Items where Subject is "T Technology > TJ Mechanical engineering and machinery"
Up a level |
- Library of Congress Subject Areas (715)
- T Technology (715)
- TJ Mechanical engineering and machinery (715)
- T Technology (715)
Bulletin
Manshoor, Bukhari (2021) Buletin Fakulti Kejuruteraan Mekanikal dan Pembuatan Edisi 1/2021. [Bulletin]
Yaakob, Maizatul Azrina and Omar, Mohd Azwadi and Ahmad, Mohd Khairul and Mohd Azidi, Muhammad Akif (2023) Buletin Institut Kejuruteraan Integrasi Julai-September 2023. [Bulletin]
Yaakob, Maizatulazrina and Omar, Mohd Azwadi and A. Karim, Hamizza Sofea (2022) Buletin Institut Kejuruteraan Integrasi July-Sept 2022. [Bulletin] (Submitted)
Article
A Rhaffor, Kauthar and Jamian, Rahim (2020) The role of 5s in improving Occupational Safety and Health Management System (OSHMS) in Small and Medium Enterprises (SMEs). Journal of Safety, Health and Ergonomics, 2 (1). pp. 1-6. ISSN 2682-745X
A. Rahim, Erween and Sasahara, Hiroyuki (2011) An analysis of surface integrity when drilling inconel 718 using palm oil and synthetic ester under, MQL condition. Machining Science and Technology: An International Journal, 15 (1). pp. 76-90. ISSN 1091-0344
ABDULLAH, H. and LAW BOON HUI, C. and ZAKARIA, M. S. (2023) MINIMIZATION OF MACHINING PROCESS SEQUENCE BASED ON ANT COLONY ALGORITHM AND CONVENTIONAL METHOD. Journal of Engineering Science and Technology, 18 (2). pp. 949-962.
Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2023) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry.
Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2023) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry, 16. pp. 1-11.
Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2022) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry. pp. 1-11. ISSN 1878-5352
Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2023) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal: Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry. pp. 1-11.
Ab Aziz, Nur Azrie Hizad and Md Ali, Umi Fazara and Ahmad, Anis Atikah and Mohamed Dzahir, Mohd Irfan Hatim and Khamidun, Mohd Hairul and Abdullah, Muhammad Faiq (2023) Non-functionalized oil palm waste-derived reduced graphene oxide for methylene blue removal:Isotherm, kinetics, thermodynamics, and mass transfer mechanism. Arabian Journal of Chemistry, 16. ISSN 104387
Ab Wahab, N. and Mohd Saleh, Afferry and Nordin, Abd Khahar and Tamin, Nor Fauzi and Ibrahim, Mohd Azimin and Ahmad, Suziana and Abdul Hadi, Dayanasari (2018) Development of portable magnetic clampingfor lathe machine. ARPN Journal of Engineering and Applied Sciences, 13 (3). pp. 902-906. ISSN 1819-6608
Ab. Rahman, Hamidah and Hassan, Razali (2020) Cashless transactions through ecommerce platform in the Post-Covid-19. International Journal of Research and Innovation Management, 6 (1). pp. 1-12. ISSN 2462-1293
Abd Rahim, Erween and Dorairaju, Hemarani (2018) Evaluation of mist flow characteristic and performance in Minimum Quantity Lubrication (MQL) machining. Measurement, 123. pp. 213-225. ISSN 0263-2241
Abd Rahim, Erween and Jaafar, Mohd Noor and Mohid, Zazuli and Ibrahim, Mohd Rasidi and Ahmad, Said (2018) A study on cryogenic supercritical carbon dioxide coolant delivery technique when machining of AISI 1045 steel. Journal of Mechanical Engineering, 5 (3). pp. 37-49. ISSN 1823- 5514
Abd Rahim, Erween and Sasahara, Hiroyuki (2017) Three dimensional finite element modeling, when drilling of Ti-6Al-4V. International Journal of Robotics and Mechatronics, 4 (1). pp. 34-38. ISSN 2288-5889
Abd. Rahman, Hamimah and Muchtar, Andanastuti and Haron, Syaharizan and Muhamad, Norhamidi and Abdullah, Huda (2012) Kesan parameter pemprosesan dan bahan tambah terhadap pengendapan elektroforetik filem LSCF6428. Sains Malaysiana, 41 (2). pp. 237-244. ISSN 0126-6039
Abd. Rahman, Hamimah and Muchtar, Andanastuti and Muhamad, Norhamidi and Abdullah, Huda (2012) Structure and thermal properties of La0.6Sr0.4Co0.2Fe0.8O3�d–SDC carbonate composite cathodes for intermediate- to low-temperature solid oxide fuel cells. Ceramics International, 38. pp. 1571-1576. ISSN 0272-8842
Abd. Rahman, Ramhuzaini and Sepehri, Nariman (2017) Experimental comparison between proportional and PWM-solenoid valves controlled servopneumatic positioning systems. Transactions of the Canadian Society for Mechanical Engineering, 41 (1). pp. 65-83. ISSN 0315-8977 (Submitted)
Abdul Mukhti, Muhammad Ammar Qayyum and Didane, Djamal Hissein and Ogab, Mohammed and Manshoor, Bukhari (2021) Computational fluid dynamic simulation study on NACA 4412 airfoil with various angle of attacks. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-8.
Abdul Sani, Amiril Sahab and Abd Rahim, Erween and Samion, Syahrullail (2017) Tribological performance of modified jatropha oil containing oil-miscible ionic liquid, for machining applications. Journal of Mechanical Science and Technology, 31 (12). pp. 5675-5685. ISSN 1738-494X
Abdulhameed, Mohammed Abdulmunem and Othman, Mohd Hafiz Dzarfan and Al Joda, Haider Nadhom Azziz and Ismail, Ahmad Fauzi and Matsuura, Takeshi and Harun, Zawati and A. Rahman, Mukhlis and Puteh, Mohd Hafiz and Jaafar, Juhana (2017) Fabrication and characterization of affordable hydrophobic ceramic hollow fibre membrane for contacting processes. Journal of Advanced Ceramics, 6 (4). pp. 330-340. ISSN 2226-4108
Abdullah, Nur Munirah and Kamarudin, M Saddam and M Rus, Anika Zafiah and Abdullah, M F L (2017) Preparation of conductive polymer graphite (PG) composites. IOP Conference Series: Materials Science and Engineering, 226 (12181). pp. 1-6. ISSN 1757-8981
Abdullahi, Tijjani and Ahmad, Norhayati and Wahit, Mat Uzir and Harun, Zawati (2018) Adhesive bonding of thermoplastic polyurethane with metallic wire. Advanced Science Letters, 24 (6). pp. 4045-4049. ISSN 1936-6612
Ahmad, M.A. Haikal and Rahim, M. Zulafif and Mohd Fauzi, M. F. and Azis, N. Hafizah and Ismail, A.E. and Hassan, Mohd Fahrul and Arifin, A.M.T. and Yusof, M.S. and Ibrahim, M. Rasidi (2017) Electrical discharge machining of polycrystalline diamond using copper electrode – finishing condition. IOP Conference Series: Materials Science and Engineering (MSE), 203 (012019). ISSN 1757-899X
Ahmad, Rosli and Rashid, M. H. S. and Hasan, Sulaiman and Harun, Zawati and Yusof, M. S. and Hassan, Suhaimi and Rahman, M.M. (2020) The effect of holmium on microstructure and mechanical properties of light metal alloy. Journal of Critical Reviews, 7 (8). pp. 1260-1263. ISSN 2394-5125
Ahmed Ghaleb Amer, Abdulrahman and Sapuan, Syarfa Zahirah and Ashyap, Adel Y. (2022) Efficient metasurface for electromagnetic energy harvesting with high capture efficiency and a wide range of incident angles. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-13.
Ainuddin, Ainun Rahmahwati and Hakiri, Norio and Muto, Hiroyuki and Matsuda, Atsunori (2012) Micropatterning of non-crystalline methylsilsesquioxane–titania hybrid films based on their structural changes with UV irradiation. Physica Status Solidi A. pp. 1-7. ISSN 1862-6300
Ainuddin, Ainun Rahmahwati and Hakiri, Norio and Muto, Hiroyuki and Sakai, Mototsugu and Matsuda, Atsunori (2011) Mechanical properties comparison of phenylsilsesquioxane–methylsilsesquioxane hybrid films by indentation. Journal of the Ceramic Society of Japan, 119 (6). pp. 490-493. ISSN 1348-6535
Ainuddin, Ainun Rahmahwati and Ishigaki, Tomonori and Hakiri, Norio and Muto, Hiroyuki and Sakai, Mototsugu and Matsuda, Atsunori (2012) Influence of UV irradiation on mechanical properties and structures of sol–gel-derived vinylsilsesquioxane film. Journal of the Ceramic Society of Japan, 120 (10). pp. 442-445. ISSN 1348-6535
Al-Alimi, Sami and Lajis, Mohd. Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Altharan, Yahya and Didane, Djamal Hissein and Saif, Yazid and Sadeq, Safwan and M. Sabbar, Huda and S. Msebawi, Muntadher (2022) Effects of Preheating Temperature on Deformed AA6061 Aluminium Properties of Hot Equal Channel Angular Pressing (ECAP) by Using Deform-3D Software. Arabian Journal for Science and Engineering. pp. 1-9.
Al-Juhais, Lafta Flayih Muhsin and Mas, Fawzi and Mohammad, Hafidh Hassan (2020) Numerical study on heat transfer enhancement in a curved channel with baffles. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 68 (2). pp. 72-83. ISSN 2289-7879
Allah, Mohammad Zaraa and Hariri, Azian and Mohamed Kamar, Haslinda (2022) Journal of Advanced Research in Fluid Mechanics and Thermal Sciences. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (1). pp. 45-58. ISSN 2289-7879
Amiril, S.A.S. and Rahim, E.A. and Embong, Z. and Syahrullail, S. (2018) Tribological investigations on the application of oil-miscible ionic liquids additives in modified Jatropha-based metalworking fluid. Tribology International, 120. pp. 520-534. ISSN 0301-679X
Amiril, S.A.S. and Rahim, E.A. and Syahrullail, S. (2017) A review on ionic liquids as sustainable lubricants in manufacturing and engineering: recent research, performance, and applications. Journal of Cleaner Production, 168. pp. 1571-1589. ISSN 0959-6526
Andsaler, Adiba Rhaodah and Khalid, Amir and Jaat, Norrizam (2017) Simulation and modeling of mixture formation under variant ambient condition and injection pressure of biodiesel spray. International Journal of Integrated Engineering, 9 (3). pp. 18-23. ISSN 2229-838X
Araby, Sherif and Meng, Qingshi and Zhang, Liqun and Zaman, Izzuddin and Majewski, Peter and Ma, Jun (2015) Elastomeric composites based on carbon nanomaterials. Nanotechnology, 26. pp. 1-23. ISSN 0957-4484
Araby, Sherif and Zaman, Izzuddin and Meng, Qingshi and Kawashima, Nobuyuki and Michelmore, Andrew and Kuan, Hsu-Chiang and Majewski, Peter and Ma, Jun and Zhang, Liqun (2013) Melt compounding with graphene to develop functional, high-performance elastomers. Nanotechnology, 24 (165601). pp. 1-14. ISSN 0957-4484
Azahar, Mohamad Amirur Rahman and Ishak, Izuan Amin and Sulaiman, Syabillah and Jaat, Norrizam and Zulkifli, Abdul Fathul Hakim and Sukiman, Safra Liyana and Osman, Kahar and Darlis, Nofrizalidris (2023) The Effect of Different Reynolds Number On Solid Sphere Using CFD and Its Verification. INTERNATIONAL JOURNAL OF INTEGRATED ENGINEERING, 15 (1). pp. 96-105. ISSN 2229-838X
Azmir, Nor Azali and Ghazali, Mohd Imran and Yahya, Musli Nizam and Ali, Mohamad Hanafi (2016) Hand-arm vibration disorder among grass-cutter workers in Malaysia. International Journal of Occupational Safety and Ergonomics (JOSE), 22 (3). pp. 433-438. ISSN 1080-3548
Baharuddin, Nurul Akidah and Abd Rahman, Hamimah and Muchtar, Andanastuti and Sulong, Abu Bakar and Abdullah, Huda (2013) Development of lanthanum strontium cobalt ferrite composite cathodes for intermediate- to low-temperature solid oxide fuel cells. Journal of Zhejiang University-SCIENCE A (Applied Physics & Engineering). ISSN 1673-565X
Chan, B.L. and Lajis, M.A. (2015) Direct recycling of aluminium 6061 chip through cold compression. International Journal of Engineering and Technology (IJET), 15 (4). pp. 43-47. ISSN 0975-4024
Che Dalim, Che Samihah and Kolivand, Hoshang and Kadhim, Huda and Sunar, Mohd Shahrizal and Billinghurst, Mark (2017) Factors influencing the acceptance of augmented reality in education: a review of the literature. Journal of Computer Sciences, 13 (11). pp. 581-589. ISSN 1549-3636
Chua, Bing Liang and Mohammed, Akmal Nizam and Sapit, Azwan and Razali, Mohd Azahari and Hushim, Mohd Faisal and Khalid, Amir and Mohd Yusof, Nurul Farhana (2020) Numerical simulation of aerofoil with flow injection at the upper surface. CFD Letters, 12 (1). pp. 98-110. ISSN 2180-1363
Didane, Djamal Hissein and Bajuri, Muhammad Nur Arham and Boukhari, Mahamat Issa and Manshoor, Bukhari (2022) Performance investigation of vertical axis wind turbine with savonius rotor using Computational Fluid Dynamics (CFD). CFD Letters, 14 (8). pp. 116-124.
F. Esmail, Bashar A. and A. Majid, Huda and Dahlan, Samsul Haimi and Zainal Abidin, Zuhairiah and Himdi, Mohamed and Dewan, Raimi and A. Rahim, Mohamad K. and Ashyap, Adel Y. I. (2020) Reconfigurable metamaterial structure for 5G beam tilting antenna applications. Waves in Random and Complex Media. pp. 1-14. ISSN 1745-5030
Ghazali, N. B. and Seman, F. C. and Isa, K. and Ramli, K. N. and Z. Abidin, Z. and Mustam, S. M. and Haek, Haek and Z. Abidin, A. N. and Asrokin, A. (2022) Twisted pair cable fault diagnosis via random forest machine learning. Computers, Materials & Continua, 71 (3). pp. 5427-5440.
Gupta, Reshu and Selvam, Janani and Vajravelu, Ashok and Nagapan, Sasitharan (2023) Analysis of a Squeezing Flow of a Casson Nanofluid between Two Parallel Disks in the Presence of a Variable Magnetic Field. Symmetry, 15 (120). pp. 1-17. ISSN 2073-8994
Haji Mohd, Mohd Norzali and Mohd Asaar, Mohd Shahrimie and Ong Lay Ping, Ong Lay Ping and Rosdi, Bakhtiar Affendi (2023) Vision-Based Hand Detection and Tracking Using Fusion of Kernelized Correlation Filter and Single-Shot Detection. Applied Sciences, 13 (7433). pp. 1-16.
Hamdan, Mohamad Hafizzudin and Mohd Asry, Anis Maisarah and Mustafa, Farahiyah (2020) Low wireless power transfer using inductive coupling for remote control car charger with indicator. Journal of Electrical Power and Electronics Systems, 2 (1). pp. 1-5. ISSN 2672-734X
Hanif, Hanifa and Shafie, Sharidan and Roslan, Rozaini and Ali, Anati (2023) Collision of hybrid nanomaterials in an upper-convected Maxwell nanofluid: A theoretical approach. Journal of King Saud University – Science, 35. pp. 1-13.
Hariri, Azian and Azreen, N. and Abdull, Norhidayah and Leman, M and M Yusof, M. Z. (2014) Determination of customer requirement for welding fumes index development in automotive industries by using quality function deployment approach. International Journal of Automotive and Mechanical Engineering (IJAME), 9. pp. 1609-1619. ISSN 2229-8649
Hariri, Azian and Paiman, Nuur Azreen and Leman, Abdul Mutalib and Md. Yusof, Mohammad Zainal (2014) Development of welding fumes health index (WFHI) for welding workplace’s safety and health assessment. Iranian Journal of Public Health, 43 (8). pp. 1045-1059. ISSN 2251-6085
Harun, Zawati and Tze, Ching Ong and Matsuura, Takeshi and Hubadillah, Siti Khadijah and Dzarfan Othman, Mohd Hafiz and Ismail, Ahmad Fauzi (2018) Modelling of transport mechanisms and drying shrinkage for multilayer ceramic membrane structure. Chemical Engineering Research and Design, 133. pp. 111-125. ISSN 0263-8762
Hassan, Haswira and Abdullah, Mohammad Kamil (2017) Effects of LoD and PoD in combined-hole film cooling. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2509-2514. ISSN 1819-6609
Hassan, S. and A. Rahim, E. and Mohid, Z. and Warap, N.M. (2014) Dynamic analysis of micro-milling machine. Applied Mechanics and Materials, 465. pp. 699-703. ISSN 1660-9336
Hassan, S. and Yusof, M. S. and Embong, Z and Ding, S. and Maksud, M. I. (2018) Surface study of graphene ink for fine solid lines printed on BOPP Substrate in micro-flexographic printing using XPS analysis technique. IOP Conference Series: Materials Science and Engineering, 298. pp. 1-6. ISSN 1757-899X
Hau, Chin Yong and Nordin, Normayati and Rasidi, Shamsuri Mohamed and Teo, Wen Yong and Anuar, Muhammad Musleh and Shariff, Muhammad Zahid Firdaus (2022) Effect of angle of turn on loss characteristics and flow rectification of curve diffuser. CFD Letters, 14 (1). pp. 38-51. ISSN 2180-1363
Hayder, Ali Mohammed and Sapit, Azwan and Abed, Qahtan Adnan (2017) Review of solar thermal storage techniques. ARPN Journal of Engineering and Applied Sciences, 12 (21). pp. 6103-6119. ISSN 1819-6608
Ibrahim, Haziqatulhanis and Sazali, Norazlianie and Wan Salleh, Wan Norharyati and Ngadiman, Nor Hasrul Akhmal and Fadila, Nor Akmal and Harun, Zawati (2022) Outlook on the carbon-based materials for heavy metal removal. Biointerface Research in Applied Chemistry, 12 (4). pp. 5303-5323. ISSN 2069-5837
Ibrahim, M. H. I. and Abdul Razak, M. I. and Mustafa, N. and Selamat, M. A. (2016) Carbon-copper (C-Cu) composites using local carbon material through warm compaction process for potential electrical and electronic applications. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11117-11123. ISSN 1819-6608
Ibrahim, Rosziati and Ahmed, Maryam and Nayak, Richi and Jamel, Sapiee (2020) Reducing redundancy of test cases generation using code smell detection and refactoring. Journal of King Saud University - Computer and Information Sciences, 32 (3). pp. 367-374. ISSN 1319-1578
Ibrahim, Rosziati and Asri, N. A. M. and Jamel, Sapiee and Abdul Wahab, Jahari (2021) Validation of requirements for transformation of an urban district to a smart city. (IJACSA) International Journal of Advanced Computer Science and Applications, 12 (7). pp. 322-328.
Ibrahim, Siti Aida and Ahmid, Muhamad Nazim (2017) Influence of calcination temperature towards Fe-TiO2 for visible-driven photocatalyst. Materials Science Forum, 888. pp. 435-440. ISSN 1662-9752
Ishak, I. A. and Ali, M S M and Shaikh Salim, S A Z (2018) Numerical simulation of flow around a simplified high-speed train model using OpenFOAM. "IOP Conference Series: Materials Science and Engineering Journal ", 152 (1). pp. 1-12. ISSN 1757-899X
Ishak, I. A. and Mat Ali, Mohamed Sukri and Mohd Yakub, Mohamad Fitri and Shaikh Salim, Sheikh Ahmad Zaki (2019) Effect of crosswinds on aerodynamic characteristics around a generic train model. INTERNATIONAL JOURNAL OF RAIL TRANSPORTATION, 7 (1). pp. 23-54. ISSN 2324-8386
Ishak, I. A. and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki (2018) Mesh size refining for a simulation of flow around a generic train model. Wind and Structures, 24 (3). pp. 223-247. ISSN 1598-6225
Jamaluddin, Nor Athira and Talib, Norfazillah and Abdul Sani, Amiril Sahab (2021) Performance comparative of modified jatropha based nanofluids in orthogonal cutting process. Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (2). pp. 461-468.
Jamian, Saifulnizan and Watanabe, Yoshimi and Satob, Hisashi (2019) Formation of compositional gradient in AlSiC FGMs fabricated under huge centrifugal forces using solid-particle and mixed-powder methods. CERAMICS INTERNATIONAL, 45 (7). pp. 9444-9453. ISSN 0272-8842
K., Khairu and M ., Ibrahim and Hassan, S. and Hehsan, H. and Kasmin, Ashari and E., Fazial (2014) Study on layer fabrication for 3D structure of photoreactive polymer using DLP projector. Applied Mechanics and Materials, 465. pp. 911-915. ISSN 1660-9336
Kamarudin, Kamarul Azhar and Mohamed, Mohamed Nasrul Hatta and Anpalagan, Ranjhini and Ismail, Al Emran and Ab Baba, Noor Wahida and Mohd Noor, Mohd Khir and Abdullah, Ahmad Sufian (2018) Seashell structure under binder influence. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 46 (1). pp. 122-128. ISSN 2289-7879
Kamarudin, M.Saddam and M. Rus, Anika Zafiah and Abdullah, Nur Munirah and Abdullah, M. F. L (2017) Dynamic mechanical properties of bio-polymer graphite thin films. IOP Conference Series: Materials Science and Engineering, 9 (1). pp. 1-5. ISSN 1757-8981
Kareem, AK and Fakhri, OM and Ismail, Al Emran and Taib, I and Ali, IR and Nemah, MN (2020) Comparative computational study of mechanical behavior in self-expanding femoropopliteal stents. The International Journal of Integrated Engineering, 12 (1). pp. 210-224. ISSN 2229-838X
Kassim, Noordiana and Mohamad, Mahmod Abd Hakim and Janon, Mohd Najib and Mohd Hanifa, Rafizah and Yusof, Yusri (2013) Development of STEP-NC based machining system for machining process information flow. Applied Mechanics and Materials, 315. pp. 278-282. ISSN 1660-9336
Lajis, M. A. and Ahmad, A. and Yusuf, N.K. and Azami, A. H. and Wagiman, A. (2017) Mechanical properties of recycled aluminium chip reinforced with alumina (Al2O3) particle. MATERIALWISSENSCHAFT UND WERKSTOFFTECHNIK. pp. 1-5. ISSN 9335137
Lajis, M.A. and Hosni, N.A.J. (2018) The influences of various mixed dielectric fluids on the performance electrical discharge machining of AISI D2 hardened steel. Materials Science and Engineering Technology, 49. pp. 413-419. ISSN 0933-5137
Lajis, M.A. and Karim, A.N. Mustafizul and A.K., M. Nurul Amin and A., M.K. HAFIZ and L., G. Turnad (2008) Prediction of tool life in end milling of hardened steel AISI D2. European Journal of Scientific Research, 21 (4). pp. 592-602. ISSN 1450-216X
Lajis, Mohd Amri and Mohd Radzi, H.C.D. and Nurul Amin, A.K.M. (2009) The implementation of Taguchi method on EDM process of tungsten carbide. European Journal of Scientific Research, 26 (4). pp. 611-619. ISSN 1450-216X
Lashari, Saima Anwar and Ibrahim, Rosziati and Md Taujuddin, Nik Shahidah Afifi and Senan, Norhalina and Sari, Suhaila (2018) Thresholding and quantization algorithms for image compression techniques: a review. ASIA-PACIFIC JOURNAL OF INFORMATION TECHNOLOGY AND MULTIMEDIA, 7 (1). 83 -89. ISSN 2289-2192
Le, Quyen-Huyen and Kuan, Hsu-Chiang and Dai, Jia-Bin and Zaman, Izzuddin and Luong, Lee and Ma, Jun (2010) Structure property relations of 55 nm particle-toughened epoxy. Polymer, 51. pp. 4867-4879. ISSN 0032-3861
Lee, S.Y. and Ahmad, H. (2018) Woven fabric carbon fibre composites hybrid joints under quasi-static testing. Journal of Advanced Manufacturing Technology, 12 (1). pp. 13-24. ISSN 1985-3157
Lee, W. K. and Ratnam, M. M. and Ahmad, Z. A. (2016) In-process detection of chipping in ceramic cutting tools during turning of difficult-to-cut material using vision-based approach. International Journal of Advanced Manufacturing Technology, 85. pp. 1275-1290. ISSN 0268-3768
Luqman Hakim Alias, Luqman Hakim Alias and Jamiluddin Jaafar, Jamiluddin Jaafar and Januar Parlaungan Siregar, Januar Parlaungan Siregar and Tezara Cionita, Tezara Cionita and Mohd Bijarimi Mat Piah, Mohd Bijarimi Mat Piah and Agustinus Purna Irawan, Agustinus Purna Irawan and Deni Fajar Fitriyana, Deni Fajar Fitriyana and Hamidon Salleh, Hamidon Salleh and Ahmed Nurye Oumer, Ahmed Nurye Oumer (2023) Influence of dammar gum application on the mechanical properties of pineapple leaf fiber reinforced tapioca biopolymer composites. Polymer Composites.. pp. 1-11.
M., Mohd Amran and Masrol, Shaiful Rizal and Ismon, Maznan and Roslan, Mohd Nazrul and Yahya, Musli Nizam and Ghazali, Mohd Imran and Munawar, Shahruddin (2013) Evaluation of sound comfort in examination hall using acoustical environmental analyses. Applied Mechanics and Materials, 315 (NIL). pp. 825-829. ISSN 1662-7482
Ma, Jun and Bao La, Ly Truc and Zaman, Izzuddin and Meng, Qingshi and Luong, Lee and Ogilvie, Denise and Kuan, Hsu-Chiang (2011) Fabrication, structure and properties of epoxy/metal nanocomposites. Macromolecular Materials and Engineering, 296. pp. 465-474. ISSN 1438-7492
Ma, Jun and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Izzuddin, Zaman and Bengtsson, Carl and Kuan, Hsu-Chiang (2013) Covalently bonded interfaces for polymer/graphene composites. Journal of Materials Chemistry A: materials for energy and sustainability (Journal of Materials Chemistry A), 1. pp. 4255-4264. ISSN 2050-7488
Maarup, Syahrul Nizam and Hamdan, Rafidah and Othman, Norzila and Al-Gheethi, Adel and Alkhadher, Sadeq and El-Hady, M. M. Abd and Saeed, S. El-Sayed (2023) Steel Slag and Limestone as a Rock Filter for Eliminating Phosphorus from Domestic Wastewater: A Pilot Study in a Warm Climate. Water, 15 (657). pp. 1-18.
Madlan, Mohd Amran and Ghazali, M. I. and Zaman, Izzuddin and Kasron, Md Zainorin and Ying, T. C. (2017) The application of coconut fiber as dissipative silencer. IOP Conference Series: Materials Science and Engineering, 165 (1). pp. 1-6. ISSN 1757-899X
Madon, Rais Hanizam and Mas Fawzi, Mas Fawzi and Sarwani, Muhamad Khairul Ilman and Osman, S.A. and Razali, Mohd Azahari and Mohammad, Abdul Wahab (2018) Effect of reaction temperature on steam methane reforming’s yield over coated nickel aluminide (Ni3Al) catalyst in micro reactor. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 50 (2). pp. 170-177. ISSN 2289-7879
Mahdi, Ammar A M H and W Salim, W S I and M Farhan, Kahlan H (2020) Fuzzy model reference adaptive controller for position control of a DC linear actuator motor in a robotic vehicle driver. International Journal of Integrated Engineering, 12 (3). pp. 235-244. ISSN 2229-838X
Manh, Tran Dinh and Nam, Nguyen Dang and Jacob, Kavikumar and Hajizadeh, Ahmad and Babazadeh, Houman and Mahjoub, Mohammed and Tlili, I. and Li, Z. (2020) Simulation of heat transfer in 2D porous tank in appearance of magnetic nanofluid. Physica A: Statistical Mechanics and its Applications, 550. pp. 1-10. ISSN 0378-4371
Manshoor, Bukhari and Mohamed Ster, Laily Azwati and Khalid, Amir and Zaman, Izzuddin (2017) An effect of straight and serpentine flow fielddesign on proton exchange membrane fuel cell. ARPN Journal of Engineering and Applied Sciences, 12 (10). pp. 3076-3079. ISSN 1819-6608
Marsi, N. and M Rus, A Z The effects of biopolymers composite based waste cooking oil and titanium dioxide fillers as superhydrophobic coatings. International Research and Innovation Summit. ISSN 1757-8981
Marsi, Noraini and Huzaisham, Nur Athirah and Muhd Rus, Anika Zafiah and Lecthumanan, Thineshnaidu and Mahmood, Salwa and Masrol, Shaiful Rizal and Abdul Rashid, Azrin Hani and Mohd Fodzi, Muhammad Haikal and Thanasingam, Rupashinii (2020) The mechanical performance of tile based on plastic waste (PW) mixed wood waste (MWW). Journal of Computational and Theoretical Nanoscience, 17 (1). pp. 795-802. ISSN 1546-1955
Marsi, Noraini and Mohd Rus, Anika Zafiah and Ibrahim, Mohd Razali and Samsuddin, Syahir Arif and Abdul Rashid, Azrin Hani (2017) The synthesis and surface properties of newly eco-resin based coconut oil for superhydrophobic coating. Solid State Phenomena, 266. pp. 59-63. ISSN 1662-9779
Mashori, Sumaiya and Ganesen, Ashok Kumar and Lam, Hong Yin and Sahari, Norain and Norjali, Rasida and Sim, Sy Yi (2020) Development of cut to length machine using programmable logic controller with human machine interface. International Journal of Advanced Trends in Computer Science and Engineering, 9 (1). pp. 454-459. ISSN 2278-3091
Masood, Ibrahim and Hassan, Adnan (2014) Bivariate quality control using two-stage intelligent monitoring scheme. Expert Systems with Applications, 41 (16). pp. 7579-7595. ISSN 0957-4174
Masood, Ibrahim and Hassan, Adnan (2010) Issues in development of artificial neural network-based control chart pattern recognition schemes. European Journal of Scientific Research, 39 (9). pp. 336-355. ISSN 1450-216X
Masood, Ibrahim and Zainal Abidin, Nadia Zulikha and Roshidi, Nur Rashida and Rejab, Noor Azlina and Johari, Mohd Faizal (2014) Design of an artificial neural network pattern recognition scheme using full factorial experiment. Applied Mechanics and Materials, 465. pp. 1149-1154. ISSN 1660-9336
Masrol, S.R. and Ibrahim, M.H.I. and Adnan, S. and Amir Shah, M.S.S. and Main, N.M. and Esa, M.F. and Othman, M.H. (2014) Soda anthraquinone pulping of oil palm male flower spikes. Applied Mechanics and Materials, 660. pp. 373-377. ISSN 1662-7482
Masrol, Shaiful Rizal and Irwan Ibrahim, Mohd Halim and Adnan, Sharmiza and Ahmad Tajudin, Muhammad Syauqi Asyraf and Raub, Radhi Abdul and Abdul Razak, Siti Nurul Aqma and Md Zain, Siti Nur Faeza (2017) Effects of beating on the characteristics of Malaysian durian (Durio Zibethinus Murr.) rind chemi-mechanical (CMP) pulp and paper. Jurnal Teknologi, 80 (2). pp. 9-17. ISSN 2180–3722
Masrol, Shaiful Rizal and Madlan, M.A. and Md Salleh, Salihatun and Ismon, Maznan and Roslan, Mohd Nazrul (2013) Vibration analysis of unbalanced and misaligned rotor system using laser vibrometer. Applied Mechanics and Materials, 315 (NIL). pp. 681-685. ISSN 1662-7482
Mat Sharif, Zainon and Mohd Taib, Norhasnina and Yusof, Mohd Sallehuddin and Rahim, Mohammad Zulafif and Mohd Tobi, Abdul Latif and Othman, Mohd Syafiq (2017) Designation of soap molder machine and procedure for transparent soap. "IOP Conference Series: Materials Science and Engineering Journal ", 203 (012001). pp. 1-7. ISSN 1757-899X
Mazlan, Muhammad Hazli and Todo, Mitsugu and Yonezawa, Ikuho and Takano, Hiromitsu (2017) Biomechanical alteration of stress and strain distribution associated with vertebral fracture. Journal of Mechanical Engineering, 2 (2). pp. 123-133. ISSN 1823-5514
Mazlan, Nadia Farhana and Ahmad, Rosli (2020) Material characterization of magnesium elektron ZRE1 alloy with Praseodymium (Pr) and Erbium (Er) additions. Research Progress in Mechanical and Manufacturing Engineering, 1 (1). pp. 146-152. ISSN 2773-4766
McNeil, David A. and Sadikin, Azmahani and Bamardouf, Khalid H. (2012) A mechanistic analysis of shell-side two-phase flow in an idealised in-line tube bundle. International Journal of Multiphase Flow, 45. pp. 53-69. ISSN 0301-9322
Md Noh, Mohammad Soffi and Kamarudin, Ahmad Fahmy and Mokhatar, Shahrul Niza and Burhanudin, Mohd Khairy and Ahmad, Z. and Ibrahim, A. (2020) Axial compression behaviour of full-scale prefabricated wood-wool wall panel. The International Journal of Integrated Engineering, 12 (1). pp. 280-288. ISSN 2229-838X
Md Salleh, Salihatun and Rahim, E.A. and Roslan, Mohd Nazrul and Ismon, Maznan and Madlan, M.A. and Masrol, Shaiful Rizal and Jelani, Abdul Razak and Ahmad, Mohd Rizal (2013) Hand-arm vibration of unskilled oil palm motorised cutter operator. Applied Mechanics and Materials, 315 (NIL). pp. 695-699. ISSN 1662-7482
Md Yasser, Mona Alis and Embong, Zaidi and Abd Rahim, Erween and Abdullah Sani, Amiril Sahab and Kamdani, Kamaruddin (2020) Study of ionic liquids (AIL and PIL) viscosity and its functional groups under heat treatment on cutting tool surface using fourier-transform infrared spectroscopy (FTIR). Materials Science Forum, 981. pp. 98-103. ISSN 0255-5476
Meng, Qingshi and Zaman, Izzuddin and R. Hannam, Joshua and Kapota, Shepherd and Luong, Lee and Youssf, Osama and Ma, Jun (2011) Improvement of adhesive toughness measurement. Polymer Testing, 30. pp. 243-250. ISSN 0142-9418
Mohamad, Siti Shafika and Abdol Rahman, Mohd Nasrull (2018) A review on prevalence and risk factors of musculoskeletal disorders (Msds) among VDT users. International Journal of Engineering & Technology, 7 (3.2). pp. 30-34. ISSN 2227-524X
Mohammed, Abdulrahman A. B. A. and Hasan, Zaimah and Borhana Omran, Abdoulhdi A. and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2022) Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films. Polymers, 15 (63). pp. 1-21. ISSN 2073-4360
Mohammed, Abdulrahman A. B. A. and Zaimah Hasan, Zaimah Hasan and Borhana Omran, Abdoulhdi A. and M. Elfaghi, Abdulhafid and Khattak, M.A. and Ilyas, R. A. and Sapuan, S. M. (2023) Effect of Various Plasticizers in Different Concentrations on Physical, Thermal, Mechanical, and Structural Properties of Wheat Starch-Based Films. Polymers, 15 (63). pp. 1-21. ISSN 2073-4360
Mohd Akhair, Siti Hajar and Harun, Zawati and Jamalludin, Mohd Riduan and Shuhor, Muhammad Fikri and Kamarudin, Noor Hasliza and Yunos, Muhamad Zaini and Ahmad, Azlinnorazia and Azhar, Mohd Faiz Hafeez (2017) Effect of graphene oxide with controlled stirring time. Chemical Engineering Transactions, 56. pp. 709-714. ISSN 2283-9216
Mohd Akhair, Siti Hajar and Harun, Zawati and Jamalludin, Mohd Riduan and Shuhor, Muhammad Fikri and Kamarudin, Noor Hasliza and Yunos, Muhamad Zaini and Ahmad, Azlinnorazia and Azhar, Mohd Faiz Hafeez (2017) Polymer mixed matrix membrane with graphene oxide for humic acid performances. Chemical Engineering Transactions, 56. pp. 697-702. ISSN 2283-9216
Mohd Fodzi, Muhammad Haikal and Marsi, Noraini and Huzaisham, Nur Athirah and Thana Singam, Rupashinii (2020) Influence of the ratio on the mechanical properties of epoxy resin composite with diapers waste as fillers for partition panel application. Test Engineering & Management, 83 (3-4). pp. 10141-10151. ISSN 0193-4120
Mohd Harun, Dalila and Mohd Tobi, A L and Jamian, Saifulnizan (2020) Investigation on the effect of reciprocating sliding wear test for titanium alloy, Ti-6Al-4V under frequency set up. International Journal of Emerging Trends in Engineering Research, 8 (12). pp. 23-28. ISSN 2347-3983
Mohd Hussin, Umi Nuratiqah and Lam, Hong Yin and Sim, Sy Yi and Mustafa, Farahiyah and Ishak, Maizul (2020) Development of prototype smart helmet and blind spot detection for motorcyclist safety features. Advances in Computing and Intelligent System, 2 (2). pp. 1-6. ISSN 2682-7426
Mohd Salleh, Sufiah and Mat Ali, Mohamed Sukri and Shaikh Salim, Sheikh Ahmad Zaki and Ishak, I. A. and Shirakashi, Masataka and Muhammad, Sallehuddin (2017) Aerodynamics characteristics around simplified high speed train model under the effect of crosswinds. ARPN Journal of Engineering and Applied Sciences, 12 (8). pp. 2604-2609. ISSN 1819-6608
Mohd Tahir, Muhammad Faheem and Abdullah, Mohd Mustafa Al Bakri and Abd Rahim, Shayfull Zamree and Mohd Hasan, Mohd Rosli and Sandu, Andrei Victor and Vizureanu, Petrica and Ghazali, Che Mohd Ruzaidi and Abdul Kadir, Aeslina (2022) Mechanical and durability analysis of fly ash based geopolymer with various compositions for rigid pavement applications. Materials, 15. pp. 1-18.
Mohid, Z. and Rahim, E.A. (2018) Chip pattern, burr and surface roughness in laser assisted micro milling of Ti6Al4V using micro ball end mill. Journal of Mechanical Engineering and Sciences, 12 (1). pp. 3410-3430. ISSN 2289-4659
Mohid, Z. and Warap, N. M. and Hassan, S. and Ismail, M.I.S. and Ibrahim, R. and A. Rahim, E. (2014) Numerical analysis of laser heating for laser assisted micro milling application. Applied Mechanics and Materials, 465. pp. 720-724. ISSN 1660-9336
Muhammad, Nur Ainnaa Mardhiah and Awang, Noor Azura and Basri, Hatijah and Abd Latif, Amirah and Zalkepali, Noor Ummi Hazirah Hani and Nik Mahmud, Nik Noor Haryatul Eleena (2024) Steady Q-switched erbium-doped fiber laser pulse generation by exploiting spider silk as a passive saturable absorber. Optics and Laser Technology, 169. pp. 1-8.
Murad, Muhamad Nasir and Sharif, S. and Rahim, E. A. and Riva, R. (2014) Effect of drill point angle on surface integrity when drilling titanium alloy. Advanced Materials Research, 845. pp. 966-970. ISSN 1022-6680
Mydin, Md Azree Othuman and Khalid, Mohamad Sukeri and Omar, Roshartini and Mohammed Najm, Hadee and Mahmood Abdal Qaidi, Shaker and Awoyera, Paul Oluwaseun (2023) Influence of Crisscross Fiberglass Strip on Axial Compressive Strength of Lightweight Foamed Concrete. Journal of Advanced Research in Applied Sciences and Engineering Technology, 29 (2). pp. 1-10. ISSN 2462-1943
Nagentrau, M. and Mohd Tobi, A. L. and Kamdi, Z. and Ismail, M. I. and Sambu, M. (2017) A study on wear failure analysis of tungsten carbide hardfacing on carbon steel blade in a digester tank. Journal of Failure Analysis and Prevention, 17. pp. 861-870. ISSN 1547-7029
Nasir, N. F. and W. Daud, W. R. and Kamarudin, S. K. and Yaakob, Z. (2014) Methyl esters selectivity of transesterification reaction with homogenous alkaline catalyst to produce biodiesel in batch, plug flow, and continuous stirred tank reactors. International Journal of Chemical Engineering, 2014 (931264). pp. 1-13. ISSN 1687-806X
Nasir, N.F. and W. Daud, W.R. and Kamarudin, S.K. and Yaakob, Z. (2013) Process system engineering in biodiesel production: a review. Renewable and Sustainable Energy Reviews, 22. pp. 631-639. ISSN 1364-0321
Nasir, Siti Hana and Troynikov, Olga (2017) Influence of hand movement on skin deformation: a therapeutic glove design perspective. Applied Ergonomics, 60. pp. 154-162. ISSN 0003-6870
Noh@Seth, Nur Hazirah and Nordin, Normayati and Othman, Safiah and Raghavan, Vijay R. (2014) Investigation of flow uniformity and pressure recovery in a turning diffuser by means of baffles. Applied Mechanics and Materials, 465-. pp. 526-530. ISSN 1660-9336
Nor Azman, Muhammad Faez and Ahmad, Rosli (2020) Review of the effect of erbium and neodymium on microstructure and mechanical properties of magnesium alloy. Research Progress in Mechanical and Manufacturing Engineering, 1 (1). pp. 101-106. ISSN 2773-4765
Nur Yunus, Faizal Amin and Mohd Salleh, Zuan Azhary and Rahim, Mohd Bekri and Mohd Affand, Haryanti and Kamis, Arasinah and Syazwan Mustafa, Mohd Syafiq Field Measurement of Air Velocity and Temperature Factors that Influence the Thermal Comfort in Shuttle Bus. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 101 (3). pp. 164-171. ISSN 2289-7879
Ong, Pauline and Vui, Desmond Daniel Sheng Chin and Choon, Sin Ho and Chuan, Huat Ng (2018) Modeling and optimization of cold extrusion process by using response surface methodology and metaheuristic approaches. Neural Computing and Applications, 29. pp. 1077-1087. ISSN 0941-0643
Ong, Pauline and Zainuddin, Zarita and Kee, Huong Lai (2017) A novel selection of optimal statistical features in the DWPT domain for discrimination of ictal and seizure‑free electroencephalography signals. Pattern Anal Application. pp. 1-13.
Othuman Mydin, Md Azree and Mohd Nawi, Mohd Nasrun and Omar, Roshartini and Anmar Dulaimi, Anmar Dulaimi and Hadee Mohammed Najm, Hadee Mohammed Najm and Shaker Mahmood Abdal Qaidi, Shaker Mahmood Abdal Qaidi and Mohanad Muayad Sabri Sabri, Mohanad Muayad Sabri Sabri (2023) Mechanical, durability and thermal properties of foamed concrete reinforced with synthetic twisted bundle macro-fibers. Frontiers In Materials. pp. 1-13.
Pauline Ong, Pauline Ong and Anelka John Koshy, Anelka John Koshy and Kee Huong Lai, Kee Huong Lai and Chee Kiong Sia, Chee Kiong Sia and Maznan Ismon, Maznan Ismon (2024) A deep learning approach for health monitoring in rotating machineries using vibrations and thermal features. Decision Analytics Journal, 10. pp. 1-9.
Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Experimental study of helical milling on CFRP (carbon fibre reinforced polymer) for the hole making process. Advanced Materials Research, 576. pp. 68-71. ISSN 1022-6680
Rahim, E. A. and Mohid, Z. and Mat, K. C. and Jamil, M. F. M. and Koyasu, R. and Sasahara, H. (2012) Hole making process of carbon fiber reinforced polymer (CFRP) using end mill cutting tool. Advanced Materials Research, 576. pp. 64-67. ISSN 1022-6680
Rahim, E. A. and Sasahara, H (2011) Investigation of tool wear and surface integrity on MQL machining of Ti-6AL-4V using biodegradable oil. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 225 (9). pp. 1505-1511. ISSN 0954-4054
Rahim, E.A. and Mohid, Z. and Rahman, A.H.A. and Bahman, M.F. (2012) The effect of internal through coolant on grinding performance on AISI1020 mildsteel. Advanced Materials Research, 576. pp. 87-90. ISSN 1022-6680
S., Adzila and S., Ramesh and I., Sopyan (2016) Properties of magnesium doped nanocrystalline hydroxyapatite synthesize by mechanochemical method. ARPN Journal of Engineering and Applied Sciences, 11 (24). ISSN 1819-6608
S., Muhammad Farid and Z., Samad and A.B., Husaini and M.R., Arshad and S., Mahzan (2013) Preliminary analysis on generated jet pressure from ionic polymer composite actuated radial contraction using balloon manometry technique. Indian Journal of Geo-Marine Sciences, 42 (8). pp. 1023-1027. ISSN 0379-5136
Sadikin, Azmahani and Mohd Yunus, Nurul Akma and Abd Hamid, Saiful Anuar and Ismail, Al Emran and Salleh, Salihatun and Ahmad, Sufizar and Abdol Rahman, Mohd Nasrull and Mahzan, Shahruddin and Ayop, Sallehuddin Shah (2018) A comparative study of turbulence models on aerodynamics characteristics of a NACA0012 airfoil. International Journal of Integrated Engineering, 10 (1). pp. 134-137. ISSN 2229-838X
Saleh, Nor Shela and Yaacob, Hashim Fauzy and Rosli, Mohd Shafie (2015) Critical review: assessing and seeking the intricacy or discrepancy of ulrich model transforming paradigm in organization human resource. Mediterranean Journal of Social Sciences, 6 (2). pp. 324-332. ISSN 2039-9340
Salh, Adeb and Mohd Shah, Nor Shahida and Audah, Lukman and Mohd Shah, Shaharil and Hamzah, Shipun Anuar (2020) Distributed power control for 5G millimeter wave dense small cell. Journal of Advanced Research In Dynamical and Control Systems, 12 (2). pp. 656-663. ISSN 1943023X
Samiran, N. A. and Mohd Jaafar, Mohammad Nazri and Ng, Jo-Han and Shiung, Lam Su and Tung, Chong Cheng (2016) Progress in biomass gasification technique – with focus on Malaysian palm biomass for syngas production. RENEWABLE & SUSTAINABLE ENERGY REVIEWS, 62. pp. 1047-1062. ISSN 1364-0321
Samiran, N. A. and Ng, Jo-Han and Mohd Jaafar, Mohammad Nazri and Valera-Medinad, Agustin and Tung, Chong Cheng (2017) Swirl stability and emission characteristics of CO-enriched syngas/air flame in a premixed swirl burner. PROCESS SAFETY AND ENVIRONMENTAL PROTECTION, 112. pp. 315-326. ISSN 0957-5820
Samiran, N. A. and Ng, Jo-Han and Mohd Jaafar, Mohammad Nazri and ValeraMedina, Agustin and Tung, Chong Cheng (2016) H2-rich syngas strategy to reduce NOx and CO emissions and improve stability limits under premixed swirl combustion mode. International Journal of Hydrogen Energy, 41 (42). pp. 19243-19255. ISSN 0360-3199
Sam’an, Muhammad and Dasrila, Yosza and Muslim, Much Aziz (2021) The new fuzzy analytical hierarchy process with interval type-2 trapezoidal fuzzy sets and its application. Fuzzy Information and Engineering, 13 (3). pp. 391-419.
Sapit, Azwan and Mohammed, Akmal Nizam and Razali, Mohd. Azahari and Hushim, Mohd Faisal Bin and Khalid, Amir and Manshoor, Bukhari (2016) Rapeseed oil spray development of diesel idi spray nozzle under air movement influence. ARPN Journal of Engineering and Applied Sciences, 11 (18). pp. 11183-11187. ISSN 1819-6608
Sazali, Norsuhailizah and Harun, Zawati and Azhar, Faiz Hafeez and Bahri, Syamsutajri Syamsol and Raja Ahmad, Raja Puteri Nurul Adibah and Hussin@Isa, Rosniza and Misdan, Nurasyikin (2021) The effect of various molarity sodium hydroxide (NaOH) on the hydrosodalite formation from synthesis of Johor Kaolin, Malaysia by hydrothermal method. Materials Today: Proceedings, 46. pp. 2045-2051.
Siswanto, Waluyo Adi and Ibrahim, Mohd Norihan and Madlan, Mohd Amran and Mohamad, Siti Mariah (2011) Shaker table design for electronic device vibration test system. International Journal of Engineering and Technology, 3 (6). pp. 663-668. ISSN 1793-8244
Sulong, Nurulsaidatulsyida and Mohd Rus, Anika Zafiah and Ab Latif, Najibah and Wahab, Nor’Aini and Omar, Afian and Mohd Salim, Nurul Syamimi and Mat Hassan, Nik Normunira and Marsi, Noraini and Egi Agustian, Egi Agustian (2023) Photodegradation Mechanism of Biopolymer Blended with High Density Polyethylene (HDPE). Journal of Advanced Research in Applied Mechanics, 103 (1). pp. 1-12. ISSN 2289-7895
Supar, K. and Ahmad, H. (2018) Multi-holes configurations of woven fabric kenaf composite plates: experimental works and 2-D modelling. Journal of Mechanical Engineering and Sciences, 12 (2). pp. 3539-3547. ISSN 2289-4659
Supawi, Aiman and Ahmad, Said and Talib, Norfazillah and Lee Woon Kiow, Lee Woon Kiow and Ho Fu Haw, Ho Fu Haw and Lajis, Mohd Amri (2024) Electrode Wear Rate of RBD Palm Oil as Dielectric Fluids on Electrical Discharge Machining (EDM) at Different Peak Current and Pulse Duration of Titanium Alloys. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 112 (2). pp. 54-63. ISSN 2289-7879
T. Arifin, A. M. and Abdullah, S. and ., Md. Rafiquzzaman and Zulkifli, R. and Wahab, D. A. (2014) Failure characterisation in polymer matrix composite for un-notched and notched (open-hole) specimens under tension condition. Fibers and Polymers, 15 (8). pp. 1729-1738. ISSN 1229-9197
T. Arifin, A.M. and Abdullah, S. and Zulkifli, R. and Wahab, D.A. (2014) Fatigue failures of differences behaviour on CSM/woven roving composite materials. Applied Mechanics and Materials, 471. pp. 335-340. ISSN 1660-9336
Talib, Norfazillah and Abdul Sani, Amiril Sahab and Hamzah, Nur Adlisham (2019) Modified Jatropha nano-lubricant as metalworking fluid for machining process. Jurnal Tribologi, 23 (1). pp. 90-96. ISSN 2289-7232
Talib, Norfazillah and Md. Nasir, Ramdziah and Abd. Rahim, Erween (2018) Investigation on the tribological behaviour of modified jatropha oil with hexagonal boron nitride particles as a metalworking fluid for machining process. International Journal of Integrated Engineering, 10 (3). pp. 57-62. ISSN 2229-838X
Turnad, L. Ginta and A.K., M. Nurul Amin and H.C.D., Mohd Radzi and Lajis, Mohd Amri (2009) Tool life prediction by response surface methodology in end milling titanium alloy Ti-6Al-4V using uncoated WC-Co inserts. European Journal of Scientific Research, 28 (4). pp. 533-541. ISSN 1450-216X
Turnad, L. Ginta and A.K., M. Nurul Amin and Lajis, Mohd Amri and A.N., Mustafizul Karim and H.C.D., Mohd Radzi (2009) Improved tool life in end milling Ti-6Al-4V through workpiece preheating. European Journal of Scientific Research, 27 (3). pp. 384-391. ISSN 1450-216X
Tze, Ching Ong and Buja, Andy and Ak MawanSia, Dino Sabastian and Chee, Kiong and Yee, See Khee and Ong, Pauline (2020) Simulation of various resonators as viscometer for engine oils. Journal of Social Sciences and Technical Education, 1 (1). pp. 2716-6740. ISSN 2716-6740
Urooj Gul Sandilo, Urooj Gul Sandilo and Amir Detho, Amir Detho and Memon, Asif Ali and Abdul Qayoom Jakhrani, Abdul Qayoom Jakhrani and Abdul Kadir, Aeslina (2023) Equilibrium and Mechanism of Removal of Total Dissolved Solids and Hardness by Adsorption onto Neem Seed Powder Adsorbent. Water Air Soil Pollut. pp. 1-14.
Wahab, Mohd Daniel and Mohamad, Zaleha (2020) Characterization of mechanical and physical properties of eggshell waste by using cold compaction. Advanced Research in Natural Fibers, 2 (1). pp. 1-4. ISSN 2682-7409
Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malik, Ahmad Khairul and Madun, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, 129. pp. 1-8. ISSN 103348
Wahab, Norhaliza and Abu Talib, Mohd Khaidir and Abd Malik, Ahmad Khairul and Madun, Aziman (2023) Effect of cement stabilized peat on strength, microstructure, and chemical analysis. Physics and Chemistry of the Earth, Parts, 129. pp. 1-8.
Yusuf, Nur Kamilah and Lajis, Mohd Amri and Ahmad, Azlan (2017) Hot press as a sustainable direct recycling technique of aluminium: mechanical properties and surface integrity. Materials, 10 (902). pp. 1-18. ISSN 1996-1944
Zaharia, Siti Norazila and Mohd Sani, Mohd Shahrir and Abu Husain, Nurulakmar and Ishak, Mahadzir and Zaman, Izzuddin (2016) Dynamic analysis of friction stir welding joints in dissimilar material plate structure. Jurnal Teknologi (Sciences & Engineering), 78 (6-9). pp. 57-65. ISSN 2180–3722
Zainal Abidin, Munira and Junqueira-Gonçalves, Maria Paula and V Khutoryanskiy, Vitaliy and Niranjan, Keshavan (2017) Intensifying chitin hydrolysis by adjunct treatments – an overview. Journal of Chemical Technology and Biotechnology, 92 (11). pp. 2787-2798. ISSN 0268-2575
Zakaria, Nur Aini and Ali Shah, Zuraini and Kasim, Shahreen (2020) Protein structure prediction using robust principal component analysis and support vector machine. International Journal of Data Science, 1 (1). pp. 14-17. ISSN 2722-2039
Zaman, Izzuddin and Araby, Sherif and Khalid, Amir and Manshoor, Bukhari (2014) Moisture absorption and diffusivity of epoxy filled layered-structure nanocomposite. Advances in Environmental Biology, 8 (8). pp. 2626-2631. ISSN 1995-0756
Zaman, Izzuddin and Kuan, Hsu-Chiang and Dai, Jingfei and Kawashima, Nobuyuki and Michelmore, Andrew and Sovi, Alex and Dong, Songyi and Luonga, Lee and Ma, Jun (2012) From carbon nanotubes and silicate layers to graphene platelets for polymer nanocomposites. Nanoscale, 4. pp. 4578-4586. ISSN 2040-3364
Zaman, Izzuddin and Kuan, Hsu-Chiang and Meng, Qingshi and Michelmore, Andrew and Kawashima, Nobuyuki and Pitt, Terry and Zhang, Liqun and Gouda, Sherif and Luong, Lee and Ma, Jun (2012) A facile approach to chemically modified graphene and its polymer nanocomposites. Advanced Functional Materials. pp. 1-9. ISSN 1616-301X
Zaman, Izzuddin and Le, Quyen-Huye and Kuan, Hsu-Chiang and Kawashima, Nobuyuki and Luong, Lee and Gerson, Andrea and Ma, Jun (2011) Interface-tuned epoxy/clay nanocomposites. Polymer, 52. pp. 497-504. ISSN 0032-3861
Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Araby, Sherif (2014) From clay to graphene for polymer nanocomposites—a survey. Journal of Polymer Research, 21 (5). pp. 1-11. ISSN 1022-9760
Zaman, Izzuddin and Manshoor, Bukhari and Khalid, Amir and Meng, Qingshi and Araby, Sherif (2014) Interface modification of clay and graphene platelets reinforced epoxy nanocomposites: a comparative study. Journal of Material Science, 49. pp. 5856-5865. ISSN 0022-2461
Zaman, Izzuddin and Mohd Rozlan, Syaiful Azmirul and Shiau, Wei Chan and Yusoff, A. (2017) Theoritical modelling of sound radiation from plate. IOP Conference Series: Materials Science and Engineering, 165 (NIL). pp. 1-6. ISSN 1757-899X
Zaman, Izzuddin and Tam, Thanh Phan and Kuan, Hsu-Chiang and Meng, Qingshi and Truc, Bao La and Lee, Luong and Youssf, Osama and Ma, Jun (2011) Epoxy/graphene platelets nanocomposites with two levels of interface strength. Polymer, 52. pp. 1603-1611. ISSN 0032-3861
Zhi Wei Loh, Zhi Wei Loh and Mohd Zaid, Mohd Hafiz and Awang Kechik, Mohd Mustafa and Yap Wing Fen, Yap Wing Fen and Wei Mun Cheong, Wei Mun Cheong and Mayzan, Mohd Zul Hilmi (2024) Synthesis of bioactive glass-ceramics: Effect of the incubation duration on mechanical properties using PBS solution. Materials Letters, 361. pp. 1-4.
Zohari, Mohd Hakimi and Zainal Abidin, Muhammad Heidzer and Hussein, Lukman Iqbal and Mokhtar, Mohd Hezri (2020) Development of smart solar tracking system. Journal of Advanced Industrial Technology and Application, 1 (2). pp. 31-37. ISSN 2716-7097
Book Section
UNSPECIFIED (2020) Thermal analysis of 99.4% pure aluminium granules during investment casting by in-situ melting technique. In: Saleh, Aslinda and Idris, Mohd Hasbullah and Talib, Norfazillah and Abdullah, Haslina and Lee, Woon Kiow and Mat Hassan, Nik Normunira and Abd Rashid, Razlin, (eds.) Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 39-47. ISBN 978-967-2389-56-9
Abdullah, Aslam (2020) On three classes of mesh for the solution of a singularly perturbed two-point boundary value problem. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 115-132. ISBN 978-967-2916-56-7
Abdullah, Haslina and Zaman, Nizam Nurehsan and Talib, Norfazillah and Lee, Woon Kiow and Saleh, Aslinda and Zakaria, Mohamad Shukri (2020) Minimization of tool path length of drilling process using particle swarm optimization (PSO). In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 48-56. ISBN 978-967-2389-56-9
Abu Bakar, Nor Hidayah and Mohd Zaini, Mohd Zairin Aiza and Mohd Fuzi, Muhamad Firdaus and Hassan, Mohd Fahrul and Radzuan, Muhammad Dinie Al-Syafiq and Hussein, Muhammad Hafeez (2017) Hydraulic bearing puller. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 102-112. ISBN 9789670764986
Achmad, Zainun and Ismail, Al Emran (2020) Experimental study of fatigue age on SUP-9 leaf spring steel which received heat treatment and shot peening processes. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 1-15. ISBN 978-967-2916-56-7
Adan, Nor Faezah and Abdul Razak, Mohamad Aidil Firdaus and Sufian, Nurul Najiha and Ahamad, Nurizyan Syasya (2020) Development of Automated Feeding and Security System for Small-Scale Livestock Farm Using Arduino. In: Electronics & Microcontroller Projects for IoT Applications. Penerbit UTHM. ISBN 978-967-2389-02-6
Ariffin, Ahmad Hamdan and Yaakub, Mohd Fauzi (2020) A review on aviation restructuring action to survive in COVID-19 challenges: Malaysia perspective. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 16-26. ISBN 978-967-2916-56-7
Baharudin, Muhammad Azzrul Ashraff and Didane, Djamal Hissein and Batcha, Mohd Faizal Mohideen and Abdullah, Kamil and Mohammed, Akmal Nizam and ., Mas Fawzi (2020) CFD simulation study of multistage vertical axis wind turbine (VAWT). In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 47-60. ISBN 978-967-2916-56-7
Che Ros, Ziana and Nordin, Muhammad Faris and Anuar, Muhammad Abdullah and Abdul Razak, Muhammad Hazim (2020) Power Factor Correction – A Simulation Approach. In: Electronics & Microcontroller Projects for IoT Applications. Penerbit UTHM, pp. 63-73. ISBN 978-967-2389-02-6
Che Saad, Muhammad Adib and Mohideen Batcha, Mohd Faizal and Razali, Mohd Azahari and Abdul Rahman, Ramhuzaini and Ahmad Nazri, Mohd Ariff and Lam, Hong Yin and Ishak, Maizul and Yusop, Azli (2020) Development of an aquaponic system using ablution greywater for recreational purpose. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 61-73. ISBN 978-967-2916-56-7
Dol Baharin, Muhammad Zulhusmi and Abd. Manan, Abdul Shukur and Baharom, Muhamad Hafizuddin and Hassan, Mohd Fahrul and Che Mat, Nor Ain and Ahmad, Muhamad Nurhisham (2017) Extruder for food product (otak–otak) with heater and roll cutter. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 76-88. ISBN 9789670764986
Husin, Mohd Asri and Shahrudin, Muhammad Shahrunizam and Sapiange, Muhamad Hanif and Abdul Razak, Siti Zarina and Hassan, Mohd Fahrul (2017) Dried chili seeds separator machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 1-14. ISBN 9789670764986
Isa, Noor Amira and Ahmad Bareduan, Salleh (2020) Methodology to develop bottleneck-based heuristic for permutation flow shop scheduling. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 98-114. ISBN 978-967-2916-56-7
Ismail, Suhairi and Mohammad Noor, Hafsa and Kamaruddin, Syamsul Azrin and Mohammad Sauti, Muhammad Amir Aiman and Abdul Halim, Muhammad Hazim and Ismail, Muhammad Fikri Syazani (2020) Pembersih bilah kipas siling. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 19-36. ISBN 978-967-2389-80-4
Ismail, Suhairi and Mohammad Noor, Hafsa and Omar, Amin Shah and Benmahfouz Azhar, Aisyah Azhar and Zainuddin, Nurul Hidayah Natasha and Raman, Nurulnastashah (2020) Alat pengutip buah. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 61-78. ISBN 978-967-2389-80-4
Ismail, Suhairi and Yahya, Mohd Shahir and Janon, Mohd Najib and Abdul Mutalib, Mohammad Asyraf Safwan and Rosnizam, Nurshafawati and Abdul Aziz, Nuraini (2020) Troli tong gas. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 93-104. ISBN 978-967-2389-80-4
Johar, Ahmad Sufiyan and A. Karim, Mohamad Nur and Mohidin, Mohamad Nasiruddin and Mohd Yazid, Muhamad Afiq Najmi and Hassan, Mohd Fahrul and Nardir, Nur Atikah and Wan Ali, Wan Norsyukriah (2017) Pressure fryer. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 50-62. ISBN 9789670764986
Kamaruddin, Muhammad Hazeem and Yac’cob, Muhammad Afiq Adham and Mohd Haizan, Mohamad Azrul Azhad and Amiruddin, Fatin Nur Ainina and Hassan, Mohd Fahrul and Muhmad Afandi, Farah Danieza (2017) Shallots skin peeler machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 63-75. ISBN 9789670764986
Kamarudin, Kamarul-Azhar and Mohd Nor, Mohd Khir and Ismail, Al Emran and Abdul Hamid, Iskandar and Abdullah, Ahmad Sufian (2020) Progressive damage modeling of synthetic fiber polymer composites under ballistic impact. In: Modelling of Damage Processes in Biocomposites, Fibre-Reinforced Composites and Hybrid Composites. Elsevier Ltd., pp. 115-132. ISBN 9780081022979
Kamdi, Zakiah (2020) Plasma transfer arc welding (PTAW) for depositing tungsten carbide-nickel cermet coating for corrosion. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 145-163. ISBN 978-967-2916-56-7
Kassim, Noraniah and Basharie, Siti Mariam and Fauzi, Muhamad Razizy and Abd Rashid, Muhamad Hazim and Mashuri, Muhammad Amirul Adli and Mohd Rizal, Muhammad Faisal (2020) Alat pemungut tandan kelapa sawit darjah kebebasan. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 105-114. ISBN 978-967-2389-80-4
Kassim, Noraniah and Janon, Mohd Najib and Mohamad, Mahmod Abd Hakim and Basharie, Siti Mariam and Kadis, Ghazali (2020) Alat pencungkil ubi kayu. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 37-46. ISBN 978-967-2389-80-4
Lee, Jia En and Wong, Shih Jye and Lee, Woon Kiow and Talib, Norfazillah and Ong, Pauline and Abdullah, Haslina and Saleh, Aslinda and Mat Hassan, Normunira and Abd Rashid, Razlin (2020) Review on the effect of ceramic reinforcements with different weight percentage and process parameters on the mechanical properties of aluminium metal matrix composite. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 28-38. ISBN 978-967-2389-56-9
M Elfaghi, Abdulhafid (2020) Higher order compact flowfield-dependent variation (HOC-FDV) method for one-dimensional viscous flow. In: Research Trends in Multidisciplinary Research and Development. Penerbit UTHM, pp. 57-79. ISBN 978-93-5335-627-9
MD Zin, Muhammad Fariq and Didane, Djamal Hissein and Ogab, Mohammed and M Elfaghi, Abdulhafid and Afolabi, Lukmon Owolabi (2020) Performance evaluation of a counter-rotating vertical axis wind turbine (VAWT) on a moving train. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 133-144. ISBN 978-967-2916-56-7
Mat Hassan, Nik Normunira and M. Rus, Anika Zafiah and Saleh, Aslinda and Marsi, Noraini and Mohamed Yusop, Fatimah and Samiran, Norafzanizam and Sulong, Nurulsaidatulsyida and Tuan Ismal, Tuan Noor Hasanah and Mohammad Noor, Hafsa (2020) Mechanical characterization of ABS recyling based electric and electronic equipment (WEEE) by using injection molding. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 20-27. ISBN 978-967-2389-56-9
Mohd Harun, Dalila and Thenan, Thamil and Ahmad Nordin, Nurani and Mohd Tobi, Abd Latif and Jamian, Saifulnizan and Marsi, Noraini (2020) Study the effect of sliding frequency on reciprocating sliding wear test for titanium alloy Ti-6Al-4V. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 12-19. ISBN 978-967-2389-56-9
Mohd Joharudin, Nurul Farahin and Abdul Latif, Noradila and Mustapa, Mohammad Sukri and Badarulzaman, Nur Azam and Supawi, Aiman (2020) Mechanical properties of AA7075 aluminium chip reinforced rice husk silica by solid state technique. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 74-97. ISBN 978-967-2916-56-7
Mohd Rani, Mohd Hafis and Ismon, Mohd Nur Hakim and Hassan, Mohd Fahrul and Mohd Yusri, Nurul Hamira Yusma and Kassim, Shazreen and Ibrahim, Nur Afizah (2017) Motorized cart. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 113-124. ISBN 9789670764986
Ngadiron, Mohamad Faridzuan and Mohd Noor, Mohamad Ashraffudin and Hassan, Mohd Fahrul and Mohammad, Nur Adela and Shah Hamid, Saidatul Nabilah and Abd Rahim, Muhammad Syafiq (2017) 3 in 1 processor coconut dehusker machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 28-38. ISBN 9789670764986
O. Afolabia, Lukmon and M. A. Elfaghia, Abdulhafid and Didane, Djamal Hissein and Ismail, Al Emran and Mat Isa, Norasikin (2020) Assessment of thermal energy storage integrated solar thermal collector system: a review. In: Advances in Mechanical, Manufacturing and Aerospace Engineering. Penerbit UTHM, pp. 27-46. ISBN 978-967-2916-56-7
Rubani, Siti Nur Kamariah and Mansor, Ahmad Fadzli and Zakaria, Arihasnida Ariffin Normah and Hamzah, Norhasyimah (2021) Pembangunan sistem pengesan pada landasan mesin larik semasa operasi bebenang automatik. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 99-106. ISBN 978-967-2975-67-0
Rubani, Siti Nur Kamariah and Neko, Kenerthdick and Hamzah, Norhasyimah and Ariffin, Arihasnida and Zakaria, Normah (2021) Pembangunan pemegang bahan kerja berbentuk silinder untuk menghasilkan gear bagi mesin kisar jenis tegak. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 16-22. ISBN 978-967-2975-67-0
Subramaniam, Tamil Selvan and Ibrahim, Nur Shahrizah (2021) Rekabentuk shelter security system dan analisis kejuruteraan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 68-77. ISBN 978-967-2975-67-0
Sukarman, Muhammad Izwan and Hassan, Mohd Fahrul and Moktar, Muhammad Syukri Amri and Ramli, Mohamad Akmal and Jelani, Mohd Nashafizie and Ab Karim, Nurfarahnabila (2017) Multipurpose automatic Kerisik packaging machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 39-49. ISBN 9789670764986
Sumri, Muhamad Zamir and Anuar, Nurul Azwani and Hassan, Mohd Fahrul and Suhaini, Rozita and Ismail, Salmi and Syed Adnan, Syed Fadhil (2017) Wheelchair lifter. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 89-101. ISBN 9789670764986 (Submitted)
Talib, Norfazillah and Nagarajan, Sugan and Lee, Woon Kiow and Saleh, Aslinda and Abdullah, Haslina (2020) Microstructure analysis of aluminium metal matrix alloy with silicon carbide and hexogonal boron nitride. In: Mechanical, Materials and Manufacturing Engineering: Case Studies. Penerbit UTHM, pp. 1-11. ISBN 978-967-2389-56-9
Tuan Ibrahim, Tuan Mohd Hafeez and Ab. Rahman, Rosdi and Ahmad, Muhammad Shukri and Sarif, Muhammad Iqmal and Mohd Zain, Muhamad Nazim and Saniman, Mohamad Shafiq (2020) Mesin pembungkus nasi lemak. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 1-18. ISBN 978-967-2389-80-4
Tuan Ibrahim, Tuan Mohd Hafeez and Kadis, Ghazali and Othman, Khairulnizam and Mohamad Shokri, Muhammad Akmal and Khalid, Noor Fasya Fashihah and Nor Halim, Nur Hanani (2020) Mesin penyedut hampagas dwifungsi. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 79-92. ISBN 978-967-2389-80-4
Wahid, Herman and Zolkipli, Muhammad Faris Al Hafiz and Zamri, Muhammad Zulhafiz and Razali, Halimatus Saadiah (2020) Energy harvesting from pressured water flow with IoT monitoring. In: Sensor & Instrumentation System. Penerbit UTHM, pp. 87-92. ISBN 978-967-2389-84-2
Yahya, Mohd Shahir and Mohamad, Mahmod Abd Hakim and Kamaruddin, Syamsul Azrin and Mohd Nadzri, Muhammad Haziq Khairunnas and Razali, Nur Afiq and Mohd Suhaimin, Muhammad Syamil Hakim (2020) Khemah mangsa banjir patuh syariah. In: Inovasi Reka Bentuk Mesin Industri. Penerbit UTHM, pp. 47-60. ISBN 978-967-2389-80-4
Yunus, Faizal Amin Nur and Ahmad, Nur Athirah and Rahim, Mohd Bekri and Gerijih, Debie Devisser and Abdul Rahman, Khairul Anuar and Ali, Khairul Fahmi (2021) Reka bentuk semula produk menggunakan kaedah reka bentuk untuk pembuatan dan pemasangan melalui kejuruteraan balikan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 32-48. ISBN 978-967-2817-45-1
Zainuddin, Nur Ain and Zakaria, Normah and Ahmad, Muhammad Fazrulhelmi and Rubani, Siti Nur Kamariah and Hamzah, Norhasyimah and Ariffin, Arihasnida (2021) Mesin pengering asam keping. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 24-31. ISBN 978-967-2817-45-1
Zulkarnain, Muhammad Harith Ifwat and Mohd Nazaruddin, Nur Azieyana and Zulkipli, Mohd Fazli and Ismail, Nurul Syahira and Hassan, Mohd Fahrul and Mohd Gaus, Nur Farah Hanan and Abdul Omar, Nurzhatul Aziemah (2017) Fish ball maker machine. In: Engineering Design Project. Series 1. Penerbit UTHM, Batu Pahat, Johor, pp. 15-27. ISBN 9789670764986
Conference or Workshop Item
Abu Bakar, Hadzley and Fahmi, Naim and Mokhtar, Faiz and Tamin, Norfauzi and Azlan, Umar and Adam, Abdul Aziz and Izamshah, Raja and Kasim, Shahir (2018) Fabrication and machining performance of powder compacted alumina based cutting tool. In: MATEC Web of Conferences, 2017, Ukrainian State University of Railway Transport, Kharkiv, Ukraine.
Ahmad, Nur Fara Adila and Choy, Yaan Yee and Tay, Kim Gaik (2018) Nonlinear wave modulation in thick elastic tube contained with inviscid fluid. In: AIP Conference Proceedings.
Azlan, U. A. A. and Hadzley, M. and Tamin1, N. Fauzi and Noor, F. M. and Azhar, A. A. and Yusoff, M. Rahimi and Noriman, N. Z. (2017) Observation of built-up edge formation on a carbide cutting tool with machining aluminium alloy under dry and wet conditions. In: MATEC Web of Conferences.
Gen, N L and Ambak, K and Othman, M H and Yazid, M R M (2020) Utilization of 3D visual effect crossing facility to enhance pedestrian safety. In: 5th International Conference on Civil and Environmental Engineering for Sustainability (IConCEES 2019), 19 - 20 December 2019, Le Grandeur Palm Resort, Johor Malaysia.
Book
Hassan, Mohd. Fahrul and Thomas, Muhammad Adrian, eds. (2017) Engineering design project : series 1. Penerbit UTHM, Batu Pahat, Johor. ISBN 9789670764986
Thesis
A. Rahman, Khairul Azlan (2011) The development of mobile robot for air pollution data capture (POPOBOT). Masters thesis, Universiti Tun Hussein Malaysia.
Abbas, Abbas Allawi (2014) Optimization of parameters of laser non-linear inclined cutting on stainless steel metal. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abd. Rahim, Erween (2005) Performance evaluation of uncoated and coated carbide tools when drilling titanium alloy. Masters thesis, Universiti Teknologi Malaysia.
Abdul Hamid, Faizul Ezmat (2013) Investigation on different composition of powder metallurgy electrode (Cu-W) in high performance edm (HPEDM) on AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdul Hamid, Intan Sue Liana (2008) Reynolds number effects in designing a micromixer for biomems application. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdul Haq, Reazul Haq (2009) Performance evaluation of different types of graphite electrodes on titanium (Ti - 6A1 - 4V). Masters thesis, Universiti Teknologi Malaysia..
Abdul Rahman, Azman (2011) Liquid mixture control system using PLC. Masters thesis, Universiti Tun Hussein Malaysia.
Abdul Wahab, Siti Nur Wahidah (2014) Motor control system development using microcontroller based on PID controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdulguad, Osama. H. (2014) Aerodynamic comparison and validation of rans, K-ω, standard K-ɛ and URANS simulations of flat plate film-cooling. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdulhafidh Al-Dubai, Ala Abobakr (2019) Hand and elbow gesture recognition based on electromyography signal. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abdullah, Mohamad Syah Rizal (2013) Neural network controller design for position control system improvement. Masters thesis, Universiti Tun Hussein Malaysia.
Abdullah, Noor Farahdila (2012) Velocity profile compliance for a wheeled mobile robot. Masters thesis, Universiti Tun Hussein Malaysia.
Abdullah Alhamzi, Belal Mohammed (2014) A study of energy scavenging strategy in a tapping tree power. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Abu, Talib (2003) Penghasilan prosedur arahan keselamatan bengkel kayu bagi Pelajar Kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Abu Bakar, Afarulrazi (2006) Graphical user interface (GUI) for supervisory control of computer integrated manufacturing (CIM-70A) using SCADA. Masters thesis, Universiti Tun Hussein Malaysia.
Ahmad, A.Azman (2002) Merekabentuk dan menilai modul pengajaran dan pembelajaran mekanik pepejal 1 (MMPl) Bagi Kursus Diploma Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ahmad, A.Azman (2002) Merekabentuk dan menilai modul pengajaran dan pembelajaran mekanik pepejal 1 (mmpl) bagi kursus diploma kejuruteraan mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ahmad, Mohd Khairul Ikhwan (2011) Multifingered robot hand robot operates using teleoperation. Masters thesis, Universiti Tun Hussein Malaysia.
Ahmad, Norhidayah (2013) Linear quadratic gaussian (LQG) controller for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.
Ahmad, Sariah (2002) Penghasilan manual keselamatan bengkel kimpalan; satu tinjauan di Institut Latihan Perindustrian Muar. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ahmed Elshayeb, Said Abdo (2010) Multi-sensor fusion for automated guided vehicle positioning. Masters thesis, Universiti Tun Hussein Malaysia.
Al-Nasrawi, Jaafar Abdul Abbas Abbood (2022) Nanoparticle shapes boundary layer flow in nanofluid and their effects on heat transfer. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Alfan, Norman Hafizi (2013) Analysis of characteristic heat pipe as an efficient cooling heat transfer device. Masters thesis, Universiti Tun Hussein Malaysia.
Ali Ali, Athir Jaafar (2020) Smart vending machine counter using IOT. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Alias, Nor Akmal (2013) Linear quadratic regulator (LQR) controller design for inverted pendulum. Masters thesis, Universiti Tun Hussein Malaysia.
Altaher Mohamed, Mohamed Abdalwahab (2011) A comparative study fourth order runge kutta-tvd Scheme and fluent software case of inlet flow problems. Masters thesis, Universiti Tun Hussein Malaysia.
Anuar, Nurasiah Mira (2022) A parametric study of dredged marine soils as passive geosorbent for escherichia coli removal in leachate. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Awang Adi @Jumaat, Md. Syadiqin (2004) Penghasilan papan pengawal mikro (PPM) dan kesesuaian penggunaannya kepada Pelajar Diploma Kejuruteraan Elektronik di Politeknik Ungku Omar, Ipoh, Perak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Awang Besar, Julkifli (2013) Quadrotor stability using PID. Masters thesis, Universiti Tun Hussein Malaysia.
Basharie, Siti Mariam (2005) Performance modelling of refrigerants in a vapor compression refrigeration cycle. Masters thesis, Universiti Teknologi Malaysia.
Che Pa, Mohamad Fauzi (2003) Penghasilan buku panduan keselamatan di Makmal Teknologi Pembinaan (Kerja Kayu) KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Che Pa, Mohamad Fauzi (2003) Penghasilan buku panduan keselamatan di makmal teknologi pembinaan (kerja kayu) KUiTTHO. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Chin, Ken Leong (2013) Programmable logic controller based variable speed drives for educational trainer. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Daud, Nur Atiqah (2014) Modelling and control of heat exchanger by using bio-inspired algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Haris, Nur Ismalina (2013) Failure analysis of conveyor chain links: a case study at Top Glove Sdn. Bhd. Masters thesis, Universiti Tun Hussein Malaysia.
Haron, Hartini Sharninayati (2013) Linear quadratic regulator (LQR) controller design for DC Servo motor. Masters thesis, Universiti Tun Hussein Malaysia.
Hashim, Mohd Fadzil Muin (2007) Prediction of punching life span for phosphor bronze stamping operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Hassan, Noor Haslyena (2011) Study of using three dimensional printer for EDM electrode fabrication. Masters thesis, Universiti Tun Hussein Malaysia.
Hat, Mohd. Kamal (2004) Pembinaan pakej trainer board mikro pengawal 16F84 : kajian terhadap kesesuaian penggunaanya sebagai ABBM bagi mata pelajaran sistem mikropemproses dan mikro pengawal di kalangan Pelajar Kejuruteraan Elektrik pada peringkat ijazah pertama di KUITTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ibrahim, Mastura (2003) Keberkesanan pelaksanaan kerja makmal Program Teknologi Kejuruteraan Mekanikal KUiTTHO : sistem penilaian ujikaji Makmal Teknologi Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ibrahim, Mastura (2003) Keberkesanan pelaksanaan kerja makmal program Teknologi Kejuruteraan Mekanikal KUiTTHO : sistem penilaian ujikaji makmal Teknologi Kejuruteraan Mekanikal. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ishak, Maizul (2006) Development of online speed trap system (DOSTS). Masters thesis, Universiti Teknologi Malaysia.
Ishak, Siti Hajjar (2013) Tinjauan terhadap amalan keselamatan dalam kalangan pelajar dan pensyarah di makmal kejuruteraan Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ismail, Nurfakhirah (2013) Fuzzy logic controller design for inverted pendulum system. Masters thesis, Universiti Tun Hussein Malaysia.
Ismon, Maznan (2013) Condition monitoring of variable speed worm gearbox lubricated with contaminated gear oil. Masters thesis, Universiti Tun Hussein Malaysia.
Jaafar, Lizawati (2013) Automatic room temperature control. Masters thesis, Universiti Tun Hussein Malaysia.
Jaber Al-Talqani, Ayad Jasim (2014) Numerical simulation of heat transfers on a circular cylinder by an impinging jet with nanofluid. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Jaffar, Mohd Isa (2001) Amalan keselamatan di bengkel kayu kejuruteraan awam (satu tinjauan di Politeknik Ungku Omar, Politeknik Port Dickson dan Politeknik Shah Alam). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Jalani, Jamaludin (2005) Control strategies for automatic gantry crane system. Masters thesis, International Islamic University Malaysia.
Jalani, Noor Hisham (2008) Position control for linear motion servo system via nominal characteristic trajectory following controller. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Jamali, Qadir Bakhsh (2014) Design and analysis of a hybrid locomotion system for mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Jamit, Rexca (2014) An evaluation of aerodynamics performance of a moving car with wind turbine system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Jasni, Nur Akmal Hakim (2013) Cutting performance of advanced multilayer coated (TiAlN/AlCrN) in machining of AISI D2 hardened steel. Masters thesis, Universiti Tun Hussein Malaysia.
Jaswadi, Ngatinah (2003) Menyediakan buku panduan keselamatan di makmal teknologi perpaipan, Fakulti Teknologi Kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Jaswadi, Ngatinah (2003) Menyediakan buku panduan keselamatan di makmal teknologi perpaipan, Fakulti Teknologi Kejuruteraan KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Jeonmani, Sherinatasha (2011) Programmable velocity profile for wheeled mobile robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Johar, Muhammad Akmal (2007) Design and development of a brake system using smart materials. Masters thesis, University of Applied Science Ravensburg-Weingraten.
Jusoh, Ahmad Yusni (2002) Persepsi pelajar terhadap panduan keselamatan makmal kejuruteraan awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
KSM Kader Ibrahim, Babul Salam (2004) Control of A 2 D.O.F direct drive robot arm using integral sliding mode control. Masters thesis, Universiti Teknologi Malaysia.
Kamarudin, Kamarul-Azhar (2004) Air staging combustion and emission from oil burner. Masters thesis, Universiti Teknologi Malaysia.
Kamarudin, Noor Hasliza (2022) Fabrication and characterisation of ceramic hollow fibre membrane from metakaolin and corn cob ash for oil–water separation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Kosnan, Noor Mayafaraniza (2003) Kajian terhadap keperluan garis panduan pengendalian makmal automasi : pneumatik,bagi pelajar sarjana muda teknologi kejuruteraan mekanikal, Fakulti Teknologi Kejuruteraan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Libau, Charles Muling (2002) Meneliti perlaksanaan amalan keselamatan di bengkel pendawaian elektrik di Politeknik Kuching, Sarawak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Libau, Charles Muling (2002) Meneliti perlaksanaan amalan keselamatan di bengkel pendawaian elektrik di Politeknik Kuching, Sarawak. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Liew, Chia Woon (2014) Obstacle avoidance robot applying fuzzy control system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Lim, Boon Ping (2002) Mengenalpasti masalah dalam pembelajaran amali PLC ( Programmable Logic Controller) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Low, Euwing (2023) Magnetohydrodynamic dusty nanofluid flow over a moving plate with two different boundary conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.
M. Saad, Magedi Moh (2017) Ram air turbine enhancement for auxiliary power unit replacement. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Mahamad, Abd Kadir (2005) Monitoring and prediction of bearing failure by acoustic emission and neural network. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Mansor, Mohamad Norani (2005) An improvement to integrated model of electro pneumatic circuit for material handling in a manufacturing cell. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Md Jamal, Muhammad Hazwan (2013) Modelling and control of the fish feeder system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Md Seri, Suzairin (2009) Numerical simulation of jet impingement cooling on a smooth concave surface. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Md Zain, Mohd Zahiruddin (2005) Influence of electrical parameters and optimization of EDM performance measures on Ti-6A1-4V using DOE/TAGUCHI method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Mohamad, Nur Suriya (2013) A study of energy efficiency opportunities in Putrajaya Maritime Centre towards green building. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamad, Suhaimi (2014) Energy efficiency improvement for faculty of technical and vocational education building. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamad Ariffin, Siti Noor Aishah (2014) An automatic traffic cones dispenser and collector system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamad Mokhtar, Shah Jahan (2014) Simulation of solid fuel combustion in the cyclone combustion chamber using fluent-14.0. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohamed Yunus, Ahmad Syukri (2003) Pembentukan dan penilaian indikator bengkel elektrik cemerlang: satu kajian di Sekolah Menengah Teknik Johor Bahru. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Mohammed Saif, Yazid Abdulsameea (2014) Modelling and simulation of surface roughness obtain from micro milling by using artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd, Sofian (2006) Dynamic analysis of A 10M diameter wind turbine rotor under maximum wind load of Malaysia. Masters thesis, Universiti Teknologi Malaysia.
Mohd Abdoh, Fahrizal (2002) Penyediaan buku panduan keselamatan dan kesihatan di Makmal Kejuruteraan Awam Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Mohd Abdoh, Fahrizal (2002) Penyediaan buku panduan keselamatan dan kesihatan di makmal kejuruteraan awam Kolej Universiti Teknologi Tun Hussein Onn (KUiTTHO). Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Mohd Amin, Azriszul (2007) Analysis of temperature distribution in disc brakes. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Dzulkifli, Syarizul Amri (2021) A modified weighted support vector machine (WSVM) to reduce noise data in classification problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Muhsein Taib, Mohd Muhsein (2012) Experimental investigation on the feasibility and durability of a novel diesel particulate filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Nawi, Mohd Al-Hafiz (2013) Aerodynamics of a swirling fluidized bed. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Nor, Mohd Fahrurazi (2012) Development of step-compliant system for turn-mill operations. Masters thesis, Universiti Tun Hussein Malaysia.
Mohd Sadri, Mohd Pawzi (2013) Path planning algorithm for a car like robot based on MILP method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Salleh, Mohd Arif Anuar (2007) Systematic investigation of failure analysis on a steam trap bypass tube in a coalfired power plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mohd Yazit, Tengku Nursyarah Bariah (2003) Pembentukan dan penilaian indikator bengkel kayu kejuruteraan awam cemerlang: satu kajian di Politeknik Sultan Salahuddin Abdul Aziz Shah. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Mohd Zukeri, Mohd Zaim (2010) Study on cutting operation in turning process by 3D Simulation using deform 3D. Masters thesis, Universiti Tun Hussein Malaysia.
Mohmad Jaat, Md. Norrizam (2005) The application of energy analysis on an educational steam power plant. Masters thesis, Universiti Teknologi Malaysia.
Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.
Mohmd Arifin, Nabila Afif (2012) Finite element simulation of machining AISI 1045 steel using uncoated carbide tool. Masters thesis, Universiti Tun Hussein Malaysia.
Morrison Buah, Lorothy (2012) Supervisory control for conventional unitary air conditioning system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muhamad Damanhuri, Amir Abdullah (2021) PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Muhammad Muhyiddin, Ahmad Haniff (2014) A wireless camera supervision robot (CSR-BOT) for the cylindrical pipes and cables surfaces observation. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Muhammad Nasir Annadurai, Mohd Nizar (2023) Modelling and angle control of fiber braided bending actuator for finger rehabilitation. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Mustapa, Rozilaili (2003) Penghasilan buku panduan keselamatan di makmal teknologi pembinaan (kerja bata), KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ng, Ban Huat (2013) Development of energy-efficient building environmental quality evaluation framework. Masters thesis, Universiti Tun Hussein Malaysia.
Ng, Kok Mun (2006) A graphical method for automatic code generation from extended s-system petri net models. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Ngadengon @ Ngadungon, Rafidah (2005) A full order sliding mode tracking controller design for an electrohydraulic control system. Masters thesis, Universiti Teknologi Malaysia.
Nik Soh, Nik Mohd Zaini (2022) The spring back effect of oil palm empty fruit bunch fibre on physical and mechanical properties of cement board. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Nor Anuwar, Anis Amirah (2023) Characteristics of treated bamboo/cotton blend yarn produced from ring and rotor spinning techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Nor Salim, Nor Adrian (2012) Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba. Masters thesis, Univeristi Kebangsaan Malaysia.
Nor Salim, Nor Adrian (2012) Pengaruh geometri mekanisme jet denyut terhadap kadar pemindahan haba. Masters thesis, Universiti Kebangsaan Malaysia.
Noranai, Zamri (2008) Study of energy efficiency opportunities in UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Omar, Mohd Fairoz (2020) Design of segmental rotor and non-overlap windings in single-phase fefsm for low torque high speed applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Omar, Nurhanum (2013) Path planning algorithm for a car-like robot based on cell decomposition method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ong, Joo Hun (2008) Development of a genetic algorithm controller for cartesian robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Osman, Mustafe Adam (2018) Fesibility study of renewable energy-based microgrid hybrid system in Berbera Somaliland. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Othman, Razimah (2003) Penghasilan modul amalan keselamatan bagi meningkatkan tahap kesedaran pelajar di dalam makmal teknologi pembinaan (kerja kayu & perabot) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Othman, Zulhairi (2005) Comparison of RLL, state diagram, grafcet and petri net for the realization of logic controller. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Pairan, Mohamad Rasidi (2012) A simulation of film cooling in the leading edge region of a turbine blade (trench effect on film effectiveness from cylinder in crossflow). Masters thesis, Universiti Tun Hussein Malaysia.
Piedade, Salustiano Dos Reis (2008) Failure analysis of a superheater tube of a coal-fired power plant. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Po'a, Ayu Wirdawati (2002) Kajian terhadap amalan keselamatan dan kesihatan di Pusat Latihan Teknologi Tinggi (ADTEC) Batu Pahat. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Rahamat, Lily Afizah (2015) Effect of double stratification on boundary layer flow and heat of nanofluid over a vertical plate in the presence of chemical reaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ramasamy, Suchitra (2022) Cracking evaluation of micro steel fibre (MSF) concrete by utilising acoustic emission signal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Ribuan, Mohamed Najib (2006) Sonar sensor for an autonomous mobile robot. Masters thesis, Newcastle University.
Ruslee, Ruslinda (2008) Anti - swing control strategy for automatic 3 dof crane system using FLC. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Saesar, Luhur Budi (2012) Development of semi-autonomous mobile robot hardware-in-the-loop (HIL) simulation for indoor mapping. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sakury, Khairudin (2017) Olahan air sisa pusat penyembelihan ayam menggunakan elektrod keluli tahan karat dan aluminum melalui proses gabungan elektro-penggumpalan dan pengelompokan dan penggumpalan dengan menggunakan aluminum sulfat dan poli-aluminum klorida. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sapian, Nik Fazli (2012) Design of pulse jet coolant delivery system for minimal quantity lubricant (IP MQL) operation. Masters thesis, Universiti Tun Hussein Malaysia.
Sasi Koshad, Rabi Abrahim (2011) CFD simulation of heat transfer in vertical ribbed tube. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Selamat, Mohd Anuar (2004) Penilaian penggunaan pro-trainer dalam proses pengajaran dan pembelajaran (P&P) mata pelajaran robotik dan sistem kawalan (DTE 3593) di KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Seng, Sue Men (2011) Location theory based wind energy system planning. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Senin, Mohamad Syamir (2022) Mechanical, durability and damping properties for optimum rubberised concrete performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Shamsudin, Shazarel (2005) Development of the process planning for machining prismatic parts. Masters thesis, Universiti Putra Malaysia.
Sherwani, Fahad (2013) Robotic path planning using rapidly-exploring random trees. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Sies, Mohamad Farid (2018) Development of deflector flat spray nozzle with mixed of water and organic citric acid for emissions trap and cooling in the kitchen hood ventilation system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Sudin, Sukhairi (2012) Wireless knee joint angle measurement system using gyroscope. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Talib, Norfazillah (2017) Performance evaluation of biodegradable metalworking fluids for machining process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Tang, Hing Kwong (2002) Kepentingan pengetahuan dan kemahiran tentang penggunaan alat sistem keselamatan kebakaran di Makmal Kejuruteraan Awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Tang, Hing Kwong (2002) Kepentingan pengetahuan dan kemahiran tentang penggunaan alat sistem keselamatan kebakaran di makmal kejuruteraan awam KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Tee, Kian Sek (2011) A mechatronic system for achieving optimum alignment of lower limb prosthesis. Doctoral thesis, University of Leeds.
Tee, Kian Sek (2011) A mechatronic system for achieving optimum alignment of lower limb prosthesis. Doctoral thesis, University of Leeds.
Tee, Kian Sek (2007) A training model of an automated storage and retrieval system (AS/RS) with customized warehouse management system (WMS). Masters thesis, Universiti Tun Hussein Onn Malaysia.
Tee, Swee Yin (2008) Energy efficient building : the application of thermal energy storage (TES) for cooling load reduction. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Tee, Swee Yin (2008) Energy efficient building: the application of thermal energy storage (TES) for cooling load reduction. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Thong, Kok Tung (2016) Hardware development for MURoC rope climbing robot using sloth method. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Tsen, Vui Hin (2018) Design and development of an automated metered dose inhaler (MDI) for asthmatic patient. Masters thesis, Universiti Tun Hussein Malaysia.
W.Nawang, W. Khairuzaman (2003) Pembangunan manual proses pemesinan wire cut: Program Kejuruteraan Mekanikal KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
W.Nawang, W.Khairuzaman (2003) Pembangunan manual proses pemesinan wire cut: program kejuruteraan mekanikal KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Wan Abas, Wan Hamidah (2014) Online position control system using incremental fuzzy control. Masters thesis, Universiti Tun Hussein Malaysia.
Wan Hassan, Wan Azizurrahman (2014) Reverse engineering of micro light aircraft systems and design. Masters thesis, Universiti Tun Hussein Malaysia.
Wan Mansor, Wan Hilmi (2002) Hubungkait antara sikap dan pengetahuan pelajar kejuruteraan awam terhadap amalan keselamatan di bengkel perkayuan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Wan Mansor, Wan Nurdiyana (2006) Design of heat exchanger network using pinch method. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Wan Mohd, Wan Syahidah (2013) Linear quadratic gaussian (LQG) controller design for servo motor. Masters thesis, Universiti Tun Hussein Malaysia.
Wu, Jia Hang (2014) Maximum torque of combination threats for spur gear based on AGMA and JGMA standards. Masters thesis, Universiti Tun Hussein Malaysia.
Yaacob, Zaihar (2005) Successive over relaxation technique for steady state and dynamic characteristics of a cylindrical bore bearing. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Yahaya, Mohd Zubir (2013) Evaluation of heat exchanger on thermoacoustic performance. Masters thesis, Universiti Tun Hussein Malaysia.
Yaqub, Muhammad Atif (2013) Multi fingered robot hand in industrial robot application using tele-operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Yaziz, Nor Hidayah (2014) Digital speed and position control system incorporating an Incremental encoder. Masters thesis, Universiti Tun Hussein Malaysia.
Yusof, Mohd Khairul Azhar (2014) Amalan keselamatan bengkel dalam kalangan pelajar Kolej Vokasional Temerloh. Masters thesis, Universiti Tun Hussein Malaysia.
Yusoff, Mohd Faizal (2003) Persepsi Pelajar Diploma Kejuruteraan Awam, KUiTTHO terhadap manual pengendalian dan penyelenggaraan mesin pengetaman kayu. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Yusop, Yusmarnita (2004) A study in industrial robot programming. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Zakaria, Hanis (2019) Analysis of rbd palm olein abrasive blasting as new metal surface cleaning method. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.
Zargoun, Ahmed Muftah Ali (2014) Phone virtual environment for RC assistive robot. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Zawawi, Mukmin (2008) Alarm design for SCADA system of assembly CELL-200 trainer. Masters thesis, Universiti Tun Hussein Malaysia.
Zolkifli, Nur Syazlin (2022) An implementation of regional descriptor and line roi in development of semi-automated strabismus detection system. Masters thesis, Universiti Tun Hussein Onn Malaysia.
Zulkifli, Hasliza (2004) Penghasilan manual prosedur kerja amali perpaipan, Jabatan Pendidlkan Teknik Dan Vokasional, Fakulti Teknologi Kejuruteraan, KUiTTHO. Masters thesis, Kolej Universiti Teknologi Tun Hussein Onn.
Other
Zakaria, Sazalina and R. Ahmad, Radin Diana and Abbas, Ahmad Rosly and Mohideen Batcha, Mohd Faizal and Zanil, Mohd Fauzi (2021) Stochastic type-2 fuzzy modelling on GHG emission prediction for gas-fired power plant. IOP.