Items where Year is 2019

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Number of items: 573.

A Rahman, M N and A Rahman, S A (2019) Feedback survey on usability of enbora method for assessing an exposure to risk factors related to wmsds. Journal of Physics: Conference Series (JPCS), 1150. pp. 1-6. ISSN 1742-6588

A Rahman, M N and Mohamad, S S and Marwah, O M F and Masood, Ibrahim and Hassan, M F and Arifin, A M T and Haq, R H A and Ahmad, S and H, F Haw and Abdullah, Haslina (2019) Inter- and intra- observer reliability of the offera method for assessing exposure risk of computer work-related to wmsds. Journal of Physics: Conference Series (JPCS), 1150. pp. 1-8. ISSN 1742-6588

A. B., Hadzley and T., Norfauzi and U. A. A., Umar and A. A., Afuza and M. M., Faiz and M. F., Naim (2019) Effect of sintering temperature on density, hardness and tool wear for alumina-zirconia cutting tool. Journal of Mechanical Engineering and Sciences, 13 (1). pp. 4648-4660. ISSN 2289-4659

A. Karim, Mohd Hanif (2019) Kualiti persekitaran dalaman dalam mereka bentuk studio lukisan kejuruteraan di sekolah menengah teknik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Malek, Mohammad Hadin and Mustafa, Farahiyah and Mohd Asry, Anis Maisarah (2019) A battery-less power supply using supercapacitor as energy storage powered by solar. International Journal of Power Electronics and Drive Systems (IJPEDS), 10 (1). pp. 568-574. ISSN 2088-8694

A. Rahman, Nur Atikah (2019) The physicochemical and antioxidant properties of double-boiled kelulut honey. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Rahman, Shahril Effendi (2019) Rawatan larut resapan menggunakan penjerap media komposit karbon teraktif, zeolit, batu kapur dan enapcemar sisa kertas. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

A. Salih, Qusay (2019) Enhanced dynamic security assessment for power system under normal and fake tripping contingencies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

A. Talip, Balkis and Neo, Zhi Zing and Hairuddin, Nur Diyana and Radin Mohamed, Radin Maya Saphira and Muhammad, Norhayati and Basri, Hatijah and Abdullah, Norazlin and Mohamad Kahar, Ernna Erynna and Al-Gheethi, Adel Ali Saeed and Abdullah, Shakila (2019) Determination of physicochemical properties of formulated fish feed supplemented with microalgae from bioremediation process. Jurnal Teknologi, 81 (3). pp. 151-157. ISSN 2180–3722

AL-Fadhali, Najib and A Majid, Huda and Omar, Rosli and Mokhtar, Mohd Hezri and Abo Mosali, Najmaddin (2019) Frequency reconfigurable substrate integrated waveguide (SIW) cavity F-shaped slot antenna. Indonesian Journal of Electrical Engineering and Informatics (IJEEI), 7 (1). pp. 135-142. ISSN 2089-3272

AL-Fadhali, Najib and A Majid, Huda and Omar, Rosli and Rahim, M. K. A. and Shah, S. M. and Esmail, B.A.F (2019) Wideband (22-30ghz) mm-wave substrate integrated waveguide (siw) antenna for 5g application. In: 2019 IEEE Conference on Antenna Measurements & Applications (CAMA), Kuta, Bali, Indonesia, 23-25 Oct. 2019. (Submitted)

AL-Fadhali, Najib and A. Majid, Huda and Omar, Rosli and Dahlan, Samsul Haimi and I. Ashyap, Adel Y. and Mohd Shah, Shaharil and A. Rahim, Mohamad K. and F. Esmail, Bashar A. (2019) Substrate integrated waveguide cavity backed frequency reconfigurable antenna for cognitive radio applies to Internet of Things applications. International Journal of RF and Microwave Computer-Aided Engineering, 30 (1). pp. 1-16. ISSN 1096-4290

AL-Fadhali, Najib and A. Majid, Huda and Omar, Rosli and H. Dahlan, Samsul and Ashyap, Adel Y. I. and M. Shah, Shaharil and A. Rahim, Mohamad K. and F. Esmail, Bashar A. (2019) Substrate integrated waveguide cavity backed frequency reconfigurable antenna for cognitive radio applies to internet of things applications. International Journal OF RF & Microwave. pp. 1-16.

AL-Fadhali, Najib and Zainal, Rozlin and Kasim, Narimah and Dodo, Mansir and Ng, Kim Soon and Ali Hasaballah, Abdel Hafiz (2019) The desirability of Integrated Influential Factors (IIFs) model of internal stakeholder as a panacea to project completion delay in Yemen. International Journal of Construction Management, 19 (2). pp. 128-136. ISSN 1562-3599

Abba, Zubainatu (2019) Characterization of botryococcus sp. and identification of carbohydrates metabolic related enzymes toward lipid production. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Mohammed Abdulridha and Lajis, Mohd Amri and Abdul Ridha, Ghassan Shaker (2019) A new methodology for predicting quantity of agglomeration between electrodes in PMEDM environment. International Journal of Mechanical Engineering and Technology (IJMET), 10 (2). pp. 1461-1480. ISSN 0976-6340

Abbas, Mohammed Saad and Azwan, Sapit and Baqer, Nawfel M. and Balla, ,Hyder H. and Hayder, Ali Mohammed (2019) Performance assessment of parabolic trough collector (ptc) by using three passes receiver for preheating the fuel oil under Iraq climate for different mass flow rates. International Journal of Mechanical & Mechatronics Engineering, 19 (5). pp. 132-141.

Abbas, Zaheer (2019) The effect of performance based grant on research and development at Pakistani Public Universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abbas Al-Sallami, Ali Hashim (2019) An efficient up-link load reduction model based on clustering in vanets. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamed, Noor Kamalia and Ahmad, Mohd. Khairul and Mazlan, Muhammad Hazli and Hayati Hairom, Nur Hanis (2019) Titanium dioxide film based photocatalytic application for degradation of dyes. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 57-77. ISBN 978-967-2306-25-2

Abd Hamid, Abd Hamid (2019) Developing risk management framework for wellhead and christmas tree equipment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hamid, Ruhiana Idayu (2019) Keberkesanan carta pembelajaran Omygram terhadap tahap pencapaian pelajar PVMA dalam mata pelajaran Bahasa Inggeris bagi topik plurals. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Karim, Ahmad Zahir Zakwan (2019) Analysis of grounding performance for different bio filler medium effect. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Nasir, Nurathirah (2019) Pengaruh elemen gamifikasi terhadap motivasi pelajar menggunakan aplikasi quizizz. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Mohd Hilmi Izwan (2019) The construction waste management framework for reducing illegal dumping activities in the construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahim, Mohd Hilmi Izwan (2019) A selective approach for energy-aware video content adaptation decision-taking engine in android based smartphone. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Roni, Norwardatun (2019) Study of recycled concrete aggregate as filter media for phosphorus removal in synthetic wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Samad, Muhammad Izzuddin and Mohamad, Khairul Anuar and Nordin, Mohammad Syahmi and Nayan, Nafarizal and Alias, Afishah and Othman, Marinah and Boland-Thoms, Adrian and Vickers, Anthony John (2019) Band anti-crossing modelling on tailored Ga1-xInxNyAs1-y band gap energy based nitrogen fraction. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 90-95.

Abd Samad, Muhammad Izzuddin and Mohamad, Khairul Anuar and Nordin, Mohammad Syahmi and Nayan, Nafarizal and Alias, Afishah and Othman, Marinah and Boland-Thoms, Adrian and Vickers, Anthony John (2019) Band anti-crossing modelling on tailored ga1-xinxnyas1-y band gap energy based nitrogen fraction. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 90-95. ISSN 2332-3299

Abd Samat, Mohd Nasri (2019) High voltage gain DC-DC converter using interleaved switching technique with PWM for current stress. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd. Samad, Noorazman and Ghazalan, Mohd Shahzuan and Wan Ahmad, Wan Mohd Rashid and Ismail, Affero and Harun, Hairuddin and Ismail, Mohd Erfy and Amiruddin, Mohd Hasril and Razali, Nizamuddin (2019) Level of readiness to become entrepreneurs among lifelong learning programmes participants in Malaysian community colleges. Journal of Technical Education and Training, 11 (1). pp. 143-150. ISSN 2229-8932

Abdul Hadi, Abdul Wahab (2019) Soil compaction of peat under the influence of electrokinetic stabilization (EKS) treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Hadi, Fatin Shaqira (2019) Generation of pulsed dual wavelength erbium doped fiber laser. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Haq, Reazul Haq and Wahab, Mohd Saidin and Wahit, Mat Uzir (2019) Impact test and bioactivity properties of polycaprolactone (PCL) by addition of nano-montmorillonite (MMT) and hydroxyapatite (HA). Applied Mechanics and Materials, 446. pp. 1129-1133. ISSN 1660-9336

Abdul Hassan, Norhidayah and Ruzi, Nur Azni and Mohd Shukry, Nurul Athma and Putra Jaya, Ramadhansyah and Hainin, Mohd Rosli and Mohd Kamaruddin, Nurul Hidayah and Abdullah, Mohd Ezree (2019) Physical properties of bitumen containing diatomite and waste engine oil. Malaysian Journal of Fundamental and Applied Sciences, 15 (4). pp. 528-531. ISSN 2289-5981

Abdul Jamil, Muhammad Mahadi and Abd Rahman, Nur Adilah and Mohamad Ishak, Daing Noor Farhanah and Adon, Mohd Nazib and Chew, Chang Choon and Ambar, Radzi and Abdul Wahab, Ridhwan (2019) Combined effect of neolamarckia cadamba leaves and electroporation method on hela cell anti- proliferation process. In: 2019 9th IEEE International Conference on Control System, Computing and Engineering (ICCSCE), 29 Nov.–1 Dec. 2019, Penang, Malaysia.

Abdul Kadir, Adibah and Abdul Hamid, Mariam and Md Amin, Noor Dina and Maulad Bahrol, Khadijah and Ismail, Fadillah (2019) Knowledge management models. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 25-36. ISBN 978-967-2306-31-3

Abdul Kadir, Adibah and Maulad Bahro, Khadijah and Mohd Rosli, Nur Amalina and Ismail, Fadillah (2019) Women and flexitime. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 63-70. ISBN 978-967-2306-31-3

Abdul Kadir, Adibah and Maulad Bahrol, Khadijah and Humaid Alhosani, Adnan Ali Hassan and Ismail, Fadillah (2019) Maternity leave and paternity leave. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 81-88. ISBN 978-967-2306-02-3

Abdul Kadir, Adibah and Salleh, Siti Hasliah and Johar, Sarawati and Mohd Rosli, Nur Amalina and Ismail, Fadillah (2019) Leadership competency. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 37-48. ISBN 978-967-2306-31-3

Abdul Kadir, Adibah and Tasmin, Rosmaini and Ismail, Fadillah and Abdul Hamid, Nor Aziati (2019) Under what conditions would a strike be illegal. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 61-68. ISBN 978-967-2306-02-3

Abdul Latif, Noradila and Auspan, Afiffikri and Mustapa, Mohammad Sukri and Mohd Joharudin, Nurul Farahin and Nasir, Nurul Fitriah (2019) Effect of loading rates and single edge notch bending (SENB) specimen thicknesses on shear lips formation for Al6061 alloy. Malaysian Journal of Microscopy, 15. pp. 38-45. ISSN 1823-7010

Abdul Musid, Nurhafizah and Mohd Affandi, Haryanti and Husain, Siti Hamidah and Mustaffa Kamal, Mohd Firdaus and Abas, Nor Haslinda (2019) The development of on job training assessment constructs and elements for construction technology students in Malaysian vocational college. Journal of Technical Education and Training, 11 (1). pp. 26-35. ISSN 2229-8932

Abdul Rahim, Saliza (2019) Minat dan motivasi penguasaan konsep sains proses hidup tumbuhan dalam kalangan murid sekolah rendah di Daerah Batu Pahat, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rani, Abdul Ismail and Mohamad, Khairul Anuar and Ibrahim, Pungut and Saad, Ismail and Kumar, Ghosh Bablu and Pien, Chee Fuei and Alias, Afishah (2019) A hybrid inorganic-organic heterojunction device: structural morphology and electrical response. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 1-18. ISBN 978-967-2306-25-2

Abdul Rashid, Munirah Az Zahra and Mohd Shah, Shaharil and Ponniran, Asmarashid (2019) A compact triple-notch band ultra-wideband antenna. Universal Journal of Electrical and Electronic Engineering, 6 (5H). pp. 55-66.

Abdul Razak, Azizul Azra (2019) Mekanisme pemerkasaan peranan da’i dalam dakwah bil hal: analisis tematik surah al-Taubah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Razak, Azizul Azra and Abdul Rahim, Mohd. Hisyam (2019) The mechanism of empowering the Da’i role in Da’wah bil hal using surah Al-Taubah. American Journal of Humanities and Social Sciences Research (AJHSSR), 3 (4). pp. 155-162. ISSN 2378-703X

Abdul Ridha, Salih Meri (2019) Experimental and simulation analysis for performance enhancement of elliptical savonius wind turbine by modifying blade shapes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Sharif, Safian and Sasahara, Hiroyuki (2019) Machining performance of vegetable oil with phosphonium- and ammonium-based ionic liquids via MQL technique. Journal of Cleaner Production, 209. pp. 947-964. ISSN 0959-6526

Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Sharif, Safian and Sasahara, Hiroyuki (2019) The influence of modified vegetable oils on tool failure mode and wear mechanisms when turning AISI 1045. Tribology International, 129. pp. 347-362. ISSN 0301-679X

Abdul Wahab, Hanani and M. Rus, Anika Zafiah and Abdullah, M. F. L. and Abdullah, Nur Munirah (2019) Sound absorption coefficient and water content responses in acoustic analysis based on renewable polyurethane foam composites. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S3). pp. 1576-1581. ISSN 2278-3075

Abdulameer, Ali Hussein and Mohd Noor, Siti Noor Fazelah and Nasser, Wisam Khalis (2019) Systemic functional linguistics of political articles in eastern and western online news. Humanities & Social Sciences Reviews, 7 (5). pp. 24-31.

Abdulhafidh Al-Dubai, Ala Abobakr (2019) Hand and elbow gesture recognition based on electromyography signal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhasan, Raed Abdulkareem (2019) Design a high gain UWB mimo uniplanar monopole antenna with FSS array for metallic object microwave imaging. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abduljabbar, Yasir Amer (2019) New methods of partial transmit sequence for reducing the high peak-to-average-power ratio with low complexity in the ofdm and f-ofdm systems. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Aslam (2019) Grid expansion factor for the shooting method solution of convection-diffusion equation. ARPN Journal of Engineering and Applied Sciences, 14 (7). pp. 1370-1376. ISSN 1819-6608

Abdullah, Aslam and Suresh, Surendran and Mohd Saleh, Siti Juita Mastura and Zulkafli, Mohd Fadhli and Abdul Ghafir, Mohammad Fahmi (2019) Numerical study of the flow over symmetrical airfoils with ground effects. International Journal of Mechanical Engineering and Technology (IJMET), 10 (4). pp. 1106-1113. ISSN 0976-6340

Abdullah, Hadi (2019) Automated platform for histological race and sex comparison of human cortical bone. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Fahmy and Lai, Wei Sieng and Muhammad Isa, Hamdan (2019) Technical efficiency evaluation: study on Malaysian electrical and electronics firms. Asian Academy of Management Journal, 24 (2). pp. 1-19.

Abdullah, Mohd Fahmy and Lai, Wei Sieng and Muhammad Isa, Hamdan (2019) Technical efficiency evaluation: study on Malaysian electrical and electronics firms. Asian Academy of Management Journal, 24 (2). pp. 1-19. ISSN 2180-4184

Abdullah, Nur Munirah (2019) Synthesis and characterization of ultra violet curable renewable polymer graphite composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Nurul Aida Suhaila (2019) Pembangunan dan keberkesanan kit penyongsang dalam proses pengajaran dan pembelajaran (PDP) di kolej vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullahi, Isa and Wan Yusoff, Wan Zahari (2019) Influence of facilities performance on student’s satisfaction in Northern Nigerian universities: Results from interim study. Facilities, 37 (3/4). pp. 168-181. ISSN 0263-2772

Abdullahi, Tijjani (2019) Development and optimization of zeolite synthesis route from natural koalin for adsorption of dyes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullahi Ahmad, Kabiru (2019) Jatropha curcas oil as a bio-based rejuvenating agent for reclaimed asphalt pavement mixtures. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulrahim Zaid, Ahmed Adnan (2019) The impact of green human resource management and green supply chain management practices on sustainable performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulrahman, Anas Malik (2019) Enhancement of strain sensor sensitivity by combination of polarization maintaining fiber and single mode fiber in sagnac loop. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulrahman Oyekanmi, Adeleke and Abdul Latiff, Ab Aziz and Daud, Zawawi and Radin Mohamed, Radin Maya Saphira and Ab Aziz, Nur Adila and Ismail, Norli and Rafatullah, Mohd. and Ahmad, Akil and Hossain, Kaizar (2019) Adsorption of pollutants from palm oil mill effluent using natural adsorbents: optimization and isotherm studies. Desalination and Water Treatment, 169. pp. 181-190. ISSN 1944-3994

Abdulrazzaq Al-Iedani, Ali Salman (2019) Investigating inter-turn fault in transformer using TTR and FRA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulwahhab, Abdullah Raed (2019) Accurate range free localization in multi-hop wireless sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Afarulrazi (2019) Design of dual-input two phase dc/dc converter with modified pulse width modulation (mpwm). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Faridah and Zayadi, Rabiatul Adawiyah (2019) The synthesis of gold nanoparticles and its extensive applications. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 19-39. ISBN 978-967-2306-25-2

Abu Bakar, Fazleen Izzany and Abu Bakar, Mohd Fadzelly and Abdullah, Norazlin and Endrini, Susi and Fatmawati, Sri (2019) Optimization of extraction conditions of phytochemical compounds and anti-gout activity of euphorbia hirta l. (Ara Tanah) using response surface methodology and Liquid Chromatography-Mass Spectrometry (LC-MS) analysis. Evidence-Based Complementary and Alternative Medicine, 2020. pp. 2-12.

Abu Bakar, Mohd Hadzley and Fahmi, Naim and Tamin, Norfauzi and Afuza, Anis and Izamshah, Raja and Kasim, Shahir and Mohd Amran, Mohd Amran and Shamsudin, Noorazizi and Raffi, Nurul Fatin (2019) Surface integrity study for FC300 cast iron using TiAIN ball end mill. Jurnal Tribologi, 21. pp. 35-46.

Abu Bakar, Norhaliza (2019) Simulation of steady mixed convection in a lid-driven cavity filled with newtonian fluid by finite volume method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abu Hassan, Mohd. Sallehuddin (2019) Penilaian tahap kualiti perkhidmatan talian jalur lebar di sekolah berasrama penuh oleh Kementerian Pendidikan Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Seman, Noor Aslinda and Govindan, Kannan and Mardani, Abbas and Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Hooker, Robert E. and Ozkul, Seckin (2019) The mediating effect of green innovation on the relationship between green supply chain management and environmental performance. Journal of Cleaner Production, 229. pp. 115-127. ISSN 0959-6526

Abu Zaki, Anis Izura and Ibrahim, Nabilah and Sari, Suhaila and Mahadi, Lina Farhana (2019) Applied of image processing technique on semi-auto count of skin spot. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 51-62. ISBN 978-967-2306-26-9

Abubakar, Muhammad (2019) A framework for key factors affecting compliance with self-help housing standards in Bauchi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adeyemi, Ifeoluwa Adedoyin (2019) Assessing knowledge transfer for facility management to the development of new students' residential colleges in UTHM, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ag. Damit, Dayang Haryani Diana (2019) Understanding the attitude and repurchase intention towards halal food product among non-muslim consumers in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Izah Rafidah (2019) Optimize class time tabling by using genetic algorithm technique in UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Muhammad Ariff Haikal (2019) Investigation on removal mechanism in catalytic aided electrical discharge machining of polycrystalline diamond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nurul ‘Atiqah (2019) New techniques for multiple wavelength fiber laser generation based on edfa and tdfa. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2019) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Nordin, Mohd Nor Azmi (2019) The evaluation of acoustic characteristic performance on natural sound absorbing materials from cogon grass waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Raus, Azli Amin (2019) Performance evaluation of alsi10mg mould insert material fabricated by selective laser melting process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Shahbudin, Siti Nurshahmira (2019) Analysis of sintered WC-TIC-6CO by using powder metallurgy process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Mohammed (2019) Nonlinear robust control of functional electrical stimulation system for paraplegia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Khalaf, Bashar (2019) An improved agent-based adaptive protection model for distributed denial of service flooding attack and flash crowd flooding traffic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmodu, Adaji Adejah (2019) Post disaster housing reconstruction framework for flood victims: Lokoja, Kogi State, Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ajiya, Adamu Dahiru (2019) Polylactic acid/thermoplastic tapioca starch blend incorporated with selected essential oils for active food packaging. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al-Atrakchii, Khaldoon Ammar (2019) Faulty sensor detection mechanism using multi-variate sensors in IoT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Al-Gheethi, Adel and Noman, Efaq and Radin Mohamed, Radin Maya Saphira and Ismail, Norli and Abdullah, Abd Halid and Mohd Kassim, Amir Hashim (2019) Optimizing of pharmaceutical active compounds biodegradability in secondary effluents by β-lactamase from Bacillus subtilis using central composite design. Journal of Hazardous Materials, 365. pp. 883-894. ISSN 0304-3894

Al-Mohammedawi, Ali Jber Mshkil (2019) A comparative study of MPPT and voltage regulator controllers for controlling output voltage in PV applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alblooshi, Saeed and Abd Hamid, Nor Aziati (2019) A review of the literature on the issues and roles of E-Learning in UAE higher education. Advanced Science Letters, 25 (1). 221-224(4). ISSN 1936-6612

Ali, Azita and Abdul Rashid, Intan Shariena and Ea, Suk Yong (2019) The effect of using learning portal on primary school students in the subject of design and technology. Universal Journal of Educational Research, 7 (12A). pp. 68-74.

Ali, Azita and Abdul Rashid, Intan Shariena and Ea, Suk Yong (2019) The effect of using learning portal on primary school students in the subject of design and technology. Universal Journal of Educational Research, 7 (12A). pp. 68-74.

Ali, Haseeb (2019) Improved adaptive semi-unsupervised weighted oversampling (IA-SUWO) using sparsity factor for imbalanced datasets. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Mohamed Elfadeel (2019) Impact of human resource management towards organisational performance: the mediating role of employee skills, attidute and behaviour in construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Mohammed Ahnaf (2019) Implementation of hashed cryptography algorithm based on cryptography message syntax. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Mohammed Qasim (2019) A new sinkhole attack detection algorithm for RPL in wireless sensor networks (WSN). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Noorwirdawati and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and Abdullah, Siti Radziah and Jamellodin, Zalipah (2019) Reinforced Concrete Beams with Opening Strengthened using CFRP Sheets. The International Journal of Integrated Engineering, 11 (8). pp. 303-312. ISSN 2229-838X

Ali, Sajjad (2019) Strength prediction and durability performance of concrete containing coal bottom ash as supplementary cementitious material under aggressive environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali Al-Shami, Mohammed Hamid (2019) Improving contractors’ practices of Industrialised Building System (IBS) implementation in construction industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Nor, Abdirahman Sidow (2019) Development of compact circular polarized antenna for WLAN application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Afishah and Lias, Jais and Mohamad, Khairul Anuar (2019) Delafossite oxide materials as a p-type transparent conducting oxide. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 165-172. ISBN 978-967-2306-25-2

Alsaeedi, Yaser Abdulwahab Ali (2019) Perceptions of developers in green home project in Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alsanafi, Ismael Hasan and Mohd Noor, Siti Noor Fazelah and Abdul Kadir, Zulida (2019) 'Judgemental category' is the major concept in ntozake shange's “For colored girls who have considered suicide/when the rainbow is enuf”. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 256-264. ISSN 2249 – 8958

Altayib Sahhouk, Masoud Albasheer (2019) Harmonic elimination by switching angle optimization technique for multilevel inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ang, Shin Yin and Mohd Razali, Siti Noor Asyikin and Kek, Sie Long (2019) Optimized preference of security staff scheduling using integer linear programming approach. International Journal of Advanced Computer Technology (COMPUSOFT), 8 (4). pp. 1-9. ISSN 2320-0790

Annammala, Kogila Vani and Nainar, Anand and Mohd Yusoff, Abdul Rahim and Yusop, Zulkifli and Bidin, Kawi and Dominic Walsh, Rory Peter and H. Blake, William and Abdullah, Faizuan and Sugumaran, Dhinesh and Gopal Pillay, Khuneswari (2019) Environmental forensics: a multi-catchment approach to detect origin of sediment featuring two pilot projects in Malaysia. In: Improving Flood Management, Prediction and Monitoring. Emerald, pp. 49-61.

Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Gani, Paran and Ibrahim, Alfituri and Mohd Kassim, Amir Hashim (2019) Scenedesmus biomass productivity and nutrient removal from wet market wastewater, a bio-kinetic study. Waste and Biomass Valorization, 10. pp. 2783-2800. ISSN 1877-2641

Ariffin, Athirah (2019) Assessment of the effects of greywater discharge by using streeter-phelps model. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asadullah, Asadullah (2019) Cogging torque reduction of segmented HEFSM using combined technique of notching and chamfering for performance improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asmara, Y. P. and Sutjipto, A. G. E. and J. P., Siregar and T., Kurniawan and Jaafar, Jaafar (2019) Analyses corrosion prediction software for CO2 corrosion of carbon steel using statistical formulas. International Journal of Mechanical Engineering and Robotics Research, 8 (3). pp. 374-379. ISSN 2278-0149

Awg Abdul Rahman, Aqilah (2019) Prioritization of conservation areas using species distribution modeling based on current data of butterflies in Johor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ayaz, Muhammad (2019) The effect of peer firms determining firm capital structure: evidence from manufacturing in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Azhari, Nur Wahidah (2019) The performance of Takakura composting using food waste from Makanan Ringan Mas Industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizulkarim, Azra Hazwanie (2019) Investigation of porcupine bezoar extract (Hystrix Brachyuran) on hela cell combined with electroporation method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azlan, W. M and Salleh, S. M and Mahzan, S and Sadikin, A and Ahmad, S (2019) Experimental dataset to develop a parametric model based of DC geared motor in feeder machine. International Journal of Electrical and Computer Engineering (IJECE), 9 (3). pp. 1-5. ISSN 2088-8708

B. M. Shariff, M. Riduan and Abdullah, Mohammad Faiz Liew and B. A. Latiff, M. Yusop and B. Hj. Mat Nor, Rosly (2019) Quantitative infrared thermography resolved leakage current problem in cathodic protection system. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). pp. 416-424. ISSN 2278-3091

Bader Ali, Ahmed Suliman (2019) Performance of hot mix asphalt using peat modified asphalt binder. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Badran, Mohammed Falih and Moorthy, Kohbalan and Zukifi, Nor Saradatul Akmar and Mohamad, Mohd Saberi and Deris, Safaai and Md.Sahar, Nan (2019) Propose a new Firefly-Fast Learning Network model based Intrusion-Detection System. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (1252). pp. 146-152. ISSN 2278-3075

Badran, Mohammed Falih and Moorthy, Kohbalan and Zukifi, Nor Saradatul Akmar and Mohamad, Mohd Saberi and Deris, Safaai and Md.Sahar, Nan (2019) Propose a new firefly-fast learning network model based intrusion-detection system. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (12S2). pp. 146-152. ISSN 2278-3075

Bahri, Bibi Zulaika (2019) Investigation of intermediate layer for Ag/Si metal-semiconductor contacts. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Baig, Javaria (2019) The relationships between organizational cynicism, high performance work system, perceived psychological contract violation, workplace incivility and organizational citizenship behaviour among secondary school teachers in Johor Bahru, Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Bakar, N.A. and Roslan, R. and Karimipour, A. and Hashim, I. (2019) Mixed convection in lid-driven cavity with inclined magnetic field. Sains Malaysiana, 48 (2). pp. 451-471. ISSN 0126-6039

Bakhit Mabrouk, Wafi Adam (2019) Modeling and performance evaluation of free space optical link for ground-to-train communications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Bano, N. and Jikan, S.S. and Basri, H. and Adzila, S. and Badarulzaman, N.A. (2019) Physicomechanical properties of nanobiocomposite composed of polylactic acid and biogenic nano hydroxyapatite. The International Journal of Integrated Engineering, 11 (1). pp. 283-289. ISSN 2229-838X

Bano, Nazia (2019) Hydrothermally extracted nanohydroxyapatite from bovine bone as bioceramic and biofiller in bionanocomposite. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bano, Nazia and Sharifah Adzila, Syed Abu Bakar and Jikan, Suzi Salwah and Basri, Hatijah and Kanasan, Nanthini (2019) Extraction of biological apatite from cow bone at different calcination temperatures: a comparative study. Key Engineering Materials, 796. pp. 46-52. ISSN 1662-9795

Basirun, Nurul Fasihah (2019) Strength and water permeability of concrete containing coal bottom ash as cement and fine aggregate replacement material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Benlmoudi, Ali (2019) The reuse of the algerian petroleum sludge as alternative raw material for cement production. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Bhatti, Imtiaz Ali (2019) Measures for mitigating the delay in high-rise building construction projects in Dubai. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bhatti, Imtiaz Ali and Abdullah, Abd Halid and Nagapan, Sasitharan and BHATTI, Nabi Bux and Lakhiar, Muhammad Tahir and MAHAR, Muntazir Mahdi (2019) Building construction labour productivity in arid climate environment. Journal of Applied Engineering Sciences, 9 (22). pp. 125-130. ISSN 2247-3769

Che Hamat, Che Azmeeza (2019) Statistical model on student performance in UTHM by using non-parametric, semi-parametric and parametric survival analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Hassan, Nur Aliaa' (2019) Kit sistem konveyor menggunakan programmable logic controller (PLC) sebagai alat bahan bantu mengajar. Masters thesis, Universiti Tun Hussein Malaysia.

Che Him, Norziha and Yusof, Yusliandy and Samat, Nor Azah (2019) Generalised additive model of DIR based on region, monsoon and state in Peninsular Malaysia. Jour of Adv Research in Dynamical & Control Systems, 11 (12). pp. 228-234.

Che Rahim, Azlen (2019) Anti-proliferative effect of methyl gallate isolated from mangifera pajang kosterman in selected cancer cell lines. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chee Weng, Yap and Jumadi, Nur Anida (2019) Wrist flexion rehabilitation device using arm mbed microcontroller for post-stroke patient. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 87-106. ISBN 978-967-2306-26-9

Chidozie, Chinedu Caleb (2019) A tve curriculum framework for sustainability literacy. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chong, Siaw Chee (2019) Tahap kepuasan guru terhadap perlaksanaan pentaksiran berasaskan sekolah (PBS) bagi Mata Pelajaran Kemahiran Hidup Bersepadu. Masters thesis, Universiti Tun Hussein Onn Malaysia.

D., Nagarajan and J., Kavikumar and M., Lathamaheswari and S., Broumi (2019) Intelligent system stability using type-2 fuzzy controller. International Journal of Integrated Engineering, 11 (1). pp. 270-282. ISSN 2229-838X

D., Nagarajan and M., Lathamaheswari and J., Kavikumar (2019) Type-2 fuzzy controller for stability of a system. Advances in Intelligent Systems and Computing, 986. pp. 197-213. ISSN 2194-5357

D., Nagarajan and M., Lathamaheswari and S., Broumi and J., Kavikumar (2019) Blockchain single and interval valued neutrosophic graphs. Neutrosophic Sets and Systems, 24. pp. 23-35. ISSN 23316055

D., Nagarajan and M., Lathamaheswari and S., Broumi and J., Kavikumar (2019) Dombi interval valued neutrosophic graph and its role in traffic control management. Neutrosophic Sets and Systems, 24. pp. 114-133. ISSN 23316055

Damanhuri, A A M and Subki, A S A and Hariri, A and Tee, B T and Fauadi, M H F M and Hussin, M S F and Mustafa, M S S (2019) Comparative study of selected indoor concentration from selective laser sintering process using virgin and recycled polyamide nylon (pa12). In: 2019 Theory & Technique International Aerosol Conference and Malaysia Air Quality Annual Symposium (T&T IAC and MAQAS), 7 - 8 August 2019, Balik Pulau Hotel, Malacca, Malaysia. (Submitted)

Das, Bhagwan and Abdullah, Mohammad Faiz Liew and Mohammed Ahmed, Adeb Ali and Shaikh, Muhammad Mujtaba (2019) Design of cyclic prefix characteristic-based OFDM system for WiMAX technology. Wireless Personal Communications, 106 (4). pp. 1931-950.

Diblawe, Abdulkadir Mukhtar (2019) Development of compact antenna for RFID application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Djauhari, Maman Abdurachman and Mohd Asrah, Norhaidah and Irianto, Irianto and Ibrahim, Noor Akma (2019) Monitoring variability in complex manufacturing process: data analysis viewpoint with application. International Journal of Supply Chain Management, 8 (2). pp. 1170-1177. ISSN 2051-3771

Durumin Iya, Sani Garba (2019) Modified palm oil fuel ash (pofa) as quartz replacement for the production of porcelain. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

E. L., Sin Jian and Daud, Rosdi and H. M., Ayu and Yusoff, M. H. and Jamiluddin, J. and Shah, A. (2019) Application of a finite element method to predict fatigue life of the knee mobile bearing. In: 1st International Postgraduate Conference on Mechanical Engineering (IPCME2018), 31 October 2018, Pahang, Malaysia.

Ea Suk, Yong (2019) Kesan penggunaan portal pembelajaran pelajar dalam subjek reka bentuk dan teknologi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Elgadi, Ahmed Abdulmottaleb (2019) Sustainable urban planning development indicators model for neighbourhoods in Tripoli, Libya. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Engku Ab Rahman, Engku Shahrulerizal and Zainorabidin, Adnan and Mahfidz, Hazlina and Mohamad, Habib Musa (2019) Ground vibration induced by moving vehicle on soft soil. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 8965-8971. ISSN 2277-3878

Er, Ching Ming (2019) Development of limiting dilution viability pcr method to assess the effectiveness of selected biocides to treat indoor fungi growth. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

FARHAWAHIDAH, AHMAD PUAD (2019) BULETIN PUSAT SUKAN UNIVERSITI EDISI 1/2019. [Bulletin]

FARHAWAHIDAH, AHMAD PUAD (2019) BULETIN PUSAT SUKAN UNIVERSITI EDISI 2/2019. [Bulletin]

FARHAWAHIDAH, AHMAD PUAD (2019) BULETIN PUSAT SUKAN UNIVERSITI EDISI 3/2019. [Bulletin]

FARHAWAHIDAH, AHMAD PUAD (2019) BULETIN PUSAT SUKAN UNIVERSITI EDISI 4/2019. [Bulletin]

FARHAWAHIDAH, AHMAD PUAD (2019) BULETIN PUSAT SUKAN UNIVERSITI EDISI 5/2019. [Bulletin]

FARHAWAHIDAH, AHMAD PUAD (2019) BULETIN PUSAT SUKAN UNIVERSITI EDISI 6/2019. [Bulletin]

Fahrizal, Fadilah Norazni (2019) Fabrication of nanorod TiO2/CU2O heterostructure thin film. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fairolazizi, Muhammad Aiman Zhafran and Rosly, Nurhayati and Jabbar, Balasem Abdulameer (2019) Operational readiness and airport transfer (ORAT) of Kuala Lumpur air traffic control centre (KL ATCC). Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-5. ISSN 2682-7433

Fakhri, Marwan Najm (2019) Modeling middleware platform for supporting communication between IoT devices. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Falah Ali, Wadah (2019) Advanced neural networking and classification techniques for human brain tissues diagnoses: segmenting healthy, cancer affected and edema brain tissues. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Farhood, Hussein Mohammed (2019) Peak to average power ratio reduction in the orthogonal frequency division multiplexing system using partial transmit sequence. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Fitri, Muhamad (2019) The effect of chemical treatment, fibre length, fibre content and injection moulding parameters to uv irradiation resistance of oil palm fibre reinforced composites. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Gabarin Umar, Abubakar (2019) Standard operating procedure for rescue operation in human-made disaster management in Nigeria. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ganason, Premma (2019) Keberkesanan penggunaan aplikasi socrative terhadap pencapaian dan minat murid bagi mata pelajaran sains di sekolah rendah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghadeer, Sabah Hassan (2019) Evaluation of quality of service in fourth generation wireless and mobile networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Muhammad Ihsan (2019) Microemulsions containing centella asiatica extract as antioxidant and anti-acetylcholinesterase agent. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gheni, Hasan Muwafaq (2019) An energy saving smart pedestrian lighting system with IoT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gopalakrishnan, Jaya Bharath and Sabapathy, Thennarasan and Jusoh, Muzammil and Al-Bawri, Samir and Yaasin, M.N. and Osman, Mohamed Nasrun and Abd Rahim, Hasliza and Mat, Mohd Hafizudin and A. Majid, Huda and Ali, Tarmizi and Abdul Wahab, Yasmin (2019) Radiation pattern reconfigurable fm antenna. In: International Conference Computer Science and Engineering, 26 - 28 JUNE 2019, MIRI, SARAWAK.

Guramand, S.K. and Saedudin, R.D.R. and Hassan, R. and Kasim, S. and Ramlan, R. and Salim, B. W. (2019) Optimized bio-inspired kernels with twin support vector machine using low identity sequences to solve imbalance multiclass classification. Journal of Environmental Biology, 40. pp. 563-576. ISSN 0254-870

Hamad Khaleefah, Shihab and A. Mostafa, Salama and Mustapha, Aida and Nasrudin, Mohammad Faidzul (2019) Review of different strategies for coordinative planning of multi-agent systems. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.6). pp. 211-218. ISSN 2278-3091

Hamad Khaleefah, Shihab and Hazeem, Ahmed Abdulbasit and Mohd Foozy, Cik Feresa and Ab Aziz, Mohamad Firdaus and A. Mostafa, Salama and Mustapha, Aida and Ahmed, Ismail Taha (2019) A multimedia courseware for human heart anatomical and functional illustration. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.6). pp. 337-346. ISSN 2278-3091

Hamdan, Nuraffefa and Tee, Tze Kiong and Yee, Mei Heong and Masran, Saiful Hadi and Md Yunos, Jailani and Mohamad, Mimi Mohaffyza and Azid, Nurulwahida and Othman, Widad and Hanapi, Zaliza and Azman, Mohamed Nor Azhari and Haris, Mohd Hairol Mizzam and Shafei, Suzana (2019) An effectiveness of high order thinking skills (HOTS) self- instructional manual for students’ assignment achievement. Journal of Technical Education and Training, 11 (1). pp. 63-72. ISSN 2229-8932

Hamid Ekal, Hassan (2019) Improvement of non-uniform node deployment mechanism for corona-based wireless sensor networks. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamza, Sabah Salim and Yaakob, Mohd. Yuhazri and Ismail, Al Emran and Al Absi, Salih Meri (2019) Influence of geometric shape on the deformation performance of natural jute/epoxy specimens under axial quasi-static compression. TEST Engineeri & Management, 81. pp. 719-732. ISSN 0193-4120

Hamzah, Nur Atiqah and Kek, Sie Long (2019) Fuzzy inference system model from non-fuzzy clustering output. Journal of Engineering and Applied Sciences, 14 (12). pp. 4035-4042. ISSN 1816-949x

Hanipah, Mohd Hafizal (2019) Outdoor thermal comfort index in Malaysian urban areas. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Haron, Nazrul Syaif (2019) Drying kinetics of pepper in swirling fluidized bed dryer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Harsono, Harsono and Rosanti, Susi Yulia and Abu Seman, Noor Aslinda (2019) The effectiveness of posters as a learning media to improve student learning quality. The Journal of Social Sciences Research, 5 (4). pp. 1046-1052. ISSN 2413-6670

Harun, Amran and Husin, Wann Huzida Roza (2019) Is the purchasing behavior of suburban millennials affected by social media marketing? empirical evidence from Malaysia. KOME, 7 (2). pp. 104-127. (Submitted)

Hasan, Ahmed Raheem (2019) Enhancement of network security by use machine learning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashim, Suhaizal and Ismail, Mohd Erfy and Ismail, Affero and Masek, Alias and Ismail, Irwan Mahazir and Razali, Nizamuddin and Samsudin, Mohd Ali (2019) The characteristics of the Computer Supported Collaborative Learning (CSCL) through Moodle: a view on students’ knowledge construction process. International Journal of Engineering & Technology, 8 (1.1). pp. 117-122. ISSN 2227-524X

Hashim Al-Tuma, Khalid Asaad (2019) Smart door lock based on bluetooth and IoT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Hasliza (2019) The failure of integrated circuit: test and analysis. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 173-182. ISBN 978-967-2306-25-2

Hassan, Suhaimi and Yusof, M S and Embong, Zaidi and Kamarudin, Q E and Haq, R H A and Ibrahim, M and Khairilhijra, K R and Marwah, O M F and Sa'ude, N and Ismon, Maznan and Madlan, M A (2019) A study of frequency and pulses for stepper motor controller system by using programmable logic controller. Journal of Physics: Conference Series (JPCS), 1150. pp. 1-5. ISSN 1742-6588

Hassan Saeed, Waddah Waheeb (2019) Recurrent error-based ridge polynomial neural networks for time series forecasting. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hayder, Ali Mohammed (2019) Thermal performance of backflow solar air heating with integrated nanoparticle enhanced pcm absorber storage system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hazriyanto, Hazriyanto and Ibrahim, Badaruddin (2019) The factor analysis of organizational commitment, job satisfaction and performance among lecturers in Batam. Journal of Technical Education and Training, 11 (1). pp. 151-158. ISSN 2229-8932

Heng, Jia Yun (2019) Stakeholders’ perception towards sustainable business locations of purpose-built office in Kuala Lumpur, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hezam Alnadish, Adham Mohammed (2019) Performance of asphalt mixtures containing steel slag aggregate and synthetic fibers. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hidayat, Acep and Isradi, Muhammad and Prasetijo, Joewono (2019) Green technology through porous concrete. Review of Behavioral Aspect in Organizations & Society, 1 (2). pp. 189-194. ISSN 2656-0054

Ho, C.S. and Ab Rani, M. A. and Mohd Nor, M. K. and Ma’at, N. and Hameed Sultan, M. T. and Lajis, M. A. and Yusuf, N. K. (2019) Characterization of anisotropic damage behaviour of recycled aluminium alloys AA6061 undergoing high velocity impact. The International Journal of Integrated Engineering, 11 (1). pp. 247-256. ISSN 2229-838X

Hong Xuan, Mars Wai and Ngu, Xavier and Huong, Audrey (2019) The development of a portable optical system for telemonitoring of skin blood oxygen level. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 39-49. ISBN 978-967-2306-26-9

Hubadillah, Siti Khadijah and Othman, Mohd Hafiz Dzarfan and Sheikh Abdul Kadir, Siti Hamimah and Jamalludin, Mohd Riduan and Harun, Zawati and Abd Aziz, Mohd Haiqal and A. Rahman, Mukhlis and Jaafar, Juhana and Mikihiro, Nomura and Sawao, Honda and Iwamoto, Yuji and Fansuri, Hamzah (2019) Removal of As(III) and As(V) from water using green, silica-based ceramic hollow fibre membranes via direct contact membrane distillation. RSC Advances, 9 (6). pp. 3367-3376. ISSN 2046-2069

Hubadillah, Siti Khadijah and Zhong, Sheng Tai and Othman, Mohd Hafiz Dzarfan and Harun, Zawati and Jamalludin, Mohd Riduan and A. Rahman, Mukhlis and Jaafar, Juhana and Ismail, Ahmad Fauzi (2019) Hydrophobic ceramic membrane for membrane distillation: A mini review on preparation, characterization, and applications. Separation and Purification Technology, 217. pp. 71-84. ISSN 1383-5866

Hui Ling, Chua and Huong, Audrey (2019) Intelligent imaging system for optimal night time driving. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 27-37. ISBN 978-967-2306-26-9

Husin, Wann Huzida Roza (2019) The influences of social media marketing on consumer purchase behaviour of low involvement product among generation y in sub-urban areas in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussain, Altaf (2019) Training and development, turnover intention and job performance of academic staff in public universities of Pakistan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hussein Abed, Abo Alwez Mustafa (2019) Modeling and simulation of standalone hybrid PV-wind renewable energy system base case study: Iraq. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Azmee (2019) Investigation of mould design and process parameter optimisation of plastic injection moulding for thin wall part. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Azmee (2019) Mekanisme pengurusan hutang dalam pembahagian harta pusaka orang-orang Islam di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Magaji Umar and Kasim, Narimah and Gidado, Umar (2019) Information technology: a tool for effective SME material management practices. International Journal of Innovative Research & Development, 8 (12). pp. 189-195. ISSN 2278 – 0211

Ibrahim, Mohammed (2019) Predictive model for self-reliance intention of Malaysian Polytechnic Students. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Rosziati and Muhammed Asri, Noor Athirah and Jamel, Sapiee (2019) The architecture of smart city in Malaysia by utilizing IOTs. In: 2019 IEEE 9th Conference on System Engineering and Technology (ICSET2019), 7th October 2019., Grand Blue Wave Hotel, Shah Alam, Malaysia.

Ibrahim, Zuraida (2019) Enhancement of social skills by using multimedia interactive social skills module application among students with autism spectrum disorder. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim Takai, Zakiyyu (2019) Synthesis and characterization of polyaniline/magnetite nanocomposites for fabrication of nanofiber textile. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Aisha (2019) Evaluation of the photoprotective role of quercetin to selected light-adapted and shade-tolerant plant species. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Nurul Shazwin (2019) Natural frequencies evaluation on existing reinforced concrete bridges using microtremor testing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ikhsan, Fatin Hamimah (2019) Dielectric measurement based microstrip transmission line. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isah, Abdulnasir and Phang, Chang (2019) New operational matrix of derivative for solving non-linear fractional differential equations via Genocchi polynomials. Journal of King Saud University – Science, 31 (1). pp. 1-7. ISSN 1018-3647

Ishak, I. A. and Mat Ali, Mohamed Sukri and Mohd Yakub, Mohamad Fitri and Shaikh Salim, Sheikh Ahmad Zaki (2019) Effect of crosswinds on aerodynamic characteristics around a generic train model. INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION, 7 (1). pp. 23-54. ISSN 2324-8386

Ishak, Nor Syuhada (2019) Tahap kompetensi pelajar kolej vokasional dalam melaksanakan kerja amali berpandukan domain psikomotor simpson. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishaq, Ishaq Muktar and Omar, Roshartini and Yahya, Mohd Yamani and Sarpin, Norliana (2019) Improving communication between client and contractor during construction project in Nigerian construction industry. Journal of Technology Management and Business, 6 (3). 060-075. ISSN 2289-7224

Ismail, Affero and Adnan, Wan Nurashida and Masek, Alias and Hassan, Razali and Hashim, Suhaizal and Ismail, Mohd Erfy (2019) Effectiveness of entrepreneurship programmes in developing entrepreneurship skills towards quality TVET graduates. Journal of Technical Education and Training, 11 (1). pp. 81-86. ISSN 2229-8932

Ismail, Affero and Kasman, Zeti and Sumarwati, Sri and Nur Yunus, Faizal Amin and Abd Samad, Noorazman (2019) The development of job competency for skilled technical worker towards green technology. International Journal of GEOMATE, 17 (59). pp. 216-221. ISSN 2186-2982

Ismail, Fadillah and Abdul Hamid, Nor Aziati and Abdul Kadir, Adibah and Raja Mohd Rasi, Raja Zuraidah and Alhosani, Adnan Ali Hassan Humaid (2019) Benefits to employers train & hire people with disabilities. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 39-50. ISBN 978-967-2306-02-3 50

Ismail, Fadillah and Abdul Kadir, Adibah and Mohd Rosli, Nur Amalina and Mohd Noor, Norasmiha (2019) Gig economy: the rise of freelancers & its impact on Human Resource (HR). In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 96-100. ISBN 978-967-2306-31-3

Ismail, Fadillah and Abdul Kadir, Adibah and Salleh, Siti Hasliah (2019) Prioritizing financial and mental wellness. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 101-110. ISBN 978-967-2306-31-3

Ismail, Fadillah and Chan, Shiau Wei and Maulad Bahrol, Khadijah and Abdullah, Mohd Fahmy (2019) Employment contract in Malaysia. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 1-12. ISBN 978-967-2306-02-3

Ismail, Fadillah and Humaid Alhosani, Adnan Ali Hassan and Chan, Shiau Wei and Nojumuddin, Nur Syereena (2019) Picket and demonstration in Malaysia. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 89-94. ISBN 978-967-2306-02-3

Ismail, Fadillah and Maulad Bahrol, Khadijah and Abdul Kadir, Adibah (2019) Cause and effect consequences of industrial dispute. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 95-103. ISBN 978-967-2306-02-3

Ismail, Fadillah and Nasuredin, Juzaimi and Humaid Alhosani, Adnan Ali Hassan and Maulad Bahrol, Khadijah and Nojumuddin, Nur Syereena (2019) Statistics of retirement age around the world. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 25-38. ISBN 978-967-2306-02-3

Ismail, Fadillah and Rashid, Umi Kartini and Ahmad, Zanariah and al Hosain, Adnan Ali Hassan and Mohd Rosli, Nur Amalina (2019) Talent management. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 11-24. ISBN 978-967-2306-31-3

Ismail, Fadillah and Ruslan, Rumaizah and Abdul Kadir, Adibah and Nasuredin, Juzaimi (2019) Women’s right to breastfeed in workplaces. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 13-24. ISBN 978-967-2306-02-3

Ismail, Fadillah and al Hosaini, Adnan Ali Hassan and Wei, Chan Shiau and Ruslan, Rumaizah and Maulad Bahrol, Khadijah (2019) Artificial intelligence (AI). In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 1-10. ISBN 978-967-2306-31-3

Ismail, Mohd Erfy and Hashim, Suhaizal and Hamzah, Norhasyimah and Abd Samad, Noorazman and Masran, Saiful Hadi and Mat Daud, Khairul Azhar and Mohd Amin, Nor Fadila and Samsudin, Mohd Ali and Kamarudin, Nur Zatul Shima (2019) Factors that influence students’ learning: an observation on vocational college students. Journal of Technical Education and Training, 11 (1). pp. 93-99. ISSN 2229-8932

Ismail, Mohd Erfy and Hashim, Suhaizal and Masek, Alias (2019) The assessment of 2D animation e-module suitability usage in Malaysia community college. International Journal of Innovation, Creativity and Change, 9 (6). pp. 196-206. ISSN 22011323

Ismail, Mohd Erfy and Zakaria, Anies Faziehan and Ismail, Irwan Mahazir and Othman, Hasyamuddin and Samsudin, Mohd Ali and Utami, Pipit (2019) Design and development of augmented reality teaching kit: in TVET learning context. International Journal of Engineering and Technology, 8 (1.1). pp. 129-134. ISSN 2227-524X

Ismail, Muhammad Arif and Rosly, Nurhayati (2019) Mechanical design study of drive mechanism of initial study of drag characteristics of the drogue parachute on leatjet 24D. Journal of Aviation and Aerospace Technology, 1 (1). pp. 1-6. ISSN 2682-7433

Ismail, Nurul Nabilah (2019) Sifat fizikal dan keupayaan mekanikal konkrit campuran abu kulit kupang (perna viridis) sebagai bahan tambah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Zool Hilmi and Jalaludin, Nor Anija (2019) Robust data assimilation in river flow and stage estimation based on multiple imputation particle filter. IEEE Access, 7.

J., Kavikumar and D., Nagarajan and Said, Broumi and F., Smarandache and M., Lathamaheswari and Ebas, Nur Ain (2019) Neutrosophic general finite automata. Neutrosophic Sets and Systems.

Ja'afar, Ishaq (2019) Blue ocean strategy on service quality in Islamic Banking Sector in Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Mohd Salleh, Salwani and Mohd Hamdan, Mohd Hazim and Cionita, Tezara and Rihayat, Teuku (2019) Important considerations in manufacturing of natural fiber composites: a review. International Journal of Precision Engineering and Manufacturing-Green Technology, 6. pp. 647-664. ISSN 2288-6206

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Tezara, Cionita and Mohamad Hamdan, Mohammad Hazim and Rihayat, Teuku (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105. pp. 3437-3450. ISSN 0268-3768

Jaafar, Jamiluddin and Siregar, Januar Parlaungan and Tezara, Cionita and Mohamad Hamdan, Mohammad Hazim and Rihayat, Teuku (2019) A review of important considerations in the compression molding process of short natural fiber composites. The International Journal of Advanced Manufacturing Technology, 105. pp. 3437-3450. ISSN 0268-3768

Jabbar, Balasem Abdulameer (2019) Experimental and simulation study of a diffuser augmented wind turbine to enhance the performance by modifying diffuser and rotor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jabbar Al-Quraishi, Balasem Abdulameer and Asmuin, Nor Zelawati and Nasir, Nurul Fitriah and Abdul Latif, Noradila and Taweekun, Juntakan and Mohd, Sofian and Mohammed, Akmal Nizam and Al-Wahid, Wisam A. Abd (2019) CFD investigation of empty flanged diffuser augmented wind turbine. The International Journal of Integrated Engineering, 11 (10). pp. 22-32. ISSN 2229-838X

Jaber, Ayad Jasim and Abd Balla, Hyder Hassan and Aboaltabooq, Mahdi Hatf Kadhum and Sapit, Azwan (2019) Experimental study of improving the efficiency of photovoltaic cells by using various angles of pneumatic routers. Journal of Green Engineering (JGE), 9 (4). pp. 608-625.

Jackson, Ronald (2019) Power sharing conditioning control in single-phase parallel distributed generations with simple improvement of droop control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaharudin, Siti Noraen (2019) The effectiveness of ‘secure and guard’ (SG) method and 14 protocol against illegal dumping of solid waste in Wilayah Persekutuan Kuala Lumpur (WPKL). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jainal Abidin, Nurul Aqilah (2019) Adaptive control for one-DOF finger rehabilitation robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jais, Noor Maisara (2019) Microalgae scenedesmus sp. Bioreactor for removal of nutrients and organic contents from wet market wastewater. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, A.J. and Mahmood, Salwa and Abdul Rashid, Azrin Hani and Nasir, S. H. and Ibrahim, S.A. and Ahmad, M.R. (2019) Extraction of eco-friendly natural dyes from Pina leaves and their application on wool fabrics. International Journal of Engineering & Technology, 7 (4.14). pp. 382-386. ISSN 2227-524X

Jamalludin, Mohd Riduan and Hubadillah, Siti Khadijah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Yunos, Muhamad Zaini (2019) Novel superhydrophobic and superoleophilic sugarcane green ceramic hollow fibre membrane as hybrid oil sorbent-separator of real oil and water mixture. Materials Letters, 240. pp. 136-139. ISSN 0167-577X

Jamaluddin, Nazrul Ikmal and Ahmad, Ida Laila (2019) Sensory nerve conduction system for measurement of nerve velocity across the carpal tunnel. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 63-71. ISBN 978-967-2306-26-9

Jamaludin, Khairul Azhar and Alias, Norlidah and DeWitt, Dorothy and Abdul Razzaq, Abdul Rasid (2019) Framework for technical communication skills content development for students in Malaysian Vocational Colleges: a fuzzy delphi study. Journal of Technical Education and Training, 11 (4). pp. 36-44. ISSN 2229-8932

Jamian, Saifulnizan and Watanabe, Yoshimi and Sato, Hisashi (2019) Formation of compositional gradient in Al/SiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods. Ceramics International, 45. pp. 9444-9453. ISSN 0272-8842

Jamian, Saifulnizan and Watanabe, Yoshimi and Satob, Hisashi (2019) Formation of compositional gradient in AlSiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods. CERAMICS INTERNATIONAL, 45 (7). pp. 9444-9453. ISSN 0272-8842

Jawher Al-Janabi, Omar Hameed (2019) Implementation of ACR and AVR controls for high voltage gain DC-DC Converter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jemali, Mohd Ali (2019) Kajian keperluan kecerdasan emosi guru pelatih program ijazah sarjana muda perguruan di Institut Pendidikan Guru Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jepri, Jepri (2019) Kerangka peningkatan kompetensi profesional guru sekolah dasar di Daerah Kepulauan Riau Indonesia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Johari, Ahmad Amni and Abd Wahab, Mohd Helmy and Mustapha, Aida (2019) Two-class classification: comparative experiments for chronic kidney disease. In: 2019 4th International Conference on Information Systems and Computer Networks (ISCON), 21-22 Nov. 2019, Mathura, India.

Jumma Alhosani, Jumaa Mohammed (2019) Creativity and innovation performance through employees’ empowerment in uae smart government. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

K. Ajeel, Raheem and W. Salim, W.S.-I and Hasnan, Khalid (2019) Influences of geometrical parameters on the heat transfer characteristics through symmetry trapezoidal-corrugated channel using SiO2-water nanofluid. International Communications in Heat and Mass Transfer, 101. pp. 1-9. ISSN 0735-1933

K. Ajeel, Raheem and Wan Salim, Wan Saiful-Islam and Hasnan, Khalid (2019) Influences of geometrical parameters on the heat transfer characteristics through symmetry trapezoidal-corrugated channel using SiO2-water nanofluid. International Communications in Heat and Mass Transfer, 101. pp. 1-9. ISSN 0735-1933

K. G., Tay and Muwafaq, Hassan and Ismail, Shuhaida and Ong, Pauline (2019) Electricity consumption forecasting using Nonlinear Autoregressive with External (Exogeneous) input neural network. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 26-36.

K.G., Tay and Muwafaq, Hassan and W. K., Tiong and Y. Y., Choy (2019) Electricity consumption forecasting using Adaptive Neuro-Fuzzy Inference System (ANFIS). Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 37-48. (Unpublished)

Kabir Aliyu, Mohammed (2019) Remediation of contaminated marine sediment using bentonite, kaolin and sand as capping materials. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kadir@Shahar, Hazila and Mizad, Meizareena and Md. Ngadiran, Nurizah (2019) Keberkesanan kursus pengucapan awam terhadap kemahiran insaniah pelajar. Jurnal Dunia Pendidikan, 1 (3). pp. 34-41. ISSN 2682-826X

Kafli, Nurliyana (2019) Water surface platform for internet-based environmental monitoring system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamaludin, Hazalila and Jamal, Muhamad Yusmaleef and Ab Rahman, Nurul Hidayah and Mohd Safar, Noor Zuraidin and Abd Ishak, Suhaimi (2019) Implementing virtual machine:a performance evaluation. In: International Conference on Soft Computing and Data Mining, 22-23 January, Langkawi, Malaysia.

Kamarudin, Khairu (2019) Evaluation on performance of square finned conformal cooling channel (sfccc) fabricated by selective laser melting (slm) on plastic moulded part. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Nora and Jumadi, Nur Anida (2019) Implementation of haar cascade classifier and eye aspect ratio for driver drowsiness detection using raspberry pi. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 67-75.

Kanasan, Nanthini (2019) Magnesium doped hydroxyapatite/sodium alginate biocomposite for bone implants application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kandasamy, Ramasamy and Adnan, Nur Atikah and Abbood, Jaafar Abdul Abbas and Kamarulzaki, Mohd and Rusiman, Mohd Saifullah (2019) Electric field strength on water based aluminum alloys nanofluids flow up a non-linear inclined sheet. ENGINEERING SCIENCE AND TECHNOLOGY, AN INTERNATIONAL JOURNAL, 22 (1). pp. 229-236. ISSN 2215-0986

Kanwal, Afshan (2019) Numerical solution of fractional partial differential equations by spectral methods. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kareem, A K and Fakhri, O M and Ismail, A E and Taib, Ishkrizat and Nemah, Mohammed Najeh (2019) Mechanisms and treatment of femoropoplitealin-stent restenosis. Test Engineering & Management, 81 (11-12). pp. 704-718. ISSN 0193-4120

Karim, Karim Jabur (2019) Internet of things security implementation using blockchain for wireless technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasiran, Mohd Amirul Naim (2019) Multilevel capacitor-clamped DC-DC boost converter structure with soft-switching technique implementation for high power density achievement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kassim, Muhammad Khairul Nizzam (2019) Mekanisme penentuan hak anak dalam perwarisan harta pusaka Islam di Wilayah Persekutuan Kuala Lumpur. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kavikumar, J. and S. P., Tiwari and A. H., Nor Shamsidah and Sharan, S. (2019) Restricted cascade and wreath products of fuzzy finite switchboard state machines. Iranian Journal of Fuzzy Systems, 16 (1). pp. 75-88. ISSN 17350654

Kavikumar, J. and S. P., Tiwari and Ebas, Nur Ain and A. H., Nor Shamsidah (2019) General fuzzy finite switchboard automata. New Mathematics and Natural Computation, 15 (2). pp. 283-305. ISSN 1793-0057

Kazeem, Abubakar and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz (2019) Effect of isothermal heat treatment on hardness of X7475 aluminium alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 55 (2). pp. 233-239. ISSN 2289-7879

Kek, Sie Long and Sim, Sy Yi and Chen, Chuei Yee (2019) An expanded optimal control policy for a coupled tanks system with random disturbance. Advances in Pure Mathematics, 9 (4). pp. 317-329. ISSN 2160-0368

Kek, Siok Yee (2019) The applicability of performance-based funding mechanisms in Malaysian Public Universities. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kemalok, Jai (2019) Flora dan fauna dalam mitos Suku Kaum Jakun, Kampung Peta, Mersing, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khairulzaman, Nurul Nasuha (2019) Influence of ag-doped on magnetic and electrical transport properties in Pr0.75Na0.25MnO3 manganites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khamis, S Z and Othman, M H and Hasan, S and Main, N M and Masrol, S R and Shaari, M F and Ibrahim, S N and Salim, S (2019) Multiple responses optimisation in injection moulding parameter for polypropylene-nanoclay-gigantochloa scortechinii via taguchi method. Journal of Physics: Conference Series, 1150. pp. 1-7. ISSN 1742-6588

Khamis, Senin (2019) Amalan pentaksiran untuk pembelajaran guru-guru sekolah kluster kecemerlangan sekolah rendah zon selatan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Ijaz (2019) Automated human age at death estimation system from long bones histology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Khan, Muhammad Asad (2019) The effects of employee satisfacton and performance appraisal on perceived job performance of academics in Khyber Pakhtunkhwa, Pakistan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Koh, Hie Ping (2019) Pembangunan modul pengintegrasian domain kognitif dan strategi pengajaran dalam kemahiran berfikir aras tinggi guru teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Koh, Wen Wen (2019) Adaptive chosen all inputs model for analyzing key derivation functions against bit-flip and timing side-channel attacks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kontagora, Ibrahim Umar (2019) An enhanced concept based approach medical information retrieval to address readability, vocabulary and presentation issues. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kshash, Abdullah Dawood (2019) Modelling and simulation of device to device based protocol for ultra-reliable low latency communication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ku Khalif, Ku Muhammad Naim and Abu Bakar, Ahmad Syafadhli and Gegov, Alexander and Aminuddin, Adam Shariff Adli and Mohd Safar, Noor Zuraidin (2019) A reliability based consistent fuzzy preference relations for risk assessment in oil and gas industry. In: 9th Int. Conf. on Geotechnique, Construction Materials and Environment, 20-22 November 2019, Tokyo, Japan.

Kupusamy, Kumanan and Nagapan, Sasitharan and Abdullah, Abd Halid and Kaliannan, Suaathi and Sohu, Samiullah and Subramaniam, Shivaraj and Maniam, Haritharan (2019) Construction waste estimation analysis in residential projects of Malaysia. Engineering, Technology and Applied Science Research, 9 (5). pp. 4842-4845. ISSN 2241-4487

Latif, Muhammad Sohail (2019) Antioxidant and anticholinesterase activities of centella asiatica phenolic extract-mediated gold nanoparticles. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Lee, Shee Yao and Abdul Wahab, Hanani (2019) Design a solar powered stirling engine prototype to produce electricity. Journal of Science and Engineering (JSE), 1 (1). pp. 36-43.

Lee, Sim Yee and Ahmad, Hilton (2019) XFEM modelling of single-lap Kenaf fibre composite hybrid joints under quasi-static loading. Plastics, Rubber and Composites, 48 (2). pp. 48-56. ISSN 1465-8011

Li, Xiaolong and Tong, Y.G. and Tang, S.K. and Lau, K.K. (2019) Empirical prediction of traffic noise transmission loss across plenum windows. Applied Acoustics, 151. pp. 45-54. ISSN 0003-682X

Loh, Jian Rong and Phang, Chang (2019) Numerical solution of fredholm fractional integro-differential equation with right-sided caputo’s derivative using bernoulli polynomials operational matrix of fractional derivative. Mediterranean Journal Of Mathematics, 16 (28). pp. 1-25. ISSN 1660-5446

Low, Ee Soong and Ong, Pauline and Cheah, Kah Chun (2019) Solving the optimal path planning of a mobile robot using improved Q-learning. Robotics and Autonomous Systems, 115. pp. 143-161. ISSN 0921-8890

M Elaswad, Ashraf Mahmood (2019) Solidification, microstructure and mechanical properties of mg-nd-gd-zn-zr cast magnesium alloy with yttrium, erbium and samarium additions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M Gismalla, M. S. and Abdullah, M. F. L. (2019) Optimization of received power and SNR for an indoor attocells network in visible light communication. Journal of Communications, 14 (1). pp. 64-69. ISSN 2374-4367

M Nasar, Norasikin and Abdul-Kahar, Rosmila and Amir Hamzah, Nor Shamsidah and Esa, Fahmiruddin Esa and Rodhuan, Mirza Basyir (2019) Effect in positioning gold nanoparticle inside Plasmonic Solar Cell on absorption, reflection and transmission. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 7-12.

M Shariff, M Riduan and Abdullah, M.F.L. and A Latiff, M Yusop and Hj. Mat Nor, Rosly (2019) Quantitative infrared thermography resolved leakage current problem in cathodic protection system. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.3). pp. 416-424. ISSN 2278-3091

M. A, Adi Syahid and Bujang, Nazarudin and Mustafa, Siti Aisyah and Amir Zal, W. A. (2019) Quality of life satisfaction among converted Kelantan Chinese Muslims. Asian Ethnicity, 21 (2). pp. 292-304. ISSN 1463-1369

M. A. Ataalah, Abdurezzag (2019) Development of new lean manufacturing approach through people development and process improvement as a mediator in the libyan companies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M. Azahar, N. and A. Hassan, N. and P. Jaya, R. and Hainin, M.R. and M. Yusoff, N.I. and M. Kamaruddin, N.H. and M. Yunus, N.Z. and A. Hassan, S. and Yaacob, H. (2019) Properties of cup lump rubber modified asphalt binder. Road Materials and Pavement Design, 22 (6). pp. 1329-1349. ISSN 1468-0629

M. Fayyadh, Mohammed and Roslan, R. and Kandasamy, R. and Ali, Inas R. (2019) MHD squeezing flow of nanoliquid on a porous stretched surface: numerical study. ARPN Journal of Engineering and Applied Sciences, 14 (20). pp. 3572-3584. ISSN 1819-6608

M. Gismalla, M. S. and Abdullah, Mohammad Faiz Liew (2019) Performance evaluation of optical attocells configuration in an indoor visible light communication. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 668-676. ISSN 2502-4752

M. Halmi, M. A. and Harimon, M. A. and Mohd Tobi, L. and Mahmod, M. F. (2019) Fatigue performance of thermal spray coatings on carbon steel: a review. International Journal of Mechanical Engineering and Technology (IJMET), 10 (3). pp. 1285-1300. ISSN 0976-6340

M. Hamdan, M. H. and Siregar, J. P. and M. Rejab, M. R. and Bachtiar, D. and Jamiluddin, J. and Tezara, C. (2019) Efect of maleated anhydride on mechanical properties of rice husk filler reinforced PLA Matrix Polymer Composite. International Journal of Precision Engineering and Manufacturing-Green Technology, 1 (1). ISSN 2288-6206

M. Hamdan, M. H. and Siregar, J. P. and Sapuan, S. M. and Tezara, C. and M. Hafizi, Z. and M. Rejab, M. R. and Bachtiar, D. and Jamiluddin, J. (2019) Vibration analysis of hybrid-reinforced unsaturated polyester composites. Unsaturated Polyester Resins. pp. 489-514.

M. Nasar, Norasikin and Abdul-Kahar, Rosmila and Amir Hamzah, Nor Shamsidah and Esa, Fahmiruddin and Rodhuan, Mirza Basyir (2019) Effect in positioning gold nanoparticle inside plasmonic solar cell on absorption, reflection and transmission. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 7-12.

M. Rus, Anika Zafiah and Abdullah, Nur Munirah (2019) Deterioration rate of renewable polyurethanes composites prior to ultra violet irradiation exposure. Composites Part B: Engineering, 172. pp. 750-759. ISSN 1359-8368

M. Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, M. F. L. (2019) Segmented phase of ultraviolet (UV) curable thermoset polyurethanes-graphite (TPU-G) composites. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (9S3). pp. 1490-1495. ISSN 2278-3075

M.A., Rabiatul Adawiyah and A.B., M. Hafiz and O., Saliza Azlina and J., Zolhafizi and W.M., Wan Nur Azrina and O., Shahrul Azmir (2019) The effect of cooling rate during multiple reflow soldering on intermetallic layer of Sn-4.0 Ag-0.5Cu/ENImAg. Materials Science and Engineering Technology, 50 (3). pp. 295-301. ISSN 0933-5137

MOhammed Alduais, Nayef Abdulwahab (2019) An efficient real-time data collection model for multivariate sensors in internet of things (IOT) applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Madar, Ahmad Rizal and Chew, Eng Sun and Hamid, Hashima (2019) Facilitating torrance test of creative thinking use in Malaysian TVET research: the initial step of inter-rater reliability determination. Journal of Technical Education and Training, 11 (1). pp. 100-108. ISSN 2229-8932

Madon, Rais Hanizam (2019) Development of new steam methane reforming mobile plant with micro-scale catalytic channels. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mahadi, Lina Farhana and Ibrahim, Nabilah and Zaluwi, Mohd Thariq and S.M Johan, Muhammad Haniff (2019) Performance evaluation on mitral valve motion feature tracking using Kanade-Lucas- Tomasi (KLT) algorithm based eigenvalue measurement. Advances in Electrical and Electronic Engineering: From Theory to Applications (Series 2), 2. pp. 1-10.

Mahadi, Lina Farhana and Ibrahim, Nabilah and Zaluwi, Mohd Thariq and S.M Johan, Muhammad Haniff (2019) Performance evaluation on mitral valve motion feature tracking using kanade-lucas-Tomasi (KLT) algorithm based eigenvalue measurement. AIP Conference Proceedings, 2173 (1). 020002-1. ISSN 0094-243X

Mahdi, Ammar Salah (2019) Performance of maximum power point tracking by using conventional and soft computing techniques during partial shading conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mainasara, Muhammad Murtala (2019) Documentation and evaluation of medicinal plants with potential for breast cancer therapy as used by Jakun Community of Kampung Peta, Mersing, Johor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Majid, Mahani (2019) Study of melissopalynological, physical and chemical properties, antioxidant and xanthine oxidase inhibition activity of heterotrigona itama honey in Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Malijan, M. H. and Sharif, J. M. and Abdullah, A. H. and Jamil, M. M. (2019) An enhanced segmentation technique for smokers RBC rouleax coin stacking. In: Sustainable and Integrated Engineering International Conference 2019 (SIE 2019), 8 – 9 December 2019, The Everly Hotel, Putrajaya.

Malik, Ahmed Dhahir (2019) Faulty sensor detection using data correlation of multivariant sensor reading in smart agriculture with IOT. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Maniam, Haritharan (2019) A comparative study of construction waste generation rate based on different construction methods used in construction projects in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansoor, Ibrahim Adeeb (2019) Modelling and simulation of wireless information and power exchange protocol with power splitting for energy sustainability in device-to-device communications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marimin, Nor Azimah (2019) Integration of hydraulic model (HEC-RAS) and geographical information system (GIS) in development flood evacuation center along Sembrong River sea. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Marwan, Hazlina and Ali, Azita (2019) Experts’ consensus to identify elements of career management competencies in Work-Based Learning (WBL) program using fuzzy delphi analysis. International Journal of Emerging Technologies in Learning, 14 (20). ISSN 1868-8799 (Unpublished)

Mat, Mohamad Nur Hidayat (2019) Geometry optimization of dry ice blasting nozzle for the noise reduction using experimental validation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Din, Azinuddin (2019) Domain Latihan Program TVET Bakal Pesara Angkatan Tentera Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mat Sharif, Zainon and Syed Abdullah, Syed Nurulakla and Rahim, Mohamad Zulafif and Othman, Mohd Syafiq (2019) Design of the goat/sheep holding cage slaughtering system (cage for animal slaughter): innovations and prospect. International Journal of Advanced Science and Technology, 28 (10). pp. 113-120. ISSN 2005-4238

Mat Wan, Lauren (2019) Acoustical characteristic of empty fruit bunch (EFB) fibre with influence of sodium hydroxide treatment time and decay lifespan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Yazid, Muhamad Razuhanafi and Shuai, Di and Abdul Rashid, Nurul Aisyah and Ambak, Kamarudin (2019) Travellers’ choice behaviour of bicycle sharing system: logit binary model method. In: Seminar Kebudayaan Indonesia-Malaysia.

Maulad Bahrol, Khadijah and Humaid Alhosani, Adnan Ali Hassan and Abdullah, Mohd Fahmy and Ismail, Fadillah (2019) Impact retrenchment of workers. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 69-80. ISBN 978-967-2306-02-3

Maulad Bahrol, Khadijah and Md Yusoff, Rosman and Md Amin, Noor Dina and Abdul Hamid, Mariam and Ismail, Fadillah (2019) Model of conflict management. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 49-62. ISBN 978-967-2306-31-3

Maulad Bahrol, Khadijah and Raja Mohd Rasi, Raja Zuraidah and Ismail, Fadillah and Tasmin, Rosmaini (2019) Important of prerequisites for successful collective bargaining. In: Industrial Relations. Penerbit Uthm, Uthm, pp. 51-60. ISBN 978-967-2306-02-3

Maulat Samsudin, Nur’Ain and Mohd Foozy, Cik Feresa and Alias, Nabilah and Shamala, Palaniappan and Othman, Nur Fadzilah and Wan Din, Wan Isni Sofiah (2019) Youtube spam detection framework using naïve bayes and logistic regression. Indonesian Journal of Electrical Engineering and Computer Science, 14 (3). pp. 1508-1517. ISSN 2502-4752

Mazenan, Puteri Natasya (2019) Utilization of coal bottom ash and fine coconut shell as partial sand replacement in concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mazlan, Nurul Hidayah (2019) Feature selection to enhance android malware detection using modified term frequency-inverse document frequency (MTF-IDF). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ma’allin, Usama Abdullahi (2019) Design a photovoltaic system based on maximum power point tracking under partial shading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Datar, Nurul Haziqah (2019) Assessment on the average participation versus bialek’s methods for transmission pricing methodologies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Isa, Siti Fazlina (2019) The effects of grass and rainfall pattern on the matric suction of acidic soil slopes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Jamien, Fahrulrazi (2019) Chemically activated carbon using peat soil for heavy metals adsorption in industrial wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Roslan, Aira Shazwani (2019) Hubungan faktor individu dan faktor persekitaran terhadap kemahiran teknikal di Institusi German Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Sahak, Adibah Aishah and Md Yunus, Melor and Abdul Rahman, Abdul Wafi and Harun, Hairuddin and Marwanti, Marwanti and Tukiran, Nor Anis Intan Aqiah (2019) The usage of mobile application to teach practical skills among catering students. Jurnal Pendidikan Teknologi dan Kejuruan, 25 (1). pp. 31-35. ISSN 0854-4735

Md Saleh, Shahidah (2019) Kajian kecacatan di Taman Putera Indah, Batu Pahat, Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Yunos, Jailani and Lai, Chee Sern and Hamdan, Hidayah (2019) Criteria for sustainable curriculum of TVET teacher education programme in Malaysia. Journal of Technical Education and Training, 11 (3). 049-054. ISSN 2289-8982

Md. Yasid, Nurul Farahwahida (2019) The characteristic of frequency response on winding faults and configurations of transformer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mei Ying, Ng and Ibrahim, Nabilah and Fairuz Norsidek, Nur Izza (2019) Measurement of body temperature and heart rate for the development of healthcare system using IOT platform. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 15-25. ISBN 978-967-2306-26-9

Mirus, Muhammad Farhan and Nasir, Nurul Fitriah and Taib, Ishkrizat and Hariri, Azian and Nordin, Normayati and Mat Isa, Norasikin (2019) A short review on biodiesel production and costing. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (2). pp. 146-156. ISSN 2289-7879

Mohamad, Habib Musa and Zainorabidin, Adnan and Azhari, Azura and Engku Ab Rahman, Engku Shahrulerizal (2019) Characterizing the effects of pore pressure reduction and voids using x-ray CT scan towards physical changes due to static loading. International Journal of Recent Technology and Engineering (IJRTE), 8 (4). pp. 7931-7939. ISSN 2277-3878

Mohamad, Siti Nur Ateeqa (2019) An assistive robotics control system based on speech semantic recognition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ali, Mohd Firdaus (2019) Pedestrians walking speed and psychological distance at bus terminal and shopping mall. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Husni, Nur Amirah (2019) Force control for one degree of freedom haptic device using PID Controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Ishak, Daing Noor Farhanah (2019) Study of low voltage electroporation technique on hela cell treated with neolamarckia cadamba extracts daing. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Jamatolail, Mohamed Fitri and Ambar, Radzi and Chew, Chang Choon and Abd Wahab, Mohd Helmy and Mohd, Mohd Norzali and Mhd Poad, Hazwaj and Abd Jamil, Muhammad Mahadi (2019) CREC: Camera-based mobile robot for elderly care. International Journal of Advanced Trends in Computer Science and Engineering, 8 (1.4). pp. 51-56. ISSN 2278-3091

Mohamad Noor, Noorsyafiqah (2019) Hubungan antara kecerdasan emosi dengan komitmen Guru Mata Pelajaran Teknik dan Vokasional di Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Sari, Nurshaidah (2019) Potensi pelajar dalam kegiatan kokurikulum di Kolej Vokasional, Sekolah Menengah Kebangsaan dan Sekolah Berasrama Penuh Negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Zailani, Laila Wahidah (2019) Keberkesanan elektro-penggumpalan (aluminum dan ferum) bersama penggumpal komposit(poli aluminum klorida dan tepung ubi kayu) bagi merawat larut lesapan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Taher, Mohammad Nasir (2019) Performance of advera® warm mix asphalt with reclaimed asphalt pavement materials. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Ali, Hasimah (2019) Persepsi pelajar terhadap pelaksanaan pembelajaran aktif melalui kaedah gamifikasi bagi mata pelajaran perniagaan tingkatan 4. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad Azizi, Mohammad Khairul Fadhli and Mohd Saleh, Siti Juita Mastura and Mohanad Al-Ghriybah, Mohanad Al-Ghriybah (2019) Optimization of bow and arrow design subject to aerodynamic characteristics. Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-7.

Mohammad Gunawan, Muhammad Faqih Muhsin (2019) Development of direct torque control with neural network for speed change in 3-phase induction motor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Amjad Muneim (2019) Development of D-Statcom in hardware in the loop system for voltage SAG mitigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Ammar Hatem (2019) A study of island network performance for streaming protocols. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Fadhali, Najib (2019) Integrated influential factors (iifs) model of internal stakeholders as an adaptive control system to curb projects completion delay in Yemen. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Gismalla, Mohammed Salih and Abdullah, Mohammad Faiz Liew (2019) Optimization of received power and SNR for an indoor attocells network in visible light communication. Journal of Communications, 14 (1). pp. 64-69.

Mohammed Mahdi, Ammar Abdo (2019) Development of a vehicle robotic driver with intelligent control system modelling for automated standard driving-cycle tests. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Usman, Abdullahi (2019) Development of carbon footprint quantification and reduction (cafquar) assessment tool for selected non-residential buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Khairulazhar (2019) Pembangunan koswer interaktif dengan pendekatan pembelajaran masteri bagi Mata Pelajaran Reka Bentuk Dan Teknologi Tingkatan 1. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Sofian and Rosly, Nurhayati and Basuno, Bambang and Mohd Fikri, Mohd Masrom and Abdul Ghafir, Mohammad Fahmi (2019) Performance testing of a proposed design energy installation system for vehicle’s wind turbine. Journal of Physics: Conference Series, 1150. pp. 1-9. ISSN 1742-6588

Mohd Ali, Nor Helmie Shahreen (2019) Housing demand prediction in Penang, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Apandi, Najeeha (2019) Phycoremediation of wet market wastewater using microalgae scenedesmus sp. For biomass production. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Apandi, Najeeha and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Mohd Kassim, Amir Hashim (2019) Microalgal biomass production through phycoremediation of fresh market wastewater and potential applications as aquaculture feeds. Environmental Science and Pollution Research (ESPR), 26. pp. 3226-3242. ISSN 0944-1344

Mohd Aris, Nor Afiqah and Jamaian, Siti Suhana and Mohd Sadiq, Ummal Aisha Farhana and Mustaffa, Nur Maisarah and Mohamed Sunar, Norshuhaila and Zulkifli, Fathul Hakim (2019) Effect of selective parameters values towards microalgae growth by an advanced hybrid mathematical model. Journal of Adv Research in Dynamical & Control Systems, 11 (12). pp. 1-12. ISSN 1943023X

Mohd Asry, Anis Maisarah and Mustafa, Farahiyah and Ishak, Maizul and Ahmad, Aznizam (2019) Power generation by using piezoelectric transducer with bending mechanism support. International Journal of Power Electronics and Drive System (IJPEDS), 10 (1). pp. 562-567. ISSN 2088-8694

Mohd Asry, Anis Maisarah and Mustafa, Farahiyah and Sim, Sy Yi and Ishak, Maizul and Ahmad, Aznizam (2019) Study on footstep power generation using piezoelectric tile. Indonesian Journal of Electrical Engineering and Computer Science, 15 (2). pp. 593-599. ISSN 2502-4752

Mohd Azaman, Nur 'Amirah (2019) Vibration test and parametric study of concrete flooring system towards human comfort. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Azhan, Mirsa Nurfarhan (2019) The impact of brillouin pump pre-amplification on multiwavelength brillouin-erbium fiber laser in linear cavity. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Dzulkifli, Syahrun Niezam (2019) Health risk effect of indoor air quality index at adaptive reused museum in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Faudzir, Najmuddin (2019) Feeding ecology, daily activity budget and primatourism of schlegel’s banded langur (presbytis neglectus) (schlegel,1876) in Kota Tinggi Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Haizan, Mohamad Azrul Azhad (2019) Identification of shift variation in bivariate process using pattern recognition technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Hasan, Mohd Rosli and You, Zhanping and Mohd Satar, Mohd Khairul Idham and Mohd Warid, Muhammad Naqiuddin and Mohd Kamaruddin, Nurul Hidayah and Poovaneshvaran, Sharvin (2019) Rheological and mechanical performance of asphalt binders and mixtures incorporating CaCO3 and LLDPE. Organic Polymer Material Research, 1 (1). pp. 10-21. ISSN 2164-5736

Mohd Joharudin, N.F. and Abdul Latif, N. and Mustapa, M.S. and Mansor, M.N. and Siswanto, W.A. and Murugesan, J. and Yusoff, F. (2019) Effect of amorphous silica by rice husk ash on physical properties and microstructures of recycled aluminium chip AA7075. Materials Science and Technology Engineering, 50 (3). pp. 283-288. ISSN 0933-5137

Mohd Kassim, Muhammad Asyraf and Abdul Manaf, Arman Hadi and Abdullah, Muhammad Safizal and Osman, Abdullah and Salahudin, Shahrul Nizam (2019) Conflict management styles and job satisfaction: a study among Malaysian public universities academicians. Asian Journal of Social Sciences & Humanities, 7 (4). pp. 11-21. ISSN 2186-8492

Mohd Nizam, Muhammad Syazaamirul and Rosly, Nurhayati (2019) The development of flight training operation for Tanjung Laboh airport. Journal of Aviation and Aerospace Technology, 1 (2). pp. 1-9. ISSN 2682-7433

Mohd Noor, Anas and Norali, Ahmad Nasrul and Zakaria, Zulkarnay and Mohd Noor, Aishah and Hashim, Hairulazwan (2019) Hydrodynamic impact to the cell stress during single cell recovery. Applications of Modelling and Simulation, 3 (3). pp. 168-172. ISSN 2600-8084

Mohd Nor, Norasmiha (2019) Relationship between lean system and small medium enterprises (SMES) performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Padzil, Siti Aisyah and Pillay, Khuneswari Gopal and Mohd Salleh, Rohayu and Avtar, Sya Sya and Khamis, Azme (2019) New model averaging on household income to examine poverty in Malaysia. Jour of Adv Research in Dynamical & Control Systems, 11 (12). pp. 137-144.

Mohd Padzil, Siti Aisyah and Pillay, Khuneswari Gopal and Mohd Salleh, Rohayu and Azme, Sya Sya Avtar (2019) New model averaging on household income to examine poverty in Malaysia. Jour of Adv Research in Dynamical & Control Systems, 11 (12). pp. 137-144.

Mohd Pu'ad‬, ‪Nor Atiqah Syafinaz and P., Koshy and Abdullah, ‪Hasan Zuhudi and Idris, ‪Maizlinda Izwana and ‪Lee, Te Chuan (2019) Syntheses of hydroxyapatite from natural sources. Heliyon, 5 (5). pp. 1-14. ISSN 2405-8440

Mohd Razib, Siti Nabilah (2019) Determination of space charge characteristics on contaminated XLPE insulator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Rosli, Nur Amalina and Abdul Kadir, Adibah and Wei, Chan Shiau and Ismail, Fadillah (2019) Impact of technology in human resource. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 81-92. ISBN 978-967-2306-31-3

Mohd Rosli, Nur Amalina and Ismail, Fadillah and Rashid, Umi Kartini and Salleh, Siti Hasliah and Kadir, Adibah Abdul (2019) Flexible work. In: Human Resource Management & Psychology. Penerbit Uthm, Uthm, pp. 71-80. ISBN 978-967-2306-31-3

Mohd Rusli, Najwa Wajihah (2019) Effects of kenaf/polyester blending ratios on physical and mechanical properties of yarns produced from ring spinning system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Kahirol and Sulaiman, Nor Lisa (2019) The impact of organizational and professional development on human resource development practitioners in Malaysian organizations. The Journal of Social Sciences Research, 5 (3). pp. 683-689. ISSN 2413-6670

Mohd Tajuddin, Syafik Akmal (2019) Effect of peat solidification on macronutrients in soils associated with palm oil plantation in peat area. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yazed, Muhammad Syukri (2019) A development of IoT based basal body temperature (BBT) device with ovulation and pregnancy prediction system using fuzzy logic method. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Yunos, Yusnorsyazana (2019) Strategi pengurusan fasiliti landskap ke arah Kampus Lestari di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yusoff, Ainul Husna (2019) System identification and pid control of toothbrush simulator system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zin, Ahmad Faizul (2019) Critical management practices in reducing construction project on-site waste. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohtar, Lilia Ellany and Halim, Lilia and Samsudin, Mohd. Ali and Ismail, Mohd Erfy (2019) Non-cognitive factors influencing science achievement in Malaysia and Japan: an analysis of TIMSS 2015. EURASIA Journal of Mathematics, Science and Technology Education, 15 (4). pp. 1-17. ISSN 1305-8223

Morsin, Marlia and Abdull Mutalib, Nur Fatimah Hani and Ab. Rahman, Munirah (2019) Fabrication methods of organic thin film transistor for volatile organic compounds gas sensor. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 41-56. ISBN 978-967-2306-25-2

Mu'min, Mu'min (2019) Gaya kepimpinan dan kompetensi pengetua untuk meningkatkan prestasi Sekolah Menengah Pertama Negeri (SMPN) di Kota Batam. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muallah, Nur Izzah (2019) The influence of organisational support, transactive memory system and information technology competencies for facilitating knowledge transfer in enterprise resource planning success. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muchtar, Farkhana and Al-Adhaileh, Mosleh and Mohd Nordin, Ili Najaa Aimi and Mohd Hanif, Asyikin Sasha and Singh, Pradeep Kumar and Zubair, Ajoze Abdulraheem and Saheed, Ajibade Lukuman (2019) Testbed on MANET (ToM): private testbed facility for MANET Experiment. International Conference on Futuristic Trends in Networks and Computing Technologies. pp. 129-145.

Mudjanarko, Sri Wiwoho and Supriyatno, Dadang and Prasetijo, Joewono and Mohd Masirin, Mohd Idrus and Wiwoho, Firdaus Pratama (2019) Panduan pembuatan web parkir. Narotama University Press. ISBN 978-602-6557-84-1

Muftah Shumani, Mohamed Mahmud (2019) Outage prediction modelling of terrestrial free space optics for tropical region. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Suhaimi (2019) Penerapan kemahiran berfikir aras tinggi dalam pengajaran pendidikan Islam berasaskan kaedah simulasi. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Damanhuri, Amir Abdullah and Hariri, Azian and Alkahari, Mohd Rizal and Md Fauadi, Muhammad Hafidz Fazli and Zainal Bakri, Zainal Bakri (2019) Indoor air concentration from selective laser sintering 3d printer using Virgin Polyamide Nylon (PA12) Powder: a pilot study. The International Journal of Integrated Engineering, 11 (5). pp. 140-169. ISSN 2229-838X

Muhammad Yazid, Muhammad Noor Afiq Witri and Badar Sharif, Asyraf Sharif and Che Sidik, Nor Azwadi and Hanipah, M. H. and Mohd Zawawi, Fazila and Abidin, Ummikalsom (2019) Effects of Staggered Array of Cubical Obstacles on Near- Ground Wind Environment and Air Quality. "Journal of Advanced Research in Fluid Mechanics and Thermal Sciences", 58 (2). pp. 261-274. ISSN 2289-7879

Muharam, Azlan (2019) Efficient architectures of heterogeneous fpga-gpu for 3-d medical image compression. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Suberi, Anis Azwani and Wan Zakaria, Wan Nurshazwani and Nazari, Ain and Tomari, Razali and Nik Fuad, Nik Farhan and Mohd, Mohd Norzali (2019) Comparative performance of filtering methods for reducing noise in ischemic posterior fossa CT Images. 4th International Conference on Computer Science and Computational Intelligence 2019, 157. pp. 55-63.

Muhd Suberi, Anis Azwani and Wan Zakaria, Wan Nurshazwani and Tomari, Razali and Nazari, Ain and Mohd, Mohd Norzali and Nik Fuad, Nik Farhan (2019) Deep transfer learning application for automated ischemic classification in posterior fossa CT images. International Journal of Advanced Computer Science and Applications, 10 (8). pp. 459-465. (In Press)

Muridan, Mazliana (2019) Integration of critical success factors from demand and supply sides to enhance micro financing framework for micro and small enterprises (mses) in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mushtaq, Muhammad Faheem (2019) Key schedule algorithm based on coordinate geometry of a three-dimensional hybrid cube. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Najwa (2019) Optimization processability of ss316l used natural hydroxyapatite from waste tilapia fish bones in metal injection molding. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Norrizal (2019) Combustion characteristics of a spark ignition engine operating with liquid lpg injection. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mustaza, M. S. A. and M. Ariff, M. A. and Ramli, Sofia Najwa (2019) An extensive review of energy storage system for the residential renewable energy system. Indonesian Journal of Electrical Engineering and Computer Science, 14 (2). pp. 2501-4752. ISSN 2502-4752

Muzarpar, Muhammad Syafiq (2019) Development and fabricatin of production mechanism for small and medium animal feed production plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.

NAGENTRAU, Muniandy and MOHD TOBI, Abdul Latif and Jamian, Saifulnizan and OTSUKA, Yuichi (2019) Contact slip prediction in HAp coated artificial hip implant using finite element analysis. Mechanical Engineering Journal, 6 (3). pp. 1-9. ISSN 2187- 9745

Nadarason, Kageishieny (2019) Relationship between construction waste generation and recycling practices in Southern Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nagarajan, D. and Lathamaheswari, M. and Broumi, Said and Kavikumar, J. (2019) A new perspective on traffic control management using triangular interval type-2 fuzzy sets and interval neutrosophic sets. Operations Research Perspectives, 6. pp. 1-13. ISSN 2214-7160

Nagarajan, D. and Lathamaheswari, M. and Kavikumar, J. and Deenadayalan, E. (2019) Interval type-2 fuzzy logic washing machine. International Journal of Fuzzy Logic and Intelligent Systems, 19 (4). pp. 223-233. ISSN 1598-2645

Nagentrau, M. and Mohd Tobi, A.L. and Sambu, M. and Jamian, S. (2019) The influence of welding condition on the microstructure of WC hardfacing coating on carbon steel substrate. International Journal of Refractory Metals and Hard Materials, 82. pp. 43-57. ISSN 0263-4368

Nasir, Khairani and Abdul Rashid, Azrin Hani and Abd. Razak, Nurul Atikah and Shaari, Muhammad Farid and Roslan, Mohd Nazrul and Shamsudin, Shazarel and Ansar, Mohd Shukri and Husain, Siti Nor Hawanis and Dzulkefli, Syafiqah and Marsi, Noraini (2019) The tensile performance of r-PET bottle string: effects of different string sizes and cutting axes. Universal Journal of Mechanical Engineering, 7 (6C). pp. 1-6. ISSN 2332-3353

Nasser Al-Ameri, Salem Mgammal Awadh (2019) Improvement of distribution transformer fault analysis using FRA method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nehadabed, Farook and Sapit, Azwan and Kariemshather, Saad (2019) An analysis of wire-cut parameters in electric-discharge of titanium alloys. International Journal of Mechanical and Production Engineering Research and Development (IJMPERD), 9 (4). pp. 1363-1370. ISSN 2249–6890

Nemah, Mohammed Najeh (2019) A hybrid haptic stimulation prosthetic wearable device to recover the missing sensation of the upper limb amputees. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ngah Nasaruddin, Nur Ain (2019) Model of leadership characteristics in addressing construction challenges. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nik Pa, Nik Nadia Amira (2019) The potentials of pennisetum purpureum ash as cement replacement material. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nistrina, Khilda (2019) The evaluation of information security of hospital information system (his) using cobit 5 framework: case study at Soreang Hospital, Indonesia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noor, Tahmina (2019) The relationship of social support and personality with work-family conflict among women employees in Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nordin, Noor Hafiza (2019) Pembangunan indeks keselesaan dalam koc tren. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nur Suhaila, Nur Suhaila and Huong, Audrey (2019) Diabetic foot plantar pressure monitoring system using force sensitive resistor system. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 73-85. ISBN 978-967-2306-26-9

Ogiemwonyi, Osarodion and Harun, Amran and Othman, Bestoon Abdulmaged and Ismael, Darbaz Anwer and Ali, Raman (2019) Key issues and challenges of green consumer in consuming green product an insight from the emerging country: Malaysia. International Journal of Psychosocial Rehabilitation, 23 (2). pp. 514-528. ISSN 1475-7192

Oh Lai Ching, Narong (2019) Hybrid optimisation electromagnetic interference shielding effectiveness:mechanical and physical performance of plaster mortar containing palm oil fuel ash using taguchi grey and taguchi-flower pollination algorithm methods. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Abdul Hakim (2019) Energy harvesting using ocean data acquisition system (ODAS) buoy for coral reef monitoring. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Mohamad Azizan (2019) Leachate treatment by using composite coagulant made from polyaluminium chloride (PAC) and tapioca starch (TS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Omar, Mohd Fairoz and Sulaiman, Erwan and Ahmad, Md. Zarafi (2019) Electromagnetic performances and main parameter sensitivity effect on unbalance magnetic flux in a New Single‑Phase FEFSM with segmental rotor. Journal of Electrical Engineering & Technology, 14 (6). pp. 2333-2340.

Omar, Mohd Fairoz and Sulaiman, Erwan and Ahmad, Md. Zarafi (2019) Electromagnetic performances and main parameter sensitivity effect on unbalance magnetic flux in a new single‑phase FEFSM with segmental rotor. Journal of Electrical Engineering & Technology, 14. pp. 2333-2340. ISSN 1975-0102

Omar Mumin, Abdul Rashid (2019) Performance characteristics on patch antenna with sar reduction using artificial magnetic conductor (amc) for wban applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Pauline and Ho, Choon Sin and Chin, Desmond Daniel Vui Sheng and Sia, Chee Kiong and Ng, Chuan Huat and Wahab, Md Saidin and Bala, Abduladim Salem (2019) Diameter prediction and optimization of hot extrusion-synthesized polypropylene filament using statistical and soft computing techniques. Journal of Intelligent Manufacturing, 30. pp. 1957-1972. ISSN 1572-8145

Ong, Pauline and Tieh, Tony Hieng Cai and Lai, Kee Huong and Lee, Woon Kiow and Ismon, Maznan (2019) Efficient gear fault feature selection based on moth‑flame optimisation in discrete wavelet packet analysis domain. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 41. pp. 1-14. ISSN 1678-5878

Ong, Pauline and Zainuddin, Zarita (2019) Optimizing wavelet neural networks using modified cuckoo search for multi-step ahead chaotic time series prediction. Applied Soft Computing Journal, 80. pp. 374-386. ISSN 1568-4946

Osman, Yusuf Hussein (2019) Factors affecting cost overrun at construction projects in Somalia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Bakhtiar Affandy and Marto, Aminaton and Mohd Yunus, Nor Zurairahetty and Tan, Choy Soon and Pakir, Faizal (2019) The grading effect of coarse sand on consolidated undrained strength behaviour of sand matrix soils. International Journal of Recent Technology and Engineering (IJRTE), 7 (5). pp. 88-92. ISSN 2277-3878

Othman, N. and Tay, K. G. and Pakarzadeh, H. and Cholan, N. A. and M. Shah, N. S. and Talib, R. (2019) Impact of random dispersion fluctuations on two-pump fiber optical parametric amplifier performances. Universal Journal of Electrical and Electronic Engineering, 6 (5H). pp. 13-16.

Othman, Nurulanati (2019) Impacts of higher-order dispersion coefficients and dispersion fluctuations on one-pump fiber optical parametric amplifier. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Paisal, Muhammad Sufyan Amir and Taib, Ishkrizat and Ismail, Al Emran and Tajul Arifin, Ahmad Mubarak (2019) Numerical analysis on the effect of normotensive and hypertensive physiological conditions onto hemodynamic characteristics in stented carotid artery. International Journal of Mechanical & Mechatronics Engineering IJMME, 19 (1). pp. 94-107. ISSN 2227-2771

Palpanadan, Sarala @ Thulasi and Abdul Kadir, Zulida and Ahmad, Iqbal and K. Ravana, Venosha (2019) An assessment instrument of product versus process writing instruction: a rasch measurement analysis. English Literature and Language Review, 5 (1). pp. 1-8. ISSN 2413-8827

Prathabrao, M. and Amin, S.Y.M. and Othman, M.H. and Shahbudin, S.N.A. (2019) Optimization of injection molding parameters for WC-TaC-6Co. International Journal of Engineering and Technology, 8 (1.1). pp. 1-5. ISSN 2227-524X

Puat, Nurul Azwa (2019) Kesediaan tenaga pengajar UTHM dalam melaksanakan Program 2u2i (2 tahun universiti, 2 tahun industri). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Punai Philimon, Sheena and Huong Kah Ching, Audrey and Ngu, Xavier (2019) Optical measurement of tissue perfusion in diabetic wound patients. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 1-14. ISBN 978-967-2306-26-9

Raad Ali, Rabei (2019) Reassembly and clustering bifragmented intertwined jpeg images using genetic algorithm and extreme learning machine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rady, Mohammed Hussien (2019) Fatigue life and mechanical behaviour of aluminium alloy aa6061 chips prepared by hot extrusion process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rafeek, Muhammad Akil and Firdaus Arbain, Adila and Sudarmilah, Endah (2019) Risk mitigation techniques in agile development processes. International Journal of Supply Chain Management, 8 (2). pp. 1123-1129. ISSN 2051-3771

Rahayu, Nurul Syahirah (2019) Pengawalan peralatan elektrik dan keselamatan di sekolah ke arah bercirikan revolusi industri 4.0. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raheem, Mustafa Sattar (2019) Development of compact dual-band monopole antenna for LTE application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahim, MKA and Hamid, MR and Samsuri, NA and Murad, NA and Zubir, F and Ayop, O and Yusof, MFM and Majid, HA (2019) Antenna with artificial magnetic conductor for wireless application. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25 - 27 November 2019, Malacca, Malaysia.

Rahman, Gohar and Chai, Chuah Wen and Shah, Sadiq and Daud, Misbah (2019) Minimizing information asymmetry interference using optimal channel assignment strategy in wireless mesh networks. International Journal of Advanced Computer Science and Applications, 10 (1). pp. 99-106. ISSN 2156-5570

Raja Ahmad, Raja Adibah and Harun, Zawati and Othman, Mohd Hafiz Dzarfan and Basri, Hatijah and Yunos, Muhamad Zaini and Ahmad, Azlinnorazia and Mohd Akhair, Siti Hajar and Abd Rashid, Abdul Qaiyyum and Azhar, Faiz Hafeez and Alias, Siti Salwa and Ainuddin, Ainun Rahmahwati (2019) Biosynthesis of zinc oxide nanoparticles by using fruits extracts of Ananas comosus and its antibacterial activity. Malaysian Journal of Fundamental and Applied Sciences, 15 (2). pp. 268-273. ISSN 2289-5981

Ramli, Afifah (2019) The effect of physical properties on flame spread behavior for various paper/bagasse composition. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramli, Roslinda Hani and Soon, Chin Fhong and Ahmad, Mohd Khairul and Nayan, Nafarizal and Mohd Rus, Anika Zafiah (2019) Synthesis and physical properties of chitosan/alginate/silver nanoparticles hydrogel scaffolds. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 131-147. ISBN 978-967-2306-25-2

Ramly, Edly Ferdin (2019) A diagnosis framework for selecting operational improvement opportunities for Malaysian industries. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ramzi Hannan, Nurul Izzati Raihan (2019) Acoustic and non-acoustic performance of coal bottom ash as sound absorptive material for reducing railway noise level. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rashid, Mehwish (2019) Servant leadership and organizational citizenship behavior, mediated by interpersonal employee conflict in Malaysian Universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Fakhriah (2019) Comparative study of nanorods and nanoflowers TiO2 thin film for heterostructure application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali, Nasrullah and Ong, Pauline and Ibrahim, Mazlan and Wan Daud, Wan Rosli and Zainuddin, Zarita (2019) Modeling of acetosolv pulping of oil palm fronds using response surface methodology and wavelet neural networks. Cellulose, 26. pp. 4615-4628. ISSN 0969-0239

Razali, Sufia Aqilah (2019) Structural, electro-magnetic and electrical analysis in monovalent doped Nd0.75Na0.25-xKxMnO3 manganites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Razali., S. S and Ismail., A (2019) The element of fine art context in multimedia element in teaching and learning material towards motivation to learn. International Journal of Engineering and Advanced Technology (IJEAT), 8 (6S3). pp. 452-455. ISSN 2249 – 8958

Romai Noor, Mohd Kamil (2019) Single-switch bridgeless PFC sepic with proposed series-line-diodes-clamped configuration for data communication applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Roslan, Muhammad Faris (2019) IOT-based solution towards real-time monitoring system for high jump spot. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosli, Muhammad Mujahid (2019) Kesedaran kognitif dalam aplikasi reka bentuk antara muka bagi pemantauan penyelenggaraan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosly, Nurhayati and Mohd, Sofian and Husain, Mohd Hazruwadi and Omar, Zamri and Subari, Zulkhairi and Yunos, Muhamad Zaini (2019) Design proposal of the energy installation system for vehicle’s wind turbine. Journal of Physics: Conference Series, 1150. pp. 1-11. ISSN 1742-6588

Roza Husin, Wann Huzida and Harun, Amran (2019) Social media marketing amongst millennial’s in Malaysia: issues and challenges. Journal of Social Transformation and Regional Development, 1 (2). pp. 1-7. ISSN 26829142

S., Broumi and D., Nagarajan and A., Bakali and M., Talea and F., Smarandache and M., Lathamaheswari and J., Kavikumar (2019) Implementation of neutrosophic function memberships using MATLAB program. Neutrosophic Sets and Systems, 27. pp. 44-52. ISSN 23316055

Saat, Abdullah Fauzi and Rosly, Nurhayati (2019) Aerodynamic analysis of vertical axis wind turbine. Journal of Aviation and Aerospace Technology, 1 (1). pp. 1-6. ISSN 2682-7433

Sabeeh, Saad Raad (2019) Parameter study of boost inverter topologies for high voltage gain. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabri, Ainaa Mardhiah (2019) Parameter analysis of copper-nickel-tungsten prepared via powder metallurgy process for electrical discharge machining of polycrystalline diamond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sadun, Amirul Syafiq and Jalani, Jamaludin and Nasir, Siti Hana and Roslan, Mohd Nazrul and Hashim, Hairulazwan and Mohd Anuar, Syazwani (2019) Development of two-fingered underactuated robot gripper using 3D printer. IOP Conference Series: Materials Science and Engineering, 637.

Saeed, Hussein Ali (2019) Development of safety health monitoring device to prevent and control risk in confined space. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sahdan, Shafizza (2019) Kesan penggunaan prosedur pembelajaran kawalan kendiri (self-regulated learning) terhadap pencapaian akademik, kemahiran meta kognitif dan motivasi pelajar politeknik : kajian kes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saim, Raudhah (2019) Design, manufacturing and testing of parachute recovery system for aludra SR-10 unmanned aerial vehicle (UAV). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sainudin, Muhammad Shabery (2019) Kesan abu kulit kupang (perna viridis) sebagai bahan tambah di dalam konkrit terhadap pengawetan larutan sodium klorida. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saion, Rasidayanty (2019) Kerangka kemahiran berfikir kritis dalam proses pengajaran dan pembelajaran mata pelajaran reka bentuk dan teknologi. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Salahudin, Shahrul Nizam and Ramli, Hani Suhaila and Alwi, Mohd Nur Ruzainy and Abdullah, Muhammad Safizal and Abdul Rani, Nasir (2019) Employee engagement and turnover intention among Islamic Bankers in Brunei Darussala. International Journal of Recent Technology and Engineering (IJRTE), 8 (2S). pp. 643-651. ISSN 2277-3878

Saleh, Nor Shela and Yaacob, Hashim Fauzy and Rosli, Mohd Shafie and Abu Bakar, Thuaibah and Md. Ali, Azlah (2019) The Influence on the Competency of Doctors in Medical Learning. Journal of Social Transformation and Regional Development, 1 (2). pp. 40-51.

Saleh, Nor Shela and Yaacob, Hashim Fauzy and Rosli, Mohd Shafie and Abu Bakar, Thuaibah and Md. Ali, Azlah (2019) Pengaruh kompetensi doktor pelatih terhadap pembelajaran perubatan. Journal of Social Transformation and Regional Development, 1 (2). pp. 40-51.

Saleh, Suhairie (2019) Stable multiwavelength erbium-doped random fiber laser. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salihu, Ibrahim-Anka and Ibrahim, Rosziati and S. Ahmed, Bestoun and Zamli, Kamal Z. and Usman, Asmau (2019) AMOGA: A static-dynamic model generation strategy for mobile apps testing. IEEE Access, 7. pp. 17158-17173. ISSN 2169-3536

Salim, Safyzan (2019) Biosignal acquisition and interfacing technique for post stroke rehabilitation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Siti Hajar and Mazlan, Saiful Amri and Salim, Siti Aisyah (2019) Preliminary study on decision making factors to replace medical equipment in hospital. Journal of Social Transformation and Regional Development, 1 (1). pp. 12-17.

Samatar, Abdullahi Mohamed (2019) Design and economic analysis of solar home system for urban areas of Mogadishu using homer software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Samsudin, Mohd Ali and Nordin, Norfarah and Syazwani, Ilya and Ismail, Mohd Erfy (2019) The effect of computerized-adaptive test on reducing anxiety towards math test for polytechnic students. Journal of Technical Education and Training, 11 (4). pp. 27-35. ISSN 2229-8932

Santoso, Teguh Iman (2019) Kerangka kompetensi “k-workers” industri di Batam. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sapaat, Arney and Mohamed, Maryati and Dalimin, Mohd Noh (2019) Gauging the current status of natural history collections in Malaysia. In: International Conference on Biodiversity 2018, 14-29 November 2018, Sharm el-Sheikh, South Sinai, Egypt.

Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohmad Ja'at, Md Norrizam and Samsubaha, Muhammad Fauzi and Tuan A Talib, Tuan Mohamad Kamarul Hisyam (2019) Effect of acoustic excitation toward jet flame: an experimental design. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 53 (1). pp. 69-74. ISSN 2289-7879

Sarani, Noor Amira (2019) Physical, mechanical and environmental properties of fired clay bricks incorporated with palm oil mill waste. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saravanan, S. S. and Majid, H. A. and Esmail, B.A.F and Fadhali, N. and Abidin, Z.Z. and Shah, S.M. and Rahim, M.K.A. (2019) Multiband monopole antenna for mobile applications. In: 2019 IEEE Asia-Pacific Conference on Applied Electromagnetics (APACE), 25-27 November 2019, Melaka, Malaysia.

Sarif, Nira Mawangi and Ngadengon, Rafidah and Abdul Kadir, Herdawatie and A. Jalil, Mohd Hafiz (2019) Depth control of autonomous underwater vehicle using discrete time sliding mode controller. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 96-102.

Sazali, N. and W. Salleh, W. N. and Arsat, N. and Harun, Z. and Kadirgama, K. (2019) P84 co-polyimide-based tubular carbon membrane: effect of pyrolysis temperature. J. Applied Membrane Science & Technology, 23 (1). pp. 17-24. ISSN 1823-366X

Shaath, M. L. M. and Ansar, M. N. M. and A., Atiqah and Hamdan, A. (2019) Tensile properties of Poly Lactic Acid (PLA)–Tungsten Trioxide (WO3) nano composites for 3D printing process. International Journal of Engineering and Advanced Technology (IJEAT), 9 (1). pp. 2511-2513. ISSN 2249 – 8958

Shafi, Muhammad Ammar and Rusiman, Mohd Saifullah and Ismail, Shuhaida and Kamardan, Muhamad Ghazali (2019) A hybrid of multiple linear regression clustering model with support vector machine for colorectal cancer tumor size prediction. International Journal of Advanced Computer Science and Applications, 10 (4). pp. 323-328. ISSN 2158-107X

Shafiq, Muhammad Shafiq (2019) Blue ocean strategy and innovation performance, mediated by innovation strategies. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shah, S. M. and Hamdan, K. and Z. Abidin, Z. and C. Seman, F. and Hamzah, S. A. and Katiran, N. and Zubir, F. (2019) Frequency tuning varactor-loaded reconfigurable antenna for m-WiMAX and WLAN applications. Indonesian Journal of Electrical Engineering and Computer Science, 13 (2). pp. 779-786. ISSN 2502-4752

Shahbaz, Muhammad Saeed (2019) The role of risks, collaboration and performance in the supply chain of manufacturing firms of Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sharif, Wareesa (2019) Improved relative discriminative criterion using rare and informative terms and ringed seal search-support vector machine techniques for text classification. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sherwani, Fahad (2019) An improved data classification framework based on fractional particle swarm optimization. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sies, M.F. and Hakim, M. Zikril and Pairan, M. Rasidi and Madlan, M.A. and Asmuin, N. and Zakaria, H. (2019) An investigational research of spray pattern for deflector flat spray nozzle using horizontal patternator. Test Engineering and Management, 81. pp. 733-740. ISSN 0193-4120

Siregar, Januar Parlaungan and Jaafar, Jamiluddin and Cionita, Tezara and Choo, Chee Jie and Bachtiar, Dandi and Mat Rejab, Mohd. Ruzaimi and Asmara, Yuli Panca (2019) The efect of maleic anhydride polyethylene on mechanical properties of pineapple leaf fibre reinforced polylactic acid composites. International Journal of Precision Engineering and Manufacturing-Green Technology. ISSN 2288-6206

Sivapathy, Kanthaan (2019) Study and analysis of surface charge collection and emission spectrum of plasma ashing process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soh, Hui Gian and Kasim, Shahreen and Hassan, Rohayanti and Zakaria, Zalmiyah and Mahdin, Hairulnizam and Ramli, Azizul Azhar and Md Fudzee, Mohd Farhan and Salamat, Mohamad Aizi (2019) Online activity duration management system for manufacturing company. Acta Electronica Malaysia (AEM), 3 (2). pp. 1-8. ISSN 2590-4043

Soomro, Dur Muhammad and Tawafan, Adnan Hasan and Jabbar, Feryal Ibrahim (2019) Methods in single phase to ground faults on power distribution systems. Journal of Engineering and Applied Sciences, 14 (7). pp. 10058-10066. ISSN 1816-949X

Soon, Chin Fhong and Sundra, Sargunan and Zainal, Nurfarina and Tee, Kian Sek and Ahmad, Mohd Khairul and Wan Omar, Wan Ibtisam and Nayan, Nafarizal (2019) Micromixers and applications. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 79-100. ISBN 978-967-2306-25-2

Sri Sumarti, Sri Sumarti (2019) Pembangunan kerangka transferable skills bagi perlaksanaan penyelidikan dalam kalangan pelajar pascasiswazah di Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Su, Stephanie See Weng and Kek, Sie Long and Abdullah, Mohd Asrul Affendi (2019) Using historical return data in the black-litterman model for optimal portfolio decision. Journal of Science and Technology, 11 (2). pp. 17-25. ISSN 2229-8460

Sufa, Mila Faila and Ishak, Nazrul Iszhar and Rahim, M. Zulafif and Ibrahim, Mohd Rasidi (2019) Analysis of worker performances using statistical process control in fish paste otak-otak food industries. International Journal of Emerging Trends in Engineering Research, 7 (11). pp. 685-689. ISSN 2347 - 3983

Sulaiman, Dr. Noralfishah and Wei, She Teo and Fernando, Prof. Terrence (2019) Community resilience frameworks for building disaster resilient community in Malaysia. Planning Malaysia Journal, 17 (1). ISSN 1675-6215

Sulaiman, Junita (2019) Pembangunan model dalam menentukan profesionalisme dalam profesion perguruan teknikal dan vokasional. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Suliman, Idawati (2019) Penggunaan Frog-Vle dalam pembelajaran dan pemudahcaraan di sekolah : perbandingan antara sekolah rendah bandar dan luar bandar Daerah Kluang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suliman, Mustafa Musa (2019) Development of power factor correction using boost converter circuit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sumarwati, Sri and Fitriyani, Harina and Setiaji, Fathin Muhammad Azhar and Amiruddin, Mohd Hasril and Jalil, Siti Afiat (2019) Developing mathematics learning media based on e-learning using moodle on geometry subject to improve students' higher order thinking skills. In: ASIA International Conference AIC-2019, 6-8 December 2019, KLCC, Malaysia.

Supar, Khairi and Ahmad, Hilton and M. Yussof, Mustafasanie (2019) XFEM modelling in multi-bolted joints using a unified bolt preload. Latin American Journal of Solids and Structures, 16 (1). pp. 1-10. ISSN 1679-7817

Sze, En Sim and Kim, Gaik Tay and Huong, Audrey and Wei, King Tiong (2019) Forecasting electricity consumption using SARIMA method in IBM SPSS software. Universal Journal of Electrical and Electronic Engineering, 6 (5B). pp. 103-114.

Sze, Qi Chan and Aman, Fazlina and Mansur, Syahira (2019) Bionanofluid flow through a moving surface adapting convective boundary condition: sensitivity analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 54 (1). pp. 57-69. ISSN 2289-7879

T Azmi, Tengku Norsuhaila (2019) A new approach for jpeg fragmentation point detection using sequential difference by segment (SDbS). Masters thesis, Universiti Tun Hussein Onn Malaysia.

T., Norfauzi and A. B., Hadzley and U. A. A., Azlan and A. A., Afuzaa and M. M., Faiz and M. F., Naim (2019) Fabrication and machining performance of ceramic cutting tool based on the Al2O3-ZrO2-Cr2O3 compositions. JMR&T, 8 (6). pp. 5114-5123.

T., Norfauzi and A. B., Hadzley and U. A. A., Azlan and M. M., Faiz and M. F., Naim and A. A., Aziz (2019) Comparison machining performance of Al2 O3 , ZTA and ZTA doped Cr2 O3 cutting tools on AISI 1045. Materials Research Express, 6 (1). pp. 1-18.

Tahan, Muliana and Nayan, Nafarizal and Bakri, Anis Suhaili and Rizan, Elfa Rizon (2019) Light emitting diode (led) chip fabrication using low temperature processes. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 149-163. ISBN 978-967-2306-25-2

Tajul Ariffin, Syazwana (2019) Relationship of economies of scale (EOS) factors for Malaysian Industrialised building system (IBS) precast manufacturer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Takai, Zakiyyu I. and Mustafa, Mohd K. and Asman, Saliza and A. Sekak, Khairunnadim (2019) Preparation and characterization of magnetite (Fe3O4) nanoparticles By Sol-Gel method. International Journal of Nanoelectronics and Materials, 12 (1). pp. 37-46. ISSN 2232-1535

Talib, Norfazillah and Abdul Sani, Amiril Sahab and Hamzah, Nur Adlisham (2019) Modified Jatropha nano-lubricant as metalworking fluid for machining process. Jurnal Tribologi, 23 (1). pp. 90-96. ISSN 2289-7232

Tapri, Hidayah (2019) An improved perturbation and observation in MPPT control using buck-boost converter in solar panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tatang, Mulyana and Ibrahim, Rasidi and Abd Rahim, Erween (2019) Human machine interface design analysis of defect detection prototype by wonderware intouch software. Journal of Physics: Conference Series, 1150 (1). pp. 1-7. ISSN 1742-6588

Taufek, Thoufeili (2019) Evaluation of hydroxyapatite (HA) from waste eggshell strengthened with ultra high molecular weight polyethylene (UHMWPE) by using injection molding process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Teng, Mee Ling and Kasim, Shahreen and Saedudin, Rd Rohmat (2019) Path apps for box of ramadhan. International Journal of Advanced Computing Science And Engineering, 1 (2). pp. 114-122. ISSN 2714 - 7533

Teuku Rihayat, Teuku Rihayat and Suryani, Suryani and Siregar, Januar Parlaungan and Satriananda, Satriananda and Yunus, M. M. and Sariadi, Sariadi and Fitria, Fitria and Shafira Riskina, Shafira Riskina and Zuhra Amalia, Zuhra Amalia and Syahputra, Wildan and Nurhanifa, Nurhanifa and Safari, Safari and Nurul fitriah, Nurul fitriah and Mardani, Mardani and Jaafar, Jamiluddin (2019) Synthesis and characterization of North Aceh CEC bentonite determination with methylene blue method and increased D- Spacing after addition of surfactants CTAB-SDS. In: 1st South Aceh International Conference on Engineering and Technology, Indonesia 8 – 9 December 2018, Kabupaten Aceh Selatan.

Teuku Rihayat, Teuku Rihayat and Suryani, Suryani and Siregar, Januar Parlaungan and Zaimahwati, Zaimahwati and Salmyah, Salmyah and Helmi, Helmi and Sariadi, Sariadi and Fitria, Fitria and Satriananda, Satriananda and Alfian Putra, Alfian Putra and Zahra Fona, Zahra Fona and Juanda, Juanda and Raudah, Raudah and Mawaddah, Mawaddah and Nurhanifa, Nurhanifa and Shafira Riskina, Shafira Riskina and Syahputra, Wildan and Jaafar, Jamiluddin (2019) Wound dressing based on banana peels waste and chitosan by strengthening lignin as wound healing medicine. In: 1st South Aceh International Conference on Engineering and Technology, 8 – 9 December 2018, Kabupaten Aceh Selatan, Indonesia.

Tey, Jia Sin (2019) Enhancing the evaluation process of sustainability related criteria in Malaysia landfill site selection. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tilabi, Sara and Tasmin, Rosmaini and Takala, Josu and Muazu, M.H. and A.H., Nor Aziati and Shafiee, A.R. and Kaprawi, Noraini and Che Rusuli, M.S. (2019) Assessment of technology factor in companies’ business strategy with the use of sense and respond method. Management and Production Engineering Review, 10 (3). pp. 81-89. ISSN 20808208

Tukimon, Mohd Faizal and Wan Muhammad, Wan Nur Azrina and Mohamad, Md Nor Anuar and Rosly, Nurhayati and Mat Isa, Norasikin (2019) Thermal analysis of quaternary molten nitrate salts mixture for energy recovery system. Key Engineering Materials, 796. pp. 74-79. ISSN 1662-9795

Ur Rehman, Fazal (2019) Factors influencing buying behavior of fashion clothing brands in Johor and Wilayah Persekutuan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ur Rehman, Zahoor (2019) Factors influencing the adoption of mobile banking among generation Y in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Usman, Nura (2019) Performance of recycled polymeric fiber as reinforcement in bituminous mixture for road maintenance works. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Utomo, Hadi Prasetyo and Bon, Abdul Talib and Hendayun, Mokhamad (2019) SAMR as a framework for modeling of Academic Information System in higher education institution toward education 3.0. International Journal of Innovative Technology and Exploring Engineering (IJITEE), 8 (11S2). pp. 283-287. ISSN 2278-3075

Wahyu Cahyani, Niken Dwi and Kim-Kwang, Raymond Choo and Ab Rahman, Nurul Hidayah and Ashman, Helen (2019) An evidence-based forensic taxonomy of windows phone dating apps. Journal of Forensic Sciences, 64 (1). pp. 243-253. ISSN 0022-1198

Wan Jusoh, Wan Amizah (2019) Properties and performance of high strength fibre reinforced concrete by using steel and polypropylene fibres. Doctoral thesis, Universiti Teknologi Malaysia.

Wan Kairuddin, Wan Nur Hafsh and Wan Mahmud, Wan Mahani Hafizah and Nazari, Ain (2019) Speckle filtering techniques for different quality level of healthy kidney ultrasound images. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 107-122. ISBN 978-967-2306-26-9

Wan Marzuki Rashidi, Wan Nur Ain Syukriah and Muhammad, Norhayati and Sairi, Nur Halimah and Abdul Rahim, Nur Fazira and A. Talip, Balkis and Abdullah, Norazlin and Abu Bakar, Mohd Fadzelly (2019) Phytochemical analysis and in-vitro antiurolithiatic properties of selected Malaysian herbs. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 64 (1). pp. 152-159. ISSN 2289-7879

Wan Zaki, Wan Suhaimizan and Correia, Ricardo and Korposh, Serhiy and Hayes-Gill, Barrie R. and P. Morgan, Stephen (2019) Development of tubular cardiovascular phantom system for pulse transit time simulation. International Journal of Recent Technology and Engineering (IJRTE), 8 (252). pp. 291-296. ISSN 2277-3878

Wibowo, Kusnanto Mukti and Talib, Azman and Che Ani, Norhidayah and Ahmad, Norazlina and Muslihati, Atqiya and Mohd Rosni, Nurliyana (2019) A review of graphene materials-based sensors. In: Current Advances in Microdevices and Nanotechnology. Penerbit Uthm, Uthm, pp. 101-130. ISBN 978-967-2306-25-2

Yaakob, Maizatul Azrina and Radin Mohamed, Radin Maya Saphira and Al-Gheethi, Adel and Tiey, Athirah and Mohd Kassim, Amir Hashim (2019) Optimising of Scenedesmus sp. biomass production in chicken slaughterhouse wastewater using response surface methodology and potential utilisation as fish feeds. Environmental Science and Pollution Research (ESPR), 26 (12). pp. 12089-12108. ISSN 0944-1344

Yaakub, Mohd Fauzi (2019) Aerodynamic analysis of groove based vortex trap configuration on the retreating helicopter blade. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yahaya, Muhammad Hazziq and Mustafa, Mohamad Zaid and Ahad, Rosnee (2019) The effectiveness of programmable logic controller teaching aids for control system module in vocational college. Universal Journal of Educational Research, 7 (12A). pp. 51-59. ISSN 2332-3205

Yahya Al-Tawil, Yahya Mohsen (2019) In-success factor for project management in high-rise building project. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yang Lim, Xiang and Gaik Tay, Kim and Huong, Audrey (2019) Breast tumor diagnosis in digital mammograms. In: Bioengineering Principle and Technology Applications. Penerbit Uthm, Uthm, pp. 123-137. ISBN 978-967-2306-26-9

Yatim, Mohd Hafizie (2019) Symmetric and asymmetric multilevel inverter topologies with reduced number of switching devices structure for high power density achievement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yee, M. H. and Mohamad, N. A. and Ahmad Zubir, R. A. and Kok, B. C. and Tee, T. K. (2019) Polytechnic student’s readiness towards project based employment. International Journal of Engineering and Advanced Technology (IJEAT), 9 (2). pp. 4281-4286. ISSN 2249 – 8958

Yusoff, Muhammad Hazri (2019) Pembangunan control system trainer sebagai alat bahan bantu mengajar (ABBM) bagi kursus control system di Kolej Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusuf, Nuhu and Mohd Yunus, Mohd Amin and Wahid, Norfaradilla (2019) Query expansion based on explicit-relevant feedback and synonyms for english quran translation information retrieval. International Journal of Advanced Computer Science and Applications, 10 (5). pp. 227-234. ISSN 2158-107X

Z Abidin, Munira and Kourmentza, Constantina and K Karatzas, Andreas and Niranjan, Keshavan (2019) Enzymatic hydrolysis of thermally pre-treated chitin and antimicrobial activity of N,N′-diacetylchitobiose. Journal of Chemical Technology and Biotechnology, 94 (8). pp. 2529-2536. ISSN 0268-2575

Zaidan, Ahmed Naji (2019) Real time power control strategy for output power for single phase inverter-linear load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal, Masturah (2019) Pembelajaran berasaskan aplikasi android menggunakan kaedah permainan bagi kursus asas grafik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Noor Atikah (2019) Model konsep integriti ke arah peningkatan kualiti penilaian rakan (peer assessment). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Norul Ernida (2019) Structural behaviour of circular concrete filled steel tube column fill with selfcompacting concrete incorporating coal bottom ash as fine aggregate replacement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zainudin, Nur 'Aifaa (2019) Missing tags detection algorithm for radio frequency identification (RFID) data stream. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Hanis (2019) Analysis of rbd palm olein abrasive blasting as new metal surface cleaning method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Mohd Zulhusni (2019) Serangga akuatik sebagai indikator kualiti air di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifli, Abd Fathul Hakim (2019) Diesel-cng dual fuel combustion characterization using vibro-acoustic analysis and response surface methodology. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

This list was generated on Fri Aug 12 22:46:27 2022 +08.