, Mohd Farhan and Mohamed, Juliana and Ramli, Azizul Azhar and Kasim, Shahreen and Mahdin, Hairulnizam and Ismail, Mohd Norasri and Ismail, Azizan and Jofri, Mohd Hanif (2017) Associating user’s psychology into quality of service: an example of web adaptation services. Acta Informatica Malaysia, 1 (1). pp. 29-31. ISSN 25210505

Md Sai‘aan, Nurul Hamizah (2017) Development of a micro-extruder with vibration mode for microencapsulation of human keratinocytes in calcium alginate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Salleh, Md Zakir (2017) Potensi penggunaan baja Organoseep terhadap prestasi pertumbuhan, produktiviti dan pengurusan penanaman pokok tomato (Solanum lycopersicum). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Md Taujuddin, Nik Shahidah Afifi (2017) Improved thresholding and quantization techniques for image compression. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Md Yusoff, Hannaffie (2017) The effect of liquidity and solvency on profitability: the case of public-listed consumer product companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Megat Salleh, Nan Nurul Hidayah and Puteh, Saifullizam (2017) A review of the 21st century skills in technical vocational education and training (TVET). Advanced Science Letters, 23 (2). pp. 1225-1228. ISSN 19366612

Mering, M M and Aminudin, E and Chai, C S and Zakaria, R and Tan, C. S. and Lee, Y Y and Redzuan, A A (2017) Adoption of Building Information Modelling in project planning risk management. In: IOP Conf. Series: Materials Science and Engineering.

Mildad Zaltum, Mohamed Ahmed (2017) Investigation on HeLa cells behaviour induced with pulse electric field for wound healing application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Fadzilah (2017) Developing a guideline for an integrated quality, environmental, occupational health and safety, and energy management system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, M. A. H. and Kaamin, M. and M. Nor, M. H. and Janon, M. N. and M. Soid, M. H. and Jamil, M. F. and Othman, K. (2017) Mesin penghiris bawang: rekabentuk mesin. In: International Conference on Engineering Technology, Vocational Education and Social Science 2017 (ICETVESS 2017), 29th -30th August 2017, E-Learning Building, Sultan Idris Education University, Perak.

Mohamad, M. A. H. and Kaamin, M. and M. Nor, M. H. and Janon, M. N. and Jamil, M. F. and Othman, K. (2017) Teknik penghirisan bawang: cabaran dan pendekatan baru. In: International Conference on Engineering Technology, Vocational Education and Social Science 2017 (ICETVESS 2017), 29th - 30th August 2017, E-Learning Building, Sultan Idris Education University, Perak.

Mohamad, Mahmod Abd Hakim and Wan Mat, Wan Ali and Ahmad Zaidi, Ahmad Mujahid and Tuan Ibrahim, Tuan Mohd Hafeez and Hassim, Hairul Mubarak and Mustapa, Mohammad Sukri and Abdullah, Shohaimi (2017) Penetration resistance force of sandwich panels composite with kenaf foam as a core material against deformable projectiles. Defence S&T Technical Bulletin, 10 (2). pp. 101-168. ISSN 19856571

Mohamad, Mimi Mohaffyza and Sulaiman , Nor Lisa and Mohd Salleh, Kahirol and Lai, Chee Sern (2017) Innovative invention skills and individual competency model for vocational education. International Journal of Information and Education Technology, 7 (7). pp. 514-517. ISSN 20103689

Mohamad, Mimi Mohaffyza and Yee , Mei Heong and Tee , Tze Kiong (2017) Cognitive-learning styles conceptual framework in vocational education. The Social Sciences, 12 (5). pp. 855-861. ISSN 18185800

Mohamad, N. and Goh, W. I. and Faiz, Amirul and A. Samad, A. A. (2017) RAC with recycle aggregate from various concrete waste. In: Advanced Concrete Technology And Green Materials. Penerbit UTHM. ISBN 9789670764979

Mohamad, Noridah and Wan , Goh Inn and Abdullah, Redzuan and Abdul Samad, Abdul Aziz and Mendis, Priyan and Sofi, Massoud (2017) Structural performance of FCS wall subjected to axial load. Construction and Building Material, 134 . pp. 185-198. ISSN 0950-0618

Mohamad, Radiah (2017) Magnetohydrodynamic boundary layer flow in a nanofluid with various stream conditions. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Fazli, Fatin Izyani (2017) Fabrication of titanium dioxide thin film prepared by spray pyrolysis deposition method for dye-sensitized solar cell. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Hamim, Mohd Akmal Firdaus (2017) Kompetensi guru reka cipta dalam bidang elektrik di sekolah menengah harian di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Jamil, Ahmad Syakir (2017) Study of kitchen hood water mist system for cooking emission (UL1046) filtration with low pressure deflected nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Mohsin, Mohamad Farhan and Hamdan, Abdul Razak and Abu Bakar, Azuraliza and Abd Wahab, Mohd Helmy (2017) Validation on an enhanced dendrite cell algorithm using statistical analysis. International Journal on Advanced Science, Engineering and Information Technology, 7 (2). pp. 482-488. ISSN 20885334

Mohamad Salleh, Fatin Nabilah (2017) Performance of four-stage cascaded fiber optical parametric amplifier (FOPA) using Optisystem. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Sari, N and Esa, Ahmad (2017) Factors affecting students participation in extra-curricular. Psychology . pp. 6960-46962. ISSN 2229-712X

Mohamad Taher, Mohammad Nasir and Aman, Mohamad Yusri (2017) Effects of advera® warm mix additive on the rheological properties of unaged and short term aged asphalt binders. Journal of Fundamental and Applied Sciences, 9 . pp. 650-666. ISSN 1112-9867

Mohamed, Norirda and Mat Saman, Muhamad Zameri and Sharif, Safian (2017) Quality assurance of remanufactured components of end-of-life vehicle: a literature review. Advanced Science Letters, 23 (5). pp. 4644-4648. ISSN 19366612

Mohamed, Othman and Yahya, Imran Ariff and Hanid, Mahanim and Mohd Danuri, Mohd Suhaimi and Mohd Nor, Fadhilah and Abd Karim, Saipol Bari (2017) Pengurusan prapembinaan ukur bahan. Penerbit UTHM, Universiti Tun Hussein Onn Malaysia. ISBN 9789670764788

Mohamed, R. M. and Al-Gheethi, A. A. and Aznin, S. S. and Hasila, A. H. and Wurochekke, A. A. and Kassim, A. H. (2017) Removal of nutrients and organic pollutants from household greywater by phycoremediation for safe disposal. International Journal of Energy and Environmental Engineering, 8 (3). pp. 259-272. ISSN 22516832

Mohamed, Sulzakimin and Seow , Ta Wee and Chan, Ngai Weng (2017) The awareness towards sustainable development of construction industry in Kuala Lumpur, Malaysia. In: Dignified Researchers in Civil, Architectural & Environmental Engineering (DRCAEE) 2017, 18/04/2017 to 19/04/2017, Kyoto, Japan.

Mohamed Anuar, Rabiatul Adawiyah (2017) Interfacial reaction between SAC305 and SAC405 lead-free solders and electroless nickel/immersion silver (ENImAg) surface finish. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Jamal, U.N and Esa, Ahmad (2017) Quiet abuse affects the development of children’s emotions. Educational Technology . pp. 47793-47794. ISSN 2229-712X

Mohamed Nazri, Fadzli and Shahidan, Shahiron and Baharuddin, Nur Khaida and Beddu, Salmia and Abu Bakar, Badorul Hisyam (2017) Effects of heating durations on normal concrete residual properties: compressive strength and mass loss. In: IOP Conf. Series: Materials Science and Engineering.

Mohammad Mokhtar, Salina (2017) Fabrication of titanium dioxide nanorods array for ultraviolet sensor application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammadhosseini, Hossein and Abdul Awal, A. S. M. and Mohd Yatim, Jamaludin (2017) The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres. Construction and Building Materials, 143 . pp. 147-157. ISSN 09500618

Mohammadhosseini, Hossein and Mohamad Yatim, Jamaludin and Mohd Sam, Abdul Rahman and Abdul Awal, A. S. M. (2017) Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash. Journal of Cleaner Production, 144 . pp. 448-458. ISSN 09596526

Mohammed, Abdulhakim Abdullah Al-Ezzi (2017) Development of telemedicine system for remote biomedical operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Akmal Nizam and Razali, Mohd Azahari and Sapit, Azwan and Hushim, Mohd Faisal and Osman, Shahrul Azmir and A. Rahman, Mohamad Farid (2017) Numerical study of variable length exhaust pipe in small engine. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2374-2379. ISSN 18196608

Mohammed, Hadi (2017) The effects of vocational training and other correctional programmes on the reformation, rehabilitation and reintegration of offenders in Nigerian Correctional Institutions. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed El Bireki , Majdi Farag (2017) Enhanced image watermarking techniques with contour compression methods. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd @ Mohd Nor, Syarul Hakimi (2017) Optimizations and recycling industrial waste (palm oil fly ash) as a pigment in coating technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ali, A. Z. and Sanjayan, Jay and Guerrieri, Maurice (2017) Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Construction and Building Materials, 137 . pp. 195-207. ISSN 09500618

Mohd Amin, Azriszul (2017) Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, M A and Abas, N H and Shahidan, Shahiron and Rahmat, M H and Suhaini, N A and Nagapan, Sasitharan and Abdul Rahim, Ruzairi (2017) A review on the current issues and barriers of Industrialised Building System (IBS) adoption in Malaysia’s construction industry. In: IOP Conf. Series: Materials Science and Engineering.

Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Ahmad Latiffi, Nur Atikah and Mohd Rozlan, Nur Farahanim and Al-Gheethi, A. A. S. (2017) Protein and lipid content of microalgae Scenedesmus sp. biomass grown in wet market wastewater. MATEC Web of Conferences, 103 (06011). pp. 1-6. ISSN 2261236X

Mohd Arif, Muhammad Farhan (2017) A study on ridership capacity analysis at Rapid Kelana Jaya Line Station. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Jais, Farhana Hazwanee (2017) Determination of processing parameters of photostability for polyvinyl chloride rice husk composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Kassim, Amir Hashim and Sulaiman , Siti Mariam and Radin Mohamed, Radin Maya Saphira and Al Gheethi , Adel Ali Saeed (2017) Rainwater harvesting study at Masjid Jamek Riyahdus Solihin, Pintas Puding, Batu Pahat Johor Malaysia. In: Third International Conference on Science, Engineering & Environment (SEE).

Mohd Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Chua , King Lee and Amirulah, Rahman and Ambar, Radzi (2017) Optical tomography verification for single and mixed modalities. Sensors and Actuators A, 253 . pp. 10-26. ISSN 09244247

Mohd Napi, Muhammad Luqman (2017) Fabrication and characterization of nanostructured fluorine doped tin oxide thin film for DSSC by hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nawi, Mohd Nasrun and Deraman, Rafikullah and Bamgbade, Jibril Adewale and Zulhumadi, Faisal and Mehdi Riazi, Salman Riazi (2017) E-procurement in Malaysian construction industry: benefits and challenges in implementation. International Journal of Supply Chain Management, 6 (1). pp. 209-213. ISSN 20507399

Mohd Noh, Hamidun (2017) An analytical study on the residual strength of RC structures with degradation damage. PhD thesis, Kyushu University.

Mohd Noh, Nur Hanifah (2017) Employability of local trained skill labour in construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Ahmad Fuad (2017) A correlation between whole body vibration and low back pain on lorry drivers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, M.H and Suhadi, N and Tee , Tze Kiong (2017) Self awareness curiculum activities and effectiveness to youth. Social Science . pp. 47228-47231. ISSN 2229-712X

Mohd Noor, S. N. F. and Md Tab, F. and Kamarulzaman, R. (2017) Exploring job interview skills of future engineers: application of appraisal analysis assessment and verbal impression management. Journal of Technical Education and Training (JTET), 9 (1). pp. 87-99. ISSN 22298932

Mohd Rabani, Nur Amira (2017) Effects of corrosion and wear on cermet based coatings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rabani, Nur Amira and Kamdi, Zakiah (2017) Two-body dry abrasive wear performance of high velocity oxygen fuel spray process and electrodeposited cermet coatings. Materials Science Forum, 888 . pp. 131-135. ISSN 16629752

Mohd Sah, Najwaa and Esa, Ahmad (2017) Vocational college students career in furniture operation and manufacturing course. Educational Technology . pp. 47790-47792. ISSN 2229-712X

Mohd Saleh, Siti Juita Mastura (2017) Modelling and analysis of thin-walled structures for optimal design of composite wing. PhD thesis, Cranfield University.

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon UV irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Anuar (2017) Design and development of ocean monitoring system based on GPS. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Zuliazura and Osman, Kahar and Abdul Kadir, Mohammed Rafiq (2017) Comparative study of the computational fluid dynamics and fluid structure interaction analysis in human airways flow. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3151-3155. ISSN 18196608

Mohd Salleh, Zuliazura and Osman, Kahar and Takahisa, Yamamoto (2017) Investigation on the effect of stenosis in respiratory airflow in human airway by particle image velocimetry. Advanced Science Letters, 23 (5). pp. 4467-4471. ISSN 19366612

Mohd Shaufi, Mohamad Aasyraaf and A. Majid, Huda and Zainal Abidin, Zuhairiah and Dahlan, Samsul Haimi and A. Rahim, Mohamad Kamal and Ayop, Osman (2017) Compact digital television (DTV) antenna for indoor usage. International Journal of Electrical and Computer Engineering (IJECE), 7 (2). pp. 784-790. ISSN 20888708

Mohd Suhaimi, Nurul Syahada (2017) Standard guru Malaysia dalam program persediaan guru reka bentuk dan teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Tobi, A. L. and Kamdi, Z. and Ismail, M. I. and Nagentrau, M. and Roslan, L. N. H. and Mohamad, Z. and Omar, A. S. and Abdul Latif, N. (2017) Abrasive wear failure analysis of tungsten carbide hard facing on carbon steel blade. IOP Conf. Series: Materials Science and Engineering, 165 (012020). pp. 1-9. ISSN 17578981

Mohd Tobi, A. L. and Sun, W. and Shipway, P. H. (2017) Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact. Tribology International, 113 . pp. 474-486. ISSN 0301679X

Mohd Tobi, A. L. and Sun, W. and Shipway, P. H. (2017) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling. Tribology International, 113 . pp. 448-459. ISSN 0301679X

Mohd Yusoff, Nurrul Rahmah (2017) Continuous biodiesel process using ultrasonic in-line reactor for jatropha curcas oil (JCO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohsen Ali, Bassam Hasan (2017) Design and development of portable home based rehabilitation device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Mardiha and Kolop, Roslan and Hamid, Nor Baizura and Kaamin, Masiri and Rosdi, Mohd Farhan and Ngadiman, Norhayati and Sahat, Suhaila (2017) The behaviour of palm oil fibre block masonry prism under eccentric compressive loading. In: International Research and Innovation Summit (IRIS2017), 6–7 May 2017, Melaka.

Morsin, Marlia and Mat Salleh, Muhamad and Sahdan, Mohd Zainizan and Mahmud , Farhanahani (2017) Effect of seeding time on the formation of gold nanoplates. International Journal of Integrated Engineering, 9 (2). pp. 27-30. ISSN 26007916

Morsin, Marlia and Mat Salleh, Muhamad and Umar, Akrajas Ali and Sahdan, Mohd Zainizan (2017) Gold nanoplates for a localized surface plasmon resonance-based boric acid sensor. Sensors, 17 (5). pp. 1-9. ISSN 14248220

Muhamad Sanusi, Amanina and Puteh, Saifullizam (2017) An approach of excellence talent in engineering education programme of enhancing the quality of students. Advanced Science Letters, 23 (2). pp. 1109-1112. ISSN 19366612

Muhammad Said, Khaeruddin (2017) Pembangunan guru melalui latihan kurikulum 2013 di Kementerian Agama Provinsi Kepulauan Riau. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Muhammad Zain, Ruminah (2017) The development of an assessment framework for vocational education training programmes in the NOSS Based Training System (NBTS) and the National Dual Training System (NDTS). PhD thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Suberi, Anis Azwani (2017) Computer aided system for dendritic cells detection and counting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mumin, Abdulrashid O. and Abdulhasan, Raed Abdulkareem and Alias, Rozlan and Awaleh, Abdisamad A. and Abdullah, Jiwa and Dahlan, Samsul Haimi (2017) A survey on recent approaches of electromagnetic absorption reduction with respect to human head exposure to GSM frequency bands. Science International (Lahore), 29 (1). pp. 13-17. ISSN 10135316

Muniandy, Nagentrau (2017) Formulating the plastic deformation expression on coated substrate as a coating selection tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Sabariah and Ibrahim , I and Mohd, A S and Shahabuddin, M M and Sulaiman, S (2017) Solar trap for banana drying method. In: MATEC Web of Conferences.

Mustafa, Mohd Syafiq Syazwan (2017) Humidity control in different building applications; restaurant and operation theatre. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafha, Anuar (2017) Penerimaan warga emas terhadap aplikasi teknologi dalam penyampaian dakwah bertalaqi di daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mutalib, Wan Fatin Liyana (2017) Assessment of carotid arterial wall movement from offline B-mode ultrasound image for early detection of atherosclerosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

Nagentrau, M. and Mohd Tobi, A. L. and Kamdi, Z. and Ismail, M. I. and Sambu, M. (2017) Microstructure analysis of tungsten carbide hardfacing on carbon steel blade. IOP Conf. Series: Materials Science and Engineering, 203 (012014). pp. 1-8. ISSN 17578981

Naseem, Rashid (2017) An improved hierarchical clustering combination approach for software modularization. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Naser, Mohamed M. and Zulkiple, Adnan and Al bargi, Walid A. and Khalifa, Nasradeen A. and Daniel , Basil David (2017) Modeling pedestrian gap crossing index under mixed traffic condition. Journal of Safety Research , 63 . pp. 91-98. ISSN 0022-4375

Nazari, Ain (2017) Kaedah pengesanan automatik salur darah retina untuk imej digital fundus. PhD thesis, Universiti Kebangsaan Malaysia.

Nemmang, Mohd Shafie (2017) Development of vehicle lane changing model within U-turn facilities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng , Kim Soon and Ahmad, Abd Rahman and Chan, Wei Kiat and Md Sapry, Hairul Rizad (2017) SMES are embracing innovation for business performance. Journal of Innovation Management in Small & Medium Enterprises, 2017 . pp. 1-17. ISSN 2166076X

Ng , Kim Soon and Ahmad, Abd Rahman and Samhana, Nur (2017) An integrated technical and marketing approach to e- banking customer satisfaction. Advanced Science Letters, 23 (4). pp. 3071-3074. ISSN 19366612

Ng , Kim Soon and Ahmad, Abd Rahman and Yau, Chau Poh (2017) Improving SMEs financing for stronger financial and non-financial performance. Advanced Science Letters, 23 (4). pp. 3025-3028. ISSN 19366612

Ng , Kim Soon and Ibrahim, Mohamud Ahmed and Razzaly, Wahid and Ahmad, Abd Rahman and Ng, Mei Xin Sirisa (2017) Mobile technology for learning satisfaction among students at Malaysian technical universities (MTUN). Advanced Science Letters, 23 (1). pp. 223-226. ISSN 19366612

Ng , Kim Soon and Isah, Nuhu and Ali, Maimunah and Ahmad, Abd Rahman (2017) Effects of SMART tunnel maintenance works on flood control and traffic flow. Advanced Science Letters, 23 (1). pp. 322-325. ISSN 1936-6612

Ng , Kim Soon and Lim, Hui Chin and Ahmad, Abd Rahman (2017) Quality assurance practices of small size food manufacturing companies in Malaysia. Advanced Science Letters, 23 (1). pp. 382-385. ISSN 19366612

Ng , Kim Soon and Lim, Hui Chin and Ahmad, Abd Rahman (2017) Quality assurance practices of the food manufacturers in Malaysia. Advanced Science Letters, 23 (1). pp. 317-321. ISSN 19366612

Ng , Kim Soon and Musbah, Fadia Abdalla and Ahmad, Abd Rahman (2017) Enhancing of nurse interpersonal skill boosts cancer patient satisfaction. Advanced Science Letters, 23 (1). pp. 326-329. ISSN 19366612

Ng , Kim Soon and Razzaly, Wahid and Ahmad, Abd Rahman and Lau, Vincent Kum Shen (2017) Turning industrial visit into rich learning experiences. Advanced Science Letters, 23 (4). pp. 2966-2969. ISSN 19366612

Ngadengon, Rafidah and Md. Sam, Yahaya and Hamdan, Rohaiza and A. Jalil, Mohd Hafiz and Abdul Kadir, Herdawatie (2017) Multirate output feedback based discrete integral sliding mode control for system with uncertainties. In: Communications in Computer and Information Science. Modeling, Design and Simulation of Systems, 751 . Springer Nature Singapore Pte Ltd., pp. 712-722. ISBN 9789811064630

Ngadengon@Ngadungon , Rafidah (2017) Modified multirate output feedback based discrete sliding mode control for input chattering reduction. PhD thesis, Universiti Teknologi Malaysia.

Ngadiman, Norhayati and Ahmad, Nor Amalina and Amiruddin, Mohd Hasril and Kaamin, Masiri (2017) Study on sustainable behaviour of engineering students in technical university. Journal of Social Sciences & Humanities, 25 . pp. 67-72. ISSN 01287702

Ngadiman, Norhayati and Rahman, Ismail Abdul and Kaamin, Masiri and Amiruddin, Mohd Hasril and Leman, Abdul Mutalib and Mokhtar, Mazlin (2017) Governance strategies in sustainable campus using Rasch model. Advanced Science Letters, 23 (4). pp. 3233-3236. ISSN 19366612

Nizam, Yoosuf and Mohd, Mohd Norzali and Abdul Jamil, M. Mahadi (2017) Human fall detection from depth images using position and velocity of subject. Procedia Computer Science, 105 . pp. 131-137. ISSN 18770509

Nizar Shamsuddin, Mohd Khairul and Mohd Kusin, Faradiella and Sulaiman, Wan Nor Azmin and Ramli, Mohammad Firuz and Tajul Baharuddin, Mohamad Faizal and Adnan, Mohd Shalahuddin (2017) Forecasting of groundwater level using artificial neural network by incorporating river recharge and river bank infiltration. MATEC Web of Conferences, 103 (04007). pp. 1-11. ISSN 2261236X

Noh@Seth , Nur Hazirah (2017) Parametric study on the design of baffle for three-dimensional turning diffuser. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Norazam, Putri Nur Farah Izzati and Bakar, Ismail and Lim, Alvin John Meng Siang and Herman, Herman Shah (2017) Stabilization of peat soil by using Envirotac. MATEC Web of Conferences, 103 (07014). pp. 1-7. ISSN 2261236X

Nordin, N. and Seri, S. M. and Taib, I. and Mohammed, A. N. and Abdullah, M. K. and Sapit, A. (2017) Secondary flow vortices and flow separation of 2-D turning diffuser via particle image velocimetry. In: International Research and Innovation Summit (IRIS2017), 6-7 May 2017, Kings Green Hotel, Malaysia.

Nordin, Normayati and Abdul Karim, Zainal Ambri and Othman, Safiah and Raghavan, Vijay R. and Mohideen Batcha, Mohd Faizal and Hariri, Azian and Basharie, Siti Mariam (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. AIP Conference Proceedings, 1831 (020021). pp. 1-9. ISSN 15517616

O

Oluyinka, Solomon Ayodele (2017) The role of trust as a mediator in the relationship between technology factors and intention to accept internet banking in Nigeria. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Nurul Aswa (2017) A hybrid semantic similarity feature-based to support multiple ontologies. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Roslan (2017) Mass transfer of Cd, Hg, As, DDT and chlordane by adsorption onto granular activated carbon. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Norliza (2017) Implementation of Luo-Rudy phase I cardiac cell excitation model in FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurhidayah (2017) Persepsi terhadap sistem pembelajaran elektronik dalam kalangan pelajar Kolej Poly-Tech Mara Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

P

P. Gomez, Christy and U. Raji, Abdulazeez (2017) Investigating organizational capability vis-à-vis human action to minimize post-contract transaction costs in D&B projects. In: 25th Annual Conference of the International Group for Lean Construction, 9-12 Jul 2017, Heraklion, Greece.

Padil, Suhaili (2017) Kerangka kemahiran employability senibina graduan politeknik. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Pairan, Mohamad Rasidi (2017) Fine nozzle characteristics for increasing filtration efficiency in commercial kitchen hood ventilation system. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Pathan, Erum and Zulkifli, Shamsul Aizam (2017) Passive damping techniques with LCL filter in inverter-grid connected. Pertanika Journal of Science & Technology, 25 (S). pp. 45-52. ISSN 01287680

Periyasamy, Raveverma (2017) The feasibility of SBR/EVA and TPU/PCL composite material for fused deposition modelling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pipit, Norliza and Esa, Ahmad (2017) Working satisfaction as a teacher. Psychology . pp. 47659-47660. ISSN 229-712X

Pua , P. K. and Lee, M. F. and Lai, C. S. (2017) Identifying mental health elements among technical university students using fuzzy Delphi method. In: International Research and Innovation Summit (IRIS2017), 6-7 May 2017, Kings Green Hotel, Melaka.

Pusppanathan, Jaysuman and Abdul Rahim, Ruzairi and Phang, Fatin Aliah and Mohamad, Elmy Johana and Nor Ayob, Nor Muzakkir and Rahiman, Mohd Hafiz Fazalul and Chan, Kok Seong (2017) Single-plane dual-modality tomography for multiphase flow imaging by integrating electrical capacitance and ultrasonic sensors. IEEE Sensors Journal, 17 (19). pp. 6368-6377. ISSN 15581748

Puteh, Saifullizam and Buhari, Rosnawati (2017) An integration of computational intelligence techniques in engineering data processing for improving forecast accuracy using cubic-spline interpolation and ANN model. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2496-2502. ISSN 18196608

Q

Qasem Rasheda, Hamid Mohammed (2017) Ultra wideband antenna for microwave imaging using modified fractal structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

R

Rachmat, Haris and Mulyana, Tatang and Hasan, Sulaiman and Ibrahim, Mohd Rasidi (2017) Design selection of In-UVAT using MATLAB fuzzy logic toolbox. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 538-545. ISBN 9783319512792

Radin Mohamed, Radin Maya Saphira and Al-Gheethi, A. A. and Abdul Rahman, Junita and Mohd Kassim, Amir Hashim and Musa, Sabariah (2017) Reuse of ablution water to improve peat soil characteristics for ornamental landscape plants cultivation. MATEC Web of Conferences, 103 (05003). pp. 1-8. ISSN 2261236X

Radin Mohamed, Radin Maya Saphira and Apandi, Najeeha and Arifin, Siti Nor Hidayah and Al-Gheethi, Adel Ali Saeed Abduh and Mohd Kassim, Amir Hashim (2017) Heavy metals in microalgae biomass added with different concentration of wet market wastewater. In: Third International Conference on Science, Engineering & Environment (SEE).

Radin Mohamed, Radin Maya Saphira and Othman, Norzila and Mohammad Razi, Mohd Adib (2017) Water and environmental issues (vol 1). Penerbit UTHM, Batu Pahat, Johor. ISBN 9789672110545

Rahmat, Siti Nazahiyah and Jayasuriya, Niranjali and Bhuiyan, Muhammed (2017) Identification of homogeneous areas for drought frequency analysis. International Journal Of Integrated Engineering, 9 (2). pp. 18-26. ISSN 1985854X

Rahmat, Siti Nazahiyah and Mohd Shahli, Fitryaliah (2017) Water and environmental issues (vol 1). In: Water and Environmental Issues (Vol 1). Micropollutant Research Centre (MPRC), pp. 1-184. ISBN 9789672110545

Raji, Abdulazeez Umar (2017) Competency-driven benefits realization model for minimization of post-contract transaction costs in design-build (D&B) delivery systems. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Fazilah (2017) Housing equilibrium price framework for Malaysian middle class group in affordable housing market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Roslinda Hani (2017) Development of chitosan/alginate/silver nanoparticles hydrogel scaffold for soft tissue engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramsy, Him (2017) Effect of high injection pressure and ambient temperature on heat release in biodiesel combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raut, Ashwin Narendra (2017) Development of sustainable material for hybrid wall system to improve indoor thermal performance. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Raut, Ashwin Narendra and Gomez, Christy Pathrose (2017) Development of thermally efficient fibre-based eco-friendly brick reusing locally available waste materials. Construction and Building Materials, 133 . pp. 275-284. ISSN 09500618

Razali, A. A. and Sadikin, A. (2017) Numerical study of velocity and pressure drop in a microchannel using water and Al2O3 nanofluid. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2385-2391. ISSN 18196608

Razali, A. A. and Sadikin, A. and Ibrahim, S. A. (2017) Heat transfer of Al2O3 nanofluids in microchannel heat sink. In: 7th International Conference on Mechanical and Manufacturing Engineering, Sustainable Energy Towards Global Synergy, 1–3 August 2016, Jogjakarta, Indonesia.

Razali, Azlizul Aizat (2017) Investigation of heat transfer in a microchannel heat sink using water and Al2O3 nanofluids. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razman, Ruzaimah (2017) A model of sustainable campus operations for Malaysian public universities. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Ridzuan Aw, Suzanna and Abdul Rahim, Ruzairi and Mohd Yunus, Yusri and Rahiman, Mohd Hafiz Fazalul and Wahab, Yasmin and Mohd Yunus, Fazlul Rahman and Mohamad, Elmy Johana and Abdul Aziz, Azian and Chiew, Loon Goh and Pusppanathan, Jayasuman and Green, R. G. and Tee, Zhen Cong (2017) Image reconstruction of metal pipe in electrical resistance tomography. Sensors & Transducers, 209 (2). pp. 12-19. ISSN 17265479

Risit, Wellson (2017) Identification of biodiesel yield and its properties from microalgae Botryococcus sp isolated at Sembrong dam. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Riza, Fetra Venny (2017) Formulation of compressed stabilized earth brick using black uncontrolled burnt rice husk ash as full cement replacement. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Robin, Rolyselra Orbintang (2017) Kajian terhadap kos pembinaan rumah kos rendah di Sarawak. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rohidin, Dede and Samsudin, Noor A. and Herawan, Tutut (2017) On mining association rules of real-valued items using fuzzy soft set. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 517-528. ISBN 9783319512792

Roslan, A.S.M and Rosli, M.M and Ariffin, L.M and Esa, Ahmad (2017) Why a good environment can increase student involvement for co-curriculum activities in schools? Educational Technology . pp. 47732-47733. ISSN 2229-712X

Roslan, M. S. and Chaudary, K. T. and Haider, Z. and Aziz, M. S. and Ali, J. (2017) Multi-walled carbon nanotubes grow under low pressure hydrogen, air, and argon ambient by arc discharge plasma. Fullerenes, Nanotubes and Carbon Nanostructures, 25 (4). pp. 269-272. ISSN 15364046

Roslan, Nor Atiqah Aima (2017) Service quality through employee knowledge, skills and abilities (KSAs): a study among third party logistics in Iskandar Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, Rosfuzah and Khamsa, Syaza Nazurah and Rokashah, Nurul Shahida Azwa and Othman, Siti Azlin (2017) Sistem inventori makmal komputer Jabatan Teknologi Maklumat, Pusat Pengajian Diploma, UTHM (e-VENTORI). In: Teknologi Maklumat & Aplikasi. Penerbit UTHM, Universiti Tun Hussein Onn Malaysia, pp. 52-59. ISBN 9789673542154

Roslan, Rosfuzah and Mohd Zin, Nur Ariffin and Berahim, Mazniha and Soosay Nathan, Shelena and Omar, Abdul Halim and Jofri, Muhamad Hanif and Md Yasin, Mohd Suhaimi and Surip, Miswan and Masandig, Hannes and Mohamed Ali @ Md Hani, Mohd Hatta (2017) BioSMS : biometric student management system. In: International University Carnival on E-Learning IUCEL 2017, 26-27 September 2017, Nilai, Negeri Sembilan.

Rosli, M.M and Roslan, A.S and Idris, Mohd Safiee and Esa, Ahmad (2017) The significance of co-curricular education in school. Educational Technology . pp. 47721-47722. ISSN 2229-712X

Rosli, Mohd Arif (2017) Potensi tanah gambut, batu kapur, zeolit dan karbon teraktif sebagai penjerap komposit untuk merawat larut resapan. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Naida (2017) An intervention for motorcycle helmet usage based on technology acceptance model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosman, Mohammad Zawawi (2017) Compressibility of solidified dredged marine soils (DMS) by mass treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosman, Mohammad Zawawi and Chan, Chee-Ming (2017) Settlement reduction of dredged marine soils (DMS) admixed with cement & waste granular materials (WGM): 1-D compressibility study. International Journal of GEOMATE, 13 (38). pp. 104-110. ISSN 21862990

Rusdi, Mikdar and Nordin , Shah Rul Anuar and Borham , Abd Shakor and Othman, Hussain and M. Khalid, Halimi and Abdul Rahim, Mohd Hisyam (2017) Haiwan dan tumbuh-tumbuhan dalam Al-Quran dan Al-Hadis. In: Pendayaupayaan Bahasa, Agama dan Transformasi Masyarakat. Penerbit UTHM, pp. 57-80.

Ruzaini, M. S. and Nordin, N. and Sadikin, A. and Mohammed, A. N. and Sapit, A. and Abdullah, K. and Ramli, Y. and Idris, A. F. (2017) Pressure recovery performance of 2-D turning diffuser by varying area ratios and inflow Reynolds numbers. In: 2nd International Conference on Computational Fluid Dynamics in Research and Industry (CFDRI 2017), 3–4 August 2017, Songhkla, Thailand.

S

S. M. Johan, Muhammad Haniff (2017) Assessment on blood flow velocity using doppler technique for circulatory system diagnosis at left ventricle (LV) of the heart. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S.M. Johan, Siti Farhanah and Chan, Chee-Ming (2017) Oedometric study of dredged marine soils admixed with sand for settlement reduction. International Journal of GEOMATE, 13 (38). pp. 59-62. ISSN 21862990

Saad, Shamsaadal Sholeh and Bosok, Fauziah and Damin, Zahrul Akmal and Othman, Hussain and Halim, Harliana and Hamzah, Shahidah (2017) Hubungan tingkah laku kepimpinan ketua pendidikan yang dominan dengan kepuasan kerja pensyarah di politeknik. In: Hubungan tingkah laku kepimpinan ketua pendidikan yang dominan dengan kepuasan kerja pensyarah di politeknik.

Saad Sheggaf, Zayad Mohamed (2017) Investigation of the effect of rare earth additives on solidification of as-cast ZRE1 magnesium alloy. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Saim, S.M.Y and Idris, Mohd Safiee (2017) Co-curriculum management practiced by principle in secondary level. Social Science . pp. 47734-47736. ISSN 2229-712X

Sairi, Nurul Afiqah (2017) Persepsi industri hospitaliti terhadap golongan pekerja berkeperluan khas (masalah pendengaran). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Shukur (2017) An improved firefly algorithm for optimal microgrid operation with renewable energy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salh, Adeeb and Audah, Lukman and M. Shah, Nor Shahida and Hamzah, Shipun A. (2017) Adaptive antenna selection and power allocation in downlink massive MIMO systems. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3521-3528. ISSN 20888708

Salh, Adeeb and Audah, Lukman and M. Shah, Nor Shahida and Hamzah, Shipun A. (2017) Maximizing energy efficiency for consumption circuit power in downlink massive MIMO wireless networks. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 2977-2985. ISSN 20888708

Salim, Salman and Mat Nor, Ahmad Hakimi and Sanik, Mohd Erwan and Osman, Mohammad Hairi and Abdullah, Mohd Sufyan and Sarif, Abd Sukor (2017) Bolts connection technique of bamboo in construction work. IOSR Journal of Mechanical and Civil Engineering (IOSRJMCE), 14 (4). pp. 54-60. ISSN 22781684

Samat, Nurul Ashikin (2017) An improved imputation method based on Fuzzy C-Means and particle swarm optimization for treating missing data. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsi, Mohd Arif and Mustapa, Mohammad Sukri and Badarulzaman, Nur Azam and Mahdi, Ahmed Sahib and Ab Kadir, Muhammad Irfan (2017) The effect of aging on physical characteristics of recycled AA6061 aluminium chips. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2664-2671. ISSN 09754024

Sanik, M. E. and Rahimi, N. F. L. and Hamid, N. B. and Nor, A. H. M. and Prasetijo, J. and Razali, N. F. (2017) Critical gap analysis of merging sections at Kuala Lumpur middle ring road. Journal of Engineering and Technology (JET), 8 (1). pp. 58-68. ISSN 2289814X

Sanmargaraja, Shalini (2017) Provision of accessible facilities for the people with disabilities in the Johor National Parks: case study in Endau-Rompin, Kukup Island and Forest Park Ledang Hill. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Sanusi, Shuaibu Babaji and Abu Bakar, Mohd Fadzelly and Mohamed, Maryati and Sabran, Siti Fatimah and Mainasara, Muhammad Murtala (2017) Southeast Asian medicinal plants as a potential source of antituberculosis agent. Evidence-Based Complementary and Alternative Medicine, 2017 . pp. 1-39. ISSN 1741427X

Sarpin, Norliana and Kasim, Narimah and Zainal, Rozlin (2017) A guidelines for people capability enhancement to support sustainable facility management in infrastructure project. In: International Conference on Studies in Disaster Management, Civil and Architectural Engineering (SDMCAE-17), 18-19 April 2017, Kyoto, Japan.

Sa’at, N. and Samsuri, A. and Hamzah, K. and Sulaiman, H. (2017) Review on the compatibility of non-metal materials in automotive components of diesel engine vehicles with blended biodiesel fuel. Advanced Science Letters, 23 (5). pp. 4728-4732. ISSN 19366612

Seah, Choon Sen and Kasim, Shahreen and Mohamad, Mohd Saberi (2017) Specific tuning parameter for directed random walk algorithm cancer classification. International Journal on Advanced Science, Engineering and Information Technology, 7 (1). pp. 176-182. ISSN 20885334

Selimin, Mohamad Ali (2017) Characterisation and in vitro bioactivity of anodised titanium and hydroxyapatite as implants for biomedical application. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Seswoya, Roslinda (2017) Methane recovery from digesting domestic mixed sewage sludge. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Seswoya, Roslinda and Abdul Karim, Ahmad Tarmizi (2017) Sample biochemical methane potential from the digestion of domestic mixed sewage sludge in batch tests. International Journal on Advanced Science, Engineering and Information Technology, 7 (2). pp. 431-437. ISSN 20885334

Shaari, Muhammad Farid (2017) Development and characterization of the ionic polymer metal composite actuated contractile water jet thruster. PhD thesis, Universiti Sains Malaysia.

Shafin, Noor Afifah (2017) The implementation of persuasive technology principles in mobile application development: a qualitative study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shukri, Muhammad Shazwan (2017) Collapsibility behaviour of ABS P400 and PMMA used as sacrificial pattern in direct investment casting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidek, Azmi (2017) FPGA-based implementation of electronic abacus using Altera DE2 board. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sohu , Samiullah and Abdullah, Abd Halid and Nagapan, Sasitharan and Fattah , Abdul and Ullah, Kaleem and Kumar , Kanesh (2017) Contractors perspective for critical factors of cost overrun in Highway Projects of Sindh, Pakistan. In: AIP Conference Proceedings.

Soon, C. K. and Zaini, Z. and Mohd Ujang, A. and Nagapan, S. and Abdullah, Abd Halid and Hasmori, Muhammad Fikri and Rassiah, K. (2017) A case study of green building in Malaysia: cost saving analysis. Pertanika journal of science & technology, 25 . pp. 191-196. ISSN 0128-7680

Soosay Nathan, Shelena and Berahim, Mazniha and Ramle, Rosni (2017) Rubric for measuring psychomotor and affective learning domain. Pertanika Journal of Social Science and Humanities , 25 . pp. 101-108. ISSN 01287702

Subramaniam, Menega (2017) Comparative study on indoor fungi growth incorporated with different antifungal and wall finishings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sufahani, Suliadi and Che-Him, Norziha and Khamis, Azme and Rusiman, Mohd Saifullah and Arbin, Norazman and Chai, K. Yee and Ramli, Izzati N. and Suhaimi, Nur A. and Seow, S. Jing and Azmi, Zarith A. (2017) Descriptive statistics with Box-Jenkins and marketing research for jewellery company in Malaysia. Far East Journal of Mathematical Sciences, 101 (10). pp. 2151-2161. ISSN 09720871

Suhani, Noorain (2017) Kitchen wastewater treatment by adsorption process using banana trunk fibers (Musa Sapientum) and chitosan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Nurul Nabila (2017) Determination of corporate real estate composition and performance for selected Malaysian public listed companies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulakah, Siti Masrah (2017) Aplikasi Padlet dalam pengajaran dan pembelajaran komponen sastera (KOMSAS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Supar, Khairi and Ahmad, Hilton (2017) 3-D modelling of single-lap multi-bolted joints under quasi-static conditions. In: AIP Conference Proceedings.

Susiapan, Y. S. and A. R., Ruzairi and Goh, C. L. and R., Hafiz F. and A. R, Herlina (2017) Intensity profile measurement for carbon steel pipe using gamma-ray tomography. International Journal of Integrated Engineering, 9 (2). pp. 1-13. ISSN 26007916

suhadi, S and Warman, Sarebah (2017) Research proposal: effectiveness of curriculum activity towards the establishment of identity of students of higher education institutions in the present. Educational Technology . pp. 46895-46896. ISSN 2229-712X

T

Tajul Baharuddin, Mohamad Faizal and Ahmad Tajuddin, Saiful Azhar and Zainal Abidin, Mohd Hazreek and Madun, Aziman (2017) Modelling technique for the assessment of the sub-soil drain for groundwater seepage remediation. MATEC Web of Conferences, 103 (04010). pp. 1-8. ISSN 2261236X

Tajul Baharuddin, Mohamad Faizal and Ahmad Tajuddin, Saiful Azhar and Zainal Abidin, Mohd Hazreek and Madun, Aziman (2017) Modelling technique for the assessment of the sub-soil drain for groundwater seepage remediation. In: MATEC Web of Conferences.

Tajul Baharuddin, Mohamad Faizal and Ahmad Tajuddin, Saiful Azhar and Zainal Abidin, Mohd Hazreek and Madun, Aziman (2017) Modelling technique for the assessment of the sub-soil drain for groundwater seepage remediation. In: MATEC Web of Conferences.

Talib, Norfazillah (2017) Performance evaluation of biodegradable metalworking fluids for machining process. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tee , Tze Kiong and Saien, Shanty and Yee , Mei Heong and Mohamad, Mimi Mohaffyza (2017) TRIZ: an alternate way to solve problem for student. International Journal of Academic Research in Business and Social Sciences, 7 (2). ISSN 22226990

Tey, Jia Sin and Kai Chen, Goh and Ang, Peniel Soon Ern (2017) Sustainable impact of landfill siting towards urban planning in Malaysia. In: World Multidisciplinary Civil Engineering-Architecture-Urban Planning Symposium - WMCAUS, 12–16 June 2017, Prague, Czech Republic.

Thomas, Charles MacWright and A. Majid, Huda and Zainal Abidin, Zuhairiah and Dahlan, Samsul Haimi and A. Rahim, Mohamad Kamal and Dewan, Raimi (2017) A Study on V-shaped microstrip patch MIMO antenna. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 606-611. ISSN 25024760

Tiong, W. K. and Tay , K. G. and Ong, C. T. and Chiew, K. L. (2017) Simulation of undular bores evolution with damping. Dynamics of Continuous, Discrete and Impulsive Systems Series B: Applications & Algorithms, 24 (2). pp. 113-126. ISSN 14928760

Tuan Ismail, Tuan Noor Hasanah (2017) A critical performance study of innovative lightweight fill to mitigate settlement of embankment constructed on peat soil. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Mohd Yasin, Sharifah Nurulhuda (2017) Kerangka penambahbaikan pelaksanaan program Diploma Kejuruteraan Mekatronik Politeknik di Malaysia. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Tukiman, Mohd Mustaqim (2017) Performances of a spark ignition (SI) engine fuelled with liquefied petroleum gas (LPG) using liquid sequential injection (LSI) technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

U

Uddin, Jamal (2017) Empirical analysis of rough set categorical clustering techniques based on rough purity and value set. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Umar, Abdullahi (2017) Study on the antecedents of information technology adoption in the Nigerian small and medium scale enterprises. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Usman, Abubakar Sadiq (2017) The mediating infuence of entrepreneurial empowerment on the linkage between Islamic microfinance services and clients’ well-being in Malaysia: perceived assesment of service provider. PhD thesis, Universiti Tun Hussein Onn Malaysia.

V

Vadanayagam Stephen, Alvin Jacob (2017) Quantification of arm joint motion for monitoring badminton performance using MEMS based wearable sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

W

Wagner, Jürgen P. and Grigg, Nigel and Mann, Robin and Mohammad, Musli (2017) High task interdependence: job rotation and other approaches for overcoming ingroup favoritism. Journal of Manufacturing Technology Management, 28 (4). pp. 485-505. ISSN 1741038X

Wahab, Norhaliza (2017) Effect of reconstituted method on shear strength properties of peat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Ibrahim, Wan Mastura and Hussin, Kamarudin and Abdullah, Mohd Mustafa Al Bakri and Abdul Kadir, Aeslina (2017) Geopolymer lightweight bricks manufactured from fly ash and foaming agent. AIP Conference Proceedings, 1835 (1). pp. 1-5. ISSN 15517616

Wan Zahari, Wan Zubaidie (2017) The effect of surface treatment on composite interface, tensile properties and water absorption of sugar palm fiber/polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Warman, Sarebah and Amran, Nur'izzati Aqirah and Esa, Ahmad (2017) Skills framework for initial co-curricular teacher preparation programmes. Educational Technology . pp. 46131-46132. ISSN 2229-712X

Watisin, Wazli (2017) Pelaksanaan program pembelajaran berasaskan kerja politeknik bersama industri. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Wei, Chuan Beng (2017) UTHM CEO@Faculty: entrepreneurship-finding your first customer. [Video]

Wijeyesekera, Devapriya Chitral and Ratha, Nurvin and Lim, Alvin John Meng Siang (2017) Critique on the conceptual developments of innovative practices with lightweight fills. MATEC Web of Conferences, 103 (07015). pp. 1-8. ISSN 2261236X

Wijeyesekera, Devapriya Chitral and Wooi, Eric Kee Loh and Lim, Alvin John Meng Siang (2017) Sustainable hydraulic barrier design technologies for effective infrastructure engineering. MATEC Web of Conferences, 103 (04022). pp. 1-9. ISSN 2261236X

Wong, Soon Chuan (2017) Development of a flicking system for producing 3-dimensional cells in microbeads. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yaacob, Mat Tawi (2017) A study of public parking facilities at HUSM Kubang Kerian. Other thesis, Univ Tun Hussein Onn Malaysia.

Yahya, Sufiah (2017) Physical and mechanical behaviour of polysiloxane filled silica sheet. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yahya Sayegh, Ahmed Mohammed (2017) Radiated emissions of electrically long PCB based on imbalance difference and dipole antenna models. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yee, Mei Heong and Tee, Tze Kiong and Mohamad, Mimi Mohaffyza and Md Yunos, Jailani and Widad, Othman (2017) The difference between polytechnic students’ learning styles and their higher order thinking skills level. Pertanika Journal . pp. 233-246. ISSN 0128-7702

Yeo, S. W. and Ling , Felix N. L. and Low, V. S. and Toh, K. L. (2017) Physico-chemical properties of kaolin-organic acid. MATEC Web of Conferences, 103 (07012). pp. 1-6. ISSN 2261236X

Yeoh, Li Cheng (2017) Investigation of perceptual learning style of CFL learners: the case of Mandarin classes at Universiti Tun Hussein Onn Malaysia (UTHM). In: Prosiding Persidangan Antarabangsa Kelestarian Insan 2017 (INSAN2017), 1– 2 November 2017, Malacca, Malaysia.

Yim , Ling Loo and Tang, Alicia Y. C. and Ahmad, Azhana and Mustapha, Aida (2017) A generic agent-based dynamic process simulation framework: a self-adaptive modelling approach. Journal of Theoretical and Applied Information Technology, 95 (2). pp. 340-351. ISSN 18173195

Yoshito, Ito (2017) UTHM FKMP lecture series: quick absorbing structures. [Video]

Yousuf, Muna (2017) Examining the role of trust in shaping customer satisfaction of mobile banking. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusof, Mohd Fairus and Abd Khalid, Md Nor Faliq and Ahmad Tajudin, Saiful Azhar and Madun, Aziman and Zainal Abidin , Mohd Hazreek (2017) Correlation of JKR probe with undrained shear strength. In: MATEC Web of Conferences.

Yusof, Rozianiwati and Kasmiran, Khairul Azhar and Mustapha, Aida and Mustapha, Norwati and Mohd Zin, Nor Asma (2017) Techniques for handling imbalanced datasets when producing classifier models. Journal of Theoretical and Applied Information Technology, 95 (7). pp. 1425-1440. ISSN 18173195

Yusof, Yusniza (2017) Kesan pembelajaran berasaskan contoh kerja terhadap beban kognitif dan pencapaian akademik pelajar kejuruteraan elektrik. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf, Nur Kamilah (2017) Effects of hot press forging parameter and life cycle assessment in direct recycling of AA6061 aluminium. PhD thesis, Universiti Tun Hussein Onn Malaysia.

yapin, H and Suhadi, N and Esa, Ahmad (2017) Implementation of Green Skills through the co-curriculum activities among students Technical and Vocational Education Training (TVET) towards development of Green Industry. Social Science . pp. 47295-47297. ISSN 2229-712x

Z

Zabri, Amerrul and A. Rahim, Mohamad Kamal and Zubir, Farid and Muhamad Nadzir, Norsaidah and A. Majid, Huda (2017) Video monitoring application using wireless sensor node with various external antenna. Indonesian Journal of Electrical Engineering and Computer Science, 6 (1). pp. 148-154. ISSN 25024760

Zager Al Saedi, Ahmed Khalaf and Ghazali, Rozaida and Mat Deris, Mustafa (2017) A new multi objective optimization to improve growth domestic produce of economic using metaheuristic approaches: case study of Iraq economic. In: Advances in Intelligent Systems and Computing. Recent Advances on Soft Computing and Data Mining, 549 . Springer International Publishing, pp. 496-505. ISBN 9783319512792

Zahari, Pauzi (2017) Pembangunan kerangka penyeliaan sekolah yang berkesan di Bintan Kepulauan Riau. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Mohamad Rusydi (2017) Pencirian pelindungan laga tiub silinder fungsi gentian semula jadi/epoksi bergred menggunakan emparan mendatar. PhD thesis, Universiti Tun Hussein Onn Malaysia.

Zainol, Nur Zainatul Nadra and Abdul Majid, Latifah (2017) Studied controversial issues and analyze Nasr Hamid Abu Zayd thoughts contained in voice of exile: reflections on Islam. Advanced Science Letters, 23 (5). pp. 1-5. ISSN 1936-6612

Zainol, Nur Zainatul Nadra and Abdul Majid, Latifah (2017) Kajian terhadap sumber rujukan dalam karya-karya Nasr Hamid Abu Zayd. In: Persidangan antarabangsa sains sosial dan kemanusiaan 2 (pasak 2) Sub-tema: nilai-nilai sejagat.

Zainol, Nur Zainatul Nadra and Syed Abdullah, Syed Muhammad Dawilah al-Edrus and Saparudin, Intan Farhana (2017) Kajian sumbangan Sayyid Alwi Bin Tahir Al-Haddad dalam pengembangan islam di Johor: Analisis sumbangan dalam fatwa-fatwa Negeri Johor. In: PROSIDING NADWAH ULAMA NUSANTARA (NUN) VII, 8-9 OGOS 2017, 8-9 OGOS 2017, Johor.

Zainudin, Amira Syuhada (2017) Dynamic weighted idle time heuristic for flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainudin, Fathin Liyana and Mahamad, Abd Kadir and Saon, Sharifah and Zakaria, Rozana (2017) Material surfaces identification from photo images. In: Innovative Computational Methods of Acoustics Parameters. Penerbit UTM Press, pp. 47-57. ISBN 9789835214417

Zaman, I. and Rozlan, S. A. M. and Yusoff, A. and Madlan, M. A. and Chan, S. W. (2017) Theoretical modelling of sound radiation from plate. IOP Conference Series: Materials Science and Engineering, 165 (012023). ISSN 1757899X

Zamri, Aina Naseha (2017) Pembangunan kerangka kerja profesional pengurusan harta tanah wakaf (PHTW) di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zayadi, Nadzirah (2017) Performance of powdered and granular sugarcane bagasse activated carbon in removing pollutants of car wash wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zayadi, R. A. and Abu Bakar, F. (2017) Comparative study on the performance of Au/F-TiO2 photocatalyst synthesized from Zamzam water and distilled water under blue light irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 346 . pp. 338-350. ISSN 10106030

Zulfadly, Teuku Muhammad (2017) Factor of work accident in Indonesian construction site: Medan, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkipli, Muhammad (2017) Electrical-field activated sintering and forming of micro-components. PhD thesis, University of Strathclyde.

This list was generated on Fri Dec 14 00:48:45 2018 MYT.