Items where Year is 2015

Up a level
Export as [feed] Atom [feed] RSS 1.0 [feed] RSS 2.0
Group by: Creators | Item Type | No Grouping
Jump to: . | A | B | C | D | E | F | G | H | I | J | K | L | M | N | O | P | R | S | T | U | V | W | Y | Z
Number of items: 367.

.

., Sulistyo (2015) Production of single cell anode-supported SOFC using NiO/YSZ-YSZ-LSM/YSZ powder materials. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

.Kh. Eljugmani, Ahmed Saeed (2015) Development of portable 10 stages Marx Generator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A

A Aziz, N A and Jayasuriya, N and L, Fan (2015) Adsorption study on Moringa Oleifera Seeds and Musa Cavendish as natural water purification agents for removal of lead, nickel and cadmium from drinking water. IOP Conference Series: Materials Science and Engineering, 136. pp. 1-9. ISSN 1757-8981

A. B., Mohd Fadzelly and A.Z, Zaleha and M., Hasmadi and M, Lusia Barek (2015) Effect of different drying methods on phytochemicals and antioxidant properties of unfermented and fermented teas from Sabah Snake Grass (Clinacanthus nutans Lind.) leaves. International Food Research Journal, 22 (2). p. 661. ISSN 1985-4668

Ab Aziz, Nur Adila and Jayasuriya, Niranjali and Fan, Linhua (2015) Application of Moringa oleifera seeds and Musa cavendish as coagulants for lead, nickel and cadmium removal from drinking water. IOP Conference Series: Materials Science and Engineering (MSE), 136 (1). pp. 1774-1781. ISSN 1757-8981

Ab Ghafar, Fauzi (2015) Driving cycle for small and medium duty engine case study of Ipoh. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abas, M. A. and Muhamad Said, M. F. and Zainal Abidin, S. F. and Zahari, I. (2015) Simulation of fuel economy for Malaysian urban driving. International Journal of Automotive and Mechanical Engineering (IJAME), 11. pp. 2306-2316. ISSN 2229-8649

Abas, Nor Haslinda (2015) Development of a Knowledge-Based Energy Damage for evaluating Industrialised Building Systems (IBS) Occupational Health and Safety (OHS) Risk. Doctoral thesis, RMIT University.

Abd Hadi, Syahrunniza (2015) Experimental study of the bio-additives in biodiesel fuel on performance and emissions characteristics of diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Halip, Juliana and Ibrahim, Azmi and Abdan, Khalina and Bakar, Edi Suhaimi and Karimi, Alinaghi and M. Tahir, Paridah and Choo, Adrian Cheng Yong (2015) Pre-drying optimization of oil palm veneers by response surface methodology. European Journal of Wood and Wood Products, 73 (4). pp. 493-498. ISSN 0018-3768

Abd Halip, Juliana and M. T., Paridah and Zaidon, A. and Abdul Khalil, H. P. S. (2015) Nonwood-based composites. Current Forestry Reports, 1. pp. 221-238. ISSN 2198-6436

Abd Rahim, Mohamad Hafiz (2015) Lightning effects on underground distribution cable using alternative transient program. Post-Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rahman, Junita (2015) Relationship between decomposition level and induced solidification of peat based on laboratory investigation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Mahmad Ameran, Hanis Liyana and Abdullah, Jaafar and Mohamad, Mimi Mohaffyza and Hashim, Hairulazwan and Abd. Shaib, Mohd Fadzli and Marwa, Omar Mohd. Faizan (2015) Miniature parallel ECT: a preliminary study using comsol. Jurnal Teknologi, 77 (17). pp. 37-41. ISSN 2180–3722

Abd Rashid, Wan Norhisyam and Mohamad, Elmy Johana and Abdul Rahim, Ruzairi and Mahmad Ameran, Hanis Liyana and Abdullah, Jaafar and Mohamad, Mimi Mohaffyza and Hashim, Hairulazwan and Shaib, Mohd Fadzli and Marwah, Omar Mohd. Faizan (2015) Miniature parallel ECT: a preliminary study using COMSOL. Jurnal Teknologi, 77 (17). pp. 37-41. ISSN 2180–3722

Abd. Rahman, Noor Amizan and Abdul Rahim, Ruzairi and Mohd Nawi, Abdullah and Leow, Pei Ling and Pusppanathan, Jaysuman and Mohamad, Elmy Johana and Chan, Kok Seong and Mohammad Din, Shahrulnizahani and Nor Ayob, Nor Muzakkir and Mohd Yunus, Fazlul Rahman (2015) A review on electrical capacitance tomography sensor development. Jurnal Teknologi (Sciences & Engineering), 73 (3). pp. 35-41. ISSN 2180–3722

Abdalla Musbah, Fadia (2015) The relationships between nurse care, attitude of patient and nurse with cancer patient satisfaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul, Mohd Rizan (2015) Performance study on the effect of different exhaust length for motorcycle engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Awal, A.S.M. and Shehu, I.A. (2015) Performance evaluation of concrete containing high volume palm oil fuel ash exposed to elevated temperature. Construction and Building Materials, 76 (NIL). pp. 214-221. ISSN 0950-0618

Abdul Awal, A.S.M. and Shehu, I.A. and Ismail, Mohammad (2015) Effect of cooling regime on the residual performance of high-volume palm oil fuel ash concrete exposed to high temperatures. Construction and Building Materials, 98 (NIL). pp. 875-883. ISSN 0950-0618

Abdul Halim, Nor Hayatie (2015) Hubungan antara tahap keselamatan dengan disiplin dan stres kerja dalam kalangan pekerja industri. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Haq, Raezul Haq (2015) Characterization and development of polycaprolactone (PCL)/montmorillonite (MMT)/hydroxapaptite (HA) nano-composites for fused deposition modelling (FDM) process. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Jamil, M. Mahadi and Wan Mahmud, Wan Mahani Hafiza and Oussama, Laghouiter (2015) Image segmentation techniques for redblood cell : on overview. Jurnal Teknologi, 77 (6). pp. 71-75. ISSN 21803722

Abdul Jamil, Muhammad Mahadi and Hanafi, Dirman and Ahmad, M.K.I and KSM Kader Ibrahim, Babul Salam and .Rahman, K.A.A. (2015) Framework of lower-limb musculoskeletal modeling for FES control system development. International Journal of Integrated Engineering, 7 (3). pp. 1-14. ISSN 2229-838X

Abdul Kadir, Aeslina and Abbas, Mohajerani (2015) Effect of heating rate on gas emissions and properties of fired clay bricks and fired clay bricks incorporated with cigarette butts. Applied Clay Science, 104. pp. 269-276. ISSN 1691317

Abdul Kadir, Aeslina and Hasni, Amirul Fahmi and Sarani, Noor Amira (2015) Marine debris composition in Batu Pahat, Johor: a comparison between Sungai Lurus and Minyak Beku beaches. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6553-6557. ISSN 1819-6608

Abdul Kadir, Aeslina and Hinta, Hermawati and Sarani, Noor Amira (2015) The utilization of coffee waste into fired clay brick. ARPN Journal of Engineering and Applied Sciences, 10 (15). pp. 6289-6292. ISSN 1819-6608

Abdul Kadir, Aeslina and Yahya, Zarina and Hussin, Kamarudin and Liew, Yun Ming and Abdullah, Mohd Mustafa Al Bakri and Deraman, Laila Mardiah (2015) Utilization of bottom ash for alkali-activated (SI-AL) materials: a review. ARPN Journal of Engineering and Applied Sciences, 10 (18). pp. 8351-8357. ISSN 1819-6608

Abdul Khalid, Nur khalida (2015) Frequency selective surface (FSS) for cellular signals shelding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Lateef, Ahmed (2015) Dynamic channel selection for meshed wireless personal area network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latif, Noradila (2015) Effect of strain rates on tensile properties and fracture toughness determination of extruded Mg-Al-Zn alloys. Doctoral thesis, Universiti Kebangsaan Malaysia.

Abdul Rashid, Azrin Hani (2015) Low velocity impact response of laminated textile coir-aramids/epoxy hybrid composites subjected to transverse penetration loading. Doctoral thesis, Universiti Sains Malaysia.

Abdul Wahab, Nur Bahiyah (2015) Pembangunan kit rimba berorientasikan elemen Sekolah Rimba Malaysia bagi peningkatan kompetensi sains murid Orang Asli. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul-Jabbar, Yasir Amer (2015) An implementation of peak to average power ratio reduction for multicarrier system (orthogonal frequency division multiplexing). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhameed, Mohammed (2015) Analytical approach to unidirectional flow of non-Newtonian fluids of differential type. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulhasan, Raed Abdulkareem (2015) Design of microstrip ultra wide band antenna with two notch filters for wireless communication. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Ahmad Faisal (2015) Gait pattern detection for amputated prosthetic using fuzzy algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Mohd Shahrir (2015) Faktor-faktor yang mempengaruhi pelajar-pelajar Diploma Kejuruteraan Politeknik dalam menceburi dalam bidang keusahawanan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Qazwan (2015) Design multilayer bandpass filter using hairpin resonator for digital broadcasting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Saif Khalid (2015) Generating UML class diagram from source codes using multi-threading technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Zulaikha (2015) Fabrication of 316L stainless steel (SS316L) foam via powder compaction method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdulmonim, Dhafer Abdulameer (2015) A comparative analysis of web-based GIS applications using usability metrics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Amnani (2015) Intergrated leachate treatment by sequencing batch reactor (SBR) and micro-zeolite (MZ). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Hizal (2015) Fast transient simulation of IEEE recommended surge arrester model on a transmission line using alternative transient program (ATP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Bakar, Mohd Fadzelly and Abdul Karim, Fifilyana and Perisamy, Eeswari (2015) Comparison of phytochemicals and antioxidant properties of different fruit parts of selected artocarpus species from Sabah, Malaysia. Sains Malaysiana, 44 (3). pp. 355-363. ISSN 1266039

Abu Bakar, Mohd Fadzelly and Abdul Karim, Fifilyana and Suleiman, Monica and Isha, Azizul (2015) Phytochemical constituents, antioxidant and antiproliferative properties of a Liverwort, Lepidozia borneensis Stephani from Mount Kinabalu, Sabah, Malaysia. Evidence-Based Complementary and Alternative Medicine. pp. 1-9. ISSN 1741-427X

Abu Bakar, Mohd Fadzelly and Ahmad, Nor Ezani and Suleiman, Monica and Rahmat, Asmah and Isha, Azizul (2015) Garcinia Dulcis fruit extract induced Cytotoxicity and Apoptosis in HepG2 liver cancer cell line. BioMed Research International, 10 (1). pp. 1-10. ISSN 2314-6133

Abu Bakar, Mohd Fadzelly and Lee, Angelina Mei Ling and Yasir, Suhaimi and Matanjun, Patricia (2015) Effect of different drying techniques on the phytochemical content and antioxidant activity of kappaphycus alvarezii. Journal Of Applied Phycology, 27 (4). pp. 1717-1723. ISSN 9218971

Abu Hassan, Rozi Roslinda (2015) EEG signal classification for wheelchair control application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abu Seman, Noor Aslinda and Zakuan, Norhayati and Mat Saman, Muhamad Zameri and Md Ariff, Mohd Shoki and Sulaiman, Zuraidah (2015) A study of green supply chain management, green innovation and environmental performance among Malaysian manufacturing companies. International Journal of Applied Engineering Research, 10 (89). pp. 58-62. ISSN 0973-4562

Abu Zarida, Abdallah Ali (2015) Investigation of film cooling effectiveness from cylindrical cooling hole with anti vortex generator by numerical simulation. Masters thesis, UTHM.

Adamu, Muhammad Sani (2015) The relationship between corporate social responsibility and company's financial performance: the case of Top One Hundred Companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adamu, Muhammad Sani (2015) The relationship between corporate social responsibility and company's financial performance: the case of Top One Hundred Companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Adon, Mohamad Nazib (2015) Pulse electric field exposure effect on morphological properties of HeLa cells. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Agam, Mohd Arif and Kamarulzaman, Robijah (2015) Genius Menggapai PhD. Penerbit UTHM. ISBN 978-967-0764-16-0

Ahad, Rosnee (2015) Development of Brain Computer Interface (BCI) system for integration with Functional Electrical Stimulation (FES) application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, A.N. Aizat and Hasan, Sulaiman and Husin, Nofafifah (2015) Cyber value stream system reduced waste and non-value added of manufacturing operation. International Journal of Advancements in Mechanical and Aeronautical Engineering, 2 (2). pp. 205-208. ISSN 2372-4153

Ahmad, H and M Semangun, Julian and R Azzuhri, Saaidal and Zulkifli, M Z and Awang, N A and Harun, S W (2015) Passively mode-locked laser using an entirely centred erbium-doped fiber. Laser Physics, 25 (4). pp. 1-4. ISSN 1054-660X

Ahmad, Hairilasri (2015) Optimisation of insulator design for improved electric field performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad, Nurul 'Atiqah (2015) Development of an electromagnetic numerical solver based on the finite difference time domain (FDTD) technique for research and teaching purposes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmad Shah, Shahrizan (2015) Development of back-to-back converter with power transfer control using raspberry Pi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed, Mustafa Sami (2015) Optimization of coded signals based on wavelet neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Mustafa, Esam Mohamed (2015) Impact of total quality management practices on innovation in service organizations. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ajeel Aljebur, Raheem Kadhim (2015) The effect of various types of building roof materials on the cooling load. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Akasah, Zainal Abidin and Alias, Maizam and Ramli, Azuin (2015) Architectural building safety and health performance model for stratified low-cost housing: education and management tool for building managers. International Journal of Structural and Construction Engineering, 9 (4). pp. 472-480. ISSN 1881-8153

Akasah, Zainal Abidin and Amirudin, Roslan (2015) Maintenance management process model for school buildings: an application of IDEF0 modelling methodology. Australian Journal of Civil Engineering, 8 (1). pp. 1-6. ISSN 1448-8353

Alakashi, Abobaker Mohammed (2015) The development of dedicated CFD solver for aerodynamic analysis on internal and external flow. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Albishti, Abobaker A Mohammed (2015) Dual band dipole antenna with harmonic suppression capability. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Hafiz Aizat (2015) Comparison fine spray nozzle for two phase flow within experimental and simulation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Mahazani (2015) Developing the knowledge-based human resources that support the implementation of the National Dual Training System (NDTS): evaluation of TVET teacher's competency at MARA Training Institutions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Munasar Abdirahman (2015) Design of fractal minkowski diversity antenna for LTE and WIFI application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali, Siti Hajar Aminah (2015) Incremental learning for large-scale stream data and its application to cybersecurity. Doctoral thesis, Kobe University.

Ali Almukhtar, Isa (2015) Solar water heating system in libyan buildings. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ali Awaleh, Abdisamad (2015) Design and characterization of flat lens antenna using aperture-coupled microstrip patches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alija, Amani Saleh (2015) Analysis of Dijkstra’s and A* algorithm to find the shortest path. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Alimi, Zainal Abidin (2015) The auto assist bar system for disabled people. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Almelian, Mohamad Milood (2015) Optimal design of passive filter to mitigate harmonic in power frequency. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ameran, H. L. M. and Mohamad, E. J. and A. Rahim, R. and A. Rashid, W. N. and Mohamad, M. M. and Hashim, H. and Zakaria, Z. and Shaib, M. F. and Marwah, O. M. F. (2015) Velocity measurement simulative study of twin plane ECT using advanced cross correlation technique. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8960-8965. ISSN 1819-6608

Anak Emparan, Quin (2015) Bioremediation of biodiesel and diesel contaminated soil by pseudomonas putida. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Araby, Sherif and Meng, Qingshi and Zhang, Liqun and Zaman, Izzuddin and Majewski, Peter and Ma, Jun (2015) Elastomeric composites based on carbon nanomaterials. Nanotechnology, 26. pp. 1-23. ISSN 0957-4484

Arifin, Mohd Zuhair Azuar (2015) Tahap kesedaran teknologi hijau dalam kalangan guru-guru Teknologi Kejuruteraan Zon Utara. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Asman, Saliza (2015) Adsorption behaviour of molecularly imprinted-beta-cyclodextrin polymers prepared by reversible addition-fragmentation chain transfer (RAFT) polymerization for selective recognition of benzylparaben. Doctoral thesis, Universiti Malaya.

Awang, Mohd Naim (2015) A study of 2-stroke marine diesel engine characteristic based on condition based maintenance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azizan, Mohd Syukur (2015) Development of differential evolution based Power System Stabilizer (PSS) with HVDC in small signal stability analysis using MATLAB. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Baharom, Md Nor Ramdon and Mahmod, Luqman Hakim and Zainal, Zainab and Ullah, Irshad and Ali, Irfan (2015) Improvement of the SAG ampacity carrying level of existing 275 KV overhead line tower by using the re-conductoring approach. ARPN Journal of Engineering and Applied Sciences, 10 (19). pp. 8547-8555. ISSN 1819-6608

Baharom, Nor Azurah (2015) Analysis of electrooculography (EOG) for controlling wheelchair motion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bahr Ennil, Ali S. and M. Elfaghi, Abdulhafid (2015) Numerical simulation of film cooling over flat plate. ARPN Journal of Engineering and Applied Sciences, 10 (6). pp. 2518-2522. ISSN 1819-6608

Bakhit Mabrouk, Wafi Adam (2015) Development of mathematical model for monorail suspension system under different track conditions. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bala, J. D. and Kuta,, F. A. and Abioye, O. P. and Adabar, N.U. and Abdulsalam, R. and Adelere, I. A. and Al-Gheethi, Adel A. and Kaizar, H. and Ademujimi, M. M. (2015) Isolation and characterisation of microorganisms contaminating herbal infusion sold in Minna, Nigeria. Journal of Science, Technology, Mathematics and Education (JOSTMED), 13 (2). pp. 10-15.

Buhari, Alunawati (2015) Pembangunan kemahiran kerja berpasukan menerusi kokurikulum sukan hoki dalam kalangan pelajar UTHM. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Burhan, Mohd Hafiz (2015) Design and fabricating of an orthotic insole by using Kinect® XBOX gaming sensor scanner and 3D printer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

C

Chan, B.L. and Lajis, M.A. (2015) Direct recycling of aluminium 6061 chip through cold compression. International Journal of Engineering and Technology (IJET), 15 (4). pp. 43-47. ISSN 0975-4024

Chan, Chee Ming (2015) Pseudo-solidification of dredged marine soils with cement - fly ash for reuse in coastal development. WSEAS Transactions on Environment and Development, 11. pp. 173-181. ISSN 2224-3496

Chan, Kok Seong and Pusppanathan, Jaysuman and Abdul Rahim, Ruzairi and Susiapan, Yvette Shaan-Li and Phang, Fatin Aliah and Rahiman, Mohd Hafiz Fazalul and Awang, Zubaidah and Ahmad, Anita and Abdul Wahid, Herman and Mohamad, Elmy Johana and Ridzuan Aw, Suzanna (2015) Mobile electrical capacitance tomography (ECT) development for liquid-gas flow measurement. Jurnal Teknologi, 73 (3). pp. 29-33. ISSN 2180–3722

Che Hassan, Farah Hazwani (2015) Analysis of robot localisation performance based on extended kalman filter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Hassan, Yuhanis (2015) Pengetahuan, sikap dan kesedaran pensyarah dalam pengamalan penyelidikan di politeknik premier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Che Him, Norziha (2015) Potential for using climate forecasts in spatio-temporal prediction of dengue fever incidence in Malaysia submitted. Doctoral thesis, University of Exeter.

Che Mat Zin, Roslidawati (2015) Penerbitan modul pembangunan kemahiran generik berlandaskan origami. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Chin, Soon and Ahmad, Mohd Khairul and Mohd Fazli, Fatin Izyani and Abd Hamed, Noor Kamalia and Hamidi, Indah Fitriani and Khalid, Noor Sakinah (2015) Application of TIO2 nanostructure using hydrothermal method for waste water treatment. ARPN Journal of Engineering and Applied Sciences, 10 (20). pp. 9736-9738. ISSN 1819-6608

Chua, Qing Shi (2015) Optimal voltage stability assessment based on voltage stability indices and artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Cokilavany, R. and Ven Venkatesan, R. and J. Kavikumar, J. Kavikumar (2015) Fuzzy !-automata and its relationships. International Journal of Pure and Applied Mathematics, 99 (1). pp. 23-36. ISSN 1311-8080

Cokilavany, R. and Venkatesan, R. and Kavikumar, J. (2015) Fuzzy !-automata and its relationships. International Journal of Pure and Applied Mathematics, 99 (1). pp. 23-36. ISSN 1311-8080

D

David, Maricel Cuevas (2015) The potential and promotion of entotourism in Gunung Ledang, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dhaya Nor, Beshar (2015) Comparative analysis of software reusability attributes in web and mobile applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Dorairaju, Hemarani (2015) Investigation of cutting temperature and cutting force from mist flow pattern in MQL technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

E

Elfaghi, Abdulhafid and Omar, Ashraf Ali and Asrar, Waqar (2015) Higher-Order Compact-Flow Field-Dependent Variation (HOC-FDV) method for solving two dimensional navier-stokes equation. International Journal for Computational Methods in Engineering Science and Mechanics, 16. pp. 256-263.

Elmi Gure, Abdirahman (2015) Design rectenna for wireless energy harvesting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

F

Fauzi, Noor Akhmazillah and Mohammed, M. Farid (2015) High-pressure processing of Manuka honey: brown pigment formation, improvement of antibacterial activity and hydroxymethylfurfural content. International Journal of Food Science and Technology, 1 (178). pp. 1-8. ISSN 0950-5423

Fulazzaky, Mohamad Ali and Abdullah, Shakila and Salima, Mohd Razman (2015) Fundamentals of mass transfer and kinetics for biosorption of oil and grease from agro-food industrial effluent by Serratia marcescens SA30. RSC Advances, 5. pp. 104666-104673. ISSN 2046-2069

G

Gambo, M.M. and Gomez, C.P. (2015) Project characteristics for design and build procurement in Malaysian construction industry. Journal of Engineering and Technology, 6 (1). pp. 144-154. ISSN 2180-3811

Gambo, Muhammad Mustapha (2015) Best value model for public private partnership infrastructure projects in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ghazalan, Mohd Shahzuan (2015) Tahap kesediaan peserta Program Pembelajaran Sepanjang Hayat (PSH) dalam kecenderungan menceburi keusahawanan di Kolej Komuniti Negeri Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Mohd Hafiz (2015) New design of tuned vibration absorber for wide frequency range application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Suraya (2015) Prediction of indoor environmental parameters for naturally ventilated building using artificial neural network: a reflection of outdoor parameters. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Suraya (2015) Prediction of indoor environmental parameters for naturally ventilated building using artificial neural network: a reflection of outdoor parameters. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Gisip, Imelda Albert and Harun, Amran (2015) Brand culture: its antecedents and relationship to SME brand performance. International Journal of Administration and Governance, 1 (12). pp. 1-7. ISSN 2077-4486

Goh, Wan Inn (2015) Structural behaviour of precast lightweight foamed concrete sandwich panel (PLFP) with shear truss connectors. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

H

H Abdlkarem, Najla. (2015) Design of graphical user interface for multiuser SAC-OCDMA performance analysis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

H.M Alzoubi, Amera (2015) Comparative analysis of image search algorithm using average RGB, local color histogram, global color histogram and color moment HSV. Masters thesis, Universiti Tun Hussein Onn Malaysia.

HUSSEIN, AMEER SALEH (2015) The effect of pre-processing techniques and optimal parameters on BPNN for data classification. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hadi Kadim, Ilham Abdul (2015) Study the electrical stress withstand properties of heated refined bleached and deodorized palm oil dielectrics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hadipramana, Josef (2015) Impact resistance of foamed concrete slab and its modifications subjected to hemispherical impactor. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamid, Hashima (2015) Continuous improvement CSF framework for assessing CI maturity in ISO and non-ISO certified construction contracting organizations. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hanafi., Suhaili (2015) Kesediaan pelajar dari aspek kemahiran teknikal terhadap pembentukan kebolehkerjaan di Kolej Vokasional Wilayah Selatan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hariri, Azian (2015) The development of welding fumes health risk assessment tool for automotive component related industries. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Harun, Amran and Liew, Toh Soon and Mohd Kassim, Abdul Wahid and Sulong, Rini Suryati (2015) Smartphone dependency and its impact on purchase behavior. Asian Social Science, 11 (26). pp. 196-211. ISSN 1911-2017

Harun, Amran and Sikul, Razinah and Mohtar, Tini Maizura and Datu Eranza, Datu Razali (2015) Factors influencing job performance: a case study amongst teaching staff in Kota Kinabalu Polytechnic. Malaysian Journal of Business and Economics, 2 (2). 41 -58. ISSN 2289-6856

Hasan, Haslinda and Harun, Amran and Zainal Rashid, Mohd Shaffran (2015) Factors influencing online purchase intention in online brand. International Journal of Business Management & Research (IJBMR), 5 (5). pp. 63-72. ISSN 2249-6920

Hasan, S. and Ahmad, A. N. A. and Feriyanto, D. (2015) Computerized value stream system (CVSS) to reduce waste in lean manufacturing operation. International Journal of Innovation in Mechanical Engineering & Advanced Materials, 1 (1). pp. 13-18. ISSN 2477-541X

Hasan, Sulaiman and Ahmad, A.N. Aizat and Feriyanto, Dafit (2015) Computerized value stream system (CVSS) untuk mengurangi limbah pada operasi lean manufaktur. Jurnal PASTI (Penelitian dan Aplikasi Sistem dan Teknik Industri), 9 (1). pp. 61-71. ISSN 2085-5869

Hasan, Zahari (2015) Design and implementation of multiple user mobile robot following system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hashemi, Fariborz and Md Tahir, Paridah and Madsen, Bo and Jawaid, M and Majid, DL and Brancheriau, Loı¨c and AH, Juliana (2015) Volumetric composition and shear strength evaluation of pultruded hybrid kenaf/glass fiber composites. Journal of Composite Materials, 50 (17). pp. 2291-2303. ISSN 0021-9983

Hashim, Abdul Hadi (2015) Modelling traceability of KTMB train passenger. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Abdullahi Mohamud (2015) A robust digital image watermarking using repetition codes against common attacks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Mahadi (2015) Simulation of haddad surge arrester model on a 132kV overhead transmission line for back flashover analysis using Alternative Transient Program (ATP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Nur Farha (2015) Pemahaman pelajar melalui aplikasi teal (technology enable active learning) dalam pembelajaran amali. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, Zulkarnain and Shamsudin, Supiah and Harun, Sobri and Abdul Malek, Marlinda and Hamidon, Nuramidah (2015) Suitability of ANN applied as a hydrological model coupled with statistical downscaling model: a case study in the northern area of Peninsular Malaysia. Environmental Earth Science, 74. pp. 463-477. ISSN 1866-6280

Hassan Muhamad, Zainab (2015) Comparative analysis for performance measurements of software testing between mobile applications and web applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hassan Saeed, Waddah Waheeb (2015) The performance of soft computing techniques on content-based SMS spam filtering. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hubadillah, Siti Khadijah (2015) Study on the gas performance of ceramic membrane from kaolin prepared by phase inversion technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussain Talpur, Kashif (2015) Improvement of fuzzy neural network using mine blast algorithm for classification of Malaysian Small Medium Enterprises based on strength. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hussin, Rosniza and Kwang, Leong Choy and Xianghui, Hou (2015) The effect of substrate on TiO2 thin films deposited by atomic layer deposition (ALD). Advanced Materials Research, 1087. pp. 147-151. ISSN 1022-6680

I

Ibrahem Salih, Adnan and Abdelouhahab, Abid and A. Mostafa, Salama and Zaiter, Mohammed Joudah (2015) Updating the NCTUns-6.0 tool to simulate parallel optical burst switching of all-optical ultra-dense WDM systems. Photonic Network Communications, 29 (1). pp. 106-117. ISSN 1387-974X

Ibrahim, Anis Nabihah (2015) Design of microstrip antenna based on different material properties. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Nor Zaidatun Nadrah (2015) Crosstalk suppression techniques for multi-channel regeneration based on fiber optic parametic amplifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Siti Aida (2015) Development of titanium dioxide nanoparticles/nanosolution for photocatalytic activity. Doctoral thesis, Universiti Sains Malaysia.

Ibrahim Jahun, Kabiru (2015) Development of triple band planar inverted-H antenna for DCS, WIMAX and WLAN application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Mohd Azli (2015) Vibration simulation of a simply-supported beam with attached multiple absorbers. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idris, Muhammad Ridzuan (2015) Effects of chromium powder mixed in electrical discharge machining of AISI D2 hardened steels. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Idrus, Nur Asfarina (2015) The performance of directional flooding routing protocol for underwater sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ilmin, Siti Syazwani (2015) Study of mouthguard design for endurance and air-flow enhancement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Imbargk Ebra, Zuher Mesken (2015) Localizatation estimation usign the technique of multi-sequence positioning. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Isa, Khalid (2015) Homeostatic-inspired controller algorithm for a hybrid-driven autonomous underwater glider. Doctoral thesis, Universiti Sains Malaysia.

Isha Mudin, Azim (2015) Emission characteristic of small diesel engine fuelled by preheat biodiesel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishak, Rohaidah (2015) Hubungan burnout dengan kepuasan kerja dalam kalangan guru-guru Kemahiran Hidup Bersepadu (KHB) sekolah menengah di Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Affero and Nasir, Suriana and Hassan, Razali and Masek, Alias (2015) Investigating the roles of supervisory working alliance as mediator for overall supervision effective using structural equation modeling. Advanced Science Letters, 21. pp. 1-5. ISSN 1936-6612

Ismail, Al Emran and Che Abdul Aziz, M.A. (2015) Tensile strength of woven yarn kenaf fiber reinforced polyester composites. Journal of Mechanical Engineering and Sciences (JMES), 9. pp. 1695-1704. ISSN 2289-4659

Ismail, Fatimah (2015) Kemahiran menvisualisasi ruang dalam kalangan pelajar bagi mata pelajaran Pendidikan Seni Visual. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Irwan Mahazir (2015) Pembangunan dan pengujian prototaip pembelajaran mobile berasaskan prestasi (MOBICAD) dalam kursus reka bentuk berbantu komputer (CAD). Doctoral thesis, Universiti Kebangsaan Malaysia.

Ismail, Mohd Erfy (2015) Permodelan faktor-faktor pencapaian Sains TIMSS Malaysia 2011. Doctoral thesis, Universiti Sains Malaysia.

Ismail, Mohd Norasri and Ibrahim, Rosziati and Md. Fudzee, Mohd Farhan and Jofri, Muhammad Hanif (2015) SLA-based content adaptation framework for optimizing QoE and energy consumption. ARPN Journal of Engineering and Applied Sciences, 10 (2). pp. 643-651. ISSN 1819-6608

Ismail, Nurul Ashikin (2015) Etnoentomologi dalam kalangan kaum Orang Asli dan Melayu di Semenanjung Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Siti Nor Ainsyah (2015) Penguasaan teknik kemahiran fasilitator dalam pelaksanaan pembelajaran berpusatkan pelajar di Universiti Tun Hussein Onn Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Iye, Onalo Joan (2015) Bioremediation of heavy metal polluted water using immobilized freshwater green microalga, botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

J

Jalani, Noor Hisham (2015) Kecekapan pembelajaran berasaskan model contoh-masalah dalam pembelajaran teori litar. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, Azlis-Sani and Zaid, Muhammad Firdaus and Yahya, Musli Nizam and S. M. Ismail, S. M. Sabri and Ahmad Tajedi, Noor Aqilah and Abdul Aziz, Roseni and Md Zein, Raemy (2015) Evaluation of whole body vibration and back pain problem among Light Rapid Transit (LRT) drivers. Applied Mechanics and Materials, 773-77. pp. 845-849. ISSN 1662-7482

Jamaluddin, Mohd Fakhrul Razi (2015) Characteristic studies on types of paint spray for automotive parts in small and medium industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaludin, Mohamad Ikhwan and Abu Kasim, Nur Atikah and Mohamad Nor, Nor Hafiez and Ismail, Muhammad Hussain (2015) Development of porous Ti-6Al-4V mix with palm stearin binder by metal injection molding technique. American Journal of Applied Sciences, 12 (10). pp. 742-751.

Jamo, Hassan Usman (2015) Mechanical properties of ceramic tiles by replacement of quartz by RHA and POFA. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Joan Iye, Onalo (2015) Bioremediation of heavy metal polluted water using immobilized freshwater green microalga, botryococcus sp. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jumaat, Siti Amely (2015) Multi-facts devices installation for loss minimization and techno-economic impact assessment using EPSO approach. Doctoral thesis, Universiti Teknologi MARA.

K

Kamaludin, Hazalila and Mahdin, Hairulnizam and H. Abawajy, Jemal (2015) Filtering redundant data from RFID data streams. Journal of Sensors, 11 (1). pp. 1-7. ISSN 1687725X

Kamaruddin, Muhamad Khiril (2015) Influence of passenger car air conditioner system thermostat level setting to fuel consumption and thermal comfort. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamarudin, Kamarul Rahim and Mohamed Rehan, Maryam (2015) Morphological and molecular identification of Holothuria (Merthensiothuria) leucospilota and Stichopus horrens from Pangkor Island, Malaysia. Tropical Life Sciences Research, 26 (1). pp. 87-99. ISSN 1985-3718

Kamarudin, Kamarul Rahim and Usup, Gires and Hashim, Ridzwan and Mohamed Rehan, Maryam (2015) Sea cucumber (echinodermata: holothuroidea) species richness at selected localities in Malaysia. Pertanika Tropical Agricultural Science, 38 (1). pp. 7-32. ISSN 1511-3701

Kamsur, Nadzalinda (2015) Tahap penguasaan, sikap dan minat pelajar Kolej Kemahiran Tinggi MARA terhadap mata pelajaran Bahasa Inggeris. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kasim, Rozilah and Harir, Adamu Isa and Ishiyaku, Bala (2015) Resource potentials of composting the organic wastes stream from municipal solid wastes compositions arising in Nigerian cities. Journal of Geoscience and Environment Protection, 6 (10). pp. 10-15. ISSN 23274344

Kasim, Rozilah and Isa Harir, Adamu and Ishiyaku, Bala (2015) Exploring the resource recovery potentials of municipal solid waste: a review of solid wastes composting in developing countries. International Journal of Scientific and Research Publications, 5 (4). pp. 1-8. ISSN 2250-3153

Kasim, Rozilah and Muhammad, Maryam Salihu and Martin, David (2015) A review of residential segregation and its consequences in Nigeria. Mediterranean Journal of Social Sciences, 6 (2). pp. 376-384. ISSN 2039-2117

Kasim, Rozilah and Salihu Muhammad, Maryam and Martin, David (2015) An evaluation of factors influencing residential segregation in selected areas of Bauchi Metropolis, Northern Nigeria. Mediterranean Journal of Social Sciences, 6 (2). pp. 127-140. ISSN 2039-2117

Katiran, Norshidah (2015) Resource allocation in coordinated multipoint long term evolution-advanced networks. Doctoral thesis, Universiti Teknologi Malaysia.

Kesot, Mohd Jahaya and Akasah, Zainal Abidin and Alias, Maizam and Lashari, Tahira Anwar (2015) An affective-cognitive teaching and learning approach for enhanced behavioural engagements among engineering students. Engineering Education A Journal of the Higher Education Academy, 8 (2). pp. 65-76. ISSN 1750-0052

Khairi, Rihab Salah (2015) Artificial immune system based on real valued negative selection algorithms for anomaly detection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalifa, Mohamed Saleh (2015) Evaluation performance of OFDM system using the selected mapping technique for WIMAX technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kian, Meng Tan and Mohd Fauzi, Noor Akhmazillah and Mohd Kassim, Angzzas Sari and A. Razak, Aliff Hisyam and Kamarudin, Kamarul Rahim (2015) Isolation and identification of polystyrene degrading bacteria from zophobas morio’s gut. Walailak Journal Science & Technology, 18 (8). pp. 1-11.

L

Latif, Kamran (2015) New technique for the development of open CNC cell controller based on ISO 14649 and ISO 6983. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Liew Abdullah, Nurul Hidayah (2015) Kajian pemboleh-pemboleh ubah yang mempengaruhi aras pengetahuan, tindakan dan kesedaran murid sekolah rendah di Johor terhadap isu alam sekitar. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Huey Sia (2015) Fabrication of frequency selective structure and evaluation of microwave transmission on energy saving glass. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lim, Huey Sia (2015) Fabrication of frequency selective structure and evaluation of microwave transmission on energy saving glass. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Liwan, Siti Radziah (2015) The framework of improving on-site materials tracking for inventory management process in construction projects. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Low, Jia Wei (2015) The properties of sputtered copper oxide thin film for sensing application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M

M El-Aswad, Ashraf Mahmood (2015) Assessment of the effect of grain refinement on the solidification characteristics of Al-Si-Cu eutectic cast alloy using thermal analysis technical (CA-CCTA). Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. Yusup, Eliza (2015) Production of temporary bone scaffold reinforced with OPEFB-CMC from oil palm empty fruit bunch. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Main, Nor Mazlana and A. Talib, Rosnita and Ibrahim, Rushdan and Abdul Rahman, Russly and Mohamed, Ainun Zuriyati (2015) Linerboard made from Soda-Anthraquinone (Soda-AQ) treated coconut coir fiber and effect of pulp beating. BioResources, 10 (4). pp. 6975-6992. ISSN 1930-2126

Main, Nor Mazlana and A.Talib, Rosnita and Abdul Rahman, Russly and Mohamed, Ainun Zuriyati and Ibrahim, Rushdan and Adnan, Sharmiza (2015) Effect of amphoteric and cationic polyacrylamide on the structural and strength properties of coir paper. Procedia Manufacturing, 2. pp. 28-34. ISSN 2351-9789

Makhtar, Muhamad Azmi (2015) Kajian motivasi terhadap pelajar kolej vokasional dalam melaksanakan kerja-kerja kemahiran teknikal. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Malik Fesal, Siti Natasha (2015) Simulation of vortex induced vibration of a bluff body structure. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mamat, Ibrahim (2015) Development of three phase back to back converter with current flow control using raspberry Pi microcontroller. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mansur, Sity Aishah (2015) Extrapancreatic actions of incretin-based therapies on bone in diabetes mellitus. Doctoral thesis, University of South Australia.

Maricel, Cuevas David (2015) The potential and promotion of entotourism in Gunung Ledang, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Masrol, S.R. and Ibrahim, M.H.I. and Adnan, S. and Amir Shah, M.S.S. and Main, N.M. and Esa, M.F. and Othman, M.H. (2015) Effect of beating process to soda anthraquinone pulp of oil palm male flower spikes fibre. Applied Mechanics and Materials, 773. pp. 158-162. ISSN 1662-7482

Masrol, Shaiful Rizal and Ibrahim, Mohd Halim Irwan and Adnan, Sharmiza (2015) Chemi-mechanical pulping of durian rinds. Procedia Manufacturing, 2. pp. 171-180. ISSN 2351-9789

Masrom, Md Asrul Nasid and Abd Rahim, Mohd Hilmi Izwan and Mohamed, Sulzakimin and Yunus, Riduan (2015) Preliminary qualitative findings: challenges in large infrastructure projects towards development of innovative performance measurement. Applied Mechanics and Materials, 773-77. pp. 1012-1016. ISSN 1660-9336

Mat Jamil, Khamelrun Shah (2015) Development of portable solar generator. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mat Jubadi, Warsuzarina (2015) Modelling of advanced submicron gate InGaAs/InAIAs pHEMTS and RTD devices for very high frequency applications. Doctoral thesis, University of Manchester.

Mat Ripin, Mohd Khairi Haslamia (2015) Modelling and simulation of train schedule and operation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mayzan, Mohd Zul Hilmi (2015) Graphite immobilisation in glass composite materials. Doctoral thesis, University of Sheffield.

Md Akhir, Nor Solehah (2015) Risk level of factors causing construction waste generation throughout construction project life cycle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Ariffin, Khadijah (2015) Framework for the audit process implementation on public buildings. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Md Dan, Mohd Firdaus and Muhamad, Edy Tonnizam and Komoo, Ibrahim and Alel, Mohd Nur Asmawisham (2015) Physical characteristics of boulders formed in the tropically weathered granite. Jurnal Teknologi Science and Engineering, 72 (3). pp. 75-82. ISSN 01279696

Md Hasan, Sazali (2015) CFD simulation of the dynamic flow behavior in a bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Md Seri, Suzairin and Amirnordin, Shahrin Hisham and Woon, Qiu Yik and Hissein Didane, Djamal (2015) Effects of geometrical parameters to the performance of louvered fin heat exchangers. Applied Mechanics and Materials, 773-77. p. 398. ISSN 1660-9336

Md.Jizat, Nor Atikah (2015) Kompetensi pembimbing syarikat bertauliah Sistem Latihan Dual Nasional (SLDN). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mehda, Ayoub (2015) Development of P-resonant controller for Z-source three phase inverter. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meor Zainol, Wan Saidatulakma (2015) Analysis of electromyograph (EMG) for controlling wheelchair motion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mior Idris, Wan Nur Amalina (2015) Characterization of nanostructures ZnO synthesized through hydrothermal method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad, Elmy Johana and Mohmad Ameran, Hanis Liyana and Abdul Rahim, Ruzairi and Marwah, Omar Md. Faizan (2015) Electrical capacitance tomography (ECT): an improved sensitivity distribution using two-differential excitation technique. Jurnal Teknologi, 73 (1). pp. 43-50. ISSN 2180–3722 (Submitted)

Mohamad, M. M. and Sulaiman, N. L. and Sern, L. C. and Mohd Salleh, K. (2015) Measuring gender equality in technical and vocational education and training. Journal of Advanced Research Design, 12 (1). pp. 13-20. ISSN 2289-7984

Mohamad, Mimi Mohaffyza and Abu Bakar, Nabilah and Sulaiman, Nor Lisa and Mohd Salleh, Kahirol and Lai, Che Sern (2015) Applying standard competency assessment in vocational teaching practices. Asian Social Science, 11 (24). ISSN 1911-2017

Mohamad Redzuan, Nurul Adila (2015) Synthesis of molten salt as heat transfer fluid for waste heat recovery application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Shari, Mohd Hafiz (2015) Development of one cycle current controller using raspberry Pi for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Juliana (2015) An improved strategy to support multiple QoS assessment for selecting content adaptation services. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed, Mimi Nahariah Azwani (2015) Managing the complexities of English Language teaching in engineering. Doctoral thesis, University of Queensland.

Mohamed, Mohamed Asghaiyer (2015) Design of shunt active power filter to mitigate the harmonics caused by nonlinear loads. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Elbishti, Entsar Kouni Alhaj (2015) The degree of JIT in mineral oil and asphalt industries in Libya. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Hassan, Mohamud (2015) Quality of service (QoS) analysis frameworkn for text to speech (TTS) services. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Nasir, Noorhamizah and Huq, Mohammad Saiful and Mohamed Ramli, Norazan and KSM Kader, Babul Salam and Pah, Chin Hee and Tolos, Siti Marponga and Md Ghani, Nor Azura and Ahmad Kamaruddin, Saadi (2015) The quadriceps muscle of knee joint modelling using hybrid particle swarm optimization-neural network (PSO-NN). Journal of Physics: Conference Series, 819 (1). pp. 1-11. ISSN 1742-6596

Mohammad Azmi, Mohamad Azim (2015) Stabilization/solidification of lead contaminated soil using cement incorporated with sugarcane bagasse. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammadhosseini, Hossein and Abdul Awal, A S M and Ehsan, Abdul Haq (2015) Influence of palm oil fuel ash on fresh and mechanical properties of selfcompacting concrete. Sadhana, 40 (6). pp. 1989-1999. ISSN 0973-7677

Mohammed Ahmed, Adeb Ali (2015) Ofdm system cyclic prefix characteristic analaysis for wimax technology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Ashwal, Wadhah Abdo (2015) Compact planar wearable ultra wideband antenna for on-body applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Alduais, Nayef Abdulwahab (2015) The performance evaluation of different logical topologies and their respective protocols for wireless sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Ghawbar, Fayad Mohammed (2015) The influence of transmission range on the performance of Vehicular AD-HOC Network (VANET). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Kabir, Kaigama (2015) Safety compliance for hihg rise projects in Nigerian construction Industry. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd, Norhayati (2015) The effect of sintering temperature on potassium feldspar addition into claytan porcelain. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Ariff, Mohd Aifaa and Abhinav, Kumar Singh and Bikash, Chandra Pa (2015) Estimating dynamic model parameters for adaptive protection and control in power system. IEEE Transactions On Power Systems, 30 (2). pp. 829-839. ISSN 1558-0679

Mohd Ariffin, Ahmad Azrizal (2015) Pattern recognition for manufacturing process variation using integrated statistical process control – artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Asharuddin, Syazwani (2015) Optimization of biosorption process using cucumis melo rind for the removal of Fe, Mn and Pb ions from groundwater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fuzi, Siti Fatimah Zaharah and Md Illias, Rosli and Ghazali, Nazlee Faisal and Ismail, Ahmad Fauzi and Che Man, Rohaida (2015) Effects of the immobilization of recombinant Escherichia coli on cyclodextrin glucanotransferase (cgtase) excretion and cell viability. Biochemical Engineering Journal, 98 (15). pp. 91-98. ISSN 1369703X

Mohd Hanifa, Rafizah and Bahrudin, Ida Aryanie and Surip, Miswan and Ibrahim, Zuraida and Roslan, Rosfuzah and Alias, Maizam (2015) A framework for developing culture-based multi-modal mind games: improving social interaction skills of autistic children. Jurnal Teknologi (Sciences and Engineering), 75 (3). pp. 95-101. ISSN 2180–3722

Mohd Johary, Noor Aisyah (2015) Pengubah litar arus terus berasaskan perubahan kitaran kerja menggunakan pengawal mikro arduino. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Faridah Hanim and Miyauchi, Hajime and Yaakub, M. Faizal (2015) Application of slantlet transform based support vector machine for power quality detection and classification. Journal of Power and Energy Engineering,, 4 (215). pp. 215-223. ISSN 2327-5901

Mohd Noor, Faridatuljana and Harun, Hairuddin (2015) Phenomenological study: bilingual teaching classroom of Malaysian community colleges. Procedia - Social and Behavioral Sciences, 204. pp. 114-118. ISSN 1877-0428

Mohd Noor, Nazihah (2015) Analysis of vortex shedding in a various body shapes. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Nor 'Izzati (2015) Performance of multichannel fiber optic parametric amplifier. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noor, Siti Noor Fazelah (2015) Empowering the powerful: a critical discourse analysis of public discourse on graduate employability. Doctoral thesis, Macquarie University.

Mohd Pauzi, Nur Fazlinda (2015) Flowshop scheduling using artificial bee colony (ABC) algorithm with varying onlooker bees approaches. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sam, Siti Aminah (2015) Kajian amalan budaya Orang Asli Suku Kaum Jakun di Kampung Peta. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Samsudin, Mohd Safit (2015) Development of cost effective PLC training kit by using arduino platform (PLCDUINO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sohaimi, Nurul Adlihisam (2015) Intergration of control chart and pattern recognizer for bivariate quality control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zaidin, Norazri (2015) Penerapan nilai-nilai murni dalam proses pengajaran dan pembelajaran ke arah pembentukan sahsiah pelajar di Kolej Kemahiran Tinggi MARA. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohid, Siti Rahmah (2015) Photodegradation of biopolymer doped with titanium dioxide (TiO2) as ultraviolet (UV) stabilizer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mokhtar, Mohd Shukri (2015) Design optimization for the two-stage bivariate pattern recognition scheme. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Arif Abidin (2015) Improving PID controller of motor shaft angular position by using genetic algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Yusof (2015) Fast transient simulation of pinceti surge arrester model on a transmission line using ATP Software. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad Hanafi, Nur Fatihah (2015) Landfill leachate treatment by combination of electro - fenton and sequencing batch reactor method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mumin Warfaa, Abdul Rashid Omar (2015) Analysis of three different dielectric substrates on square ring microstrip antenna for wireless application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Rabiahtuladawiyah (2015) Automatic red blood cell counting based on particle area. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Sabariah and Hamdan, Rafidah and Radin Mohamed, Radin Maya Saphira and Denan, F. (2015) Natural groundwater eco-treatment (N-GET) for water supply at Johor, Malaysia. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 9 (1). pp. 19-27. ISSN 2289-7879

Musbahi, Amal Mustafa (2015) Comparative evaluation of various GPS-free localization algorithm for wireless sensor networks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustaffa, Fatimah (2015) Konstruk amalan pengurusan risiko sukan ke arah penghasilan kerangka konsep APRS jurulatih sukan Institut Pendidikan Guru Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

N

Naidu, Dineshwaran (2015) Investigation of vehicle body radiation pattern as an antenna transmission system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nawawi, Azli (2015) A modified technique in RFID networking planning and optimization. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nik Mahmod, Nik Firdaus (2015) Smartphone-based robot control for localisation. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nik Soh @ Nik Othman, Nik Zulkarnain (2015) Kualiti kepimpinan dalam kalangan penyelaras homestay: perspektif pengusaha homestay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Noraini, Nor Mohd Razif (2015) Comparative study of indoor air contaminants in different stages of new building occupancy: work environment assessment. Masters thesis, Universiti Tun Hussein Malaysia.

Noraini, Nor Mohd Razif (2015) Comparative study of indoor air contaminants in different stages of new building occupancy: work environment assessment. Diploma thesis, Universiti Tun Hussein Onn Malaysia.

Norazlimi, Nor Atiqah and Ramli, Rosli (2015) The relationships between morphological characteristics and foraging behavior in four selected species of shorebirds and water birds utilizing tropical mudflats. The Scientific World Journal, 7 (1). pp. 1-7. ISSN 1537-744X

Nser Brka, Mostafa (2015) Comparative study on correctness and time taken of test case generation using EFG and BXT techniques for GUI application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nursal, Ridwan Saputra (2015) Performance and emissions characteristics of alternative biodiesel fuel on 4-stroke marine diesel engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

O

Olaiya, Mudashir Gafar (2015) The impact of entrepreneurship educations on entrepreneurial capacity and self-employment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Tze Ching (2015) Modelling and simulation of drying process for ceramic membrane fabrication. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Zafrul Azman (2015) Real time monitoring for tank level based on ISA100.11A using star topology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Mohd Hilmi (2015) The modelling of processing conditions for polypropylene-nanoclay integral hinges at high heat exposure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Othman, Muhaini (2015) Spatial-temporal data modelling and processing for personalised decision support. Doctoral thesis, University of Technology, Auckland.

Othoman, Mohamad Asyraf (2015) Effect of sun radiation exposure on indoor air quality of car interior in tropical country. Masters thesis, Universiti Tun Hussein Onn Malaysia.

P

Pratama Putra, Jouvan Chandra (2015) Effects of indoor air quality on the occupant's health and productivity in an office building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Pusppanathan, Jaysuman and Abdul Rahim, Ruzairi and Phang, Fatin Aliah and Abas, Khairul Hamimah and Sahlan, Shafishuhaza and Mohamad, Elmy Johana (2015) 3D modelling of electrical capacitance and ultrasonic sensor integration using finite element method. Jurnal Teknologi, 77 (17). pp. 31-35. ISSN 2180–3722

R

Rahamat, Lily Afizah (2015) Effect of double stratification on boundary layer flow and heat of nanofluid over a vertical plate in the presence of chemical reaction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rahil, Mousa (2015) Export market orientation, organizational knowledge and export market performance: the mediating effect of organizational innovation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rahman, Riki and Haron, M. Sabri and Possumah, Bayu T. (2015) The assesment of inclusiveness principle of Malaysian new economic model: Maqashid Syar’iyyah perspective. Jurnal Ilmu Ekonomi Syariah, 7 (1). pp. 105-116. ISSN 24078654

Rahmat, Siti Nazahiyah (2015) Methodology for development of drought Severity-Duration-Frequency (SDF) Curves. Doctoral thesis, RMIT University.

Raja Mamat, Tengku Nur Azila and Mat Saman, Muhamad Zameri and Sharif, Safian (2015) A survey instrument design to determine the success factors in implementing the end-of-life vehicles (ELVs) management system in Malaysia. Advanced Materials Research, 1125. pp. 620-624. ISSN 1662-8985

Rajendran, Punitha (2015) The impact of building information modeling (BIM) to architechtural design process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rajendran, Punitha (2015) The impact of building information modeling (BIM) to architectural design process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ramlee, Normarina (2015) Tahap stres dalam kalangan pensyarah kolej vokasional di Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ridzuan Aw, Suzanna and Abdul Rahim, Ruzairi and Rahiman, Mohd Hafiz Fazalul and Mohamad, Elmy Johana and Mohd Yunus, Fazlul Rahman and Abdul Wahab, Yasmin and Fadzil, Naizatul Shima and Jamaludin, Juliza (2015) Simulation study on electrical resistance tomography using metal wall for bubble detection. Jurnal Teknologi, 73 (6). pp. 31-35. ISSN 2180–3722

Rodzalan, Shazaitul Azreen and Mohamed Saat, Maisarah (2015) The perception of critical thinking and problem solving skill among Malaysian undergraduate students. Prodedia - Social and Behavioral Sciences, 172. pp. 725-732. ISSN 1877-0428

Rosli, Mohd Eley (2015) Modelling of pad support for foot osteoarthritis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rosman, Nurafiqah (2015) Study on the effect of zeolite rice husk particles on polysulfone membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rusdi @ Rosdi, Nor Syuhada (2015) Transformasi kurikulum kolej vokasional dalam kesediaan melahirkan k-worker: satu kajian kes Kolej Vokasional Kluang. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ruslan, Norhafizah (2015) Air polution index (API) real time monitoring system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S

S Abdulwafi, Tahani Almehdi (2015) Performance of CDMA power control for HAPS. Masters thesis, Universiti Tun Hussein Onn Malaysia.

S Giuma, Ahmed Eshtewi (2015) Comparative study on data searching in linked list & B-tree and B+tree techniques. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sadikin, Azmah and Razali, A. A. (2015) A CFD simulation study on pressure drop and velocity across single flow microchannel heat sink. Journal of Advanced Research Design, 8 (1). pp. 12-21. ISSN 2289-7984

Saher, Mohd Najib (2015) Amalan pengurusan keselamatan bengkel kemahiran hidup (KHB) Sekolah Menengah Harian Daerah Batu Pahat. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Said, Mohamed Abdisalan (2015) A comparison of discrete cosine transform and discrete wavelet transform algorithm in watermarking against common attacks. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sakka, Seri Syahliliana (2015) Kesan aplikasi pembelajaran berteraskan multimedia terhadap pelajar teknikal dari aspek gaya pembelajaran visual di politeknik Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salamat, Mohamad Aizi (2015) Developing electronic participation framework for public policy formulation in Malaysia. Doctoral thesis, Universiti Utara Malaysia.

Saleem, Radhwan Mohammed (2015) Recommended protection scheme setting coordination for nine busbars transmission grid. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Saleh, Nor Shela and Rosli, Mohd Shafie and Aris, Baharuddin and Ahmad, Maizah Hura and Abjoli Sejzi, Abbas and Shamsudin, Nur Amalina (2015) E-learning and social media motivation factor model. International Education Studies, 9 (1). pp. 20-30. ISSN 1913-9020

Saleh, Nor Shela and Yaacob, Hashim Fauzy (2015) Penyeliaan klinikal sebagai moderator antara hubungan kemahiran klinikal dengan eksperimentasi latihan perubatan siswazah (housemanship). Sains Humanika, 4 (1). pp. 55-65. ISSN 2289-6996

Saleh, Nor Shela and Yaacob, Hashim Fauzy (2015) The supervision impact towards medical learning in experimentation evolution through the clinical knowledge and skills application. Mediterranean Journal of Social Sciences, 6 (1). pp. 459-470. ISSN 2039-9340

Saleh, Nor Shela and Yaacob, Hashim Fauzy and Mohd Shafie, Rosli (2015) Developing items using by pilot test, confirmatory factor analysis statistical in literacy for communication and supervision clinical elements provider. Mediterranean Journal of Social Sciences, 6 (2). pp. 202-214. ISSN 2039-9340

Saleh, Nor Shela and Yaacob, Hashim Fauzy and Rosli, Mohd Shafie (2015) Critical review: assessing and seeking the intricacy or discrepancy of ulrich model transforming paradigm in organization human resource. Mediterranean Journal of Social Sciences, 6 (2). pp. 324-332. ISSN 2039-9340

Saleh Al-Gahdari, Abdulaziz Shaif (2015) Development of mobile robot in virtual reality environment for educational purpose. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salim, Siti Aisyah and Sedera, D. and .Sawang, S. (2015) Non-linear and linear postulations of technology adoption determinants. ARPN Journal of Engineering and Applied Sciences, 10 (23). pp. 1769-1789. ISSN 1819-6608

Salim, Siti Aisyah and Sedera, Darshana and Sawang, Sukanlaya and H. E. Alarifi, H. E. Alarifi and Atapattu, Maura (2015) Moving from evaluation to trial: how do SMEs start adopting cloud ERP? Australasian Journal of Information Systems, 10. S219-S254. ISSN 1449-8618

Samsudin, Nurnabilah (2015) An improved microarray image analysis architecture using mathematical morphology. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sani Stores, Fatima (2015) The relationship between information technology (IT) investment and firm's financial performance of public listed companies in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Saparudin, Intan Farhana (2015) Pendekatan psikologi dakwah menangani histeria remaja muslim di Selangor. Doctoral thesis, Universiti Kebangsaan Malaysia.

Saparwan, Norfaezah (2015) Kerangka penelitian kesetaraan antara bidang kemahiran dan bidang akademik bagi proses APEL. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarhan, Ali Raheem (2015) Feasibility study of air catcher for natural ventilation application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sarpin, Norliana (2015) Developing people capabilities for the promotion of sustainability in facility management practices. Doctoral thesis, Queensland University of Technology.

Sazali, Norazlianie (2015) Gas permeation properties and characterization of mitrimid based carbon tubular membrane. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sh-Ali, Jamal Muhiyadin (2015) Performance of defected ground structure for rectangular microstrip patch antenna. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shafi, Muhammad Ammar (2015) Application of fuzzy linear regression models for predicting tumor size of colorectal cancer in Malaysia's Hospital. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sheikh Khalid, Faisal (2015) Engineering properties of ring shaped polytheylene terephthalate (RPET) fiber self-compacting concrete. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sherwani, Fahad and KSM Kader Ibrahim, Babul Salam and Huq, M. Saiful and Ahmad, Mohd Khairul Ikhwan and Nasir, N.H.M. and Rahman, K.A.A. (2015) Rehabilitation system for paraplegic patients using mind machine interface; a conceptual framework. ARPN Journal of Engineering and Applied Sciences. pp. 1-5. ISSN 1819-6608

Siddiki, Aishatu (2015) Insect diversity and composition during the wet and dry seasons in three forest types of Johor, Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sidik, Mohd Azkar (2015) AC motor speed performance improvement using fuzzy logic control. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Aftab Ahmed (2015) Optimization of supply chain management by simulation based RFID with XBEE Network. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Suardi, Mirnah (2015) Rapid premixing fuel-water injector in burner combustion. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suhaimy, Syazwan Hanani Meriam and Chin, Wei Lai and Abd Hamid, Sharifah Bee and Johan, Mohd Rafie and Hasan, Md. Rakibul (2015) Analysis of photocurrent responses of anodized TiO2 Nanotubes synthesized from different organic electrolytes. Advanced Materials Research, 1109. pp. 429-433. ISSN 1022-6680

Sulaiman, Marizan and Mohamad Nor, Ahmad Fateh (2015) PV and QV curves approach for voltage instability analysis on mesh-type electrical power networks using digsilent. MAGNT Research Report, 3 (6). pp. 36-42. ISSN 1444-8939

Sulaiman, Marizan and Mohamad Nor, Ahmad Fateh and Omar, Rosli (2015) A GUI based teaching and learning software for system sizing of a stand alone hybrid solar electricity system. MAGNT Research Report, 3 (6). pp. 72-85. ISSN 1444-8939

Sulaiman, Nor Lisa and Mohd Salleh, Kahirol and Mohamad, Mimi Mohaffyza and Lai, Chee Sern (2015) Technical and vocational education in Malaysia: policy, leadership, and professional growth on Malaysia women. Asian Social Science, 11 (24). pp. 153-161. ISSN 1911-2017

Sulaiman, Nur Na'imah (2015) Development of repetitive current controller using raspberry PI for 3 phase active power filter for nonlinear load improvement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sunitha V. Doraisamy, Sunitha V. Doraisamy and Zainal Abidin Akasah, Zainal Abidin Akasah (2015) 2014 Malaysia flood: Impacts & factors contributing towards the restoration of damages. Journal of Scientific Research and Development, 2 (14). pp. 53-59. ISSN 1115-7569

Sutaji, Siti Suhaila (2015) Kesan penggunaan koswer multimedia animasi visual terhadap pencapaian pelajar dalam mata pelajaran matematik. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Syazwan, M. M. Syafiq and Yusof, M. Z. M. and Chang, C.K. and Abdullah, M. D Amir (2015) Comparing cooling energy between existing air-conditioning system and proposed design system. Applied Mechanics and Materials, 699. pp. 834-839. ISSN 1662-7482

T

Tahir, Norhaiza (2015) Hubungan personaliti guru terhadap kemahiran proses sains pelajar. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Talib, Rahmat (2015) Multi slot amplitude coding technique for high speed optical fiber communication system. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tam, Lina (2015) The development of finite element model for Malaysian Female Anthropometric Dummy. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tamin, Masran and Harun, Amran and Estim, Abentin and Saufie, Syafiqah and Obong, Salleh (2015) Consumer acceptance towards aquaponic products. IOSR Journal of Business and Management, 17 (8). pp. 49-64. ISSN 2319-7668

Tan, Mee Ting (2015) Building a family ontology to meet consistency criteria. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Siun Cheng (2015) Printing conductive ink tracks on textile materials. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Tuah, Siti Nor Aizura (2015) Mechanical and thermal properties of polypropylene/clay roof tiles waste (PP/CRTW) composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

U

Ugbede, Onalo (2015) The effects of accounting standards on earnings management and value relevance : a case of Malaysian and Nigerian banks. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

V

V. Doraisamy, Sunitha and Akasah, Zainal Abidin (2015) Substantial consequences and factors leading towards construction project success and failure. Australian Journal of Basic and Applied Sciences, 9 (25). pp. 10-15. ISSN 1991-8178

W

Wan Mohamad Noor, Wan Mohd Rizairie (2015) Distribution power level by GSM900 base station for RF energy harvesting. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Salleh, Wan Mohd Shukri (2015) Development of knee joint angle trajectory tracking for leg support mechanism. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Yusoff, Wan Fauziah and Kasim, Rozilah and Martin, David and Gafar, Mudashir (2015) Attitude to business reality, perceived value creation and subjective norms: how they impact on students of higher learning institutions’ self-employment intentions in Malaysia. Mediterranean Journal of Social Sciences, 6 (5). pp. 186-196. ISSN 2039-2117

Wibowa, Pratama Jujur (2015) Synthesis of self-assembled polystyrene nanospheres/cadmium metal nanoparticles (PSNs/CdMNPs) composite thin film for its application as adsorbent and catalyst. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Y

Yahya, Mohd Yamani (2015) The development of strategic planning concept process model for small medium enterprise (SME) in the construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yasin, Mohd Norazam and Abdullah, Abd Halid and Mustakim, Fajaruddin and Abd. Hamid, Abd. Rahim and Singh, Bachan (2015) Maintenance organization at Universiti Tun Hussein Onn Malaysia (UTHM). Applied Mechanics and Materials, 773-77 (7). pp. 834-838. ISSN 1662-7482

Yasin, Mukhtar Ahmed (2015) Development of triple band planar inverted F-antenna (PIFA) for GSM 800 MHz, DCS 1800 MHz and Bluetooth 2400 MHz. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yunus, Riduan and V. Doraisamy, Sunitha and Akasah, Zainal Abidin (2015) A review on abandoned construction projects: causes & effects. Applied Mechanics and Materials, 773 (774). pp. 979-983. ISSN 1662-7482

Yusoff, Adnan (2015) Effect of sound radiation from plate attached with absober. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yusoff, Yusmahaida (2015) Experimental demonstration of cap transmitter using very high speed IC hardware description language (VHDL). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Z

Zainal Abidin, Ahmad Noor Ariff (2015) Non-invasive early diagnosis of deep vein thrombosis. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Ahmad Sayuti (2015) Background concentration of airborne microbe in new constructed building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Ahmad Sayuti (2015) Background concentration of airborne microbe in new constructed building. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, S. F. and Muhamad Said, M. F. and Abdul Latiff, Z. and Zahari, I. and Said, M. (2015) The study of the effect of intake valve timing on engine using cylinder deactivation technique via simulation. Jurnal Teknologi (Sciences & Engineering), 77 (8). pp. 107-111. ISSN 2180–3722

Zainal Abidin, Zainal Zulhilmi (2015) Konflik pengambilan tanah Orang Asli : kajian kes di Johor dan Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainal Abidin, Zainal Zulhilmi (2015) Konflik pengambilan tanah Orang Asli: kajian kes di Johor dan Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zainol, Nur Zainatul Nadra and Abdul Majid, Latifah and Abd Kadir, Muhd Najib (2015) Implications of Nasr Hamid Abu Zayd’s interpretations on women issues in the Al-Qur’an. Islamiyyat The International Journal Of Islamic Studies, 37 (2). pp. 153-161. ISSN 0126-5636

Zakaria, Normah and Jamaludin, Nur Hasliza and Naim, Nor Azlin and Nur Azzarina, Khamis (2015) Leadership style head of polytechnic department and regard with to work culture. Journal of Education and Practice, 6 (15). pp. 23-30. ISSN 2222-1735

Zarwawi, Nur Fatin Fariha (2015) Pelaksanaan pembelajaran melalui buku teks digital dalam memperkasakan pengajaran guru di sekolah. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zolkhifly, Mohd Azfitry (2015) Fast transient simulation of fernandez surge arrester model on a transmission line using ATP. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkafli, Mohd Fadhli (2015) Arbitrary Lagrangian-Eulerian form of flowfield dependent variation (ALE-ADV) method for moving boundary problems. Doctoral thesis, International Islamic University Malaysia.

Zulkifli, Nur Umaira (2015) A low power and fast CMOS arithmetic logic unit. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkifly, Nurul Shahida (2015) Gas-liquid simulation of an airlift bubble column reactor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkipli, Nazatul Erma (2015) Dynamic modelling of flexible link aerator with embedded holes to generate dissolved oxygen in tiger prawn pond. Masters thesis, Universiti Tun Hussein Onn Malaysia.

zakaria, Hussain and Tokhi, Mohammad Osman and Gharooni, Samad and Jailani, Rozita and KSM Kader Ibrahim, Babul Salam (2015) Inclined ergometer to enhance FES-assisted indoor rowing exercise performance. International Journal of Simulation:Systems,Science & Technology, 10 (6). pp. 16-25. ISSN 1473-8031

This list was generated on Tue Jul 5 10:15:03 2022 +08.