Items where Year is 2017

Article

A Hamid, Isredza Rahmi and Ab Sukor, Nurul Hatun and Mohd Foozy, Cik Feresa and Abdullah, Zubaile (2017) Network monitoring system to detect unauthorized connection. Acta Electronica Malaysia (AEM), 1 (2). pp. 13-16. ISSN 2590-4043

A Mostafa, Salama and Ahmad, Mohd Sharifuddin and Mustapha, Aida and Mohammed, Mazin Abed (2017) Formulating layered adjustable autonomy for unmanned aerial vehicles. International Journal of Intelligent Computing and Cybernetics, 10 (4). pp. 430-450. ISSN 1756-378X

A. Bakar, N. and Roslan, R. and Ali, M. and Karimipour, A. (2017) Mixed convection in an inclined lid-driven square cavity with sinusoidal heating on top lid. ARPN Journal of Engineering and Applied Sciences, 12 (8). ISSN 1819-6608

A. F. Yahaya, Jabbar and Mansor, Muhamad (2017) Switching speed improvements in multiphase buck converter via two-shunt voltage-sources. Journal of Applied Environmental and Biological Sciences, 7 (6S). pp. 1-6. ISSN 2090-4274

A. Jawhar, Yasir and Shah, Nor Shahida and A. Taher, Montadar and N. Ramli, Khairun and S. Ahmed, Mustafa and Abdulhasan, R. (2017) A low PAPR performance with new segmentation schemes of partial transmit sequence for OFDM systems. International Journal of Advanced and Applied Sciences, 4 (4). pp. 14-21. ISSN 2313-626X

A. Kadir, A. and Sarani, N. A. and Zaman, N. N. and Abdullah, Mohd Mustafa Al Bakri (2017) Feasibility study on utilization of palm fibre waste into fired clay brick. Advanced Materials Engineering and Technology V, 1835 (1). 020039 (1)-020039 (6). ISSN 0094243X

A. Y., Maizatul and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel A. and Amir Hashim, M. K. (2017) An overview of the utilisation of microalgae biomass derived from nutrient recycling of wet market wastewater and slaughterhouse wastewater. International Aquatic Research. pp. 1-7. ISSN 2008-4935

A. Yahaya, J. and Mansor, Muhamad and Hadi, Abdul (2017) Digital current sensing in modular multilevel converter for HVDC applications. Journal of Engineering & Applied Sciences, 12 (3). pp. 617-621. ISSN 1816-949X

A.A.Emhemed, Abdulrahman and Alsseid, Aleisawee and Hanafi, Dirman (2017) Modelling and controller design for temperature control of power plant heat exchanger. Universal Journal of Control and Automation, 5 (3). pp. 49-53. ISSN 2331-6500

A.B., Suriania and M.D., Nurhafizaha and A., Mohamed and M.H., Mamat and M.F., Malek and M.K., Ahmad and A., Pandikumar and N.M., Huang (2017) Enhanced photovoltaic performance using reduced graphene oxide assisted by triple-tail surfactant as an efficient and low-cost counter electrode for dye-sensitized solar cells. Optik, 139. pp. 291-298. ISSN 0030-4026

Ab Mannan, Nurhabibah Nabilah and Razali, Sufia Aqilah and Shamsuddin, Suhadir and Noh, Mohamad Zaky (2017) Crystalline phase, surface morphology and electrical properties of monovalent-doped Nd0.75Na0.25Mn1-yCoyO3 manganites. Journal of Science and Technology, 9 (3). pp. 65-69. ISSN 2229-8461

Ab. Latiff, Maizatul Azmah and Wan Mohamed, Wan Azlinda and Mohd Azrani, A. (2017) Collaboration among teachers in inclusive special education program classrooms. Advanced Science Letters, 23 (9). pp. 8316-8321. ISSN 1936-7317

Abang Zaidel, Dayang Norulfairuz and Md Rashid, Jamaeyah and Hamidon, Nurul Hazirah and Md. Salleh, Liza and Mohd Kassim, Angzzas Sari (2017) Extraction and characterisation of pectin from dragon fruit (hylocereus polyrhizus) peels. Chemical engineering Transactions, 56. pp. 805-810. ISSN 2283-9216

Abas, M.A. and Wan Salim, W.S. and Ismail, M.I. and Rajoo, S. and Martinez-Botas, R. (2017) Fuel consumption evaluation of SI engine using start-stop technology. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 2967-2978. ISSN 2289-4659

Abas, Muhamad Azahar and Wee, Seow Ta (2017) The constraints of good governance practice in National Solid Waste Management Policy (NSWMP) implementation in Malaysia. Advanced Science Letters, 24 (6). pp. 4704-4709. ISSN 978073541573

Abas, Nor Haslinda and Adman, Nurjeha and Deraman, Rafikullah (2017) Development of occupational safety and health requirement management system (OSHREMS) software using adobe dreamweaver CS5 for building construction project. MATEC Web of Conferences, 103. pp. 1-8. ISSN 2261-236X

Abd Baser, Jamil and Hasan, Azman and Asha’ri, Aifaa Husna and Khairudin, Moh. (2017) A study on the transferable skills of the engineering students at Universiti Tun Hussein Onn Malaysia. Jurnal Pendidikan Teknologi dan Kejuruan, 23 (3). pp. 1-8. ISSN 2477-2410

Abd Ghani, Mohd Khanapi and Mohammed, Mazin Abed and Ibrahim, Mohammed S. and Mostafa, Salama A. and Ahmed Ibrahim, Dheyaa (2017) Implementing an efficient expert system for services center management by fuzzy logic controller. Journal of Theoretical and Applied Information Technology, 95 (13). pp. 3127-3135. ISSN 1992-8645

Abd Halim, Muhamad Rais and Mahdin, Hairulnizam and Yaacob, Siti Salwani (2017) Web transcript verification using check digit as secure number. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-4). pp. 101-105. ISSN 2289-8131

Abd Latif, Amirah and Awang, Noor Azura and Zakaria, Zahariah and Zazali, N. A. and Mustapa, M. A. and Muhammad, F. D. and Muhammad, F. D. and Abu Bakar, M. H. (2017) Passively mode-locked fiber laser by utilizing TTG film on a D-shaped fiber as a saturable absorber. Journal of Science and Technology, 9 (2). pp. 29-33. ISSN 2229-8460

Abd Rahim, Erween and Sasahara, Hiroyuki (2017) Three dimensional finite element modeling, when drilling of Ti-6Al-4V. International Journal of Robotics and Mechatronics, 4 (1). pp. 34-38. ISSN 2288-5889

Abd Rahman, Sa’afilah and Abdul Rahman, Mohammad Ashraf and Adnan, Suraya Hani (2017) An evaluation of important criteria for measuring the facade condition of old shophouses in Malaysia. Asian Journal of Technical Vocational Education and Training, 3 (NIL). pp. 1-4. ISSN 0128-0600

Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Abdullah, Jaafar and Mohmad Ameran, Hanis Liyana (2017) Electrical capacitance tomography: a review on portable ECT system and hardware design. Sensor Review, 36 (1). pp. 64-70. ISSN 0260-2288

Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Subki, Shamsul Rahimi and Ahood, Abdul Latiff and Kadmin, Ahmad Fauzan and Naim @ Mohayat, Mohd Hariz and Ahmad, Mazran and Mohd Taha, Mohd Aliff (2017) Design of non destructive testing on composite material using parallel plate electrical capacitance tomography: a conceptual framework. Jurnal Teknologi (Sciences & Engineering), 79 (5-2). pp. 71-76. ISSN 2180–3722

Abd Razak, Saiful Izwan and Hamzah, Mohd Syahir Anwar and Foong, Choi Yee and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2017) A review on medicinal properties of saffron toward major diseases. Journal of herbs, spices & medicinal plants. pp. 1-19. ISSN 1049-6475

Abd Samad, Noorazman and Tuan Ahmad, Tuan Aidil and Ismail, Affero and Amiruddin, Mohd Hasril and Mohd Nor, Siti Nor Fazelah (2017) Kerangka pembelajaran berasaskan proses kerja Kurikulum Standard Kolej Vokasional (KSKV) Diploma Vokasional Malaysia. Online Journal for TVET Practitioners (OJ-TP), 7 (1). pp. 1-13. ISSN 2289-7410

Abd Samad, Noorazman and Wan Ahmad, Wan Mohd Rashid and Lai, Cee Sern and Harun, Hairuddin and Awang, Halizah and Ismail, Affero (2017) Explanatory domain and indicator for integration public skill training institute with private training center for automotive industry trainees explanatory domain and indicator for integration public skill training Institute with private training center for automotive industry trainees. Advanced Science Letters, 23 (2). pp. 1158-1161. ISSN 1936-6612

Abd. Rahman, Ramhuzaini and Sepehri, Nariman (2017) Experimental comparison between proportional and PWM-solenoid valves controlled servopneumatic positioning systems. Transactions of the Canadian Society for Mechanical Engineering, 41 (1). pp. 65-83. ISSN 0315-8977 (Submitted)

Abdol Rahman, Mohd Nasrull and Masood, Ibrahim and Awalludin, Nur Farahanim and Hassan, Mohd Fahrul (2017) Ergonomic risk factors associated with muscuslokeletal disorders in computer workstation. International Journal of Applied Engineering Research, 12 (7). pp. 1355-1359. ISSN 0976-4259

Abdol Rahman, Mohd Nasrull and Mohamad, Siti Shafika (2017) Review on pen-and-paper-based observational methods for assessing ergonomic risk factors of computer work. WORK: A Journal of Prevention, Assessment & Rehabilitation, 57 (1). pp. 69-77. ISSN 1051-9815

Abdol Rahman, Mohd Nasrull and Muhamad Jaffar, Mohd Syahir (2017) Musculoskeletal symptoms and ergonomic hazards among room attendants in hotel industries. Human Factors and Ergonomics Journal (HFEJ), 1 (2). pp. 25-34. ISSN 2590-3705

Abduh Algheethi, Adel Ali Saeed and Mohamed, R. M. and Efaq, A. N. and Norli, I. and Adib, M. R. and Amir, H. M. K. (2017) Reduction of bacteria in storage system of sewage effluents. Sustainable Water Resources Management, 3 (NIL). pp. 193-203. ISSN 2363-5037

Abduh Algheethi, Adel Ali Saeed and RMSR, Mohamed and Wurochekke, A. A. and Nurulainee, NR and Mas Rahayu, J and Hashim, MK (2017) Efficiency of moringa oleifera seeds for treatment of laundry wastewater. MATEC Web of Conferences, 103 (NIL). pp. 1-8. ISSN 2261-236X

Abdul Awal, A.S.M. and Wan Ibrahim, Mohd Haziman and Mohd Ali, Ahmad Zurisman and Hossain, M. Zakaria (2017) Mechanical properties and thermal behaviour of two-stage concrete containing palm oil fuel ash. International Journal of GEOMATE, 12 (32). pp. 166-175. ISSN 2186-2990

Abdul Ghaffar, Idris and Haji Mohd, Mohd Norzali (2017) Presentation attack detection for face recognition on smartphones: a comprehensive review. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8). pp. 33-38. ISSN 2180-1843

Abdul Hadi, Fatin Shaqira and Zakaria, Zahariah and Awang, Noor Azura and Azmi, Atiqah Nabieha (2017) The generation of dual wavelength pulse fiber laser using fiber bragg grating. Journal of Science and Technology, 9 (3). pp. 92-95. ISSN 2229-8460

Abdul Kadir, Zulida and Abdullah, Nor Hazana and Anthony, Elizabeth M. and Mohd Salleh, Berhannudin and Kamarulzaman, Robijah (2017) Exploring the effectiveness of tasks in problem-based learning as an instructional approach of learning among science and technology students of Universiti Tun Hussein Onn, Malaysia. Jurnal Tekno-Sosial, 198 (NIL). pp. 1-12. ISSN 2229-8940

Abdul Rahim, Herlina and Zulkifli, Syahidah Nurani and Mohd Subha, Nurul Adilla and Abdul Rahim, Ruzairi and Zainal Abidin, Hafilah (2017) Water quality monitoring using wireless sensor network and smartphone-based applications: a review. Sensors & Transducers, 209 (2). pp. 1-11. ISSN 2306-8515

Abdul Rahman, Hisyam and Ahmad Kamal, Ahmad Arsyad and T. Narayanan, Aqilah Leela (2017) A simple upper limb rehabilitation trainer. International Journal of Integrated Engineering (IJIE), 9 (3). pp. 39-43. ISSN 2229-838X

Abdul Razak, Muhammad Thariq and Chuah, Chai Wen (2017) Staff attendance system using RFID. International Journal on Informatics Visualization, 1 (4-2). pp. 250-255. ISSN 2549-9610

Abdul Samad, Abdul Aziz and Ali, Noorwirdawati and Mohamad, Noridah and Jayaprakash, J. and Kong, Fah Tee and Mendis, Priyan (2017) Shear strengthening and shear repair of 2-span continuous RC beams with CFRP strips. Journal of Composites for Construction, 21 (3). ISSN 1090-0268

Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Samion, Syahrullail (2017) Tribological performance of modified jatropha oil containing oil-miscible ionic liquid, for machining applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1738-494X

Abdulameer Hussein, Ahmed and Putra Jaya, Ramadhansyah and Abdul Hassan, Norhidayah and Yaacob, Haryati and Huseien, Ghasan Fahim and Wan Ibrahim, Mohd Haziman (2017) Performance of nanoceramic powder on the chemical and physical properties of bitumen. Construction and Building Materials, 156. pp. 496-505. ISSN 0950-0618

Abdulhameed, M. and Vieru, D. and Roslan, R. (2017) Magnetohydrodynamic electroosmotic flow of Maxwell fluids with Caputo–Fabrizio derivatives through circular tubes. Computers and Mathematics with Applications, 74. pp. 2503-2519. ISSN 0898-1221

Abdulhameed, Mohammed Abdulmunem and Dzarfan Othman, Mohd Hafiz and Ismail, Ahmad Fauzi and Matsuura, Takeshi and A Rahman, Mukhlis and Harun, Zawati and Puteh, Mohd Hafiz and Jaafar, Juhana (2017) Preparation and characterisation of inexpensive porous kaolin hollow fibre as ceramic membrane supports for gas separation application. Journal of the Australian Ceramic Society, 53. pp. 645-655. ISSN 2510-1560

Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Al Joda, Haider Nadhom Azziz and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Harun, Zawati and A. Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana (2017) Fabrication and characterization of affordable hydrophobic ceramic hollow fibre membrane for contacting processes. Journal of Advanced Ceramics, 6 (4). pp. 330-340. ISSN 2226-4108

Abdulhasan, Raed Abdulkareem and Ramli, Khairun Nidzam and Alias, Rozlan and Hamzah, Shipun Anuar and Audah, Lukman and Salh, Adeeb and O. Mumin, Abdulrashid and Jawhar, Yasir Amer (2017) Symmetrical couple f-shaped notches with high rejection c-band of uwb patch antenna. International Journal on Communications Antenna and Propagation (IRECAP), 7 (7). pp. 619-625. ISSN 2039 – 5086

Abdullah, Mohd Fahmy and Ismail, Rahmah and Sulaiman, Noorasiah and Abdul Talib, Basri (2017) Technical efficiency in transport manufacturing firms: evidence from Malaysia. Asian Academy of Management Journal, 22 (1). pp. 57-77. ISSN 2180-4184

Abdullah, Mohd Noor and Ismail, Mohd Asyraf and Azmi, Azralmukmin and Mohammad Radzi, Hanis and Jamian, Jasrul Jamani (2017) Economic and emission load dispatch solution via artificial bee colony algorithm. Advanced Science Letters, 23 (11). pp. 11158-11161. ISSN 1936-7317

Abdullah, Nur Munirah and Kamarudin, M Saddam and M Rus, Anika Zafiah and Abdullah, M F L (2017) Preparation of conductive polymer graphite (PG) composites. IOP Conference Series: Materials Science and Engineering, 226 (12181). pp. 1-6. ISSN 1757-8981

Abdullah, Nurhanim Saadah and Abd Aziz, Mohd Ismail and Ismail, Affero and Hashim, Suhaizal (2017) Improving educator development by innovation in teaching activity via web 2.0. Mechanical Engineering, Science and Technology International Conference, 203 (NIL). pp. 1-9. ISSN 1757-899X

Abdullah, Nurul Azma and Mohd Rashid, Nurazidah (2017) Acquiring cybercrime evidence on mobile global positioning system (GPS): review. Acta Electronica Malaysia (AEM), 1 (2). pp. 17-19. ISSN 2590-4043

Abdullah, Siti Radziah and Riwayat, Akhtar Izzaty and Hossain, M. Zakaria (2017) Effect of rubber powder particle on the strength of foamed concrete. International Journal of GEOMATE, 13 (38). pp. 129-134. ISSN 2186-2990

Abdullah, Zubaile and Mohd Saudi, Madihah and Anuar, Nor Badrul (2017) ABC: android botnet classification using feature selection and classification algorithms. Advanced Science Letters, 23 (5). pp. 4417-4420. ISSN 1936-6612

Abu Bakar, M.L.A.H. and Esa, A. (2017) Benefit of co-curricular. Elixir Social Science, 103. pp. 45592-45595.

Abu Bakar, Mohd Fadzelly and Sanusi, Shuaibu Babaji and Abu Bakar, Fazleen Izzany and Ong, Jin Cong and Mian, Zakbah (2017) Short communication physicochemical and antioxidant potential of raw unprocessed honey from Malaysian stingless bees. Pakistan Journal of Nutrition, 16 (1). pp. 888-894. ISSN 1680-5194

Abu Bakar, Muhammad Abdul Latiff and Aifat, N. R. and Yaakop, S. and Md Zain, B. M. (2017) A noninvasive molecular approach: exploiting species-locus-specific PCR primers in defeating numts and DNA cross-contamination of cercopithecidae. The Journal of Animal & Plant Sciences, 27 (3). pp. 1015-1053. ISSN 1018-7081

Adeleke, A.O. and Ab. Latiff, Ab Aziz and Al-Gheethi, A.A. and Daud, Zawawi (2017) Optimization of operating parameters of novel composite adsorbent for organic pollutants removal from POME using response surface methodology. Chemosphere, 174 (NIL). pp. 232-242. ISSN 0045-6535

Adeleke, Abdullah and Samsudin, Noor Azah and Mustapha, Aida and Mohd Nawi, Nazri (2017) Comparative analysis of text classification algorithms for automated labelling of quranic verses. International Journal on Advanced Science Engineering Information Technology, 7 (4). pp. 1419-1427. ISSN 2088-5334

Adeyemi, Adegbenga and Kasim, Rozilah and Martin, David (2017) The relevance of lean thinking to sustainable improvement of public office buildings in Nigeria. Journal of Engineering and Applied Sciences, 12 (6). pp. 1365-1376. ISSN 1816-949X

Adnan, Mohd Shalahuddin and Mohd Anuar, Mohd Aliff and Nda, Muhammad and Rahmat, Siti Nazahiyah (2017) Investigation of infiltration rate on soft claythat affecting the ponding time. MATEC Web of Conferences, 103 (NIL). pp. 1-8. ISSN 1816-093X

Adnan, Nur Atikah and Kandasamy, R. and Mohammad, Radiah (2017) Nanoparticle shape and thermal radiation on Marangoni Water, Ethylene Glycol and Engine Oil Based Cu, Al2O3 and SWCNTs. Journal of Material Sciences & Engineering, 6 (4). pp. 1-7. ISSN 2169-0022

Adnan, Suraya Hani and Abadalla, Musab Alfatih Salim and Jamellodin, Zalipah (2017) The mechanical and physical properties of concrete containing polystyrene beads as aggregate and palm oil fuel ash as cement replacement material. AIP Conference Proceedings, 1891 (1). pp. 1-6. ISSN 0094-243X

Ahmad, Azlinnorazi and Yunos, Muhamad Zaini and Harun, Zawati and Hassan, Mohd Fahrul and Adzila, Sharifah and Tajul Arifin, Ahmad Mubarak and Abdol Rahman, Mohd Nasrull and Abdul Haq, Reazul Haq and Baharulrazi, Norfhairna (2017) Performance of polysulfone/PANI membrane for humic acid separation. Chemical Engineering Transactions, 56. pp. 703-708. ISSN 2283-9216

Ahmad, Izah R. and Sufahani, Suliadi and Ali, Maselan and Mohd Razali, Siti Noor Asyikin (2017) A heuristics approach for classroom scheduling using genetic algorithm technique. Journal of Science and Technology, 9 (3). pp. 10-15. ISSN 2229-8462

Ahmad, Kabiru Abdullahi and Abdullah, Mohd Ezree and Abdul Hassan, Norhidayah and Ahmad Daura, Hussaini and Ambak, Kamarudin (2017) A review of using porous ashalt pavement as an alternative to conventional pavement in stormwater treatment. World Journal of Engineering, 14 (5). pp. 355-362. ISSN 1708-5284

Ahmad, M.A. Haikal and Rahim, M. Zulafif and Mohd Fauzi, M. F. and Azis, N. Hafizah and Ismail, A.E. and Hassan, Mohd Fahrul and Arifin, A.M.T. and Yusof, M.S. and Ibrahim, M. Rasidi (2017) Electrical discharge machining of polycrystalline diamond using copper electrode – finishing condition. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012019). ISSN 1757-899X

Ahmad, Nabihah and Lim, Yoong Kang (2017) VLSI implementation of full adder-subtractor design. Journal of Engineering and Applied Sciences, 12 (14). pp. 3752-3757. ISSN 1816-949X

Ahmad, Noor Aliza and Saiful Bahry, Saiful Iswal and Md Ali, Zarina and Mat Daud, Azra Munirah and Musa, Sabariah (2017) Effect of flow resistance in open rectangular channel. MATEC Web of Conferences, 97 (1107). pp. 1-6. ISSN 2261-236X

Ahmad, Nor Aziah and Kenayathulla, Husaina Banu and Idris, Abdul Rahman (2017) Employability skills for hospitality students in Malaysia. MALAYSIAN ONLINE JOURNAL OF EDUCATIONAL MANAGEMENT (MOJEM), 5 (4). pp. 63-86.

Ahmad, Nor Farah Atiqah and Askari, Muhamad and Harun, Sobri and Fadhil, Abu Bakar and Demun, Amat Sairin (2017) Sensitivity analysis of a FAO penman monteith for potential evapotranspiration to climate change. Jurnal Teknologi, 79 (7). pp. 21-30. ISSN 0127-9696

Ahmad, Rabiatul Adawiah and Ali, Ahmad Hadi and Isiyaku, Aliyu Kabiru and Bhari, Bibi Zulaika (2017) Improved resistivity and surface morphology of laser treated Cr/Pd metal contact sputter deposited on Si. Journal of Science and Technology, 9 (3). pp. 101-105. ISSN 2229-8460

Ahmad Latiffi, Nur Atikah and Radin Mohamed, Radin Maya Saphira and Mohd Apandi, Najeeha and Mohd Tajuddin, Ramlah (2017) Preliminary assessment of growth rates on different concentration of microalgae scenedesmus sp. in industrial meat food processing wastewater. MATEC Web of Conferences, 103 (NIL). pp. 1-9. ISSN 2261-236X

Ahmed, Aqeel and Raus, Azli Amin and Wahab, Md Saidin and Kamarudin, Khairu (2017) Effects of selective laser melting parameters on relative density of AlSi10Mg. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2552-2557. ISSN 2319-8613

Ahmed Al-Fadhali, Najib Mohammed and Zainal, Rozlin (2017) A theoretical framework on factors causing delay of construction industries projects. The Social Sciences, 12 (3). pp. 393-399. ISSN 1818-5800

Akiah, Siti Aisyah and Kadir @ Shahar, Hazila (2017) Technical oral presentations: knowledge and practices among technical students. International Journal of Education, Psychology and Counseling, 2 (6). pp. 113-120. ISSN 0128-164X

Akinbola, Kazeem Bolayemi and Md Yassin, Azlina (2017) Contextualisation of the ‘Brickwalls’ of land administration and regulation system affecting the dynamics of formal land market in Nigeria. European Journal of Economic and Financial Research, 2 (2). pp. 73-91. ISSN 2501-9430

Akinbola, Kazeem Bolayemi and Md Yassin, Azlina and Wan Yusoff, Wan Zahari (2017) Validation of the “sladecom” model as a contemporary panacea for the improvement of formal land market in Nigeria. European Journal of Economic and Financial Research, 2 (1). pp. 81-98. ISSN 2501-9430

Akram, Urooj and Ghazali, Rozaida and Mushtaq, Muhammad Faheem (2017) A comprehensive survey on pi-sigma neural network for time series prediction. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3.3). pp. 57-62. ISSN 2289-8131

Al-Gubri, Qusay and Mohd Ariff, Mohd Aifaa (2017) Real-time power system dynamic security assessment based on advanced feature selection for decision tree classifiers. Turkish Journal of Electrical Engineering and Computer Sciences, 26 (NIL). pp. 2104-2116. ISSN 1300-0632

Alhaji Ali, Zannah and Ahmad Latiffi, Aryani and Raji, Abdulazeez Umar and Waziri, Abdullahi Abba and Mohammed, Usman (2017) Causes of low-skilled workers’ performance in construction projects. Traektoriâ nauki, 3 (6). pp. 1-15. ISSN 2413-9009

Alhilali, Manhal and Din, Jafri and Sch¨onhuber, Michael and Hong, Yin Lam (2017) Estimation of millimeter wave attenuation due to rain using 2D video distrometer data in Malaysia. Indonesian Journal of Electrical Engineering and Computer Science, 7 (1). pp. 164-169. ISSN 2502-4752

Ali, A. and Mahmod, S. (2017) Mastering soft skills in the implementation of work-based learning among community college students. SOCIAL SCIENCES & HUMANITIES, 25 (S). pp. 179-190. ISSN 0128-7702

Ali, A. and Mahmod, S. (2017) Mastering soft skills in the implementation of work-based learning among community college students. SOCIAL SCIENCES & HUMANITIES, 25 (S). pp. 179-190. ISSN 0128-7702

Ali, A. and Mahmod, S. (2017) Mastering soft skills in the implementation of work-based learning among community college students. Pertanika Journal of Social Sciences & Humanities, 25 (S). pp. 179-190. ISSN 0128-7702

Alias, A R and Mohd Mokhlis, N A and Zainun, Nur Yasmin (2017) Baseline for food waste generation – a case study in Universiti Tun Hussein Onn Malaysia cafeterias. IOP Conference Series: Materials Science and Engineering, 271 (1). pp. 1-8. ISSN 1757-8981

Al‑Gheethi, A. A. and Mohamed, R. M. and Efaq, A. N. and I., Norli and M., R. Adib and H. M., K. Amir (2017) Reduction of bacteria in storage system of sewage effluents. Sustainable Water Resources Management, 3. pp. 193-203. ISSN 2363-5037

Aman, Fazlina and Wan Mohamad Khazim, Wan Nor Hafizah and Mansur, Syahira (2017) Mixed convection flow of a nanofluid containing gyrotactic microorganisms over a stretching/shrinking sheet in the presence of magnetic field. Journal of Physics: Conference Series, 890 (012027). pp. 1-7. ISSN 1742-6588

Aman, Hananni and Ibrahim, Rosziati (2017) Formalization of versioning rules for XML schema using UML class diagram. Journal of Theoretical and Applied Information Technology, 95 (15). pp. 3652-3661. ISSN 1992-8645

Ambar, Radzi and Zakaria, Muhammad Faiz and Ahmad, Muhammad Shukri and Muji, Siti Zarina and Abd Jamil, Muhammad Mahadi (2017) Development of a home-based wrist rehabilitation system. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3153-3163. ISSN 2088-8708

Amin, Md Ruhul and Zulkifli, Shamsul Aizam (2017) Phase-frequency controlled In virtual synchronous converter for low-voltage microgrid-inverter synchronization. International Journal of Renewable Energy Research (IJRER), 7 (3). pp. 1125-1237. ISSN 1309-0127

Amin, Md. Ruhul and Zulkifli, Shamsul Aizam (2017) A framework for selection of grid-inverter synchronisation unit: harmonics, phase-angle and frequency. Renewable and Sustainable Energy Reviews, 78 (NIL). pp. 210-219. ISSN 1364-0321

Aminnuddin, Hazim Fadli and Abdullah, Mohammad Kamil (2017) Numerical investigation on pitch distance, compound angle and turbulence intensity of double cylindrical film cooling hole geometry. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2503-2508. ISSN 1819-6608

Amiril, S.A.S. and Rahim, E.A. and Syahrullail, S. (2017) A review on ionic liquids as sustainable lubricants in manufacturing and engineering: recent research, performance, and applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526

Amirnordin, Shahrin Hisham and Khalid, Amir and Suardi, Mirnah and Manshoor, Bukhari and Hushim, M F (2017) Effects of fractal grid on spray characteristics and flame development in burner combustion. Journal of Physics: Conference Series, 822 (1). pp. 1-5. ISSN 1742-6588

Amirnudin, Amirul Adlan and Mustafa, Farahiyah and Mohd Asry, Anis Maisarah and Yi, Sy Sim (2017) Vibration based energy harvesting interface circuit using diode-capacitor topologies for low power applications. International Journal of Power Electronics and Drive System (IJPEDS), 8 (4). pp. 1943-1947. ISSN 2088-8694

Amiruddin, Mohd Hasril and Shahril, Nurhayati and Abd Samad, Noorazman (2017) Kebolehgunaan IQ stick game terhadap pelajar masalah pembelajaran dalam mata pelajaran Kemahiran Hidup. Online Journal for TVET Practitioners (OJ-TP), 7 (1). pp. 1-15. ISSN 2289-7410

Ammar, Naji and Sulaiman, Marizan and Mohamad Nor, Ahmad Fateh (2017) Analysis load forecasting of power system using fuzzy logic and artificial neural network. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (3). pp. 181-192. ISSN 2180 – 1843

Amran, Syahila Enera and Abdullah, M Asrul Afendi and Kek, Sie Long and Muhamad Jamil, Siti Afiqah (2017) Analysis of survival in breast cancer patients by using different parametric models. Journal of Physics: Conference Series, 890 (012169). pp. 1-8. ISSN 1742-6588

Anas, Mohd Irham and Khalid, Amir and Zulkifli, Fathul Hakim and Jaat, Norrizam and Hushim, Mohd Faisal and Manshoor, Bukhari and Zaman, Izzuddin (2017) Analysis of the effect of injection pressure on ignition delay and combustion process of biodiesel from palm oil, algae and waste cooking oil. Journal of Physics: Conference Series, 914 (1). pp. 1-7. ISSN 1742-6588

Andsaler, Adiba Rhaodah and Khalid, Amir and Abdullah, Nor Sharifhatul Adila and Sapit, Azwan and Jaat, Norrizam (2017) The effect of nozzle diameter, injection pressure and ambient temperature on spray characteristics in diesel engine. Journal of Physics: Conference Series, 822 (NIL). pp. 1-7. ISSN 1742-6588

Andsaler, Adiba Rhaodah and Khalid, Amir and Jaat, Norrizam (2017) Simulation and modeling of mixture formation under variant ambient condition and injection pressure of biodiesel spray. International Journal of Integrated Engineering, 9 (3). pp. 18-23. ISSN 2229-838X

Arbin, Norazman and Idris, Mohd Safiee and Md Ariffin, Latifah and Mohamad Hamzah, Firdaus and Muhammad Sabri, Shamsul Rijal (2017) On linear and oblong leaves shape model. Far East Journal of Mathematical Sciences (FJMS), 102 (12). pp. 2972-2977. ISSN 0972-0871

Arieef, Mohd Fahmi and Yee, Wen Choon and Mohamad, Mohd Saberi and Deris, Safaai and Napis, Suhaimi and Kasim, Shahreen (2017) A hybrid of integer differential bees and flux balance analysis for improving succinate and lactate production. International Journal on Advanced Science Engineering Information Technology, 7 (4-2). pp. 1615-1620. ISSN 2088-5334

Ashyap, Adel Y. I. and Zainal Abidin, Zuhairiah and Dahlan, Samsul Haimi and A. Majid, Huda and Mohd Shah, Shaharil and Kamarudin, Muhammad Ramlee and Alomainy, Akram (2017) Compact and low-profile textile EBG-based antenna for wearable medical applications. IEEE Antennas And Wireless Propagation Letters, 16. pp. 2550-2553. ISSN 1536-1225

Ashyap, Adel Y.I. and Zainal Abidin, Zuhairiah and Dahlan, Samsul Haimi and A. Majid, Huda and Muhammad, Zuraidah and Kamarudin, Muhammad Ramlee (2017) Parametric analysis of wearable vialess EBG structures and its alication for low profile antennas. TELKOMNIKA, 15 (2). pp. 718-725. ISSN 1693-6930

Audah, Lukman and Sun, Zhili and Cruickshank, Haitham (2017) QoS based admission control using multipath scheduler for IP over satellite networks. International Journal of Electrical and Computer Engineering (IJECE). pp. 31-42. ISSN 2088-8708

Awang, Halizah and Abd Samad, Noorazman and Mohd Faiz, Nur Sofurah and Roddin, Rohayu and Jamilu, Kankia (2017) Relationship between the learning styles preferences and academic achievement. IOP Conf. Series: Materials Science and Engineering, 226 (NIL). pp. 1-5. ISSN 1757-899X

Awang, Halizah and Dollah, Ahmad and Yusof, Yusmarwati and Muhammad Hanafi, Nurfirdawati and Mohd Faiz, Nur Sofurah (2017) Personality and learning styles towards the practical-based approach. International Journal of Information and Education Technology, 7 (7). pp. 539-542. ISSN 2010-3689

Azis, N. Hafizah and Rahim, M. Zulafif and Sa’ude, Nasuha and Rafai, N. and Yusof, M.S. and Tobi, A.L.M. and Sharif, Z.M. and Ibrahim, M. Rasidi and Ismail, A.E. (2017) The influence of injection molding parameter on properties of thermally conductive plastic. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012018). pp. 1-9. ISSN 1757-899X

Aziz, Aqliima and Mohd Foozy, Cik Feresa and Palaniappan, Shamala and Suradi, Zurinah (2017) You tube spam comment detection using support vector machine and k–nearest neighbor. Indonesian Journal of Electrical Engineering and Computer Science, 12 (2). pp. 612-619. ISSN 2502-4752

Azmi, Atiqah Nabieha and Awang, Noor Azura and Zakaria, Zahariah and Abdul Hadi, Fatin Shaqira and Yuzaile, Yushazlina Roshaini (2017) Saturable absorption measurement of platinum as saturable absorber by using twin detector method based on mode-locked fiber laser. Journal of Science and Technology, 9 (3). pp. 96-100. ISSN 2229-8460

Azwani Mohamed, Mimi Nahariah (2017) Ambiguities in english language teaching: designing english for specific purposes courses for a discipline-specific context. LSP International, 4 (2). pp. 37-50. ISSN 0128-723X

Baba, Habu Mallam and Kasim, Rozilah and Aliyu, Aliyu Ahmad and Mammadi, Abubakar (2017) Non-implementation of property rating practice, any impact on community healthcare in Bauchi Metropolis Nigeria? International Journal of Research and Review, 4 (1). pp. 19-30. ISSN 2454-2237

Bahrudin, Ida Aryanie and Abdul Hamid, Mariam and Mohd Dzulkifli, Syarizul Amri and Abdullah, Mohd Ezree (2017) Introduction of database concept courseware evaluation using one-group pre-test post-test experimental design. Advanced Science Letters, 22 (12). pp. 4014-4017. ISSN 1936-6612

Batari, Ahmad and Aman, Mohamad Yusri and Saeed, Saeed Modibbo and Ahmed, Tijjani Yero (2017) Rutting assessment of crumb rubber modifier modified warm mix asphalt incorporating warm asphalt additive. International Research Journal of Engineering and Technology (IRJET), 4 (2). pp. 1239-1244. ISSN 2395-0072

Bello, Muhammad Umar and Martin, David and Kasim, Rozilah and Ahmad Aliyu, Aliyu (2017) Review of community participation and FM services contributions toward provisioning of quality municipal services in Malaysian local authorities. Advanced Science Letters, 23 (9). pp. 9042-9044. ISSN 1936-6612

Bello, Muhammad Umar and Martin, David and Kasim, Rozilah and Ahmad Aliyu, Aliyu (2017) A review of FM services for enhancing and provisioning of optimal quality municipal services for local government in Malaysia. Advanced Science Letters, 23 (9). pp. 9039-9041. ISSN 1936-6612

Bhari, Bibi Zulaika and Ali, Ahmad Hadi and Isiyaku, Aliyu Kabiru and Ahmad, Rabiatul Adawiah (2017) Comparative study of infrared Nd:YAG pulsed laser radiation on Pt thin film. Journal of Science and Technology, 9 (3). pp. 83-86. ISSN 2229-8460

C. Y., Dwee and M. Anthony, Elizabeth (2017) Role and application of study skills for tertiary-level english courses: teacher and student perspectives. Pertanika Journal: Social Sciences & Humanities, 25 (NIL). pp. 225-238. ISSN 0128-7702

Chai, Annie and Chuah, Chai Wen (2017) SHEARS Inc. salon management system. International Journal on Informatics Visualization, 1 (4-2). pp. 246-249. ISSN 2549-9610

Chan, Shiau Wei and Lim, Hui Ting (2017) Manufacturing employees’ big five personality dimensions and their relationship to job satisfaction. Journal of Technology Management and Business, 4 (27). pp. 1-11. ISSN 2289-7224

Chan, Sze Qi and Aman, Fazlina and Mansur, Syahira (2017) Stagnation point flow on bioconvection nanofluid over a stretching/shrinking surface with velocity and thermal slip effects. Journal of Physics: Conference Series, 890 (012026). pp. 1-7. ISSN 1742-6588

Chan, Yi Lin and Esa, Fahmiruddin and You, Kok Yeow and Abdul Kahar, Rosmila and Abbas, Zulkifly (2017) Complex permittivity of materials at broadband frequency using transmission phase shift method. Journal of Science and Technology, 9 (3). pp. 75-82. ISSN 2229-8461

Che Dalim, Che Samihah and Kolivand, Hoshang and Kadhim, Huda and Sunar, Mohd Shahrizal and Billinghurst, Mark (2017) Factors influencing the acceptance of augmented reality in education: a review of the literature. Journal of Computer Sciences, 13 (11). pp. 581-589. ISSN 1549-3636

Chee, Fuei Pien and Tiwari, Anand Kumar and Alias, Afishah and Salleh, Saafie and Abdul Amir, Haider F. (2017) A comparative study between x-rays and gamma-rays irradiation on electrical characteristics of bipolar junction transistors (BJTS). Advanced Science Letters, 23 (2). pp. 1416-1421. ISSN 1936-6612

Chen, K.C. and Salimin, Suriana and Zulkifli, S. A. and Aziz, Rebaz (2017) Single phase inverter system using proportional resonant current control. International Journal of Power Electronics and Drive System (IJPEDS), 8 (4). pp. 1913-1918. ISSN 2088-8694

Chin, Boon Onga and Mohammad, Abdul Wahab and Law, Yong Ng and Mahmoudi, Ebrahim and Azizkhani, Sepehr and Hairom, Nur Hanis Hayati (2017) Solar photocatalytic and surface enhancement of ZnO/rGO nanocomposite: degradation of perfluorooctanoic acid and dye. Process Safety and Environmental Protection, 112 (298-30). pp. 298-307. ISSN 0957-5820

Chin, Susan Tee Suan and Md Yusoff, Rosman (2017) Role of emotional intelligence in enhancing contextual performance. PEOPLE: International Journal of Social Sciences, 3 (2). pp. 2532-2543. ISSN 2454-5899

Chinedu, C. C and Wan Mohamed, Wan Azlinda (2017) A document analysis of the visibility of sustainability in TVE teacher education programme: the case of a Malaysian HEI. Social Sciences & Humanities, 25 (NIL). pp. 201-216. ISSN 0128-7702

Das, Bhagwan and Abdullah, Mohammad Faiz Liew and Mohd Shah, Nor Shahida and Adam Ahmed, Labeeb Mohammed and Pandey, Bishwajeet (2017) Development of new all-optical signal regeneration technique. Wireless Personal Communications, 95 (2). pp. 523-537. ISSN 9296-212X

Das, Bhagwan and Liew Abdullah, Mohammad Faiz and Mohd Shah, Nor Shahida and Adam Ahmed, Labeeb Mohammed and Pandey, Bishwajeet (2017) Development of new all-optical signal regeneration technique. Wireless Personal Communications, 95. pp. 523-537. ISSN 0929-6212

Daud, Z. and Abubakar, M. Hijab and Abdul Kadir, A. and Abdul Latiff, A. and Awang, H. and Abdul Halim, A. and Marto, A. (2017) Batch study on COD and ammonia nitrogen removal using granular activated carbon and cockle shells. International Journal of Engineering, 30 (7). pp. 937-944. ISSN 1728-144X

Daud, Zawawi and Nasir, Nazlizan and Abd Kadir, Aeslina and Abdul Latiff, Ab Aziz and Ahmad, Baharin and Suhani, Noorain and Awang, Halizah and Abdul Halim, Azhar (2017) Treatment of biodiesel wastewater using ferric chloride and ferric sulfate. International Journal of Integrated Engineering, 9 (3). pp. 54-57. ISSN 2229-838X

Daud, Zawawi and Suhani, Noorain and Radin Mohamed, Radin Maya Saphira and Awang, Halizah (2017) Feasibility of banana (Musa sapientum) trunk biofibres for treating kitchen wastewater. Nature Environment and Pollution Technology, 16 (4). pp. 1205-1210. ISSN 0972-6268

Didane, Djamal Hissein and Ab Wahab, Abas and Shamsudin, Syariful Syafiq and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Sofian, Mohd (2017) Assessment of wind energy potential in the capital city of Chad, N’djamena. AIP Conference Proceedings, 1831 (NIL). pp. 1-12. ISSN 0094-243X

Didane, Djamal Hissein and Rosly, Nurhayati and Zulkafli, Mohd Fadhli and Shamsudin, Syariful Syafiq (2017) Evaluation of wind energy potential as a power generation source in chad. International Journal of Rotating Machinery, 2017 (312187). pp. 1-10. ISSN 1023-621X

Elewe, Adel Muhsin and Hasnan, Khalid and Nawawi, Azli (2017) Hybridized firefly algorithm for multi-objective radio frequency identification (RFID) network planning. ARPN Journal of Engineering and Applied Sciences, 12 (3). pp. 834-840. ISSN 1819-6608

Elewe, Adel Muhsin and Hasnan, Khalid and Nawawi, Azli (2017) Optimization of RFID network planning using MDB-FA method. Journal of Telecommunication, Electronic and Computer Engineering (JTEC), 9 (2-12). pp. 7-12. ISSN 2180-1843

Ellena, Thierry and Skals, Sebastian and Subic, Aleksandar and Mustafa, Helmy and Toh, Yen Pang (2017) 3D digital headform models of Australian cyclists. Applied Ergonomics, 59. pp. 11-18. ISSN 0003-6870

Emmanuel, Olajide Sunday and Mohd Diah, Mohd Lizam (2017) A review of the impact of neighbourhood crime on residential property values. Journal of Engineering and Applied Sciences, 12 (5). pp. 1205-1211. ISSN 1816-949X

Eng, Hui Peng and Basri, Hatijah and A. Talip, Balkis (2017) β-Cyclodextrin/lecithin: preparation and characterization. International Journal of Integrated Engineering, 9 (4). pp. 129-132. ISSN 2229-838X

Eng, May Ang and Abdullah, Norazlin and Muhammad, Norhayati and Lizardo, Rona Camille M. (2017) Effect of formulation with papaya sauce as fat replacer on butter cake texture. Journal of Science and Technology, 9 (4). pp. 56-63. ISSN 2600-7924

Esa, Ahmad and Abd. Aziz, Z. S.A.A. and Mohd Salleh, B. and Mohamad,, N. H. (2017) Integrating vocational training in culinary arts and Islamic studies at juvenile rehabilitation centres: Malaysian experience. Journal of Technical Education and Training (JTET), 9 (1). pp. 100-112. ISSN 2229-8932

F. M. S., Noorzehan and A., Anati and M., Syahira and M., Radiah and A. J., Nurul (2017) Boundary layer of a dusty fluid flow over a stretching sheet. Journal of Physics: Conference Series, 819 (1). ISSN 1742-6596

FARN, Fadhlia and MT, Paridah and UMK, Anwar and AH, Juliana and A, Zaidon (2017) Enhancing mechanical properties and dimensional stability of phenolic resin-treated plybamboo. Journal of Tropical Forest Science, 29 (1). pp. 19-29. ISSN 0128-1283

Fang, Ong Huey and Mustapha, Norwati and Mustapha, Aida and Hamdan, Hazlina and Rosli, Rozita (2017) Associative classification framework for cancer microarray data. Advanced Science Letters, 23 (5). pp. 4153-4157. ISSN 1936-6612

Fonseka, H. A. and Ameruddin, A. S. and Caroff, P. and Tedeschi, D. and De Luca, M. and Mura, F. and Guo, Y. and Lysevych, M. and Wang, F. and Tan, H. H. and Polimeni, A. and Jagadish, C. (2017) Supporting information for InP-InxGa1-x as core-multi-shell nanowire quantum wells with tunable emission in the 1.3 – 1.55 μm wavelength range. Electronic Supplementary Material (ESI) for Nanoscale. pp. 1-6.

Gani, Paran and Mohamed Sunar, Norshuhaila and Matias- Peralta, Hazel Monica and Radin Mohamed, Radin Maya Saphira and Abdul Latiff, Ab Aziz and Parjo, Umi Kalthsom (2017) Extraction of hydrocarbons from freshwater green microalgae (Botryococcus sp.) biomass after phycoremediation of domestic wastewater. International Journal of Phytoremediation, 19 (7). pp. 679-685. ISSN 1522-6514

Garba, Abdurrahman and Basri, Hatijah and Nasri, Noor Shawal and Siddiq, Umar Hayatu and Abdul Rahman, Abdul Rasheed (2017) Modeling of lead (II) adsorption on sodium hydroxide treated rice husk: fixed-bed studies. Malaysian Journal of Fundamental and Applied Sciences, 13 (4). pp. 803-806. ISSN 2289-5981

Ghous, Mohd Tarmizi and Ambak, Kamarudin and Hamsaari, Ryan White and Mustapha, Ahmad Sharifuddin (2017) Enhancing road safety behaviour using a psychological and spiritual approaches. MATEC Web of Conferences, 103. pp. 1-7. ISSN 2261-236X

Goh, C.L. and Abdul Rahim, Ruzairi and M. N., Abdullah and F. R., Hafiz and Tee, Z.C. (2017) Event-driven applications for hard-field tomography software modelling of forward and inverse solutions. International Journal of Integrated Engineering, 9 (1). pp. 16-23. ISSN 2229-838X

Goh, Chiew Loon and Abdul Rahim, Ruzairi and Rahiman, Hafiz Fazalul and Tee, Zhen Cong and Abdul Wahad, Yasmin (2017) Simulation and experimental study of the sensor emitting frequency for ultrasonic tomography system in conducting pipe. Flow Measurement and Instrumentation, 54 (NIL). pp. 158-171. ISSN 0955-5986

Goh, H.H. and ., Azuwien Aida and Lee, S.S. and Sim, S.Y. and Goh, K.C. (2017) Predictive direct power control (PDPC) of grid-connected dual-active bridge multilevel inverter (DABMI). International Journal of Power Electronics and Drive System (IJPEDS). pp. 31-40. ISSN 2088-8694

Goh, Hui Hwang and Goh, Kai Chen and Crocker, Flora and Iskandar, Khairunnisa and Qing, Shi Chua and Chin, Wan Ling and Abdul Rahim, Ruzairi (2017) A review on equipment protection and system protection relay in power system. International Journal of Integrated Engineering (IJIE), 9 (4). pp. 7-12. ISSN 2229-838X

Goh, Hui Hwang and Goh, Kai Chen and Rashid, Rina and Syyi, Sim and Qing, Shi Chua and Lee, Sze Sing and Abdul Rahim, Ruzairi (2017) Reliable power system operation plan: steady state contingency analysis. International Journal of Integrated Engineering (IJIE), 9 (4). pp. 21-26. ISSN 2229-838X

Goh, Hui Hwang and Osman, Mohamed Dahir and Mohamed Basaleem, Omer and Qing, Shi Chua and Chin, Wan Ling and Goh, Kai Chen (2017) An overview of out-of-step protection in power systems. International Journal of Integrated Engineering (IJIE), 9 (4). pp. 13-20. ISSN 2229-838X

Halib, Nadia and Nuairy, Nabilah and Ramli, Haslinda and Ahmad, Ishak and Othman, Norinsan Kamil and Md Salleh, Salihatun and Bakarudin, Saiful Bahari (2017) Preliminary assessment of salvadora persica whitening effects on extracted stained teeth. Journal of Applied Pharmaceutical Science, 7 (12). pp. 121-125. ISSN 2231-3354

Hamisu, Mohammed Adamu and Mohd Salleh, Kahirol and Lai, Chee Sern and Abubakar, Auwal (2017) Proposed competency framework for Malaysian Technical And Vocational Education And Training (TVET) teachers. European Journal of Education Studies, 3 (9). pp. 286-299. ISSN 2501-1111

Hamisu, Mohammed Adamu and Mohd Salleh, Kahirol and Lai, Chee Sern and Abubakar, Auwal (2017) Proposed competency framework for Malaysian Technical and Vocational Education and Training (TVET) Teachers. European Journal of Education Studies, 3 (9). pp. 286-299. ISSN 2501 - 1111

Hamisu, Mohammed Adamu and Mohd Salleh, Kahirol and Lai, Chee Sern and Adamu, Babayo Yakubu and Gambo, Kulu (2017) Proposed competency model for technical and vocational education and training (TVET) lecturers teaching in technical colleges, Bauchi State in perspective. Traektoriâ nauki, 3 (9). pp. 4001-4009. ISSN 2413-9009

Hamzah, Ahmad Farhan and Fadzil, Norzubaidah and Wan Ibrahim, Mohd Haziman and Jamaluddin, Norwati and Putra Jaya, Ramadhansyah and Arshad, Mohd Fadzil and Zainal Abidin, Norul Ernida and Dahalan, Nurol Huda (2017) Strength behaviour of coal bottom ash self-compacting concrete exposed to cyclic wtting-drying in seawater. Journal of Engineering and Applied Sciences, 12 (5). pp. 6922-6927. ISSN 1816-949X

Hamzah, N. and Ariffin, A. and Hamid, H. (2017) Web-based learning environment based on students’ needs. IOP Conference Series: Materials Science and Engineering, 226. pp. 1-7. ISSN 1757-8981

Hamzah, Norhasyimah and Zulkiflee, Siti Nadiah and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida and Subramaniam, Tamil Selvan (2017) Pembangunan aplikasi android pembelajaran reka bentuk grafik digital. Online Journal for TVET Practitioners (OJ-TP), 2 (2). pp. 60-66. ISSN 2289-7410

Hanipah, M. H. and Abdullah, A. H. and Che Sidek, N. A. and Yunus, R. and Nagapan, S. and Yassin, M. N. and Muhammad Yazid, M. N. A. W. (2017) Wind characteristics and outdoor thermal comfort assessment in east Malaysia. Pertanika Journal of Science & Technology, 25 (S). pp. 63-72. ISSN 0128-7680

Harir, Adamu Isa and Gana, Bukar Abba and Kasim, Rozilah and Salihu, B. H (2017) The factors influencing municipal solid waste generation in bauchi town, Nigeria. Advanced Science Letters, 23 (9). pp. 9081-9084. ISSN 1936-7317

Hariri, Azian and Mohamad Noor, Noraishah and Paimana, Nuur Azreen and Ahmad Zaidi, Ahmad Mujahid and Zainal Bakri, Siti Farhana (2017) Heavy metals found in the breathing zone,toenails and lung function of welders working in an air-conditioned welding workplace. International Journal of Occupational Safety and Ergonomics, 24 (4). pp. 646-651. ISSN 1080-3548

Haron, Zaiton and Othman, Mohd Hanifi and Lim, Meng Hee and Yahya, Khairulzan and Hainin, Mohd Rosli and Darus, Nadirah and Leong, Mohd Salman (2017) Exterior noise due to interaction of tyre-thermoplastic transverse rumble strips. Archives of Acoustics, 42 (3). pp. 449-457. ISSN 2300-262X

Harun, Amran (2017) The effects of innovation on Malaysian small medium enterprises' brand performance. Journal of Management, 1 (NIL). pp. 1-14. ISSN 0149-2063

Harun, Hairuddin and Abdul Razzaq, Abdul Rasid and Mohd Noor, Siti Noor Fazelah and Bokhari, Norzella and Nik Soh, Nik Zulkarnain (2017) Youth driven engagement in the homestay program. Jurnal Pendidikan Teknologi dan Kejuruan, 23 (3). pp. 250-256. ISSN 0854-4735

Hashim, Mohd Yussni and Mohd Amin, Azriszul and Marwah, Omar Mohd Faizan and Othman, Mohd Hilmi and Mohamed Yunus, Mohd Radzi and Ng, Chuan Huat (2017) The effect of alkali treatment under various conditions on physical properties of kenaf fiber. Journal of Physics: Conference Series, 914. pp. 1-15. ISSN 1742-6588

Hassan, Haswira and Abdullah, Mohammad Kamil (2017) Effects of LoD and PoD in combined-hole film cooling. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2509-2514. ISSN 1819-6609

Hassan, S and Yusof, M S and Ding, S and Maksud, M I and Nodin, M N and Mamat, K A and Sazali, M S and Rahim, M Z (2017) Investigation of carbon nanotube ink with PDMS printing plate on fine solid lines printed by micro-flexographic printing method. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012017). pp. 1-7. ISSN 1757-899X

Hassanaa, Bashir and Maizam, Alias (2017) The imperatives of technical drawing skills in teaching TVET subjects: the case of Nigeria. Journal of Education and Practice, 8 (23). pp. 133-135. ISSN 2222-1735

Hassen, Douread R. and Abdul Samad, Abdul Aziz and A. Azeez, Alyaa (2017) Strengthening of prism beam by using NSM technique with roots planted in concrete. International Journal of Engineering and Technology, 9 (5). pp. 383-386. ISSN 0975-4024

Hauwa, Atiku and Radin Mohamed, Radin Maya Saphira and Abduh Algheethi, Adel Ali Saeed and Wurochekke, A. A. and Amir, H. K. (2017) Harvesting of botryococcus sp. biomass from greywater by natural coagulants. Waste and Biomass Valorization, 9 (19). pp. 1841-1853. ISSN 1877-2641

Hayder, Ali Mohammed and Sapit, Azwan and Abed, Qahtan Adnan (2017) Review of solar thermal storage techniques. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6103-6119. ISSN 1819-6608

Hiromitsu, Takano and Ikuho, Yonezawa and Mitsugu, Todo and Mazlan, Muhammad Hazli and Tatsuya, Sato and Kazuo, Kaneko (2017) Biomechanical study of vertebral compression fracture using finite element analysis. Journal of Applied Mathematics and Physics, 5 (NIL). pp. 953-965. ISSN 2327-4352

Hussain, Hanizan Shaker and Din, Roshidi and Mustapha, Aida and Mansor, Fawwaz Zamir (2017) LSB algorithm based on support vector machine in digital image steganography. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-12). pp. 13-18. ISSN 2289-8131

Hussain, Kashif and Mohd Salleh, Mohd Najib and Shi, Cheng and Naseem, Rashid (2017) Common benchmark functions for metaheuristic evaluation: a review. International Journal on Informatics Visualization, 1 (4-2). pp. 218-223. ISSN 2549-9610

Ibrahim, N. and Esa, Ahmad and Syed Iskandar, S. H. I. and Ahmad Jaafar, A. Z. (2017) The effects of intelligent development and personality development in communications oral skills. Elixir Educational Technology, 107. pp. 47039-47040. ISSN 2229-712X

Ibrahim, Nabilah and Abd Aziz, Nur Shazilah and Abd Manap, Abreeza Noorlina (2017) Vein mechanism simulation study for deep vein thrombosis early diagnosis using CFD. Journal of Physics, 822 (1). pp. 1-6. ISSN 8220-12040

Ibrahim, Siti Aida and Ahmid, Muhamad Nazim (2017) Influence of calcination temperature towards Fe-TiO2 for visible-driven photocatalyst. Materials Science Forum, 888. pp. 435-440. ISSN 1662-9752

Ikhsan, S. N. W. and Abdullah, N. and Yusof, N. and Aziz, F. and Misdan, N. and Hairom, Nur Hanis Hayati (2017) Polyethersulfone/HFO mixed matrix membrane for enhanced oily wastewater rejection. Applied Membrane Science & Technology (AMST), 20 (1). pp. 11-17. ISSN 1823-366X

Ilias, Mohd Rahimman and Esa, Ahmad (2017) Children's psychology development. Elixir Psychology, 107. pp. 46924-46925. ISSN 2229-712X

Isa Harir, Adamu and Kasim, Rozilah (2017) Integrated waste recycling framework for municipal solid waste generated (MSWG) in Bauchi Metropolis, Nigeria. Journal of Applied Sciences & Environmental Sustainability, 3 (7). pp. 57-67. ISSN 2360-8013

Isah, Abdulnasir and Phang, Chang (2017) Operational matrix based on Genocchi polynomials for solution of delay differential equations. Ain Shams Engineering. pp. 1-6. ISSN 2090-4479

Isah, Abdulnasir and Phang, Chang and Phang, Piau (2017) Collocation method based on genocchi operational matrix for solving generalized fractional pantograph equations. International Journal of Differential Equations, 2017 (209731). pp. 1-10.

Isiyaku, Aliyu Kabiru and Ali, Ahmad Hadi and Ahmad, Rabiatul Adawiah and Bhari, Bibi Zulaika (2017) Optoelectronic simulation properties of transparent conducting indium tin oxide for solar cell application. Journal of Science and Technology, 9 (3). pp. 49-54. ISSN 2229-8460

Ismail, Affero and Hassan, Razali and Masek, Alias and Nordin, Abdul Sukor and Jalani, Noor Hisham (2017) The exploratory and confirmatory factor analysis for supervisory input support as the determinant of effective supervision in technology and engineering education. The Social Sciences, 12 (3). pp. 495-501. ISSN 1818-5800

Ismail, Al Emran and Ariffin, A.K. and Abdullah, S. and Ghazali, M.J. (2017) Finite element analysis of j-integral for surface cracks in round bars under combined mode i loading. The International Journal of Integrated Engineering, 9 (9). pp. 1-8. ISSN 2229-838X

Ismail, Al Emran and Awang, M.K. and Mohd Tobi, A. and Ahmad, M.H. (2017) Mode i stress intensity factors of slanted cracks. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3189-3194. ISSN 1819-6608

Ismail, Al Emran and Mat Noor, Fazimah and Mohamad, Zaleha and Madlan, Mohd Amran and Rahim, Mohammad Zulafif and Ibrahim, Mohd Rasidi and Ahmad, Sufizar and Abdol Rahman, Mohd Nasrull and Md Salleh, Salihatun and Sadikin, Azmahani and Mahzan, Shahruddin and Muhd Nor, Nik Hisyamudin (2017) Effect of triggering angles on the crushing mechanisms of hybrid woven kenaf/aluminum hollow cylinders. Journal of Physics: Conference Series, 914 (NIL). pp. 1-8. ISSN 1742-6588

Ismail, Al Emran and Nezere, N. (2017) Numerical simulation of hybrid composite tubes under oblique compression. World Journal of Engineering, 14 (2). pp. 173-177. ISSN 1708-5284

Ismail, Fadillah and Md Yusoff, Rosman and Mohammad Shahabuddin, Abu Saim and Nor Aziz, Ainul Mardhiyah (2017) Migrant workers in Malaysia: does gain outweigh pain? Advanced Science Letters, 23 (9). pp. 8895-8897. ISSN 1936-6612

Ismail, M. Y. and Malik, H. I. and Amin, M. (2017) Design and analysis of dual U slot reflectarray antenna for X-band applications. Journal of Physics: Conference Series (JPCS), 852 (012035). ISSN 1742-6596

Ismail, Mohd Erfy and Ismail, Irwan Mahazir and Razali, Nizamuddin (2017) Video animation as teaching aid for engineering drawing course in Malaysia vocational college. International Journal of Trend in Research and Development, 4 (5). ISSN 2394-9333

Ismail, Mohd Norasri and Md. Fudzee, Mohd Farhan and Ibrahim, Rosziati and Jofri, Muhammad Hanif (2017) Video streaming energy consumption analysis for content adaptation decision-taking. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-4). pp. 143-147. ISSN 2289-8131

Ismail, Noorli and Salleh, Norhafizah and Mohd Yusof, Noor Faezah and Jamellodin, Zalipah and Mohd Jaafar, Mohd Faizal (2017) Strength, water absorption and thermal comfort of mortar bricks containing crushed ceramic waste. Jurnal Teknologi (Sciences & Engineering), 79 (7). pp. 167-173. ISSN 2180–3722

Ismail, Norhasikin and Abdullah, Hasan Zuhudi (2017) Influence of extraction process (pre-treatment time) on the characteristic of black tilapia fish skins gelatin. Materials Science Forum, 888 (NIL). pp. 278-283. ISSN 1662-9752

Jaat, Norrizam and Khalid, Amir and Andsaler, Adiba Rhaodah and Sapit, Azwan and Razali, Azahari and Basharie, Mariam (2017) Effects of ambient temperature and injection pressure on biodiesel ignition delay. Journal of Mechanical Engineering and Sciences, 11 (2). pp. 2723-2733. ISSN 2289-4659

Jamaludin, J. and Zakaria, Z. and Awang, N.A. (2017) Multiwavelength fiber laser in four mode fiber. Optik, 142. pp. 615-620. ISSN 0030-4026

Jofri, Muhammad Hanif and Md Fudzee, Mohd Farhan and Ismail, Mohd Norasri and Abawajy, Jemal (2017) An analysis quality of experience and energy consumption for video streaming via mobile devices. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-3). pp. 15-20. ISSN 2289-8131

Johar, Siti Sarawati and Ani, Fauziah and Zainol, Nur Zainatul Nadra and Saparudin, Intan Farhana and Panatik, Siti Aisyah (2017) The impact of personality trait on the relationship of emotional intelligence and self-esteem. International Journal of Management and Applied Science, 3 (4). pp. 90-94. ISSN 2394-7926

Johar, Siti Sarawati and Md. Yusoff, Rosman and Abd.Rahman, Siti Aisyah Panatik (2017) The influence of personality trait on the relationship of emotional intelligence and self-esteem. International Journal of Management & Applied Science (IJMAS), 3 (3). pp. 6-10. ISSN 2394-7926

Jong, Siat Ling and Lam, Hong Yin and D’Amico, M. and Cuervo, F. and Yunus, M. M. and Din, J. (2017) Impact of link elevation angles on rain attenuation statistics in heavy rain region predicted using the synthetic storm technique. Journal of Telecommunication Electronic and Computer Engineering, 9 (3-8). pp. 17-20. ISSN 2180-1843

Juki, Mohd Irwan and Teddy, T. (2017) An overview of bacterial concrete on concrete durability in aggressive environment. Pertanika Journal: Science and Technology, 25 (NIL). pp. 259-264. ISSN 0128-7680

K., Rahimah and N., Aziati (2017) The integrated framework of cloud computing implementation in higher education institution: a review of literature. Advanced Science Letters, 23 (2). pp. 1475-1479. ISSN 1936-6612

Kamarudin, M.Saddam and M. Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, M. F. L (2017) Dynamic mechanical properties of bio-polymer graphite thin films. IOP Conference Series: Materials Science and Engineering, 9 (1). pp. 1-5. ISSN 1757-8981

Kamis, Arasinah and Alwi, Amarumi and Hj Ismail, Bushra Limuna and Normah, Zakaria and Nur Yunus, Faizal Amin (2017) Integration of green skills in sustainable development in technical and vocational education. International Journal of Engineering Research and Application, 7 (12). pp. 8-12. ISSN 2248-9622

Kamis, Arasinah and Che Rus, Ridzwan and Rahim, Mohd Bekri and Nur Yunus, Faizal Amin and Zakaria, Normah and Mohd Affandi, Haryanti (2017) Exploring green skills: a study on the implementation of green skills among secondary school students. International Journal of Academic Research in Business and Social Sciences, 7 (12). pp. 327-345. ISSN 2222-6990

Kandasamy, Ramasamy and Adnan, Nur Atikah and Mohammad, Radiah (2017) Nanoparticle shape effects on squeezed MHD flow of water based Cu, Al2O3 and SWCNTs over a porous sensor surface. Alexandria Engineering Journal, 57 (3). pp. 1433-1445. ISSN 1110-0168

Kasim, Rozilah and Bello, Muhammad Umar and Ahmad Aliyu, Aliyu and Martin, David (2017) Real estate investment as a panacea for economic instability in Nigeria: evidence from northeastern states of Nigeria. Traektoriâ nauki, 3 (8). pp. 1001-1006. ISSN 2413-9009

Kasim, Rozilah and Bello, Muhammad Umar and Martin, David (2017) Municipal awareness as a tool for enhancing citizen satisfaction in municipal councils of Malaysia. European Journal of Social Sciences Studies, 2 (5). pp. 109-121. ISSN 2501-8590

Kasim, Rozilah and Bello, Muhammad Umar and Martin, David (2017) Municipal awareness as an integral part for enhancing citizen satisfaction of Malaysian municipal councils, Batu Pahat. Traektoriâ nauki, 3 (7). pp. 1-10. ISSN 2413-9009

Kasim, Rozilah and Bello, Muhammad Umar and Martin, David and Abubakar, Muhammad and Umar, Muhammad Akilu (2017) An examination of relationship between quality municipal services and citizen satisfaction in Malaysian local council, Batu Pahat in perspective. Traektoriâ nauki, 3 (5). pp. 1-4. ISSN 2413-9009

Kasim, Rozilah and Ishiyaku, Bala and Harir, Adamu Isa (2017) Confirmatory factoral validity of public housing satisfaction constructs. Congent Business and Management, 4 (NIL). pp. 1-17. ISSN 2331-1975

Kasim, Rozilah and Martin, David and Adeyemi, Adegbenga and Adeyemi, Ifeoluwa Adedoyin (2017) Facilities improvement for sustainability of existing public office buildings in Nigeria. ATBU Journal of Environmental Technology, 10 (1). pp. 12-34. ISSN 1596-6305

Kasim, Shahreen and Omar, Nurul Aswa and Mohammad Akbar, Nurul Suhaida and Hassan, Rohayanti and A. Jabar, Marzanah (2017) Comparison semantic similarity approach using biomedical domain dataset. Acta Electronica Malaysia (AEM), 1 (2). pp. 1-4. ISSN 25904043

Kasinathan, Vinothini and Mustapha, Aida and Yeap, Chee Seong and Zainal Abidin, Aida Zamnah (2017) Footprint: tourism information search based on mixed reality. International Journal on Advanced Science Engineering Information Technology, 7 (4-2). pp. 1504-1509. ISSN 2088-5334

Kasvar, K. K. and Nagapan, S. and Abdullah, A. H. and Ullah, K. and Deraman, R. and Yunus, R. and Sohu, S. (2017) Cost implication analysis of concrete and Masonry waste in construction project. Pertanika Journal of Social Science and Technology, 25 (S). pp. 177-184. ISSN 0128-7680

Kavikumar, J. and Young, Bae Jun and Akram, Muhmmad (2017) Characterizations of fuzzy fated filters of R0-algebras based on fuzzy points. International Journal of Pure and Applied Mathematics, 114 (4). pp. 741-758. ISSN 1311-8080

Kavikumar, J. and Young, Bae Jun and Muhmmad Akram3, Muhmmad Akram (2017) Characterizations of fuzzy fated filters of r0-algebras based on fuzzy points. International Journal of Pure and Applied Mathematics, 114 (4). pp. 741-758. ISSN 1311-8080

Kaw, Wei Ching and Kek, Sie Long and Sim, Sy Yi (2017) Nonlinear least squares parameter estimation problem using Levenberg-Marquardt method. Journal of Environmental Science, Computer Science and Engineering & Technology, 6 (3). pp. 202-313. ISSN 2278–179X

Kazi, Abdul Ghafoor and Md Yusoff, Rosman and Ismail, Fadillah and Munastiwi, Erni and Arisar, Muzammil Muhammad Khan (2017) Entrepreneurship and livelihood restoration at Sindh Pakistan: mediating role of firm performance. Advanced Science Letters, 23 (9). pp. 8138-8143. ISSN 1936-6612

Khalid, Amir and Manshoor, Bukhari and Mohmad Jaat, M. Norrizam and Tajuddin, A. S. A. and Syahrunniza, Hadi and Nursal, Ridwan Saputra and Zaman, I. (2017) Performance and emissions of diesel engine fuelled with preheated biodiesel fuel derived from crude palm, jatropha, and waste cooking oils. International Journal of Automotive and Mechanical Engineering, 14 (2). pp. 4273-4284. ISSN 2229-8649

Khirotdin, Rd Khairilhijra' and Zakaria, Danieal A. and Mohadhir, Munirah (2017) Printing and curing silver conductive ink tracks from modified on-shelf inkjet printer on fabric. International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS, 16 (6). pp. 1-7. ISSN 2227-2771

Khirotdin, Rd. Khairilhijra and Hassan, Nurhafizzah and Yusof, Umiera Asyikin and Mahadzir, Muhammad Adzeem (2017) Investigation of curing silver conductive inks on fabrics using dlp projector and hot plate. Material Science Forum, 887 (NIL). pp. 55-64. ISSN 1660-9336

Khirotdin, Rd. Khairilhijra and Mohamad Zainuri, Mohamad Izwan Saifudin and Ishak, Afiqah Izzati and Hassan, Nurhafizzah and Kamarudin, Khairu and Ibrahim, Mohd. Rasidi and Abdul Haq, Reazul Haq and Ibrahim, Mustafa and Sau’de, Nasuha and Mohd. Faizan Marwah, Omar (2017) Printing and curing of conductive ink track on fabric using syringe deposition system with DLP projector and hot plate. MATEC Web of Conferences, 135 (1). pp. 1-10. ISSN 1816-093X

Khoo, Weily and Koh, Ching Theng and Lim, Shing Chee (2017) Synthetic and Natural Fibrous Scaffolds for Soft Tissue Engineering Applications. Journal of Mechanical Engineering, 4 (3). pp. 223-233. ISSN 1823- 5514

Kim, Seng Chia and Tan, Yit Peng (2017) Design and development of a shortwave near infrared spectroscopy using NIR LEDs and regression model. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3070-3075. ISSN 2088-8708

Kimpa, Mohammed Isah and Uthman Isah, Kasim and Yabagi, Jibrin Alhaji and Taufiq, Sulaiman and Agam, Mohd Arif (2017) Synthesis and characterization of natural sensitizers for dye sensitized solar cells. Traektoriâ nauki, 3 (10). pp. 2001-2006. ISSN 2413-9009

Kormin, Faridah and Khan, Muhammad and Ali, Md. Eaqub and Mohd Yunus, Rosli (2017) Effect of extraction parameter on antioxidant properties of nephrolepis Biserrata (Schott) Frond (NBF) by TCMAE method. Advanced Science Letters, 23 (5). pp. 4363-4367. ISSN 1936-6612

Kormin, Shaharuddin and Kormin, Faridah and Hossen Beg, Mohammad Dalour and Mat Piah, Mohd Bijarimi (2017) Physical and mechanical properties of LDPE incorporated with different starch sources. International Research and Innovation Summit (IRIS2017), 226 (012157). pp. 1-10.

Kormin, Shaharuddin and M. Rus, Anika Zafiah (2017) Preparation and characterization of biopolyol from liquefied oil palm fruit waste: part 2. Materials Science Forum, 882. pp. 113-118. ISSN 0255-5476

Kubota, Tetsu and Zakaria, Mohd Azuan and Abe, Seiji and Toe, Doris Hooi Chyee (2017) Thermal functions of internal courtyards in traditional Chinese shophouses in the hot-humid climate of Malaysia. Building and Environment, 112 (1). pp. 115-131. ISSN 0360-1323

Lai, C.S. and Mohamad, M. M. and Lee, M.F. and Mohd Salleh, K. and Sulaiman, N.L. and Rosli, D.I. and Chang, W.V.S. (2017) Prevalence of cyberbullying among students in Malaysian higher learning institutions. Advanced Science Letters, 23 (2). pp. 781-784. ISSN 1936-6612

Lai, Chee Sern and Kamarudin, Noormawati and Lip, Rashidah and Hasnan, Noridah (2017) Tahap penggunaan pembelajaran maya dalam kalangan guru reka bentuk teknologi: satu tinjauan di sekolah rendah luar bandar. Online Journal for TVET Practitioners, 2 (2). pp. 1-8. ISSN 2289-7410

Lai, Chee Sern and Lee, Ming Foong and Sulaiman, Nor Lisa and Mohamad, Mimi Mohaffyza and Mohd Salleh, Kahirol (2017) Involvement of mainstream teachers in inclusive education: are we ready? Pertanika Journal Social Sciences & Humanities, 25 (NIL). pp. 205-214. ISSN 0128-7702

Lai, Chee Sern and Sulaiman, Nor Lisa and Mohamad, Mimi Mohaffyza and Mohd Salleh, Kahirol (2017) Innovative invention skills and individual competency model for vocational education. International Journal of Information and Education Technology, 7 (7). pp. 514-517. ISSN 2010-3689

Lajis, M. A. and Ahmad, A. and Yusuf, N.K. and Azami, A. H. and Wagiman, A. (2017) Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. pp. 1-5. ISSN 9335137

Lashari, Saima Anwar and Ibrahim, Rosziati and Senan, Norhalina (2017) Medical data classification using similarity measure of fuzzy soft set based distance measure. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-9). pp. 95-99. ISSN 2289-8131

Lee, Kar Yee and Chuah, Chai Wen (2017) Secret channel using video steganography. International Journal on Informatics Visualization, 1 (4-2). pp. 240-245. ISSN 2549-9610

Lee, Ming Foong and Shafii, Roziemee (2017) Karektor guru pendidikan khas aliran kemahiran berlandaskan nilai retorik dari perspektif pelajar pendidikan khas masalah pendengaran di Malaysia. Advanced Journal of Technical and Vocational Education, 1 (1). pp. 434-438. ISSN 2550-2174

Lee, Sung How and Kim, Seng Chia (2017) Navigating an auto guided vehicle using rotary encoders and proportional controller. International Journal of Integrated Engineering, 9 (2). pp. 71-77. ISSN 2229-838X

Lee, T.C. and Koshy, P. and Abdullah, H.Z. and Idris, M.I. (2017) Biomimetic bone-like apatite coating on anodised titanium in simulated body fluid under UV irradiation. Materials Science Forum, 888. pp. 251-255. ISSN 1662-9752

Lee, Wei Chuan and Kasim, Shahreen and Seah, Choon Sen and Hassan, Rohayanti and Mohd. Ali, Norhayati (2017) Batu pahat car workshops finder. International Journal of Innovative Computing, 7 (2). pp. 29-33. ISSN 2180-4370

Lee, Yee Yong and Md Din, Mohd Fadhil and Ponraj, Mohanadoss and Noor, Zainura Zainon and Kenzo, Iwao and Chelliapan, Shreeshivadasan (2017) Overview of urban heat island (UHI) phenomenon towards human thermal comfort. Environmental Engineering and Management Journal, 16 (9). pp. 2097-2111. ISSN 1582-9596

Lee, Yong Siang and Mohamed Ghazali, Farid and Zainun, 3. Noor Yasmin and Ali, Roslinda (2017) General risks for tunnelling projects: an overview. AIP Conference Proceedings, 182 (1). pp. 1-8. ISSN 1551-7616

Leong, Wai Yean and Soon, Chin Fhong and Wong, Soon Chuan and Tee, Kian Sek and Cheong, Sok Ching and Gan, Siew Hua and Youseffi, Mansour (2017) In vitro growth of human keratinocytes and oral cancer cells into microtissues: an aerosol-based microencapsulation technique. Bioengineering, 4 (45). pp. 1-14. ISSN 2306-5354

Liew Abdullah, Nurul Hidayah and Shafii, Haryati and Seow, Ta Wee (2017) Sumbangan pemboleh ubah peramal terhadap pengetahuan, persepsi, sikap dan tingkah laku murid tahun 6 terhadap alam sekitar. Geografi, 5 (2). pp. 116-126. ISSN 2289-4470

Lim, Alvin John Meng Siang and Izzudini, Muhammad Arif Azraei (2017) The behaviour of remolded Batu Pahat soft clay with different OCR values under cyclic loading. MATEC Web of Conferences, 103 (07004). pp. 1-7.

Lim, Shing Chee and Khoo, Weily and Koh, Ching Theng (2017) Electrospinning of Polycaprolactone (PCL) and Gelatin Polymeric Fibers. Journal of Mechanical Engineering, 4 (3). pp. 246-254. ISSN 1823- 5514

Loh, Jian Rong and Phang, Chang (2017) A new numerical scheme for solving system of Volterra integro-differential equation. Alexandria Engineering Journal. ISSN 1110-0168

Low, Pek Jin and Esa, Fahmiruddin and You, Kok Yeow and Abbas, Zulkifly (2017) Estimation of dielectric constant for various standard materials using microstrip ring resonator. Journal of Science and Technology, 9 (3). pp. 55-59. ISSN 2229-8460

Luqman, H.M. and Baharom, M.N.R. and Ahmad, H. and Ullah, Irshad (2017) Planning and conducting magnetic field level measurement from overhead transmission line. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3124-3132. ISSN 2088-8708

M., Hadi and Wan Mohamed, Wan Azlinda (2017) Reformation of offenders in Nigerian correctional institutions. Pertanika Journal Social Sciences & Humanities, 25 (NIL). pp. 139-148. ISSN 0128-7702

M. Fazli, F.I. and Ahmad, M.K. and Soon, C.F. and N., Nafarizal and Suriani, A.B. and Mohamed, A. and Mamat, M.H. and Malek, M.F. and Shimomura, M. and Murakamid, K. (2017) Dye-sensitized solar cell using pure anatase TiO2 annealed at different temperatures. Optik - International Journal for Light And Electron Optics, 140. pp. 1063-1068. ISSN 0030-4026

M. Idris, A. A. and Arsat, R. and Ahmad, M. K. and Sidek, F. (2017) Comparison of deposition methods of ZnO thin film on flexible substrate. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 536-541. ISSN 2502-4752

M.A., Rabiatul Adawiyah and O., Saliza Azlina (2017) Interfacial reaction between SAC305 lead–free solders and ENImAg surface finish and bare copper. Materials Science & Engineering Technology, 48 (3-4). pp. 235-240. ISSN 0933-5137

Madar, Ahmad Rizal and Abd. Hamid, R. (2017) Usability evaluation successful factors (SFs) framework through entrepreneurship program at community college Malaysia: modified norminal group technique approach. Social Sciences & Humanities, 25 (NIL). pp. 139-1148. ISSN 0128-7702

Madlan, Mohd Amran and Ghazali, M. I. and Zaman, Izzuddin and Kasron, Md Zainorin and Ying, T. C. (2017) The application of coconut fiber as dissipative silencer. IOP Conference Series: Materials Science and Engineering, 165 (1). pp. 1-6. ISSN 1757-899X

Madun, Aziman and Wijeyesekera, Devapriya Chitral and Ahmad Tajuddin, Saiful Azhar and Zainalabidin, Mohd Hazreek and Yunus, Riduan and Tajul Baharudin, Mohamad Faizal (2017) Characterisation of lateral and vertical subsurface heterogeneity in the ground using sustainable seismic surface wave methodology. Journal of Physics: Conference Series, 25 (NIL). pp. 169-176. ISSN 1742-6588

Mahbib, Umi Kalthom and Esa, Ahmad and Mohamad, Nurul Haerani and Mohd Salleh, Berhan (2017) Cooperative learning (CL) as 21st century’s teaching method in improving english proficiency among primary school student: teachers’ perception. Pertanika Journal: Social Sciences & Humanities, 25 (NIL). pp. 39-54. ISSN 0128-7702

Mahdi, Ahmed Sahib and Mustapa, Mohd Sukri and Mohamad, Mahmod Abd Hakim and Tobi, Abdul L. M. and Ab Kadir, Muhammad Irfan and Samsi, Mohd Arif (2017) Dry sliding wear behavior of the reinforced by graphite particle and heat treated of recycled aluminum AA6061 based MMC fabricated by powder metallurgy method. Key Engineering Materials, 740 (NIL). pp. 9-16. ISSN 1013-9826

Mahdin, Hairulnizam and Kamaludin, Hazalila and Saedudin, RD Rohmat and Omar, Abdul Halim and Kasim, Shahreen and Jailani, Junaidah (2017) The application of RFID system in water level monitoring. International Journal on Advanced Science Engineering Information Technology, 7 (4-2). pp. 1522-1527. ISSN 2088-5334

Mahmood, Salwa and Mat Saman, Muhamad Zameri and Hemdi, Abdul Rahman and Zakuan, Norhayati (2017) Potential impacts for monitoring sustainability: case study of hollow fiber membrane. Journal of Engineering and Applied Sciences, 12 (10). pp. 2682-2686. ISSN 1816-949X

Malik, R. A and Abdullah, M and Abdullah, S and Homam, Mariyam Jamilah and Yokoyama, T and Yatini, C. Y (2017) Prediction and measurement of high frequency radio frequencies in peninsular Malaysia and comparisons with the international reference ionosphere model. Advanced Science Letters, 23 (2). pp. 1294-1298. ISSN 1936-7317

Mamat, K. A. and Yusof, M.S. and Wan Yusoff, Wan Fauziah and Rahim, M. Zulafif and Hassan, S. and A. Rahman, M. Qusyairi and Abd Karim, M. A. (2017) Dehydration of traditional dried instant noodle (mee siput) using controlled temperature & humidity dryer. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012009). pp. 1-7. ISSN 1757-899X

Manap, Norpadzlihatun and Muhamad, Nor Izzah and Sandirasegaran, Kavitha (2017) Strength and water absorption rate of concrete made from palm oil fuel ash. Materials Science Forum, 889. pp. 261-264. ISSN 1662-9752

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Abdullah, Abd Halid and Abdul Awal, A S M and Sohu, Samiullah and Ali, Nizakat (2017) Utilization of sugarcane bagasse ash in concrete as partial replacement of cement. IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-8. ISSN 1757-8981

Mangi, Sajjad Ali and Jamaluddin, Norwati and Wan Ibrahim, Mohd Haziman and Mohamad, Noridah and Sohu, Samiullah (2017) Utilization of sawdust ash as cement replacement for the concrete production: a review. Engineering Science Technology International Research Journal (ESTIRJ), 1 (3). pp. 11-15. ISSN 2521-5027

Mangi, Sajjad Ali and Sohu, Samiullah and Soomro, Faheem Ahmed and Abdullah, Abd Halid and Nagapan, Sasitharan (2017) Assessment of physicochemical parameters for the drinking water quality in the vicinity of Nawabshah City, Sindh, Pakistan. Engineering Science And Technology International Research Journal, 1 (1). pp. 10-14. ISSN 2521-5027

Manshoor, Bukhari and Mohamed Ster, Laily Azwati and Khalid, Amir and Zaman, Izzuddin (2017) An effect of straight and serpentine flow fielddesign on proton exchange membrane fuel cell. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3076-3079. ISSN 1819-6608

Marsi, Noraini and Mohd Rus, Anika Zafiah and Ibrahim, Mohd Razali and Samsuddin, Syahir Arif and Abdul Rashid, Azrin Hani (2017) The synthesis and surface properties of newly eco-resin based coconut oil for superhydrophobic coating. Solid State Phenomena, 266. pp. 59-63. ISSN 1662-9779

Maselan, Norafiz and Ali, Maselan and Sufahani, Suliadi Firdaus (2017) The expectation requirement prospective in fulfill industries needs in technical skills among vocational students (TVET). The Colloquium, 1 (NIL). pp. 1-2. ISSN 2590-3969

Masrol, Shaiful Rizal and Irwan Ibrahim, Mohd Halim and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Raub, Radhi Abdul and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of beating on the characteristics of Malaysian durian (Durio Zibethinus Murr.) rind chemi-mechanical (CMP) pulp and paper. Jurnal Teknologi, 80 (2). pp. 9-17. ISSN 2180–3722

Mat Akir, Rohaida and Abdullah, Mardina and Chellapan, Kalaivani and Hasbi, Alina Marie and Bahari, Siti Aminah (2017) Comparative study of TEC for GISTM stations in the Peninsular Malaysia region for the period of January 2011 to December 2012. Advanced Science Letters, 23 (2). pp. 1304-1309. ISSN 1936-6612

Mat Akir, Rohaida and Chellappan, Kalaivani and Abdullah, Mardina (2017) Total electron content forecasting using artificial neural network. Pertanika Journal of Social Science and Technology, 25 (S). pp. 19-28. ISSN 0128-7680

Mat Ariff, Roslina and Hanafi, Dirman and Mulyo Utomo, Wahyu and Muhammad Zin, Nooradzianie and Sim, Sy Yi and Bohari, Azuwien Aida (2017) Takagi-Sugeno fuzzy perpose as speed controller in indirect field oriented control of induction motor drive. International Journal of Power Electronics and Drive System (IJPEDS), 8 (2). pp. 513-521. ISSN 2088-8694

Mat Jusoh, Zairra and Kasim, Narimah (2017) Influential factors affecting materials management in construction projects. International Journal of Integrated Engineering, 8 (4). pp. 82-90. ISSN 2082-1344

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Designation of soap molder machine and procedure for transparent soap. "IOP Conference Series: Materials Science and Engineering Journal ", 203 (012001). pp. 1-7. ISSN 1757-899X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Solving cracking phenomenon in premium transparent toilet soap production using Stretched LLDPE Film Wrap. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012015). pp. 1-7. ISSN 1757-899X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Study on handing process and quality degradation of oil palm fresh fruit bunches (FFB). IOP Conference Series: Materials Science and Engineering (MSE), 203 (012027). pp. 1-9. ISSN 1757-899X

Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) A study on shelf life prolonging process of chili soy sauce in Malaysian SMEs’ (Small Medium Enterprise). IOP Conference Series: Materials Science and Engineering (MSE), 203 (012026). pp. 1-6. ISSN 1757-899X

Mazlan, Muhammad Hazli and Todo, Mitsugu and Yonezawa, Ikuho and Takano, Hiromitsu (2017) Biomechanical alteration of stress and strain distribution associated with vertebral fracture. Journal of Mechanical Engineering, 2 (2). pp. 123-133. ISSN 1823-5514

Md Ali, Zarina and Lai, Wai Tan and Daud, Ira Masyra and Ahmad, Noor Aliza (2017) Rainfall characteristics of Johor Bahru and Kota Bharu, Malaysia. Rainfall characteristics of Johor Bahru and Kota Bharu, Malaysia, 9 (4). pp. 77-83. ISSN 2229-8460

Md Sahak, Adibah Aishah and Mohd Reza, Sakeenah and Md Yunus, Melor (2017) The importance of intership in Kolej Yayasan Pelajaran Johor towards culinary art students. Malaysian Journal of Social Sciences and Humanities, 2 (3). pp. 61-64. ISSN 2504-8562

Md Yunos, Jailani and Lai, Chee Sern and Hamdan, Nor Hidayah (2017) Sustainability of TVET TE programme: an exploratory sequential mixed method design. Advanced Science Letters, 23 (1). pp. 220-222. ISSN 1936-7317

Md. Yassin, Azlina and Arif, Norjariah and Perumal Naidu, Jeya Lechumy (2017) Homestay industry – drivers and challenges in the State of Johor, Malaysia. International Journal of Property Science, 7 (1). pp. 1-11. ISSN 2229-8568

Mehwish, Rashid and Rosmaini, Tasmin and Muhammad, Shafiq (2017) Impact of multi factor leadership approach on employee conflict and employee performance in Malaysia. Advanced Science Letters, 23 (9). pp. 1-3. ISSN 1936-7317

Miandal, Kellie and Hoh, Hang Tak and Mohamad, Khairul Anuar and Fuei, Pien Chee and Alias, Afishah (2017) The structural and optical properties of Poly(Triarylamine) (PTAA) thin films prepared at defferent spin coating method. Journal of Computational and Theoretical Nanoscience, 23 (2). pp. 1337-1339. ISSN 1546-1955

Mior Shahidina, Shazatul Akmaliah and Fadila, Nor Akmal and Yusopa, Mohd Zamri and Tamina, Mohd Nasir and Osman, Saliza Azlina (2017) Effect of etching as pre-treatment for electroless copper plating on silicon wafer. Jurnal Teknologi (Sciences & Engineering), 79 (7). pp. 61-69. ISSN 0127-9696

Misdan, Nurasyikin and Abdullah, Norfadhilatuladha and Tajuddin, Muhamad Hanis and Yusof, Norhaniza and Jaafar, Juhana and Aziz, Farhana (2017) Removal of lead(II) from aqueous solution using polyacrylonitrile/zinc oxide activated carbon nanofibers. Malaysian Journal of Analytical Sciences, 21 (3). pp. 619-626. ISSN 1394 - 2506

Misnon, Noor Aina and Che Osmi, Siti Khadijah and Shahidan, Shahiron and Chouw, N. (2017) Influence of coir random fibre length on concrete: mechanical properties. Malaysian Construction Research Journal, 22 (2). pp. 47-58. ISSN 1985-3807

Mohamad, Mimi Mohaffyza and Yee, Mei Heong and Tee, Tze Kiong (2017) Cognitive-learning styles conceptual framework in vocational education. The Social Sciences, 12 (5). pp. 855-861. ISSN 1818-5800

Mohamad, Noridah and Goh, Wan Inn and Abdullah, Redzuan and Abdul Samad, Abdul Aziz and Mendis, Priyan and Sofi, Massoud (2017) Structural performance of FCS wall subjected to axial load. Construction and Building Materials, 134. pp. 185-198. ISSN 0950-0618

Mohamad, Noridah and Goh, Wan Inn and Samad, A.A.A. and Lockman, A. and Hadipramana, Josef (2017) Structural behaviour of beam with HDPE plastic balls subjected to flexure load. Materials Science Forum, 889 (NIL). pp. 270-274. ISSN 0255-5476

Mohamad Mohsin, Mohamad Farhan and Hamdan, Abdul Razak and Abu Bakar, Azuraliza and Abd Wahab, Mohd Helmy (2017) Validation on an enhanced dendrite cell algorithm using statistical analysis. International Journal onAdvanced Science Engineering Information Technology, 7 (2). pp. 482-488. ISSN 2088-5334

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2017) Classifications of voltage stability margin (VSM) and load power margin (LPM) using probabilistic neural network (PNN). ARPN Journal of Engineering and Applied Sciences, 12 (19). pp. 5591-5596. ISSN 1819-6608

Mohamad Nor, Ahmad Fateh and Sulaiman, Marizan and Abdul Kadir, Aida Fazliana and Omar, Rosli (2017) Voltage stability analysis of load buses in electric power system using adaptive neuro-fuzzy inference system (anfis) and probabilistic neural network (pnn). ARPN Journal of Engineering and Applied Sciences, 12 (5). pp. 1406-1412. ISSN 1819-6608

Mohamad Sari, N. and Esa, Ahmad (2017) Factors affecting students participation in extra-curricular. Elixir Psychology, 107. pp. 46960-46962. ISSN 2229-712X

Mohamed, R. M. and Al-Gheethi, A. A. and Aznin, S. S. and Hasila, A. H. and Wurochekke, A. A. and Kassim, A. H. (2017) Removal of nutrients and organic pollutants from household greywater by phycoremediation for safe disposal. International Journal Of Energy And Environmental Engineering, 9. p. 259. ISSN 2251-6832

Mohamed Ali, Nor Salihah and Ibrahim, Farah Nur Diyana and Morsin, Marlia and Mat Salleh, Muhammad and Jumadi, Nur Anida and Morsin, Marriatyi (2017) Structural and optical properties of gold nanosphericals in variation of growth time using seed mediated growth method. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-8). pp. 67-71. ISSN 2180-1843

Mohammada, Mohammad Tahir Sabit and Suratman, Robiah (2017) Complexity of intestate estates distribution and escheat law. International Journal of Law, Government and Communication, 2 (4). pp. 1-12. ISSN 0128-1763

Mohammadhosseini, Hossein and Abdul Awal, A.S.M. and Mohd Yatim, Jamaludin (2017) The impact resistance and mechanical properties of concrete reinforced with waste polypropylene carpet fibres. Construction and Building Materials, 143 (NIL). pp. 147-157. ISSN 0950-0618

Mohammadhosseini, Hossein and Mohamad Yatim, Jamaludin and Mohd Sam, Abdul Rahman and Abdul Awal, A.S.M. (2017) Durability performance of green concrete composites containing waste carpet fibers and palm oil fuel ash. Journal of Cleaner Production, 144 (NIL). pp. 448-458. ISSN 0959-6526

Mohammed, Akmal Nizam and Razali, Mohd Azahari and Sapit, Azwan and Hushim, Mohd Faisal and Osman, Shahrul Azmir and A. Rahman, Mohamad Farid (2017) Numerical study of variable length exhaust pipe in small engine. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2374-2379. ISSN 1819-6608

Mohammed, Mazin Abed and Abd Ghani, Mohd Khanapi and Hamed, Raed Ibraheem and A. Mostafa, Salama and Ahmed Ibrahim, Dheyaa and Jameel, Humam Khaled and Alallah, Ahmed Hamed (2017) Solving vehicle routing problem by using improved K-nearest neighbor algorithm for best solution. Journal of Computational Science, 21 (NIL). pp. 232-240. ISSN 1877-7503

Mohd, E. and Dahlan, S. H. (2017) Miniaturization of resonator based on Moore fractal. TELKOMNIKA, 15 (3). pp. 1433-1439. ISSN 1693-6930

Mohd, Suzila and Brahim, Juliana and Ahmad Latiffi, Aryani and Fathi, Mohamad Syazli and Harun, Aizul Nahar (2017) Developing building information modelling (BIM) implementation model for project design team. Malaysian Construction Research Journal, 1 (1). pp. 71-83. ISSN 1985-3807

Mohd Akhair, Siti Hajar and Harun, Zawati and Jamalludin, Mohd Riduan and Shuhor, Muhammad Fikri and Kamarudin, Noor Hasliza and Yunos, Muhamad Zaini and Ahmad, Azlinnorazia and Azhar, Mohd Faiz Hafeez (2017) Effect of graphene oxide with controlled stirring time. Chemical Engineering Transactions, 56. pp. 709-714. ISSN 2283-9216

Mohd Akhair, Siti Hajar and Harun, Zawati and Jamalludin, Mohd Riduan and Shuhor, Muhammad Fikri and Kamarudin, Noor Hasliza and Yunos, Muhamad Zaini and Ahmad, Azlinnorazia and Azhar, Mohd Faiz Hafeez (2017) Polymer mixed matrix membrane with graphene oxide for humic acid performances. Chemical Engineering Transactions, 56. pp. 697-702. ISSN 2283-9216

Mohd Ali, A.Z. and Sanjayan, Jay and Guerrieri, Maurice (2017) Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Construction and Building Materials, 137. pp. 195-207. ISSN 0950-0618

Mohd Ali, Ahmad Zurisman and Sanjayan, Jay and Guerrieri, Maurice (2017) Performance of geopolymer high strength concrete wall panels and cylinders when exposed to a hydrocarbon fire. Construction and Building Materials, 137 (NIL). pp. 195-207. ISSN 0950-0618

Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Ahmad Latiffi, Nur Atikah and Mohd Rozlan, Nur Farahanim and Abduh Algheethi, Adel Ali Saeed (2017) Protein and lipid content of microalgae scenedesmus sp. biomass grown in wet market wastewater. MATEC Web of Conferences, 103 (NIL). pp. 1-6. ISSN 2261-236X

Mohd Asrah, Norhaidah and Mohd Salleh, Rohayu and Zulkifli, Noor Amiza (2017) Network topology of people NEWS. Journal of Science and Technology, 9 (3). pp. 1-5. ISSN 2229-8460

Mohd Faiz, Nur Sofurah and Awang, Halizah and Mohamed, Maziana (2017) Narrowing communication gaps in teaching international students. Pertanika Journal: Social Sciences & Humanities, 25 (NIL). pp. 215-222. ISSN 0128-7702

Mohd Hasri, Nurul Nadzirah and Nies, Hui Wen and Chan, Weng Howe and Mohamad, Mohd Saberi and Deris, Safaai and Kasim, Shahreen (2017) Improved support vector machine using multiple SVM-RFE for cancer classification. International Journal on Advanced Science Engineering Information Technology, 7 (4-2). pp. 1589-1594. ISSN 2088-5334

Mohd Jamail, Nor Akmal and Ishak, M. H. and Muhamad, N.A. (2017) Insulation characteristic analysis of coconut oil and palm oil as liquid insulating material. International Journal Of Simulation -- Systems, Science & Technology, 1. 49.1-49.6. ISSN 1473-8031 (Submitted)

Mohd Khalid, Muhamad Azrin and Ismail, Azzura (2017) Mitigation of corrosion attack on carbon steel coated cermet alloy in different anion contents. AIP Conference Proceedings, 1901. pp. 120003-1. ISSN 978-0-7354-1589-8

Mohd Nawi, Mohd Nasrun and Deraman, Rafikullah and Bamgbade, Jibril Adewale and Zulhumadi, Faisal and Mehdi Riazi, Salman Riazi (2017) E-Procurement in Malaysian construction industry: benefits and challenges in implementation. International Journal of Supply Chain Management, 6 (1). pp. 209-213. ISSN 2051-3771

Mohd Nawi, Nazri and Abdul Hamid, Noorhamreeza and Samsudin, Noor Azah and Harun, Zawati and Ab Aziz, Mohd Firdaus and Ramli, Azizul Azhar (2017) Cause and effect prediction in manufacturing process using an improved neural networks. International Journal on Advanced Science Engineering Information Technology, 7 (6). pp. 2027-2034. ISSN 2088-5334

Mohd Noor, S.N.F. and Md Tab, F. and Kamarulzaman, R. (2017) Exploring job interview skills of future engineers: application of appraisal analysis assessment and verbal impression management. Journal of Technical Education and Training (JTET), 9 (1). pp. 87-99. ISSN 2229-8932

Mohd Rabani, Nur Amira and Kamdi, Zakiah (2017) Two-body dry abrasive wear performance of high velocity oxygen fuel spray process and electrodeposited cermet coatings. Materials Science Forum, 888 (NIL). pp. 131-135. ISSN 1662-9752

Mohd Salleh, Kahirol and Sulaiman, Nor Lisa and Mohamad, Mimi Mohaffyza and Lai, Chee Sern (2017) Assessing soft skills components in science and technology programs within Malaysian Technical Universities. Songklanakarin Journal of Science and Technology, 39 (3). pp. 399-405. ISSN 0125-3395

Mohd Salleh, Sufiah and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Ishak, I. A. and Shirakashi, Masataka and Muhammad, Sallehuddin (2017) Aerodynamics characteristics around simplified high speed train model under the effect of crosswinds. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2604-2609. ISSN 1819-6608

Mohd Sari, Kamarul Aini and Mohammed Sani, Rahim (2017) Applications of foamed lightweight concrete. MATEC Web of Conferences, 97 (NIL). pp. 1-5. ISSN 2261-236X

Mohd Tobi, A. L. and Kamdi, Z. and Ismail, M. I. and Nagentrau, M. and Roslan, L. N. H. and Mohamad, Z. and Omar, A. S. and Abdul Latif, N. (2017) Abrasive wear failure analysis of tungsten carbide hard facing on carbon steel blade. IOP Conf. Series : Materials Science and Engineering, 165 (012020). pp. 1-9. ISSN 1757-899X

Mohd Tobi, A.L. and Sun, W. and Shipway, P.H. (2017) Evolution of plasticity-based wear damage in gross sliding fretting of a Ti-6Al-4V non-conforming contact. Tribology International, 113. pp. 474-486. ISSN 0301-679X

Mohd Tobi, A.L. and Sun, W. and Shipway, P.H. (2017) Investigation on the plasticity accumulation of Ti-6Al-4V fretting wear by decoupling the effects of wear and surface profile in finite element modelling. Tribology International, 113. pp. 448-459. ISSN 0301-679X

Mohd Yazed, Muhammad Syukri and Mahmud, Farhanahani and Morsin, Marlia (2017) Fuzzy logic system for BBT based fertility prediction. Journal of Fundamental and Applied Sciences, 9 (4). pp. 475-491. ISSN 1112-9867

Mohd Yazid, Nazatulsyima and Tay, Kim Gaik and Md Sudin, Azila and Choy, Yaan Yee (2017) Solving dissipative nonlinear schrodinger equation with variable coefficient using homotopy perturbation method. Journal of Engineering and Applied Sciences, 12 (19). pp. 4814-4819. ISSN 1816-949X

Mohd Yunus, Mohd Amin and Gopala Krishnan, Sonniaa K.V. and Mohd Nawi, Nazri and Mat Surin, Ely Salwana (2017) Study on database management system security issues. International Journal on Informatics Visualization, 1 (4-3). pp. 192-194. ISSN 2549-9610

Mohd. Muji, Siti Zarina and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Chua, King Lee and Amirulah, Rahman and Ambar, Radzi (2017) Optical tomography verification for single and mixed modalities. Sensors and Actuators A: Physical, 253 (NIL). pp. 10-26. ISSN 0924-4247

Morsin, Marlia and Mat Salleh, Muhamad and Sahdan, Mohd Zainizan and Mahmud, Farhanahani (2017) Effect of seeding time on the formation of gold nanoplates. International Journal of Integrated Engineering, 9 (2). pp. 27-30. ISSN 2229-838X

Morsin, Marlia and Mat Salleh, Muhamad and Umar, Akrajas Ali and Sahdan, Mohd Zainizan (2017) Gold nanoplates for a localized surface plasmon resonance-based boric acid sensor. Sensors, 17 (947). pp. 1-9. ISSN 1424-8220

Morsin, Marriatyi and Isaak, Suhaila and Morsin, Marlia and Yusof, Yusmeeraz (2017) Characterization of defect induced multilayer graphene. International Journal of Electrical and Computer Engineering (IJECE), 7 (3). pp. 1452-1458. ISSN 2088-8708

Muhaimin, A. M. D. and N. R., Aifat and M. A. B., Abdul-Latiff and B. M., Md. Zain and S., Yaakop (2017) Interaction between the long-tailed macaque and the dung beetle in Langkawi. Pertanika Journal of Tropical Agricultural Science, 40 (4). pp. 543-552. ISSN 1511-3701

Muhamad Jamil, Siti Afiqah and Abdullah, M. Asrul Affendi and Kek, Sie Long and Nor, Maria Elena and Mohamed, Maryati and Ismail, Norradihah (2017) Analysing count data of Butterflies communities in Jasin, Melaka: a poisson regression analysis. Journal of Physics: Conference Series, 890 (012171). pp. 1-7. ISSN 1742-6588

Muhamad Jamil, Siti Afiqah and Abdullah, M. Asrul Affendi and Kek, Sie Long and Nor, Maria Elena and Mohamed, Maryati and Ismail, Norradihah (2017) Detecting overdispersion in count data: a zero-inflated poisson regression analysis. Journal of Physics: Conference Series, 890 (012170). pp. 1-8. ISSN 1742-6588

Muhamad Jamil, Siti Afiqah and Abdullah, M. Asrul Affendi and Kek, Sie Long and Olaniran, Oyebayo Ridwan and Amran, Syahila Enera (2017) Simulation of parametric model towards the fixed covariate of right censored lung cancer data. Journal of Physics: Conference Series, 890 (012172). pp. 1-8. ISSN 1742-6588

Muhammad, Shafiq and Tasmin, Rosmaini and Mehwish, Rashid (2017) Mediating role of innovation strategy between porter's red ocean strategy and innovative performance. Journal of Computational and Theoretical Nanoscience, 23 (9). pp. 9243-9246. ISSN 1546-1955

Muhammad Akram, Muhammad Akram and Kavikumar, Jacob and Iqbal, Zaffar (2017) Characterization of G -Semigroup by Intuitionistic N-Fuzzy Set (INFS) and its level set. Applied Mathematics & Information Sciences, 11 (1). pp. 95-104.

Muhammad Akram, Muhammad Akram and Kavikumar, Jacob and Iqbal, Zaffar (2017) Characterization of G -Semigroup by Intuitionistic N-Fuzzy Set (INFS) and its level set. Applied Mathematics & Information Sciences, 11 (1). pp. 95-104.

Musa, Rusnifaezah and Hashim, Norashidah and Rashid, Umi Kartini and Naseruddin, Juzaimi (2017) Accelerating startups: the role of government assistance programs and entrepreneurial orientation. International Journal of Economic Research, 14 (15). p. 131. ISSN 0972-9380

Musa, S. and Abu Mansor, N.A. A. and Bujang, S. S. and Mohd Kamil, N. A. F. and Adnan, M. S. and Hamdan, R. (2017) Potential study of water extraction from selected plants. MATEC Web of Conferences, 103 (04023). pp. 1-7. ISSN 2261-236X

Mushtaq, Muhammad Faheem and Jamel, Sapiee and Mohamad, Kamaruddin Malik and Ahmad Khalid, Shamsul Kamal and Mat Deris, Mustafa (2017) Key generation technique based on triangular coordinate extraction for hybrid cubes. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-4). pp. 195-200. ISSN 2289-8131

Mustafa, Siti Aisyah and Ramlee, Roslily and Kassim, Salina (2017) Economic forces and Islamic stock market: empirical evidence from Malaysia. Asian Journal of Business and Accounting, 10 (1). pp. 45-85. ISSN 2180-3137

Mustaffa, Nurhazirah and Ahmad, Noor Aliza and Mohammad Razi, Mohd Adib (2017) Evaluation on flow discharge of grassed swale in lowland area. MATEC Web of Conferences, 103 (4017). pp. 1-8. ISSN 2261-236X

Nagentrau, M. and Mohd Tobi, A. L. and Kamdi, Z. and Ismail, M. I. and Sambu, M. (2017) A study on wear failure analysis of tungsten carbide hardfacing on carbon steel blade in a digester tank. Journal of Failure Analysis and Prevention, 17. pp. 861-870. ISSN 1547-7029

Nagentrau, M. and Mohd Tobi, A.L. and Kamdi, Z. and Ismail, M. I. and Sambu, M. (2017) Microstructure analysis of tungsten carbide hardfacing on carbon steel blade. IOP Conf. Series : Materials Science and Engineering, 165 (012020). pp. 1-9. ISSN 1757-899X

Najeeb, Mushtaq and Mansor, Muhamad and Razali, Ramdan and Daniyal, Hamdan and A. F. Yahaya, Jabbar (2017) Experimental implementation controlled SPWM inverter based harmony search algorithm. International Journal of Renewable Energy Research (IJRER), 7 (3). pp. 1041-1052. ISSN 1309-0127

Nanihar, Nadiarulah and Khalid, Amir and Mustaffa, Norrizal and Jaat, Norrizam and Sapit, Azwan and Razali, Azahari and Mohamed Sunar, Norshuhaila (2017) Experiment on the effects of storage duration of biodiesel produced from crude palm oil, waste cooking oil and Jatropha. Journal of Physics: Conference Series, 914 (1). pp. 1-8. ISSN 1742-6588

Nasir, S. H. and Troynikov, O. and Massy-Westropp, N. (2017) Arthritis patients’ experience and perception of therapeutic gloves. International Journal of Fashion Design, Technology and Education, 11 (2). pp. 233-242. ISSN 1754-3266

Nasir, Siti Hana and Troynikov, Olga (2017) Influence of hand movement on skin deformation: a therapeutic glove design perspective. Applied Ergonomics, 60. pp. 154-162. ISSN 0003-6870

Nathan, Shelena Soosay and Berahim, Mazniha and Ramle, Rosni (2017) Rubric for measuring psychomotor and affective learning domain. Social Sciences & Humanities, 25 (NIL). pp. 101-108. ISSN 0128-7702

Ngadiman, Norhayati and Abdul Rahman, Ismail and Kaamin, Masiri and Amiruddin, Mohd Hasril and Leman, Abdul Mutalib and Mokhtar, Mazlin (2017) Governance strategies in sustainable campus using Rasch model. Advanced Science Letters, 23 (4). pp. 3233-3236. ISSN 1936-6612

Nizam, Yoosuf and Mohd, Mohd Norzali and Abdul Jamil, M. Mahadi (2017) Biomechanical application: exploitation of kinect sensor. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3183-3188. ISSN 1819-6608

Noman, Efaq Ali and Al-Gheethi, Adel and Talip, Balkis and Ab. Rahman, Nik and Nagao, Hideyuki and Radin Mohamed, Radin Maya Saphira and Ab. Kadir, Omar (2017) Identification of fungi isolated from clinical wastes. Journal of Science and Technology, 9 (4). pp. 64-69. ISSN 2229-8460

Nor, Maria Elena and Rusiman, Mohd Saifullah and Sufahani, Suliadi Firdaus and Abdullah, Mohd Asrul Affendi and Bataraja, Sathwinee (2017) Deseasonalisation in electricity load forecasting. International Journal of Engineering & Technology, 5. pp. 1-4. ISSN 2227-524X

Nor Rashid, Fadilla ‘Atyka and Suriani, Nor Surayahani (2017) Kinect-based physiotherapy and assessment: a comprehensive review. Indonesian Journal of Electrical Engineering and Computer Science, 5 (3). pp. 401-408. ISSN 2502-4752

Norazam, Putri Nur Farah Izzati and Bakar, Ismail and Lim, Alvin John Meng Siang and Herman, Herman Shah (2017) Stabilization of peat soil by using envirotac. MATEC Web of Conferences, 103 (07014). pp. 1-7.

Nordin, Normayati and Abdul Karim, Zainal Ambri and Othman, Safiah and Raghavan, Vijay R. and Batcha, Mohd Faizal Mohideen and Hariri, Azian and Basharie, Siti Mariam (2017) Flow characteristics of 3-D turning diffuser using particle image velocimetry. AIP Conference Proceedings, 1831 (NIL). pp. 1-9. ISSN 0094-243X

Nuar, Ahmad Najmi Amer Haider and Mahdin, Hairulnizam and Abdullah, Noryusliza and Darman, Rozanawati and Ahmad, Masitah (2017) A social networking-based advertising to enhance customer reach target. International Journal on Advanced Science Engineering Information Technology, 7 (4-2). pp. 1516-1521. ISSN 2088-5334

Nuhu, Awwal Hussain and Jikan, Suzi Salwah and Asman, Saliza and Badarulzaman, Nur Azam and Muhammad Zago, Dagaci and Bano, Nazia (2017) Fabrication and characterization of direct recycled Al-Cu-Cullet Metal composite. Journal of Science and Technology, 9 (4). pp. 15-18. ISSN 2229-8460

O. Mumin, Abdulrashid and Abdulhasan, Raed Abdulkareem and Alias, Rozlan and A. Awaleh, Abdisamad and Abdullah, Jiwa and Dahlan, Samsul Haimi (2017) A survey on recent approaches of electromagnetic absorption reduction with respect to human head exposure to GSM frequency bands. Science International (Lahore), 29 (1). pp. 13-17. ISSN 1013-5316

Olajidei, Sunday Emmanuel and Mohd Diah, Mohd Lizam and Akinbola, Kazeem Bolayemi (2017) Assessment of the burdens of residential neighbourhood crime. European Journal of Social Sciences Studies, 2 (5). pp. 1-12. ISSN 2501-8590

Ong, Pauline and Zainuddin, Zarita and Kee, Huong Lai (2017) A novel selection of optimal statistical features in the DWPT domain for discrimination of ictal and seizure‑free electroencephalography signals. Pattern Anal Application. pp. 1-13.

Othman, Siti Amira and Radiman, Shahidan (2017) Role of horseradish peroxidase in polypyrrole conductivity. Solid State Phenomena, 268 (NIL). pp. 370-373. ISSN 1662-9779

Oussama, L. and A. Jamil, M. M. and W. M., Hafizah and Ambar, R. (2017) Red blood cell image enhancement techniques for cells with overlapping condition. Journal of Fundamental and Applied Sciences, 9 (4S). pp. 614-628. ISSN 1112-9867

Palaniappan, Shamala and Mustapha, Aida and Mohd Foozy, Cik Feresa and Atan, Rodziah (2017) Customer profiling using classification approach for bank telemarketing. International Journal On Informatics Visualization, 1 (4-2). pp. 214-217. ISSN 2549-9610

Pathan, Erum and Zulkifli, Shamsul Aizam (2017) Passive damping techniques with LCL filter in inverter-grid connected. Pertanika Journal of Science & Technology, 25 (S). 45 -52. ISSN 0128-7680

Pusppanathan, Jaysuman and Abdul Rahim, Ruzairi and Phang, Fatin Aliah and Mohamad, Elmy Johana and Nor Ayob, Nor Muzakkir and Rahiman, Mohd Hafiz Fazalul and Chan, Kok Seong (2017) Single-plane dual-modality tomography for multiphase flow imaging by integrating electrical capacitance and ultrasonic sensors. IEEE Sensors Journal, 17 (19). pp. 6368-6377. ISSN 1558-1748

Puteh, S. and Maisarah, M. and Rosnawati, B. (2017) Employability skills mastery of special needs students at polytechnics. Pertanika Journal of Social Sciences & Humanities, 25 (S). pp. 41-46. ISSN 0128-7702

Radin Mohamed, Radin Maya Saphira and Abduh Algheethi, Adel Ali Saeed and Abdul Rahman, Junita and Mohd Kassim, Amir Hashim and Musa, Sabariah (2017) Reuse of ablution water to improve peat soil characteristics for ornamental landscape plants cultivation. MATEC Web of Conferences, 103 (NIL). pp. 1-7. ISSN 2261-236X

Radin Mohamed, Radin Maya Saphira and Abduh Algheethi, Adel Ali Saeed and M.A., Yaakob (2017) Recycling of solid wastes at kindergartens centres running title; recycling of solid wastes. Songklanakarin Journal of Science and Technology, 39 (1). pp. 69-75. ISSN 2408-1779

Rahim, Mohd Bekri and Ruhizan, M. Y. and Masran, Saiful Hadi and Nur Yunus, Faizal Amin and Abd Baser, Jamil (2017) E-portfolio MSC indicator for a virtual learning environment. Social Sciences & Humanities. pp. 191-200. ISSN 0128-7702

Rahmat, Siti Nazahiyah and Jayasuriya, Niranjali and Bhuiyan, Muhammed (2017) Identification of homogeneous areas for drought frequency analysis. International Journal of Integrated Engineering, 9 (2). pp. 18-26. ISSN 2229-838X

Rakiman, Umol Syamsyul and Raja Mohd Rasi, Raja Zuraidah and Ahmad Latiffic, Aryani (2017) Aluminium recycling activity on construction site: Malaysia case study. Advanced Science Letters, 23 (9). pp. 9347-9350. ISSN 1936-7317

Raman, Siti Nurfaizzah and Sufahani, Suliadi and Ismail, Zuhaimy (2017) A comparative study of forecasting container throughput through time series analysis. International Journal of Information Research and Review, 4 (10). pp. 1-4. ISSN 2349-9141

Ramin, Ahmad Kaseri and Mohd Diah, Mohd Lizam and Mohd Zabri, Shafee and Ahmad, Mohd Fauzi (2017) Firm's size and solvency performance: evidence from the Malaysian public listed firms. Journal of Engineering and Applied Sciences, 12 (5). pp. 1240-1244. ISSN 1816-949X

Ramli, M. Z. and Hanipah, Mohd Hafizal and Lee, L. G. and Loo, K. F. and Wong, J. K. and Zawawi, M. H. and Fuad, N. (2017) Level of Service for Pedestrian Movement towards the Performance of Passenger Information in Public Transport Stations in Klang Valley. AIP CONFERENCE PROCEEDINGS. pp. 1-7. ISSN 0094-243X

Rashid, Mehwish and Tasmin, Rosmaini and Qureshi, Muhammad Imran and Shafiq, Muhammad (2017) Relationship of servant leadership with employee in-role and extra-role performance in GLC’s of Malaysia. City University Research Journal, 1 (NIL). pp. 88-95. ISSN 2409-0441

Ridzuan, Mohd Baharudin and Daud, Zuikarnain and Ahmad, Z. (2017) A study of COD and ammonia removal by adsorbent (activated carbon, zeolite and clay) from landfill leachate. International Journal of Integrated Engineering, 9 (1). pp. 50-53. ISSN 2229-838X

Ridzuan Aw, Suzanna and Abdul Rahim, Ruzairi and Mohd Yunus, Yusri and Rahiman, Mohd Hafiz Fazalul and Wahab, Yasmin and Mohd Yunus, Fazlul Rahman and Mohamed, Elmy Johana and Abdul Aziz, Azian and Chiew, Loon Goh and Pusppanathan, Jayasuman and Green, R. G. and Zhen, Cong Tee (2017) Image reconstruction of metal pipe in electrical resistance tomography. Sensors & Transducers, 209 (2). pp. 12-19. ISSN 2306-8515

Roddin, Rohayu and Yusof, Yusmarwati and Awang, Halizah and Warman, Sarebah (2017) Nilai transformasi komuniti mah meri dalam pelancongan peribumi. Journal of Global Business and Social Entrepreneurship (GBSE), 3 (6). pp. 47-57. ISSN 2462-1714

Roddin, Rohayu and Yusof, Yusmarwati and Mohamed Yusof, Anizam and Ibrahim Mukhtar, Marina and Muhamad Hanafi, Nurfirdawati (2017) Kemahiran keusahawanan orang asli suku kaum orang kuala di Rengit Johor dalam perniagaan barangan terpakai. Journal of Global Business and Social Entrepreneurship (GBSE), 3 (6). pp. 92-100. ISSN 2462-1714

Rohiat, Mohd Akmal and Abdul Razzaq, Abdul Rasid and Hamzah, Amran and Mustafa, Mohamad Zaid and Hassan, Azman (2017) Tanjung Batu, Bebar the potential of Tanjung Batu, Pekan Pahang as an ecotourism destination. Advances in Social Science, Education and Humanities Research, 102. pp. 62-67. ISSN 2352-5398

Roslan, Muhammad Sufi and Chaudary, K. T. and Haider, Z. and Aziz, M. S. and Ali, J. (2017) Multi-walled carbon nanotubes grow under low pressure hydrogen, air, and argon ambient by arc discharge plasma. Fullerenes, Nanotubes and Carbon Nanostructures, 25 (4). pp. 269-272. ISSN 1536-383X

Roslee, Faiza and Mohd Kamil, Nor Amani Filzah and Abd Kadir, Aeslina (2017) Potential of ground and unground palm oil fuel ash in construction material. International Journal of Integrated Engineering, 3 (1). pp. 1-4. ISSN 2229-838X

Rosli, Mohd Arif and Daud, Zawawi and Abdul Latiff, Ab Aziz and A Rahman, Shahril Effendi and Oyekanmi, Adeleke Abdulrahman and Zainorabidin, Adnan and Awang, Halizah and Abdul Halim, Azhar (2017) The effectiveness of peat-AC composite adsorbent in removing color and Fe from landfill leachate. International Journal of Integrated Engineering, 9 (3). pp. 35-38. ISSN 2229-838X

Rosman, Mohammad Zawawi and Chan, Chee Ming (2017) Settlement reduction of dredged marine soils (DMS) admixed with cement & waste granular materials (WGM): 1-D compressibility study. International Journal of GEOMATE, 13 (38). pp. 104-110. ISSN 2186-2990

Rozali, Mohd Zulfadli and Puteh, Saifullizam (2017) Active involvement of students in co-curriculum (sports) versus generic skills. Science International, 29 (2). pp. 459-464. ISSN 1013-5316

Rubani, Siti Nur Kamariah and Ariffin, Arihasnida and Subramaniam, Tamil Selvan and Hamzah, Norhasyimah (2017) Students’ perception using inquiry based learning in science experiment. Journal of Science and Technology, 9 (2). pp. 17-21. ISSN 2600-7924

Rusiman, Mohd Saifullah and Mohamad, Mahathir and Che Him, Norziha and Kamardan, Muhammad Ghazali and Othaman, Saifulnizam and Shamshuddin, Muhammad Hakim and Samah, Mansor and Aziz, Norazli (2017) The use of concrete material in teaching and learning Mathematics. Journal of Engineering and Applied Sciences, 12 (8). pp. 2170-2174. ISSN 1816-949X

Rusiman, Mohd Saifullah and Sufahani, Suliadi Firdaus and Roslan, Rozaini and Khalid, Kamil and Nor, Maria Elena and Ku, Gee Huei and Lim, Soo Peng and Nun, Shwu Mean and Soh, Cher Wei (2017) Improving skills in rounding off the whole number. Journal of Engineering and Applied Sciences, 12 (3). pp. 6468-6472. ISSN 1816-949X

S.M Johan, Siti Farhanah and Chan, Chee Ming (2017) Oedometric study of dredged marine soils admixed with sand for settlement reduction. International Journal of GEOMATE, 13 (38). pp. 59-62. ISSN 2186-2990

Sadia, Aysha and Mohd Salleh, Berhannudin and Abdul Kadir, Zulida and Sanif, Sazuliana (2017) Communication satisfaction among academic staff in Malaysian public universities. International Review of Management and Marketing, 7 (3). pp. 171-178. ISSN 2146-4405

Sadun, Amirul Syafiq and Jalani, Jamaludin and Abdul Sukor, Jumadi (2017) Modbus RTU protocol and arduino IO package: a real time implementation of a 3 finger adaptive robot gripper. MATEC Web of Conferences, 108 (05004). pp. 1-5.

Salh, A. and Audah, L. and M. Shah, N. S. and Hamzah, S. A. (2017) Analyze of pilot reuse with achievable sum rate for massive MIMO cellular uplink. ARPN Journal of Engineering and Applied Sciences, 12 (2). pp. 570-578. ISSN 1819-6608

Salh, Adeeb and Audah, Lukman and M. Shah, Nor Shahida and A. Hamzah, Shipun (2017) Adaptive antenna selection and power allocation in downlink massive MIMO systems. International Journal of Electrical and Computer Engineering (IJECE). pp. 31-39. ISSN 2088-8708

Salh, Adeeb and Audah, Lukman and M. Shah, Nor Shahida and A. Hamzah, Shipun (2017) Maximizing energy efficiency for consumption circuit power in downlink massive MIMO wireless networks. International Journal of Electrical and Computer Engineering (IJECE). pp. 31-39. ISSN 2088-8708

Salihu, Ibrahim Anka and Ibrahim, Rosziati and Mustapha, Aida (2017) A hybrid approach for reverse engineering GUI model from android apps for automated testing. Journal of Telecommunication, Electronic and Computer Engineering, 9 (3-3). pp. 1-5. ISSN 2180-1843

Salim, Salman and Mat Nor, Ahmad Hakimi and Sanik, Mohd Erwan and Osman, Mohammad Hairi and Abdullah, Mohd Sufyan and Sarif, Abd Sukor and Kumil, Jenylex (2017) Bolts connection technique of bamboo in construction work. IOSR Journal of Mechanical and Civil Engineering (IOSR-JMCE), 14 (4). pp. 54-60. ISSN 2320-334X

Saliman, MAR and A, Zaidon and Bakar, ES and Lee, SH and M Tahir, P and Leemon, NF and MF, Kaipin and AH, Juliana (2017) Response surface methodology model of hydrothermal treatment parameters on decay resistance of oil palm wood. Journal of Tropical Forest Science, 29 (3). pp. 315-324. ISSN 0128-1283

Saliman, Muhammad Anuar Ridzuan and Ashaari, Zaidon and Bakar, Edi Suhaimi and Lee, Seng Hua and Md Tahir, Paridah and Abdul Halip, Juliana and Leemon, Nabil Fikri (2017) Hydrothermal treatment of oil palm wood: effect of treatment variables on dimensional stability using response surface methodology. JOURNAL OF OIL PALM RESEARCH, 29 (1). pp. 130-135. ISSN 1511-2780

Samiran, N. A. and Ng, Jo-Han and Mohd Jaafar, Mohammad Nazri and Valera-Medinad, Agustin and Tung, Chong Cheng (2017) Swirl stability and emission characteristics of CO-enriched syngas/air flame in a premixed swirl burner. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 112. pp. 315-326. ISSN 0957-5820

Sanik, M. E. and Rahimi, N. F. L. and Hamid, N. B. and M. Nor, A. H. and Prasetijo, J. and Razali, N. F. (2017) Critical gap analysis of merging sections at Kuala Lumpur middle ring road. Journal of Engineering and Technology, 8 (1). pp. 58-68. ISSN 2180-3811

Sanusi, Shuaibu Babaji and Abu Bakar, Mohd Fadzelly and Mohamed, Maryati and Sabran, Siti Fatimah and Mainasara, Muhammad Murtala (2017) Ethnobotanical, phytochemical, and pharmacological properties of nepenthes species: a review. Asian Journal of Pharmaceutical and Clinical Research, 10 (11). pp. 16-19. ISSN 0974-2441

Sanusi, Shuaibu Babaji and Abu Bakar, Mohd Fadzelly and Mohamed, Maryati and Sabran, Siti Fatimah and Mainasara, Muhammad Murtala (2017) Southeast asian medicinal plants as a potential source of antituberculosis agent. Evidence-Based Complementary and Alternative Medicine, 2017 (718564). pp. 1-39.

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Jaat, Norrizam and Mohammad, Akmal Nizam and Khalid, Amir (2017) Comparision on dynamic behavior of diesel spray and rapeseed oil spray in diesel engine. Journal of Physics: Conference Series, 822 (1). pp. 1-7. ISSN 1742-6588

Seng, Hua Lee and Ashaari, Zaidon and Aik, Fei Ang and Abdul Halip, Juliana (2017) Dimensional stability of heat oil-cured particleboard made with oil palm trunk and rubberwood. European Journal of Wood and Wood Products, 75. pp. 285-288. ISSN 0018-3768

Seng, Hua Lee and Ashaari, Zaidon and Wei, Chen Lum and Aik, Fei Ang and Abdul Halip, Juliana and Halis, Rasmina (2017) Chemical, physico-mechanical properties and biological durability of rubberwood particleboards after post heat-treatment in palm oil. Holzforschung, 72 (2). pp. 159-167. ISSN 0018-3830

Seswoya, Roslinda and Abdul Karim, Ahmad Tarmizi (2017) Sample biochemical methane potential from the digestion of domestic mixed sewage sludge in batch tests. International Journal on Advanced Science Engineering Information Technology, 7 (2). pp. 431-437. ISSN 2088-5334

Shahzad, Asim and Mohd Nawi, Nazri and Abd Hamid, Norhamreeza and Khan, Sundas Naqeeb and Aamir, Muhammad and Ullah, Arif and Abdullah, Salfarina (2017) The impact of search engine optimization on the visibility of research paper and citations. International Journal on Informatics Visualization, 1 (4-2). pp. 195-198. ISSN 2549-9610

Shamsuddin, Mohd Khairul Nizar and Mohd Kusin, Faradiella and Sulaiman, Wan Nor Azmin and Ramli, Mohammad Firuz and Tajul Baharuddin, Mohamad Faizal and Adnan, Mohd Shalahuddin (2017) Forecasting of groundwater level using artificial neural network by incorporating river recharge and river bank infiltration. MATEC Web Conference, 103. pp. 1-11. ISSN 2261-236X

Shamsudin, Zarina and Zainal, Rozlin and Seow, Ta Wee and Mat Radzuan, Indera Syahrul and Sulaiman, Noralfishah and Mohd Diah, Mohd Lizam and Shamsudin, Shafiza (2017) Factors influencing resident’s decision to reside in gated and guarded. Journal of Engineering Science and Technology (4). pp. 221-228. ISSN 1823-4690

Shareh Musa, Sharifah Meryam and Wan Husin, Hanis and Md Yassin, Azlina and Shafii, Haryati (2017) Aplikasi sistem penuaian air hujan (SPAH) di kawasan perumahan. Jurnal Tekno Sosial, 9 (2). pp. 1-18. ISSN 2229-8940 (In Press)

Sies, M. Farid and Asmuin, Norzelawati and ., Fakhrulrazi and Norsalim, N.A. and Zakaria, Hanis and Pairan, Rasidi and Sadikin, Azmahani (2017) Determine physical properties of an organic citric acid (processed lime juice) dissolve with water using experimental apparatus. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2530-2536. ISSN 2319-8613

Siew, Mooi Lim and Md. Sultan, Abu Bakar and Sulaiman, Md. Nasir and Mustapha, Aida and Leong, K. Y. (2017) Crossover and mutation operators of genetic algorithms. International Journal of Machine Learning and Computing, 7 (1). pp. 9-12. ISSN 2010-3700

Sohu, S and Halid, A and Nagapan, Sasitharan and Fattah, A and Latif, I and Ullah, K (2017) Causative factors of cost overrun in highway projects of Sindh province of Pakistan. IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-6. ISSN 1757-8983

Soon, C. K. and Zaini, Z. and Mohd Ujang, A. and Nagapan, S. and Abdullah, A. H. and Hasmori, M. F. and Rassiah, K. (2017) A case study of green building in Malaysia: cost saving analysis. Pertanika Journal of Science & Technology, 25 (S). pp. 191-196. ISSN 0128-7680

Suhaimi, M. A. and A. Rahman, M. A. and Awang, Mariah and Akasah, Z. A. and Hashim, N. (2017) Problems associated with indoor air quality (IAQ) in classroom and recommended approaches. Politeknik & Kolej Komuniti Journal of Social Sciences and Humanities, 2 (1). pp. 24-30. ISSN 0128-2875

Sulaiman, Mansor and Yusoff, Zailin Shah and Zainuddin, Ahmad Murad and Hisham, Ahmad Irfan Ikmal and Long, Abdullah (2017) Pemeliharaan maslahah di sebalik pensyariatan konsep berpakaian wanita menurut Islam. International Journal of Humanities Technology and Civilization, 2 (1). pp. 62-72. ISSN 2289-7216

Tajul Baharuddin, Mohamad Faizal and Ahmad Tajuddin, Saiful Azhar and Zainal Abidin, Mohd Hazreek and Madun, Aziman (2017) Modelling technique for the assessment of the sub-soil drain for groundwater seepage remediation. MATEC Web of Conferences, 103. pp. 1-8. ISSN 2261-236X

Tay, Kim Gaik and Tiong, Wei King and Choy, Yaan Yee and Ong, Chee Tiong (2017) Method of lines and pseudospectral solutions of the forced korteweg-de vries equation with variable coefficients arises in elastic tube. International Journal of Pure and Applied Mathematics, 116 (4). pp. 985-999. ISSN 1311-8080

Tee, Tze Kiong and Saien, Shanty and Yee, Mei Heong and Mohamad, Mimi Mohaffyza (2017) TRIZ: an alternate way to solve problem for student. International Journal of Academic Research in Business and Social Sciences, 7 (2). pp. 486-488. ISSN 2222-6990

Tengku Mohd, Tengku Azman and Hassan, Mohd Khair and Aris, Ishak and C.S, Azura and K. K. Ibrahim, Babul Salam (2017) Application of fuzzy logic in multi-mode driving for a battery electric vehicle energy management. International Journal on Advanced Science Engineering Information Technology, 7 (1). pp. 284-290. ISSN 2088-5334

Tham, Cheong Sheng and Awang, Mariah and Abdul Rahman, Mohammad Ashraf (2017) Preliminary study of energy and cost saving potential of lighting system in teaching building. Politeknik & Kolej Komuniti Journal of Social Sciences and Humanities, 2 (1). pp. 160-166. ISSN 0128-2875

Tiong, W.K. and Tay, K.G. and Ong, C.T. and Chiew, K.L. (2017) Simulation of undular bores evolution with damping. Dynamics of Continuous, Discrete and Impulsive Systems Series B: Applications & Algorithms, 24. pp. 113-126. ISSN 1492-8760

Ullah, Arif and Mohd Nawi, Nazri and Shahzad, Asim and Khan, Sundas Naqeeb and Aamir, Muhammad (2017) An e-learning system in Malaysia based on green computing and energy level. International Journal on Informatics Visualization, 1 (4-2). pp. 184-187. ISSN 2549-9610

Ullah, Irshad and Baharom, MNR and Ahmad, H. and Luqman, H.M. and Zainal, Zainab (2017) Electric filed intensity of the lightning strikes on lightning air terminals installed on building structures. International Journal of Electrical and Computer Engineering (IJECE), 7 (6). pp. 3105-3113. ISSN 2088-8708

Ullah, Kaleem and Abdullah, Abd Hadi and Nagapan, Sasitharan and Suhoo, S and Khan, M S (2017) Theoretical framework of the causes of construction time and cost overruns. IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-8. ISSN 1757-8982

Utomo, Hadi Prasetyo and Bon, Abdul Talib and Hendayun, Mokhamad (2017) Academic information system in higher education institution toward education 3.0 a preliminary study. Journal of Informatics and Mathematical Sciences, 9 (4). pp. 1289-1294. ISSN 0974-875X

Utomo, Hadi Prasetyo and Bon, Abdul Talib and Hendayun, Mokhamad (2017) Modeling of academic information system in higher education institution toward education 3.0: a literature review. International Journal of Information and Education Technology, 7 (10). pp. 738-742. ISSN 2010-3689

W. Salim, W.S.I. and Mahdi, A.A.M. and Ismail, M.I. and Abas, M.A. and Martinez-Botas, R.F. and Rajoo, S. (2017) Benefits of spark-ignition engine fuel-saving technologies under transient part load operations. Journal of Mechanical Engineering and Sciences, 11 (4). pp. 3027-3037. ISSN 2289-4659

Wagiman, Khairul Rijal and H. Shareef, S. N. Khalidb (2017) Location of voltage sag source by using artificial neural network. Jurnal Teknologi, 79 (2). pp. 11-30.

Wagner, Jürgen P. and Grigg, Nigel and Mann, Robin and Mohammad, Musli (2017) High task interdependence: job rotation and other approaches for overcoming ingroup favoritism. Journal of Manufacturing Technology Management, 28 (4). pp. 485-505. ISSN 1741-038X

Wahid, Herman and Mohd Noor, Ahmad Fakri and Burhanuddin, Dirman Hanafi and Ghazali, Rozaimi (2017) Design of an automated hybrid system for aquaculture and agriculture process and its performance analysis. International Journal of Integrated Engineering, 9 (4). pp. 49-56. ISSN 2229-838X

Wahir, N. A. and Nor, M. E. and Rusiman, M. S. and Gopal, K. (2017) Treatment of outliers via interpolation method with neural network forecast performances. Journal of Physics: Conference Series, 995. pp. 1-7. ISSN 1742-6588

Wan Ibrahim, Wan Mastura and Hussin, Kamarudin and Abdullah, Mohd Mustafa Al Bakri and Abdul Kadir, Aeslina (2017) Geopolymer lightweight bricks manufactured from fly ash and foaming agent. Advanced Materials Engineering and Technology V, 1835 (1). 020048 (1)-020048 (5). ISSN 9780735415058

Wan Ibrahim, Wan Mastura and Hussin, Kamarudin and Abdullah, Mohd Mustafa Al Bakri and Abdul Kadir, Aeslina and Deraman, Laila Mardiah and Sandu, Andrei Victor (2017) Influence of foaming agent/water ratio and foam/geopolymer paste ratio to the properties of fly ash-based lightweight geopolymer for brick application. Indian Journal of Science and Technology, 68 (9). pp. 1978-1982. ISSN 0974-5645

Wan Ikhsan, Syarifah Nazirah and Abdullah, Norfadhilatuladha and Yusof, Norhaniza and Aziz, Farhana and Misdan, Nurasyikin and Wan Salleh, Wan Norhayati and Ismail, Ahmad Fauzi (2017) Preparation and characterisation of polyethersulfone/ hydrous ferric oxide mixed matrix membranes with improved hydrophilicity for treatment of oily waste water. Chemical engineering transactions, 56 (NIL). pp. 175-180. ISSN 2283-9216

Wan Mohamed, Wan Azlinda and Ibrahim, Mohammed (2017) Technical and vocational skills (TVS): a means of preventing violence among youth in Nigeria. Social Sciences & Humanities, 25 (NIL). pp. 11-20. ISSN 0128-7702

Wan Mohamed, Wan Azlinda and Ibrahimi, Mohammed (2017) An analysis of the impact of soft skills on Malaysian technical institutions. Advanced Science Letters, 23 (9). pp. 8984-8987. ISSN 1936-7317

Wijeyesekera, Devapriya Chitral and Ratha, Nurvin and Lim, Alvin John Meng Siang (2017) Critique on the conceptual developments of innovative practices with lightweight fills. MATEC Web of Conferences, 103 (07015). pp. 1-8. ISSN 2261-236X

Wijeyesekera, Devapriya Chitral and Wooi, Eric Kee Loh and Lim, Alvin John Meng Siang (2017) Sustainable hydraulic barrier design technologies for effective infrastructure engineering. MATEC Web of Conferences, 103 (04022). pp. 1-9.

Xavier, Navis Ryan and Abdullah, Norazlin and Muhammad, Norhayati and Mohd Rozalli, Norazatul Hanim (2017) Effect of combining ultrasound with osmotic pre-treatment on osmotic characteristics of pomelo peel. Journal of Science and Technology, 9 (4). pp. 102-108. ISSN 2600-7924

Y.S., Susiapan and Abdul Rahim, Ruzairi and Goh, C.L. and F. R., Hafiz and A. R., Herlina (2017) Intensity profile measurement for carbon steel pipe using gamma-ray tomography. International Journal of Integrated Engineering, 9 (2). pp. 31-34. ISSN 2229-838X

Yaacob, Siti Salwani and Mahdin, Hairulnizam and Kasim, Shahreen (2017) RFID data reliability optimiser based on two dimensions bloom filter. Journal of Telecommunication, Electronic and Computer Engineering, 9 (2-2). pp. 55-60. ISSN 2289-8131

Yaakub, Muhamad Faizal and Basar, Mohd Farriz and Yahaya, Muhammad Sharil and Mohd Noh, Faridah Hanim and Kamarudin, Hanis Zafirah (2017) A micro-power generation from rain shower utilizing PZT and PVDT piezoelectric transducer. Arpn Journal of Engineering and Applied Sciences, 12 (22). pp. 6285-6290. ISSN 1819-6608

Yabagi, Jibrin Alhaji and Kimpa, Mohammed Isah and Muhammad, Muhammad Nmaya and Nayan, Nafarizal and Embong, Zaidi and Agam, Mohd Arif (2017) Nanofabrication process by reactive ion etching of polystyrene nanosphere on silicon surface. Journal of Science and Technology, 9 (3). pp. 145-153. ISSN 2229-8460

Yabagi, Jibrin Alhaji and Kimpa, Mohammed Isah and Muhammad, Muhammad Nmayaya and Rashid, Saiful and Embong, Zaidi and Agam, Mohd Arif (2017) The effect of gamma irradiation on chemical, morphology and optical properties of polystyrene nanosphere at various exposure time. IOP Conference Series: Materials Science and Engineering, 298 (1). pp. 1-11. ISSN 1757-899X

Yahya, Musli Nizam and Sambu, Mathan and Abdul Latif, Hanif and Mohd Junaih, Thuwaibah (2017) A study of acoustics performance on natural fibre composite. International Research and Innovation Summit, 226 (NIL). pp. 1-7. ISSN 1757-8981

Yapin, H. and Suhadi, N. and Esa, Ahmad (2017) Implementation of green skills through the co-curriculum activities among students Technical and Vocational Education Training (TVET) towards development of Green Industry. Elixir Social Science, 107. pp. 47295-47297. ISSN 2229-712X

Yasin, Mohd Norazam and Mohamad Zin, Rosli and Abdullah, Abd Halid and Mahmad, Muhammad Shafiq and Hasmori, Muhammad Fikri (2017) The most common problem facing by the maintenance department: a case study between Universiti Tun Hussein Onn Malaysia (UTHM) and Universiti Teknologi Malaysia (UTM). IOP Conference Series: Materials Science and Engineering (MSE), 271 (NIL). pp. 1-7. ISSN 1757-8984

Yeo, S.W. and Ling, Felix Ngee Leh and Low, V. S. and Toh, K. L. (2017) Physico-chemical properties of Kaolin-organic acid. MATEC Web of Conferences, 103 (07012). pp. 1-6. ISSN 2261-236X

Yohanna, G. and Md Yunos, Jailani and Mohamad, Marlina and Ruth, J. Y. (2017) Polytechnic science lecturers’ intention to use ICT as a tool in northeast Nigeria: a smart PLS approach. Pertanika Journal: Social Sciences & Humanities, 25 (NIL). pp. 1-8. ISSN 0128-7702

Yusof, Yusmarwati and Roddin, Rohayu and Warman, Sarebah (2017) Pembangunan profil standard kebangsaan bagi kemahiran informal orang asli malaysia demi kelestarian warisan etnik. Journal of Humanities, Language, Culture and Business (HLCB), 1 (2). pp. 190-202. ISSN 0126-8147

Yusof, Yusniza and Lai, Chee Sern and Lee, Ming Foong (2017) The effects of worked examples presentation on sub-cognitive loads. Advanced Science Letters, 23 (2). pp. 1073-1076. ISSN 1936-7317

Yusuf, Nur Kamilah and Lajis, Mohd Amri and Ahmad, Azlan (2017) Hot press as a sustainable direct recycling technique of aluminium: mechanical properties and surface integrity. Materials, 10 (902). pp. 1-18. ISSN 1996-1944

Zainal, Abidah and Mustapha, Aida and Saringat, Mohd Zainuri and Raja, Pravind (2017) Braille2Alpha: braille dots recognition with alphanumeric conversion. International Journal on Advanced Science Engineering Information Technology, 7 (4-2). pp. 1492-1497. ISSN 2088-5334

Zainal, Rozlin and Kasim, Narimah and Sarpin, Norliana and Seow, Ta Wee and Shamsudin, Zarina and Mat Radzuan, Indera Syahrul (2017) Decision making methods at initiation phase for housing development. International Journal of Supply Chain Management, 6 (2). pp. 177-182. ISSN 2051-3771

Zainal Abidin, Mohd Hazreek and Saad, Rosli and Wijeyesekera, Devapriya Chitral and Ahmad, Fauziah and Tajul Baharuddin, Mohamad Faizal and Ahmad Tajudin, Saiful Azhar and Madun, Aziman (2017) The influences of basic physical properties of clayey silt and silty sand on its laboratory electrical resistivity value in loose and dense conditions. Sains Malaysiana, 46 (10). pp. 1959-1969. ISSN 0126-6039

Zainal Abidin, Munira and Junqueira-Gonçalves, Maria Paula and V Khutoryanskiy, Vitaliy and Niranjan, Keshavan (2017) Intensifying chitin hydrolysis by adjunct treatments – an overview. Journal of Chemical Technology and Biotechnology, 92 (11). pp. 2787-2798. ISSN 0268-2575

Zainal Abidin, Zuhairiah and Qasem, Musaab Abdulghani and Dahlan, Samsul Haimi and Mohd Jenu, Mohd Zarar (2017) Novel spiral with and without patch EBG structures for EMI reduction. Journal of Telecommunication, Electronic and Computer Engineering, 9 (1-5). pp. 23-26. ISSN 2289-8131

Zainol, Nur Zainatul Nadra and Abdul Majid, Latifah (2017) Sejarah perkembangan tafsir pada zaman Rasulullah SAW, sahabat dan tabiin. Journal of Techno Social, 6 (43). pp. 44-54. ISSN 2229-8940

Zainol, Nur Zainatul Nadra Binti (2017) Study on gender equality: overview the reality of muslim feminist movement. Man In India, 91 (24). pp. 121-132. ISSN 0025-1569

Zainuddin, N. and Abu Bakar, Norhaliza and Karimipour, A. and Roslan, R. (2017) Effect of sinusoidally heating on mixed convection in square cavity filled with a porous medium. ARPN Journal of Engineering and Applied Sciences, 12 (7). pp. 2351-2357. ISSN 1819-6608

Zakaria, Nur Syuhada and Haji Hasan, Sulaiman (2017) Green manufacturing practices (GMP) framework for local small and medium enterprises (SME) in Johor, Malaysia: a review on enablers and barriers and preliminary findings on critical factors. International Journal of Engineering and Technology (IJET), 8 (6). pp. 2578-2581. ISSN 0975-4024

Zaman, Izzuddin and Mohd Rozlan, Syaiful Azmirul and Shiau, Wei Chan and Yusoff, A. (2017) Theoritical modelling of sound radiation from plate. IOP Conference Series: Materials Science and Engineering, 165 (NIL). pp. 1-6. ISSN 1757-899X

Zawawi, Rabiatul Adawiyah and Khairulzaman, Nurul Nasuha and Shamsuddin, Suhadir (2017) Effect of Cr-doped on crystalline phase, surface morphology and electrical properties of charge-ordered Nd0.75Na0.25MnO3 ceramics. Journal of Science and Technology, 9 (3). pp. 45-48. ISSN 2229-8460

Zayadi, R.A. and Abu Bakar, F. (2017) Comparative study on the performance of Au/F-TiO2 photocatalyst synthesized from Zamzam water and distilled water under blue light irradiation. Journal of Photochemistry and Photobiology A: Chemistry, 346. pp. 338-350. ISSN 1010-6030 (Submitted)

Zhang, Wen and Ahmad Termida, Nursitihazlin and Susilo, Yusak O (2017) What construct one’s familiar area? A quantitative and longitudinal study. Environment and Planning B: Urban Analytics and City Science. pp. 1-19. ISSN 2399-8083

Zulkifle, Farizuwana Akma and Hassan, Rohayanti and Kasim, Shahreen and M. Othman, Razib (2017) A review on shoreline detection framework using remote sensing satellite image. International Journal of Innovative Computing, 7 (2). pp. 40-51. ISSN 2180-4371

Zulkifli, Shamsul Aizam and Mamat, Ibrahim and Mokhtarudin, Muhammad Nor Hafiz and Ahmad Shah, Shahrizan (2017) Investigation on raspberry Pi Microcontroller as digital processing controller in back to back converter. Lecture Notes in Electrical Engineering, 1 (NIL). pp. 799-806. ISSN 1876-1119

Zulkifli, Shamsul Aizam and Salimim, Suriana and Abd Halim, Siti Aishah and Zahid, Mohammad Zulfikar and Razali, Siti NurulHuda and Johary, Nor Aishah (2017) Experiment tests on single phase inverter using Raspberry Pi. International Journal of Integrated Engineering (IJIE), 9 (3). pp. 29-34. ISSN 2229-838X

Zuraidi, Siti Nor Fatimah and Abdul Rahman, Mohammad Ashraf and Akasah, Zainal Abidin (2017) Important criteria for measuring heritage building condition. Jurnal Sains Sosial, 2 (NIL). pp. 1-7. ISSN 2462-1463

Book Section

UNSPECIFIED (2017) Rain-light sensor for automated windshield wiper system. In: Anuar, Asyran and Abdul Rahim, Ruzairi and Ahmad, Nasarudin and Nor Ayob, Nor Muzakkir and Ahmad, Anita and Leow, Pei L ing, (eds.) Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 7-10. ISBN 9789670764818

Abdul Hamid, Mariam and Mohamad Fathil Zaki, Amirah Husna and Zulkifli, An Nur Amani and Hamdan, Nasyeha As-Sakina (2017) Pembangunan sistem tempahan jahitan baju (E-tailor) dengan peringatan. In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 78-82. ISBN 9789672110132

Abdullah, Mohd Hafizul Afifi and Othman, Muhaini and Kasim, Shahreen (2017) Comparative analysis of spatio/spectro-temporal data modelling techniques. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-8. ISBN 9789672110583

Abu Bakar, Nor Hidayah and Mohd Zaini, Mohd Zairin Aiza and Mohd Fuzi, Muhamad Firdaus and Hassan, Mohd Fahrul and Radzuan, Muhammad Dinie Al-Syafiq and Hussein, Muhammad Hafeez (2017) Hydraulic bearing puller. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 102-112. ISBN 9789670764986

Abu Kasim, Amirul Imran and Mohd Kassim, Angzzas Sari (2017) Effects of soil variation between peat soil and mineral soil on fruit quality of pineapple (Ananas Comosus) cultivars: N36 and josapine. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 35-38. ISBN 9789670764931

Adnan, Suraya Hani and Ab Halim, Asyraf Hakim (2017) Effect of replacing fine aggregate and cement with lateritic soil and palm oil fuel ash (POFA) on compressive and tensile strength of concrete. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 8-15. ISBN 9789670764849

Adnan, Suraya Hani and Ab Halim, Asyraf Hakim (2017) Effect of replacing fine aggregate and cement with lateritic soil and palm oil fuel ash (POFA) on the compressive and split tensile strength of concrete. In: Concrete Materials. Penerbit Uthm, Uthm, pp. 8-15. ISBN 978-967-0764-84-9

Adnan, Suraya Hani and Kosenin, Nini Azrin Amiera (2017) Performance of lightweight aggregates concrete with substituted aluminium flakes as fine aggregates. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 54-71. ISBN 9789670764849

Adnan, Suraya Hani and Kosenin, Nini Azrin Amiera (2017) Performance of lightweight aggregates concrete with substitution of aluminum flakes as fine aggregates. In: Concrete Materials. Penerbit Uthm, Uthm, pp. 54-71. ISBN 978-967-0764-84-9

Adnan, Suraya Hani and Lee, Tze Hui and Kamarulzaman, Nurul Amirah (2017) Characteristics of concrete containing crushed glass and ceramic waste as fine aggregate material. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 33-53. ISBN 9789670764849

Adnan, Suraya Hani and Martin, Moses (2017) Compressive and flexural strength of concrete containing coconut fiber. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 93-111. ISBN 9789670764849

Adnan, Suraya Hani and Muhamad, Nurul Naimah and Mohd Yassin, Nurain Izzati (2017) Performance of concrete containing coconut shell as coarse aggregates. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 24-32. ISBN 9789670764849

Adnan, Suraya Hani and Osman, Mohamad Hairi (2017) Effectiveness of glass as a substitution for cement and fine aggregate in concrete mix. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-7. ISBN 9789670764849

Adnan, Suraya Hani and Rusli, Nur Zakiah Hanim (2017) Effect of oil palm empty fruit bunches (OPEFB) fibers to the compressive strength and water absorption of concrete. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 112-120. ISBN 9789670764849

Adnan, Suraya Hani and Wan Jusoh, Wan Mohd Ashazmin and Abd Roni, Norwardatun (2017) Study on lightweight concrete by replacing a partial of coarse aggregate with coconut shells. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 16-23. ISBN 9789670764849

Ahmad, Mazatusziha and Vijayakumaran, Kanchana (2017) Barrier properties of pullulan/starch based films modified with lauric acid. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 39-43. ISBN 9789670764931

Ahmad Fuadi, Nur Faizura and Othman, Muhammad Fakri and Senan, Norhalina (2017) Comparative analysis of gamification approaches in education. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 27-31. ISBN 9789672110583

Amiruddin, Mohd Hasril and Marian, Mohd Fairuz (2017) Alat pemantau jarak antara hujung sumpitan dengan benda kerja bagi kimpalan MIG. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 61-79. ISBN 9789672110477

Anak Emley, Eryka Respolyn and Abdul Majid, Nor Shamila and Anak Gay, Sharria Sendai and Ya Shak, Aida Syazwani and Hassan, Mohd Fahrul (2017) Fish scale remover machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 29-40. ISBN 9789672110163

Anuar, Asyran and Aini, Syahmi Afiq Aqmal and Muhammad Basri, Mohd Qamarul Arifin and Abdul Rahim, Ruzairi (2017) Coal fired power plant instrument. In: Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 51-76. ISBN 9789670764818

Anuar, Nur Ameera and Wahid, Norfaradilla (2017) Performance analysis of SWOT suite toolkit on Inter-domain and Intra-domain Web of Things. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 33-39. ISBN 9789672110583

Ariffin, Arihasnida and Haron, Mohamad Ashrul (2017) Alat pemasangan jubin dalam membantu kerja kemasan lantai. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 104-114. ISBN 9789672110477

Che Pa, Nasrul Fikry and Chew, Yi Zhong (2017) Preparation and characterization of activated carbon from palm kernel shell. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 45-52. ISBN 9789670764931

Dol Baharin, Muhammad Zulhusmi and Abd. Manan, Abdul Shukur and Baharom, Muhamad Hafizuddin and Hassan, Mohd Fahrul and Che Mat, Nor Ain and Ahmad, Muhamad Nurhisham (2017) Extruder for food product (otak–otak) with heater and roll cutter. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 76-88. ISBN 9789670764986

Hamid, Hashima and Madar, Ahmad Rizal (2017) Pelaksanaan pembelajaran melalui buku teks digital dalam memperkasakan pengajaran guru di sekolah. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-20. ISBN 9789672110477

Husin, Mohd Asri and Shahrudin, Muhammad Shahrunizam and Sapiange, Muhamad Hanif and Abdul Razak, Siti Zarina and Hassan, Mohd Fahrul (2017) Dried chili seeds separator machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-14. ISBN 9789670764986

Ismail, Irwan Mahazir and Ismail, Mohd Erfy (2017) Video pembelajaran animasi atas talian bagi teknologi pemesinan. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 21-42. ISBN 9789672110477

Ismail, Mohd Erfy and Ismail, Irwan Mahazir (2017) Aplikasi EDM die sinking dengan menggunakan platform android. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 43-60. ISBN 9789672110477

Johar, Ahmad Sufiyan and A. Karim, Mohamad Nur and Mohidin, Mohamad Nasiruddin and Mohd Yazid, Muhamad Afiq Najmi and Hassan, Mohd Fahrul and Nardir, Nur Atikah and Wan Ali, Wan Norsyukriah (2017) Pressure fryer. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 50-62. ISBN 9789670764986

Kadir, Mohd Faiz and Harun, Mohd Zaim and Hassan, Mohd Fahrul and Hamdan, Nur Izzah and Paimin, Noor Farzee and Abdullah, Nor Sharifhatul Adila (2017) Portable mud remover. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 115-130. ISBN 9789672110163

Kamaruddin, Muhammad Hazeem and Yac’cob, Muhammad Afiq Adham and Mohd Haizan, Mohamad Azrul Azhad and Amiruddin, Fatin Nur Ainina and Hassan, Mohd Fahrul and Muhmad Afandi, Farah Danieza (2017) Shallots skin peeler machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 63-75. ISBN 9789670764986

Kasim, Shahreen and Ibrahim, Siti Sarah and Wahid, Norfaradilla and Hafit, Hanayanti (2017) E-kenegaraan online exam practise. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 107-118. ISBN 9789672110019

Kasim, Shahreen and Mohamed Shareef, Siti Hawa and Wahid, Norfaradilla and Hafit, Hanayanti (2017) MIS: mommies information system. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 119-137. ISBN 9789672110019

Kassim, Noordiana and Mohd Norrahim, Mohd Amirul Adli and Zaman Sari, Veni Aida and Arfani, Siti Nurul Atikah (2017) Pembangunan sistem tempahan online kerepek (STOK). In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 38-51. ISBN 9789672110132

Mahamad Zakaria, Muhammad Luqman and Samsudin, Noor Azah and Mohamed, Rozlini and Mustapha, Aida (2017) Facilitator management system for campus orientation programme. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 73-85. ISBN 9789672110019

Mansur, Sity Aishah and Norazhar, Nur Syifaa Sabeerah and A. Talip, Balkis (2017) Potential antibacterial activity of conventionally fermented pineapple peel extracts. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 27-33. ISBN 9789670764931

Marian, Mohd Fairuz and Amiruddin, Mohd Hasril and Masran, Saiful Hadi (2017) Jig mata alat larik bersudut pada mesin canai meja. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 80-93. ISBN 9789672110477

Maskan, Muhammad Haziq and Mohamad Yusuf, Mohamad Wafi and Khalid, Amir and Ishak, Izuan Amin and Zaman, Izzuddin and Sapit, Azwan (2017) Discussion of the technology and research in fuel injectors common rail system. In: Fuel, Automotive and Engine Technology. Penerbit UTHM, pp. 9-22. ISBN 978-967-2916-32-1

Maslan, Andi and Muhammmad, Kamarudin Malik (2017) An improved DDoS detection using hybrid N-Gram heuristic technique. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 41-57. ISBN 9789672110583

Masran, Saiful Hadi and Yunus, Faizal Amin Nur (2017) Jig mata alat bagi kerja melarik bulat. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 94-103. ISBN 9789672110477

Mat Noh, Nurhanisah and Mohamad, Kamaruddin Malik (2017) Comparative analysis of data wiping technique for android using EXT4 file system. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 59-66. ISBN 9789672110583

Mat Yassim, Salehah and Rahiman, Mohd. Hafiz Fazalul and Abdul Rahim, Ruzairi and Wahid, Herman and Mohammad Din, Shahrulnizahani (2017) The applications of ultrasonic sensor. In: Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 11-15. ISBN 9789670764818

Md Saad, Azezan and Abdul Rahim, Ruzairi and Ahmad, Anita and Abas, Khairul Hamimah and Mohammad Din, Shahrulnizahani (2017) RFID-based sensor for corrosion monitoring in concrete. In: Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 17-24.

Md Yasin, Mohd Suhaimi and Ismail, Ainnul Madiha and Jamil, NorSyahrina and Zainal, Yumni Hidayaah (2017) Pembangunan CD interaktif: penasihat kesihatan anda bagi Pusat Kesihatan Universiti (PKU). In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 60-67. ISBN 9789672110132

Mohamad Sa’ad, Mohamad Syahid and Hassan, Mohd Fahrul and Junairi, Mohamad Hasrul and Kamaruzaman, Mohamad Ridzuan and Ismail, Mohamad Rizal (2017) Portable marketing set. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 93-102. ISBN 9789672110163

Mohamed Ali @ Md Hani, Mohd Hatta and Mohmed Asri, Mohamad Haikal Emir and Taufik, Muhammad Farhan and Mohd Shauji, Muhammad Alif (2017) Pembangunan aplikasi android untuk mempelajari tulisan jawi secara M-learning. In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 8-15. ISBN 9789672110132

Mohd Apandi, Muhammad Noorakmal and Azali, Muhammad Syafiq and Hassan, Mohd Fahrul and Omar, Nur Izzati and Ramli, Muhammad Shahrizzat and Emran, Muhammad Syahir (2017) Cakar ayam shaping machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 81-91. ISBN 9789672110163

Mohd Azmi, Mohd Ayub and Abdul Ghani, Luqman Ul-Hakimi and Zakaria, Nur Aqilah and Ahmad Nayan, Nurul Syadatul Athira and Hassan, Mohd Fahrul (2017) Cheese tart press machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 103-114. ISBN 9789672110163

Mohd Fauzi, Noor Akhmazillah and Lee, Andy Chyi Wei and Razali, Muhammad Faiz (2017) Effect of thermal and non-thermal treatment on the quality of honey: a review. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-10. ISBN 9789670764931

Mohd Fauzi, Noor Akhmazillah and Md.Amir Hamzah, Halimatu el Sa’diah and Mislam, Nurhanisah and A Rahman, Nur Atikah binti (2017) Thermal and non-thermal processing of kelulut honey: effect on physicochemical properties, brown pigment and antioxidant activity. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 11-18. ISBN 9789670764931

Mohd Rani, Mohd Hafis and Ismon, Mohd Nur Hakim and Hassan, Mohd Fahrul and Mohd Yusri, Nurul Hamira Yusma and Kassim, Shazreen and Ibrahim, Nur Afizah (2017) Motorized cart. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 113-124. ISBN 9789670764986

Mohd Sidi, Siti Nor Faezah and Che Mat, Faez and Umor, Muhamad Asyraf and Saadon, Mohd Shazlan and Hassan, Mohd Fahrul and Muhammad, Amirul Taufiq (2017) Coconut dehusker machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 1-13. ISBN 9789672110163

Mok, Khiaw Keat and Hassan, Mohd Fahrul and Ng, Chee Seng and Amir, Nurul Natasya and Ibrahim, Nor Syahira Syeri and Ahmad Maulana, Nur Shafikah (2017) Portable panel air conditioner. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 53-68. ISBN 9789672110163

Mustafa, Muhammad Syahmi Anat and Hassan, Mohd Fahrul and Yusup, Muhaimin and Mohamed, Mohd Azren and Abdul Halim, Siti Nur Hasrat and Zakaria, Nur Syuhada (2017) Kerepek pisang machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 41-51. ISBN 9789672110163

Nasir, Januardi and Ramli, Azizul Azhar (2017) A new hybrid evolutionary algorithm with MCDM for plant forecasting using FIS. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 19-26. ISBN 9789672110583

Nathan, Shelena Soosay and Tang Ren, Shyang and Micheal Law, Mao Sheng and Chong, Shan Choon (2017) Pembangunan aplikasi mudahalih android “Moneytracker". In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 1-7. ISBN 9789672110132

Ngadiron, Mohamad Faridzuan and Mohd Noor, Mohamad Ashraffudin and Hassan, Mohd Fahrul and Mohammad, Nur Adela and Shah Hamid, Saidatul Nabilah and Abd Rahim, Muhammad Syafiq (2017) 3 in 1 processor coconut dehusker machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 28-38. ISBN 9789670764986

Omar, Abdul Halim and Mahdin, Hairulnizam and Jofri, Muhammad Hanif and Mohd Ali@ Hani, Mohd Hatta and Md Yasin, Mohd Suhaimi (2017) Pemantauan keselamatan aset dan kenderaan menggunakan teknologi radio frequency identification (RFID). In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 16-22. ISBN 9789672110132 (Unpublished)

Onn, Nur Amanina and Mohamad, Kamaruddin Malik (2017) Comparisons of seam carving detection techniques for digital images. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 73-82. ISBN 9789672110583

Osman, Mohamad Hairi and A.Rahman, Manisah (2017) Flexural behavior of reinforced concrete beams containing glass wastes as partial replacement of fine aggregate and cement. In: Concrete Materials. Penerbit Uthm, Uthm, pp. 82-92. ISBN 978-967-0764-84-9

Osman, Mohamad Hairi and A.Rahman, Manisah (2017) Flexural behaviour of reinforced concrete beams containing glass wastes as partial replacement of fine aggregate and cement. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 82-92. ISBN 9789670764849

Osman, Mohamad Hairi and Razali, Nurul Faraheka (2017) Effectiveness of glass as a substitute for cement and fine aggregate in concrete mix. In: Concrete Materials Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 72-81. ISBN 9789670764849

Othman, Muhaini and Mohd Yusof, Munirah and Mohamed, Rozlini and Mohd Halil, Norhafizah (2017) Android based application for monitoring patients health and medicine intake. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-14. ISBN 9789672110019

Peraganathan, Megalah and Aman, Hannani and Mohd Yunus, Mohd Amin and Mustapha, Aida (2017) Wedding planner in a box. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 86-95. ISBN 9789672110019

Rahim, Mohd Bekri and Abd Baser, Jamil and Ali, Khairul Fahmi (2017) Perisian simulasi sistem pengkokol. In: Pembangunan Produk dan Reka Bentuk Siri 1. Penerbit UTHM, Batu Pahat, Johor, pp. 115-126. ISBN 9789672110477

Ramle, Rosni and Maidin, Nor Hanisah and Zaipol, Nurul Nadiah and Azali, Nurul Nazihah (2017) Pembangunan perisian kursus bahasa perancis sebagai alat bantu pembelajaran kendiri. In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 68-78. ISBN 9789672110132

Ramly, Rosmalini and Ahmad, Anita and Leow, Pei Ling and Ishak, Mohd Hafis Izran and Mohamed Ali, Mohamed Sultan (2017) Energy harvesting using permanent magnet for power generation. In: Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 77-93. ISBN 9789670764818

Razali, Nor Faizah and Sou, Pui Chia (2017) Effect of sencha (green tea) and silver needle (white tea) addition on the antioxidant activity of probiotic yogurt. In: Biotechnology in Food Properties and Processing. Series1. Penerbit UTHM, Batu Pahat, Johor, pp. 19-26. ISBN 9789670764931

Roslan, Rosfuzah and Khamsa, Syaza Nazurah and Rokashah, Nurul Shahida Azwa and Othman, Siti Azlin (2017) Sistem inventori makmal komputer Jabatan Teknologi Maklumat, Pusat Pengajian Diploma, Uthm (E–Ventori). In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 53-59. ISBN 9789672110132

Saari, Anati Dalila and Mohamad, Kamaruddin Malik (2017) Comparative analysis of digital artifact persistence between file format. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 83-87. ISBN 9789672110583

Selvarajah, Ruban and Ibrahim, Noraini and Saringat, Mohd Zainuri (2017) A proof of concept on real-time air quality monitoring system. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 27-59. ISBN 9789672110019

Senan, Norhalina and Lim, Sie Hui and Suparjoh, Suriawati and Othman, Muhammad Fakri (2017) Enhancing user experience in interactive directory kiosk with virtual walkthrough. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 15-26. ISBN 9789672110019

Subramaniam Chetty, Nithya Dewi and Aman, Hannani and Mohd Yunus, Mohd Amin and Mustapha, Aida (2017) Dream life matchmaker. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 96-106. ISBN 9789672110019

Suhadi, Nor Aisyah and Abdul Rahim, Ruzairi and Yunus, Yusri and Leow, Pei Ling and Mohammad Din, Shahrulnizahani (2017) Smart sensors for structural health monitoring (SHM). In: Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 25-29.

Suhaimi, Muhamad Hafiz and Hassan, Mohd Fahrul and Amirudin, Mohamed Syafiz and Mohamad, Siti Shafika and Ahmad Shah, Mohamaed Hakim and Ngah, Muhammad (2017) Paper plate machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 69-80. ISBN 9789672110163

Sukarman, Muhammad Izwan and Hassan, Mohd Fahrul and Moktar, Muhammad Syukri Amri and Ramli, Mohamad Akmal and Jelani, Mohd Nashafizie and Ab Karim, Nurfarahnabila (2017) Multipurpose automatic Kerisik packaging machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 39-49. ISBN 9789670764986

Sumri, Muhamad Zamir and Anuar, Nurul Azwani and Hassan, Mohd Fahrul and Suhaini, Rozita and Ismail, Salmi and Syed Adnan, Syed Fadhil (2017) Wheelchair lifter. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 89-101. ISBN 9789670764986 (Submitted)

Surani, Mohammad Syakir and Md Yusof, Muhammad Shalihin and Hassan, Mohd Fahrul and Md Junoh, Mohd Safa Ruddin and Hadison, Shahrul Azni and Mohamed Rilwan, Reehana (2017) Loaf slicer machine. In: Engineering Design Project. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 15-27. ISBN 9789672110163

Surip, Miswan and Ungku Fuad, Ungku Zubaidah and Azman, Norizan and Ibrahim, Faridah (2017) Pembangunan aplikasi sistem penasihat pakar dalam dagangan mata wang GBPUSD menggunakan pergerakan purata eksponen (EMA) dan pengayun stokastik. In: Teknologi Maklumat & Aplikasi. Penerbit Uthm, Uthm, pp. 22-37. ISBN 9789672110132

Ulun Azmi, Halimahtul Saadiah and Abdul Rahim, Ruzairi and Abas, Khairul Hamimah and Sahlan, Shafishuhaza and Mohammad Din, Sharulnizahani (2017) Magnetic suspension turbine flow meter. In: Sensor & Instrumentation System. Series 2. Penerbit UTHM, Batu Pahat, Johor, pp. 1-5. ISBN 9789670764818

Wahid, Fazli and Ghazali, Rozaida (2017) Comparative analysis of firefly algorithm for solving optimization problems. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 9-17. ISBN 9789672110583

Wahid, Norfaradilla and Low, Zhen Ying and Kasim, Shahreen and Hafit, Hanayanti (2017) Online korean skincare decision support system. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 138-149. ISBN 9789672110019

Wong, Li Teng and Samsudin, Noor Azah and Mustapha, Aida (2017) Tailoring human resource management in home furnishing business. In: Selected Topics in Information Technology Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 60-72. ISBN 9789672110019

Zainol, Norfazilah and Mohamad, Kamaruddin Malik (2017) Comparitive gait analysis for criminal investigation using leave bag behind technique. In: Research Book – Data Engineering and Information Security Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 67-72. ISBN 9789672110583 (Unpublished)

Zulkarnain, Muhammad Harith Ifwat and Mohd Nazaruddin, Nur Azieyana and Zulkipli, Mohd Fazli and Ismail, Nurul Syahira and Hassan, Mohd Fahrul and Mohd Gaus, Nur Farah Hanan and Abdul Omar, Nurzhatul Aziemah (2017) Fish ball maker machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 15-27. ISBN 9789670764986

Conference or Workshop Item

A. Majid, Masni and Ahmad Tajudin, Rasyidah and Salleh, Norhafizah and Abd. Hamid, Noor Azlina (2017) Passive wall cooling panel with phase change material as a cooling agent. In: GCoMSE2017, 28 Ogos2017, Johor Bahru.

Anuar, N. F. and M. Jamail, N. A. and Rahman, R. and Kamarudin, M. S. (2017) Breakdown characteristic analysis of paper- oil insulation under AC and DC voltage. In: International Research and Innovation Summit (IRIS2017), 6–7 May 2017, Melaka, Malaysia.

Awang-Kanak, Fadzilah and Abu Bakar, Mohd Fadzelly and Mohamed, Maryati (2017) Ethnobotanical survey on plants used as traditional salad food (ulam) in Kampung Taun Gusi, Kota Belud Sabah, Malaysia. In: International Conference on Biological Science, September 2017.

Azlan, U. A. A. and Hadzley, M. and Tamin1, N. Fauzi and Noor, F. M. and Azhar, A. A. and Yusoff, M. Rahimi and Noriman, N. Z. (2017) Observation of built-up edge formation on a carbide cutting tool with machining aluminium alloy under dry and wet conditions. In: MATEC Web of Conferences.

Che-Him, Norziha and Kamardan, M. Ghazali and Rusiman, Mohd Saifullah and Sufahani, Suliadi Firdaus and Mohamad, Mahathir and Kamaruddin, Nafisah @ Kamariah (2017) Spatio-temporal modelling of dengue fever incidence in Malaysia. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Hamdan, M. H. M. and Siregar, J. P. and Bachtiar, D. and Rejab, M. R. M. (2017) Effect of alkaline treatment on mechanical properties of woven ramie reinforced thermoset composite. In: 4th International Conference on Mechanical Engineering Research (ICMER2017), 1–2 August 2017, Swiss Garden Beach Resort, Kuantan, Pahang, Malaysia.

M. Sudin, Azila and Sufahani, Suliadi Firdaus (2017) Mathematical approach for serving nutritious menu for secondary school student using “delete-reshuffle-reoptimize algorithm”. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

M. Yussuf, N. and Embong, Z. and Abdullah, S. and M Masirin, M. I. and Tajudin, S. A. A. and Ahmad, S. and Sahari, S. K. and Anuar, A. A. and Maxwell, O. (2017) The enhancement of heavy metal removal from polluted river water treatment by integrated carbon-aluminium electrodes using electrochemical method. In: iNuSTEC2017, 25 – 27 September 2017, Universiti Tenaga Nasional.

Md Jamien, Fahrulrazi and Embong, Zaidi and Ahmad Tajudin, Saiful Azhar and Ahmad, Salawati and Mat Lazim, Azwan (2017) The optimization of heating temperature for carbon extraction from peat soil. In: iNuSTEC2017, 25 – 27 September 2017, Universiti Tenaga Nasional.

Mohd Jafery, Khawarizmi and Embong, Zaidi and Yee, See Khee and Dahlan, Samsul Haimi and Ahmad Tajudin, Saiful Azhar and Ahmad, Salawati and Sahari, Siti Kudnie and Maxwell, Omeje (2017) Investigation of dielectric constant variations for Malaysians soil species towards its natural background dose. In: iNuSTEC2017, 25 – 27 September 2017, Universiti Tenaga Nasional.

Mokhatar, S. N. and Sonoda, Y. and Kamarudin, A. F. and Md Noh, M. S. and Tokumaru, S. (2017) The effects of pressure dependent constitutive model to simulate concrete structures failure under impact loads. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Mokhatar, S. N. and Sonoda, Y. and Zuki, S. S. M. and Kamarudin, A. F. (2017) Simulation of shear and bending cracking in RC beam: material model and its application to impact. In: IConCEES 2017, 4 - 5 December 2017, Langkawi, Malaysia.

N. Fauzi, Tamin and U. A. A., Azlan and M., Hadzley and N. S., Remle and M. Hairizal, Osman and M. Rahimi, Yusoff and N. Z., Noriman (2017) Study on surface integrity of AISI 1045 carbon steel when machined by carbide cutting tool under wet conditions. In: MATEC Web of Conferences, 2017, Ukrainian State University of Railway Transport, Kharkiv, Ukraine.

Nor, M. E. and A. I. M., Nurul and Rusiman, M. S. (2017) A hybrid approach on tourism demand forecasting. In: ISMAp 2107, October 28, 2017, Batu Pahat, Johor.

Setiawan, A. and Bukit, M. and Kuntadi, I. and Yunos, J. M. and Salleh, K. M. and Sern, L. C. and Sulaiman, N. L. and Mohamad, M. F. (2017) Transferable skills of engineering students and lecturers at universities in Indonesia and Malaysia. In: PROCEEDINGS OF THE 4TH UPI INTERNATIONAL CONFERENCE ON TECHNICAL AND VOCATIONAL EDUCATION AND TRAINING (TVET 2016),, 15–16 NOVEMBER 2016, BANDUNG, INDONESIA.

Setiawan, A. and Bukit, M. and Kuntadi, I. and Yunos, J. M. and Salleh, K. M. and Sern, L. C. and Sulaiman, N. L. and Mohamad, M.F. (2017) Regionalization and harmonization in TVET. In: PROCEEDINGS OF THE 4TH UPI INTERNATIONAL CONFERENCE ON TECHNICAL AND VOCATIONAL EDUCATION AND TRAINING (TVET 2016),, 15–16 NOVEMBER 2016, BANDUNG, INDONESIA.

Sufahani, Suliadi and Mahathir Mohamad, Mahathir Mohamad and Roslan, Rozaini and Kamardan, M. Ghazali and Che-Him, Norziha and Ali, Maselan and Khalid, Kamal and Nazri, E.M. and Ahmad, Asmala (2017) Applied mathematical optimization technique on menu scheduling for boarding school student using delete-reshuffle-reoptimize algorithm. In: ISMAP 2017, October 28, 2017, Batu Pahat, Johor.

Book

Mohd. Fauzi, Noor Akhmazillah and Mohd. Kassim, Angzzas Sari and Razali, Nor Faizah and Mansur, Sity Aishah, eds. (2017) Biotechnology in food properties and processing : series 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764931

Adnan, Suraya Hani and Osman, Mohamad Hairi, eds. (2017) Concrete materials : series 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764849

Hassan, Mohd. Fahrul and Thomas, Muhammad Adrian, eds. (2017) Engineering design project : series 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764986

Hassan, Mohd Fahrul and Thomas, Muhammad Adrian and Ahmad, Md Fauzi, eds. (2017) Engineering design project : series 2. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789672110163

Rahim, Mohd Bekri and Yunus, Faizal Amin Nur and Abd Baser, Jamil, eds. (2017) Pembangunan produk dan reka bentuk : siri 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789672110477

Ibrahim, Rosziati and Jamel, Sapi'ee, eds. (2017) Research Book - data engineering and information security series 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789672110583

Kassim, Shahreen and Mustapha, Aida and Mahdin, Hairulnizam, eds. (2017) Selected topics in information technology : series 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789672110019

Ahmad, Anita and Ishak, Mohamad Hafis Izran, eds. (2017) Sensor & instrumentation system : series 2. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764818

Abdul Hamil, Muhammad Mahadi (2017) Biomedical engineering applications: cell engineering. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764801

Ahmad@Mohamad, Md. Fauzi (2017) Application of Structural Equation Modeling (SEM) in quantitative research. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764771

Maselan @ Mazlan, Ali and Roslan, Rozaini (2017) Teori nombor. Dewan Bahasa Dan Pustaka, Kuala Lumpur. ISBN 9789834913694

Mohamed, Maryati (2017) Insects Of Gunung Ledang, Johor, Malaysia. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789672110071

Mohd. Nassir, Siti Nor Idayu (2017) Transisi kerjaya pendidikan Khas Vokasional teori dan amalan. Penerbit UTHM, Johor, Malaysia. ISBN 9789672110453

Olajide, Sunday Emmanuel and Mohd Diah, Mohd Lizam (2017) Issues relating to residential neighbourhood security challenges. LAP LAMBERT Academic Publishing, Saarbrücken, Germany. ISBN 9783330351691

Wan Muda, Wan Hanim Nadrah and Azmi, Muhd Azuanafzah (2017) Faktor-faktor yang mempengaruhi pencapaian pelajar dalam matematik di FPTV UTHM. Penerbit UTHM, UTHM.

aL-Khalidi, Salah 'Abd Fattah (2017) Oh, begitu rupanya kisah Nabi Adam Alaihissalam: cerita sahih dari langit. Al Khalidi Global Resources, Ampang, Selangor. ISBN 978-967-15045-0-5

Thesis

A Razak, Aliff Hisyam (2017) Optimisation of silicone-based dielectric elastomer transducers by means of block copolymers – synthesis and compounding. Doctoral thesis, Technical University Of Denmark.

A. Rahman, Khairunnisa (2017) The development of energy efficiency estimation system for domestic housing by using quality function deployment approach. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ab. Razak, Abdul Rafiq (2017) Removal of nutrients and heavy metals from domestic and industry using botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abas, Muhamad Azahar (2017) Good governance in national solid waste management policy (NSWMP) implementation: A case study in Kuala Lumpur. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamed, Noor Kamalia (2017) Study on photocatalytic performance of rutile phased TiO2 micro size rods/flowers film towards methyl orange degradation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Muhammad Faqhrurrazi (2017) Effect of liquid properties (water and lime juice) on spray characteristics of deflected flat spray nozzle (AL-75). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Nur Adilah (2017) Fundamental study of pulse electric field effects on hela cell cultured over extracellular matrix protein micro-patterned surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdarrahman Abuhamra, Suaad Ghait (2017) Effect of storage temperature and duration on physico-chemical properties, microbial growth and nutritional composition of papaya and banana fruits. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdelrahman Kabrein, Hashim Ahmed (2017) Improving the indoor air quality (IAQ) through application of the air cleaning technologies for offices building simulated in environmental chamber. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Aziz Ahmad, Muhammad Faisal (2017) Penyebaran keilmuan melalui jaringan ulama Tarekat Naqsabandi di Kepulauan Riau. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Abdul Afiff Fiqhry (2017) Experimental study of biomedical stainless steel 316l vibration assisted milling using retrofittable 1D UVAM worktable. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulaziz Al-Shalif, Sarah Abdulkarem (2017) Improving modified cocomo ii artificial neural network using hyperbolic tangent activation function. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhasan Al-Jarah, Ali Husam (2017) A centralized localization algorithm for prolonging the lifetime of wireless sensor networks using particle swarm optimization in the existence of obstacles. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Haslina (2017) Pengoptimuman jarak laluan mata alat menggunakan algoritma koloni semut untuk proses pengisaran poket. Doctoral thesis, Universiti Kebangsaan Malaysia.

Abdullah, Noor Hazwani (2017) The effect of waste cooking oil methanol molar ratio on yield and properties of biodiesel produced in a mini plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Sharifah Sakinah (2017) Electrodeposition of nickel/copper multi-nanolayer by dual bath technique at ambient temperature. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullahi, Isa (2017) Evaluation of facilities performance on students’ satisfaction in Northern Nigerian Universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Siti Zulaikha (2017) A functional link neural network with modified cuckoo search for prediction tasks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adon, Nur Atiqah (2017) Hardware implementation for cardiac electrical excitation and conduction using an FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Ida Laila (2017) Tapered microfluidic device for multi-particle separation based on sedimentation principle. Doctoral thesis, Universiti Teknologi Malaysia.

Ahmad, Noor Aqilah (2017) A comparative study on wear and corrosion behaviour of tungsten carbide-nickel (Wc-Ni) and tungsten carbide-cobalt (Wc-Co) high velocity oxy-fuel (HVOF) for carbon steel blade. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Zanariah (2017) Pembangunan modul kelas berbalik berasaskan pembelajaran reflektif untuk politeknik premier. Doctoral thesis, Universiti Malaya.

Ahmed, Fuad Hassan (2017) Improving construction materials management practices in construction sites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Bala, Abduladim Salem (2017) Characterization and processing of composite PP/UHMWPE filament for fused deposition modelling application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ajala, , Amkpa Job (2017) A study on thermal conductivity of six unexplored Nigerian clays for possible refractory and insulating materials. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Akbar, Fazal (2017) The effect of marketing strategies on firm performance: a study of furniture manufacturing SMEs in Johor Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al Allam, Allam Musbah (2017) Asphalt binder and mixture performance using Batu Pahat soft clay as modifier. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al-Subari, Saleh Nasser (2017) Online banking adoption among academicians at MTUN Universities in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Ahmad Rizal (2017) Model ramalan permintaan perumahan mengikut kategori rumah di negeri Johor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alshameri, Badee (2017) Combining seismic and geotechnical methods to improve the prediction of physical soil properties. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Amin, Md Ruhul (2017) Self-synchronized converter for fast synchronization between low voltage microgrid and inverter connection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aminnuddin, Mohd Hazim Fadli (2017) Simulation and experimental study of double holes film cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Amreeghah, Ali Abusalah Elmabrok (2017) Transfer of Islamic banking knowledge from GCC Islamic bank headquarter to its subsidiary in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Anis, Mohd Aris (2017) Ujaran berimplikatur dalam teks Sulalatus Salatin. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Anka, Salihu Ibrahim (2017) A hybrid approach for reverse engineering gui model from mobile apps for automated testing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Asan, Amran (2017) Accident causation model for building construction sites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Muhammad Taufik (2017) Diversity and ecology of anurans at selected streams in Taman Negara Johor Endau Rompin, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ayob, Mohd Erdi (2017) Characterization of the measurement uncertainty for the electromagnetic conducted and radiated emission test. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Mohd Fikri (2017) A comprehensive fractal approach in determination of the effective thermal conductivity of gas diffusion layers in polymer electrolyte membrane fuel cells. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baba, Habu Mallam (2017) Framework of property rating practice for financing neighbourhood facilities provision in Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Baharom, Fairuz Bahirah (2017) Solving the volterra integral form of the lane emden equations by homotopy perturbation method and adomian decompostion method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baharom, Syazwani (2017) Effect of composition and sintering temperature on silica-nickel oxide foams by slurry method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahrim, Fatihah Shafiqah (2017) Cogging torque reduction of 6s-4p spoke-type IPMSM using a new combination of rotor design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bakri, Anis Suhaili (2017) Optimization of titanium dioxide (TiO2) thin film using dip coating technique for oxygen gas sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bakri, Anis Suhaili (2017) Optimization of titanium dioxide (TiO2) thin film using dip coating technique for oxygen gas sensor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Basri, Kasbi (2017) Characterization of soft soil using multi-channel analysis of surface waves (MASW) and electrical resistivity method (ERM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bolayemi, Akinbola Kazeem (2017) Land administration and regulation model for improved formal delivery and accessibility of urban lands in Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Buyung, Mohd Reduan (2017) Pembentukan kriteria bagi garis panduan kemudahan asas kolej kediaman lestari di universiti awam. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Che Ani, Noorhidayah (2017) Optimization of gadolinium-doped zinc oxide films for diluted magnetic semiconductor and its effects on organic solar cell performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chen, Wong Keong (2017) Machining feature-based system for supporting step-compliant milling process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Didane, Djamal Hissein (2017) Experimental and simulation study on the aerodynamic performance of a counter rotating vertical axis wind turbine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Doman, Noriyani (2017) Implikasi google APPS dalam pengajaran dan pembelajaran pelajar pesisir UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Doraisamy, Sanitha V. (2017) Abandoned project restoration model (APRM) for residential construction projects. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Dwee, Chiew Yen (2017) Teacher beliefs and practices in communicative language competence towards the development of an autonomous learning model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Elkarghali, Farag A. M. (2017) Hybrid fuzzy-proportionl integral derivative controller (F-PID-C) for control of speed brushless direct current motor (BLDCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Farag A. M., Elkarghali (2017) Hybrid fuzzy- proportionl integral derivative controller (F-PID-C) for control of speed brushless direct curren motor (BLDCM). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fayed Mogalli, Ali Hussein (2017) Integration of building information modelling (BIM) with materials management in construction project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gambo, Abdu (2017) Implication for office environment ergonomic intervention: a study of local government offices in Katsina State of Nigeria. Masters thesis, Universiti Tun hussein Onn Malaysia.

Gamsha, Abdullahi Madaki (2017) A study of flow and heat transfer of nanofluids: between two parallel plates, over a wedge and past a stretching sheet. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gani, Paran (2017) Phycoremediation using botryococcus sp. as nutrients removal in organic wastewaters coupled with hydrocarbon production. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Garba, Abdurrahman (2017) Modified rice husk and activated carbon filters for the removal of organics and heavy metals in water. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamdan, Nuraffefa (2017) Keberkesanan manual pembelajaran kendiri (MPK) Kemahiran berfikir aras tinggi (KBAT) dalam proses pengajaran dan pembelajaran dalam kalangan pelajar politeknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hanapi, Muhammad Ikhmal (2017) Influence of alkali resistant (AR) glass in porcelain clay for vitrified clay pipes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harimon, Mohd Azhar (2017) High temperature fracture toughness and fatigue behavior of ti-zr-mo and w-re alloys for x-ray tube application. Doctoral thesis, Nagaoka University of Technology.

Haron, Siti Haizatul Aishah (2017) Process flow improvement using value stream mapping to reduce waste and lead time in Malaysia healthcare. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hasmurni, Hazriyanto (2017) Komitmen organisasi, kepuasan kerja dan prestasi kerja dalam kalangan pensyarah universiti di Kota Batam Indonesia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Ibnu Anas (2017) The experimental study and numerical simulation of falling liquid film flow on horizontal tubes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Saber Salem (2017) Production of biodegradable poly lactic acid from pineapple industry wastewater by lactobacillus casei fermentation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husen, Abdurezak Tahir (2017) Design and implementation of low cost wireless stethoscope. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussaini, Iliyasu (2017) The effect of using technology task based approach on english language achievement among primary four school students in Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Irchamni, Siti Marpuah (2017) Penguasaan komunikasi bahasa arab melalui kaedah aktif komunikatif di sekolah menengah agama. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Noor Amira (2017) Bottleneck-based heuristic for permutation flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Abdulnasir (2017) Wavelets operational methods for fractional differential equations and systems of fractional differential equations. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Izdihar (2017) Ethnobotanical and ethnopharmacological documentation of antimalarial plants used by the Jakun community in Kg Peta, Endau-Rompin, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Norradihah (2017) Spatial and temporal distribution of butterfly in highland and lowland forests of Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nur Amalina (2017) Documentation, anti-aging activities and phytochemical profiling of selected medicinal plants used by Jakun women in Kampung Peta, Mersing, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaafar, Marliana (2017) High dimensionality carrierless amplitude phase modulation technique for radio over fiber system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jajuli, Fatin Afiqah (2017) A comparative evalaution on the performance and emission characteristics of an internal combustion engine using ceramic and metallic catalytic converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jiuma Mo, Intisar (2017) The impact of capital market development on economic growth among MENA region countries. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Joshua, Ruth Yohanna (2017) Tiv-jakun ethnic conflict in wukari district of taraba state northeast Nigeria: Horizontal inequalities approach. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamal Koh, Hasna Heng (2017) Synchronization for different opinions in Malaysia Multiracial Society: a mathematical exploration study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kazi, Abdul Ghafoor (2017) Antecedents of livelihood of entrepreneurs at the disaster-hit areas of Sindh, Pakistan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khamis, Siti Zubaidah (2017) The effect of injection molding processing conditions and fiber content towards the properties of polypropylene-nanoclay nanocomposites blend with gigantochloa scortechinii fibers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khoo, Poh Teng (2017) Persepsi pelajar terhadap penggunaan koswer multimedia mata pelajaran sains tingkatan tiga. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lagiman, Syahidah (2017) Improvement of relationship between main contractor and subcontractor for successful construction project implementation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Hui Teng (2017) Fabrication and characterization of copper oxide thin film by thermal CVD for ethanol sensor application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Elkamel, Hasan Taher (2017) The development of reynolds averaged navier stokes solver for a two dimensional compressible flow problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. Saad, Magedi Moh (2017) Ram air turbine enhancement for auxiliary power unit replacement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mahadi, Lina Farhana (2017) Fuzzy expert system on diagnosis atherosclerosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahdi, Ahmed Sahib (2017) Effects of reinforcement materials and matrix particle sizes on mechanical properties and wear of recycled aluminum chips. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mahgoub Elsayed, Mazen Hashim (2017) A computational tool for microstrip planar filter design. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansir, Dodo (2017) A disaster risk assessment model for the conservation of cultural heritage sites in Melaka Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Fawwaz Zamir (2017) Substitution-based approach for linguistic steganography using antonym. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansor, Marlini (2017) Keberkesanan penggunaan edubase dalam kalangan pelajar teknikal yang berbeza gaya kognitif, afektif dan psikomotor di Politeknik Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Maskur, Said (2017) Kerangka pentaksiran pendidikan karakter untuk mata pelajaran sains Sekolah Menengah di Kota Batam. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Ali@Yunus, Zalilah Murni (2017) Acid impregnated honeydew rind activated carbon for chromium and zinc removal. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Harun, Noor Hafizzatul 'Izzah (2017) Vein mechanism assessment in under weight, normal weight, over weight and pregnant subjects for risk fector of deep vein thrombosis (DVT). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Husin, Muhammad Muslimin (2017) The characterization of mechanical behaviour on kenaf fibre / polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Saman, Nor Sarwani (2017) Assessing low thermal conductivity of bricks which contain rice husk, corn cob and waste tea as an additive material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Nasir, Noor Fardzilawati (2017) Test cases reduction using similarity relation and conditional entropy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Sai'aan, Nurul Hamizah (2017) Development of a micro-extruder with vibration mode for microencapsulation of human keratinocytes in calcium alginate. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Taujuddin, Nik Shahidah Afifi (2017) Improved thresholding and quantization techniques for image compression. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Yusoff, Hanaffie (2017) The effect of liquidity and solvency on profitability: the case of public-listed consumer product companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Migat Omer, Megat Mohamad Zamer (2017) Influence of ureolytic bacteria (UB) on the engineering properties and microstructure behavior of interlocking compressed earth bricks (ICEB). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Milad Zaltum, Mohamed Ahmed (2017) Investigation on hela cells behaviour induced with pulse electric field for wound healing application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Milad Zaltum, Mohamed Ahmed (2017) Investigation on hela cells behaviour induced with pulse electric field for wound healing application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mior Iskandar Shah, Siti Nazhatul Marina (2017) Prevalence of knowledge, attitude and practice on pesticides safety among oil palm pesticide handlers in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Radiah (2017) Magnetohydrodynamic boundary layer flow in a nanofluid with various stream conditions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Jamil, Ahmad Syakir (2017) Study of kitchen hood water mist system for cooking emission (UL1046) filtration with low pressure delected nozzle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Salleh, Fatin Nabilah (2017) Performance of four-stage cascaded fiber optical parametric amplifier (FOPA) using optisystem. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Yahya, Sufiah (2017) Physical and mechanical behaviour of polysiloxane filled silica sheet. Masters thesis, Universiti Tun hussein Onn Malaysia.

Mohamed Anuar, Rabiatul Adawiyah (2017) Interfacial reaction between SAC305 and SAC405 lead-free solders and electroless nickel/immersion silver (ENImAg) surface finish. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed B. E. Bogelil, Mohamed B. E. (2017) Phytoremediation of Sembrong River waters using neptunia oleracea and pistia stratiotes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Nasir, Noorhamizah (2017) Intelligent modelling and control with fatigue reduction for fes induced knee joint of hemiplegic for rehabilitation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Abdulhakim Abdullah Al-Ezzi (2017) Development of telemedicine system for remote biomedical operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Hadi (2017) The effect of using technology task based Approach on english language achievement among Primary four school students in Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Hadi (2017) The effects of vocational training and other correctional programmes on the reformation, rehabilitation and reintegration of offenders in Nigerian Correctional Institutions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd @ Mohd Nor, Syarul Hakimi (2017) Optimizations and recycling industrial waste (palm oil fly ash) as a pigment in coating technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amin, Azriszul (2017) Application of restaurant waste lipids (RWL) as a binder component in metal injection moulding. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Arif, Muhammad Farhan (2017) A study on ridership capacity analysis at rapid Kelana Jaya Line Station. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fadzil, Nur Hafizah (2017) Challenges to consumers practices toward renewable energy in household from a socio-technical perspective. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Napi, Muhammad Luqman (2017) Fabrication and characterization of nanostructured fluorine doped tin oxide thin film for dssc by hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Nur Hanifah (2017) Employability of local trained skill labour in construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Nor, Mohd Ridzuan (2017) Amalan penggunaan pendekatan konstruktivisme dalam pengajaran guru prinsip perakaunan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salim, Nurul Syamimi (2017) Characterization of thermoset biopolymer in thermoplastic of low and high density polyethylene upon uv irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Anuar (2017) Design and development of ocean monitoring system based on GPS. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Nurrul Rahmah (2017) Continuous biodiesel process using ultrasonic in-line reactor for Jatropha Curcas Oil (JCO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohsen Ali, Bassam Hasan (2017) Design and development of portable home based rehabilitation device. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Suberi, Anis Azwani (2017) Computer aided system for dendritic cells detection and counting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muniandy, Nagentrau (2017) Formulating the plastic deformation expression on coated substrate as a coating selection tool. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Mohd Syafiq Syazwan (2017) Humidity control in different building applications; restaurant and operation theatre. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustapa, Muhammad Wazir (2017) Fabrication of built-in retractable hose mechanism for domestic usage. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Narendra raut, Ashwin (2017) Development of sustainable material for hybrid wall system to improve indoor thermal performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Naseem, Rashid (2017) An improved hierarchical clustering combination approach for software modularization. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nazari, Ain (2017) Kaedah pengesanan automatik salur darah retina untuk imej digital fundus. Doctoral thesis, Universiti Kebangsaan Malaysia.

Nemmang, Mohd Shafie (2017) Development of vehicle lane changing model within u-turn facilities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Nurul Aswa (2017) A hybrid semantic similarity feature-based to support multiple ontologies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Roslan (2017) Study mass transfer of Cd, Hg, As, DDT and chlordane through adsorption onto granular activated carbon. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Norliza (2017) Implementation of luo-rudi phase 1 cardiac cell excitation model in FPGA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Nurhidayah (2017) Persepsi terhadap system pembelajaran elektronik dalam kalangan pelajar Kolej Poly-Tech Mara Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Padil, Suhaili (2017) Kerangka kemahiran employability senibina graduan politeknik. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Qasem Rasheda, Hamid Mohammed (2017) Ultra wideband antenna for microwave imaging using modified fractal structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raji, Abdulazeez Umar (2017) Competency-driven benefits realization model for minimization of post-contract transaction costs in design-build (d&b) delivery systems. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Fazilah (2017) Housing equilibrium price framework for Malaysian middle Class group in affordable housing market. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Mohd Badli (2017) Study the effect of eggs incubation parameter through development of new experimental rig for IKTA quails species. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Mohd Badli (2017) Study the effect of eggs incubation parameter through development of new experimental rig for IKTA quails species. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Roslinda Hani (2017) Development of chitosan/alginate/silver nanoparticles hydrogel scaffold for soft tissue engineering applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Muhammad Nazim (2017) An enhanced Bayesian Network prediction model for football matches based on player performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razman, Ruzaimah (2017) A model of sustainable campus operations for Malaysian public universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Robin, Rolyselra Orbintang (2017) Kajian terhadap kos pembinaan rumah kos rendah di Sarawak. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Mohd Arif (2017) Potensi tanah gambut, batu kapur, zeolit dan karbon teraktif sebagai penjerap komposit untuk merawat larut resapan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Naida (2017) An intervention for motorcycle helmet usage based on technology acceptance model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sakury, Khairudin (2017) Olahan air sisa pusat penyembelihan ayam menggunakan elektrod keluli tahan karat dan aluminum melalui proses gabungan elektro-penggumpalan dan pengelompokan dan penggumpalan dengan menggunakan aluminum sulfat dan poli-aluminum klorida. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Syukur (2017) An improved firefly algorithm for optimal microgrid operation with renewable energy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samat, Nurul Ashikin (2017) An improved imputation method based on fuzzy c-means and particle swarm optimization for missing data. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsi, Mohd Arif (2017) The effects of quenching and aging on the mechanical and physical properties of recycled aa6061 aluminum chips. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarwani, Muhamad Khairul Ilman (2017) Nickel aluminide coating as catalyst in steam methane reforming microreactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saugui, Ali Orozi (2017) The influence of leadership styles on employees’ job performance through the mediation role of employees’ motivation and job satisfaction. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shafin, Noor Afifah (2017) The implementation of persuasive technology principles in mobile application development: a qualitative study. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shanmugan, Vikneswara Abirama (2017) Phycoremediation of NH4+ and PO43- from meat processing wastewater by using microalgae botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shukri, Muhammad Shazwan (2017) Collapsibility behaviour of ABS P400 and PMMA used as sacrificial pattern in direct investment casting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidek, Azmi (2017) FBGA-based implementation of electronic abacus using altera DE2 board. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sockalingam, Kanageswary (2017) Extraction and characterizations of halal gelatin biopolymer from black tilapia bones and scales. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Menega (2017) Comparative study on indoor fungi growth incorporated with different antifungal and wall finishings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Muhammad Azwan (2017) Pembangunan kerangka strategi dalam penyelesaian harta tanah Al-Mafqud di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sulaiman, Nurul Nabila (2017) Determination of corporate real estate composition and performance for selected Malaysian Public Lised Companies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sulakah, Siti Masrah (2017) Aplikasi padlet dalam pengajaran dan pembelajaran komponen sastera (KOMSAS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Norfazillah (2017) Performance evaluation of biodegradable metalworking fluids for machining process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talpur, Shabana (2017) Voluntary corporate governance disclosures and corporate governance mechanism among listed property companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Teuku Muhammad Johan, Teuku Muhammad Zulfadly (2017) Factor of work accident in Indonesian construction site: Medan, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuan Mohd Yasin, Sharifah Nurulhuda (2017) Kerangka penambahbaikan pelaksanaan Program Diploma Kejuruteraan Mekatronik Politeknik di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tukiman, Mohd Mustaqim (2017) Performances of a Spark Ignition (SI) engine fuelled with Liquefied Petroleum Gas (LPG) using Liquid Sequential Injection (LSI) technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Uddin, Jamal (2017) Empirical analysis of rough set categorical clustering techniques based on rough purity and value set. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Umar, Abdullahi (2017) Study on the antecedents of information technology adoption in the Nigerian small and medium scale enterprises. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Usman, Abubakar Sadiq (2017) The mediating infuence of entrepreneurial empowerment on the linkage between Islamic microfinance services and clients’ well-being in Malaysia: perceived assesment of service provider. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Wahab, Norhaliza (2017) Effect of reconstituted method on shear strength properties of peat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Zahari, Wan Zubaidie (2017) The effect of surface treatment on composite interface, tensile properties and water absorption of suger palm fiber/polypropylene composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Watisin, Wazli (2017) Pelaksanaan pembelajaran berasaskan kerja politeknik bersama industri. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf, Nur Kamilah (2017) Effects of hot press forging parameter and life cycle assessment in direct recycling of AA6061 aluminium. Doctoral thesis, UTHM.

Zahari Abdullah, Pauzi (2017) Pembangunan kerangka penyeliaan sekolah yang berkesan di Bintan Kepulauan Riau. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Mohamad Rusydi (2017) Pencirian pelindungan laga tiub silinder fungsi gentian semula jadi/epoksi bergred menggunakan emparan mendatar. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zainudin, Amira Syuhada (2017) Dynamic weighted idle time heuristic for flowshop scheduling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zamri, Aina Naseha (2017) Pembangunan kerangka kerja profesional pengurusanharta tanah wakaf (PHTW) di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zayadi, Rabi’atul ‘Adawiyah (2017) Effects of fluorine modifiers and gold colloids in enhancing photocatalytic activity of TiO2 under visible light irradiation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkipli, Muhammad (2017) Electrical-field activated sintering and forming of micro-components. Doctoral thesis, University of Strathclyde.

Teaching Resource

Abd. Baser, Jamil and Othman, Azra (2017) Buku Teks: Reka Cipta Tingkatan 5. [Teaching Resource]

Berahim, Mazniha and Mohd Hanifa, Rafizah and Mohamad, Shamsul and Omar, Abdul Halim (2017) MODUL P&P: DAT20903 Principles of Dot Net Programming. [Teaching Resource]

Nazarudin, Ainamardia and Abbas @ Ahmad, Lutfiah Natrah (2017) Buku Teks: Asas Kelestarian Tingkatan 5. [Teaching Resource]