Items where Year is 2021

-

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni (PKKA) - Julai 2021. [Bulletin]

-, - (2021) Buletin Fakulti Pendidikan Teknikal dan Vokasional (FPTV) - Bil. 6/2021 (Jun2021). [Bulletin]

-, - (2021) Buletin Jabatan Pengurusan Perniagaan, Fakulti Pengurusan Teknologi dan Perniagaan - Sesi 2 2020/2021. [Bulletin]

-, - (2021) Buletin Pejabat Hal Ehwal Pelajar - Julai 2021. [Bulletin]

-, - (2021) Buletin Pejabat Kampus Lestari Edisi Januari - Mei 2021. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni - Jun 2021. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni - Ogos 2021. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni - September 2021. [Bulletin]

-, - (2021) Buletin Pusat Kemajuan Kerjaya dan Alumni Edisi November 2021. [Bulletin]

-, - (2021) Buletin UTHM Edisi 1/2021. [Bulletin]

-, - (2021) Buletin UTHM Edisi 2/2021. [Bulletin]

-, - (2021) Buletin UTHM Edisi 3/2021. [Bulletin]

A

A. A., Anis and A. B., Hadzley and A. A., Umar and T., Norfauzi and Fairuz, M. R. and Herawan, S. G. and Thongkaew, Thongkaew (2021) Influence of sintering temperature on density, hardness, shrinkage and microstructure of alumina-zirconia cutting tool. International Journal of Nanoelectronics and Materials, 14. pp. 135-144.

A. Khalifa, Nasradeen (2021) An overview of mini systematic literature on factors that influence the parents "perspective of leaving their children to / from school. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 36-44.

A. Razak @ Aziz, Nur Syafira (2021) Study on the performance of different slope inclination of vegetated roof. Masters thesis, Universiti Tun Hussein Onn Malaysia.

A. Rhaffor, Kauthar and Mohamed, Aida Salwani and Jamian, Rahim and Krishnan, Pranesh (2021) Roles of 5S practice in MARA Ecosystem Quality Standard (MQS)—a case study. In: Progress in Engineering Technology. Springer International Publishing, pp. 345-355.

A.B. Kamisan, Nur and Lee, Muhammad H. and Hassan, Siti F. and Norrulashikin, Siti M. and Nor, Maria E. and Rahman, Nur H. A. (2021) Forecasting wind speed data by using a combination of ARIMA model with single exponential smoothing. International Information and Engineering Technology Association, 8 (2). pp. 207-212.

AL-Fadhali, Najib and A. Majid, Huda and Omar, Rosli and Abdul Sukora, Jumadi and A. Rahim, Mohamad K. and Zainal Abidin, Zuhairiah and Al-Bukhaiti, Mohammed and Momin, Abdul Malik and Abo Mosali, Najmaddin (2021) Review on frequency reconfigurable antenna using substrate-integrated waveguide for cognitive radio application. JOURNAL OF ELECTROMAGNETIC WAVES AND APPLICATIONS. pp. 1-33.

Ab Ghani, Mohammad Azuan and Zakaria, Normah and Hamzah, Norhasyimah and Rubani, Siti Nur Kamariah (2021) Smart theft alarm with image. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 59-69. ISBN 978-967-2817-45-1

Ab Zail, Nurul Fazilah and Adnan, Suraya Hani (2021) Sustainable concrete partially comprised of supplementary cementitious material and alternative fine aggregate- a review. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Ab. Latiff, Maizatul Azmah (2021) Amalan guru dalam pelaksanaan program pendidikan inklusif dari aspek kolaboratif dan adaptasi di sekolah rendah. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abass Younis, Fatma Hussien (2021) Thermal performance improvement for residential buildings in the tropics through the application of green façade and green roof. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abbas, Sameera (2021) Green synthesis, characterization and in-vitro bioactivities of gold nanoparticles mediated by turmeric crude extract and curcumin. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Aziz, Noreen Noor (2021) Predicting halal cosmetics purchase intention among consumers in Johor Darul Takzim. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Hafidz, Annis Surraiyya and Mohamad, Mimi Mohaffyza (2021) Development of basic quantity surveying learning module through 21st century learning activity. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Abd Hamed, Noor Kamalia (2021) Band gap tailoring of flower-like rutile-phased TiO2 nanostructured film grown via facile hydrothermal doping process for photocatalytic degradation of methylene blue. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abd Latif, Siti Nadirah and Omar, Nurul Aswa (2021) Sistem pengurusan Pusat Latihan Memandu Spim Hi Tech. Penerbit UTHM, UTHM.

Abd Malik, Ahmad Khairul (2021) The influence of particle size towards the resistivity and chargeability value for groundwater investigation interpretation. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Rahman, Sa’afilah (2021) Pembangunan model klasifikasi penilaian kondisi fasad rumah kedai awal di pusat bandar Muar, Bandar Di Raja Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Abd Rashid, Ainur Nalisa and Kormin, Faridah and Asman, Saliza (2021) Quality analysis of meats using FTIR spectroscopy, colour spectrophotometer, texture analyser and physical image analysis. Journal of Sustainability Science and Management, 16 (1). pp. 103-119.

Abd Roni, N. and Adnan, S. H. and N Hamidon, N Hamid and T. Ismail, T. N. H. (2021) The vertical recycled concrete aggregate filter for removal of phosphorus in wastewater. In: International Conference on Civil and Environmental Engineering, 18 November 2020, Malaysia, Malaysia.

Abd Roni, Norwardatun and Adnan, Suraya Hani and Hamidon, Nuramidah and Tuan Ismail, Tuan Noor Hasanah (2021) The physical and chemical characteristic of recycled concrete aggregate for removal phosphorus as a filter system. Journal of Advanced Industrial Technology and Application, 2 (1). pp. 65-70.

Abd Samad, Muhammad Izzuddin (2021) Band anti-crossing modelling and characterization of multi quantum well gainnas for photovoltaic application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abd Wahab, Izudinshah and Yusof, Hanita and Adnan, Nor Azizah (2021) Aplikasi teknologi pembinaan buluh dalam pembangunan kemudahan komuniti. In: ARCHITECTURE AND TECHNOLOGY IN MALAYSIA : From Tradition to Globalization. Penerbit UTHM, UTHM, pp. 1-9. ISBN 978-967-2817-14-7

Abd. Jabar, Nur Shahira and Ahad, Rosnee and Mustafa, Mohamad Zaid and Sri Sumarwati, Sri Sumarwati (2021) Pengesan pH air automatik. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 49-58. ISBN 978-967-2817-45-1

Abd. Rashid, Hana Munirah (2021) Modeling and simulation of grid-connected solar photovoltaic systems with D-statcom and dvr to improve stability in distribution system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abda Alsalim, Hafudh Farhood (2021) The Loss Of Identity In Emily Bronte‘S Wuthering Heights and K. S. Maniam‘S The Return in relation to communication issues: A critical analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdalla, Jabir Ahmed (2021) Analysis of passive optical network. Masters thesis, Universiti Tun Hussein Malaysia.

Abdalla Imadeldin, Abdelrahim Mohamed (2021) Design and configuration analysis of dual robotic arm via denavit hartenberg parameters approach. Masters thesis, Universiti Tun Hussein Malaysia.

Abdi, Mohamed Khalif (2021) Dualwavelength fiber laser. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Azlen, Farah Atiqah (2021) Assessment of electric field on hdpe-natural rubber biocomposite with sphere to sphere electrode configuration. Masters thesis, Universiti Tun Hussein Malaysia.

Abdul Gani, Ahmad Faiz Hilmi (2021) Design and analysis of multiphase dc/dc boost converter with minimized input current ripple. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Ghaffar, Fatin Shafirah and Mohd Zuki, S. S. and Shahidan, S. and Mohamed Nazri, Fadzli and Abdul Rahim, Mustaqqim and Mohammad Azmi, Mohamad Azim and Abdul Rahman, Norashidah and W. Ibrahim, M. H. (2021) Mechanical properties of concrete containing untreated palm oil fuel ash and egg shell powder. In: Proceedings of the Sustainable Concrete Materials and Structures in Construction 2020. Springer, pp. 259-270.

Abdul Latiff, Norliza and Pei, Ying Ong and Abdullah, Luqman Chuah and Abd Rashid, Siti Nor Azlina and Mohd Fauzi, Noor Akhmazillah and Mohd Amin, Noor Amaiza (2021) Ultrasonic-Assisted Extraction (UAE) for enhanced recovery of bioactive phenolic compounds from cosmos caudatus leaves. ResearchGate.

Abdul Latiff Janaton, Noor Aqilah (2021) Apology strategies used by hotel management students in response to conflicts and challenges. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Latiff Janaton, Noor Aqilah (2021) Apology strategies used by hotel management students in response to conflicts and challenges. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Mukhti, Muhammad Ammar Qayyum and Didane, Djamal Hissein and Ogab, Mohammed and Manshoor, Bukhari (2021) Computational fluid dynamic simulation study on NACA 4412 airfoil with various angle of attacks. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-8.

Abdul Rahim, Nur Fazira (2021) Optimization of extraction parameters of selected Malaysian plants towards antiurolithiatic activities (IN-VITRO). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahim, Putri Syalabiah (2021) The effects of silica (SiO2) derived from rice husk composition and sintering temperature on the fabrication of silica (SiO2) and silica-nickel oxide (SiO2-NiO) porous bodies. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Abdul Wafi and Md Sahak, Adibah Aishah and Yusri, Nabilah and Raden Ismail, Raden Mohd Farhan Helmy and Rohiat, Mohd Akmal (2021) The development of Malay Dessert Module (Bubur and Pengat). In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Abdul Rahman, Junita (2021) Chemical and biological reactions of solidification of peat using ordinary portland cement (OPC) and coal ashes. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Rahman, Khairul Anuar and Abd Jalil, Norazwani and M.Arsad, Mohd Azhar and Hashim, Suhaizal and Rahim, Mohd Bekri and Nur Yunus, Faizal Amin and Razali, Nizamuddin and Ismail, Mohd Erfy (2021) Development of mobile application framework based on competency-based education for technical and vocational education. Journal of Technical Education and Training, 13 (2). pp. 44-52. ISSN 2229-8932

Abdul Rahman, Khairul Anuar and Arshad, Muhammad Syarif and Rahim, Mohd Bekri and Nur Yunus, Faizal Amin and Hashim, Suhaizal and Razali, Nizamuddin (2021) Tinjauan terhadap motivasi dan transformasi budaya kehidupan dalam kalangan pelajar baharu di Fakulti Pendidikan Teknikal dan Vokasional, UTHM. Sains Insani, 6 (1). pp. 121-125.

Abdul Rahman, Nurul Farhana and Abd.Rahman, Hamimah and Azmi, Mohd Azham (2021) Perovskite-type oxide-based dual composite cathode for solid oxide fuel cells: a short review. Solid State Phenomena, 317. pp. 417-425. ISSN 1662-9779

Abdul Rahman, Nurul Farhana and Abd.Rahman, Hamimah and Wan Azhan, Wan Muhammad Syahmi and Yatim, Nor Hamidah (2021) Linear shrinkage, strength and porosity of alumina-based ceramic foam with corn starch as pore former. Solid State Phenomena, 317. pp. 75-80. ISSN 1662-9779

Abdul Rahman1, Khairul Anuar and Arshad, Muhammad Syarif and Rahim, Mohd Bekri and Nur Yunus, Faizal Amin and Hashim, Suhaizal and Razali, Nizamuddin (2021) Tinjauan terhadap motivasi dan transformasi budaya kehidupan dalam kalangan pelajar baharu di Fakulti Pendidikan Teknikal dan Vokasional, UTHM. Jurnal Sains Insani, 6 (1). pp. 121-125.

Abdul Razak, Muhammad Azmil (2021) Assessment of ecosystem integrity of lowland dipterocarp forest ecosystem using remote sensing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdul Sani, Amiril Sahab and Jamaluddin, Nor Athira and Jamaludin, Ahmad Shahir and Talib, Norfazillah (2021) Calophyllum-Inophyllum from Pahang Malaysia as biolubricant feedstock for industrial application. In: Recent Trends in Manufacturing and Materials Towards Industry 4.0. Springer, Springer Singapore, pp. 441-449. ISBN 978-981-15-9505-9

Abdul Shukor, Jum’azulhisham and Jamian, Rahim and Hassan, Azmi and Abdul Razak, Muhammad Al’Hapis (2021) The evolution of gasses in fire suppression system to promote changes in industrial towards global sustainability. Materials Science Forum, 1025 (1). pp. 259-264. ISSN 1662-9752

Abdul Wahab, Abdul Wahab and Embong, Zaidi and Ahmad Tajudin, Saiful Azhar and Uz Zaman, Qamar and Ullah, Hidyat (2021) The electrokinetic stabilization (EKS) impact on soft soil (peat) stability towards its physical, mechanical, and dynamic properties at Johor state, Peninsular Malaysia. Physics and Chemistry of the Earth. pp. 1-21. ISSN 1474-7065

Abdulameer, Ali Hussein (2021) Systemic functional linguistics of eastern and western leaders' reaction towards trump's decision of recognizing Jerusalem as Israel Capital. Doctoral thesis, Universiti Tun Hussein Malaysia.

Abdulhakim Warsame, Abdirahim (2021) Antenna design for pineapple moisture content. Masters thesis, Universiti Tun Hussein Malaysia.

Abdulkareem, Karrar Hameed (2021) A new multiperspective framework for standardization and benchmarking of image dehazing algorithms. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdulla Lari, Darwish Ahmed Darwish (2021) Influence of organizational culture in the relationship between information system and operational performance on manufacturing sector in UAE. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, AlghamdiHamad and Samsudin, Mohd Ali and Abdul Rahim, Shamimah Parveen and HAlqarni, Mohammed Ali and Ismail, Mohd Erfy (2021) Viewing mathematics teachers’ professional identity in the Kingdom of Saudi Arabia through the Lens of Social Theory of Learning and Gender Schema Theory. PSYCHOLOGY AND EDUCATION JOURNAL, 58 (1). pp. 4307-4318.

Abdullah, Hanif and Sarpin, Norliana and Omar, Roshartini and Mohamed, Sulzakimin and Ismayatim, Norddin (2021) Kajian masalah kewangan yang dihadapi kontraktor bumiputera semasa fasa pembinaan. Research in Management of Technology and Business, 2 (1). pp. 812-830.

Abdullah, Mohd Hafizul Afifi (2021) Improved personalised data modelling using parameter independent fuzzy weighted k-nearest neighbour for spatio/spectro-temporal data. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Nurul Hidayah Liew and Mohd Jamil, Siti Fatimah and Mukthar, Marina Ibrahim and Paimin, Aini Nazura and Mohamed, Maziana (2021) Persepsi bakal Guru Pendidikan Khas terhadap Pendidikan Khas di Malaysia. In: Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam Malaysia (MEDC2020), 11-12/11/2020, USIM.

Abdullah, Rosdi (2021) Penggunaan teknik asas lakonan teater dalam pengajaran subjek sains. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Abdullah, Shakila and Mohd Nor, Farhah Husna and Khamidun, Mohd Hairul (2021) Biodegradation of oil and grease from Agro-Food Industry by immobilised Serratia marcescens SA30. Malaysian Journal of Analytical Sciences, 25 (2). pp. 193-202.

Abdullah, Teo Wee Siang@Aariz Daniel Teo and Zainol, Nur Zainatul Nadra and Mat Nayan, Nadirul Hasraf and Muhammad, Norhayati (2021) A systematic literature review: the effect of date palms (phoenix dactylifera) toward breast cancer MCF-7 cell line. Annals of R.S.C.B.,, 25 (4). pp. 5387-5393. ISSN 1583-6258

Abdullah J, AlghamdiHamad and Samsudin, Mohd Ali and Abdul Rahim, ShamimahParveen and H. Alqarni, Mohammed Ali and Ismail, Mohd Erfy (2021) Teachers’ professional identity measures in the Kingdom of Saudi Arabia from the perspective of Rasch Model Framework. Psychology and Educational Journal, 58 (1). pp. 4243-4257.

Abdullah-Fauz, Nurfatiha Akmal Fawwazah and Othman, Nursyuhada and Haris, Hidayah and Nur Hartini Sariyati, Nur Hartini Sariyati and Ramli, Farah Farhana and Firdaus Sufahani, Suliadi and Md Zain, Badrul Munir and Mohd-Ridwan, Abd Rahman and Aifat, Nor Rahman and Mohamed, Mohd Sanusi and Maryanto, Ibnu and Abdul-Latiff, Muhammad Abu Bakar (2021) Utilization practices and conservation impacts of endangered wildlife in asian countries. In: 9TH INTERNATIONAL CONFERENCE ON ADVANCED MATERIAL ENGINEERING & TECHNOLOGY.

Abdullahi Baba, Bashir (2021) The influence of Islamic banking products’ features on customer satisfaction in Nigeria. Masters thesis, Universiti Tun Hussein Malaysia.

Abdulridha, Qayssar Abbas (2021) Developing Iraqi pre- service teachers' critical thinking skills and understanding of hamlet through reader response strategy. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abed, Farook Nehad (2021) Enhancement the performance of wire cutting process by additives nanopowder alumina (Al2O3). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Abid, S. K. and Sulaiman, N. and Wei, C. S. and Nazir, U. (2021) Flood vulnerability and resilience: Exploring the factors that influence flooding in Sarawak. In: International Conference on Research Collaboration of Environmental Science, 12 March 2018, Surabaya, Indonesia.

Abid, Sheikh Kamran and Sulaiman, Noralfishah and Chan, Shiau Wei and Nazir, Umber (2021) Building resilient future: information technology and disaster management - a Malaysian perspective. In: ICSEEGT 2021, December 9, 2021.

Abu Bakar, Norshila and Othman, Norzila and Yunus, Zalilah Murni and Altowayti, Wahid Ali Hamood and Tahir, Muhammad and Fitriani, Nurina and Mohd Salleh, Siti Nor Aishah (2021) An insight review of lignocellulosic materials as activated carbon precursor for textile wastewater treatment. Environmental Technology & Innovation, 22. pp. 2-27.

Achmad, Zainun and Ismail, Al Emran and Harimon, Mohd Azhar (2021) Study of fatigue life on aluminium composites – fly ash received T6 heat treatment and artificial aging. International Journal of Engineering Trends and Technology, 69 (2). pp. 12-18. ISSN 2231-5381

Adiat, I. Arogundade and S.M.Megat-Yusoff, Puteri and Ahmad, Faiz and H.Bhat, Aamir and O.Afolabi, Lukmon (2021) Modification of bauxite residue with oxalic acid for improved performance in intumescent coatings. Journal of Materials Research and Technology, 12. pp. 679-687.

Adnan, Suraya Hani and Mohd Yassin, Nurain Izzati and Shahidan, Shahiron and Osman, Mohamad Hairi and Ahmad Jeni, Mohamad Luthfi and Wan Jusoh, Wan Amizah and Jamellodin, Zalipah and Abdul Hamid, Noor Azlina and Ahmad, Faridahanim (2021) Concrete brick properties incorporating EPS and POFA as replacement materials. Journal of Advanced Research in Materials Science, 77 (1). pp. 14-25. ISSN 2289-7992

Adnan, Suraya Hani and Pozi, Adriana Farniza and Osman, Mohamad Hairi and Ahmad Jeni, Mohamad Luthfi and Mohd Yassin, Nurain Izzati and Jamellodin, Zalipah and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and A. Majid, Masni (2021) Mechanical performance of lightweight brick at elevated temperature. MALAYSIAN CONSTRUCTION RESEARCH JOURNAL, 13 (2). pp. 1-8.

Adnan A. Alshaer, Adnan A. Alshaer and Ainun Rahmahwati, Ainun Rahmahwati and Ramzi Qasem, Ramzi Qasem (2021) Biosynthesis of zinc oxide microparticles by using palm oil leaves extract. In: 2021 International Congress of Advanced Technology and Engineering (ICOTEN), July 4-5, 2021, Yemen.

Afolabi, Lukmon Owolabi and Afolabi-Owolabi, Oluwafunke and M. Elfaghi, Abdulhafid and Hissein Didane, Djamal and Awadh, Mohammed Ghaleb and Akram, Al-Mahmodi (2021) Experimental investigation on evacuated tube solar collector using biofluid as heat transfer fluid. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 87 (3). pp. 40-50. ISSN 2289-7879

Ag Kanak, Fadzilah (2021) Ethnobotany of traditional vegetables used by Sama-Bajau community in Kota Belud, Sabah, and phytochemical and anti-aging investigation of crassocephalum crepidioides. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahad, Rosnee and Mustafa, Mohamad Zaid and Mohamad, Suhaimi and Abdullah, Nur Hanim Saadah and Nordin, Mohd Norazmi (2021) Work attitude, organizational commitment and emotional intelligence of Malaysian vocational college teachers. Journal of Technical Education and Training, 13 (1). pp. 15-21. ISSN 2229-8932

Ahad, Rosnee and Mustafa, Mohamad Zaid and Mohamad, Suhaimi and Abdullah, Nurhanim Saadah and Sumarwati, Sri (2021) Development energy monitoring system ising Internet of Things (IoT). Solid State Technology, 64 (2). pp. 2557-2565.

Ahad, Rosnee and Mustafa, Mohamad Zaid and Muhamad, Suhaimi and Abdullah, Nurhanim Saadah and Sumarwati, Sri (2021) Development energy monitoring system using Internet of Things (IoT). Solid State Technology, 64 (2). pp. 2557-2565.

Ahamad, Adri Nirwan and Samsudin, Mohd Ali and Ismail, Mohd Erfy and Ahmad, Nur Jahan (2021) Enhancing the achievement in physics’ motion concept through online multiple intelligence learning approach. EURASIA Journal of Mathematics, Science and Technology Education, 17 (2). pp. 1-11.

Ahmad, Kamilah and Mohamed Zabri, Shafie and Atan, Siti Anisah (2021) Multidimensional performance measures and factors and their linkage with performance. International Journal of Emerging Markets. ISSN 1746-8809

Ahmad, Khalid Subhi and Che Seman, Fauziahanim and Hamzah, Shipun Anuar and Goh, Chin Hock and Mohd Shah, Shaharil (2021) Circuit model for microstrip array antenna with defected ground structures for mutual coupling reduction and beamforming applications. International Journal of Integrated Engineering, 13 (1). pp. 101-119. ISSN 2229-838X

Ahmad, Muhammad Fazrulhelmi (2021) Pembelajaran berasaskan aplikasi iedutech berdasarkan gaya pembelajaran visual dalam kalangan pelajar Pendidikan Teknikal Dan Vokasional (PTV). Masters thesis, Universiti Tun Hussein Malaysia.

Ahmad, Nor Aziah and Ahmad Nazri, Naziatul Syarmila (2021) Factors that contribute to obesity problem among UTHM catering student. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 32-39. ISBN 978-967-2975-96-0

Ahmad, Nor Aziah and Mohamad Sukeri, Siti Nur Sarini and Tukiran, Nor Anis Intan Aqiah and Zakariah, Siti Hajar and Ismail, Lisa Marian Syawal and Harun, Hairuddin and Md Sahak, Adibah Aishah and Abdul Rahman, Abdul Wafi (2021) Development of food safety module and sanitation management. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ahmad, Nor Aziah and Zainuddin, Nazatul Syuhada (2021) Safety and hygiene practices in handling and provision of food among catering students, FPTV. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 21-31. ISBN 978-967-2975-96-0

Ahmad, Norazlina (2021) Optimisation and modification of TiO2 nanorods towards a highly efficient interfacial layer for uniformly CU2O deposition in heterojunction solar cell applications. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ahmad, Norhafizah and Wan Zahari, Wan Ainaa Mardhiah and Kirin, Arwansyah (2021) The implementation of hadith studies for visually impaired people in Malaysia: issues and challenges. Journal of Social Transformation and Regional Development, 2 (3). pp. 101-110.

Ahmad, Nurazwa and Abdullah, Nor Hazana and Ahmad, Anita and Abu, Ghazali (2021) A literature review on how tax incentives could assist innovation and SME research ecosystem. Advanced International Journal of Business, Entrepreneurship and Smes (aijbes), 3 (9). pp. 228-243.

Ahmad, Nurazwa and Abu Seman, Noor Aslinda and Selimin, Mohamad Ali and Abdul Halip, Juliana and Wan Ahmad, Wan Nurul Karimah (2021) Lecturer’s perception on the implementation of Problem-Based Learning (PBL) approach in teaching and learning. International Journal of Education, Psychology and Counselling (ijepc), 6 (42). pp. 492-507.

Ahmad, Raja Adibah and Harun, Zawati and Azhar, Faiz Hafeez and Hussin, Rosniza and Mohd Zin, Mohamad Faiz and Sazali, Norsuhailizah and Syamsul Bahri, Syamsutajri and Jamaluddin, Mohd Riduan and Misdan, Nurasyikin and Kamdi, Zakiah and Hairom, Nur Hanis Hayati (2021) Polymer mixed membrane with microflower TiO2 as additive for photocatalyst in organic compound. Materials Today: Proceedings, 46. pp. 2122-2130.

Ahmad Idris, N. S. and Abdullah, N. H. L. and M. Mohamed, M. Mohamed and Paimin, A. N. (2021) Self-efficacy of catering students of Faculty Technical and Vocational Education, University Tun Hussein Onn Malaysia in the Field of Career to be pursued. In: Proceedings of 8th International Conference on Advanced Materials Engineering & Technology (ICAMET 2020).

Ahmad Riduan, Nuraqilah Haidah and Mohd Foozy, Cik Feresa and A. Hamid, Isredza Rahmi Binti and Shamala, Palaniappan and Othman, Nur Fadzilah (2021) Data wiping tool: ByteEditor Technique. IEEE.

Ahmad Shafii, Nur Hidayah and Zainulabidin, Muhd Hafeez (2021) Lepironia articulata as a sustainable acoustic absorber. Research Progress in Mechanical and Manufacturing Engineering, 2 (2). pp. 201-212. ISSN 2773-4765

Ahmad Zaini, Ainnur Diyanah and Mohd Rashid, Nurul Ain and Hut, Norliyana and Abdul Rahman, Dina Safiah and Dahri, Nurul Atiqah and Abd Talib, Natasha Amira and Nathan, Shelena Soosay (2021) Mobile and education. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 54-65. ISBN 978-967-2389-28-6

Ahmad Zamri, Mohd Faiz Muaz and Bahru, Raihana and Amin, Rashid and Aslam Khan, Muhammad Umar and Abd Razak, Saiful Izwan and Abu Hassan, Shukur and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2021) Waste to health: a review of waste derived materials for tissue engineering. Journal of Cleaner Production, 290 (25).

Ahmed, Mohamed Abdimalik (2021) Wearable microstrip patch antenna for elderly healthycare monitoring. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmed Abdulle, Yahye (2021) Sizing and analysis of a stand-alone photovoltaic and wind system. Masters thesis, Universiti Tun Hussein Malaysia.

Ahmed Bhutto, Aqeel (2021) Development of ADC14 hypereutectic ALSi alloy based composite reinforced with SiC , Al2O3 and TiB2 through stir casting. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Marwan, Idrees Aleesa (2021) An intrusion detection system for DDoS flooding attacks on IPv6 networks using deep learning techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Shakir, Alaa (2021) Effect of palm oil waste and quarry dust on the properties of hybrid blocks. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ahmed Yusuf, Farhan (2021) Wideband textile antenna for WLAN and WIMAX applications. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Aidil, Nur Muhammad and Hariri, Azian (2021) ASHRAE global thermal comfort database ii: thermal comfort of mechanically ventilated and naturally ventilated office building. Penerbit UTHM, UTHM.

Al Ameri, Abdulla Eissa Saleh (2021) Structural relationship model of causes and effects of construction changes in UAE construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al Hammadi, Ali Hassan Yousif (2021) The role of national culture on the relationship between leadership styles and job satisfaction among public universities in the United Arab Emirates. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Al-Alimi, Abdulmoghni Wazae and Cholan, Noran Azizan and Salam, Sameer and Kamil, Yasmin Mustapha and Mohamed Ahmed, Mahmoud Hazzaa and Mahdi, Mohd Adzir (2021) Brillouin-Raman fiber laser with switchable wavelength spacing based on Brillouin pump distribution. Results in Physics, 25. ISSN 2211-3797

Al-Alimi, Sami and Lajis, M. A. and Shamsudin, S. and Chan, B. L. and Rady, Mohammed. H. and Al-Zeqri, Musleh and Wahib, Ahmed and Aladani, Abdalkarim and Ali, Abdulaziz and Yusuf, Nur Kamilah (2021) Response Surface Methodology (RSM) implementation in zro particles reinforced aluminium chips by Hot Equal Channel Pressing (ECAP). In: Intelligent Manufacturing and Mechatronics. Springer Link, pp. 959-974.

Al-Alimi, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Chan, B. L. and Hissein, Didane Djamal and H. Rady, Mohammed and Msebawi, Muntadher Sabah and Sabbar, Huda Mohammed (2021) Hot extrusion followed by a hot ecap consolidation combined technique in the production of Boron Carbide (B4C) reinforced with aluminium chips (AA6061) composite. Materials and technology, 55. pp. 347-354. ISSN 1582-2949

Al-Alimia, Sami and Lajis, Mohd Amri and Shamsudin, Shazarel and Yusuf, Nur Kamilah and Boon, Loong Chan and Didane, Djamal Hissein and H. Rady, Mohammed and M. Sabbar, Huda and S. Msebawi, Munthader (2021) Development of Hot Equal Channel Angular Processing (ECAP) consolidation technique in the production of Boron Carbide(B4C)-Reinforced Aluminium Chip (AA6061)-based composite. Int. Journal of Renewable Energy Development (IJRED), 10 (3). pp. 607-621. ISSN 2252-4940

Al-Azam, Sharaf Ahmed and Sarea, Hammed and Sulong, Muhammad Suhaimi (2021) Biometric authentication using fingerprint and keypad for door lock securtiy system. The Middle East International Journal for Social Sciences (MEIJSS), 3 (3). pp. 151-157.

Al-Gailani, Samir A. and Mohd Shah, Nor Shahida and Salem, Ali Ahmed and Algeelani, Nasir A. and Bantahar, Mohammed A. (2021) Performance evaluation of multiple-beam free space optics in tropical rainy weather. IEEE.

Albarkani, Mosab Sultan Saeed and Shafii, Haryati (2021) Construction safety and performance in Malaysian construction industry: a review. Journal of Technology Management and Business, 8 (2). pp. 79-93. ISSN 2289-7224

Alblooshi, Saeed Abdullatif (2021) Adoption of extended UTAUT model on e-learning in UAE higher education institutions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Aldarmaki, Obaid (2021) A framework for reducing turnover intention among police personnel in Abu Dhabi. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ali, Azita and Yazid, Siti Fatimah (2021) Development of 3D animated video first responder life support (Choking) for baby safety. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ali, Azita and Zulkifli, Wahida Afrina (2021) Three Dimension (3D) animation video development on dental care for children. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Ali Detho, Amir (2021) PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alias, Masek and Affero, Ismail and Suhaizal, Hashim and Salsabella, Mohd Fizol (2021) Defining students’ active participation in a group discussion session from different perspectives. Academia, 23 (24). pp. 67-84. ISSN 2241-1402

Alid, Nur Suhana and Ab. Aziz, Ruhaya (2021) Rizqi car rental booking system based on mobile applications. Penerbit UTHM, UTHM.

Alipal, J. and Lee, T. C. and Koshy, P. and Abdullah, H. Z. and Idris, M. I. (2021) Influence of altered Ca-P based electrolytes on the anodised titanium bioactivity. Surface & Coatings Technology, 412. pp. 1-12.

Alipal, J. and Mohd Pu’ad, N. A. S. and T. C., Lee and N.H.M Nayan, N.H M Nayan and N. Sahari, N. Sahari and H. Basri, H. Basri and M.I. Idris, M.I. Idris and Abdullah, H.Z. (2021) A review of gelatin: properties, sources, process, applications, and commercialisation. Materials Today: Proceedings, 42. pp. 240-250.

Alipal, J. and Mohd Pu’ad, N.A.S. and Nayan, N. H. M. and Sahari, N. and Abdullah, H. Z. and Idris, M. I. and T. C., Lee (2021) An updated review on surface functionalisation of titanium and its alloys for implants applications. Materials Today: Proceedings, 42. pp. 270-282.

Alwali Almazrouei, Abdulla Nasir Ali (2021) Developing a specialised strategy framework to improve performance in traffic department of Abu Dhabi Police. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Alzomor, A. and M. Rus, A. Z. and A. Wahab, H. and M. Salim, N. S. and Marsi, N. and Zulhakimie, M. A. and M. Farid, M. (2021) Dynamic mechanical analysis and morphology of petroleum-based and bio-epoxy foams with wood filler. In: Proceedings of Green Design and Manufacture 2020, (23–24 July 2020, Arau, Malaysia.

Ameen, Hussein Ali (2021) Real time collision warning system in the context of vehicle-to-vehicle data exchange based on drivings behaviours analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Aminuddin, Mohamad Yuzwan Aliff (2021) Mechanical and durability properties of sand cement brick containing recycled concrete aggregate and crumb rubber as partial sand replacement material. Masters thesis, Universiti Tun Hussein Malaysia.

Amir Hamzah, Diyana Izyan and Rusiman, Mohd Saifullah and Che Him, Norziha and Shafi, Muhammad Ammar and Alma, Ozlem Gurunlu and Suhartono, Suhartono (2021) A time series analysis for sales of chicken based food product. In: https://doi.org/10.1063/5.0053699, 1-2 December 2020, UTHM.

Amiruddin, Mohd Hasril and Sumarwati, Sri and Mahusin, Nor Asmida (2021) Pembangunan Alat Bahan Bantu Mengajar (ABBM) asas transfomer dalam mesin kimpalan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 23-38. ISBN 978-967-2975-67-0

Amiruddin, Mohd Hasril and Sumarwati, Sri and Rosly, Mohamad Rosalhafis (2021) Pembangunan prototaip asas automasi kimpalan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 39-52. ISBN 978-967-2975-67-0

Amri, Muhammad Hariz Adrian and Suhaili, Muhammad Izzat Hanafi and Mohktar, Aishatul Illia and Mohd Nor Bakri, Nurulhuda and Mohamed Nazri, Nurul Norfatin and Halim, Siti Noormashetah and Nathan, Shelena Soosay (2021) Road to 5g. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 23-35. ISBN 978-967-2389-28-6

Andleeb, Naima (2021) Factors affecting employee creativity in Islamic banking in Pakistan. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ang, Shin Yin (2021) Solving security staff scheduling by using genetic algorithm. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ang, Y. K. and Lee, M. F. (2021) Faktor-faktor yang mempengaruhi penguasaan sains dalam kalangan murid Sekolah Rendah Kebangsaan. In: Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam Malaysia (MEDC2020), 11-12/11/2020, USIM.

Ani, Fauziah and Md. Yusoff, Rosman and Damin, Zahrul Akmal and Rahman, Riki (2021) Reka Bentuk Penyelidikan Sains Sosial. Penerbit UTHM, Malaysia. ISBN 978-967-2975-74-8

Anjur, Norashikin and Sabran, Siti Fatimah and Mohd Daud, Hassan and Othman, Nor Zalina (2021) An update on the ornamental fish industry in Malaysia: Aeromonas hydrophila-associated disease and its treatment control. Veterinary World, 14. pp. 1143-1152. ISSN 0972-8988

Anjur, Norashikin and Sabran, Siti Fatimah and Mohd Daud, Hassan and Othman, Nor Zalina (2021) An update on the ornamental fish industry in Malaysia: Aeromonas hydrophila-associated disease and its treatment control. Veterinary World, 14. pp. 1143-1152. ISSN 0972-8988

Anwar Hussin, Mumtaz (2021) A comparative study on improvement of image compression method using hybrid of DCT and DWT techniques with huffman encoding. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Arif, Saba and Naqvi, Syed Muhammad Afzal and Gill, Fahad Tariq and Qadeer, Adil and Taweekun, Juntakan and Noranai, Zamri and Kalvin, Roman (2021) Effect of refrigeration assisted intercooler turbocharging on engine’s horse power effect of refrigeration assisted intercooler turbocharging on engine’s horse power. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 95-111.

Ariffin, Arihasnida and Nordian, Nur Fatin Nadiah and Hamzah, Norhasyimah and Zakaria, Normah and Rubani, Siti Nur Kamariah (2021) Hubungan antara sikap pelajar dengan tahap tekanan guru Program Pendidikan Inklusif dalam Pendidikan Teknikal dan Vokasional. Online Journal for TVET Practitioners, 6 (1). pp. 7-14.

Ariffin, Arihasnida and Rubani, Siti Nur Kamariah and Hamzah, Norhasyimah and Zakaria, Normah and Subramaniam, Tamil Selvan (2021) Kajian keperluan laman web e-LK berpandukan model Rekabentuk Hannafin Dan Peck. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 13-23. ISBN 978-967-2817-45-1

Arifin, Siti Nor Hidayah (2021) Photocatalytic degradation of triclocarban in artificial bathroom greywater by modified tio₂ nanotubes coated with zeolite (TNTs/ZEO). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Asad, Saira (2021) A comparative analysis of online alternative & mainstream newspapers in Malaysia & Pakistan during the 2018 general election. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Asmuin, N. and B., Basuno and Nor Salim, N. A. and Ramli, M. F. and Ariffin, L. M. and Yaakub, M. F. (2021) Horizontal axis wind turbine performance analysis. Progress in Aerospace and Aviation Technology, 1 (1). pp. 15-24.

Audu, Babagana (2021) Design and analysis of frequecy selective surface. Masters thesis, Universiti Tun Hussein Malaysia.

Augustin, Nyzveldo and Ab. Aziz, Ruhaya (2021) The development of pictorial dictionary for Learning Dusun Language. Penerbit UTHM, UTHM.

Austad, Azhan (2021) Development of conductive sheet composite based on kenaf fibre loaded with polyaniline for anti-static packaging application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Awang, Halizah and Kankia, Jamilu Danyaro and Roddin, Rohayu and Daud, Zawawi and Abd Rahman, Azmanirah and Yasak, Zurina (2021) Exploring a necessity of technical skills for an informal roadside metalwork fabrication apprenticeship practice. Journal of Technical Education and Training, 13 (1). pp. 119-127. ISSN 2229-8932

Azahar, Arman Hadi and Samsudin, Adam and Yep, Kow Wai and Zainal Abidin, Amar Faiz and Rifin, Rozi and Harun, Mohammad Haniff and Karis, Mohd. Safirin and Azmi, Ezzatul Farhain and Mohd. Nordin, Ili Najaa Aimi (2021) Application of Binary Firefly Algorithm (BFA) in tuning PID parameters for couple tank system. ARPN Journal of Engineering and Applied Sciences, 16 (7). pp. 757-761. ISSN 1819-6608

Azamir, Irwan Mazwan and Subramaniam, Tamil Selvan and Fairuz, Wan Mohamad (2021) Development of egg incubator monitoring system using thingspeak as database. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Azhar, Faiz Hafeez and Harun, Zawati and Hubadillah, Siti Khadijah and Raja Ahmad, Raja Adibah and Sazali, Norsuhailizah and Syamsul Bahri, Syamsutajri and Ibrahim, Siti Aida and Hussin, Rosniza (2021) Fabrication of mixed matrix membrane containing chlorophyll extracted from spinach for humic acid removal. Materials Today: Proceedings, 46. pp. 2058-2064.

Azhar, Nur Sabrina and Ahmad, Mazatusziha and Deong, Jing Lie (2021) The effect of silane treatment on nanosized carica papaya seed modified pullulan as biocoagulant in wastewater treatment. Journal of Chemical Health Risks, 11.

Azlan, Mawar Marisa and Abduh Algheethi, Adel Ali Saeed and Abdul Kadir, Aeslina (2021) Coloured dyes wastewater. In: Potential Technologies for Wastewater Treatment. Penerbit UTHM, UTHM, p. 48. ISBN 978-967-2975-56-4

Azman, Anis Zahirah (2021) Masked face detection system using google firebase. Masters thesis, Universiti Tun Hussein Malaysia.

Azman, Naqibah (2021) Establishment of checklist of design for safety (DfS), life cycle analysis (LCA) and design for manufacturing (DFM) for ivd medical device based on IEC 60601. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azman, Naqibah (2021) Establishment of checklist of design for safety (DfS), life-cycle analysis (LCA) and design for manufacturing (DFM) for IVD medical device based on IEC 60601. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Azmi, Mohammad Izzat Shaffiq (2021) The influence of cation exchange capacity towards electrical resistivity value for fine grained soil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

B

Bahari, Nur Aishah Zafirah and Osman, Mohamad Hairi and Mahyeddin, Mohd Eizzuddin (2021) Mechanical properties of concrete containing POFA and EPS as replacement materials. Progress in Engineering Application and Technology, 2 (1). pp. 275-284.

Baharom, Zulkhibri (2021) Microencapsulation of waste sunflower oil as natural self-healing corrosion agent for coating applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Baharuddin, Muhammad Nazrul Alif and Mohsin, Muhammad Izzuddin and Mohd Yazid, Muhammad Sahadan and Ramli, Muhammad Zulfahmi and Mohamad, Amir Imtiaz and Sh Salleh, Muhammad and Nathan, Shelena Soosay (2021) Mobile and business. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 66-78. ISBN 978-967-2389-28-6

Baharudin, Elfarizanis (2021) Microwave absorber based on biocomposites derived from agricultural wastes with reinforcement of poly lactic acid. Doctoral thesis, Universiti Putra Malaysia.

Bakari, Ibrahim Bala (2021) PGLDA: enhancing the precision of topic modelling using poisson gamma (PG) and latent dirichlet allocation (LDA) for text information retrieval. Doctoral thesis, Universiti Tun Hussein Malaysia.

Balakrishnan, Logavani and Ishak, Mohd Hafizal (2021) Competency requirement for effective property management in Malaysia. International Journal of Sustainable Construction Engineering and Technology, 12 (5). pp. 319-327. ISSN 2180-3242

Bano, Yasmeen and Omar, Siti Sarah and Ismail, Fadillah (2021) Revitalising organisations’ emergency succession planning in the face of the Covid-19 outbreak. The European Journal of Social and Behavioural Sciences.

Basheer, Huma (2021) A hybrid modified group method of data handling with the wavelet decomposition for oil palm price forecasting. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Bedor, Abu and Sarimah, Sarimah and Arasinah, Kamis and Sharifah, Shafie and Ahmad Puad, Farah Najwa and Rahimah, Jamaluddin and Mohd Bekri, Rahim and UNSPECIFIED (2021) Issues and trends in fashion education sustainability. Asian Journal of Vocational Education and Humanities, 2 (1). pp. 9-18.

Beh, S. Y. and D. Mahfut, I. W. B. and M. Juber, N. I. B. and Asman, S. and Yusoff, F. and N. M., Saleha (2021) Extraction of parabens from cosmetic and environmental water samples coupled with uv-visible spectroscopy. Journal of Applied Spectroscopy, 87 (6). pp. 1216-1223.

Beh, Shiuan Yih and Md Saleh, Noorashikin and Asman, Saliza (2021) Surfactant-functionalised magnetic ferum oxide coupled with high performance liquid chromatography for the extraction of phenol. The Royal Society of Chemistry, 13. pp. 607-619. (Submitted)

Benjamin, M. A. Z. and Abu Bakar, M. F. and Abu Bakar, F. I. and Sabran, S. F. and Kormin, F. and Mohamad Fuzi, S. F. Z. (2021) Development of bambangan (Mangifera pajang) carbonated drink. In: International Conference on Biodiversity 2020, 4 - 5 November 2020, Melaka, Malaysia.

Bhaumik, Prof. Dr. Amiya and Selvam, Dr. Janani and Vajravelu, Dr. Ashok (2021) Role of Chief Happiness Officer (CHO) interventions to improvement in environmental fit happiness. Journal of Hunan University（Natural Sciences）, 48 (10). pp. 906-920.

Birahim, Muhamad Fikri Shahkhirin (2021) Design and simulation of different excitation coil arrangements in magnetic particle imaging technique for single sided scanner. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Bohari, Azuwien Aida (2021) Advance control of Dual Active Bridge Multilevel Inverter (DABMI) with Open Winding Transformer (OWT) model. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Buhari, Rosnawati and Mohd Hizam, Nurul Nadiah (2021) Proses penjanaan profil permukaan jalanraya. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, pp. 25-28.

Buhari, Rosnawati and Nurul Nadiah binti Mohd Hizam, Nurul Nadiah binti Mohd Hizam (2021) Penjanaan profil permukaan jalan daripada data road scanner. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 29-35.

Buhari, Rosnawati and Sa’ain, Ameer Syzwan (2021) Effect of mixing sequencing on asphalt mixture. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 15-18.

Buwono, H. P. and Amrullah, U. S. and Takwim, R. N. A. and Kaavessina, M. and Nasir, N. F. (2021) High nickel deposition at low voltage electroplating process by a combination of anions. Journal of Advanced Manufacturing Technology (JAMT), 15 (3). ISSN 1985-3157

C

Chai, Kah Chun (2021) A new hybrid genetic algorithm-sarima-artificial neural network in forecasting Malaysian export amount of palm oil. Masters thesis, Universiti Tun Hussein Malaysia.

Chandran, Yutheish and Didane, Djamal Hissein and , Mohammed Ogab, Mohammed (2021) Assessment of wind energy potential at Gong Kedak and Pantai Chendering, Malaysia. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-7.

Charishun, Mohamad Rofiq and Yusof, Anizam Mohamed and Ab. Rahman, Azmanirah (2021) Simulation of mobile hybrid power generator system development and energy consumption monitoring applications. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 79-87. ISBN 978-967-2817-45-1

Che Haron, Roziha and Nasid Masrom, Md Asrul and Kamal, Khairani (2021) Assessing causes of contractual disputes from different type of condition of contracts. International Journal of Sustainable Construction Engineering and Technology, 11 (4). pp. 45-59. ISSN 2180-3242

Che Ibrahim, Che Intan Hartini and Abdullah, Aslam (2021) Selig airfoils: topology of flow patterns at low reynolds number. ARPN Journal of Engineering and Applied Sciences, 16 (24). pp. 2779-2788. ISSN 1819-6608

Che Mohd Zainudin, Wan Azra Balqis and Saringat, Mohd Zainuri (2021) Sistem pengurusan syukor batik menggunakan aplikasi mudah alih. Penerbit UTHM, UTHM.

Che Wan Razak, Che Wan Husna Syahirah (2021) Keberkesanan modul pengintegrasian teori penyelesaian masalah inventif dalam pembelajaran berasaskan masalah di UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

Chew, Eng Sun (2021) The effectiveness of the creativity trigger module in achieving higher levels of creative thinking among prospective teachers. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Chin Foo, Lee (2021) Management factors affecting time and cost performance of construction projects. Masters thesis, Universiti Tun Hussein Malaysia.

Chow, Xiang Quan and Ab Rahman, Nurul Hidayah (2021) A mobile forensic visualization tool for android data partition. Penerbit UTHM, UTHM.

D

D. Nagarajan, D. Nagarajan and Jacobb, Kavikumar and Mustapha, Aida and Boppana, Udaya Mouni and Chaini, Najihah (2021) Comparative analysis of filtering methods in fuzzy C-means: environment for DICOM image segmentation. In: Generative adversarial networks for image-to-image translation. Elsevier, pp. 81-98. ISBN 978-0-12-823519-5

Damin, Zahrul Akmal and Abdullah, Kamarulnizam and Fauzee, Mohd Sofian Omar (2021) Ethnic and religious tolerance: barrier factors and improvement measures based on Malay youth perspectives in Malaysia. Turkish Journal of Computer and Mathematics Education, 12 (2). pp. 622-635.

Damin, Zahrul Akmal and Isa, Khairunesa and Jaes, Lutfan and Abdul Kadir, Zulida and Abdul Rahman, Abdul Halim (2021) Analysis of stress contributing factors in work organizations in public institutions of higher learning. Journal of Social Transformation and Regional Development, 2 (3). pp. 11-23.

Damin, Zahrul Akmal and Isa, Khairunesa and Saleh, Nor Shela and Abdullah, Muhaymin Hakim and Ramlan, Najah (2021) The effect of Coronavirus Disease 2019 (Covid-19) towards consumer social well-being in Malaysia. Journal of Social Transformation and Regional Development, 2 (3). pp. 133-141.

Danjuma, Safyanu Bashir (2021) Conceptual design and multidisciplinary optimisation of power device for solar powered aircraft. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Danjuma, Safyanu Bashir and Omar, Zamri and Abdullah, Mohd Noor (2021) Design of power device sizing and integration for solar-powered aircraft application. Journal of Mechanical Engineering, 18 (3). pp. 215-232. ISSN 1823- 5514

Darsani, Adilah (2021) The fused deposition modeling of POFA reinforced composites polymer. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Deong, Jing Lie and Ahmad, Mazatusziha and Azhar, Nur Sabrina (2021) Comparative study on micronsized and nanosized carica papaya seed modified pullulan as biocoagulant in wastewater treatment. Solid State Phenomena, 317. pp. 276-282. ISSN 1662-9779

Deraman, Rafikullah and Mustaffa, Rabiatul Syahindah and Ismail, Mohd Hanif and Hasmori, Muhammad Fikri and Nagapan, Sasitharan (2021) The effect of metakaolin in production of low thermal conductivity cement sand brick. In: Sustainable Waste Utilization in Bricks, Concrete, and Cementitious Materials. Springer Link, pp. 1-19.

Ding, Lik Suong (2021) Experimental and simulation approaches for improving integrated circuit impedance characterisation under electrostatic discharge condition. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Diris, Siti Nur Fazirah and Abdul Rahman, Khairul Anuar and Rahim, Mohd Bekri and Razali, Nizamuddin and Gerijih, Debie Devisser (2021) Alat pengesan paras dan kualiti air sistem menara pendingin berbantukan IoT. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 78-87. ISBN 978-967-2975-67-0

Dounia, Melloul (2021) Design and control a myoelectric prosthetic limb for trans humeral amputation. Masters thesis, Universiti Tun Hussein Malaysia.

Dubey, M. K. and Tiwari, S. P. and Kavikumar, J. (2021) On the categories of L-Valued and Q-Valued 6 deterministic fuzzy automata. New Mathematics and Natural Computation, 17 (1). pp. 1-22.

Dubey, M. K. and Tiwari, S. P. and Kavikumar, J. (2021) On the categories of L-Valued and Q-Valued deterministic fuzzy automata. New Mathematics and Natural Computation, 17 (1). pp. 1-22.

E

Elsaid Ayousha, Abdelrahman Fathy (2021) Design and economic analysis of a grid-connected photovoltaic system for different types of solar panels in Saudi Arabia using pvsyst software. Masters thesis, Universiti Tun Hussein Malaysia.

Embong, R. and Kusbiantoro, A. and Muthusamy, K. and Ismail, N. (2021) Recycling of coal bottom ash (CBA) as cement and aggregate replacement material: a review. In: 4th National Conference on Wind & Earthquake Engineering, 10-14 Okt 2021, Orlando FL.

Embong, Rahimah and Kusbiantoro, Andri and Abd Wahab, Azrina and Muthusamy, Khairunisa (2021) Soluble pozzolanic materials from coal bottom ash as cement replacement material. In: Key Engineering Materials.

Esmail, Bashar Ali Farea (2021) Pattern reconfigurable metamaterial antenna for 5G base station network. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

F

Fadzil, Nur Farhan and Othman, Siti Amira (2021) Preparation and characterization of orange peels for commercial plastic: a review. International Journal of Advanced Research in Engineering Innovation, 3 (1). pp. 97-102.

Fadzil, Nur Syuhada (2021) Barriers and enablers in risk management practices in construction industry amongst bumiputera contractors. Masters thesis, Universiti Tun Hussein Malaysia.

Fakhri, Omar Mohammed (2021) A new empirical model to predict stress intensity factor for double interacting surface cracks located in hollow cylinder. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Farhan, Raed Nafea (2021) Utilization of online discussions to enhance students' engagement with William Golding's "Lord of The Flies". Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Fathoni, Achmad and Muhibbin, Ahmad and Arifin, Zainal and Habiby, Wahdan Najib and Ismail, Mohd Erfy (2021) Implementation of guidance and counselling services to Muhammadiyah elementary schools, Surakarta, provincial Central Java, Indonesia. Kasetsart Journal of Social Sciences, 42. pp. 177-184. ISSN 2452-3151

Fauzi, N. A. and Norazlimi, N. A. (2021) Foraging ecology of birds in mudflat area of Tanjung Laboh, Johor. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Fayyadh Alshammari, Mohammed Mahdi (2021) Convective boundary layer flow in generalized Newtonian nanofluid under various boundary conditions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Fernandez, Dahlia and Aman, Aini (2021) Planning for a successful Robotic Process Automation (RPA) Project: a case study. Journal of Information and Knowledge Management (JIKM), 11 (1). pp. 103-117.

Fong, Mun Kit (2021) Polycaprolactone (PCL) / polylactice acid (PLA) reinforced with polyethlene gylcol (PEG) and nano- hydroxyapatite (n-HA) for fused deposition modeling (FDM) composite filament. Masters thesis, Universiti Tun Hussein Malaysia.

Foo, Fong Ying and Nor, Maria Elena and Azli, Nor Amiratun Najwa (2021) Forecasting of water intake and supply in water plant in Johor. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

G

Ganasan, Reventheran (2021) Damage intensity class for reinforced concrete beam-column joint subjected to lateral cyclic loading. Doctoral thesis, University Of Malaya.

Gatea, Anwer Abdulhussein and Batcha, Mohd Faizal Mohideen (2021) Building energy index (BEI) of hospital buildings in Iraq: A case study. Songklanakarin J. Sci. Technol., 43 (6). pp. 1779-1785.

Ghadhban, Haitham Qutaiba (2021) Ensemble learning using multi-objective optimisation for arabic handwritten words. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ghazali, Ihwan and Abdul-Rashid, Salwa Hanim and Md Dawal, Siti Zawiah and Aoyama, Hideki and Sakundarini, Novita and Ho, Fu Haw and Herawan, Safarudin Gazali (2021) Green product preferences considering cultural influences: a comparison study between Malaysia and Indonesia. Management of Environmental Quality An International Journal, 32 (5). ISSN 1477-7835

Ghitheeth, Ali Hussein (2021) Thermal performance enhancement of a heat exchanger using metal chain as a novel turbulator. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Goh, Hui Hwang and He, Biliang and Hui Liu, Hui Liu and Zhang, Dongdong and Wei Dai, Wei Dai and Kurniawan, Tonni Agustiono and Goh, Kai Chen (2021) Multi-convolution feature extraction and recurrent neural network dependent model for short-term load forecasting. IEEE Access, 9. pp. 118528-118540. ISSN 2169-3536

Gopal Pillay, Khuneswari A/P and Ravieb, Tivya and Mohd Padzil, Siti Aisyah (2021) Comparison between best subset and lasso regression on consumer price index Malaysia. In: AIP Conference Proceedings, 18 Nov 2021.

Gopalakrishnan, Yashni (2021) Solar photocatalytic degradation of basic red 51 in hair dye bathroom greywater using zinc oxide nanoparticles synthesized with Corriandrum sativum leaf extract. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Gul, Muhammad Tayyab and Muhammad, Norhayati and Pauzi, Aslia Natasha and Abu Bakar, Mohd Fadzelly and A. Talip, Balkis and Abdullah, Norazlin and Abdul Rahim, Nur Fazira and Syukriah, Wan Nur Ain and Marzuki, Wan and B. Din, Laily and Ibrahime, Nazlina (2021) Evaluation of Phyllanthus niruri L. from Malaysia for In-vitro Anti-Urolithiatic properties by different solvent extraction. Pakistan Journal of Scientific and Industrial Research Series B: Biological Sciences, 64 (B (1)). pp. 81-86.

H

H., Muhammad Shafiq and M., Maryati (2021) Dinomyrmex gigas (Latreille, 1802): a potential icon for Taman Negara Johor Endau Rompin. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

H. Amiruddin, M. and Norhalis, M. F. and Sumarwati, Sri and Rashid, Y. Norma (2021) Dietary effect of red paprika used to enhance the coloration of red tilapia (oreochromis niloticus). Journal of Aquaculture and Fish Health, 10 (1). pp. 25-33.

Haddad, Meryana Zuhair and Yee, Mei Heong (2021) A systematic review of determining the input and output variables to measure the school efficiency by data envelope analysis method. Turkish Journal of Computer and Mathematics Education, 12 (12). pp. 4209-4222.

Haddad, Meryana Zuhair and Yee, Mei Heong (2021) A systematic review of determining the input and output variables to measure the school efficiency by data envelope analysis method. Turkish Journal of Computer and Mathematics Education, 12 (12). pp. 4209-4222.

Haddad, Meryana Zuhair and Yee, Mei Heong and Abdul Razzaq, Abdul Rasid and Tee, Tze Kiong (2021) Exploring the innovative methods for evaluating educational efficiency. In: 2021 International Conference on Decision Aid Sciences and Application (DASA), 7th – 8th December 2021, Online.

Hadid, Khattab Ibrahim (2021) The mediating effect of customer satisfaction on the relationship between digital banking service quality and customer loyaltytitle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hakim, A. M. and Samsudin, S. and Haffiz, A. A. (2021) Land alienation in the Johor Bahru district area: the factors of unsuccessful response of form 5a, national land code 1965. In: International Geography Seminar 2019, 31 August 2019, Indonesia.

Halim, Harliana (2021) Buletin PPUK Edisi Disember 2021. [Bulletin]

Halimoon, Hasrul and Mukhtar, Marina Ibrahim and Roddin, Rohayu (2021) Instrument’s validity and reliability for assessing teaching practicum: a case study in construction technology at vocational colleges. Journal of Technical Education and Training, 13 (3). pp. 162-171. ISSN 2229-8932

Hamdan, Nuraffefa and Yee, Mei Heong and Jailani, Azrol and Masran, Saiful Hadi and Boon Ching, Boon Ching and Tee, Tze Kiong and Mohamad, Mimi Mohaffyza (2021) Penggunaan gaya berfikir dan kemahiran berfikir aras tinggi bagi menyelesaikan masalah dalam penghasilan produk: analisis keperluan. Sains Insani, 6 (2). pp. 182-192.

Hamdan, Nuraffefa and Yee, Mei Heong and Jailani, Azrol and Masran, Saiful Hadi and Kok, Boon Ching and Tee, Tze Kiong and Mohamad, Mimi Mohaffyza (2021) Analisis keperluan gaya berfikir dan kemahiran berfikir aras tinggi bagi menyelesaikan masalah dalam penghasilan produk. In: Seminar Kebangsaan Majlis Dekan Pendidikan Universiti Awam Malaysia (MEDC2020), 12/11/2020, USIM.

Hamid, Su’aidi and Senan, Norhalina (2021) A personality career test for public secondary schools using android application. Penerbit UTHM, UTHM.

Hamid Yaseen, Maryam (2021) An integrated framework for lean production and marketing mix strategy toward business performance. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamizat, Nurul Hazirah (2021) The relationship between emotional intelligence and job performance: a case of O&G industry in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hamza, Sabah Salim (2021) Crashworthiness capability of jute and glass fibre reinforced epoxy tubes under quasi-static loading condition for automotive application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamza, Sabah Salim (2021) Crashworthiness capability of jute and glass fibre reinforced epoxy tubes under quasi-static loading condition for automotive application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Ayad Muslim (2021) Substrate integrated waveguide microwave antenna and filter design using H-fractal unit cell. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hamzah, Mohd Syahir Anwar and Ng, Celine and Abdul Sukora, Jumadi and Mohd Ali, Kamarul Syazwan and Mat Nayan, Nadirul Hasraf (2021) Electrospinning, preparation and characterization of polyvinylidene fluoride / pectin electrospun loaded with benzalkonium chloride as a drug reservoirs. Journal of Mechanical Engineering, 18 (1). pp. 39-51. ISSN 1823- 5514

Hamzah, Norhasyimah and Mohd Pauzi, Siti Hawa Shakirah and Rubani, Siti Nur Kamariah and Ariffin, Arihasnida (2021) Pembangunan aplikasi android subjek Teknologi Maklumat Dan Komunikasi Tahun Enam (6) bagi topik Penghasilan Dan Pengujian Atur Cara. In: Pembangunan produk & rekabentuk (product development & design). Penerbit UTHM, UTHM, pp. 1-12. ISBN 978-967-2817-45-1

Hamzah, Nurhafiza (2021) Model konsep pembelajaran e-talaqqi bagi pengajian ilmu-ilmu Islam. Doctoral thesis, Universiti Tun Hussein Malaysia.

Hamzah, Sofiah and Lau, Yuke Ying and Abd. Rahman Azmi, Alyza Azzura and Razali, Nurul Ashraf and Hairom, Nur Hanis Hayati and Mohamad, Nurul Aqilah and Che Harun, Mohammad Hakim (2021) Synthesis, characterisation and evaluation on the performance of ferrofluid for microplastic removal from synthetic and actual wastewater. Journal of Environmental Chemical Engineering, 9. pp. 1-8.

Haris, Norhidayah (2021) DNA metabarcoding and phytochemical analysis of plants consumed by banded langur (presbytis femoralis) in Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Hartatik, Nurani and Prasetijo, Joewono and Muslihati, Atqiya (2021) Blackspot analysis of road traffic crashes in Surabaya - Manyar Toll Road, East Java. In: ICETIA 2020, 15-16 DECEMBER 2021, WEBINAR.

Harun, Amran and Sulaiman, Melissa and Saupi, Norzaini and Md Yusoff, Rosman and Mohd Ali, Adi Syahid and Rashid, Umi Kartini (2021) What matters to Malaysian students retention: university image or external environment? Turkish Journal of Computer and Mathematics Education, 12 (2). pp. 743-754.

Harun, Hairuddin and Ismail, Lisa Mariam Syawal and Ismail, Nur Azrin (2021) Implementation of entrepreneurial skills among FPTV catering students. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 76-93. ISBN 978-967-2975-96-0

Harun, Hairuddin and Mohd Nasruddin, Muhammad Azri Hadi (2021) Level of knowledge and awareness of catering students at UTHM towards G6PD. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 57-6. ISBN 978-967-2975-96-0

Harun, Hairuddin and Mohd Zaini, Nurul Syahirah (2021) Perception on Desa Melayu apartment society towards Johor food heritage. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 109-117. ISBN 978-967-2975-96-0

Hasan, Syahzani Arifah and Ngajikin, Nor Hafizah and Yaacob, Maslina and Ali, Siti Hajar Aminah and Cholan, Noran Azizan (2021) Radio Frequency Identification (RFID) based cable detection system. Penerbit UTHM, UTHM.

Hasan Babtain, Hasan Abdulkarem (2021) Analyse the improvement of efficiency performance of monocrystalline by using water cooling system. Masters thesis, Universiti Tun Hussein Malaysia.

Hashim, Suhaizal (2021) Teknologi storan awan dalam lingkungan anda. Penerbit UTHM, UTHM.

Hashim, Suhaizal and Ismail, Mohd Erfy and Sa’adan, Nadzrah and Che Lah, Noor Hidayah and Ismail, Irwan Mahazir (2021) Favourable approach that influence autism students learning language process. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (5). pp. 1299-1312.

Hashim, Suhaizal and Masek, Alias and Mohd Mahthir, Bismi Nurnazatul Shima and A. Rashid, Ana Haziqah and Nincarean, Danakorn (2021) Association of interest, attitude and learning habit in mathematics learning towards enhancing students’ achievement. Indonesian Journal of Science & Technology, 6 (1). pp. 113-122. ISSN 2528-1410

Hashim Kareem, Zahraa (2021) Framework for pedestrian walking behaviour recognition to minimize road accident. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hashim Kareem, Zahraa (2021) Framework for pedestrian walking behaviour recognition to minimize road accident. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hassan, N. S. and Jalil, A. A. and Hussain, I. and Fauzi, A. A. and Azami, M. S. and Saravanan, R. and Hairom, N. H. H. (2021) Intensification of toxic chlorophenolic compounds degradation over efficient microwave-dried silica-doped tetragonal zirconia nanocatalysts. Chemical Engineering and Processing - Process Intensification, 165. pp. 1-10. ISSN 0255-2701

Heriansyah, Rudi and Utomo, Wahyu Mulyo (2021) Performance evaluation of digital image processing by using scilab. JUITA: Jurnal Informatika, 9 (2). pp. 239-247. ISSN 579-8901

Ho, Choon Sin (2021) Characterisation of deformation behaviour and damage progression of recycled aluminium alloy AA6061. Doctoral thesis, Universiti Tun Hussein Malaysia.

Ho, Lai Ming and Saringat, Mohd Zainuri (2021) Ixora apartment repair management system. Penerbit UTHM, UTHM.

Ho Chee Leong, Richmond Chris and Zulkipli, Muhammad and Shaari, Muhammad Farid (2021) Design of a low cost coin acceptor for vending machine. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Hong, Fan Wei (2021) Near infrared diffuse reflectance measurement set-up in non-destructive brix measurement for intact pineapples. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Hos, Jamaluddin and Kusujiarti, Siti and Jumintono, Jumintono and Ambo Upe, Ambo Upe and Muhammad Arsyad, Muhammad Arsyad and Hasniah, Hasniah and Firdaus Yuni Dharta, Firdaus Yuni Dharta and Jemma Natanson, Jemma Natanson (2021) Confict management in multiethnic communities: a case study in Southeast Sulawesi, Indonesia. Journal of International Migration and Integration.

Hui, Hwang Goh and Luo, Qinwen and Zhang, Dongdong and Dai, Wei and Chee, Shen Lim and Kurniawan, Tonni Agustiono and Kai, Chen Goh (2021) A hybrid SDS and WPT-IBBO-DNM based model for ultra-short term photovoltaic prediction. CSEE Journal of Power and Energy Systems. pp. 1-12.

Hujale Ibrahim, Abdishakur Ali (2021) RF energy harvesting antenna. Masters thesis, Universiti Tun Hussein Malaysia.

Husain, Siti Nor Hawanis (2021) Physical and mechanical properties of cotton waste nonwoven web produced by needle punching method. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Husen Ismail, Faisal and Kirin, Arwansyah and Mohammad, Che adenan and Borham, Abd Shakor and Masruri, Muhammad (2021) Kajian meta-analisis inovasi pengajaran usul fiqh di Indonesia. Hudan Lin-Naas, 2 (1). pp. 21-44. ISSN 2580-3409

Husin, Nor Aniisah and Muhamad, Musthahimah and Yahaya, Noorfatimah and Miskam, Mazidatulakmam and Nik Mohamed Kamal, Nik Nur Syazni and Asman, Saliza and Raoov, Muggundha and Mohamad Zain, Nur Nadhirah (2021) Application of a new choline-imidazole based deep eutectic solvents in hybrid magnetic molecularly imprinted polymer for efficient and selective removal of naproxen from aqueous samples. Materials Chemistry and Physics, 261. pp. 1-15. ISSN 0254-0584

Hussain, Ghasan Ali (2021) A novel BCS code in F-OFDM system: a promising candidate for 5G wireless communication systems. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Hussein, Ahmed Mohamud (2021) Antenna coupled resonator for biosensing application. Masters thesis, Universiti Tun Hussein Malaysia.

Hussin, Mohamed Saiful Firdaus and Mohd Serah, Aludin and Azlan, Khairul Azri and Abdullah, Hasan Zuhudi and Idris, Maizlinda Izwana and Ghazali, Ihwan and Mohd Shariff, Amir Husni and Nurul Huda, Nurul Huda and Azrul Abidin Zakaria, Azrul Abidin Zakaria (2021) A bibliometric analysis of the global trend of using alginate, gelatine, and hydroxyapatite for bone tissue regeneration applications. Polymers, 13 (647). pp. 1-17. ISSN 2073-4360

Hussin, Muhammad Nur Aizat and Yunus, Faizal Amin Nur and Rahim, Mohd Bekri and Razali, Nizamuddin and Rozali, Mohd. Zulfadli and Abdulrahman, Khairul Anuar and Baharudin, Nurhayati (2021) The development of egg hatching and storage machines equipped with cooling and heating systems and iot. Research and Innovation in Technical and Vocational Education and Training, 1 (1). 023-032.

Hussin, R. and Anuar, S. Z. S. and Ibharim, S. A. and Kamdi, Z. and Ainuddin, A. R. and Harun, Z. (2021) Deposition of ZnO-Al (AZO) thin films for optical properties. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Huzaisham, Nur Athirah (2021) The characterization of thermoplastic starch (TPS) reinforced with banana peel (BP) Polymer composites. Masters thesis, Universiti Tun Hussein Onn Malaysia.

I

Ibraheem, Mohammed Khalid (2021) Modelling and developing of microstrip rotman lens based on electric field analysis and defected ground structure. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ibrahim, Abdul Malek (2021) Buletin Pusat Wakaf & Endowmen Edisi 7 / Disember 2021. [Bulletin]

Ibrahim, Badaruddin and Nordin, Mohd Norazmi and Mustafa, Mohamad Zaid and Abdul Razzaq, Abdul Rasid (2021) Special education need the true leadership: the review. Turkish Journal of Physiotherapy and Rehabilitation, 32 (3). pp. 1622-1628. ISSN 2651-4451

Ibrahim, Rosziati and Asri, N. A. M. and Jamel, Sapiee and Abdul Wahab, Jahari (2021) Validation of requirements for transformation of an urban district to a smart city. (IJACSA) International Journal of Advanced Computer Science and Applications, 12 (7). pp. 322-328.

Ibrahim Awada, Nesreen (2021) Happiness and employee performance: the moderating role of employee spirituality and emotional wellness. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ibus, Salbeha (2021) The role of self-efficacy in mediating the effect of selfleadership and knowledge sharing towards innovative work behaviour in private higher education institutions. Doctoral thesis, Universiti Tun Hussein Malaysia.

Idris, M. K. M. and Nasir, S. H. and Roslan, M. N. (2021) The effect of fabric constructions on elastic behaviour and tension decay of compression garment. In: AIP Conference Proceedings.

Idrus, Nurusyuhadah and Pa’ee, Furzani (2021) Formulation of capsuled herbal mixture using zingiber officinale and labisia pumila for postnatal care. Enhanced Knowledge in Sciences and Technology, 1 (1). pp. 1-7.

Idrus, Nurusyuhadah and Pa’ee, Furzani (2021) Formulation of capsuled herbal mixture using zingiber officinale and labisia pumila for postnatal care. Enhanced Knowledge in Sciences and Technology, 1 (1). pp. 1-7.

Iliyas Ahmad, Maznah (2021) Integrated monitoring system based on service-oriented IOT architecture in open step-nc environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Imran, H. and Rani, Ridhwan and Zulfadhli, S. M. and Qibtiah, Raja Mariatul and Azraai, Munirah (2021) Development of intelligent active steering with fuzzy, PID controller and uncontrolled. REVIEW OF INTERNATIONAL GEOGRAPHICAL EDUCATION, 11 (7). pp. 582-595. ISSN 2146-0353

Indran, Taruna Kugan and James, Stephen Raj and Satiakumar, Mohishaa and Ishak, Muhammad Isham Fareez and Ismail, Nurul Fatin Athirah and Nathan, Shelena Soosay (2021) Integration of cellular network and wireless LAN. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 36-53. ISBN 978-967-2389-28-6

Isah, Abdulnasir and Chang, Phang (2021) Shifted genocchi polynomials operational matrix for solving fractional order stiff system. In: ICMSCT 2021, May 29- June 2 2022, Canada.

Isah, Abdulnasir and Chang Phang, Chang Phang (2021) Shifted genocchi polynomials operational matrix for solving fractional order stiff system. In: 241st ECS Meeting, May 29- June 2 2022, Canada.

Ishak, Nurfarahin (2021) Measurement of agarwood using magnetic induction mechanism. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ishfaq, Rahila (2021) Synthesis and characterization of metal sulfates loaded palm empty fruit bunch for biodiesel production. Masters thesis, Universiti Tun Hussein Malaysia.

Ismail, Fadillah and Abdul Kadir, Adibah (2021) Personaliti big five dengan prestasi kerja pengurusan sumber manusia. Human Sustainability Procedia, 1 (1). pp. 29-44.

Ismail, Fadillah and Mohd Rosli, Nur Amalina (2021) Pengaruh kecerdasan emosional dengan Organizational Citizenship Behavior (OCB) dalam kalangan Pegawai Sumber Manusia. Human Sustainability Procedia, 1 (1). pp. 18-28.

Ismail, Faisal Husen and Kirin, Arwansyah and Borham, Abd Shakor and Misbah, Muhammad and Abdul Rahim, Mohd Hisyam and Masruri, Muhammad (2021) Konsep terapi Nabi SAW sebagai alternatif dalam menangani penyakit fizikal dan spiritual. Al-Hikmah International Journal of Islamic Studies and Human Sciences, 4 (1).

Ismail, Iman Fitri and Mas Fawzi, Mas Fawzi and Wan Jamaludin, Wan Akashah and Madon, Rais Hanizam and Abdullah, Ahmad Fauzan and Abdullah, Mohamad Ashik (2021) Development of a lock biometric authentication system for a battery powered locking device. The International Journal of Integrated Engineering, 13 (2). pp. 16-23. ISSN 2229-838X

Ismail, Lisa Mariam Syawal and Tukiran, Nor Anis Intan Aqiah and Mohd Nasir, Muhammad Nur Hazim (2021) Sanitation and safety while conducting a practical class among Undergraduate Vocational Education (Catering), UTHM. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 118-129. ISBN 978-967-2975-96-0

Ismail, Lisa Mariam Syawal and Tukiran, Nor Anis Intan Aqiah and Zakariah, Siti Hajar and Ahmad, Nor Aziah (2021) Perception of local tourists towards safety practices in Malacca city. JOURNAL OF TOURISM, HOSPITALITY AND ENVIRONMENT MANAGEMENT, 6 (26). pp. 332-340.

Ismail, Lisa Mariam Syawal and Zakariah, Siti Hajar and Tukiran, Nor Anis Intan Aqiah and Md Sahak, Adibah Aishah and Husin, Ainina Mastura (2021) Food handler’s perception on food handling course. Penerbit UTHM, UTHM.

Ismail, Muammar Mukhsin (2021) Knock phenomenon analysis on a diesel-CNG dual fuel engine using experimental fuel ratio. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ismail, Nasarudin (2021) Void avoidance opportunistic routing density rank based for underwater sensor networks. Doctoral thesis, Universiti Teknologi Malaysia.

Ismail, Syamhanim and Mohamad, Mimi Mohaffyza and Mohd Faiz, Nur Sofurah (2021) A tie between educational institution and industry: a case study of benefit from work-based learning. Journal of Technical Education and Training, 13 (1). pp. 128-138.

Isradi, Muhammad and Baskoro, Imam Sindu and Prasetijo, Jaewono and Sumiyati, Sumiyati (2021) The effect of variations of cese waste waste levels on marshall parameters in Ac-Wc Layer. Journal of world Conference, 3 (2). pp. 177-182.

Isradi, Muhammad and Baskoro, Imam Sindu and Prasetijo, Jaewono and Sumiyati, Sumiyati (2021) The effect of variations of cese waste waste levels on marshall parameters in Ac-Wc layer. Journal Of World Conference, 3 (2). pp. 177-182.

Isradi, Muhammad and Tarastanty, Nandhita Aulia and Dermawan, Widodo Budi and Mufhidin, Amar and Prasetijo, Joewono (2021) Performance analysis of road section and unsignalized intersections on Jalan Cileungsi Setu and Jalan Raya Narogong. International Journal of Engineering, Science & InformationTechnology (IJESTY), 1 (2). pp. 72-80.

J

J., Jumintono and S., Alkubaisy and D., Yánez Silva and K., Singh and A., Turki Jali and S., Mutia Syarifah and Y., Fakri Mustafa and I., Mikolaychik and L., Morozova and M., Derkho (2021) Effect of cystamine on sperm and antioxidant parameters of ram semen stored at 4 °C for 50 hours. Archives of Razi Institute, 76 (4). pp. 1115-1123.

Jaafar, Mohd Arafat and Abdullah, Noor Azlin and Jamaludin, Mohd Sabri and Haji Ab Ghani, Muhamad Amin and Nordin, Mohd Norazmi (2021) Unique attitude? The concept of special education leadership. Turkish Journal of Computer and Mathematics Education, 12 (11). pp. 5192-5196.

Jaafar, Razi (2021) Tahap kesedaran terhadap pelan integriti Polis Diraja Malaysia 2016-2020 dalam kalangan pegawai polis di Daerah Klang, Selangor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jaat, Norrizam and Azizul, Muhamad Asri and Khalid, Amir and Ahmad Jais, Mohamad Harizat and Zainal Abidin, Shaiful Fadzil and Mustaffa, Norrizal and Ishak, Izuan Amin and Manshoor, Bukhari and Didane, Djamal Hissein and Zahari, Izzarief (2021) Investigation of performance characteristics of plastic pyrolysis oil and crude palm oil fuel on diesel engine. International Journal of Engineering Trends and Technology, 69 (12). ISSN 2231-5381

Jabbar, Abdullah Hasan (2021) Physical and biological characteristics of silver/ polyvinylpyrrolidone nanocomposite using pandanus atrocarpus. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jaber, Ayad Jasim (2021) Performance enhancement of the photovoltaic cells system by using the pneumatic routers. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jaes, Lutfan and Razali, Nurul Aimi and Mohd Yusof, Asyraf Maula and Mohd Suhaimyd, Khairul Azman (2021) 100 days of Muhyiddin’s Government leadership: a manifestation of the continuity of paternalism values. Turkish Journal of Computer and Mathematics Education, 12 (2). pp. 755-763.

Jaharia, Puteri Nur Syahzanani and Mohd Azman, Shahfiz and Munian, Kaviarasu and Zakaria, Nur Alwani and R. Richterd, Stine and Omar, Mohd Shahir Shamsir and Mohd Salleha, Faezah (2021) The first mitochondrial genome data of an old world fruit bat, Cynopterus sphinx from Malaysia. Mitochondrial DNA (Part B), 6 (1). pp. 53-55.

Jaharudin, Nurul Atika Nabila (2021) Remote temperature sensing with low-threshold-power using erbium-doped fiber laser. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jalil, Mohd Ezwan and A. Rahim, Mohamad Kamal and Mohamed, Himdi and Samsuri, Noor Asmawati and Murad, Noor Asniza and Dewan, Raimi and A. Majid, Huda and Mohamed Nafis, Nur Biha and Nur, Levy Olivia and Nugroho, Bambang Setia (2021) High capacity and miniaturized flexible chipless RFID tag using modified complementary split ring resonator. IEEE Access, 9. pp. 33929-33943.

Jalim, Mohammad Idham and Abdul Razzaq, Abdul Rasid and Syed A. Kadir, Syed Shikh and Jumintono, Jumintono (2021) Self-image, career development and job choice on tourism industry in Malaysia: a perception of students. Educational Administration: Theory and Practice, 27 (4). pp. 1197-1203.

Jama, Amar Abdi (2021) Analysing small scale distribution generation PV and wind system in islanded mode. Masters thesis, Universiti Tun Hussein Malaysia.

Jamaluddin, N. A. and Talib, N. and A. Sani, A. S. (2021) Experimental analysis of tribological performance of modified jatropha oil enriched with nanoparticle additives for machining application. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Jamaluddin, Nor Athira (2021) Tribological performance of jatropha oil-based nanofluids for orthogonal cutting process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jamaluddin, Nor Athira and Talib, Norfazillah and Abdul Sani, Amiril Sahab (2021) Performance comparative of modified jatropha based nanofluids in orthogonal cutting process. Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (2). pp. 461-468.

Jamaludin, Liyana and Abd Razak, Rafiza and Abdullah, Mohd Mustafa Al Bakri and Kusbiantoro, Andri (2021) Geopolymer coating paste on concrete for photocatalytic performance. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Jameel, Alaa Salam (2021) The effect of leadership style and organizational justice on the performance of Iraqi Academic Staff. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jamellodin, Zalipah and Abd Hamid, Hairu Azila and Abdul Hamid, Noor Azlina and Salleh, Norhafizah and Adnan, Suraya Hani (2021) The effect of curing conditions on the strength of masonry blocks incorporating palm oil fuel ash. Penerbit UTHM, UTHM.

Jamil, Dzuliana Fatin and Saleem, S. and Roslan, Rozaini and Al-Mubaddel, Fahad S. and Gorji, Mohammad Rahimi and Issakhov, Alibek and Ud Din, Salah (2021) Analysis of non-newtonian magnetic casson blood flow in an inclined stenosed artery using caputo-fabrizio fractional derivatives. Computer Methods and Programs in Biomedicine, 203. pp. 1-11. ISSN 0169-2607

Jamil, Dzuliana Fatin and Uddin, Salah and Kamardan, Muhamad Ghazali and Roslan, Rozaini (2021) The effects of magnetic casson blood flow in an inclined multi-stenosed artery by using caputo-fabrizio fractional derivatives. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 82 (1). pp. 28-38. ISSN 2289-7879

Jamil, Norsyahrina and Yasak, Zurina (2021) Development of augmented reality application for chemical bond. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Jamil, Nur Izzah and Che Him, Norziha and Mohd Hamdan, Siti Fatimah Az-Zahra and Rusiman, Mohd Saifullah (2021) Epidemiology trend with particular spatio-temporal distribution of DIR in Malaysia. In: SCIEMATHIC 2020, 1-2 DEC 2020, UTHM.

Janis, Ilyana (2021) Exploring technician competency requirements in industry 4.0 apparel shop floor production. Doctoral thesis, Universiti Tun Hussein Malaysia.

Janis, Ilyana and Paimin, Aini Nazura and Alias, Maizam (2021) Exploring the theoretical gap on knowledge work of knowledge and skilled worker in TVET practices : a literature review. Journal of Technical Education and Training, 13 (4). pp. 92-105. ISSN 2229-8932

Japri, Nur Athira and Basri, Srimazzura and Mamat, Mustafa (2021) New modification of the hestenes-stiefel with strong wolfe line search. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

Jasim, Mohammed Jamal (2021) The potential of porcelain waste as sand replacement to produce high strength concrete. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jasrin, Nurin Saqinah and Othman, Siti Amira and Nor Azman, Nor Farah Amirah and Abu Bakar, Nurul Fathihah (2021) Basic of Fault Tree (FT) method. Enhanced Knowledge in Sciences and Technology, 1 (1). pp. 15-20.

Jayapalan, Mohana Phriya (2021) Development of computer aided design system based on artificial neural network for macular hole detection. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Jenal, Mahyuzie (2021) A new three phase 6-slots 10-poles permanent magnet flux switching machine with inner rotor configuration. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jenal, Mahyuzie (2021) A new three-phase 6-slots 10-poles permanent magnet flux switching machine with inner rotor configuration. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Jofri, Muhamad Hanif (2021) A quality of experience approach in smartphone video selection framework for energy efficiency. Doctoral thesis, Universiti Tun Hussein Malaysia.

Johar, Siti Sarawati and Isa, Khairunesa (2021) Psikologi seni pengurusan - momentum dinamika organisasi. Penerbit UTHM, UTHM.

Johari, Nurul Nadia (2021) Particle size and preloading pressure Relationship on the consolidation properties of peat soil. Masters thesis, Universiti Tun Hussein Malaysia.

Jong, Oi Ka (2021) Determination of tensile properties and moisture effect of areca leaf sheath subjected to flattening process. Masters thesis, Universiti Tun Hussein Malaysia.

Jong, Sze Hui and Abdullah, Norazlin and Muhammad, Norhayati (2021) Characterisation of pectins extracted from different parts of Malaysian Durian rinds. Research Journal of Chemistry and Environment, 25 (7). pp. 98-103.

Jong, Sze Hui and Abdullah, Norazlin and Muhammad, Norhayati (2021) Characterisation of pectins extracted from different parts of Malaysian durian rinds. Research Journal of Chemistry and Environment, 25 (7). pp. 98-103.

Juarah, N. and Surugau, N. and Rusdi, N. A. and Abu-Bakar, M. F. and Suleiman, M. (2021) Phytochemical content and antioxidant properties of Bornean wild durian from Sabah. In: International Conference on Biodiversity 2020, 4 - 5 November 2020, Melaka, Malaysia.

Jumintono, Jumintono and Devi, Fransiska Sinta and Emmy Hamidah, Emmy Hamidah and Wahyu Santoso, Wahyu Santoso (2021) Easily understanding on post-harvest handling subject through video-based learning: a study on Agriculture Students at UiTM Melaka, Malaysia. Educational Administration: Theory and Practice, 27 (4). pp. 1190-1196.

Jum’azulhisham, Abdul Shukor and Muhammad Al-Hapis, Abdul Razak and Azmi, Hassan and Jamian, Rahim (2021) Application of clean agents in fire suppression systems: an overview. In: Progress in Engineering Technology III. Springer, pp. 315-330.

Junaidi, Amirul Asyraf and Mahyeddin, Mohd Eizzuddin and Abdul Rahman, Mohammad Ashraf (2021) A study comparison of different aggregate between concrete mixture with processed recycled waste and conventional concrete mixture with gravel. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

K

K Frhan, Nhad (2021) CFD investigation on hydrogen enrichment effect to dual-fuel direct injection diesel engine. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

K., Adam and A. Wahid, M. (2021) On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled Swirl Flameless Combustor (SFC). EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (1). pp. 117-122.

K., Adam and M. A., Wahid (2021) On the effects of tangential air inlets distribution configurations to the combustion characteristics of a direct injection liquid fueled Swirl Flameless Combustor (SFC). EVERGREEN Joint Journal of Novel Carbon Resource Sciences & Green Asia Strategy, 8 (1). pp. 117-122.

K. Subramaniam, K. Subramaniam and Wan Salim, W. S. I. (2021) Modelling an electrically turbocharged engine and predicting the performance under steady-state engine. International Journal of Automotive and Mechanical Engineering (IJAME), 18 (4). pp. 944-9252. ISSN 2229-8649

Ka Jong, Ka Jong and Nasharidan, Siti Adayu and Abdul Rashid, Azrin Hani and Main, Nor Mazlana and Yong, Tze Mi and Roslan, Mohd Nazrul and Masrol, Shaiful Rizal (2021) Factorial analysis of tensile properties of Areca Leaf Sheath (ALS) subjected to flattening. The International Journal of Integrated Engineering, 13 (2). pp. 82-89. ISSN 2229-838X

Kaharuddin, Liyana Nadhira (2021) Numerical solution for fractionalorder logistic equation. Masters thesis, Universiti Tun Hussein Malaysia.

Kaliannan, Suaathi (2021) Structural equation modelling of construction waste root causes and waste generation rate in Malaysian construction industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kaliappan, Anusuya and Hamid, Hashima (2021) Green Technology: a must or a need in TVET Education in Malaysia? Journal of Technical Education and Training, 13 (1). pp. 86-96. ISSN 2229-8932

Kamaludin, Nur Najwa Atirah and Ismail, Fadillah (2021) Maintain a culture of integrity at workplace during COVID-19 outbreak. Jurnal Penyelidikan Sains Sosial (JOSSR), 4 (10). pp. 15-20.

Kamardin, Ili Liyana Khairunnisa (2021) Low-temperature growth of zinc oxide structures on flexible conductive substrate: effect of NaOH and C7H8O9 presence in solgel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Kamardin, Ili Liyana Khairunnisa (2021) Low-temperature growth of zinc oxide structures on flexible conductive substrate: effect of naoh and C7H8O9 presence in sol-gel. Masters thesis, Universiti Tun Hussein Malaysia.

Kamarudin, Noor Hasliza and Harun, Zawati and Hussain, Rosniza and Jamalludin, Mohd Riduan and Hubadillah, Siti Khadijah and Alias, Siti Salwa and Bahri, Syamsutajri Syamsul and Sazali, Nursuhailizah and Mohd Akhair, Siti Hajar (2021) Toughening of ceramic shell mould with rice husk fiber (CSm-RH) to improve strength property and mould performance. Emerging Advances in Integrated Technology, 2 (2). pp. 43-49.

Kamarudin, Nurul Anis Syahira and Mohd Nordin, Ili Najaa Aimi and Misman, Dalila and Khamis, Nurulaqilla and Muhammad Razif, Muhammad Rusydi and Mohd Noh, Faridah Hanim (2021) Development of water surface mobile garbage collector robot. Journal of Agriculture Science Alinteri, 36 (1). pp. 534-540.

Kamisan, Nur A. and Lee, Muhammad H. and Hassan, Siti F. and Norrulashikin, Siti M. and Nor, Maria E. and A. Rahman, Nur H. (2021) Forecasting wind speed data by using a combination of ARIMA model with single exponential smoothing. Mathematical Modelling of Engineering Problems, 8 (2). pp. 207-212. (Submitted)

Kamsan, Siti Zulalina and Mohd Affandi, Nur Iman and Mohd Nazri, Nurul Athirah and Jailani, Nureen Syafiqah and Sundramorthy, Saranya and Rajasakar, Kirthana and Nathan, Shelena Soosay (2021) Mobile application challenges. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 1-9. ISBN 978-967-2389-28-6 (Submitted)

Kareem, Ali Kamil (2021) Parametric optimization of the femoropopliteal artery stent design based on numerical analysis. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kasmin, A. and Masood, I. and Abdul Rahman, N. and Abdul Kadir, A. H. and Abdol Rahman, M. N. (2021) Control chart pattern recognition using small window size for identifying bivariate process mean shifts. The International Journal of Integrated Engineering, 13 (2). pp. 208-213. ISSN 2229-838X

Kassim, Rahimah (2021) Cloud Computing based Learning Management System (CC-LMS) implementation model in Malaysia Higher Education Institutions. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kazeem, A. and Badarulzaman, N. A. and Wan Ali, W. F. F. and Dagaci, M. Z. and Jikan, S. S. (2021) Effect of heat treatment modification on the tensile strength and microstructure of X7475 al-alloy fabricated from Recycled Beverage Cans (RBCs) for bumper beam applications. In: Recycling of Plastics, Metals, and Their Composites. CRC Press.

Kazeem, Abubakar and H. Rady, Mohammed and Badarulzaman, Nur Azam and Wan Ali, Wan Fahmin Faiz and Suhaimi, Mohd Azlan and Jikan, Suzi S. and Abd Rahim, Shayfull Zamree and Sharif, Safian (2021) Effect of processing conditions on the fracture behavior of Al-5Zn�1.5Mg-1.0Mn-0.35Cu alloy fabricated from recycled beverage cans (RBCs) for bumper beam applications. Weldpro Sales & Services S/B.

Keerio, Nazia (2021) The role of organisational culture during the implementation of internal succession planning within Malaysian research universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kek, Sie Long and Sim, Sy Yi and Yee Chen, Yee Chen (2021) Testing of linear models for optimal control of second-order dynamical system based on model-reality differences. Results in Control and Optimization, 4. pp. 1-12.

Kek, Sie Long and Sy, Sy Yi and Chuei, Yee Chen (2021) Testing of linear models for optimal control of second-order dynamical system based on model-reality differences. Results in Control and Optimization, 4. pp. 1-12.

Khairulfuaad, Riyadhthusollehan (2021) Computational analysis on micro-shunt of minimally invasive glaucoma-surgery (MIGS) in severe glaucoma. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khalifa Alyousif Alsuwaidi, Khawla Ahmed (2021) The effect of managerial creativity and innovative leadership towards school performance in UAE. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khamis, Nur Syahirah Nissa and Zainal, Rozlin and Musa, Sharifah Meryam Shareh and Kasim, Narimah (2021) Adaptation of thermal comfort in naturally ventilated students residential college in tropical climates of Malaysia. International Journal of Engineering Technology Research & Management, 5 (6). pp. 151-158. ISSN 2456-9348

Khan, Zohaib (2021) Barriers factor of ISO 9001:2015 implementation in the manufacturing industry of Pakistan. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Khoo, Weily (2021) Electrospun fish skin gelatin scaffolds for functional tissue engineering of articular cartilage. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Kirin, Arwansyah and Husen Isma’il, Faisal and Masruri, Muhammad and Marpuah, Siti and Mohammad, Che Adenan (2021) Pengajaran dan pembelajaran metode face to face dan Pjj online: perbandingan dan impak terhadap students UTHM Johor Malaysia semasa pandemi Covid-19. Jurnal Studi Guru dan Pembelajaran, 4 (1). pp. 206-217. ISSN 2654-6477

Kirin, Arwansyah and Siti Marpuah, Siti Marpuah and Muhammad Masruri, Muhammad Masruri (2021) Hadis Da’if Dan Mawdu’ dalam Kitab Nasa’ih Al-‘Ibad oleh Nawawi Banten : analisa terhadap konten hadis. [Bulletin]

Kirin, Arwansyah and Wan Zahari, Wan Ainaa Mardhiah and Husen Ismail, Faisal and Marpuah, Siti and Ahmade, Norhafizah and Borham, Abdul Shakor (2021) Analysis of Da’if & Mawdu’ Hadith in the Book of Ta’lim Al-Muta’allim by Shaykh Al-Zarnuji. Turkish Journal of Computer and Mathematics Education, 12 (2). pp. 614-621.

Koh, Xin Yin and Hafit, Hanayanti (2021) Improving data management at recycle center by using waste management system. Penerbit UTHM, UTHM.

Kok, Keong Choong and Jaganathan, Jayaprakash and Mohd Zuki, Sharifah Salwa and Shahidan, Shahiron and Ramzi Hannan, Nurul Izzati Raihan (2021) Concrete-filled double skin steel tubular column with hybrid fibre reinforced polymer post fire repair. Springer, Springer Singapore. ISBN 978-981-16-2714-9

Krishnan, Puganesri (2021) Kemahiran pemikiran komputasional pelajar melalui modul pembelajaran berasaskan teknologi internet pelbagai benda. Masters thesis, Universiti Tun Hussein Malaysia.

L

L. P., Teh and H. D., Setiabudi and S. N., Timmiati and M. A. A., Aziz and N. H. R., Annuar and N. N., Ruslan (2021) Recent progress in ceria-based catalysts for the dry reforming of methane: a review. Chemical Engineering Science, 242. pp. 1-17. ISSN 0009-2509

Lakhiara, Muhammad Tahir and Mohamad, Noridah and Abdul Samad, Abdul Aziz and Muthusamy, Khairunisa and Mydin, Md Azree Othuman and Goh, W. I. and George, Steafenie (2021) Effect of banana skin powder and coir fibre on properties and flexural behaviour of precast SCC beam. International Journal of Sustainable Engineering, 14 (5). pp. 1193-1206.

Lathamaheswari, M. and Nagarajan, D. and Kavikumar, J. and Broumi, Said (2021) Interval type‑2 fuzzy aggregation operator in decision making and its application. Complex & Intelligent Systems.

Lee, Jocelyn Ke Yin and Gholami, Hamed and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal and Zakuan, Norhayati and Mahmood, Salwa and Omain, Siti Zaleha (2021) Sustainability-oriented application of value stream mapping: a review and classification. IEEE Access, 9. pp. 68414-68434.

Leong, Wah June and Enshaei, Sharareh and Kek, Sie Long (2021) Diagonal quasi-Newton methods via least change updating principle with weighted Frobenius norm. Numerical Algorithms, 86. pp. 1225-1241.

Lim, Chun Lan (2021) A study on the profile of solid waste and its reduction alternatives at Universiti Tun Hussein Onn Malaysia (UTHM), Pagoh Campus, Muar, Johor. Masters thesis, Universiti Tun Hussein Malaysia.

Lim Jun Jie, Nicholas and Mohamad Sukri, Khairul Amin (2021) Personal home network intrusion checking tool (PacAN). Penerbit UTHM, UTHM.

Loh, Eng Chuen (2021) Kelantan daily water level prediction model using hybrid deep-learning algorithm for flood forecasting. Masters thesis, Universiti Tun Hussein Malaysia.

Loh, Yin Xia (2021) Using collaborative model to examine online persuasion through e-commerce website design: Comparative study between Gen X and Gen Y online shoppers in Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Lohana, Sonia (2021) Financial sustainability and financial performance of the SMEs in service sector in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

M

M M Mohamad, M M Mohamad and A Ahmad, A Ahmad and M H Yee1,, M H Yee1, and T K Tee, T K Tee and A N Mohd Nasir, A N Mohd Nasir (2021) Implementation of self-directed learning in enhancing skills dedicated to the community college teaching staff. Journal of Physics: Conference Series. pp. 2-10.

M. F., Ahmad and S. S., Razali and N., Zakaria and N. N., Abd Mutalib and W. A. S, Wan Hassan and N., Bokhari (2021) Educational game platform kahoot! In teaching and learning process: a case study of new norms. In: 2021 IEEE 9th Conference on Systems, Process and Control (ICSPC 2021), 10–11 December 2021, Malacca.

M. Letchumanan, Shaktivell (2021) Simulation of lamination orientation for carbon fiber reinforced polymer as a wrapping structure on piping system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

M. N., Noorasyikin and M., Zainab (2021) A tensile strength of bermuda grass and vetiver grass in terms of root reinforcement ability toward soil slope stabilization. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 19-24.

M. Rus, A .Z. and M. Salim, N. S. (2021) Dynamic mechanical analysis of Dwimatrix Biopolymer from waste oil blended with thermoplastic; LDPE/HDPE. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

M. Z., Zakaria and M., Maryati (2021) Comparison of diversity and community structure of aquatic insects based on habitat class in Johor. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Maaruf, Siti Zuraida and Syawani, Nurul and Subramaniam, Tamil Selvan (2021) Interactive craft activities – elevating special needs education learning tools with “Craft Interactive Teaching Approach". Asian Journal of University Education (AJUE), 17 (3). pp. 243-254.

Maarup, Syahrul Nizam (2021) Investigation on different vertical aerated rock filter (vertical aerated rock filter) in removing phosphorus from domestic wastewater. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mahazir, Nur Sakinah and Othman, Siti Amira (2021) Production of paper from non-wood: a review. International Journal of Advanced Research in Engineering Innovation, 3 (1). pp. 103-110. ISSN Asian Scholars Networks

Mahli, Maximus Kohnizio (2021) Wear behavior and mechanical properties of al-based FGM. Masters thesis, Universiti Tun Hussein Malaysia.

Mahmood, Salwa and Hassan, Mohd Fahrul and Hemdi, Abdul Rahman and Kafuku, John Mbogo and Mat Saman, Muhamad Zameri (2021) Sustainability assessment for Small and Medium Enterprise (SMEs) by using fuzzy logic approach: a direction and further research. The International Journal of Integrated Engineering, 13 (2). pp. 10-15. ISSN 2229-838x

Mainasara, Muhammad Murtala and Abu Bakar, Mohd Fadzelly and Md. Akim, Abdah and C. Linatoc, Alona and Abu Bakar, Fazleen Izzany and Ranneh, Yazan K. H. (2021) Secondary metabolites, antioxidant, and antiproliferative activities of Dioscorea bulbifera Leaf Collected from Endau Rompin, Johor, Malaysia. Hindawi Evidence-Based Complementary and Alternative Medicine, 2021. pp. 1-10.

Malik, Rami Qays (2021) A roadside units positioning framework in the context of vehicle-to-infrastructure based on integrated AHP-entropy and group-VIKOR. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mamman, S. and Suah, F. B. M. and Raaov, M. and Mehamod, F. S. and Asman, S. and M. Zain, N. N. (2021) Removal of bisphenol A from aqueous media using a highly selective adsorbent of hybridization cyclodextrin with magnetic molecularly imprinted polymer. Royal Society Open Science. pp. 1-21.

Manab, Nurul Hanani (2021) Microwave ring resonator based on thermoplastic substrate for chicken breast meat quality identification application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mang, Jie Sheng (2021) Home buyers' purchase decision framework for Klang Valley, Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mangkau, Ivy Deirdre (2021) Safety and health practice among workers in municipal solid waste management in Sarawak. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Manshoor, Bukhari (2021) Buletin Fakulti Kejuruteraan Mekanikal dan Pembuatan Edisi 1/2021. [Bulletin]

Manshoor, Bukhari (2021) Buletin Fakulti Kejuruteraan Mekanikal dan Pembuatan Edisi 2/2021. [Bulletin]

Manshoor, Bukhari and Salleh, Hamidon and Khalid, Amir and Sayed Abdelaal, Muhammed Abdelfattah (2021) Method of lines and runge-kutta method in solving partial differential equation for heat equation. Journal of Complex Flow, 3 (1). pp. 21-25.

Marsi, Noraini and Main, Nor Mazlana and Leman, Abdul Mutalib and Mahmood, Salwa and Mat Hassan, Nik Normunira (2021) Recycling of Municipal Solid Waste (MSW) as a resource for bioproducts development. Penerbit UTHM, UTHM, pp. 28-36. ISBN 978-967-2817-10-9 (In Press)

Maruyama, Hisataka and Hashim, Hairulazwan and Yanagawa, Ryota and Arai, Fumihito (2021) Injection of a fluorescent microsensor into a specific cell by laser manipulation and heating with multiple wavelengths of light. In: 2020 IEEE International Conference on Robotics and Automation (ICRA), 31 May - 31 August, 2020, Paris, France.

Masduki, Masadliahani (2021) Model kemahiran komunikasi tempat kerja (KKTK) Pelajar Kejuruteraan Awam Politeknik Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Masduki, Masadliahani (2021) Model kemahiran komunikasi tempat kerja (KKTK) Pelajar Kejuruteraan Awam Politeknik Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mashuri, Muhammad Amirul Adli and Abd Rahman, Hamimah (2021) Fabrication of multilayers electrodes and electrolyte via screen printing for metal supported solid oxide fuel cell. Penerbit UTHM, UTHM.

Mastur, Mokhti and Hassim, Zainal Abidin and Abd Wahab, Shahdon and Yahya, Mohd Shahir and Ismail, Suhairi and Mohamad, Mahmod Abd Hakim and Basharie, Siti Mariam and Janon, Mohd Najib (2021) Modul sijil Eksekutif Pengurusan Teknologi Penanaman Tebu Profesional. Sijil Eksekutif Pengurusan Teknologi Penanaman Tebu Profesional, 1 . Penerbit UTHM, UTHM. ISBN 978-967-2975-09-0

Mat Ali, Nur Farhana and Rusiman, Mohd Saifullah and Abdullah, Abdul Wahab (2021) Time series analysis on Indian Mackerel Retail Price in Peninsular Malaysia. Enhanced Knowledge in Sciences and Technology, 1 (1). pp. 8-14.

Mat Hassan, Nik Normunira and Leman, A. M. and Mohamed Noor Zafarullah, Muhammad Alif and Salleh, Zuliazura and Rahman, K. A. and Madon, Rais Hanizam and Muzarpar, S. and Zamree, A. R. Shayfull (2021) Characterization of flow rate and Heat Loss in Heating, Ventilation and Air Conditioning (HVAC) Duct System for Office Building. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Mathelinea, Devy (2021) Cost optimisation of Malaysia medicine inventory through demand forecasting and nonlinear inventory model. Masters thesis, Universiti Tun Hussein Malaysia.

Mazlun, Muhamad Harith (2021) Antituberculosis, drug-fraction interaction and cytotoxicity activities of tetracera macrophylla stem extract. Masters thesis, Universiti Tun Hussein Malaysia.

Md Kamaruddin, Nafisah @ Kamariah (2021) The effect of contextual teaching on cognitive and non-cognitive learning construct among engineering students. Doctoral thesis, Universiti Tun Hussein Malaysia.

Md Kamaruddin, Nafisah @ Kamariah (2021) The effect of contextual teaching on cognitive and noncognitive learning construct among engineering students. Doctoral thesis, Universiti Tun Hussein Malaysia.

Md Sahak, Adibah Aishah and Abdul Rahman, Abdul Wafi and Raden Ismail, Mohd Raden Farhan Helmy and Rohiat, Mohd Akmal and Mohd Yazid, Nur Diyana (2021) Students’ acceptance towards kahoot application in mastering culinary terminology. Jurnal Pendidikan Teknologi dan Kejuruteraan, 27 (1). pp. 1-6. ISSN 0854-4735

Md Yunos, Jailani and Lai, Chee Sern and Hamdan, Nor Hidayah (2021) Criteria for sustainable curriculum of TVET teacher education programme in Malaysia. Journal of Technical Education and Training, 11 (3). pp. 49-54. ISSN 2229-8932

Mejah, Mohd Hafizuddin (2021) Hubungan tekanan kerja dan kecerdasan emosi dengan komitmen kerja dalam kalangan pegawai polis di batalion 6 PGA Muar Johor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Meng, Choung Chiong and Cheng, Tung Chong and Jo, Han Ng and Syed Mashruk, Syed Mashruk and Fong Chong, William Woei and Samiran, Nor Afzanizam and Guo, Ren Mong and Medina, Agustin Valera (2021) Advancements of combustion technologies in the ammonia-fuelled engines. Energy Conversion and Management, 244. pp. 1-17. ISSN 0196-8904

Michael, Karen Sharmini and Yee, Mei Heong and Tee, Tze Kiong and Kok, Boon Ching and Azid, Nurulwahida and Nur Rahma Putra2, Andika Bagus and Salim, Mohd Azli and Marniati Marniati, Marniati Marniati (2021) Integration of inventive problem solving in project based learning for building construction program through module development. In: AIP Conference Proceedings.

Moalim Rashid, Abdiqudus Abubakar (2021) A study of single planar resonator for dielectric characterization. Masters thesis, Universiti Tun Hussein Malaysia.

Moh Halmi, Mohamad Ariff (2021) Effect of high velocity oxy-fuel (HVOF) coatings on fatigue behaviour of carbon steel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohaffyza, Mimi and Md Yunos, Jailani and Yee, Mei Heong and Junita, Junita and Rizal, Fahmi and Ibrahim, Badaruddin (2021) Comparison of learning style for engineering and non-engineering students. Advances Iin IScience, ITechnology Iand IEngineering ISystems IJournal, 6 (4). pp. 184-188. ISSN 2415-6698

Mohamad, Ahmad Syukrie and Afif, Zehan Afizah and Abdul Hamid, Norhamreeza (2021) Sistem pengambilan tanah (perbicaraan) land acquisition system (trial). Penerbit UTHM, UTHM.

Mohamad, Arifha and Abd Rahman, Normy Rafida and Ghazali, Kamarull Bahar and Megat Zambri, Wan Anis Aqilah (2021) How private sector remains sustainable during pandemic COVID-19? a case study in Malaysia. Journal of Academia, 9 (2). pp. 166-172.

Mohamad, Nazwa Hidayah and Hashim, Hairulazwan and Abdul Hamid, Nor Aziati and Ismail, Mohd Ismarul Azhar (2021) Dashboard for analyzing SCADA data log: a case study of urban railway in Malaysia. International Journal of Advances in Applied Sciences (IJAAS), 10 (3). pp. 251-260. ISSN 2252-8814

Mohamad, Norsuhaidah and Masek, Alias (2021) Modes of facilitator skills for group learning among design and technology teachers in secondary schools. Indonesian Journal of Teaching in Science, 1 (1). pp. 17-20.

Mohamad, Nurul Haerani and Ibrahim, Badaruddin and Selamat, Asri and Ismail, Affero and Abdul Kadir, Zulida (2021) A protocol for development of holistic-entrepreneur graduates: emotional intelligence perspectives. Journal of Technical Education and Training, 13 (1). pp. 35-43. ISSN 2229-8932

Mohamad, Salasiah (2021) Diversity and Systematics Study of Tribe Alpinieae (Zingiberaceae) in Sarawak. Doctoral thesis, Universiti Malaysia Sarawak.

Mohamad Ali, Mohamad Fakrie (2021) Feasibility study on the technical and economic performance grid-connected PV system for designated rooftops in UTHM. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamad Aris, Nur Syazwani Aqilah and Che Him, Norziha and Rusiman, Mohd Saifullah and Shafi, Muhammad Ammar (2021) Analytic hierarchy process on criteria selection on the ideal partner among university students. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

Mohamad Arisa, Nur Syazwani Aqilah and Che Him, Norziha and Rusiman, Mohd Saifullah (2021) Analytic hierarchy process in purchasing import and local car models among first time car buyers in Malaysia. In: PROCEEDINGS OF SCIEMATHIC 2020, 1–2 December 2020, Pagoh, Malaysia.

Mohamad Jumain, Nur Hidayah (2021) Model relative adaptive control (MRAC) for temperature regulation of herb drying system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Kawi, Nur Farisha Husna and Ishak, Mohd Hafizal (2021) Pro-environmentalists behavioural assessment towards energy conservation among Malaysian university students. Research in Management of Technology and Business, 2 (2). pp. 1294-1304.

Mohamad Salih, Mohamad Adib (2021) Pembangunan kerangka model metodologi pendakwah dalam proses pengajaran agama kepada orang kelainan upaya (OKU) penglihatan di PERTIS. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamad Salleh, Mohamad Fahmi Izwan and Razali, Nizamuddin and Abdul Rahman, Khairul Anuar and Rahim, Mohd Bekri and Nur Yunus, n Faizal Amin (2021) Kesediaan pelajar tahun akhir Ijazah Sarjana Muda Pendidikan Vokasional (Penyejukbekuan dan Penyamanan Udara) dalam menceburi profesion perguruan. In: Prosiding seminar kebangsaan Majlis Dekan Pendidikan Universiti Awam, 13-14 September 2021, UKM.

Mohamad Taher, Mohammad Nasir and Bujang, Hazirah (2021) Cold mix asphalt- an alternative method to pavement rehabilitation. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 5-7.

Mohamad Taher, Mohammad Nasir and Bujang, Hazirah (2021) Super Fiber Mix (SFM) - forta fi reinforced asphalt pavement. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UiTM, UTHM, pp. 8-11.

Mohamed, Abdullahi Abdi (2021) Design, comparison and optimisation of permanent magnet flux switching motor (PMFSM) with various slot pole configuration. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed, Abubakar Hassan (2021) Cost analysis of solar home system for rural area of Mogadishu using homer software. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed, Mohamed Yusuf (2021) Simulation on off grid hybrid PV-battery system. Masters thesis, Universiti Tun Hussein Malaysia.

Mohamed Bilema, Munder Abdullah (2021) Reclaimed asphalt pavement with waste frying oil and crumb rubber. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Jofree, Ammar Fikree (2021) Faktor-faktor yang mempengaruhi ketidakcekapan teknik industri pembuatan elektrik dan elektronik di Malaysia. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohamed Yunus, Nur Hidayah and Paimin, Aini Nazura and Abdul Ghafar, Muhammad Hazim Fahmi (2021) Creative methods in qualitative interviews with higher education students: a graph sketching and photo-card activity. International Journal of Advanced Research in Education and Society, 3 (2). pp. 145-154.

Mohamed Zin, Nur Izzatul Huda (2021) Assessment of electric field on polymeric insulator in polluted environment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammad, Siti Fairus (2021) Samarium strontium cobalt oxide – samarium doped ceria carbonate (SSC-SDCC) as a new potential composite cathode material for low temperature solid oxide fuel cell. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Ali Basim (2021) Power quality improvement by using non-linear sliding mode controller with the dynamic voltage restorer. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed, Efaq Ali Noman (2021) Peatland fungi: identification, application in dye decolourization and bacterial inactivation in greywater. Doctoral thesis, Universiti Tun Hussein Malaysia.

Mohammed Ahmed Al-Fakih, Nawfan Mohammed (2021) Improvement of wind turbine lightning receptor. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Al-Alimi, Sami Abdo (2021) Modification and optimization of boron carbide and zirconia as reinforcement in hot equal channel angular processing solid state recycling AA6061 aluminium. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohammed Gismalla, Mohammed Salih (2021) A new optimization uniformity for indoor visible light communication systems using optical attocells configuration. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohamud Shire, Abdirahman (2021) The impact of job demands-resources and personal resources on employees’ job performance in telecommunication engineering sector. Doctoral thesis, Universiti Tun Hussein Malaysia.

Mohd Adzaharee, Muhammad Sallehuddin and Ahmad, Afandi and Mohd Nadzri, Muhammad Muzakkir (2021) IoT-Based Reverse Vending Machine (RVM) for recycle station. Penerbit UTHM, UTHM.

Mohd Alwi, Abg and M. A., A. and Abdullah, N. H. L. and Lai, C. S. (2021) Designing portable circular cutter tools using inventors for straight cutting iron at welding workshop. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Mohd Amdan, Nur Syahirah (2021) The effect of different concentration of composite coagulant on different arrangement of electrodes for hybrid composite coagulation and lector coagulation treatment of landfill leachate. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Amin, Mohamad Ariff (2021) The effect of different industrialized building system (IBS) construction methods compared to the conventional method on occupational safety and health (OSH) industry risks in construction. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Amran, Norshila and Razali, Nizamuddin and Soon Chong, Johnson Lim and Othman, Hasyamuddin and Rohanai, Reyanhealme (2021) Design and development of installer tool for file handle. In: Pembangunan Produk & Reka Bentuk. Penerbit UTHM, pp. 8-15. ISBN 978-967-2975-67-0

Mohd Anuar, Farrah Nuramanina and Othman, Norzila and Altowayti, Wahid Ali Hamood (2021) Assessments of concentrations of sulfur dioxide (SO2) In Universiti Tun Hussein Onn Malaysia (UTHM) Campus Area, Batu Pahat. In: 2021 International Congress of Advanced Technology and Engineering (ICOTEN), 4-5 July 2021, Yemen.

Mohd Apandi, Najeeha and Muhamad, Mimi Suliza and Radin Mohamed, Radin Maya Saphira and Mohamed Sunar, Norshuhaila and Al-Gheethi, Adel and Gani, Paran and A. Rahman, Fahmi (2021) Optimizing of microalgae scenedesmus sp. Biomass production in wet market wastewater using response surface methodology. Sustainability, 13 (2216). pp. 3-19.

Mohd Aris, Nor Afiqah (2021) Mathematical analysis of fractional-order chemostat model with time delay. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Asry, Anis Maisarah (2021) Bending mechanism for piezoelectric transducer footstep energy harvesting using piezoelectric tile. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Dzulkifli, Syarizul Amri (2021) A modified weighted support vector machine (WSVM) to reduce noise data in classification problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Dzulkifli, Syarizul Amri (2021) A modified weighted support vector machine (WSVM) to reduce noise data in classification problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Fahmi, Natasha Munirah and Zambri, Nor Aira and Salim, Norhafiz and Sim, Sy Yi (2021) Power forecasting from solar panels using artificial neural network in UTHM Parit Raja. Journal of Advanced Industrial Technology and Application, 2 (1). pp. 18-27.

Mohd Farid, Nur Sarah Hidayah and Ahmad, Nurazwa and Abu Seman, Noor Aslinda (2021) Hubungan di antara amalan pembuatan mampan dan prestasi mampan dalam sektor pembuatan. International Journal of Innovation and Industrial Revolution (ijirev). pp. 10-30.

Mohd Fodzi, Muhammad Haikal (2021) Municipal solid waste mixed polymer composites based diapers waste (MSWPC-DW) for partition panel. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Idris, Mohd Harris Fadhillah and Razali, Nizamuddin and Abdul Rahman, Khairul Anuar and Nur Yunus, Faizal Amin and Gerijih, Debie Devisser and Baharudin, Nurhayati (2021) Pembanggunan Modul Mekanik Bendalir: Bagi Meningkatkan Pemahaman Pelajar FPTV. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 88-98. ISBN 978-967-2817-45-1

Mohd Idris, Mohd Harris Fadhillah and Razali, Nizamuddin and Abdul Rahman, Khairul Anuar and Nur Yunus, Faizal Amin and Gerijih, Debie Devisser and Baharudin, Nurhayati (2021) Pembanggunan Modul Mekanik Bendalir: bagi meningkatkan pemahaman pelajar FPTV. In: Pembangunan produk penyejukbekuan dan penyaman udara. Penerbit UTHM, UTHM, pp. 88-98. ISBN 978-967-2817-45-1

Mohd Jan, Muhd Ikmal and Mohd Fauzi, Noor Akhmazillah (2021) A comparative study on thermal and non-thermal processing of kelulut honey. Journal Of Advanced Industrial Technology And Application, 2 (1). pp. 71-78. ISSN 2716-7097

Mohd Kamil, Nor Amani Filzah and Roslee, Noor Faiza and Abdo Al-Khadher, Sadeq Abdullah (2021) Environment acceptability as building material from organic contaminants leaching behavior in sludge. In: Sustainable Waste Utilization in Bricks, Concrete, and Cementitious Materials. Springer, pp. 251-262. ISBN 2366-2557

Mohd Nasim, Nur A’in (2021) Effect of salt stress on the physiological responses, phytochemicals and antioxidant activities of clitoria ternatea var. Pleniflora. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Noh, Ahmad Nahri (2021) Community capacity building towards a sustainable community based ecotourism development: a case study on Orang Asli Hulu (Jakun) In Kampung Selai, Bekok, Johor, Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Nor, Farhah Husna and Abdullah, Shakila and Yuniarto, Adhi and Ibrahim, Zaharah and Md Nor, Muhamad Hanif and Tony Hadibarata, Tony Hadibarata (2021) Production of lipopeptide biosurfactant by Kurthia gibsonii KH2 and their synergistic action in biodecolourisation of textile wastewater. Environmental Technology & Innovation, 22. pp. 2-10. ISSN 2352-1864

Mohd Nusa, Fatin Najwa and Ishak, Siti Zaharah and Abdull Rahman, Siti Hamidah and Awang, Zulkifli and Mohamad, Mimi Mohaffyza (2021) Factors affecting motorcyclist accident: psychological, environmental and vehicle factors. In: 3rd MITRANS INTERNATIONAL LOGISTICS AND TRANSPORT CONFERENCE (MILTC2021), 1 - 2 December 2021, online view.

Mohd Rusli, Muhammad Hafiz Daniel and Hashim, Hairulazwan (2021) Fertilization of food waste management in UTHM’s cafeteria using arduino. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Mohd Sadiq, Ummalaisha Farhana (2021) Dynamical analysis of chemostat models incorporating variable yield coefficient and substrate inhibition with recycling process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Saim, Nur Amylia Izrin (2021) Risk of construction corruption factors in construction project life cycle from contractors’ perspectives. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Salleh, Anuar (2021) Application of UAV in shoreline detection. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 45-48.

Mohd Salleh, Siti Nor Aishah (2021) New composite coagulant from agro-waste (tapioca peel) and polyaluminium chloride for primary landfill leachate treatment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Salleh, Zuliazura and Osman, Kahar and Marian, Mohd Fairuz and Mat Hassan, Nik Normunira and Madon, Rais Hanizam and Samiran, Nor Afzanizam and Rashid, Razlin Abd and lshak, lzuan Amin and Darlis, Nofrizalidris (2021) Rapid Prototyping 30 Model for PIV: Application in Human Trachea Model Flow Analysis. Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 79 (2). pp. 65-73. ISSN 2289-7879

Mohd Shaha, Mohd Nashruddin and Ahmad, Faridahanim and Abdullah, Mohd Sufyan and Musa, Mohd Kamaruzaman and Abidin, Nur Izieadiana and Harun, Hasnida and Abdul Hamid, Nor Hazren and Awang, Mariah and Abdul Rahman, Muhammad Ashraf and Hamidon, Nuramidah and Mohamed Yusop, Fatimah and Mustafaa, Mohd Syafiq Syazwan and Kamil, Nur Atikah and Tsu, Yian Lee (2021) Design and development of trash trap of stream for mini hydro. In: https://doi.org/10.1016/j.matpr.2021.05.435.

Mohd Sofberi, Nurul Atiqah (2021) Decision-making process framework at the planning phase of housing development project. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Sufian, Amirul Azan and Othman, Siti Amira (2021) Preparation and characterization of irradiated magnetic pineapple leaves for paper production. In: AIP Conference Proceedings, 5 Mei 2021. (In Press)

Mohd Wahidi, Nur Nadia Natasha and Masek, Alias (2021) Automatic environmental control system of grey oyster mushrooms house. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 70-78. ISBN 978-967-2817-45-1

Mohd Yassin, Nurain Izzati (2021) The performance of lightweight concrete brick containing expanded polystyrene and palm oil fuel ash. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Yunus, Khairul Nizam and Mohd Kamaruddin, Nurul Hidayah (2021) Penilaian nano zink oksida keatas campuran asfalt terhadap kerosakan kelembapan. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 12-14.

Mohd Yusof, Yusrina and Othman, Siti Amira (2021) Preparation and characterization of cogon grass natural fiber as a concrete filler for gamma radiation shielding. Malaysian Journal of Analytical Sciences, 25 (3). pp. 446-465.

Mohd Yusof, Yusrina and Othman, Siti Amira (2021) Preparation and characterization of cogon grass natural fiber as a concrete filler for gamma radiation shielding. Malaysian Journal of Analytical Sciences, 25 (3). pp. 446-465.

Mohd Zainuri, Mohamad Izwan Saifudin (2021) Study on kenaf powder reinforced cement materials for concrete 3d printing process. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohd Zubir, Muhammad Zulfadly (2021) Pembangunan elemen kemahiran hijau dalam pengajaran dan pembelajaran (PdP) bagi pensyarah kolej vokasional. Masters thesis, Universiti Tun Hussein Malaysia.

Mohd Zubir, Muhammad Zulfadly and Chee, Sern Lai and Zaime, Adib Farhan and Ming, Foong Lee and Ibrahim, Badaruddin and Ismail, Affero (2021) Dimension of green skills: perspectives from the Industry experts. Journal of Technical Education and Training, 13 (1). pp. 159-166. ISSN 2229-8932

Mohd Zubir, Muhammad Zulfadly and Chee, Sern Lai and Zaime, Adib Farhan and Ming, Foong Lee and Ibrahim, Badaruddin and Ismail, Affero (2021) Dimension of green skills: perspectives from the industry experts. Journal of Technical Education and Training, 13 (1). pp. 159-166. ISSN 2229-8932

Mohsen Al-Katheri, Hussein Hasan (2021) Development of machine learning-based algorithm to determine the condition in transformer oil. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mohsin Alwan, Rafea (2021) Oppressed female protagonists and their survival strategies: An ecofeminist perspective in Toni Morrison’s The Bluest Eye and Alice Walker’s The Color Purple. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Mokan, Kogila Vani (2021) Identification and evaluation of the critical success factors for solar energy project in Malaysia using analytic hierarchy process (AHP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Moorthy, Jaysrini Mahalinga and Sinnathamudhu, Jasshween Godha and Yusuf, Nurul Iman and Mohd Azizi, Muhammad Taufiq Imran and Azmi Nor, Muhammad Danial and Nathan, Shelena Soosay (2021) Mobile computing challenges. In: ICT for Technology Humanization. Penerbit UTHM, UTHM, pp. 10-22. ISBN 978-967-2389-28-6

Mosbiran, Nor Fauziyana and Mustafa, Mohamad Zaid and Ahad, Rosnee and Nordin, Mohd Norazmi (2021) Teachers competency elements of special education integrated program for national type schools in Johor, Malaysia on Implementation of Individual Education Plan. Research Article, 13 (2). pp. 1063-1068. ISSN 0975-2366

Mosbiran, Nor Fauziyana and Mustafa, Mohamad Zaid and Ahad, Rosnee and Nordin, Mohd Norazmi (2021) Teachers competency elements of special education integrated program for national type schools in Johor, Malaysia on implementation of individual education plan. International Journal of Pharmaceutical Research.

Mosbiran, Nor Fauziyana and Mustafa, Mohamad Zaid and Nordin, Mohd Norazmi (2021) Special elements and values needed in leadership for special education. REVIEW OF INTERNATIONAL GEOGRAPHICAL EDUCATION, 11 (4). pp. 712-722. ISSN 2146-0353

Moses, Lusia Barek and Abu Bakar, Mohd Fadzelly and Mamat, Hasmadi and Abdul Aziz, Zaleha (2021) Unfermented Freeze-Dried Leaf Extract of Tongkat Ali (Eurycoma longifolia Jack.) Induced Cytotoxicity and Apoptosis in MDA-MB-231 and MCF-7 Breast Cancer Cell Lines. Hindawi Evidence-Based Complementary and Alternative Medicine, 2021. pp. 1-16.

Moussa Kaya, Khalil Abakar (2021) Human capital, foreign aid and poverty reduction strategy in Chad. Doctoral thesis, Universiti Tun Hussein Malaysia.

Mubarak, Muhammad Faraz and Tiwari, Suman and Petraite, Monika and Mubarik, Mobashar and Raja Mohd Rasi, Raja Zuraidah (2021) How Industry 4.0 technologies and open innovation can improve green innovation performance? Management of Environmental Quality, 14 (1).

Mubarik, Mobashar and Raja Mohd Rasi, Raja Zuraidah and Mubarak, Muhammad Faraz and Ashraf, Rashid (2021) Impact of blockchain technology on green supply chain practices: evidence from emerging economy. Management of Environmental Quality, 14 (1).

Muda, Rizamarhaiza (2021) Fabrication SiO2 -NiO foam via replication technique for steam methane reforming catalyst at low temperatures. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhamad, Nik Noor Alaina Hisanie and Abu Bakar, Mohd Fadzelly and Lim, Sin Yee (2021) Promoting Malaysian Traditional Knowledge using digital ethnobotanical garden website. Journal of Sustainable Natural Resources, 2 (1). pp. 46-53.

Muhamad, Nik Noor Alaina Hisanie and Abu Bakar, Mohd Fadzelly and Lim, Sin Yee (2021) Promoting Malaysian traditional knowledge using digital ethnobotanical garden website. Journal of Sustainable Natural Resources, 2 (1). pp. 46-53.

Muhamad Damanhuri, Amir Abdullah (2021) PA12 nylon dust reduction of selective laser sintering reprocessing by optimization of refresh rate and powder handling. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhamil, Shariffah Eqlima and Hanapi, Zaliza and Subri, Ummu Sakinah and Mohamed, Suriani and Tze Kiong, Tee (2021) Innovation of easy learning basic pattern for beginners as teaching materials in field of sewing. International Journal of Academic Research in Progressive Education and Development, 10 (1). pp. 711-722.

Muhammad Imran, Mohd Ridzuan (2021) A comparison study of deep CNN models for brain tumor MRI image classification. Masters thesis, Universiti Tun Hussein Malaysia.

Muhammad Nda, Ramatu (2021) Extended unified theory of acceptance and use of technology: the influence of behavioral intention on big data management adoption by Malaysian public research universities. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhammed Asri, Noor Athirah (2021) Smart urban district: a case study in Sri Gading. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhammed Asri, Noor Athirah and Ibrahim, Rosziati (2021) Requirements analysis for transformation of urban district into smart city-a case study of Sri Gading. International Journal of Advanced Trends in Computer Science and Engineering. ISSN 2278-3091

Muhd Nor, Nik Hisyamudin (2021) To develop a new mineral carbonation process that have a high efficiency in CO2 absorption into industry slag using low energy mechanical milling. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhd Ramli Narayanan, Nurhayati (2021) The fabrication of TiO2 nanostructures on porous silicon for thermoelectric application. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Muhsin Al-Juhaishi, Lafta Flayih (2021) Effect of laminar and turbulent flow through a curved channel with a rectangle section by using baffles in cement industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Muhumed, Naima Mohamoud (2021) Design and analysis of two-phase DC/DC boost converter with PI controller. Masters thesis, Universiti Tun Hussein Malaysia.

Mukhtar, Muhammad Faiz Hakimi and Mahmod, M. F. (2021) Simulation analysis of ultrasonic testing in steel-based butt weld joint. Penerbit UTHM, UTHM.

Muniandy, Nagentrau (2021) Delamination-fretting wear failure evaluation at HAp-Ti-6Al-4V interface of artificial hip implant. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Musa, Yusuf (2021) Enhancing counterfeit tag detection for RFID system using slotted aloha. Masters thesis, Universiti Tun Hussein Malaysia.

Musaa, M. K. and A. Rahman, M. A. and H., Nurzalina and Lip, R. (2021) Pembinaan konstruk instrumen penilaian pasca penghunian untuk perumahan bertingkat yang dibina menggunakan kaedah Sistem Binaan Berindustri (IBS). Jurnal Teknologi, 83 (2). pp. 85-94.

Muse, Ibrahim Hersi (2021) Wireless power transfer characteristics observations using inductive coupling method. Masters thesis, Universiti Tun Hussein Malaysia.

Muslihati, Atqiya (2021) The optimization of graphene sensing layer against Escherichia coli. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Mustafa, Ali Abdulqader and Noranai, Zamri and Imran, Ahmed Abdulnabi (2021) Solar absorption cooling systems: a review. Journal of Thermal Engineering, 7 (4). pp. 970-983.

Mustaza, Muhammad Syafiq Anwar (2021) Data redundancy reduction using sensitivity analysis method for machine-learning-based battery management system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

N

N., Hamzah and M. F., Ahmad and N., Zakaria and A., Ariffin and S. N. K., Rubani (2021) Technical and vocational education students’ perception of using learning videos during Covid-19 pandemic period. In: IEEE International Conference on Automatic Control and Intelligent Systems (I2CACIS), 26-26 June 2021.

N. A., Isa and S. A., Bareduan and A. S., Zainudin and M., Marsudi (2021) Multiple bottlenecks sorting criterion at initial sequence in solving permutation flow shop scheduling problem. Journal of Advanced Manufacturing Technology (JAMT), 15 (1).

N. M., Salbi and N., Muhammad and N., Abdullah (2021) Optimizing flavonoid-rich Quranic Mixed Food (QMF) formulation with simplex-centroid mixture design. Food Research, 5 (2). pp. 80-87.

Nagarajan, D. and Broumi, S. and Smarandache, F. and Kavikumar, J. (2021) Analysis of neutrosophic multiple regression. Neutrosophic Sets and Systems, 43. pp. 44-53.

Nagarajan, D. and Broumi, S. and Smarandache, F. and Kavikumar, J. (2021) Analysis of neutrosophic multiple regression. Neutrosophic Sets and Systems, 43. pp. 44-53.

Najmuddin, Mohd Faudzir and Mohd Hauri, Nurhizatul Safikah and Haris, Hidayah and Zahari, Fatin and Othman, Nursyuhada and Hassem, Siti Hasmaliza and Abdul-Latiff, Muhammad Abu Bakar (2021) Agonistic behavior of captive saltwater crocodile, crocodylus porosus in Kota Tinggi, Johor. Journal of Sustainable Natural Resources, 2 (1). pp. 31-37.

Najmuddin, Mohd Faudzir and Mohd Hauri, Nurhizatul Safikah and Haris, Hidayah and Zahari, Fatin and Othman, Nursyuhada and Hassem, Siti Hasmaliza and Abdul-Latiff, Muhammad Abu Bakar (2021) Agonistic behavior of captive saltwater crocodile, crocodylus porosus in Kota Tinggi, Johor. Journal of Sustainable Natural Resources, 2 (1). pp. 31-37.

Nasir, Nasir and Abdullah, M. A. and L., N. H (2021) Designing bevel preparation tool using inventor for the preparation of angles in welding process. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Nasir, Nazlizan and Daud, Zawawi and Abdul Kadir, Aeslina (2021) Application of agro-waste adsorbent for the removal of cod in wastewater. In: Potential Technologies for Wastewater Treatment. Penerbit UTHM, UTHM, p. 7.

Nasir, Nur Afifah and Mohd Asrah, Norhaidah (2021) Survey on Kuala Lumpur to Singapore High-Speed Rail (KL-SG HSR) Project among Pagoh Residents. In: SCIEMATHIC 2020, November 4-5, 2020, Melaka, Malaysia.

Nasrullah, Alsad (2021) Experimental study of fracture energy for foamed concrete. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nasrullah, Alsad (2021) Experimental study of fracture energy for foamed concrete. Masters thesis, Universiti Tun Hussein Malaysia.

Nasser Nassar, Murad Yahya (2021) Lightning search algorithm for optimal economic and emission dispatch of photovoltaic integrated with thermal power system. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Chun Keat (2021) Development of iot-based agility timer prototype and classification of agility. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Lee Shan (2021) Development of sustainable 3R-based construction waste management framework for Penang. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Li Mun (2021) Development of assessment tool for dyslexia screening using fuzzy logic. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Ng, Si Jin and Yong, Tze Mi (2021) Evaluation of high density polyethylene plastic bag performance towards edge and point stresses using taguchi method. In: Progress in Engineering Application and Technology, 22 Jun 2021, UTHM.

Ngadiman, Norhayati and Hamid, Nor Baizura and Abdullah, Noorul Hudai and Sahat, Suhaila and Abdul Kadir, Muhammad Azraie (2021) DAC 12203 Environmental Engineering (Lecture Notes). Penerbit UTHM, UTHM.

Ngadiman, Norhayati and Hamid, Nor Baizura and Abdullah, Noorul Hudai and Sahat, Suhaila and Abdul Kadir, Muhammad Azraie (2021) Environmental Engineering (Laboratory). Penerbit UTHM, UTHM.

Nikman Lee, Mohammad Syabilee (2021) The development of energy risk framework for retrofitting project. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nor Azizi, Muhammad Iqmalhakim (2021) Pembangunan elemen kompetensi kemahiran hijau bagi pelajar teknologi pembinaan di Kolej Vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Azlan, Nurul Nasuha (2021) Analysis of bus service based on the passenger demand using PTV Vissim: main campus of Universiti Tun Hussein Onn Malaysia, Parit Raja. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Nor Hazhar, Nurul Jihan and Abduh Algheethi, Adel Ali Saeed and Abdul Kadir, Aeslina and Sarani, Noor Amira (2021) Textile dyes wastewater. In: Potential Technologies for Wastewater Treatment. Penerbit UTHM, UTHM, p. 15.

Nor Rashid, Fadilla' Atyka (2021) Development of spike train algorithms for physiotherapy assessment using deep learning approaches. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Nor Sany, Nor Saiful Amierrul and Mohd, Mohd Norzali (2021) Fatigue detection system with haar cascade classifier. Penerbit UTHM, UTHM.

Noranai, Zamri and Mohd Joharudin, Nurul Farahin and Redzwan, Muhammad Aliff Asyraf and Abdul Latif, Noradila and Hassan, Nur Zaha (2021) Improving energy efficiency at palm oil mill industries. In: 241st ECS Meeting, May 29- June 2 2022, Canada.

Nordin, Mohd Norazmi and Ibrahim, Nor Idayu and Borhanordin, Amirah Hazimah and Abd Halim, Wan Ismail and Mustafa, Mohamad Zaid (2021) Teacher education in Australia. Turkish Journal of Physiotherapy and Rehabilitation, 32 (3). pp. 4804-4809. ISSN 2651-4451

Nordin, Mohd Norazmi and Ibrahim, Nor Idayubinti and Borhanordin, AmirahHazimah and Abd Halim, Wan Ismail and Mustafa, Mohamad Zaid (2021) Teacher education in Australia. Turkish Journal of Physiotherapy and Rehabilitation, 32 (3). pp. 4804-4809. ISSN 2651-4451

Nordin, Mohd Norazmi and Mustafa, Mohamad Zaid and Ibrahim, Badaruddin and Abdul Razzaq, Abdul Rasid and Mosbiran, Nor Fauziyana (2021) Special education unique leadership style: the concept. LINGUISTICA ANTVERPIENSIA, 1. pp. 2244-2261. ISSN 0304-2294

Norfauzi, T. and Hadzley, A. B. and Azlan, U. A. A. and Azhar, A. A. and Noorazizi, S. (2021) Effect of pressure on density, porosity and flexural strength during cold isostatic press of alumina-ysz chromia cutting too. In: IRTTEC 2020, 30 September 2020, Kuala Lumpur, Malaysia (VIRTUAL CONFERENCE).

Norzeli, Adlan Nafiz and Rasyad, Za’iem Sabielar and Muhammad Razif, Muhammad Rusydi and Misman, Dalila and Mohd Nordin, Ili Najaa Aimi and Shabani, Hikma (2021) Automated rescuing boat tracking system using raspberry pi. Alinteri Journal Of Agriculture Science, 36 (1). pp. 466-474.

Nursal, Ridwan Saputra and Khalid, Amir and Abdullah, Iqbal Shahridzuan and Jaat, Norrizam and Darlis, Nofrizalidris and Koten, Hasan (2021) Autoignition behavior and emission of biodiesel from palm oil, waste cooking oil, tyre pyrolysis oil, algae and jatropha. Fuel, 306. ISSN 0016-2361

O

Obaid, Maytham Kadhim (2021) Causative factors of construction and demolition waste generation in Iraq Construction Industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Obayes, Noor Hatem (2021) New optimization feature for the developed open cnc controller based on ISO 6983 and ISO 14649. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ogiemwonyi, Osarodion (2021) Green consumer behaviour on green products among Generation Y in Malaysia and Nigeria : a cross-cultural comparative study. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ogiemwonyi, Osarodion and Harun, Amran (2021) Theory of planned behaviour approach to understand pro-environmental behaviour among young green consumers in Malaysia. Israel Journal of Ecology & Evolution. pp. 1-14.

Oi, Ka Jong and Nasharidan, Siti Adayu and Abdul Rashid, Azrin Hani and Main, Nor Mazlana and Yong, Tze Mi and Roslan, Mohd Nazrul and Masrol, Shaiful Rizal (2021) Factorial analysis of tensile properties of Areca Leaf Sheath (ALS) subjected to flattening. The International Journal of Integrated Engineering, 13 (2). pp. 82-89. ISSN 2229-838X

Omar, Mohd Shahir Shamsir (2021) Nurturing future leaders in research and innovation via knowledge sharing and exchange. In: Leading Higher Institution: Leadership Traits, Dreams and Achievement. UMK Entrepreneurship Institute (UMKEI), pp. 36-39.

Omar, Siti Sarah and Mohd Aris, Nurul Fadzilla (2021) Leading through the COVID-19 crisis. Penerbit UTHM, UTHM. ISBN 978-967-2817-52-9

Ong, Kok Meng (2021) A modified flower pollination algorithm and carnivorous plant algorithm for solving engineering optimization problem. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Ong, Kok Meng and Ong, Pauline and Sia, Chee Kiong (2021) A carnivorous plant algorithm for solving global optimization problems. Applied Soft Computing Journal, 98. pp. 1-40. ISSN 1568-4946

Ooi, Hui Ni and Ab Rahman, Nurul Hidayah (2021) A comparative study between deep learning algorithm and bayesian network on Advanced Persistent Threat (APT) attack detection. Penerbit UTHM, UTHM.

Ooi, Hui Ni and Ab Rahman, Nurul Hidayah (2021) A comparative study between deep learning algorithm and bayesian network on Advanced Persistent Threat (APT) attack detection. Penerbit UTHM, UTHM.

Oon, Fok Yew (2021) The causal effects of baldrige excellence framework and lean in the Malaysian electrical and electronics manufacturing industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Osman, Nor Naqiuddin and Razali, Nizamuddin and Gerijih, Debie Devissr and Baharudin, Nurhayati and Nur Yunus, Faizal Amin and Ali, Khairul Fahmi (2021) Thermal comfort in the productivity of students' learning at faculty of technical and vocational education. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Othman, Ahmad Akmal Hilmi and Puteh, Saifullizam and Buhari, Rosnawati (2021) Sistem pemantauan pengairan dan saliran sawah padi menggunakan teknologi komunikasi mudah alih. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 53-67. ISBN 978-967-2975-67-0

Othman, Bestoon Abdulmaged and Harun, Amran (2021) The effect of umrah service quality on umrah customer satisfaction and umrah customer loyalty: evidence from umrah traveling agents in Malaysia. Technium Social Sciences Journal, 22. pp. 492-546. ISSN 2668-7798

Othman, Bestoon Abdulmaged and Harun, Amran (2021) The influence of service marketing mix and umrah service quality on customer satisfaction and customer loyalty towards umrah travel agents in Malaysia. Technium Social Sciences Journal, 22. pp. 553-618. ISSN 2668-7798

Othman, Bestoon Abdulmaged and Harun, Amran and De Almeida, Nuno Marques and Sadq, Zana Majed (2021) The effects on customer satisfaction and customer loyalty by integrating marketing communication and after sale service into the traditional marketing mix model of Umrah travel services in Malaysia. Journal of Islamic Marketing, 1 (1). ISSN 1759-0833

Othman, Muhamad Haziq Fikri and Nur Yunus, Faizal Amin and Rahim, Mohd. Bekri and Rozali, Mohd. Zulfadzli and Kamis, Arasinah and Che Rus, Ridzwan (2021) Development of model egg incubation using split unit air conditioning system. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 1-7. ISBN 978-967-2975-67-0

Othman, N. and Haris, H. and Fatin, Z. and Najmuddin, M. F. and Sariyati, N. H. and Md-Zain, B. and Abdul-Latiff, M. A. (2021) A review on environmental DNA (eDNA) metabarcoding markers for wildlife monitoring research. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Othman, Siti Amira (2021) Effect of lead oxide on concrete density for radiation shielding purposes. In: iNuSTEC 2020, 17-19 Nov 2020, Selangor M'sia.

Oviawe, Jane Itohan and Azman, Mohamed Nor Azhari and Tee, Tze Kiong and Abilmazhinova, Oryngul S. (2021) Attribution styles as correlates of technical drawing task-persistence and technical college students’ performance. Cakrawala Pendidikan, 40 (2). pp. 544-553.

P

PTTA, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional Mei/2021. [Bulletin] (In Press)

PTTA, Wakaf dan Endowmen (2021) Buletin Pusat Wakaf & Endowmen Edisi 6/Mei 2021. [Bulletin] (In Press)

Pairan, Mohammad Fahmi and Shamsudin, Syariful Syafiq and Mohd Anwar, Mohd Shazlan (2021) Real-time system identification of an unmanned quadcopter system using fully tuned radial basis function neural networks. Int. J. Modelling, Identification and Control, 37 (2). pp. 128-139.

Pairan, Mohammad Fahmi and Shamsudin, Syariful Syafiq and Yaakub, Mohd Fauzi and Mohd Anwar, Mohd Shazlan (2021) Real-time system identification of an unmanned quadcopter system using fully tuned radial basis function neural networks. Int. J. Modelling, Identification and Control, 37 (2). pp. 128-139.

Parlaungan, Ade (2021) Dasar pentadbiran kerajaan terhadap pembangunan sosioekonomi masyarakat di Batam ke arah pembangunan kesejahteraan hidup. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Pillaya, Khuneswari Gopal and Ravieb, Tivya and Mohd Padzil, Siti Aisyah (2021) LASSO Regression in Consumer Price Index Malaysia. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

Putra, Andika Bagus Nur Rahma and Yee, Mei Heong and Meidyanti, Dewi Sabrina and Rahmawati, Anita Dwi (2021) Hi world: the virtual book learning integrated augmented reality to increase knowledge of Covid-19 prevention in the learning process post-pandemic era. International Journal of Interactive Mobile Technologies, 16 (6). pp. 176-187.

Q

Qaid Algobi, Mohammed Hamood (2021) Partial discharge measurement of void in insulation system using HDPE. Masters thesis, Universiti Tun Hussein Malaysia.

Qalib, Mohamed Ahmed (2021) Design UWB antenna for radar application. Masters thesis, Universiti Tun Hussein Malaysia.

R

Raduan, Rasyidah (2021) Pemetaan risiko gempa bumi di Sabah menggunakan sistem maklumat geografi. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raduan, Rasyidah (2021) Pemetaan risiko gempa bumi di sabah menggunakan sistem maklumat geografi. Masters thesis, Universiti Tun Hussein Malaysia.

Raffee, Ahmad Fauzi (2021) Multivariate time series analysis for short-term forecasting of ground level ozone (O3) in Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Rahim, Mohd Bekri and Mahad Musa, Muhammad Zaki and Nur Yunus, Faizal Amin and Abdul Rahman, Khairul Anuar and Baharudin, Nurhayati (2021) Kit pengajaran diagnostic air-conditioning training unit. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 88-98. ISBN 978-967-2975-67-0

Rahmat, Rafidah and Salim, Siti Aisyah (2021) A systematic review of digital services in government sector. REVIEW OF INTERNATIONAL GEOGRAPHICAL EDUCATION, 11 (9). pp. 1988-1998. ISSN 2146-0353

Raja Abd Assiss, Raja Fairol Farouk (2021) Pemetaan zon potensi tanah runtuh bagi jalan persekutuan dan jalan negeri di negeri Johor menggunakan kaedah jumlah ramalan bencana (TEHD). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Raja Mohd Rasi, Prof. Madya Ts. Dr. Raja Zuraidah (2021) Buletin UTHM Edisi 6 / 2021. [Bulletin]

Raja Mohd Rasi, Raja Zuraidah (2021) Buletin UTHM Edisi 5/2021. [Bulletin]

Rajah, Sathis and Nasir, Nurul Fitriah (2021) Effects of inlet velocity of a bubble column reactor on the fluid flow pattern for biodiesel production. Penerbit UTHM, UTHM.

Ranneh, Yazan and Md Akim, Abdah and Ab. Hamid, Hasiah and Khazaai, Huzwah and Fadel, Abdulmannan and Zakaria, Zainul Amiruddin and Albujja, Mohammed and Abu Bakar, Mohd Fadzelly (2021) Honey and its nutritional and antiinflammatory value. BMC Complementary Medicine and Therapies. pp. 1-17.

Rashid, Mohamad Amirul Qaiyum and Abduh Algheethi, Adel Ali Saeed and Abdul Kadir, Aeslina and Sarani, Noor Amira (2021) Restaurant wastewater treatment technologies and potential of biofringe fibre. In: Potential Technologies for Wastewater Treatment. Penerbit UTHM, UTHM, p. 39. ISBN 978-967-2975-56-4

Ratnasari, Sri Langgeng and Kirin, Arwansyah and Susanti, Ervin Nora and Lestari, Linayati and Tanjung, Rona and Sutjahjo, Gandhi (2021) Effect of work achievement, incentives, discipline and leadership style on employee performance. Journal of Social Transformation and Regional Development. pp. 166-173.

Razali, Muhammad Faiz and Narayanan, Sangitha and Md. Hazmi, Nurul Ashikin and Abdul Karim Shah, Nor Nadiah and Mustapa Kamal, Siti Mazlina and Mohd Fauzi, Noor Akhmazillah and Sulaiman, Alifdalino (2021) Minimal processing for goat milk preservation: Effect of high-pressure processing on its quality. Journal of Food Processing and Preservation. pp. 1-11.

Razali, N. A. and Othman, S. A . (2021) Potential dopant in photocatalysis process for wastewater treatment-a review. In: International Conference on Biodiversity 2020, 4 - 5 November 2020, Melaka, Malaysia.

Razali, N. A. and Othman, S. A . (2021) Potential dopant in photocatalysis process for wastewater treatment-a review. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Razali, N. S. M. and Ahmad, F. and Hamzah, N. and Wan Hassan, W. A. S. and Baharudin, S. M. (2021) Learning style tendencies based on fleming’s VARK learning style among TVET students. In: Proceedings of 8th International Conference on Advanced Materials Engineering & Technology (ICAMET 2020).

Razali, Nizamuddin and Muhamad Haris, Nurul Awatif and Rahim, Mohd Bekri and Yunus, Faizal Amin Nur and Abdul Rahman, Khairul Anuar and Ismail, Mohd Erfy (2021) Enhancing student’s motivation level using gamification methods in fluid mechanics subjects. In: Research and Innovation in Technical and Vocational Education and Training, UTHM. (Submitted)

Razali, Nizamudin and Kusairi, Nur Ku Fatin Syahirah and Nur Yunus, Faizal Amin and Abdul Rahman, Khairul Anuar and Wan Muda, Wan Hanim Nadrah (2021) Ducting and piping designmodules for vocational college students. In: Pembangunan produk penyejukbekuan dan penyaman udara. Penerbit UTHM, UTHM, pp. 168-182. ISBN 978-967-2817-29-1

Razali, Nizamudin and Mohd Shaffi, Nor Izuani and Rahim, Mohd Bekri and Nur Yunus, Faizal Amin and Abdul Rahman, Khairul Anuar and Baharudin, Nurhayati (2021) Pembangunan modul pembelajaran Advance CAD in HVAC. In: Pembangunan produk penyejukbekuan dan penyaman udara. Penerbit UTHM, UTHM, pp. 133-150. ISBN 978-967-2817-29-1

Razali, Nizamudin and Posius @ Wilfred, Branden and Nur Yunus, Faizal Amin and Abdul Rahman,, Khairul Anuar and Gerijih, Debie Devisser (2021) Simulasi kerosakkan pada sistem penyaman udara sebagai alat bahan bantu mengajar. In: Pembangunan produk penyejukbekuan dan penyaman udara. Penerbit UTHM, UTHM, pp. 151-167. ISBN 978-967-2817-29-1

Razali, Nur Amirah Ilyana and Bareduan, Salleh Ahmad (2021) Arena simulation training guide for simple call center. Penerbit UTHM, UTHM.

Razali, Siti Soleha (2021) Pembangunan elemen multimedia berasaskan content dan context seni dalam PdP untuk pendidikan latihan teknikal dan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Rini, I Gusti Ayu Intan Saputra and Hasim, Muhammad Asyraf (2021) CSR strategies of five-star hotels in Denpasar-Bali based on local community perceptions. Indonesian Journal of Sustainability Accounting and Management, 5 (1). pp. 57-70. ISSN 2597-6214

Rosli, Ahmad Asyraf and Muhammad Razif, Muhammad Rusydi and Abu Hassan, Omar and Mohd Shah, Nor Shahida and Mohd Nordin, Ili Najaa Aimi and Mustafa, Khairul Nizam (2021) Development of smart home system based on mobile apps control using IoT for educational purposes. Alinteri Journal. of Agriculture Science, 36 (1). pp. 525-533.

Rosli, Mohd Shafie and Saleh, Nor Shela and Alshammari, Sultan Hammad and Ibrahim, Mohd Mokhzani and Atan, Azri Syazwan and Atan, Noor Azean (2021) Improving questionnaire reliability using construct reliability for researches in educational technology. Improving Questionnaire Reliability using Construct Reliability for Researches, 15 (4). pp. 109-116.

Rosli, Siti Nurhaliza and Osman, Mohamad Hairi and Mahyeddin, Mohd Eizzuddin (2021) A simulation model of solid concrete beam containing Palm Oil Fuel Ash (POFA) and Expeneded Polystyrene (EPS) using finite element method. Progress in Engineering Application and Technology, 2 (1). pp. 216-224.

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Jamalludin, Mohd Riduan and Adam, Mohd Ridhwan and Ismail, Nor Hafiza and Jaafar, Juhana and Harun, Zawati and Ismail, Ahmad Fauzi (2021) Electrospinning parameters evaluation of PVDF-ZnO/Ag2CO3/Ag2O composite nanofiber affect on porosity by using response surface methodology. In: Regional Congress on Membrane Technology 2020 (RCOM 2020), Jan 24, 2021, UTM.

Rosman, Nurafiqah and Wan Salleh, Wan Norharyati and Mohd Razali, Nur Aqilah and Ahmad, Siti Zu Nurain and Ismail, Nor Hafiza and Aziz, Farhana and Harun, Zawati and Ismail, Ahmad Fauzi and Yusof, Norhaniza (2021) Ibuprofen removal through photocatalytic filtration using antifouling PVDF- ZnO/Ag2CO3/Ag2O nanocomposite membrane. Elsevier.

Rubani, Siti Nur Kamariah and Kamis, Mohd Nazri and Zakaria, Normah and Hamzah, Norhasyimah and Ariffin, Arihasnida (2021) Development of press machine for metal waste using BLYNK application remote control at general machine workshop. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

Rubani, Siti Nur Kamariah and Mansor, Ahmad Fadzli and Zakaria, Arihasnida Ariffin Normah and Hamzah, Norhasyimah (2021) Pembangunan sistem pengesan pada landasan mesin larik semasa operasi bebenang automatik. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 99-106. ISBN 978-967-2975-67-0

Rubani, Siti Nur Kamariah and Neko, Kenerthdick and Hamzah, Norhasyimah and Ariffin, Arihasnida and Zakaria, Normah (2021) Pembangunan pemegang bahan kerja berbentuk silinder untuk menghasilkan gear bagi mesin kisar jenis tegak. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 16-22. ISBN 978-967-2975-67-0

Rubani, Siti Nur Kamariah and Norbashahul, Dzulkarnain Hakim and Ariffin, Arihasnida and Zakaria, Normah and Hamzah, Norhasyimah (2021) Optional and non-optional teacher competencies from aspects of content knowledge in vocational college. In: Research and Innovation in Technical and Vocational Education and Training, UTHM.

S

S., Abbas and M. S., Latif and N. S., Shafie and M. I., Ghazali and N. A. Z.., Abidin and M. K.., Mustafa. and F., Kormin (2021) A review of antioxidant and anti-acetylcholinesterase activities of Centella asiatica (L.) Urb. for the treatment of Alzheimer’s disease. Food Research, 5 (2). pp. 1-17.

S., Abbas and M.S., Latif and N.S., Shafie and M.I., Ghazali and N.A.Z., Abidin and M.K., Mustafa and F., Kormin (2021) A review of antioxidant and anti-acetylcholinesterase activities of Centella asiatica (L.) Urb. for the treatment of Alzheimer’s disease. Food Research, 5 (2). pp. 1-17.

S., Herlambang and Wahyudiyono, Wahyudiyono and A., Subiyantoro and Jumintono, Jumintono and L., Madu and R., Hartati (2021) Role of smartphone devices in motivation to study in the Covid-19 Pandemic. Health Education and Health Promotion, 9 (3). pp. 257-261. ISSN 2345-2897

S. W. Su, Stephanie and Kek, Sie Long (2021) An improvement of stochastic gradient descent approach for mean-variance portfolio optimization problem. Journal of Mathematics. pp. 1-10.

S.M Johan, Siti Farhanah (2021) Accelerated consolidation of reconstituted dredged marine soils with drainage control. Doctoral thesis, Universiti Tun Hussein Malaysia.

Saad, Mohd Nazmi and Rahim, Mohd Bekri and Razali, Nizamuddin and Baharudin, Nurhayati and Ali, Khairul Fahmi (2021) Pembangunan tenaga solar menggunakan konsep hibrid bagi sistem penyaman udara unit pisah. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 99-110. ISBN 978-967-2817-45-1

Saaidin, Syazwi Hakimi (2021) The performance of concrete containing fine recycled concrete aggregate (FRCA) and fine crumb rubber (FCR) as partial fine aggregate replacement. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sabtu @ Othman, Hilyati (2021) A new service life prediction of reinforced concrete structures due to chloride-induced cover cracking with the confinement effect. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sabudin, Sulastri and Mohamad Noor, Mohamad Syafiq and Abdullah, Mohammad Kamil and Mohideen Batcha, Mohd Faizal and Taweekun, Juntakan (2021) Performance evaluation of a split unit air-conditioner retrofitted with Hydrocarbon Refrigerant (HC22). Journal of Advanced Research in Fluid Mechanics and Thermal Sciences, 81 (1). pp. 126-132. ISSN 2289-7879

Sadikan, Siti Fairuz Nurr (2021) A framework of integrated continuous online learner with fuzzy neural network application in learning environment. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sahari, Norain and Ngadiron, Zuraidah and Misman, Dalila and Mazri, Aida and Kassim, A.M. (2021) Analysis on single buyer market model and pool market model in deregulated electricity market. In: AIP Conference Proceedings.

Salad, Yusuf Hassan (2021) Sizing of hybrid photovoltaic and wind system for Block A residential hostel. Masters thesis, Universiti Tun Hussein Malaysia.

Salah Eddine, Benahmed (2021) Autonomous mobile robot with ORB-SLAM 2. Masters thesis, Universiti Tun Hussein Malaysia.

Salahudin, Shahrul Nizam and Ramli, Hani Suhaila and Abd Razak, Muhammad Helmy and Abdullah, Muhammad Safizal and Masum, Ahmad (2021) Determinants of career success: a case study of male teachers in secondary schools. Studies of Applied Economics, 39 (4). pp. 1-9. ISSN 1133-3197

Saleh, Nor Shela and Rosli, Mohd Shafie (2021) Systematic literature review: implications of mental illness on life and working integrity. Turkish Journal of Computer and Mathematics Education, 12 (2). pp. 677-685.

Saleh, Nor Shela and Rosli, Mohd Shafie (2021) Systematic literature review: implications of mental illness on life and working integrity. Turkish Journal of Computer and Mathematics Education, 12 (2). pp. 677-685.

Salem Al Neyadi, Ali Hamad (2021) Close circuit television camera applications in Abu Dhabi United Arab Emirates: surveillance system effectiveness assessment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Salh, Adeb and Audah, Lukman and Abdullah, Qazwan and Aydoğdu, Ömer and A. Alhartomi, Mohammed and Alsamhi, Saeed Hamood and A. Almalki, Faris and M. Shah, Nor Shahida (2021) Low computational complexity for optimizing energy efficiency in mm-wave hybrid precoding system for 5G. IEEE Access, 10. pp. 4714-4727. ISSN 2169-3536

Salh, Adeb and Audah, Lukman and Abdullah, Qazwan and Aydoğdu, Ömer and A. Alhartomi, Mohammed and Alsamhi, Saeed Hamood and A. Almalki, Faris and M. Shah, Nor Shahida (2021) Low computational complexity for optimizing energy efficiency in mm-wave hybrid precoding system for 5G. IEEE Access. pp. 4714-4727. ISSN 2169-3536

Salh, Adeeb and Audah, Lukman and Abdullah, Qazwan and M. Shah, Nor Shahida and A. Hamzah, Shipun and Nordin, Shahilah and Farah, Nabil (2021) Energy-Efficient Low-Complexity Algorithm in 5G Massive MIMO Systems. Computers,Materials & Continua, 67 (3). pp. 3190-3214.

Salihu, Rabiu and Abd Razak, Saiful Izwan and Ahmad Zawawi, Nurliyana and Abdul Kadir, Mohammed Rafiq and Ismail, Norjihada Izzah and Mat Nayan, Nadirul Hasraf and Jusoh, Norhana and Mohamad, Mohd Riduan (2021) Citric acid: a green cross-linker of biomaterials for biomedical application. European Polymer Journal, 146 (5).

Salihu, Rabiu and Abd Razak, Saiful Izwan and Ahmad Zawawi, Nurliyana and Shahir, Shafinaz and Sani, Mohd Helmi and Wsoo, Mohammed Ahmad and Mat Nayan, Nadirul Hasraf (2021) Catalyst-free crosslinking modification of nata-de- coco-based bacterial cellulose nanofibers using citric acid. Chitosan, Chitin, and Cellulose Nanofiber Biomaterials, 13 (17). pp. 1-21.

Salim, Siti Aisyah and Salim, Siti Hajar and Mohd Razali, Fadhlina (2021) Structured Literature Reviews (SLR) of urban farming for improving economic status of urban residents. International Journal of Sustainable Construction Engineering and Technology, 12 (5). pp. 271-273. ISSN 2180-3242

Salleh, Siti Hasliah and Mohamed Yusof, Nor Ashikin and Ismail, Fadillah (2021) Survey instrument for measuring level of preparedness amongst healthcare personnel in radiation emergency. Journal of Advanced Research in Social and Behavioural Sciences, 22 (1). pp. 11-20. ISSN 2462-1951

Samiran, N. A. and Mohamad Rus, M. A. and Mat Hassan, N. N. and Ishak, M. Z. and Ishak, I. A. (2021) Study of tensile properties for aluminum 6061 reinforced with AISI 1060 steel machining chips. The International Journal of Integrated Engineering, 13 (2). pp. 241-246. ISSN 2229-838X

Samsudin, Muhammad Zahid and Didane, Djamal Hissein and Elshayeb, Said A. and Manshoor, Bukhari (2021) Assessment of solar energy potential in Johor, Malaysia. Journal of Design for Sustainable and Environment, 3 (1). pp. 1-6.

Samsudin, Shahifarhan and Rozali, Mohd Zulfadli and Ibrahim, Badaruddin and Hamdan, Nor Hidayah (2021) Level of mental toughness on academic achievement of student-athletes Universiti Tun Hussein Onn Malaysia (UHTM). Journal of Contemporary Issues in Business and Government, 27 (2). pp. 5581-5590. ISSN 2204-1990

Samsudin, Shahifarhan and Rozali, Mohd Zulfadli and Ibrahim, Badaruddin and Hamdan, Nor Hidayah (2021) Level of mental toughness on academic achievement of student-athletes Universiti Tun Hussein Onn Malaysia (UTHM). Journal of Contemporary Issues in Business and Government, 27 (2). pp. 5581-5590. ISSN 2204-1990

Sam’an, Muhammad and Dasrila, Yosza and Muslim, Much Aziz (2021) The new fuzzy analytical hierarchy process with interval type-2 trapezoidal fuzzy sets and its application. Fuzzy Information and Engineering, 13 (3). pp. 391-419.

Sapit, Azwan and Shather, Saad Kariem and Abed, Farook Nehad (2021) Parameters analysis in wire electrical discharge machine process of titanium alloys with dielectric alumina. Selection and peer-review under responsibility of the scientific committee of the 3rd International Con�ference on Materials Engineering & Science., 42. pp. 1845-1859.

Sarif, Nira Mawangi (2021) A discrete-time fast terminal sliding mode for depth control of autonomous underwater vehicle. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Sazali, Norsuhailizah and Harun, Zawati and Azhar, Faiz Hafeez and Bahri, Syamsutajri Syamsol and Raja Ahmad, Raja Puteri Nurul Adibah and Hussin@Isa, Rosniza and Misdan, Nurasyikin (2021) The effect of various molarity sodium hydroxide (NaOH) on the hydrosodalite formation from synthesis of Johor Kaolin, Malaysia by hydrothermal method. Materials Today: Proceedings, 46. pp. 2045-2051.

Seah, Shi Jie (2021) Rain attenuation characterization for 5G network in Peninsular Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

See, Lee Yee and Ismail, Fadillah (2021) To build trust with employee and gain their loyalty as the key to success. Jurnal Penyelidikan Sains Sosial (JOSSR), 4 (10). pp. 1-7.

Selamat, Asri and Zaidi, Mohd Taufik Syazeli and Muhamad Hanafi, Nurfirdawati and Jumintono, Jumintono (2021) Teaching and learning assessment: an empirical study at Advanced Technology Training Center (ADTEC) Malaysia. Educational Administration: Theory and Practice, 27 (4). pp. 1180-1189.

Selamat, Siti Norhana (2021) Pembangunan elemen multimedia berasaskan content dan context seni untuk pendidikan latihan teknikal dan vokasional. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Senin, M. S. and Nordin, Mohd Norazmi and Abd Mutalib, Norathirah Nabila and Abd Rashid, Intan Maizura and Mustafa, Mohamad Zaid and Abdul Razzaq, Abdul Rasid and Ibrahim, Badarudin (2021) Teaching similarities and differences between non directive teaching and enhancing self esteem of special education students. LINGUISTICA ANTVERPIENSIA (2). pp. 2697-2707.

Senin, M.S. and Nordin, Mohd Norazmi and Abd Mutalib, Norathirah Nabila and Abd Rashid, Intan Maizura and Mustafa, Mohamad Zaid and Abdul Razzaq, Abdul Rasid and Ibrahim, Badarudin (2021) Teaching similarities and differences between non directive teaching and enhancing self esteem of special education students. LINGUISTICA ANTVERPIENSIA, 2. pp. 2697-2707.

Senin, Muhammad Adam and Halim, Harliana (2021) The administrator, teachers and parents involvement in preschool during Movement Control Order. Southeast Asia Early Childhood Journal (SAECJ), 10. pp. 10-24. ISSN 2289-3156

Senin, Muhammad Adam and Halim, Harliana and Ali, Al-AmirulEimerRamdzan (2021) Online writing task for young learners during mco: pupils and parents responses. Annals of R.S.C.B.,, 25 (3). pp. 4627-4640. ISSN 1583-6258

Seron, Nor Fasihah Ngah and Hanapi, Nor Amalina and Wan Ismail, W. H. (2021) Urban connectivity in Johor Bahru City Center: a review study. In: Architecture and Technology in Malaysia. Penerbit UTHM, UTHM, pp. 41-53. ISBN 978-967-2817-14-7 (Submitted)

Setiawan, Roy and Cavaliere, Luigi Pio Leonardo and Chowdhury, Arup Roy and Koti, Kartikey and Mittal, Praveen and Subramaniam, Tamil Selvan and Rajest, S. Suman and Regin, R. and Singh, Sonia (2021) The impact of motivation on employees productivity in the retail sector: the mediating effect of compensation benefits. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (6). pp. 8159-8190.

Setiawan, Roy and Kumar, V. Ramesh and Chakravarthi, M. Kalyan and Villalba-Condori, Klinge Orlando and Vera-Vasquez, Cesar Gonzalo and Subramaniam, Tamil Selvan and Koti, Kartikey and Rajest, S. Suman and Rajan, Regin (2021) The empirical results of conditional analysis of principals' reasons in bullying teachers. Turkish Online Journal of Qualitative Inquiry (TOJQI), 12 (3). pp. 2737-2756.

Setik, Roziyani and Raja Lope Ahmad, Raja Mohd Tariqi and Marjudi, Suziyanti (2021) Exploring classification for sentiment analysis from halal based tweets. ResearchGate.

Shafie, Ahmad Shafarin and Rubani, Siti Nur Kamariah and Paimin, Aini Nazura (2021) Safety management practices in the Malaysia Technical And Vocational Education Training (TVET). European Journal of Molecular & Clinical Medicine, 8 (2). pp. 1463-1470. ISSN 2515-8260

Shahedan, Noor Fifinatasha and Abdullah, Mohd Mustafa Al Bakri and Mahmed, Norsuria and Kusbiantoro, Andri (2021) The influence of density, compressive strength and thermal conductivity under variety percentage of glass bubble in geopolymer concrete. In: AIP Conference Proceedings, 5 Mei 2021.

Shahedan, Noor Fifinatasha and Abdullah, Mohd Mustafa Al Bakri and Mahmed, Norsuria and Kusbiantoro, Andri and Tammas-Williams, Sam and Long, Yuan Li and Aziz, Ikmal Hakem and Vizureanu, Petrica and J. Wysłocki, Jerzy and Błoch, Katarzyna and Nabiałek, Marcin (2021) Properties of a new insulation material glass bubble in geopolymer concrete. Materials, 14 (809).

Shahlan, Nur Najwa and Salamat, Mohamad Aizi and Surat, Shahlan (2021) Perception towards online learning implementations during Covid-19 pandemic: comparative study Malaysia and Indonesia students. Penerbit UTHM, UTHM.

Shahlee, Shakina (2021) Morphological processes of neologisms in social media. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahrubudin, Nurhalida (2021) Evaluation of critical success factors of 3D printing technology implementation using analytic hierarchy process (AHP). Masters thesis, Universiti Tun Hussein Onn Malaysia.

Shahzad, Asim (2021) An improved framework for content and link-based web spam detection: a combined approach. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shaifull Zaman, Sharmine Wani Zakirah and UNSPECIFIED (2021) Characterization and review of dual composite cathodes LSCF-SDC/YSZ-SDC for intermediate to low temperature solid oxide fuel cel. Penerbit UTHM, UTHM.

Shaikh, Haseeb Halim (2021) Construction claims in the fast track mega infrastructure projects of Saudi Arabian Construction Industry. Masters thesis, Universiti Tun Hussein Malaysia.

Sharan, S. and Sharma, B. K. and Jacob, Kavikumar (2021) Interval type-2 fuzzy automata and Interval type-2 fuzzy grammar. Journal of Applied Mathematics and Computing.

Sharan, S. and Sharma, B. K. and Kavikumar, Jacob (2021) Interval type-2 fuzzy automata and Interval type-2 fuzzy grammar. Journal of Applied Mathematics and Computing.

Sharif, Hafiz Zafar (2021) Optimal design of net zero energy residential buildings in tropical climate. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shariffudin, Fatin Nur Syaeera Nabila and Mohamad, Mimi Mohaffyza (2021) Construction waste management practices in the construction site: virtual source analysis. In: Research and Innovation in Technical and Vocational Education and Training, https://doi.org/10.30880/ritve 2021.01.01.026, UTHM.

Sharqawi, Mushtaq Abdulrazzaq (2021) Gender based variation in employing suggestion strategies by Iraqi EFL learners. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shather, Saad Kariem and Sapit, Azwan and Abed, Farook Nehad (2021) Performance of Ti-6242 production using nano powder mixed with different dielectrics. Second International Conference on Aspects of Materials Science and Engineering (ICAMSE 2021), 45. pp. 4490-4497.

Shuaib, Nasir (2021) Relationship of zooplankton and environmental parameter with emphasis on copepods at Pulau Tinggi, Johor, Malaysia. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Shukur, Muhammad Mahathir and Hilmi Syed Mohamad, Syed Burhanuddin Hilmi (2021) Comparative study on the effectiveness of building maintenance scheduling between two multipurpose hall buildings. In: Recent Trends in Civil Engineering and Built Environment, UTHM.

Sidek, Noor Azizah (2021) A guided artificial bee colony (GABC) heuristic for permutation flowshop scheduling problem (PFSP). Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Sidik, Hazwani and Masek, Alias (2021) The effects of problem-based learning in students reading comprehension for mastering the content and vocabulary acquisition. ASEAN Journal of Science and Engineering Education, 1 (2). pp. 87-92. ISSN 2775-6793

Soh, Yee Fang and Rashid, Umi Kartini and Lee, Te Chuan (2021) Acceptance level of drone delivery among Malaysian Consumers. In: AIP CONFERENCE PROCEEDINGS.

Soomro, Hassan Ali (2021) New structure of dual stator hybrid excitation flux switching motor for aircraft applications. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Soomro, Irfan Ali (2021) Advancement of a modular rotor permanent magnet flux switching machine for high torque performance. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Soon, Adrian Bee Tiong (2021) Characterisation of variable focus liquid lens camera system for depth estimation of a moving object. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Subramaniam, Tamil Selvan and Ibrahim, Nur Shahrizah (2021) Rekabentuk shelter security system dan analisis kejuruteraan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 68-77. ISBN 978-967-2975-67-0

Suhaini, Nurul Ashikin (2021) Investigation on construction waste management at precast concrete plants in Johor: case study. Masters thesis, Universiti Tun Hussein Malaysia.

Suhandri, Hendy Fitrian and Adil, Irdam and A. Khalifa, Nasradeen and Saptari, Asep Yusup (2021) Time scales and their characteristics. In: ROAD PAVEMENT & GEOMATIC APPLICATION: The Scenario. Penerbit UTHM, UTHM, pp. 49-62.

Sukarno, Siti Nurzulaika and Saringat, Mohd Zainuri and Mustapha, Aida and Razali, Nazim (2021) Comparative study of football team rating system using elo rating and pi-rating for Switzerland Super League. Penerbit UTHM, UTHM.

Sukki, Firdaus Muhammad and Farooq, Haroon and Abu-Bakar, Siti Hawa and Ardila-Rey, Jorge Alfredo and Sellami, Nazmi and Kilpatrick, Ciaran and Muhtazaruddin, Mohd Nabil and Bani, Nurul Aini and Zulkipli, Muhammad (2021) Mathematical modelling of a static concentrating photovoltaic: simulation and experimental validation. Applied science. pp. 1-19.

Suksuwan, Wasu and Mohideen Batcha, Mohd Faizal and Palamanit, Arkom and Wae-hayee, Makatar (2021) The effect of Biomass Shapes on combustion characteristic in updraft chamber. International Journal of Integrated Engineering (IJIE), 13 (4). pp. 163-171. ISSN 2229-838X

Sulaiman, Amelia and Salamat, Mohamad Aizi (2021) Sistem e-PnP Fakulti Teknologi Kejuruteraan (FTK), UTHM. Penerbit UTHM, UTHM.

Sulaiman, M. A and Mohd Razali, I. N and Zainol, N. N. and Alias, M. N. and Wan Yusoff, W. Z. (2021) Current review towards the new best practices of Corporate Real Estate Management (CREM) in Malaysia. Jurnal Intelek, 16 (1). pp. 200-206. ISSN 2231-7716

Sulistyo, Budi and Amani, Husni and Widaningrum, Sri and Mohammad, Musli and Ibrahim, Rasidi (2021) Comparative study of business excellence frameworks and awards in Southeast Asian Countries. International Journal of Business and Society, 22 (3). pp. 1123-1142.

Sumarwati, Sri and Amiruddin, Mohd Hasril and Madar, Ahmad Rizal (2021) The element of research skills for the implementation of research by postgraduate students in Malaysia. International Journal of Innovation, Creativity and Change, 15 (2).

Sundararajan, Komala Devi (2021) Safe crossing among pedestrians based on extended theory of planned behaviour. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Suratkon, Azeanita and Azlan, Atiqah Syahmina (2021) Working from Home (WFH): challenges and practicality for construction professional personnel. International Journal of Sustainable Construction Engineering and Technology, 12 (4). pp. 11-19. ISSN 2180-3242

Syarifah, Sharfina Mutia and Mohd Kassim, Angzzas Sari and Mohd Aripin, Ashuvila and Chee, Ming Chan and Zainulabidin, Muhd Hafeez and Ishak, Nadiah and Siswanto, Waluyo Adi (2021) Brief Dataset on produced handsheet from oil palm residue lignocellulose treated with Bacillus cereus on mechanical and physical characterization. Data in Brief, 36. pp. 1-12.

Syed Abu Bakar, Syarifah Mastura and Tara Singh, Harpajan Singh and Salahudin, Shahrul Nizam and Al Qershi, Nagwan and Saad, Abidah and Sandhu, Sukjeet (2021) Role clarity, autonomy, work engagement and voluntary turnover intentions: the moderating role of personal circumstances. International Journal of Entrepreneurship and Business Development, 25 (4). pp. 1-17. ISSN 1099-9264

T

Tahan, Muliana (2021) Aluminium nitride (AlN) as buffer layer for deposition of gallium nitride (GaN) thin films on silicon substrates using magnetron sputtering technique. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Taher Al Mansoori, Fatima (2021) Structural relationship model of factors affecting the organizational performance of UAE oil & gas industry. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tai, Sing Yong and Ab.Aziz, Puan Ruhaya (2021) Development of my toy house online ordering system for my toy house online store. Penerbit UTHM, UTHM.

Tajuddin, Muhammad Farhan and Algheethi -, Adel Ali Saeed Abduh and Radin Mohamed, Radin Maya Saphira and Abdul Kadir, Aeslina (2021) Using chitosan beads for removing heavy metals from car wash services. In: Potential Technologies for Wastewater Treatment. Penerbit UTHM, UTHM, p. 22.

Tajurahim, Nurul Ainina Nadhirah and Mahmood, Salwa and Marsi, Noraini and Raja Mamat, Tengku Nur Azila (2021) Improvement of facilities layout planning related with safety: a case study at quarry. In: Multidisciplinary Engineering Science and Advanced Technology. Penerbit UTHM, UTHM.

Talib, N. and M. Nasir, R. and A. Rahim, E. and Lee, W. K. and Abdullah, H. and Saleh, A. (2021) Tribological evaluation of solid lubricant enriched in modified Jatropha-Based Oil as Minimum Quantity Lubrication (MQL) oil for composite material. In: Tribological Applications of Composite Materials. Springer, pp. 331-345. ISBN 978-981-15-9634-6

Talib, N. and S. Rao, N. R. and Jamaluddin, N. A. and Abdullah, H. and Saleh, A. and Lee, W. K. and Ahmad, S. (2021) The performance of modified jatropha-based nanofluid during turning process. In: Proceedings of Green Design and Manufacture 2020, 23–24 July 2020, Arau, Malaysia.

Talib, Salleh (2021) A corpus-based lexical and grammatical error identification: L2 learners academic writing. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Talib Salman, Hawraa (2021) A pragmatic study of strategic maneuvering in Jane Austen’s Novels: Pride and Prejudice and Emma. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kian Meng (2021) Identification of polystyrene degrading bacteria and potential enzyme action from zophobas morio for improvement and sustainable biodegradation of waste. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kian Meng (2021) Identification of polystyrene degrading bacteria and potential enzyme action from zophobas morio for improvement and sustainable biodegradation of waste. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Tan, Kian Meng and Mohd Fauzi, Noor Akhmazillah and Mohd Kassim, Angzzas Sari and A. Razak, Aliff Hisyam and Kamarudin, Kamarul Rahim (2021) Isolation and identification of polystyrene degrading bacteria from zophobas morio’s gut. Walaikak Journal of Science & Technology, 18 (8).

Tan, King Hiyang and Abd Rani, Nurnasiha Annisa and Zakariah, Siti Hajar (2021) Perception students on teaching and learning using Google Classroom among FPTV student. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 94-108. ISBN 978-967-2975-96-0

Tan, Lorinna Mei Hua (2021) Development of variable voltage variable frequency drive system for induction motor speed control. Masters thesis, Universiti Tun Hussein Malaysia.

Tang, Jie Yi and Ab Rahman, Nurul Hidayah (2021) Restaurant O SIX JOINT online ordering system with anti-SQL injection. Penerbit UTHM, UTHM.

Tarique, Muhammad (2021) Relationship between significant construction safety parameters and on site safety performance of high rise building in Karachi, Sindh Province, Pakistan. Masters thesis, Universiti Tun Hussein Malaysia.

Tee, Tze Kiong and Alias, Maizam and Ming Foong, Ming Foong and Mohamad, Mimi Mohaffyza and Sukardi, Sukardi (2021) Comparative studies: teaching activities in technical universities between engineering and non-engineering educators in Malaysia. Turkish Journal of Computer and Mathematics Education, 12 (9). pp. 1104-1115.

Tee, Tze Kiong and Roslen, Khaireen Edlin and Nur Rahma Putra2, Andika Bagus and Risfendra, Risfendra and Yee, Mei Heong and Mohamad, Mimi Mohaffyza and Azid, Nurulwahida (2021) Pembangunan modul pengajaran berasaskan permainan digital bagi Kursus Teknologi Elektrik 1. Sains Insani, 6 (1). pp. 139-143.

Tezara, Cionita and Hadi, Agung Efriyo and Siregar, Januar Parlaungan and Muhamad, Zalinawati and Mohamad Hamdan, Mohammad Hazim and Oumer, Ahmed Nurye and Jaafar, Jamiluddin and Irawan, Agustinus Purna and Teuku Rihayat, Teuku Rihayat and Fitriyana, Deni Fajar (2021) The effect of hybridisation on mechanical properties and water absorption behaviour of woven jute/ramie reinforced epoxy composites. Polymers, 13. pp. 1-17. ISSN 2073-4360

Thabet Albatol, Mohammed Samer Hasan (2021) Securing cloud data system (SCDS) for key exposure using AES algorithm. Masters thesis, Universiti Tun Hussein Malaysia.

Thana Singam, Rupashinii (2021) Effect of superhydrophobic coating on the mechanical properties and colourfastness of lawsonia inermis, azadirachta indica and curcuma longa dyed cotton fabrics. Masters thesis, Universiti Tun Hussein Malaysia.

Thawaba, Abdulaziz Ahmed and Ramli, Azizul Azhar and Md. Fudzee, Mohd. Farhan (2021) PM-ISD traceability metrics enhance reliability assessment for safety-critical systems development processes: a case study of oil and gas well drilling project. IEEE.

Ting, Heng Sheng and Rusiman, Mohd Saifullah and Che Him, Norziha and Sufahani, Suliadi Firdaus and Nasibov, Efendi (2021) Analysis of time series for Malaysian currency exchange rate to the United States currency. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

Tuan Ismail, Tuan Noor Hasanah and Wijeyesekera, Devapriya Chitral and Bakar, Ismail (2021) Development and field testing of Geocomposite Cellular Mats (GCM) to minimize the ground movements of highway embankments founded on peat ground. Advancements in Geotechnical Engineering. pp. 1-23.

Tuan Ismail, Tuan Noor Hasanah and Wijeyesekera, Devapriya Chitral and Bakar, Ismail and Kasalan, As-Shar and Meng Siang, Alvin John Lim and Abdullah, Mohd Akmal (2021) Efficacy of Geo-Cellular Mat (GCM) to mitigate settlement via field performance. MCRJ Special Issue, 13 (2). pp. 20-31.

Tuan Ismail, Tuan Noor Hasanah and Yuriz, Yasmin and Hassan, Nurul Azida and Saji, Nurdalila and Wan Jusoh, Wan Amizah and A. Rahman, and Noor Khazanah (2021) Experimental study on strength performance of soil reinforced with coconut fibre for PANCHOR–MUAR road. MCRJ Special Issue, 13 (2). pp. 43-52.

Tukiran, Nor Anis Intan Aqiah and Ahmad Badri, Nur ‘Izzah (2021) Generic skills level of bachelor of vocational education students University Tun Hussein Malaysia. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 40-56. ISBN 978-967-2975-96-0

Tukiran, Nor Anis Intan Aqiah and Muhammad Diah, Nadiah (2021) The main factors affecting the selection of courses related to food services among male students in vocational colleges. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 1-20. ISBN 978-967-2975-96-0

U

UNIT PENGURUSAN STRATEGIK & KORPORAT (2021) BULETIN PUSAT SUKAN UNIVERSITI EDISI 1/2021. [Bulletin]

UNIT PENGURUSAN STRATEGIK DAN KORPORAT (2021) BULETIN PUSAT SUKAN UNIVERSITI EDISI 2/2021. [Bulletin]

UNIT PENGURUSAN STRATEGIK DAN KORPORAT (2021) BULETIN PUSAT SUKAN UNIVERSITI EDISI 3/2021. [Bulletin]

UNIT PENGURUSAN STRATEGIK DAN KORPORAT (2021) BULETIN PUSAT SUKAN UNIVERSITI EDISI 4/2021. [Bulletin]

UNIT PENGURUSAN STRATEGIK DAN KORPORAT (2021) BULETIN PUSAT SUKAN UNIVERSITI EDISI 5/2021. [Bulletin]

UNIT PENGURUSAN STRATEGIK DAN KORPORAT (2021) BULETIN PUSAT SUKAN UNIVERSITI EDISI 6/2021. [Bulletin]

UTHM, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional April/2021. [Bulletin] (In Press)

UTHM, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional Februari/2021. [Bulletin] (In Press)

UTHM, FPTV (2021) Buletin Fakulti Pendidikan Teknikal & Vokasional Mac/2021. [Bulletin] (In Press)

UTHM, HEP (2021) Buletin Pejabat Hal Ehwal Pelajar April/2021. [Bulletin] (In Press)

UTHM, HEP (2021) Buletin Pejabat Hal Ehwal Pelajar Mac/2021. [Bulletin] (In Press)

UTHM, HEP (2021) Buletin Pejabat Hal Ehwal Pelajar Mei/2021. [Bulletin] (In Press)

UTHM, Hal Ehwal Pelajar (2021) Buletin Pejabat Hal Ehwal Pelajar Februari/2021. [Bulletin] (In Press)

UTHM, PKKA (2021) Buletin Pusat Kemajuan Kerjaya & Alumni April/2021. [Bulletin] (In Press)

UTHM, PKKA (2021) Buletin Pusat Kemajuan Kerjaya & Alumni Mac/2021. [Bulletin] (In Press)

UTHM, PKKA (2021) Buletin Pusat Kemajuan Kerjaya & Alumni Mei/2021. [Bulletin] (In Press)

UTHM, PPBA (2021) BULETIN CEC EDISI 4 | 2020. [Bulletin]

UTHM, RMC (2021) Buletin Pusat Pengurusan Penyelidikan (RMC) Jan-Mei/2021. [Bulletin] (In Press)

Ugochukwu, Solomon and M. Ridzuan, M. J. and Abdul Majid, M. S. and Cheng, E. M. and Razlan, Z. M. and Marsi, Noraini (2021) Effect of thermal ageing on the scratch resistance of natural-fibre-reinforced epoxy composites. Composite Structures, 261. pp. 1-8. ISSN 0263-8223

Ullah, Arif (2021) An improved dynamic load balancing for virtualmachines in cloud computing using hybrid bat and bee colony algorithms. Doctoral thesis, Universiti Tun Hussein Malaysia.

Usman, Hamza (2021) Modelling of commercial property market segmentation to improve price prediction accuracy in Malaysia. Doctoral thesis, Universiti Tun Hussein Malaysia.

Usman, Hamza and Lizam, Mohd and Burhan, Burhaida (2021) A priori spatial segmentation of commercial property market using hedonic price modelling. REAL ESTATE MANAGEMENT AND VALUATION, 29 (2). pp. 16-28.

Utomo, Hadi Prasetyo (2021) Modeling of substitution augmentation modification redefinition in academic information system education 3.0: a case study of sistem informasi akademik, Universitas Langlangbuana. Doctoral thesis, Universiti Tun Hussein Malaysia.

W

W. Almeshehe, Muataz and Murad, Noor Asniza and A. Rahim, Mohamad Kamal and Ayop, Osman and Zubir, Farid and Abd. Aziz, Mohamad Zoinol A. and N. Osman, Mohamed and A. Majid, H. (2021) Low loss waveguide-based Butler matrix with iris coupling control method for millimeterwave applications. Waves in Random and Complex Media. pp. 1-21.

W. Almeshehe, Muataz and Murad, Noor Asniza and A. Rahim, Mohamad Kamal and Ayop, Osman and Zubir, Farid and Abd. Aziz, Mohamad Zoinol A. and Osman, Mohamed N. and A. Majid, H. (2021) Low loss waveguide-based Butler matrix with iris coupling control method for millimeterwave applications. WAVES IN RANDOM AND COMPLEX MEDIA. pp. 1-21.

W. K., Lee and Abdullah, M. D. and P., Ong and Abdullah, H.Z. and Teo, Teo (2021) Prediction of flank wear and surface roughness by recurrent neural network in turning process. Journal of Advanced Manufacturing Technology (JAMT), 15 (1).

Wa Ays, Mohamed Mahad (2021) Economic feasibilty of solar powered street lighting system in Somalia. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Aziz, W. N. A. and Abu Bakar, M. F. and Abu Bakar, F. I. and Dheyab, A. S. and Sabran, S. F. and Kormin, F. (2021) Anti-gout potential of selected Malaysian local fruits. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Wan Hassan, Wan Azrul Shafuan (2021) Pembangunan laman web solveme berkonsepkan pembelajaran berasaskan masalah bagi kursus asas pengaturcaraan di politeknik. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Jamaludin, Wan Akashah (2021) Evaluation of a passive cooling system for embedded thermoelectric generator in concrete shingles for Renewable energy. Masters thesis, Universiti Tun Hussein Malaysia.

Wan Marzuki, Wan Nur Ain Syukriah (2021) Effect of nitrogen fertilization and harvesting period on phytochemical content and antioxidant activity of cymbopogon citratus. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Wan Muda, Wan Hanim Nadrah and Ab Halim, Fazlinda and Isa, Khairunesa and Md Nasir, Ahmad Nabil (2021) Leadership 4.0 In technical and vocational education and training institution. PSYCHOLOGY AND EDUCATION, 58 (3). pp. 3733-3739. ISSN 0033-3077

Wayrah, Mohamed Yusuf and Sarpin, Norliana and Mohamed, Sulzakimin and Masrom, Md. Asrul Nasid (2021) The impact of material management on construction project delivery in Somalia. Journal of Technology Management and Business, 8 (1). pp. 59-72. ISSN 2289-7224

Wee, Ling Tan and Samsudin, Mohd Ali and Ismail, Mohd Erfy and Ahmad, Nur Jahan and Abdul Talib, Corrienna (2021) Exploring the effectiveness of STEAM integrated approach via scratch on computational thinking. EURASIA Journal of Mathematics, Science and Technology Education, 17 (12). pp. 1-19.

Wei May, Lim (2021) The development of online checklist system for traffic impact assessment (e.c-tia) report submission in Malaysia. Masters thesis, Universiti Tun Hussein Malaysia.

Wen, Jun Ham and Ching, Theng Koh (2021) Electrospinning of aligned nanofibers for biomedical application using a rotating drum collector. Malaysian Journal of Microscopy, 17 (2). pp. 154-161. ISSN 1823-7010

Wsoo, Mohammed Ahmad and Abd Razak, Saiful Izwan and Mohd Bohari, Siti Pauliena and Shahir, Shafinaz and Salihu, Rabiu and Abdul Kadir, Mohammed Rafiq and Mat Nayan, Nadirul Hasraf (2021) Vitamin D3-loaded electrospun cellulose acetate/polycaprolactone nanofibers: Characterization, in-vitro drug release and cytotoxicity studies. International Journal of Biological Macromolecules, 181. pp. 82-98. ISSN 0141-8130

wer, er (2021) Preparation and characterization of irradiated magnetic pineapple leaves for paper production. In: SCIEMATHIC 2020, 1-2 December 2020, UTHM.

Y

Y. T., Lam and K. R., Kamarudin and M. Z., Zakaria and M. S. S., Omar and L., Tokiman and P. N. S., Jahari and F., Mohd Salleh (2021) Mitochondrial barcodes of dragonflies and damselflies originated from Taman Negara Endau Rompin, Johor, Malaysia. International Conference on Biodiversity 2020, 736. pp. 1-4.

Yaakub, Muhamad Faizal and Mohd Radzi, Mohd Amran and Asri, Maaspaliza and Shafie, Suhaidi and Azis, Norhafiz and Mohd Noh, Faridah Hanim (2021) LCL filter design based on ripple current minimization approach for grid-connected inverter application. IEEE.

Yahaya, Abdul Ahmed (2021) The effects of natural landscape elements in combating emerging desertification in Northern Nigeria. Doctoral thesis, Universiti Tun Hussein Malaysia.

Yahya, Mohd Shahir (2021) A contingency-based decision support instrument for selecting lean production tools and techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yahya, Mohd Shahir (2021) A contingency-based decision support instrument for selecting lean production tools and techniques. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yap, Xien Yin (2021) Calibration transfer in near infrared spectroscopic analysis using adaptive artificial neural network. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Yaseen, Muhammad (2021) A hybrid technique using minimal spanning tree and analytic hierarchical process to improve functional requirements prioritization. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Yee, M. H. and Mahmad, M. F. and Tee, T. K. and Kok, B. C. and N., Azid (2021) The level of Marzano higher-order thinking skills among polytechnic students. HONG KONG JOURNAL OF SOCIAL SCIENCES, 57. pp. 381-388.

Yeo, Kevin Jit Tong (2021) The stiffness and strength degradation of timber concrete composite slab deck under repeated loading. Masters thesis, Universiti Tun Hussein Malaysia.

Yin Lee, Jocelyn Ke and Gholami, Hamed and Mat Saman, Muhamad Zameri and Ngadiman, Nor Hasrul Akhmal and Zakuan, Norhayati and Mahmood, Salwa and Omain, Siti Zaleha (2021) Sustainability-oriented application of value stream mapping: a review and classification. Open Access Journal, 9. pp. 68414-68434.

Yunus, Faizal Amin Nur and Ahmad, Nur Athirah and Rahim, Mohd Bekri and Gerijih, Debie Devisser and Abdul Rahman, Khairul Anuar and Ali, Khairul Fahmi (2021) Reka bentuk semula produk menggunakan kaedah reka bentuk untuk pembuatan dan pemasangan melalui kejuruteraan balikan. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 32-48. ISBN 978-967-2817-45-1

Yunus, Faizal Amin Nur and Mohd Nazri, Khairul Akmal and Rahim, Mohd Bekri and Razali, Nizamuddin and Abdul Rahman, Khairul Anuar and Rozali, Zulfadli and Gerijih, Debie Devisser (2021) Development of refrigeration simulation to enhance teaching and learning for commercial refrigeration system. Research and Innovation in Technical and Vocational Education and Training, 1 (1). 013-022.

Yunus, Faizal Amin Nur and Mohd Nazri, Khairul Akmal and Rahim, Mohd Bekri and Razali, Nizamuddin and Abdul Rahman, Khairul Anuar and Rozali, Zulfadli and Gerijih, Debie Devisser (2021) Development of refrigeration simulation to enhance teaching and learning for commercial refrigeration system. In: https://doi.org/10.30880/ritvet.2021.01.01.003, Research and Innovation in Technical and Vocational Education and Training.

Yuriza, Yasmin and Tuan Ismail, Tuan Noor Hasanah and Mohamed, Ismail and Mat Hassan, Nik Normunira (2021) Characteristic properties of plastic wastes: possibility of reinforcing material for soil. Jurnal Teknologi, 83 (4). pp. 127-136.

Yusof, Muhammad Syahmi and Aznan, Nabila and Adull Manan, Nor Fazli and Marwan, Shahrul Hisyam and Mazlan, Muhammad Hazli and Abdul Halim Abdullah, Abdul Halim Abdullah (2021) Effects of varus and sagittal implant positioning to the stress adaptation in cementless hip arthroplasty. In: Malaysian Journal of Medicine and Health Sciences. Penerbit UPM, UPM, pp. 22-27.

Yusof, Yusliandy and Mohd Salleh, Kahirol and Che Him, Norziha and Rusiman, Mohd Saifullah (2021) Student evaluation towards educator performance for Technical College in Malaysia. In: SCIEMATHIC 2020, 1-2 DEC 2020, UTHM.

Yusoff, Siti Afiqah and Aman, Hannani (2021) Aplikasi pengurusan Dobi Berkat. Penerbit UTHM, UTHM.

Yusuf, Nuhu (2021) Terms interrelationship query expansion to improve accuracy of Quran search. Doctoral thesis, Universiti Tun Hussein Malaysia.

Z

Z., Embong and S., Shahudin and S., Hassan and M. S., Yusof and S., Mahzan and S., Shamsuddin and N. K., Othman and M. A. A., Mohd Salleh (2021) A study of geo-polymer as alternative material in automotive brake pad. In: AIP Conference Proceedings.

Z., Fatin and Othman, N. and Haris, H. and Najmuddin, M. F. and Indara Rahayu, M. N. and Md Zairi, Z. and M. A., Abdul-Latiff (2021) Perception of Subject Matter Experts (SMEs) on various curation and preservation techniques for the development of Natural History Gallery in Malaysia: a qualitative study. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Zahari, Balqis and Abdul Rahman, Khairul Anuar and Rahim, Mohd Bekri and Yunus, Faizal Amin Nur (2021) Cooling tower system as teaching aids tools for vocational college and Air Conditioning Technology Program. Research and Innovation in Technical and Vocational Education and Training, 1 (1). pp. 75-81.

Zaidon, Fazhrul Haqimee and Kassim, Karimah and Mohd Zaki, Hamizah and Embong, Zaidi and Anouar, El Hassane (2021) Adsorption and corrosion inhibition accomplishment for thiosemicarbazone derivatives for mild steel in 1.0 M HCl medium: Electrochemical, XPS and DFT studies. Journal of Molecular Liquids, 329. pp. 1-15.

Zainal, Zainab (2021) Yaw rate and sideslip control using h-infinity-pid controller during automated lane change manoeuver. Doctoral thesis, Universiti Sains Malaysia.

Zainol, Nur Zainatul Nadra and Abd Khalim, Mustapahayuddin and Wan Zahari, Wan Ainaa Mardhiah and Abdullah, Azlan Kuangit (2021) Peranan Majlis Agama Islam Negeri Johor semasa Perintah Kawalan Pergerakan (PKP) akibat Pandemik COVID-19. In: INSLA E-Proceedings, 27-28 Oktober 2021, USIM.

Zainuddin, Nur Ain and Zakaria, Normah and Ahmad, Muhammad Fazrulhelmi and Rubani, Siti Nur Kamariah and Hamzah, Norhasyimah and Ariffin, Arihasnida (2021) Mesin pengering asam keping. In: Pembangunan Produk & Reka Bentuk (Product Development & Design). Penerbit UTHM, UTHM, pp. 24-31. ISBN 978-967-2817-45-1

Zainul Abidin, Zainul Ameerul Ikhsan (2021) Development of a lab-scale hybrid vehicle system for small gasoline engine. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zakaria, Husna Afzan and Rusiman, Mohd Saifullah and Abdullah, Abdul Wahab and Shafi, Muhammad Ammar (2021) Time series analysis on mackerel (scombridae) landings in Malaysia. In: Enhanced Knowledge in Sciences and Technology.

Zakaria, Sazalina and R. Ahmad, Radin Diana and Abbas, Ahmad Rosly and Mohideen Batcha, Mohd Faizal and Zanil, Mohd Fauzi (2021) Stochastic type-2 fuzzy modelling on GHG emission prediction for gas-fired power plant. IOP.

Zakariah, Siti Hajar and Ahmad, Nor Aziah and Md Sabron, Nurdiyana (2021) Perception and acceptance of traditional Bugis food in Parit Raja. In: Catering & Hospitality Research (CHR). Penerbit UTHM, UTHM, pp. 67-75. ISBN 978-967-2975-96-0

Zalkepali @ Zulkefli, Noor Ummi Hazirah Hani (2021) Indium tin oxide-based Q-switched fiber laser generation and sensing application. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zaman, Gohar (2021) An ontological framework for information extraction using fuzzy rule-based system and word sense disambiguation. Doctoral thesis, Universiti Tun Hussein Onn Malaysia.

Zamri, Shafeeka Fadlikh (2021) The impact of lean six sigma practices based on industrial revolution 4.0 towards balanced scorecard indicators in Malaysia manufacturing sector. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zanalabidin, Nur Ain Shahira and Abd Aziz, Ruhaya (2021) Sistem pengurusan maklumat Ko-kurikulum SK To’ Uban. Penerbit UTHM, UTHM.

Zawawi, Rabiatul Adawiyah (2021) Study on structure, surface morphology, electrical and magnetic properties in monovalent doped Pr0.75Na0.25Mn1-xCrxO3 AND Nd0.75Na0.25Mn1-yCryO3 of magnetic ceramics. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zohari, Mohd Hakimi and Mohd Nazri, Mohd Fiqri (2021) GPS based vehicle tracking system. INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 10 (4). pp. 278-282. ISSN 2277-8616

Zohari, Mohd Hakimi and Mohd Nazri, Mohd Fiqri (2021) GPS based vehicle tracking system. INTERNATIONAL JOURNAL OF SCIENTIFIC & TECHNOLOGY RESEARCH, 10 (4). pp. 278-282. ISSN 2277-8616

Zulhazman, H. and Fizree, M. Asraf and Azahar, A. Muhamad and A. B., Mohd Fadzelly and A., Nazahatul Anis (2021) A survey on edible aroids consumed by locals in Kelantan, Peninsular Malaysia. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Zulhazman, H. and Fizree, M. Asraf and Azahar, A. Muhamad and A. B., Mohd Fadzelly and Anis, A. Nazahatul (2021) A survey on edible aroids consumed by locals in Kelantan, Peninsular Malaysia. In: International Conference on Biodiversity 2020, November 4-5, 2020, Melaka, Malaysia.

Zulkefli, Aina Syazwana (2021) Effect of operating parameter on membrane distillation performance using kapok fibre for humic acid treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkefli, Aina Syazwana (2021) Effect of operating parameter on membrane distillation performance using kapok fibre for humic acid treatment. Masters thesis, Universiti Tun Hussein Onn Malaysia.

Zulkefli, Nursyazwani and M. Yusup, Eliza and Othman, Mohd Hilmi (2021) A review: calcium carbonate (CaCO3) extract from natural ceramics for thin film application. In: AIP Conference Proceedings.

Zulkifle, Siti Liyana Amalina and Omar, Siti Sarah and Mahadi, Normahaza and Zainal Arifin, Zailin and Yaakop, Azizul Yadi (2021) A review of leadership approaches in the industrial revolution of 4.0 era. Online Journal for TVET Practitioners, 6 (2). pp. 21-27. ISSN 2289-7410